Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 260 insertions, 0 deletions

diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c
new file mode 100755
index 00000000000..29572793334
--- /dev/null
+++ b/drivers/mtd/nand/sharpsl.c
@@ -0,0 +1,260 @@
+/*
+ * drivers/mtd/nand/sharpsl.c
+ *
+ *  Copyright (C) 2004 Richard Purdie
+ *
+ *  $Id: sharpsl.c,v 1.3 2005/01/03 14:53:50 rpurdie Exp $
+ *
+ *  Based on Sharp's NAND driver sharp_sl.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/genhd.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+#include <linux/interrupt.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+
+static void __iomem *sharpsl_io_base;
+static int sharpsl_phys_base = 0x0C000000;
+
+/* register offset */
+#define ECCLPLB	 	sharpsl_io_base+0x00	/* line parity 7 - 0 bit */
+#define ECCLPUB	 	sharpsl_io_base+0x04	/* line parity 15 - 8 bit */
+#define ECCCP	   	sharpsl_io_base+0x08	/* column parity 5 - 0 bit */
+#define ECCCNTR	 	sharpsl_io_base+0x0C	/* ECC byte counter */
+#define ECCCLRR	 	sharpsl_io_base+0x10	/* cleare ECC */
+#define FLASHIO	 	sharpsl_io_base+0x14	/* Flash I/O */
+#define FLASHCTL	sharpsl_io_base+0x18	/* Flash Control */
+
+/* Flash control bit */
+#define FLRYBY		(1 << 5)
+#define FLCE1		(1 << 4)
+#define FLWP		(1 << 3)
+#define FLALE		(1 << 2)
+#define FLCLE		(1 << 1)
+#define FLCE0		(1 << 0)
+
+
+/*
+ * MTD structure for SharpSL
+ */
+static struct mtd_info *sharpsl_mtd = NULL;
+
+/*
+ * Define partitions for flash device
+ */
+#define DEFAULT_NUM_PARTITIONS 3
+
+static int nr_partitions;
+static struct mtd_partition sharpsl_nand_default_partition_info[] = {
+	{
+	.name = "System Area",
+	.offset = 0,
+	.size = 7 * 1024 * 1024,
+	},
+	{
+	.name = "Root Filesystem",
+	.offset = 7 * 1024 * 1024,
+	.size = 30 * 1024 * 1024,
+	},
+	{
+	.name = "Home Filesystem",
+	.offset = MTDPART_OFS_APPEND ,
+	.size = MTDPART_SIZ_FULL ,
+	},
+};
+
+/* 
+ *	hardware specific access to control-lines
+ */
+static void
+sharpsl_nand_hwcontrol(struct mtd_info* mtd, int cmd)
+{
+	switch (cmd) {
+	case NAND_CTL_SETCLE: 
+		writeb(readb(FLASHCTL) | FLCLE, FLASHCTL);
+		break;
+	case NAND_CTL_CLRCLE:
+		writeb(readb(FLASHCTL) & ~FLCLE, FLASHCTL);
+		break;
+
+	case NAND_CTL_SETALE:
+		writeb(readb(FLASHCTL) | FLALE, FLASHCTL);
+		break;
+	case NAND_CTL_CLRALE:
+		writeb(readb(FLASHCTL) & ~FLALE, FLASHCTL);
+		break;
+
+	case NAND_CTL_SETNCE: 
+		writeb(readb(FLASHCTL) & ~(FLCE0|FLCE1), FLASHCTL);
+		break;
+	case NAND_CTL_CLRNCE: 
+		writeb(readb(FLASHCTL) | (FLCE0|FLCE1), FLASHCTL);
+		break;
+	}
+}
+
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr sharpsl_bbt = {
+	.options = 0,
+	.offs = 4,
+	.len = 2,
+	.pattern = scan_ff_pattern
+};
+
+static int
+sharpsl_nand_dev_ready(struct mtd_info* mtd)
+{
+	return !((readb(FLASHCTL) & FLRYBY) == 0);
+}
+
+static void
+sharpsl_nand_enable_hwecc(struct mtd_info* mtd, int mode)
+{
+	writeb(0 ,ECCCLRR);
+}
+
+static int
+sharpsl_nand_calculate_ecc(struct mtd_info* mtd, const u_char* dat,
+				u_char* ecc_code)
+{
+	ecc_code[0] = ~readb(ECCLPUB);
+	ecc_code[1] = ~readb(ECCLPLB);
+	ecc_code[2] = (~readb(ECCCP) << 2) | 0x03;
+	return readb(ECCCNTR) != 0;
+}
+
+
+#ifdef CONFIG_MTD_PARTITIONS
