Merge branch 'x86/urgent' into x86/pat

Reason: Change to is_new_memtype_allowed() in x86/urgent

Resolved semantic conflicts in:

	 arch/x86/mm/pat.c
	 arch/x86/mm/ioremap.c

Signed-off-by: H. Peter Anvin <hpa@zytor.com>

11 files changed, 129 insertions, 98 deletions

diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index 286ed594e5a..e1f7d0a78b9 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -657,6 +657,11 @@ static int io_init(struct ubi_device *ubi)
 	if (ubi->mtd->block_isbad && ubi->mtd->block_markbad)
 		ubi->bad_allowed = 1;
 
+	if (ubi->mtd->type == MTD_NORFLASH) {
+		ubi_assert(ubi->mtd->writesize == 1);
+		ubi->nor_flash = 1;
+	}
+
 	ubi->min_io_size = ubi->mtd->writesize;
 	ubi->hdrs_min_io_size = ubi->mtd->writesize >> ubi->mtd->subpage_sft;
 
@@ -996,6 +1001,7 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
 	ubi_msg("number of PEBs reserved for bad PEB handling: %d",
 		ubi->beb_rsvd_pebs);
 	ubi_msg("max/mean erase counter: %d/%d", ubi->max_ec, ubi->mean_ec);
+	ubi_msg("image sequence number: %d", ubi->image_seq);
 
 	/*
 	 * The below lock makes sure we do not race with 'ubi_thread()' which
diff --git a/drivers/mtd/ubi/debug.c b/drivers/mtd/ubi/debug.c
index c0ed60e8ade..54b0186915f 100644
--- a/drivers/mtd/ubi/debug.c
+++ b/drivers/mtd/ubi/debug.c
@@ -44,6 +44,8 @@ void ubi_dbg_dump_ec_hdr(const struct ubi_ec_hdr *ec_hdr)
 	       be32_to_cpu(ec_hdr->vid_hdr_offset));
 	printk(KERN_DEBUG "\tdata_offset    %d\n",
 	       be32_to_cpu(ec_hdr->data_offset));
+	printk(KERN_DEBUG "\timage_seq      %d\n",
+	       be32_to_cpu(ec_hdr->image_seq));
 	printk(KERN_DEBUG "\thdr_crc        %#08x\n",
 	       be32_to_cpu(ec_hdr->hdr_crc));
 	printk(KERN_DEBUG "erase counter header hexdump:\n");
diff --git a/drivers/mtd/ubi/debug.h b/drivers/mtd/ubi/debug.h
index 13777e5beac..a4da7a09b94 100644
--- a/drivers/mtd/ubi/debug.h
+++ b/drivers/mtd/ubi/debug.h
@@ -93,6 +93,12 @@ void ubi_dbg_dump_mkvol_req(const struct ubi_mkvol_req *req);
 #define UBI_IO_DEBUG 0
 #endif
 
+#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
+int ubi_dbg_check_all_ff(struct ubi_device *ubi, int pnum, int offset, int len);
+#else
+#define ubi_dbg_check_all_ff(ubi, pnum, offset, len) 0
+#endif
+
 #ifdef CONFIG_MTD_UBI_DEBUG_DISABLE_BGT
 #define DBG_DISABLE_BGT 1
 #else
@@ -167,6 +173,7 @@ static inline int ubi_dbg_is_erase_failure(void)
 #define ubi_dbg_is_bitflip()       0
 #define ubi_dbg_is_write_failure() 0
 #define ubi_dbg_is_erase_failure() 0
+#define ubi_dbg_check_all_ff(ubi, pnum, offset, len) 0
 
 #endif /* !CONFIG_MTD_UBI_DEBUG */
 #endif /* !__UBI_DEBUG_H__ */
diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index 0f2034c3ed2..e4d9ef0c965 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -1254,6 +1254,7 @@ out_free:
 		if (!ubi->volumes[i])
 			continue;
 		kfree(ubi->volumes[i]->eba_tbl);
+		ubi->volumes[i]->eba_tbl = NULL;
 	}
 	return err;
 }
diff --git a/drivers/mtd/ubi/gluebi.c b/drivers/mtd/ubi/gluebi.c
index 95aaac03f93..b5e478fa266 100644
--- a/drivers/mtd/ubi/gluebi.c
+++ b/drivers/mtd/ubi/gluebi.c
@@ -332,6 +332,7 @@ static int gluebi_create(struct ubi_device_info *di,
 	}
 
