Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 1418 insertions, 0 deletions

diff --git a/drivers/mtd/chips/cfi_cmdset_0020.c b/drivers/mtd/chips/cfi_cmdset_0020.c
new file mode 100644
index 00000000000..8c24e18db3b
--- /dev/null
+++ b/drivers/mtd/chips/cfi_cmdset_0020.c
@@ -0,0 +1,1418 @@
+/*
+ * Common Flash Interface support:
+ *   ST Advanced Architecture Command Set (ID 0x0020)
+ *
+ * (C) 2000 Red Hat. GPL'd
+ *
+ * $Id: cfi_cmdset_0020.c,v 1.17 2004/11/20 12:49:04 dwmw2 Exp $
+ * 
+ * 10/10/2000	Nicolas Pitre <nico@cam.org>
+ * 	- completely revamped method functions so they are aware and
+ * 	  independent of the flash geometry (buswidth, interleave, etc.)
+ * 	- scalability vs code size is completely set at compile-time
+ * 	  (see include/linux/mtd/cfi.h for selection)
+ *	- optimized write buffer method
+ * 06/21/2002	Joern Engel <joern@wh.fh-wedel.de> and others
+ *	- modified Intel Command Set 0x0001 to support ST Advanced Architecture
+ *	  (command set 0x0020)
+ *	- added a writev function
+ */
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <asm/byteorder.h>
+
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/cfi.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/compatmac.h>
+
+
+static int cfi_staa_read(struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+static int cfi_staa_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+static int cfi_staa_writev(struct mtd_info *mtd, const struct kvec *vecs,
+		unsigned long count, loff_t to, size_t *retlen);
+static int cfi_staa_erase_varsize(struct mtd_info *, struct erase_info *);
+static void cfi_staa_sync (struct mtd_info *);
+static int cfi_staa_lock(struct mtd_info *mtd, loff_t ofs, size_t len);
+static int cfi_staa_unlock(struct mtd_info *mtd, loff_t ofs, size_t len);
+static int cfi_staa_suspend (struct mtd_info *);
+static void cfi_staa_resume (struct mtd_info *);
+
+static void cfi_staa_destroy(struct mtd_info *);
+
+struct mtd_info *cfi_cmdset_0020(struct map_info *, int);
+
+static struct mtd_info *cfi_staa_setup (struct map_info *);
+
+static struct mtd_chip_driver cfi_staa_chipdrv = {
+	.probe		= NULL, /* Not usable directly */
+	.destroy	= cfi_staa_destroy,
+	.name		= "cfi_cmdset_0020",
+	.module		= THIS_MODULE
+};
+
+/* #define DEBUG_LOCK_BITS */
+//#define DEBUG_CFI_FEATURES
+
+#ifdef DEBUG_CFI_FEATURES
+static void cfi_tell_features(struct cfi_pri_intelext *extp)
+{
+        int i;
+        printk("  Feature/Command Support: %4.4X\n", extp->FeatureSupport);
+	printk("     - Chip Erase:         %s\n", extp->FeatureSupport&1?"supported":"unsupported");
+	printk("     - Suspend Erase:      %s\n", extp->FeatureSupport&2?"supported":"unsupported");
+	printk("     - Suspend Program:    %s\n", extp->FeatureSupport&4?"supported":"unsupported");
+	printk("     - Legacy Lock/Unlock: %s\n", extp->FeatureSupport&8?"supported":"unsupported");
+	printk("     - Queued Erase:       %s\n", extp->FeatureSupport&16?"supported":"unsupported");
+	printk("     - Instant block lock: %s\n", extp->FeatureSupport&32?"supported":"unsupported");
+	printk("     - Protection Bits:    %s\n", extp->FeatureSupport&64?"supported":"unsupported");
+	printk("     - Page-mode read:     %s\n", extp->FeatureSupport&128?"supported":"unsupported");
+	printk("     - Synchronous read:   %s\n", extp->FeatureSupport&256?"supported":"unsupported");
+	for (i=9; i<32; i++) {
+		if (extp->FeatureSupport & (1<<i)) 
+			printk("     - Unknown Bit %X:      supported\n", i);
+	}
+	
+	printk("  Supported functions after Suspend: %2.2X\n", extp->SuspendCmdSupport);
+	printk("     - Program after Erase Suspend: %s\n", extp->SuspendCmdSupport&1?"supported":"unsupported");
+	for (i=1; i<8; i++) {
+		if (extp->SuspendCmdSupport & (1<<i))
+			printk("     - Unknown Bit %X:               supported\n", i);
+	}
+	
+	printk("  Block Status Register Mask: %4.4X\n", extp->BlkStatusRegMask);
+	printk("     - Lock Bit Active:      %s\n", extp->BlkStatusRegMask&1?"yes":"no");
+	printk("     - Valid Bit Active:     %s\n", extp->BlkStatusRegMask&2?"yes":"no");
+	for (i=2; i<16; i++) {
+		if (extp->BlkStatusRegMask & (1<<i))
+			printk("     - Unknown Bit %X Active: yes\n",i);
+	}
+	
+	printk("  Vcc Logic Supply Optimum Program/Erase Voltage: %d.%d V\n", 
+	       extp->VccOptimal >> 8, extp->VccOptimal & 0xf);
+	if (extp->VppOptimal)
+		printk("  Vpp Programming Supply Optimum Program/Erase Voltage: %d.%d V\n", 
+		       extp->VppOptimal >> 8, extp->VppOptimal & 0xf);
+}
+#endif
+
+/* This routine is made available to other mtd code via
+ * inter_module_register.  It must only be accessed through
+ * inter_module_get which will bump the use count of this module.  The
+ * addresses passed back in cfi are valid as long as the use count of
+ * this module is non-zero, i.e. between inter_module_get and
+ * inter_module_put.  Keith Owens <kaos@ocs.com.au> 29 Oct 2000.
+ */
+struct mtd_info *cfi_cmdset_0020(struct map_info *map, int primary)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
+	int i;
+
+	if (cfi->cfi_mode) {
+		/* 
+		 * It's a real CFI chip, not one for which the probe
+		 * routine faked a CFI structure. So we read the feature
+		 * table from it.
