summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/maps/Kconfig
diff options
context:
space:
mode:
authorRalf Baechle <ralf@linux-mips.org>2006-12-11 16:25:30 +0000
committerDavid Woodhouse <dwmw2@infradead.org>2006-12-11 16:30:26 +0000
commit0bf3a9d82adc62fb05e3f108ddd46eb088960f26 (patch)
tree8ed32ade6cdf79837fa882888ba059b92ef07988 /drivers/mtd/maps/Kconfig
parent66a1e421b98edaa62c7d95cc53cb381efa3fb9bf (diff)
[MTD] Nuke IVR leftovers
Support for the ITE8172 based boards was deleted a while ago so this is dead code. The Kconfig dependency on MIPS was wrong anyway, MIPS is a processor architecture and nothing else; guesses on systems architecture are likely to be wrong ... Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Diffstat (limited to 'drivers/mtd/maps/Kconfig')
-rw-r--r--drivers/mtd/maps/Kconfig44
1 files changed, 0 insertions, 44 deletions
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 7aac68a62f8..3a33b98eb93 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -382,50 +382,6 @@ config MTD_TQM834x
TQ Components TQM834x boards. If you have one of these boards
and would like to use the flash chips on it, say 'Y'.
-config MTD_CSTM_MIPS_IXX
- tristate "Flash chip mapping on ITE QED-4N-S01B, Globespan IVR or custom board"
- depends on MIPS && MTD_CFI && MTD_JEDECPROBE && MTD_PARTITIONS
- help
- This provides a mapping driver for the Integrated Technology
- Express, Inc (ITE) QED-4N-S01B eval board and the Globespan IVR
- Reference Board. It provides the necessary addressing, length,
- buswidth, vpp code and addition setup of the flash device for
- these boards. In addition, this mapping driver can be used for
- other boards via setting of the CONFIG_MTD_CSTM_MIPS_IXX_START/
- LEN/BUSWIDTH parameters. This mapping will provide one mtd device
- using one partition. The start address can be offset from the
- beginning of flash and the len can be less than the total flash
- device size to allow a window into the flash. Both CFI and JEDEC
- probes are called.
-
-config MTD_CSTM_MIPS_IXX_START
- hex "Physical start address of flash mapping"
- depends on MTD_CSTM_MIPS_IXX
- default "0x8000000"
- help
- This is the physical memory location that the MTD driver will
- use for the flash chips on your particular target board.
- Refer to the memory map which should hopefully be in the
- documentation for your board.
-
-config MTD_CSTM_MIPS_IXX_LEN
- hex "Physical length of flash mapping"
- depends on MTD_CSTM_MIPS_IXX
- default "0x4000000"
- help
- This is the total length that the MTD driver will use for the
- flash chips on your particular board. Refer to the memory
- map which should hopefully be in the documentation for your
- board.
-
-config MTD_CSTM_MIPS_IXX_BUSWIDTH
- int "Bus width in octets"
- depends on MTD_CSTM_MIPS_IXX
- default "2"
- help
- This is the total bus width of the mapping of the flash chips
- on your particular board.
-
config MTD_OCELOT
tristate "Momenco Ocelot boot flash device"
depends on MIPS && MOMENCO_OCELOT