[MTD] [NOR] Add qry_mode_on()/qry_omde_off() to deal with odd chips

There are some CFI chips which require non standard procedures to get 
into QRY mode. The possible way to support them would be trying 
different modes till QRY will be read. This patch introduce two new 
functions qry_mode_on qry_mode_off. qry_mode_on tries different commands 
in order switch chip into QRY mode.

So if we have one more "odd" chip - we just could add several lines to 
qry_mode_on. Also using these functions remove unnecessary code 
duplicaton in porbe procedure.

Currently there are two "odd" cases
1. Some old intel chips which require 0xFF before 0x98
2. ST M29DW chip which requires 0x98 to be sent at 0x555 (according to
CFI should be 0x55)

This patch is partialy based on the patch from Uwe
(see "[PATCH 2/4] [RFC][MTD] cfi_probe: remove Intel chip workaround"
thread )

Signed-off-by: Alexey Korolev <akorolev@infradead.org>
Signed-off-by: Alexander Belyakov <abelyako@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

1 files changed, 7 insertions, 45 deletions

diff --git a/drivers/mtd/chips/cfi_probe.c b/drivers/mtd/chips/cfi_probe.c
index c418e92e1d9..e706be2ad0c 100644
--- a/drivers/mtd/chips/cfi_probe.c
+++ b/drivers/mtd/chips/cfi_probe.c
@@ -44,17 +44,14 @@ do { \
 
 #define xip_enable(base, map, cfi) \
 do { \
-	cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); \
-	cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL); \
+	qry_mode_off(base, map, cfi); \
 	xip_allowed(base, map); \
 } while (0)
 
 #define xip_disable_qry(base, map, cfi) \
 do { \
 	xip_disable(); \
-	cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); \
-	cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL); \
-	cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL); \
+	qry_mode_on(base, map, cfi); \
 } while (0)
 
 #else
@@ -70,32 +67,6 @@ do { \
    in: interleave,type,mode
    ret: table index, <0 for error
  */
-static int __xipram qry_present(struct map_info *map, __u32 base,
-				struct cfi_private *cfi)
-{
-	int osf = cfi->interleave * cfi->device_type;	// scale factor
-	map_word val[3];
-	map_word qry[3];
-
-	qry[0] = cfi_build_cmd('Q', map, cfi);
-	qry[1] = cfi_build_cmd('R', map, cfi);
-	qry[2] = cfi_build_cmd('Y', map, cfi);
-
-	val[0] = map_read(map, base + osf*0x10);
-	val[1] = map_read(map, base + osf*0x11);
-	val[2] = map_read(map, base + osf*0x12);
-
-	if (!map_word_equal(map, qry[0], val[0]))
-		return 0;
-
-	if (!map_word_equal(map, qry[1], val[1]))
-		return 0;
-
-	if (!map_word_equal(map, qry[2], val[2]))
-		return 0;
-
-	return 1; 	// "QRY" found
-}
 
 static int __xipram cfi_probe_chip(struct map_info *map, __u32 base,
 				   unsigned long *chip_map, struct cfi_private *cfi)
@@ -116,11 +87,7 @@ static int __xipram cfi_probe_chip(struct map_info *map, __u32 base,
 	}
 
 	xip_disable();
-	cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
-	cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
-	cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL);
-
-	if (!qry_present(map,base,cfi)) {
+	if (!qry_mode_on(base, map, cfi)) {
 		xip_enable(base, map, cfi);
 		return 0;
 	}
@@ -144,8 +111,7 @@ static int __xipram cfi_probe_chip(struct map_info *map, __u32 base,
 		if (qry_present(map, start, cfi)) {
 			/* Eep. This chip also had the QRY marker.
 			 * Is it an alias for the new one? */
-			cfi_send_gen_cmd(0xF0, 0, start, map, cfi, cfi->device_type, NULL);
-			cfi_send_gen_cmd(0xFF, 0, start, map, cfi, cfi->device_type, NULL);
+			qry_mode_off(start, map, cfi);
 
 			/* If the QRY marker goes away, it's an alias */
 			if (!qry_present(map, start, cfi)) {
@@ -158,8 +124,7 @@ static int __xipram cfi_probe_chip(struct map_info *map, __u32 base,
 			 * unfortunate. Stick the new chip in read mode
 			 * too and if it's the same, assume it's an alias. */
 			/* FIXME: Use other modes to do a proper check */
-			cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
-			cfi_send_gen_cmd(0xFF, 0, start, map, cfi, cfi->device_type, NULL);
+			qry_mode_off(base, map, cfi);
 
 			if (qry_present(map, base, cfi)) {
 				xip_allowed(base, map);
@@ -176,8 +141,7 @@ static int __xipram cfi_probe_chip(struct map_info *map, __u32 base,
 	cfi->numchips++;
 
 	/* Put it back into Read Mode */
-	cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
-	cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
+	qry_mode_off(base, map, cfi);
 	xip_allowed(base, map);
 
 	printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank\n",
@@ -237,9 +201,7 @@ static int __xipram cfi_chip_setup(struct map_info *map,
 			  cfi_read_query(map, base + 0xf * ofs_factor);
 
 	/* Put it back into Read Mode */
-	cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
-	/* ... even if it's an Intel chip */
-	cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
+	qry_mode_off(base, map, cfi);
 	xip_allowed(base, map);
 
 	/* Do any necessary byteswapping */