+		 */
+		__u16 adr = primary?cfi->cfiq->P_ADR:cfi->cfiq->A_ADR;
+		struct cfi_pri_intelext *extp;
+
+		extp = (struct cfi_pri_intelext*)cfi_read_pri(map, adr, sizeof(*extp), "ST Microelectronics");
+		if (!extp)
+			return NULL;
+
+		/* Do some byteswapping if necessary */
+		extp->FeatureSupport = cfi32_to_cpu(extp->FeatureSupport);
+		extp->BlkStatusRegMask = cfi32_to_cpu(extp->BlkStatusRegMask);
+		
+#ifdef DEBUG_CFI_FEATURES
+		/* Tell the user about it in lots of lovely detail */
+		cfi_tell_features(extp);
+#endif	
+
+		/* Install our own private info structure */
+		cfi->cmdset_priv = extp;
+	}	
+
+	for (i=0; i< cfi->numchips; i++) {
+		cfi->chips[i].word_write_time = 128;
+		cfi->chips[i].buffer_write_time = 128;
+		cfi->chips[i].erase_time = 1024;
+	}		
+
+	return cfi_staa_setup(map);
+}
+
+static struct mtd_info *cfi_staa_setup(struct map_info *map)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
+	struct mtd_info *mtd;
+	unsigned long offset = 0;
+	int i,j;
+	unsigned long devsize = (1<<cfi->cfiq->DevSize) * cfi->interleave;
+
+	mtd = kmalloc(sizeof(*mtd), GFP_KERNEL);
+	//printk(KERN_DEBUG "number of CFI chips: %d\n", cfi->numchips);
+
+	if (!mtd) {
+		printk(KERN_ERR "Failed to allocate memory for MTD device\n");
+		kfree(cfi->cmdset_priv);
+		return NULL;
+	}
+
+	memset(mtd, 0, sizeof(*mtd));
+	mtd->priv = map;
+	mtd->type = MTD_NORFLASH;
+	mtd->size = devsize * cfi->numchips;
+
+	mtd->numeraseregions = cfi->cfiq->NumEraseRegions * cfi->numchips;
+	mtd->eraseregions = kmalloc(sizeof(struct mtd_erase_region_info) 
+			* mtd->numeraseregions, GFP_KERNEL);
+	if (!mtd->eraseregions) { 
+		printk(KERN_ERR "Failed to allocate memory for MTD erase region info\n");
+		kfree(cfi->cmdset_priv);
+		kfree(mtd);
+		return NULL;
+	}
+	
+	for (i=0; i<cfi->cfiq->NumEraseRegions; i++) {
+		unsigned long ernum, ersize;
+		ersize = ((cfi->cfiq->EraseRegionInfo[i] >> 8) & ~0xff) * cfi->interleave;
+		ernum = (cfi->cfiq->EraseRegionInfo[i] & 0xffff) + 1;
+
+		if (mtd->erasesize < ersize) {
+			mtd->erasesize = ersize;
+		}
+		for (j=0; j<cfi->numchips; j++) {
+			mtd->eraseregions[(j*cfi->cfiq->NumEraseRegions)+i].offset = (j*devsize)+offset;
+			mtd->eraseregions[(j*cfi->cfiq->NumEraseRegions)+i].erasesize = ersize;
+			mtd->eraseregions[(j*cfi->cfiq->NumEraseRegions)+i].numblocks = ernum;
+		}
+		offset += (ersize * ernum);
+		}
+
+		if (offset != devsize) {
+			/* Argh */
+			printk(KERN_WARNING "Sum of regions (%lx) != total size of set of interleaved chips (%lx)\n", offset, devsize);
+			kfree(mtd->eraseregions);
+			kfree(cfi->cmdset_priv);
+			kfree(mtd);
+			return NULL;
+		}
+
+		for (i=0; i<mtd->numeraseregions;i++){
+			printk(KERN_DEBUG "%d: offset=0x%x,size=0x%x,blocks=%d\n",
+			       i,mtd->eraseregions[i].offset,
+			       mtd->eraseregions[i].erasesize,
+			       mtd->eraseregions[i].numblocks);
+		}
+
+	/* Also select the correct geometry setup too */ 
+	mtd->erase = cfi_staa_erase_varsize;
+	mtd->read = cfi_staa_read;
+        mtd->write = cfi_staa_write_buffers;
+	mtd->writev = cfi_staa_writev;
+	mtd->sync = cfi_staa_sync;
+	mtd->lock = cfi_staa_lock;
+	mtd->unlock = cfi_staa_unlock;
+	mtd->suspend = cfi_staa_suspend;
+	mtd->resume = cfi_staa_resume;
+	mtd->flags = MTD_CAP_NORFLASH;
+	mtd->flags |= MTD_ECC; /* FIXME: Not all STMicro flashes have this */
+	mtd->eccsize = 8; /* FIXME: Should be 0 for STMicro flashes w/out ECC */
+	map->fldrv = &cfi_staa_chipdrv;
+	__module_get(THIS_MODULE);
+	mtd->name = map->name;
+	return mtd;
+}
+
+
+static inline int do_read_onechip(struct map_info *map, struct flchip *chip, loff_t adr, size_t len, u_char *buf)
+{
+	map_word status, status_OK;
+	unsigned long timeo;
+	DECLARE_WAITQUEUE(wait, current);
+	int suspended = 0;
+	unsigned long cmd_addr;
+	struct cfi_private *cfi = map->fldrv_priv;
+
+	adr += chip->start;
+
+	/* Ensure cmd read/writes are aligned. */ 
+	cmd_addr = adr & ~(map_bankwidth(map)-1); 
+
+	/* Let's determine this according to the interleave only once */
+	status_OK = CMD(0x80);
+
+	timeo = jiffies + HZ;
+ retry:
+	spin_lock_bh(chip->mutex);
+
+	/* Check that the chip's ready to talk to us.
+	 * If it's in FL_ERASING state, suspend it and make it talk now.