+const char *part_probes[] = { "cmdlinepart", NULL };
+#endif
+
+
+/*
+ * Main initialization routine
+ */
+int __init
+sharpsl_nand_init(void)
+{
+	struct nand_chip *this;
+	struct mtd_partition* sharpsl_partition_info;
+	int err = 0;
+
+	/* Allocate memory for MTD device structure and private data */
+	sharpsl_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip),
+				GFP_KERNEL);
+	if (!sharpsl_mtd) {
+		printk ("Unable to allocate SharpSL NAND MTD device structure.\n");
+		return -ENOMEM;
+	}
+	
+	/* map physical adress */
+	sharpsl_io_base = ioremap(sharpsl_phys_base, 0x1000);
+	if(!sharpsl_io_base){
+		printk("ioremap to access Sharp SL NAND chip failed\n");
+		kfree(sharpsl_mtd);
+		return -EIO;
+	}
+	
+	/* Get pointer to private data */
+	this = (struct nand_chip *) (&sharpsl_mtd[1]);
+
+	/* Initialize structures */
+	memset((char *) sharpsl_mtd, 0, sizeof(struct mtd_info));
+	memset((char *) this, 0, sizeof(struct nand_chip));
+
+	/* Link the private data with the MTD structure */
+	sharpsl_mtd->priv = this;
+
+	/*
+	 * PXA initialize
+	 */
+	writeb(readb(FLASHCTL) | FLWP, FLASHCTL);
+
+	/* Set address of NAND IO lines */
+	this->IO_ADDR_R = FLASHIO;
+	this->IO_ADDR_W = FLASHIO;
+	/* Set address of hardware control function */
+	this->hwcontrol = sharpsl_nand_hwcontrol;
+	this->dev_ready = sharpsl_nand_dev_ready;
+	/* 15 us command delay time */
+	this->chip_delay = 15;
+	/* set eccmode using hardware ECC */
+	this->eccmode = NAND_ECC_HW3_256;
+	this->enable_hwecc = sharpsl_nand_enable_hwecc;
+	this->calculate_ecc = sharpsl_nand_calculate_ecc;
+	this->correct_data = nand_correct_data;
+	this->badblock_pattern = &sharpsl_bbt;
+
+	/* Scan to find existence of the device */
+	err=nand_scan(sharpsl_mtd,1);
+	if (err) {
+		iounmap(sharpsl_io_base);
+		kfree(sharpsl_mtd);
+		return err;
+	}
+
+	/* Register the partitions */
+	sharpsl_mtd->name = "sharpsl-nand";
+	nr_partitions = parse_mtd_partitions(sharpsl_mtd, part_probes,
+						&sharpsl_partition_info, 0);
+						 
+	if (nr_partitions <= 0) {
+		nr_partitions = DEFAULT_NUM_PARTITIONS;
+		sharpsl_partition_info = sharpsl_nand_default_partition_info;
+		if (machine_is_poodle()) {
+			sharpsl_partition_info[1].size=22 * 1024 * 1024;
+		} else if (machine_is_corgi() || machine_is_shepherd()) {
+			sharpsl_partition_info[1].size=25 * 1024 * 1024;
+		} else if (machine_is_husky()) {
+			sharpsl_partition_info[1].size=53 * 1024 * 1024;
+		} 		
+	}
+
+	if (machine_is_husky()) {
+		/* Need to use small eraseblock size for backward compatibility */
+		sharpsl_mtd->flags |= MTD_NO_VIRTBLOCKS;
+	}
+
+	add_mtd_partitions(sharpsl_mtd, sharpsl_partition_info, nr_partitions);
+
+	/* Return happy */
+	return 0;
+}
+module_init(sharpsl_nand_init);
+
+/*
+ * Clean up routine
+ */
+#ifdef MODULE
+static void __exit sharpsl_nand_cleanup(void)
+{
+	struct nand_chip *this = (struct nand_chip *) &sharpsl_mtd[1];
+
+	/* Release resources, unregister device */
+	nand_release(sharpsl_mtd);
+
+	iounmap(sharpsl_io_base);
+
+	/* Free the MTD device structure */
+	kfree(sharpsl_mtd);
+}
+module_exit(sharpsl_nand_cleanup);
+#endif
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>");
+MODULE_DESCRIPTION("Device specific logic for NAND flash on Sharp SL-C7xx Series");