diff options
| author | Thomas Gleixner <tglx@cruncher.tec.linutronix.de> | 2006-05-23 23:25:53 +0200 |
|---|---|---|
| committer | Thomas Gleixner <tglx@cruncher.tec.linutronix.de> | 2006-05-23 23:25:53 +0200 |
| commit | 7abd3ef9875eb2afcdcd4f450680298a2983a55e (patch) | |
| tree | 64c19d2e5ecca182938acfcb8a172efb7d907d85 /drivers/mtd/nand/au1550nd.c | |
| parent | 3821720d51b5f304d2c33021a82c8da70f6d6ac9 (diff) | |
[MTD] Refactor NAND hwcontrol to cmd_ctrl
The hwcontrol function enforced a step by step state machine
for any kind of hardware chip access. Let the hardware driver
know which control bits are set and inform it about a change
of the control lines. Let the hardware driver write out the
command and address bytes directly. This gives a peformance
advantage for address bus controlled chips and simplifies the
quirks in the hardware drivers.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Diffstat (limited to 'drivers/mtd/nand/au1550nd.c')
| -rw-r--r-- | drivers/mtd/nand/au1550nd.c | 25 |
1 files changed, 18 insertions, 7 deletions
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c index 29dde7dcafa..275453ea7a7 100644 --- a/drivers/mtd/nand/au1550nd.c +++ b/drivers/mtd/nand/au1550nd.c @@ -269,6 +269,18 @@ static int au_verify_buf16(struct mtd_info *mtd, const u_char *buf, int len) return 0; } +/* Select the chip by setting nCE to low */ +#define NAND_CTL_SETNCE 1 +/* Deselect the chip by setting nCE to high */ +#define NAND_CTL_CLRNCE 2 +/* Select the command latch by setting CLE to high */ +#define NAND_CTL_SETCLE 3 +/* Deselect the command latch by setting CLE to low */ +#define NAND_CTL_CLRCLE 4 +/* Select the address latch by setting ALE to high */ +#define NAND_CTL_SETALE 5 +/* Deselect the address latch by setting ALE to low */ +#define NAND_CTL_CLRALE 6 static void au1550_hwcontrol(struct mtd_info *mtd, int cmd) { @@ -349,7 +361,7 @@ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, i ulong flags; /* Begin command latch cycle */ - this->hwcontrol(mtd, NAND_CTL_SETCLE); + au1550_hwcontrol(mtd, NAND_CTL_SETCLE); /* * Write out the command to the device. */ @@ -372,10 +384,10 @@ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, i this->write_byte(mtd, command); /* Set ALE and clear CLE to start address cycle */ - this->hwcontrol(mtd, NAND_CTL_CLRCLE); + au1550_hwcontrol(mtd, NAND_CTL_CLRCLE); if (column != -1 || page_addr != -1) { - this->hwcontrol(mtd, NAND_CTL_SETALE); + au1550_hwcontrol(mtd, NAND_CTL_SETALE); /* Serially input address */ if (column != -1) { @@ -400,7 +412,7 @@ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, i */ ce_override = 1; local_irq_save(flags); - this->hwcontrol(mtd, NAND_CTL_SETNCE); + au1550_hwcontrol(mtd, NAND_CTL_SETNCE); } this->write_byte(mtd, (u8)(page_addr >> 8)); @@ -410,7 +422,7 @@ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, i this->write_byte(mtd, (u8)((page_addr >> 16) & 0x0f)); } /* Latch in address */ - this->hwcontrol(mtd, NAND_CTL_CLRALE); + au1550_hwcontrol(mtd, NAND_CTL_CLRALE); } /* @@ -443,7 +455,7 @@ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, i udelay(1); /* Release -CE and re-enable interrupts. */ - this->hwcontrol(mtd, NAND_CTL_CLRNCE); + au1550_hwcontrol(mtd, NAND_CTL_CLRNCE); local_irq_restore(flags); return; } @@ -571,7 +583,6 @@ static int __init au1xxx_nand_init(void) nand_width = au_readl(MEM_STCFG3) & (1 << 22); /* Set address of hardware control function */ - this->hwcontrol = au1550_hwcontrol; this->dev_ready = au1550_device_ready; this->select_chip = au1550_select_chip; this->cmdfunc = au1550_command; |