+	 */
+	switch (chip->state) {
+	case FL_ERASING:
+		if (!(((struct cfi_pri_intelext *)cfi->cmdset_priv)->FeatureSupport & 2))
+			goto sleep; /* We don't support erase suspend */
+		
+		map_write (map, CMD(0xb0), cmd_addr);
+		/* If the flash has finished erasing, then 'erase suspend'
+		 * appears to make some (28F320) flash devices switch to
+		 * 'read' mode.  Make sure that we switch to 'read status'
+		 * mode so we get the right data. --rmk
+		 */
+		map_write(map, CMD(0x70), cmd_addr);
+		chip->oldstate = FL_ERASING;
+		chip->state = FL_ERASE_SUSPENDING;
+		//		printk("Erase suspending at 0x%lx\n", cmd_addr);
+		for (;;) {
+			status = map_read(map, cmd_addr);
+			if (map_word_andequal(map, status, status_OK, status_OK))
+				break;
+			
+			if (time_after(jiffies, timeo)) {
+				/* Urgh */
+				map_write(map, CMD(0xd0), cmd_addr);
+				/* make sure we're in 'read status' mode */
+				map_write(map, CMD(0x70), cmd_addr);
+				chip->state = FL_ERASING;
+				spin_unlock_bh(chip->mutex);
+				printk(KERN_ERR "Chip not ready after erase "
+				       "suspended: status = 0x%lx\n", status.x[0]);
+				return -EIO;
+			}
+			
+			spin_unlock_bh(chip->mutex);
+			cfi_udelay(1);
+			spin_lock_bh(chip->mutex);
+		}
+		
+		suspended = 1;
+		map_write(map, CMD(0xff), cmd_addr);
+		chip->state = FL_READY;
+		break;
+	
+#if 0
+	case FL_WRITING:
+		/* Not quite yet */
+#endif
+
+	case FL_READY:
+		break;
+
+	case FL_CFI_QUERY:
+	case FL_JEDEC_QUERY:
+		map_write(map, CMD(0x70), cmd_addr);
+		chip->state = FL_STATUS;
+
+	case FL_STATUS:
+		status = map_read(map, cmd_addr);
+		if (map_word_andequal(map, status, status_OK, status_OK)) {
+			map_write(map, CMD(0xff), cmd_addr);
+			chip->state = FL_READY;
+			break;
+		}
+		
+		/* Urgh. Chip not yet ready to talk to us. */
+		if (time_after(jiffies, timeo)) {
+			spin_unlock_bh(chip->mutex);
+			printk(KERN_ERR "waiting for chip to be ready timed out in read. WSM status = %lx\n", status.x[0]);
+			return -EIO;
+		}
+
+		/* Latency issues. Drop the lock, wait a while and retry */
+		spin_unlock_bh(chip->mutex);
+		cfi_udelay(1);
+		goto retry;
+
+	default:
+	sleep:
+		/* Stick ourselves on a wait queue to be woken when
+		   someone changes the status */
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		add_wait_queue(&chip->wq, &wait);
+		spin_unlock_bh(chip->mutex);
+		schedule();
+		remove_wait_queue(&chip->wq, &wait);
+		timeo = jiffies + HZ;
+		goto retry;
+	}
+
+	map_copy_from(map, buf, adr, len);
+
+	if (suspended) {
+		chip->state = chip->oldstate;
+		/* What if one interleaved chip has finished and the 
+		   other hasn't? The old code would leave the finished
+		   one in READY mode. That's bad, and caused -EROFS 
+		   errors to be returned from do_erase_oneblock because
+		   that's the only bit it checked for at the time.
+		   As the state machine appears to explicitly allow 
+		   sending the 0x70 (Read Status) command to an erasing
+		   chip and expecting it to be ignored, that's what we 
+		   do. */
+		map_write(map, CMD(0xd0), cmd_addr);
+		map_write(map, CMD(0x70), cmd_addr);		
+	}
+
+	wake_up(&chip->wq);
+	spin_unlock_bh(chip->mutex);
+	return 0;
+}
+
+static int cfi_staa_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	unsigned long ofs;
+	int chipnum;
+	int ret = 0;
+
+	/* ofs: offset within the first chip that the first read should start */
+	chipnum = (from >> cfi->chipshift);
+	ofs = from - (chipnum <<  cfi->chipshift);
+
+	*retlen = 0;
+
+	while (len) {
+		unsigned long thislen;
+
+		if (chipnum >= cfi->numchips)
+			break;
+
+		if ((len + ofs -1) >> cfi->chipshift)
+			thislen = (1<<cfi->chipshift) - ofs;
+		else
+			thislen = len;
+
+		ret = do_read_onechip(map, &cfi->chips[chipnum], ofs, thislen, buf);
+		if (ret)
+			break;
+
+		*retlen += thislen;
+		len -= thislen;
+		buf += thislen;
+		
+		ofs = 0;
+		chipnum++;
+	}
+	return ret;
+}
+
+static inline int do_write_buffer(struct map_info *map, struct flchip *chip, 
+				  unsigned long adr, const u_char *buf, int len)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
+	map_word status, status_OK;
+	unsigned long cmd_adr, timeo;
+	DECLARE_WAITQUEUE(wait, current);
+	int wbufsize, z;
+        
+        /* M58LW064A requires bus alignment for buffer wriets -- saw */
+        if (adr & (map_bankwidth(map)-1))
+            return -EINVAL;
+
+        wbufsize = cfi_interleave(cfi) << cfi->cfiq->MaxBufWriteSize;
+        adr += chip->start;
+	cmd_adr = adr & ~(wbufsize-1);
+	
+	/* Let's determine this according to the interleave only once */
+        status_OK = CMD(0x80);
+        
+	timeo = jiffies + HZ;
+ retry:
+
+#ifdef DEBUG_CFI_FEATURES
+       printk("%s: chip->state[%d]\n", __FUNCTION__, chip->state);
+#endif
+	spin_lock_bh(chip->mutex);
+ 
+	/* Check that the chip's ready to talk to us.
+	 * Later, we can actually think about interrupting it
+	 * if it's in FL_ERASING state.
+	 * Not just yet, though.
