summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/ubi/Kconfig.debug
diff options
context:
space:
mode:
authorOndrej Puzman <puzman@gmail.com>2010-12-04 21:17:38 +0100
committerGreg Kroah-Hartman <gregkh@suse.de>2010-12-10 15:22:25 -0800
commite4f05af136016958f52455da3070ca6622439b10 (patch)
tree8514a4cfc1e0ad1e232c0be997991947b9189182 /drivers/mtd/ubi/Kconfig.debug
parent53139e36cdd7bbc5efcbdc5e70fbff66e2da3c09 (diff)
8250: fix uninitialized FIFOs
I have found a bug in 8250.c driver which causes that 16550A uart FIFOs are not turned on during initialization if they are manually configured by setserial. UART is then working only as plain 16450 without FIFOs. On systems with higher interrupt latency this causes buffer overruns and loss of received data when using higher communication speeds. I'm working for a company which produces industrial computers. These devices typically contain high number (8 or more) of traditional 16550A uarts - we use TL16C554A chips, but that is not much relevant. UARTs are connected to the CPU by ISA bus (Celeron based devices) or LPC bus (Atom based devices). In the Linux the UARTs are using standard 8250.c driver and are initialized using setserial command: setserial /dev/ttyS4 uart 16550A port 0x3E0 irq 10 baud_base 115200 This executes the UART initialization through serial8250_startup() function. At the beginning of the function up->capabilities is initialized from uart_config: up->capabilities = uart_config[up->port.type].flags; Please note that neither up->port.fifosize nor up->tx_loadsz is initialized here!! Later in the same function serial8250_clear_fifos() is called and disables FIFOs. The above comment says that they will be reenabled in set_termios (they won't ...) After serial8250_startup() the serial8250_set_termios() is called. In this function the following check fails because up->port.fifosize is zero because it is not initialized correctly. if (up->capabilities & UART_CAP_FIFO && up->port.fifosize > 1) { if (baud < 2400) fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1; else fcr = uart_config[up->port.type].fcr; } fcr variable remains zero and in the end the FCR register is set to zero which results in disabled FIFOs even if the UART type is 16550A. This is also true for other types of UARTs with FIFOs. If the UART is autoconfigured via 'setserial /dev/ttySx autoconfig' then port.fifosize and tx_loadsz are initialized correctly in the autoconfig() function and the UART is working correctly then. I checked the source codes and I can say that this bug is present in 2.6.x series of kernels for a couple of years. Namely I can confirm its presence in 2.6.16.57, 2.6.32.24 and 2.6.36.1 (tested all of them on our hardware). I think it was not noticed before because not many people use manually configured non PNP UARTs on ISA/LPC bus these days. Also the data loss caused by buffer overruns occures only if IRQ latency is higher then time needed to receive one character on given communication speed. For example our hardware looses received characters only if the UARTs are connected throught LPC bus with SERIRQ (serial IRQ transport) and not if they are connected to ISA bus because LPC SERIRQ has higher interrupt latency then parallel ISA interupt lines. Here is the patch to correct the bug created against 2.6.36.1: Signed-off-by: Ondrej Puzman <puzman@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/mtd/ubi/Kconfig.debug')
0 files changed, 0 insertions, 0 deletions