[MTD] DOC: Fixup read functions and do a little cleanup

The NAND rework resulted in non ECC based reads. Fix it up and
do a bit of cleanup while at it.

Pointed out by Adrian Bunk.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

1 files changed, 71 insertions, 108 deletions

diff --git a/drivers/mtd/devices/doc2001.c b/drivers/mtd/devices/doc2001.c
index 0cf022a69e6..0e2a9326f71 100644
--- a/drivers/mtd/devices/doc2001.c
+++ b/drivers/mtd/devices/doc2001.c
@@ -37,12 +37,6 @@ static int doc_read(struct mtd_info *mtd, loff_t from, size_t len,
 		    size_t *retlen, u_char *buf);
 static int doc_write(struct mtd_info *mtd, loff_t to, size_t len,
 		     size_t *retlen, const u_char *buf);
-static int doc_read_ecc(struct mtd_info *mtd, loff_t from, size_t len,
-			size_t *retlen, u_char *buf, u_char *eccbuf,
-			struct nand_oobinfo *oobsel);
-static int doc_write_ecc(struct mtd_info *mtd, loff_t to, size_t len,
-			 size_t *retlen, const u_char *buf, u_char *eccbuf,
-			 struct nand_oobinfo *oobsel);
 static int doc_read_oob(struct mtd_info *mtd, loff_t ofs,
 			struct mtd_oob_ops *ops);
 static int doc_write_oob(struct mtd_info *mtd, loff_t ofs,
@@ -397,17 +391,9 @@ EXPORT_SYMBOL_GPL(DoCMil_init);
 static int doc_read (struct mtd_info *mtd, loff_t from, size_t len,
 		     size_t *retlen, u_char *buf)
 {
-	/* Just a special case of doc_read_ecc */
-	return doc_read_ecc(mtd, from, len, retlen, buf, NULL, NULL);
-}
-
-static int doc_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
-			 size_t *retlen, u_char *buf, u_char *eccbuf,
-			 struct nand_oobinfo *oobsel)
-{
 	int i, ret;
 	volatile char dummy;
-	unsigned char syndrome[6];
+	unsigned char syndrome[6], eccbuf[6];
 	struct DiskOnChip *this = mtd->priv;
 	void __iomem *docptr = this->virtadr;
 	struct Nand *mychip = &this->chips[from >> (this->chipshift)];
@@ -437,15 +423,9 @@ static int doc_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
 	DoC_Address(docptr, 3, from, CDSN_CTRL_WP, 0x00);
 	DoC_WaitReady(docptr);
 
-	if (eccbuf) {
-		/* init the ECC engine, see Reed-Solomon EDC/ECC 11.1 .*/
-		WriteDOC (DOC_ECC_RESET, docptr, ECCConf);
-		WriteDOC (DOC_ECC_EN, docptr, ECCConf);
-	} else {
-		/* disable the ECC engine */
-		WriteDOC (DOC_ECC_RESET, docptr, ECCConf);
-		WriteDOC (DOC_ECC_DIS, docptr, ECCConf);
-	}
+	/* init the ECC engine, see Reed-Solomon EDC/ECC 11.1 .*/
+	WriteDOC (DOC_ECC_RESET, docptr, ECCConf);
+	WriteDOC (DOC_ECC_EN, docptr, ECCConf);
 
 	/* Read the data via the internal pipeline through CDSN IO register,
 	   see Pipelined Read Operations 11.3 */
@@ -465,58 +445,56 @@ static int doc_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
 	*retlen = len;
         ret = 0;
 
-	if (eccbuf) {
-		/* Read the ECC data from Spare Data Area,
-		   see Reed-Solomon EDC/ECC 11.1 */
-		dummy = ReadDOC(docptr, ReadPipeInit);
+	/* Read the ECC data from Spare Data Area,
+	   see Reed-Solomon EDC/ECC 11.1 */
+	dummy = ReadDOC(docptr, ReadPipeInit);
 #ifndef USE_MEMCPY
-		for (i = 0; i < 5; i++) {
-			/* N.B. you have to increase the source address in this way or the
-			   ECC logic will not work properly */
-			eccbuf[i] = ReadDOC(docptr, Mil_CDSN_IO + i);
-		}
+	for (i = 0; i < 5; i++) {
+		/* N.B. you have to increase the source address in this way or the
+		   ECC logic will not work properly */
+		eccbuf[i] = ReadDOC(docptr, Mil_CDSN_IO + i);
+	}
 #else
-		memcpy_fromio(eccbuf, docptr + DoC_Mil_CDSN_IO, 5);
+	memcpy_fromio(eccbuf, docptr + DoC_Mil_CDSN_IO, 5);
 #endif
-		eccbuf[5] = ReadDOC(docptr, LastDataRead);
+	eccbuf[5] = ReadDOC(docptr, LastDataRead);
 