+	 */
+	switch (chip->state) {
+	case FL_READY:
+		break;
+		
+	case FL_CFI_QUERY:
+	case FL_JEDEC_QUERY:
+		map_write(map, CMD(0x70), cmd_adr);
+                chip->state = FL_STATUS;
+#ifdef DEBUG_CFI_FEATURES
+        printk("%s: 1 status[%x]\n", __FUNCTION__, map_read(map, cmd_adr));
+#endif
+
+	case FL_STATUS:
+		status = map_read(map, cmd_adr);
+		if (map_word_andequal(map, status, status_OK, status_OK))
+			break;
+		/* Urgh. Chip not yet ready to talk to us. */
+		if (time_after(jiffies, timeo)) {
+			spin_unlock_bh(chip->mutex);
+                        printk(KERN_ERR "waiting for chip to be ready timed out in buffer write Xstatus = %lx, status = %lx\n",
+                               status.x[0], map_read(map, cmd_adr).x[0]);
+			return -EIO;
+		}
+
+		/* Latency issues. Drop the lock, wait a while and retry */
+		spin_unlock_bh(chip->mutex);
+		cfi_udelay(1);
+		goto retry;
+
+	default:
+		/* Stick ourselves on a wait queue to be woken when
+		   someone changes the status */
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		add_wait_queue(&chip->wq, &wait);
+		spin_unlock_bh(chip->mutex);
+		schedule();
+		remove_wait_queue(&chip->wq, &wait);
+		timeo = jiffies + HZ;
+		goto retry;
+	}
+
+	ENABLE_VPP(map);
+	map_write(map, CMD(0xe8), cmd_adr);
+	chip->state = FL_WRITING_TO_BUFFER;
+
+	z = 0;
+	for (;;) {
+		status = map_read(map, cmd_adr);
+		if (map_word_andequal(map, status, status_OK, status_OK))
+			break;
+
+		spin_unlock_bh(chip->mutex);
+		cfi_udelay(1);
+		spin_lock_bh(chip->mutex);
+
+		if (++z > 100) {
+			/* Argh. Not ready for write to buffer */
+			DISABLE_VPP(map);
+                        map_write(map, CMD(0x70), cmd_adr);
+			chip->state = FL_STATUS;
+			spin_unlock_bh(chip->mutex);
+			printk(KERN_ERR "Chip not ready for buffer write. Xstatus = %lx\n", status.x[0]);
+			return -EIO;
+		}
+	}
+
+	/* Write length of data to come */
+	map_write(map, CMD(len/map_bankwidth(map)-1), cmd_adr );
+        
+	/* Write data */
+	for (z = 0; z < len;
+	     z += map_bankwidth(map), buf += map_bankwidth(map)) {
+		map_word d;
+		d = map_word_load(map, buf);
+		map_write(map, d, adr+z);
+	}
+	/* GO GO GO */
+	map_write(map, CMD(0xd0), cmd_adr);
+	chip->state = FL_WRITING;
+
+	spin_unlock_bh(chip->mutex);
+	cfi_udelay(chip->buffer_write_time);
+	spin_lock_bh(chip->mutex);
+
+	timeo = jiffies + (HZ/2);
+	z = 0;
+	for (;;) {
+		if (chip->state != FL_WRITING) {
+			/* Someone's suspended the write. Sleep */
+			set_current_state(TASK_UNINTERRUPTIBLE);
+			add_wait_queue(&chip->wq, &wait);
+			spin_unlock_bh(chip->mutex);
+			schedule();
+			remove_wait_queue(&chip->wq, &wait);
+			timeo = jiffies + (HZ / 2); /* FIXME */
+			spin_lock_bh(chip->mutex);
+			continue;
+		}
+
+		status = map_read(map, cmd_adr);
+		if (map_word_andequal(map, status, status_OK, status_OK))
+			break;
+
+		/* OK Still waiting */
+		if (time_after(jiffies, timeo)) {
+                        /* clear status */
+                        map_write(map, CMD(0x50), cmd_adr);
+                        /* put back into read status register mode */
+                        map_write(map, CMD(0x70), adr);
+			chip->state = FL_STATUS;
+			DISABLE_VPP(map);
+			spin_unlock_bh(chip->mutex);
+			printk(KERN_ERR "waiting for chip to be ready timed out in bufwrite\n");
+			return -EIO;
+		}
+		
+		/* Latency issues. Drop the lock, wait a while and retry */
+		spin_unlock_bh(chip->mutex);
+		cfi_udelay(1);
+		z++;
+		spin_lock_bh(chip->mutex);
+	}
+	if (!z) {
+		chip->buffer_write_time--;
+		if (!chip->buffer_write_time)
+			chip->buffer_write_time++;
+	}
+	if (z > 1) 
+		chip->buffer_write_time++;
+        
+	/* Done and happy. */
+	DISABLE_VPP(map);
+	chip->state = FL_STATUS;
+
+        /* check for errors: 'lock bit', 'VPP', 'dead cell'/'unerased cell' or 'incorrect cmd' -- saw */
+        if (map_word_bitsset(map, status, CMD(0x3a))) {
+#ifdef DEBUG_CFI_FEATURES
+		printk("%s: 2 status[%lx]\n", __FUNCTION__, status.x[0]);
+#endif
+		/* clear status */
+		map_write(map, CMD(0x50), cmd_adr);
+		/* put back into read status register mode */
+		map_write(map, CMD(0x70), adr);
+		wake_up(&chip->wq);
+		spin_unlock_bh(chip->mutex);
+		return map_word_bitsset(map, status, CMD(0x02)) ? -EROFS : -EIO;
+	}
+	wake_up(&chip->wq);
+	spin_unlock_bh(chip->mutex);
+
+        return 0;
+}
+
+static int cfi_staa_write_buffers (struct mtd_info *mtd, loff_t to, 
+				       size_t len, size_t *retlen, const u_char *buf)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	int wbufsize = cfi_interleave(cfi) << cfi->cfiq->MaxBufWriteSize;
+	int ret = 0;
+	int chipnum;
+	unsigned long ofs;
+
+	*retlen = 0;
+	if (!len)
+		return 0;
+
+	chipnum = to >> cfi->chipshift;
+	ofs = to  - (chipnum << cfi->chipshift);
+
+#ifdef DEBUG_CFI_FEATURES
+        printk("%s: map_bankwidth(map)[%x]\n", __FUNCTION__, map_bankwidth(map));
+        printk("%s: chipnum[%x] wbufsize[%x]\n", __FUNCTION__, chipnum, wbufsize);
+        printk("%s: ofs[%x] len[%x]\n", __FUNCTION__, ofs, len);
+#endif
+        
+        /* Write buffer is worth it only if more than one word to write... */
+        while (len > 0) {
+		/* We must not cross write block boundaries */
+		int size = wbufsize - (ofs & (wbufsize-1));
+
+                if (size > len)
+                    size = len;
+
+                ret = do_write_buffer(map, &cfi->chips[chipnum], 
+				      ofs, buf, size);
+		if (ret)
+			return ret;
+
+		ofs += size;
+		buf += size;
+		(*retlen) += size;
+		len -= size;
+
+		if (ofs >> cfi->chipshift) {
+			chipnum ++; 
+			ofs = 0;
+			if (chipnum == cfi->numchips)
+				return 0;
+		}
+	}
+        
+	return 0;
+}
+
+/*
+ * Writev for ECC-Flashes is a little more complicated. We need to maintain
+ * a small buffer for this.