 	gluebi->vol_id = vi->vol_id;
+	gluebi->ubi_num = vi->ubi_num;
 	mtd->type = MTD_UBIVOLUME;
 	if (!di->ro_mode)
 		mtd->flags = MTD_WRITEABLE;
diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
index effaff28bab..4cb69925d8d 100644
--- a/drivers/mtd/ubi/io.c
+++ b/drivers/mtd/ubi/io.c
@@ -98,17 +98,12 @@ static int paranoid_check_ec_hdr(const struct ubi_device *ubi, int pnum,
 static int paranoid_check_peb_vid_hdr(const struct ubi_device *ubi, int pnum);
 static int paranoid_check_vid_hdr(const struct ubi_device *ubi, int pnum,
 				  const struct ubi_vid_hdr *vid_hdr);
-static int paranoid_check_all_ff(struct ubi_device *ubi, int pnum, int offset,
-				 int len);
-static int paranoid_check_empty(struct ubi_device *ubi, int pnum);
 #else
 #define paranoid_check_not_bad(ubi, pnum) 0
 #define paranoid_check_peb_ec_hdr(ubi, pnum)  0
 #define paranoid_check_ec_hdr(ubi, pnum, ec_hdr)  0
 #define paranoid_check_peb_vid_hdr(ubi, pnum) 0
 #define paranoid_check_vid_hdr(ubi, pnum, vid_hdr) 0
-#define paranoid_check_all_ff(ubi, pnum, offset, len) 0
-#define paranoid_check_empty(ubi, pnum) 0
 #endif
 
 /**
@@ -244,7 +239,7 @@ int ubi_io_write(struct ubi_device *ubi, const void *buf, int pnum, int offset,
 		return err > 0 ? -EINVAL : err;
 
 	/* The area we are writing to has to contain all 0xFF bytes */
-	err = paranoid_check_all_ff(ubi, pnum, offset, len);
+	err = ubi_dbg_check_all_ff(ubi, pnum, offset, len);
 	if (err)
 		return err > 0 ? -EINVAL : err;
 
@@ -271,8 +266,8 @@ int ubi_io_write(struct ubi_device *ubi, const void *buf, int pnum, int offset,
 	addr = (loff_t)pnum * ubi->peb_size + offset;
 	err = ubi->mtd->write(ubi->mtd, addr, len, &written, buf);
 	if (err) {
-		ubi_err("error %d while writing %d bytes to PEB %d:%d, written"
-			" %zd bytes", err, len, pnum, offset, written);
+		ubi_err("error %d while writing %d bytes to PEB %d:%d, written "
+			"%zd bytes", err, len, pnum, offset, written);
 		ubi_dbg_dump_stack();
 	} else
 		ubi_assert(written == len);
@@ -350,7 +345,7 @@ retry:
 		return -EIO;
 	}
 
-	err = paranoid_check_all_ff(ubi, pnum, 0, ubi->peb_size);
+	err = ubi_dbg_check_all_ff(ubi, pnum, 0, ubi->peb_size);
 	if (err)
 		return err > 0 ? -EINVAL : err;
 
@@ -459,6 +454,54 @@ out:
 }
 
 /**
+ * nor_erase_prepare - prepare a NOR flash PEB for erasure.
+ * @ubi: UBI device description object
+ * @pnum: physical eraseblock number to prepare
+ *
+ * NOR flash, or at least some of them, have peculiar embedded PEB erasure
+ * algorithm: the PEB is first filled with zeroes, then it is erased. And
+ * filling with zeroes starts from the end of the PEB. This was observed with
+ * Spansion S29GL512N NOR flash.
+ *
+ * This means that in case of a power cut we may end up with intact data at the
+ * beginning of the PEB, and all zeroes at the end of PEB. In other words, the
+ * EC and VID headers are OK, but a large chunk of data at the end of PEB is
+ * zeroed. This makes UBI mistakenly treat this PEB as used and associate it
+ * with an LEB, which leads to subsequent failures (e.g., UBIFS fails).
+ *
+ * This function is called before erasing NOR PEBs and it zeroes out EC and VID
+ * magic numbers in order to invalidate them and prevent the failures. Returns
+ * zero in case of success and a negative error code in case of failure.
+ */
+static int nor_erase_prepare(struct ubi_device *ubi, int pnum)
+{
+	int err;
+	size_t written;
+	loff_t addr;
+	uint32_t data = 0;
+
+	addr = (loff_t)pnum * ubi->peb_size;
+	err = ubi->mtd->write(ubi->mtd, addr, 4, &written, (void *)&data);
+	if (err) {
+		ubi_err("error %d while writing 4 bytes to PEB %d:%d, written "
+			"%zd bytes", err, pnum, 0, written);
+		ubi_dbg_dump_stack();
+		return err;
+	}
+
+	addr += ubi->vid_hdr_aloffset;
+	err = ubi->mtd->write(ubi->mtd, addr, 4, &written, (void *)&data);
+	if (err) {
+		ubi_err("error %d while writing 4 bytes to PEB %d:%d, written "
+			"%zd bytes", err, pnum, ubi->vid_hdr_aloffset, written);
+		ubi_dbg_dump_stack();
+		return err;
+	}
+
+	return 0;
+}
+
+/**
  * ubi_io_sync_erase - synchronously erase a physical eraseblock.
  * @ubi: UBI device description object
  * @pnum: physical eraseblock number to erase
@@ -489,6 +532,12 @@ int ubi_io_sync_erase(struct ubi_device *ubi, int pnum, int torture)
 		return -EROFS;
 	}
 
+	if (ubi->nor_flash) {
+		err = nor_erase_prepare(ubi, pnum);
+		if (err)
+			return err;
+	}
+
 	if (torture) {
 		ret = torture_peb(ubi, pnum);
 		if (ret < 0)
@@ -672,11 +721,6 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum,
 		if (read_err != -EBADMSG &&
 		    check_pattern(ec_hdr, 0xFF, UBI_EC_HDR_SIZE)) {
 			/* The physical eraseblock is supposedly empty */
-			err = paranoid_check_all_ff(ubi, pnum, 0,
-						    ubi->peb_size);
-			if (err)
-				return err > 0 ? UBI_IO_BAD_EC_HDR : err;
-
 			if (verbose)
 				ubi_warn("no EC header found at PEB %d, "
 					 "only 0xFF bytes", pnum);
@@ -752,6 +796,7 @@ int ubi_io_write_ec_hdr(struct ubi_device *ubi, int pnum,
 	ec_hdr->version = UBI_VERSION;
 	ec_hdr->vid_hdr_offset = cpu_to_be32(ubi->vid_hdr_offset);
 	ec_hdr->data_offset = cpu_to_be32(ubi->leb_start);
+	ec_hdr->image_seq = cpu_to_be32(ubi->image_seq);
 	crc = crc32(UBI_CRC32_INIT, ec_hdr, UBI_EC_HDR_SIZE_CRC);
 	ec_hdr->hdr_crc = cpu_to_be32(crc);
 
@@ -947,15 +992,6 @@ int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum,
 		if (read_err != -EBADMSG &&
 		    check_pattern(vid_hdr, 0xFF, UBI_VID_HDR_SIZE)) {
 			/* The physical eraseblock is supposedly free */
-
-			/*
-			 * The below is just a paranoid check, it has to be
-			 * compiled out if paranoid checks are disabled.
-			 */
-			err = paranoid_check_empty(ubi, pnum);
-			if (err)
-				return err > 0 ? UBI_IO_BAD_VID_HDR : err;
-
 			if (verbose)
 				ubi_warn("no VID header found at PEB %d, "
 					 "only 0xFF bytes", pnum);
@@ -1229,7 +1265,7 @@ exit:
 }
 
 /**
- * paranoid_check_all_ff - check that a region of flash is empty.
+ * ubi_dbg_check_all_ff - check that a region of flash is empty.
  * @ubi: UBI device description object
  * @pnum: the physical eraseblock number to check
  * @offset: the starting offset within the physical eraseblock to check
@@ -1239,8 +1275,7 @@ exit:
  * @offset of the physical eraseblock @pnum, %1 if not, and a negative error
  * code if an error occurred.
  */
-static int paranoid_check_all_ff(struct ubi_device *ubi, int pnum, int offset,
-				 int len)
+int ubi_dbg_check_all_ff(struct ubi_device *ubi, int pnum, int offset, int len)
 {
 	size_t read;
 	int err;
@@ -1276,74 +1311,4 @@ error:
 	return err;
 }
 
-/**
- * paranoid_check_empty - whether a PEB is empty.
- * @ubi: UBI device description object
- * @pnum: the physical eraseblock number to check
- *
- * This function makes sure PEB @pnum is empty, which means it contains only
- * %0xFF data bytes. Returns zero if the PEB is empty, %1 if not, and a
- * negative error code in case of failure.
- *
- * Empty PEBs have the EC header, and do not have the VID header. The caller of
- * this function should have already made sure the PEB does not have the VID
- * header. However, this function re-checks that, because it is possible that
- * the header and data has already been written to the PEB.
- *
- * Let's consider a possible scenario. Suppose there are 2 tasks - A and B.
- * Task A is in 'wear_leveling_worker()'. It is reading VID header of PEB X to
- * find which LEB it corresponds to. PEB X is currently unmapped, and has no
- * VID header. Task B is trying to write to PEB X.
- *
- * Task A: in 'ubi_io_read_vid_hdr()': reads the VID header from PEB X. The
- *         read data contain all 0xFF bytes;
- * Task B: writes VID header and some data to PEB X;
- * Task A: assumes PEB X is empty, calls 'paranoid_check_empty()'. And if we
- *         do not re-read the VID header, and do not cancel the checking if it
- *         is there, we fail.
- */
-static int paranoid_check_empty(struct ubi_device *ubi, int pnum)
-{
-	int err, offs = ubi->vid_hdr_aloffset, len = ubi->vid_hdr_alsize;
-	size_t read;
-	uint32_t magic;
-	const struct ubi_vid_hdr *vid_hdr;
-
-	mutex_lock(&ubi->dbg_buf_mutex);
-	err = ubi->mtd->read(ubi->mtd, offs, len, &read, ubi->dbg_peb_buf);
-	if (err && err != -EUCLEAN) {
-		ubi_err("error %d while reading %d bytes from PEB %d:%d, "
-			"read %zd bytes", err, len, pnum, offs, read);
-		goto error;
-	}
-
-	vid_hdr = ubi->dbg_peb_buf;
-	magic = be32_to_cpu(vid_hdr->magic);
-	if (magic == UBI_VID_HDR_MAGIC)
-		/* The PEB contains VID header, so it is not empty */
-		goto out;
-
-	err = check_pattern(ubi->dbg_peb_buf, 0xFF, len);
-	if (err == 0) {
-		ubi_err("flash region at PEB %d:%d, length %d does not "
-			"contain all 0xFF bytes", pnum, offs, len);
-		goto fail;
-	}
-
-out:
-	mutex_unlock(&ubi->dbg_buf_mutex);
-	return 0;
-
-fail:
-	ubi_err("paranoid check failed for PEB %d", pnum);
-	ubi_msg("hex dump of the %d-%d region", offs, offs + len);
-	print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1,
-		       ubi->dbg_peb_buf, len, 1);
-	err = 1;
-error:
-	ubi_dbg_dump_stack();
-	mutex_unlock(&ubi->dbg_buf_mutex);
-	return err;
-}
-
 #endif /* CONFIG_MTD_UBI_DEBUG_PARANOID */
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index c3d653ba5ca..b847745394b 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -757,6 +757,8 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si,
 	si->is_empty = 0;
 
 	if (!ec_corr) {
+		int image_seq;
+
 		/* Make sure UBI version is OK */
 		if (ech->version != UBI_VERSION) {
 			ubi_err("this UBI version is %d, image version is %d",
@@ -778,6 +780,29 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si,
 			ubi_dbg_dump_ec_hdr(ech);
 			return -EINVAL;
 		}
+
+		/*
+		 * Make sure that all PEBs have the same image sequence number.
+		 * This allows us to detect situations when users flash UBI
+		 * images incorrectly, so that the flash has the new UBI image
+		 * and leftovers from the old one. This feature was added
+		 * relatively recently, and the sequence number was always
+		 * zero, because old UBI implementations always set it to zero.
+		 * For this reasons, we do not panic if some PEBs have zero
+		 * sequence number, while other PEBs have non-zero sequence
+		 * number.
+		 */
+		image_seq = be32_to_cpu(ech->image_seq);
+		if (!si->image_seq_set) {
+			ubi->image_seq = image_seq;
+			si->image_seq_set = 1;
+		} else if (ubi->image_seq && ubi->image_seq != image_seq) {
+			ubi_err("bad image sequence number %d in PEB %d, "
+				"expected %d", image_seq, pnum, ubi->image_seq);
+			ubi_dbg_dump_ec_hdr(ech);
+			return -EINVAL;
+		}
+
 	}
 
 	/* OK, we've done with the EC header, let's look at the VID header */
diff --git a/drivers/mtd/ubi/scan.h b/drivers/mtd/ubi/scan.h
index 61df208e2f2..1017cf12def 100644
--- a/drivers/mtd/ubi/scan.h
+++ b/drivers/mtd/ubi/scan.h
@@ -102,6 +102,7 @@ struct ubi_scan_volume {
  * @mean_ec: mean erase counter value
  * @ec_sum: a temporary variable used when calculating @mean_ec
  * @ec_count: a temporary variable used when calculating @mean_ec
+ * @image_seq_set: indicates @ubi->image_seq is known
  *
  * This data structure contains the result of scanning and may be used by other
  * UBI sub-systems to build final UBI data structures, further error-recovery
@@ -124,6 +125,7 @@ struct ubi_scan_info {
 	int mean_ec;
 	uint64_t ec_sum;
 	int ec_count;
+	int image_seq_set;
 };
 
 struct ubi_device;
diff --git a/drivers/mtd/ubi/ubi-media.h b/drivers/mtd/ubi/ubi-media.h
index 8419fdccc79..503ea9b2730 100644
--- a/drivers/mtd/ubi/ubi-media.h
+++ b/drivers/mtd/ubi/ubi-media.h
@@ -129,6 +129,7 @@ enum {
  * @ec: the erase counter
  * @vid_hdr_offset: where the VID header starts
  * @data_offset: where the user data start
+ * @image_seq: image sequence number
  * @padding2: reserved for future, zeroes
  * @hdr_crc: erase counter header CRC checksum
  *
@@ -144,6 +145,14 @@ enum {
  * volume identifier header and user data, relative to the beginning of the
  * physical eraseblock. These values have to be the same for all physical
  * eraseblocks.
+ *
+ * The @image_seq field is used to validate a UBI image that has been prepared
+ * for a UBI device. The @image_seq value can be any value, but it must be the
+ * same on all eraseblocks. UBI will ensure that all new erase counter headers
+ * also contain this value, and will check the value when scanning at start-up.
+ * One way to make use of @image_seq is to increase its value by one every time
+ * an image is flashed over an existing image, then, if the flashing does not
+ * complete, UBI will detect the error when scanning.
  */
 struct ubi_ec_hdr {
 	__be32  magic;
@@ -152,7 +161,8 @@ struct ubi_ec_hdr {
 	__be64  ec; /* Warning: the current limit is 31-bit anyway! */
 	__be32  vid_hdr_offset;
 	__be32  data_offset;
-	__u8    padding2[36];
+	__be32  image_seq;
+	__u8    padding2[32];
 	__be32  hdr_crc;
 } __attribute__ ((packed));
 
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index 28acd133c99..6a5fe963378 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -301,6 +301,7 @@ struct ubi_wl_entry;
  *                @vol->readers, @vol->writers, @vol->exclusive,
  *                @vol->ref_count, @vol->mapping and @vol->eba_tbl.
  * @ref_count: count of references on the UBI device
+ * @image_seq: image sequence number recorded on EC headers
  *
  * @rsvd_pebs: count of reserved physical eraseblocks
  * @avail_pebs: count of available physical eraseblocks
@@ -372,6 +373,7 @@ struct ubi_wl_entry;
  * @vid_hdr_shift: contains @vid_hdr_offset - @vid_hdr_aloffset
  * @bad_allowed: whether the MTD device admits of bad physical eraseblocks or
  *               not
+ * @nor_flash: non-zero if working on top of NOR flash
  * @mtd: MTD device descriptor
  *
  * @peb_buf1: a buffer of PEB size used for different purposes
@@ -390,6 +392,7 @@ struct ubi_device {
 	struct ubi_volume *volumes[UBI_MAX_VOLUMES+UBI_INT_VOL_COUNT];
 	spinlock_t volumes_lock;
 	int ref_count;
+	int image_seq;
 
 	int rsvd_pebs;
 	int avail_pebs;
@@ -452,7 +455,8 @@ struct ubi_device {
 	int vid_hdr_offset;
 	int vid_hdr_aloffset;
 	int vid_hdr_shift;
-	int bad_allowed;
+	unsigned int bad_allowed:1;
+	unsigned int nor_flash:1;
 	struct mtd_info *mtd;
 
 	void *peb_buf1;
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 2b247230061..600c7229d5c 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -459,6 +459,14 @@ retry:
 	dbg_wl("PEB %d EC %d", e->pnum, e->ec);
 	prot_queue_add(ubi, e);
 	spin_unlock(&ubi->wl_lock);
+
+	err = ubi_dbg_check_all_ff(ubi, e->pnum, ubi->vid_hdr_aloffset,
+				   ubi->peb_size - ubi->vid_hdr_aloffset);
+	if (err) {
+		ubi_err("new PEB %d does not contain all 0xFF bytes", e->pnum);
+		return err > 0 ? -EINVAL : err;
+	}
+
 	return e->pnum;
 }