-		/* Flush the pipeline */
-		dummy = ReadDOC(docptr, ECCConf);
-		dummy = ReadDOC(docptr, ECCConf);
+	/* Flush the pipeline */
+	dummy = ReadDOC(docptr, ECCConf);
+	dummy = ReadDOC(docptr, ECCConf);
 
-		/* Check the ECC Status */
-		if (ReadDOC(docptr, ECCConf) & 0x80) {
-                        int nb_errors;
-			/* There was an ECC error */
+	/* Check the ECC Status */
+	if (ReadDOC(docptr, ECCConf) & 0x80) {
+		int nb_errors;
+		/* There was an ECC error */
 #ifdef ECC_DEBUG
-			printk("DiskOnChip ECC Error: Read at %lx\n", (long)from);
+		printk("DiskOnChip ECC Error: Read at %lx\n", (long)from);
 #endif
-			/* Read the ECC syndrom through the DiskOnChip ECC logic.
-			   These syndrome will be all ZERO when there is no error */
-			for (i = 0; i < 6; i++) {
-				syndrome[i] = ReadDOC(docptr, ECCSyndrome0 + i);
-			}
-                        nb_errors = doc_decode_ecc(buf, syndrome);
+		/* Read the ECC syndrom through the DiskOnChip ECC logic.
+		   These syndrome will be all ZERO when there is no error */
+		for (i = 0; i < 6; i++) {
+			syndrome[i] = ReadDOC(docptr, ECCSyndrome0 + i);
+		}
+		nb_errors = doc_decode_ecc(buf, syndrome);
 #ifdef ECC_DEBUG
-			printk("ECC Errors corrected: %x\n", nb_errors);
+		printk("ECC Errors corrected: %x\n", nb_errors);
 #endif
-                        if (nb_errors < 0) {
-				/* We return error, but have actually done the read. Not that
-				   this can be told to user-space, via sys_read(), but at least
-				   MTD-aware stuff can know about it by checking *retlen */
-				ret = -EIO;
-                        }
+		if (nb_errors < 0) {
+			/* We return error, but have actually done the read. Not that
+			   this can be told to user-space, via sys_read(), but at least
+			   MTD-aware stuff can know about it by checking *retlen */
+			ret = -EIO;
 		}
+	}
 
 #ifdef PSYCHO_DEBUG
-		printk("ECC DATA at %lx: %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n",
-		       (long)from, eccbuf[0], eccbuf[1], eccbuf[2], eccbuf[3],
-		       eccbuf[4], eccbuf[5]);
+	printk("ECC DATA at %lx: %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n",
+	       (long)from, eccbuf[0], eccbuf[1], eccbuf[2], eccbuf[3],
+	       eccbuf[4], eccbuf[5]);
 #endif
 
-		/* disable the ECC engine */
-		WriteDOC(DOC_ECC_DIS, docptr , ECCConf);
-	}
+	/* disable the ECC engine */
+	WriteDOC(DOC_ECC_DIS, docptr , ECCConf);
 
 	return ret;
 }
@@ -524,15 +502,8 @@ static int doc_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
 static int doc_write (struct mtd_info *mtd, loff_t to, size_t len,
 		      size_t *retlen, const u_char *buf)
 {
-	char eccbuf[6];
-	return doc_write_ecc(mtd, to, len, retlen, buf, eccbuf, NULL);
-}
-
-static int doc_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
-			  size_t *retlen, const u_char *buf, u_char *eccbuf,
-			 struct nand_oobinfo *oobsel)
-{
 	int i,ret = 0;
+	char eccbuf[6];
 	volatile char dummy;
 	struct DiskOnChip *this = mtd->priv;
 	void __iomem *docptr = this->virtadr;
@@ -573,15 +544,9 @@ static int doc_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
 	DoC_Address(docptr, 3, to, 0x00, 0x00);
 	DoC_WaitReady(docptr);
 
-	if (eccbuf) {
-		/* init the ECC engine, see Reed-Solomon EDC/ECC 11.1 .*/
-		WriteDOC (DOC_ECC_RESET, docptr, ECCConf);
-		WriteDOC (DOC_ECC_EN | DOC_ECC_RW, docptr, ECCConf);
-	} else {
-		/* disable the ECC engine */
-		WriteDOC (DOC_ECC_RESET, docptr, ECCConf);
-		WriteDOC (DOC_ECC_DIS, docptr, ECCConf);
-	}
+	/* init the ECC engine, see Reed-Solomon EDC/ECC 11.1 .*/
+	WriteDOC (DOC_ECC_RESET, docptr, ECCConf);
+	WriteDOC (DOC_ECC_EN | DOC_ECC_RW, docptr, ECCConf);
 
 	/* Write the data via the internal pipeline through CDSN IO register,
 	   see Pipelined Write Operations 11.2 */
@@ -596,46 +561,44 @@ static int doc_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
 #endif
 	WriteDOC(0x00, docptr, WritePipeTerm);
 
-	if (eccbuf) {
-		/* Write ECC data to flash, the ECC info is generated by the DiskOnChip ECC logic
-		   see Reed-Solomon EDC/ECC 11.1 */
-		WriteDOC(0, docptr, NOP);
-		WriteDOC(0, docptr, NOP);
-		WriteDOC(0, docptr, NOP);
+	/* Write ECC data to flash, the ECC info is generated by the DiskOnChip ECC logic
+	   see Reed-Solomon EDC/ECC 11.1 */
+	WriteDOC(0, docptr, NOP);
+	WriteDOC(0, docptr, NOP);
+	WriteDOC(0, docptr, NOP);
 
-		/* Read the ECC data through the DiskOnChip ECC logic */
-		for (i = 0; i < 6; i++) {
-			eccbuf[i] = ReadDOC(docptr, ECCSyndrome0 + i);
-		}
+	/* Read the ECC data through the DiskOnChip ECC logic */
+	for (i = 0; i < 6; i++) {
+		eccbuf[i] = ReadDOC(docptr, ECCSyndrome0 + i);
+	}
 
-		/* ignore the ECC engine */
-		WriteDOC(DOC_ECC_DIS, docptr , ECCConf);
+	/* ignore the ECC engine */
+	WriteDOC(DOC_ECC_DIS, docptr , ECCConf);
 
 #ifndef USE_MEMCPY
-		/* Write the ECC data to flash */
-		for (i = 0; i < 6; i++) {
-			/* N.B. you have to increase the source address in this way or the
-			   ECC logic will not work properly */
-			WriteDOC(eccbuf[i], docptr, Mil_CDSN_IO + i);
-		}
+	/* Write the ECC data to flash */
+	for (i = 0; i < 6; i++) {
+		/* N.B. you have to increase the source address in this way or the
+		   ECC logic will not work properly */
+		WriteDOC(eccbuf[i], docptr, Mil_CDSN_IO + i);
+	}
 #else
-		memcpy_toio(docptr + DoC_Mil_CDSN_IO, eccbuf, 6);
+	memcpy_toio(docptr + DoC_Mil_CDSN_IO, eccbuf, 6);
 #endif
 
-		/* write the block status BLOCK_USED (0x5555) at the end of ECC data
-		   FIXME: this is only a hack for programming the IPL area for LinuxBIOS
-		   and should be replace with proper codes in user space utilities */
-		WriteDOC(0x55, docptr, Mil_CDSN_IO);
-		WriteDOC(0x55, docptr, Mil_CDSN_IO + 1);
+	/* write the block status BLOCK_USED (0x5555) at the end of ECC data
+	   FIXME: this is only a hack for programming the IPL area for LinuxBIOS
+	   and should be replace with proper codes in user space utilities */
+	WriteDOC(0x55, docptr, Mil_CDSN_IO);
+	WriteDOC(0x55, docptr, Mil_CDSN_IO + 1);
 
-		WriteDOC(0x00, docptr, WritePipeTerm);
+	WriteDOC(0x00, docptr, WritePipeTerm);
 
 #ifdef PSYCHO_DEBUG
-		printk("OOB data at %lx is %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n",
-		       (long) to, eccbuf[0], eccbuf[1], eccbuf[2], eccbuf[3],
-		       eccbuf[4], eccbuf[5]);
+	printk("OOB data at %lx is %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n",
+	       (long) to, eccbuf[0], eccbuf[1], eccbuf[2], eccbuf[3],
+	       eccbuf[4], eccbuf[5]);
 #endif
-	}
 
 	/* Commit the Page Program command and wait for ready
 	   see Software Requirement 11.4 item 1.*/