+ * XXX: If the buffer size is not a multiple of 2, this will break
+ */
+#define ECCBUF_SIZE (mtd->eccsize)
+#define ECCBUF_DIV(x) ((x) & ~(ECCBUF_SIZE - 1))
+#define ECCBUF_MOD(x) ((x) &  (ECCBUF_SIZE - 1))
+static int
+cfi_staa_writev(struct mtd_info *mtd, const struct kvec *vecs,
+		unsigned long count, loff_t to, size_t *retlen)
+{
+	unsigned long i;
+	size_t	 totlen = 0, thislen;
+	int	 ret = 0;
+	size_t	 buflen = 0;
+	static char *buffer;
+
+	if (!ECCBUF_SIZE) {
+		/* We should fall back to a general writev implementation.
+		 * Until that is written, just break.
+		 */
+		return -EIO;
+	}
+	buffer = kmalloc(ECCBUF_SIZE, GFP_KERNEL);
+	if (!buffer)
+		return -ENOMEM;
+
+	for (i=0; i<count; i++) {
+		size_t elem_len = vecs[i].iov_len;
+		void *elem_base = vecs[i].iov_base;
+		if (!elem_len) /* FIXME: Might be unnecessary. Check that */
+			continue;
+		if (buflen) { /* cut off head */
+			if (buflen + elem_len < ECCBUF_SIZE) { /* just accumulate */
+				memcpy(buffer+buflen, elem_base, elem_len);
+				buflen += elem_len;
+				continue;
+			}
+			memcpy(buffer+buflen, elem_base, ECCBUF_SIZE-buflen);
+			ret = mtd->write(mtd, to, ECCBUF_SIZE, &thislen, buffer);
+			totlen += thislen;
+			if (ret || thislen != ECCBUF_SIZE)
+				goto write_error;
+			elem_len -= thislen-buflen;
+			elem_base += thislen-buflen;
+			to += ECCBUF_SIZE;
+		}
+		if (ECCBUF_DIV(elem_len)) { /* write clean aligned data */
+			ret = mtd->write(mtd, to, ECCBUF_DIV(elem_len), &thislen, elem_base);
+			totlen += thislen;
+			if (ret || thislen != ECCBUF_DIV(elem_len))
+				goto write_error;
+			to += thislen;
+		}
+		buflen = ECCBUF_MOD(elem_len); /* cut off tail */
+		if (buflen) {
+			memset(buffer, 0xff, ECCBUF_SIZE);
+			memcpy(buffer, elem_base + thislen, buflen);
+		}
+	}
+	if (buflen) { /* flush last page, even if not full */
+		/* This is sometimes intended behaviour, really */
+		ret = mtd->write(mtd, to, buflen, &thislen, buffer);
+		totlen += thislen;
+		if (ret || thislen != ECCBUF_SIZE)
+			goto write_error;
+	}
+write_error:
+	if (retlen)
+		*retlen = totlen;
+	return ret;
+}
+
+
+static inline int do_erase_oneblock(struct map_info *map, struct flchip *chip, unsigned long adr)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
+	map_word status, status_OK;
+	unsigned long timeo;
+	int retries = 3;
+	DECLARE_WAITQUEUE(wait, current);
+	int ret = 0;
+
+	adr += chip->start;
+
+	/* Let's determine this according to the interleave only once */
+	status_OK = CMD(0x80);
+
+	timeo = jiffies + HZ;
+retry:
+	spin_lock_bh(chip->mutex);
+
+	/* Check that the chip's ready to talk to us. */
+	switch (chip->state) {
+	case FL_CFI_QUERY:
+	case FL_JEDEC_QUERY:
+	case FL_READY:
+		map_write(map, CMD(0x70), adr);
+		chip->state = FL_STATUS;
+
+	case FL_STATUS:
+		status = map_read(map, adr);
+		if (map_word_andequal(map, status, status_OK, status_OK))
+			break;
+		
+		/* Urgh. Chip not yet ready to talk to us. */
+		if (time_after(jiffies, timeo)) {
+			spin_unlock_bh(chip->mutex);
+			printk(KERN_ERR "waiting for chip to be ready timed out in erase\n");
+			return -EIO;
+		}
+
+		/* Latency issues. Drop the lock, wait a while and retry */
+		spin_unlock_bh(chip->mutex);
+		cfi_udelay(1);
+		goto retry;
+
+	default:
+		/* Stick ourselves on a wait queue to be woken when
+		   someone changes the status */
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		add_wait_queue(&chip->wq, &wait);
+		spin_unlock_bh(chip->mutex);
+		schedule();
+		remove_wait_queue(&chip->wq, &wait);
+		timeo = jiffies + HZ;
+		goto retry;
+	}
+
+	ENABLE_VPP(map);
+	/* Clear the status register first */
+	map_write(map, CMD(0x50), adr);
+
+	/* Now erase */
+	map_write(map, CMD(0x20), adr);
+	map_write(map, CMD(0xD0), adr);
+	chip->state = FL_ERASING;
+	
+	spin_unlock_bh(chip->mutex);
+	msleep(1000);
+	spin_lock_bh(chip->mutex);
+
+	/* FIXME. Use a timer to check this, and return immediately. */
+	/* Once the state machine's known to be working I'll do that */
+
+	timeo = jiffies + (HZ*20);
+	for (;;) {
+		if (chip->state != FL_ERASING) {
+			/* Someone's suspended the erase. Sleep */
+			set_current_state(TASK_UNINTERRUPTIBLE);
+			add_wait_queue(&chip->wq, &wait);
+			spin_unlock_bh(chip->mutex);
+			schedule();
+			remove_wait_queue(&chip->wq, &wait);
+			timeo = jiffies + (HZ*20); /* FIXME */
+			spin_lock_bh(chip->mutex);
+			continue;
+		}
+
+		status = map_read(map, adr);
+		if (map_word_andequal(map, status, status_OK, status_OK))
+			break;
+		
+		/* OK Still waiting */
+		if (time_after(jiffies, timeo)) {
+			map_write(map, CMD(0x70), adr);
+			chip->state = FL_STATUS;
+			printk(KERN_ERR "waiting for erase to complete timed out. Xstatus = %lx, status = %lx.\n", status.x[0], map_read(map, adr).x[0]);
