mmc: sdhci: SD tuning is broken for some controllers

The SD Host Controller spec states that the SD Host Controller can
request that the driver send up to 40 CMD19's while doing tuning
and that the total time the card spends responding must be < 150ms.
The sdhci_execute_tuning() function in sdhci.c that loops through
sending the CMD19's has multiple bugs. First it sets a "timeout"
variable to 150 and a loop counter variable to 40. It then decrements
both variables by 1 at the end of each loop. It tries to handle
violations of the count and time by doing a break when BOTH variables
are equal to zero, which can never happen because they we set to
different values and decremented by 1 at the same time. The timeout
variable is not based on time at all and is totally useless.
The routine also considers a loop counter of zero to be an error
which means that any controller that requests the max of 40 CMD19s
will cause tuning to fail and be disabled.

I've fixed these issues by allowing up to 40 CMD19's and I've removed
any attempt to handle the 150ms time limit. Removing timeout checking
seems safe here because each CMD19 is timeout protected and the max
loop counters insures we don't loop forever. Adding timeout checking
would not be as simple as snapping the time at the loop start and
checking for 150ms to pass because the loop queues the CMD19's and
uses events to wait for completion so the time would include
all the normal scheduler latencies.

Signed-off-by: Al Cooper <alcooperx@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>

1 files changed, 9 insertions, 15 deletions

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 447eef8217c..47055f3f01b 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1823,7 +1823,6 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
 	struct sdhci_host *host = mmc_priv(mmc);
 	u16 ctrl;
 	int tuning_loop_counter = MAX_TUNING_LOOP;
-	unsigned long timeout;
 	int err = 0;
 	unsigned long flags;
 
@@ -1882,14 +1881,10 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
 	 * Issue CMD19 repeatedly till Execute Tuning is set to 0 or the number
 	 * of loops reaches 40 times or a timeout of 150ms occurs.
 	 */
-	timeout = 150;
 	do {
 		struct mmc_command cmd = {0};
 		struct mmc_request mrq = {NULL};
 
-		if (!tuning_loop_counter && !timeout)
-			break;
-
 		cmd.opcode = opcode;
 		cmd.arg = 0;
 		cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
@@ -1897,6 +1892,9 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
 		cmd.data = NULL;
 		cmd.error = 0;
 
+		if (tuning_loop_counter-- == 0)
+			break;
+
 		mrq.cmd = &cmd;
 		host->mrq = &mrq;
 
@@ -1954,8 +1952,6 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
 		host->tuning_done = 0;
 
 		ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
-		tuning_loop_counter--;
-		timeout--;
 
 		/* eMMC spec does not require a delay between tuning cycles */
 		if (opcode == MMC_SEND_TUNING_BLOCK)
@@ -1966,17 +1962,15 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
 	 * The Host Driver has exhausted the maximum number of loops allowed,
 	 * so use fixed sampling frequency.
 	 */
-	if (!tuning_loop_counter || !timeout) {
+	if (tuning_loop_counter < 0) {
 		ctrl &= ~SDHCI_CTRL_TUNED_CLK;
 		sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
+	}
+	if (!(ctrl & SDHCI_CTRL_TUNED_CLK)) {
+		pr_info(DRIVER_NAME ": Tuning procedure"
+			" failed, falling back to fixed sampling"
+			" clock\n");
 		err = -EIO;
-	} else {
-		if (!(ctrl & SDHCI_CTRL_TUNED_CLK)) {
-			pr_info(DRIVER_NAME ": Tuning procedure"
-				" failed, falling back to fixed sampling"
-				" clock\n");
-			err = -EIO;
-		}
 	}
 
 out: