Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 420 insertions, 0 deletions

diff --git a/drivers/mtd/nand/ppchameleonevb.c b/drivers/mtd/nand/ppchameleonevb.c
new file mode 100644
index 00000000000..e510a83d7bd
--- /dev/null
+++ b/drivers/mtd/nand/ppchameleonevb.c
@@ -0,0 +1,420 @@
+/*
+ *  drivers/mtd/nand/ppchameleonevb.c
+ *
+ *  Copyright (C) 2003 DAVE Srl (info@wawnet.biz)
+ *
+ *  Derived from drivers/mtd/nand/edb7312.c
+ *
+ *
+ * $Id: ppchameleonevb.c,v 1.6 2004/11/05 16:07:16 kalev Exp $
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Overview:
+ *   This is a device driver for the NAND flash devices found on the
+ *   PPChameleon/PPChameleonEVB system.
+ *   PPChameleon options (autodetected):
+ *   - BA model: no NAND
+ *   - ME model: 32MB (Samsung K9F5608U0B)
+ *   - HI model: 128MB (Samsung K9F1G08UOM)
+ *   PPChameleonEVB options:
+ *   - 32MB (Samsung K9F5608U0B)
+ */
+
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <asm/io.h>
+#include <platforms/PPChameleonEVB.h>
+
+#undef USE_READY_BUSY_PIN
+#define USE_READY_BUSY_PIN
+/* see datasheets (tR) */
+#define NAND_BIG_DELAY_US		25
+#define NAND_SMALL_DELAY_US		10
+
+/* handy sizes */
+#define SZ_4M                           0x00400000
+#define NAND_SMALL_SIZE                 0x02000000
+#define NAND_MTD_NAME		"ppchameleon-nand"
+#define NAND_EVB_MTD_NAME	"ppchameleonevb-nand"
+
+/* GPIO pins used to drive NAND chip mounted on processor module */
+#define NAND_nCE_GPIO_PIN 		(0x80000000 >> 1)
+#define NAND_CLE_GPIO_PIN 		(0x80000000 >> 2)
+#define NAND_ALE_GPIO_PIN 		(0x80000000 >> 3)
+#define NAND_RB_GPIO_PIN 		(0x80000000 >> 4)
+/* GPIO pins used to drive NAND chip mounted on EVB */
+#define NAND_EVB_nCE_GPIO_PIN 	(0x80000000 >> 14)
+#define NAND_EVB_CLE_GPIO_PIN 	(0x80000000 >> 15)
+#define NAND_EVB_ALE_GPIO_PIN 	(0x80000000 >> 16)
+#define NAND_EVB_RB_GPIO_PIN 	(0x80000000 >> 31)
+
+/*
+ * MTD structure for PPChameleonEVB board
+ */
+static struct mtd_info *ppchameleon_mtd 	= NULL;
+static struct mtd_info *ppchameleonevb_mtd = NULL;
+
+/*
+ * Module stuff
+ */
+static unsigned long ppchameleon_fio_pbase 	= CFG_NAND0_PADDR;
+static unsigned long ppchameleonevb_fio_pbase = CFG_NAND1_PADDR;
+
+#ifdef MODULE
+module_param(ppchameleon_fio_pbase, ulong, 0);
+module_param(ppchameleonevb_fio_pbase, ulong, 0);
+#else
+__setup("ppchameleon_fio_pbase=",ppchameleon_fio_pbase);
+__setup("ppchameleonevb_fio_pbase=",ppchameleonevb_fio_pbase);
+#endif
+
+#ifdef CONFIG_MTD_PARTITIONS
+/*
+ * Define static partitions for flash devices
+ */
+static struct mtd_partition partition_info_hi[] = {
+	{ name: "PPChameleon HI Nand Flash",
+		  offset: 0,
+		  size: 128*1024*1024 }
+};
+
+static struct mtd_partition partition_info_me[] = {
+	{ name: "PPChameleon ME Nand Flash",
+		  offset: 0,
+		  size: 32*1024*1024 }
+};
+
+static struct mtd_partition partition_info_evb[] = {
+	{ name: "PPChameleonEVB Nand Flash",
+		  offset: 0,
+		  size: 32*1024*1024 }
+};
+
+#define NUM_PARTITIONS 1
+
+extern int parse_cmdline_partitions(struct mtd_info *master,
+				    struct mtd_partition **pparts,
+				    const char *mtd_id);
+#endif
+
+
+/*
+ *	hardware specific access to control-lines
+ */
+static void ppchameleon_hwcontrol(struct mtd_info *mtdinfo, int cmd)
+{
+	switch(cmd) {
+
+	case NAND_CTL_SETCLE:
+        	MACRO_NAND_CTL_SETCLE((unsigned long)CFG_NAND0_PADDR);
+		break;
+	case NAND_CTL_CLRCLE:
+        	MACRO_NAND_CTL_CLRCLE((unsigned long)CFG_NAND0_PADDR);
+		break;
+	case NAND_CTL_SETALE:
+        	MACRO_NAND_CTL_SETALE((unsigned long)CFG_NAND0_PADDR);
+		break;
+	case NAND_CTL_CLRALE:
+        	MACRO_NAND_CTL_CLRALE((unsigned long)CFG_NAND0_PADDR);
+		break;
+	case NAND_CTL_SETNCE:
+			MACRO_NAND_ENABLE_CE((unsigned long)CFG_NAND0_PADDR);
+		break;
+	case NAND_CTL_CLRNCE:
+			MACRO_NAND_DISABLE_CE((unsigned long)CFG_NAND0_PADDR);
+		break;
+	}
+}
+
+static void ppchameleonevb_hwcontrol(struct mtd_info *mtdinfo, int cmd)
+{
+	switch(cmd) {
+
+	case NAND_CTL_SETCLE:
+        	MACRO_NAND_CTL_SETCLE((unsigned long)CFG_NAND1_PADDR);
+		break;
+	case NAND_CTL_CLRCLE:
+        	MACRO_NAND_CTL_CLRCLE((unsigned long)CFG_NAND1_PADDR);
+		break;
+	case NAND_CTL_SETALE:
+        	MACRO_NAND_CTL_SETALE((unsigned long)CFG_NAND1_PADDR);
+		break;
+	case NAND_CTL_CLRALE:
+        	MACRO_NAND_CTL_CLRALE((unsigned long)CFG_NAND1_PADDR);
+		break;
+	case NAND_CTL_SETNCE:
+        	MACRO_NAND_ENABLE_CE((unsigned long)CFG_NAND1_PADDR);
+		break;
+	case NAND_CTL_CLRNCE:
+        	MACRO_NAND_DISABLE_CE((unsigned long)CFG_NAND1_PADDR);
+		break;
+	}
+}
+
+#ifdef USE_READY_BUSY_PIN
+/*
+ *	read device ready pin
+ */
+static int ppchameleon_device_ready(struct mtd_info *minfo)
+{
+	if (in_be32((volatile unsigned*)GPIO0_IR) & NAND_RB_GPIO_PIN)
+		return 1;
+	return 0;
+}
+
+static int ppchameleonevb_device_ready(struct mtd_info *minfo)
+{
+	if (in_be32((volatile unsigned*)GPIO0_IR) & NAND_EVB_RB_GPIO_PIN)
+	return 1;
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_MTD_PARTITIONS
+const char *part_probes[] = { "cmdlinepart", NULL };
+const char *part_probes_evb[] = { "cmdlinepart", NULL };
+#endif
+
+/*
+ * Main initialization routine
+ */
+static int __init ppchameleonevb_init (void)
+{
+	struct nand_chip *this;
+	const char *part_type = 0;
+	int mtd_parts_nb = 0;
+	struct mtd_partition *mtd_parts = 0;
+	void __iomem *ppchameleon_fio_base;
+	void __iomem *ppchameleonevb_fio_base;
+
+
+	/*********************************
+	* Processor module NAND (if any) *
+	*********************************/
+	/* Allocate memory for MTD device structure and private data */
+	ppchameleon_mtd = kmalloc(sizeof(struct mtd_info) +
+						      sizeof(struct nand_chip), GFP_KERNEL);
+	if (!ppchameleon_mtd) {
+		printk("Unable to allocate PPChameleon NAND MTD device structure.\n");
+		return -ENOMEM;
+	}
+
+	/* map physical address */
+	ppchameleon_fio_base = ioremap(ppchameleon_fio_pbase, SZ_4M);
+	if(!ppchameleon_fio_base) {
+		printk("ioremap PPChameleon NAND flash failed\n");
+		kfree(ppchameleon_mtd);
+		return -EIO;
+	}
+
+	/* Get pointer to private data */
+	this = (struct nand_chip *) (&ppchameleon_mtd[1]);
+
+	/* Initialize structures */
+	memset((char *) ppchameleon_mtd, 0, sizeof(struct mtd_info));
+	memset((char *) this, 0, sizeof(struct nand_chip));
+
+	/* Link the private data with the MTD structure */
+	ppchameleon_mtd->priv = this;
+
+        /* Initialize GPIOs */
+	/* Pin mapping for NAND chip */
+	/*
+		CE	GPIO_01
+		CLE	GPIO_02
+		ALE	GPIO_03
+		R/B	GPIO_04
+	*/
+	/* output select */
+	out_be32((volatile unsigned*)GPIO0_OSRH, in_be32((volatile unsigned*)GPIO0_OSRH) & 0xC0FFFFFF);
+	/* three-state select */
+	out_be32((volatile unsigned*)GPIO0_TSRH, in_be32((volatile unsigned*)GPIO0_TSRH) & 0xC0FFFFFF);
+	/* enable output driver */
+	out_be32((volatile unsigned*)GPIO0_TCR, in_be32((volatile unsigned*)GPIO0_TCR) | NAND_nCE_GPIO_PIN | NAND_CLE_GPIO_PIN | NAND_ALE_GPIO_PIN);
+#ifdef USE_READY_BUSY_PIN
+	/* three-state select */
+	out_be32((volatile unsigned*)GPIO0_TSRH, in_be32((volatile unsigned*)GPIO0_TSRH) & 0xFF3FFFFF);
+	/* high-impedecence */
+	out_be32((volatile unsigned*)GPIO0_TCR, in_be32((volatile unsigned*)GPIO0_TCR) & (~NAND_RB_GPIO_PIN));
+	/* input select */
+	out_be32((volatile unsigned*)GPIO0_ISR1H, (in_be32((volatile unsigned*)GPIO0_ISR1H) & 0xFF3FFFFF) | 0x00400000);
+#endif
+
+	/* insert callbacks */
+	this->IO_ADDR_R = ppchameleon_fio_base;
+	this->IO_ADDR_W = ppchameleon_fio_base;
+	this->hwcontrol = ppchameleon_hwcontrol;
+#ifdef USE_READY_BUSY_PIN
+	this->dev_ready = ppchameleon_device_ready;
+#endif
+	this->chip_delay = NAND_BIG_DELAY_US;
+	/* ECC mode */
+	this->eccmode = NAND_ECC_SOFT;
+
+	/* Scan to find existence of the device (it could not be mounted) */
+	if (nand_scan (ppchameleon_mtd, 1)) {
+		iounmap((void *)ppchameleon_fio_base);
+		kfree (ppchameleon_mtd);
+		goto nand_evb_init;
+	}
+
+#ifndef USE_READY_BUSY_PIN
+	/* Adjust delay if necessary */
+	if (ppchameleon_mtd->size == NAND_SMALL_SIZE)
+		this->chip_delay = NAND_SMALL_DELAY_US;
+#endif
+
+#ifdef CONFIG_MTD_PARTITIONS
+	ppchameleon_mtd->name = "ppchameleon-nand";
+	mtd_parts_nb = parse_mtd_partitions(ppchameleon_mtd, part_probes, &mtd_parts, 0);
+	if (mtd_parts_nb > 0)
+	  part_type = "command line";
+	else
+	  mtd_parts_nb = 0;
+#endif
+	if (mtd_parts_nb == 0)
+	{
+		if (ppchameleon_mtd->size == NAND_SMALL_SIZE)
+			mtd_parts = partition_info_me;
+		else
+			mtd_parts = partition_info_hi;
+		mtd_parts_nb = NUM_PARTITIONS;
+		part_type = "static";
+	}
+
+	/* Register the partitions */
+	printk(KERN_NOTICE "Using %s partition definition\n", part_type);
+	add_mtd_partitions(ppchameleon_mtd, mtd_parts, mtd_parts_nb);
+
+nand_evb_init:
+	/****************************
+	* EVB NAND (always present) *
+	****************************/
+	/* Allocate memory for MTD device structure and private data */
+	ppchameleonevb_mtd = kmalloc(sizeof(struct mtd_info) +
+							 sizeof(struct nand_chip), GFP_KERNEL);
+	if (!ppchameleonevb_mtd) {
+		printk("Unable to allocate PPChameleonEVB NAND MTD device structure.\n");
+		return -ENOMEM;
+	}
+
+	/* map physical address */
+	ppchameleonevb_fio_base = ioremap(ppchameleonevb_fio_pbase, SZ_4M);
+	if(!ppchameleonevb_fio_base) {
+		printk("ioremap PPChameleonEVB NAND flash failed\n");
+		kfree(ppchameleonevb_mtd);
+		return -EIO;
+	}
+
+	/* Get pointer to private data */
+	this = (struct nand_chip *) (&ppchameleonevb_mtd[1]);
+
+	/* Initialize structures */
+	memset((char *) ppchameleonevb_mtd, 0, sizeof(struct mtd_info));
+	memset((char *) this, 0, sizeof(struct nand_chip));
+
+	/* Link the private data with the MTD structure */
+	ppchameleonevb_mtd->priv = this;
+
+        /* Initialize GPIOs */
+	/* Pin mapping for NAND chip */
+	/*
+		CE	GPIO_14
+		CLE	GPIO_15
+		ALE	GPIO_16
+		R/B	GPIO_31
+	*/
+	/* output select */
+	out_be32((volatile unsigned*)GPIO0_OSRH, in_be32((volatile unsigned*)GPIO0_OSRH) & 0xFFFFFFF0);
+	out_be32((volatile unsigned*)GPIO0_OSRL, in_be32((volatile unsigned*)GPIO0_OSRL) & 0x3FFFFFFF);
+	/* three-state select */
+	out_be32((volatile unsigned*)GPIO0_TSRH, in_be32((volatile unsigned*)GPIO0_TSRH) & 0xFFFFFFF0);
+	out_be32((volatile unsigned*)GPIO0_TSRL, in_be32((volatile unsigned*)GPIO0_TSRL) & 0x3FFFFFFF);
+	/* enable output driver */
+	out_be32((volatile unsigned*)GPIO0_TCR, in_be32((volatile unsigned*)GPIO0_TCR) | NAND_EVB_nCE_GPIO_PIN | 
+		 NAND_EVB_CLE_GPIO_PIN | NAND_EVB_ALE_GPIO_PIN);
+#ifdef USE_READY_BUSY_PIN
+	/* three-state select */
+	out_be32((volatile unsigned*)GPIO0_TSRL, in_be32((volatile unsigned*)GPIO0_TSRL) & 0xFFFFFFFC);
+	/* high-impedecence */
+	out_be32((volatile unsigned*)GPIO0_TCR, in_be32((volatile unsigned*)GPIO0_TCR) & (~NAND_EVB_RB_GPIO_PIN));
+	/* input select */
+	out_be32((volatile unsigned*)GPIO0_ISR1L, (in_be32((volatile unsigned*)GPIO0_ISR1L) & 0xFFFFFFFC) | 0x00000001);
+#endif
+
+	/* insert callbacks */
+	this->IO_ADDR_R = ppchameleonevb_fio_base;
+	this->IO_ADDR_W = ppchameleonevb_fio_base;
+	this->hwcontrol = ppchameleonevb_hwcontrol;
+#ifdef USE_READY_BUSY_PIN
+	this->dev_ready = ppchameleonevb_device_ready;
+#endif
+	this->chip_delay = NAND_SMALL_DELAY_US;
+
+	/* ECC mode */
+	this->eccmode = NAND_ECC_SOFT;
+
+	/* Scan to find existence of the device */
+	if (nand_scan (ppchameleonevb_mtd, 1)) {
+		iounmap((void *)ppchameleonevb_fio_base);
+		kfree (ppchameleonevb_mtd);
+		return -ENXIO;
+	}
+
+#ifdef CONFIG_MTD_PARTITIONS
+	ppchameleonevb_mtd->name = NAND_EVB_MTD_NAME;
+	mtd_parts_nb = parse_mtd_partitions(ppchameleonevb_mtd, part_probes_evb, &mtd_parts, 0);
+	if (mtd_parts_nb > 0)
+	  part_type = "command line";
+	else
+	  mtd_parts_nb = 0;
+#endif
+	if (mtd_parts_nb == 0)
+	{
+		mtd_parts = partition_info_evb;
+		mtd_parts_nb = NUM_PARTITIONS;
+		part_type = "static";
+	}
+
+	/* Register the partitions */
+	printk(KERN_NOTICE "Using %s partition definition\n", part_type);
+	add_mtd_partitions(ppchameleonevb_mtd, mtd_parts, mtd_parts_nb);
+
+	/* Return happy */
+	return 0;
+}
+module_init(ppchameleonevb_init);
+
+/*
+ * Clean up routine
+ */
+static void __exit ppchameleonevb_cleanup (void)
+{
+	struct nand_chip *this;
+
+	/* Release resources, unregister device(s) */
+	nand_release (ppchameleon_mtd);
+	nand_release (ppchameleonevb_mtd);
+	
+	/* Release iomaps */
+	this = (struct nand_chip *) &ppchameleon_mtd[1];
+	iounmap((void *) this->IO_ADDR_R;
+	this = (struct nand_chip *) &ppchameleonevb_mtd[1];
+	iounmap((void *) this->IO_ADDR_R;
+
+	/* Free the MTD device structure */
+	kfree (ppchameleon_mtd);
+	kfree (ppchameleonevb_mtd);
+}
+module_exit(ppchameleonevb_cleanup);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("DAVE Srl <support-ppchameleon@dave-tech.it>");
+MODULE_DESCRIPTION("MTD map driver for DAVE Srl PPChameleonEVB board");