+			DISABLE_VPP(map);
+			spin_unlock_bh(chip->mutex);
+			return -EIO;
+		}
+		
+		/* Latency issues. Drop the lock, wait a while and retry */
+		spin_unlock_bh(chip->mutex);
+		cfi_udelay(1);
+		spin_lock_bh(chip->mutex);
+	}
+	
+	DISABLE_VPP(map);
+	ret = 0;
+
+	/* We've broken this before. It doesn't hurt to be safe */
+	map_write(map, CMD(0x70), adr);
+	chip->state = FL_STATUS;
+	status = map_read(map, adr);
+
+	/* check for lock bit */
+	if (map_word_bitsset(map, status, CMD(0x3a))) {
+		unsigned char chipstatus = status.x[0];
+		if (!map_word_equal(map, status, CMD(chipstatus))) {
+			int i, w;
+			for (w=0; w<map_words(map); w++) {
+				for (i = 0; i<cfi_interleave(cfi); i++) {
+					chipstatus |= status.x[w] >> (cfi->device_type * 8);
+				}
+			}
+			printk(KERN_WARNING "Status is not identical for all chips: 0x%lx. Merging to give 0x%02x\n",
+			       status.x[0], chipstatus);
+		}
+		/* Reset the error bits */
+		map_write(map, CMD(0x50), adr);
+		map_write(map, CMD(0x70), adr);
+		
+		if ((chipstatus & 0x30) == 0x30) {
+			printk(KERN_NOTICE "Chip reports improper command sequence: status 0x%x\n", chipstatus);
+			ret = -EIO;
+		} else if (chipstatus & 0x02) {
+			/* Protection bit set */
+			ret = -EROFS;
+		} else if (chipstatus & 0x8) {
+			/* Voltage */
+			printk(KERN_WARNING "Chip reports voltage low on erase: status 0x%x\n", chipstatus);
+			ret = -EIO;
+		} else if (chipstatus & 0x20) {
+			if (retries--) {
+				printk(KERN_DEBUG "Chip erase failed at 0x%08lx: status 0x%x. Retrying...\n", adr, chipstatus);
+				timeo = jiffies + HZ;
+				chip->state = FL_STATUS;
+				spin_unlock_bh(chip->mutex);
+				goto retry;
+			}
+			printk(KERN_DEBUG "Chip erase failed at 0x%08lx: status 0x%x\n", adr, chipstatus);
+			ret = -EIO;
+		}
+	}
+
+	wake_up(&chip->wq);
+	spin_unlock_bh(chip->mutex);
+	return ret;
+}
+
+int cfi_staa_erase_varsize(struct mtd_info *mtd, struct erase_info *instr)
+{	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	unsigned long adr, len;
+	int chipnum, ret = 0;
+	int i, first;
+	struct mtd_erase_region_info *regions = mtd->eraseregions;
+
+	if (instr->addr > mtd->size)
+		return -EINVAL;
+
+	if ((instr->len + instr->addr) > mtd->size)
+		return -EINVAL;
+
+	/* Check that both start and end of the requested erase are
+	 * aligned with the erasesize at the appropriate addresses.
+	 */
+
+	i = 0;
+
+	/* Skip all erase regions which are ended before the start of 
+	   the requested erase. Actually, to save on the calculations,
+	   we skip to the first erase region which starts after the
+	   start of the requested erase, and then go back one.
+	*/
+	
+	while (i < mtd->numeraseregions && instr->addr >= regions[i].offset)
+	       i++;
+	i--;
+
+	/* OK, now i is pointing at the erase region in which this 
+	   erase request starts. Check the start of the requested
+	   erase range is aligned with the erase size which is in
+	   effect here.
+	*/
+
+	if (instr->addr & (regions[i].erasesize-1))
+		return -EINVAL;
+
+	/* Remember the erase region we start on */
+	first = i;
+
+	/* Next, check that the end of the requested erase is aligned
+	 * with the erase region at that address.
+	 */
+
+	while (i<mtd->numeraseregions && (instr->addr + instr->len) >= regions[i].offset)
+		i++;
+
+	/* As before, drop back one to point at the region in which
+	   the address actually falls
+	*/
+	i--;
+	
+	if ((instr->addr + instr->len) & (regions[i].erasesize-1))
+		return -EINVAL;
+
+	chipnum = instr->addr >> cfi->chipshift;
+	adr = instr->addr - (chipnum << cfi->chipshift);
+	len = instr->len;
+
+	i=first;
+
+	while(len) {
+		ret = do_erase_oneblock(map, &cfi->chips[chipnum], adr);
+		
+		if (ret)
+			return ret;
+
+		adr += regions[i].erasesize;
+		len -= regions[i].erasesize;
+
+		if (adr % (1<< cfi->chipshift) == ((regions[i].offset + (regions[i].erasesize * regions[i].numblocks)) %( 1<< cfi->chipshift)))
+			i++;
+
+		if (adr >> cfi->chipshift) {
+			adr = 0;
+			chipnum++;
+			
+			if (chipnum >= cfi->numchips)
+			break;
+		}
+	}
+		
+	instr->state = MTD_ERASE_DONE;
+	mtd_erase_callback(instr);
+	
+	return 0;
+}
+
+static void cfi_staa_sync (struct mtd_info *mtd)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	int i;
+	struct flchip *chip;
+	int ret = 0;
+	DECLARE_WAITQUEUE(wait, current);
+
+	for (i=0; !ret && i<cfi->numchips; i++) {
+		chip = &cfi->chips[i];
+
+	retry:
+		spin_lock_bh(chip->mutex);
+
+		switch(chip->state) {
+		case FL_READY:
+		case FL_STATUS:
+		case FL_CFI_QUERY:
+		case FL_JEDEC_QUERY:
+			chip->oldstate = chip->state;
+			chip->state = FL_SYNCING;
+			/* No need to wake_up() on this state change - 
+			 * as the whole point is that nobody can do anything
+			 * with the chip now anyway.
+			 */
+		case FL_SYNCING:
+			spin_unlock_bh(chip->mutex);
+			break;
+
+		default:
+			/* Not an idle state */
+			add_wait_queue(&chip->wq, &wait);
+			
+			spin_unlock_bh(chip->mutex);
+			schedule();
+		        remove_wait_queue(&chip->wq, &wait);
+			
+			goto retry;
+		}
+	}
+
+	/* Unlock the chips again */
+
+	for (i--; i >=0; i--) {
+		chip = &cfi->chips[i];
+
+		spin_lock_bh(chip->mutex);
+		
+		if (chip->state == FL_SYNCING) {
+			chip->state = chip->oldstate;
+			wake_up(&chip->wq);
+		}
+		spin_unlock_bh(chip->mutex);
+	}
+}
+
+static inline int do_lock_oneblock(struct map_info *map, struct flchip *chip, unsigned long adr)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
+	map_word status, status_OK;
+	unsigned long timeo = jiffies + HZ;
+	DECLARE_WAITQUEUE(wait, current);
+
+	adr += chip->start;
+
+	/* Let's determine this according to the interleave only once */
+	status_OK = CMD(0x80);
+
+	timeo = jiffies + HZ;
+retry:
+	spin_lock_bh(chip->mutex);
+
+	/* Check that the chip's ready to talk to us. */
+	switch (chip->state) {
+	case FL_CFI_QUERY:
+	case FL_JEDEC_QUERY:
+	case FL_READY:
+		map_write(map, CMD(0x70), adr);
+		chip->state = FL_STATUS;
+
+	case FL_STATUS:
+		status = map_read(map, adr);
+		if (map_word_andequal(map, status, status_OK, status_OK)) 
+			break;
+		
+		/* Urgh. Chip not yet ready to talk to us. */
+		if (time_after(jiffies, timeo)) {
+			spin_unlock_bh(chip->mutex);
+			printk(KERN_ERR "waiting for chip to be ready timed out in lock\n");
+			return -EIO;
+		}
+
+		/* Latency issues. Drop the lock, wait a while and retry */
+		spin_unlock_bh(chip->mutex);
+		cfi_udelay(1);
+		goto retry;
+
+	default:
+		/* Stick ourselves on a wait queue to be woken when
+		   someone changes the status */
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		add_wait_queue(&chip->wq, &wait);
+		spin_unlock_bh(chip->mutex);
+		schedule();
+		remove_wait_queue(&chip->wq, &wait);
+		timeo = jiffies + HZ;
+		goto retry;
+	}
+
+	ENABLE_VPP(map);
+	map_write(map, CMD(0x60), adr);
+	map_write(map, CMD(0x01), adr);
+	chip->state = FL_LOCKING;
+	
+	spin_unlock_bh(chip->mutex);
+	msleep(1000);
+	spin_lock_bh(chip->mutex);
+
+	/* FIXME. Use a timer to check this, and return immediately. */
+	/* Once the state machine's known to be working I'll do that */
+
+	timeo = jiffies + (HZ*2);
+	for (;;) {
+
+		status = map_read(map, adr);
+		if (map_word_andequal(map, status, status_OK, status_OK))
+			break;
+		
+		/* OK Still waiting */
+		if (time_after(jiffies, timeo)) {
+			map_write(map, CMD(0x70), adr);
+			chip->state = FL_STATUS;
+			printk(KERN_ERR "waiting for lock to complete timed out. Xstatus = %lx, status = %lx.\n", status.x[0], map_read(map, adr).x[0]);
+			DISABLE_VPP(map);
+			spin_unlock_bh(chip->mutex);
+			return -EIO;
+		}
+		
+		/* Latency issues. Drop the lock, wait a while and retry */
+		spin_unlock_bh(chip->mutex);
+		cfi_udelay(1);
+		spin_lock_bh(chip->mutex);
+	}
+	
+	/* Done and happy. */
+	chip->state = FL_STATUS;
+	DISABLE_VPP(map);
+	wake_up(&chip->wq);
+	spin_unlock_bh(chip->mutex);
+	return 0;
+}
+static int cfi_staa_lock(struct mtd_info *mtd, loff_t ofs, size_t len)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	unsigned long adr;
+	int chipnum, ret = 0;
+#ifdef DEBUG_LOCK_BITS
+	int ofs_factor = cfi->interleave * cfi->device_type;
+#endif
+
+	if (ofs & (mtd->erasesize - 1))
+		return -EINVAL;
+
+	if (len & (mtd->erasesize -1))
+		return -EINVAL;
+
+	if ((len + ofs) > mtd->size)
+		return -EINVAL;
+
+	chipnum = ofs >> cfi->chipshift;
+	adr = ofs - (chipnum << cfi->chipshift);
+
+	while(len) {
+
+#ifdef DEBUG_LOCK_BITS
+		cfi_send_gen_cmd(0x90, 0x55, 0, map, cfi, cfi->device_type, NULL);
+		printk("before lock: block status register is %x\n",cfi_read_query(map, adr+(2*ofs_factor)));
+		cfi_send_gen_cmd(0xff, 0x55, 0, map, cfi, cfi->device_type, NULL);
+#endif
+
+		ret = do_lock_oneblock(map, &cfi->chips[chipnum], adr);
+
+#ifdef DEBUG_LOCK_BITS
+		cfi_send_gen_cmd(0x90, 0x55, 0, map, cfi, cfi->device_type, NULL);
+		printk("after lock: block status register is %x\n",cfi_read_query(map, adr+(2*ofs_factor)));
+		cfi_send_gen_cmd(0xff, 0x55, 0, map, cfi, cfi->device_type, NULL);
+#endif	
+		
+		if (ret)
+			return ret;
+
+		adr += mtd->erasesize;
+		len -= mtd->erasesize;
+
+		if (adr >> cfi->chipshift) {
+			adr = 0;
+			chipnum++;
+			
+			if (chipnum >= cfi->numchips)
+			break;
+		}
+	}
+	return 0;
+}
+static inline int do_unlock_oneblock(struct map_info *map, struct flchip *chip, unsigned long adr)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
+	map_word status, status_OK;
+	unsigned long timeo = jiffies + HZ;
+	DECLARE_WAITQUEUE(wait, current);
+
+	adr += chip->start;
+
+	/* Let's determine this according to the interleave only once */
+	status_OK = CMD(0x80);
+
+	timeo = jiffies + HZ;
+retry:
+	spin_lock_bh(chip->mutex);
+
+	/* Check that the chip's ready to talk to us. */
+	switch (chip->state) {
+	case FL_CFI_QUERY:
+	case FL_JEDEC_QUERY:
+	case FL_READY:
+		map_write(map, CMD(0x70), adr);
+		chip->state = FL_STATUS;
+
+	case FL_STATUS:
+		status = map_read(map, adr);
+		if (map_word_andequal(map, status, status_OK, status_OK))
+			break;
+		
+		/* Urgh. Chip not yet ready to talk to us. */
+		if (time_after(jiffies, timeo)) {
+			spin_unlock_bh(chip->mutex);
+			printk(KERN_ERR "waiting for chip to be ready timed out in unlock\n");
+			return -EIO;
+		}
+
+		/* Latency issues. Drop the lock, wait a while and retry */
+		spin_unlock_bh(chip->mutex);
+		cfi_udelay(1);
+		goto retry;
+
+	default:
+		/* Stick ourselves on a wait queue to be woken when
+		   someone changes the status */
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		add_wait_queue(&chip->wq, &wait);
+		spin_unlock_bh(chip->mutex);
+		schedule();
+		remove_wait_queue(&chip->wq, &wait);
+		timeo = jiffies + HZ;
+		goto retry;
+	}
+
+	ENABLE_VPP(map);
+	map_write(map, CMD(0x60), adr);
+	map_write(map, CMD(0xD0), adr);
+	chip->state = FL_UNLOCKING;
+	
+	spin_unlock_bh(chip->mutex);
+	msleep(1000);
+	spin_lock_bh(chip->mutex);
+
+	/* FIXME. Use a timer to check this, and return immediately. */
+	/* Once the state machine's known to be working I'll do that */
+
+	timeo = jiffies + (HZ*2);
+	for (;;) {
+
+		status = map_read(map, adr);
+		if (map_word_andequal(map, status, status_OK, status_OK))
+			break;
+		
+		/* OK Still waiting */
+		if (time_after(jiffies, timeo)) {
+			map_write(map, CMD(0x70), adr);
+			chip->state = FL_STATUS;
+			printk(KERN_ERR "waiting for unlock to complete timed out. Xstatus = %lx, status = %lx.\n", status.x[0], map_read(map, adr).x[0]);
+			DISABLE_VPP(map);
+			spin_unlock_bh(chip->mutex);
+			return -EIO;
+		}
+		
+		/* Latency issues. Drop the unlock, wait a while and retry */
+		spin_unlock_bh(chip->mutex);
+		cfi_udelay(1);
+		spin_lock_bh(chip->mutex);
+	}
+	
+	/* Done and happy. */
+	chip->state = FL_STATUS;
+	DISABLE_VPP(map);
+	wake_up(&chip->wq);
+	spin_unlock_bh(chip->mutex);
+	return 0;
+}
+static int cfi_staa_unlock(struct mtd_info *mtd, loff_t ofs, size_t len)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	unsigned long adr;
+	int chipnum, ret = 0;
+#ifdef DEBUG_LOCK_BITS
+	int ofs_factor = cfi->interleave * cfi->device_type;
+#endif
+
+	chipnum = ofs >> cfi->chipshift;
+	adr = ofs - (chipnum << cfi->chipshift);
+
+#ifdef DEBUG_LOCK_BITS
+	{
+		unsigned long temp_adr = adr;
+		unsigned long temp_len = len;
+                 
+		cfi_send_gen_cmd(0x90, 0x55, 0, map, cfi, cfi->device_type, NULL);
+                while (temp_len) {
+			printk("before unlock %x: block status register is %x\n",temp_adr,cfi_read_query(map, temp_adr+(2*ofs_factor)));
+			temp_adr += mtd->erasesize;
+			temp_len -= mtd->erasesize;
+		}
+		cfi_send_gen_cmd(0xff, 0x55, 0, map, cfi, cfi->device_type, NULL);
+	}
+#endif
+
+	ret = do_unlock_oneblock(map, &cfi->chips[chipnum], adr);
+
+#ifdef DEBUG_LOCK_BITS
+	cfi_send_gen_cmd(0x90, 0x55, 0, map, cfi, cfi->device_type, NULL);
+	printk("after unlock: block status register is %x\n",cfi_read_query(map, adr+(2*ofs_factor)));
+	cfi_send_gen_cmd(0xff, 0x55, 0, map, cfi, cfi->device_type, NULL);
+#endif
+	
+	return ret;
+}
+
+static int cfi_staa_suspend(struct mtd_info *mtd)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	int i;
+	struct flchip *chip;
+	int ret = 0;
+
+	for (i=0; !ret && i<cfi->numchips; i++) {
+		chip = &cfi->chips[i];
+
+		spin_lock_bh(chip->mutex);
+
+		switch(chip->state) {
+		case FL_READY:
+		case FL_STATUS:
+		case FL_CFI_QUERY:
+		case FL_JEDEC_QUERY:
+			chip->oldstate = chip->state;
+			chip->state = FL_PM_SUSPENDED;
+			/* No need to wake_up() on this state change - 
+			 * as the whole point is that nobody can do anything
+			 * with the chip now anyway.
+			 */
+		case FL_PM_SUSPENDED:
+			break;
+
+		default:
+			ret = -EAGAIN;
+			break;
+		}
+		spin_unlock_bh(chip->mutex);
+	}
+
+	/* Unlock the chips again */
+
+	if (ret) {
+		for (i--; i >=0; i--) {
+			chip = &cfi->chips[i];
+			
+			spin_lock_bh(chip->mutex);
+			
+			if (chip->state == FL_PM_SUSPENDED) {
+				/* No need to force it into a known state here,
+				   because we're returning failure, and it didn't
+				   get power cycled */
+				chip->state = chip->oldstate;
+				wake_up(&chip->wq);
+			}
+			spin_unlock_bh(chip->mutex);
+		}
+	} 
+	
+	return ret;
+}
+
+static void cfi_staa_resume(struct mtd_info *mtd)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	int i;
+	struct flchip *chip;
+
+	for (i=0; i<cfi->numchips; i++) {
+	
+		chip = &cfi->chips[i];
+
+		spin_lock_bh(chip->mutex);
+		
+		/* Go to known state. Chip may have been power cycled */
+		if (chip->state == FL_PM_SUSPENDED) {
+			map_write(map, CMD(0xFF), 0);
+			chip->state = FL_READY;
+			wake_up(&chip->wq);
+		}
+
+		spin_unlock_bh(chip->mutex);
+	}
+}
+
+static void cfi_staa_destroy(struct mtd_info *mtd)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	kfree(cfi->cmdset_priv);
+	kfree(cfi);
+}
+
+static char im_name[]="cfi_cmdset_0020";
+
+static int __init cfi_staa_init(void)
+{
+	inter_module_register(im_name, THIS_MODULE, &cfi_cmdset_0020);
+	return 0;
+}
+
+static void __exit cfi_staa_exit(void)
+{
+	inter_module_unregister(im_name);
+}
+
+module_init(cfi_staa_init);
+module_exit(cfi_staa_exit);
+
+MODULE_LICENSE("GPL");