omap3 nand: cleanup virtual address usages

This patch removes direct reference of gpmc address from generic nand platform code.
Nand platform code now uses wrapper functions which are implemented in gpmc module.

Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

1 files changed, 53 insertions, 161 deletions

diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index ec8eb3109d0..133d51528f8 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -7,6 +7,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#define CONFIG_MTD_NAND_OMAP_HWECC
 
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
@@ -23,20 +24,8 @@
 #include <plat/gpmc.h>
 #include <plat/nand.h>
 
-#define GPMC_IRQ_STATUS		0x18
-#define GPMC_ECC_CONFIG		0x1F4
-#define GPMC_ECC_CONTROL	0x1F8
-#define GPMC_ECC_SIZE_CONFIG	0x1FC
-#define GPMC_ECC1_RESULT	0x200
-
 #define	DRIVER_NAME	"omap2-nand"
 
-#define	NAND_WP_OFF	0
-#define NAND_WP_BIT	0x00000010
-
-#define	GPMC_BUF_FULL	0x00000001
-#define	GPMC_BUF_EMPTY	0x00000000
-
 #define NAND_Ecc_P1e		(1 << 0)
 #define NAND_Ecc_P2e		(1 << 1)
 #define NAND_Ecc_P4e		(1 << 2)
@@ -139,34 +128,11 @@ struct omap_nand_info {
 
 	int				gpmc_cs;
 	unsigned long			phys_base;
-	void __iomem			*gpmc_cs_baseaddr;
-	void __iomem			*gpmc_baseaddr;
-	void __iomem			*nand_pref_fifo_add;
 	struct completion		comp;
 	int				dma_ch;
 };
 
 /**
- * omap_nand_wp - This function enable or disable the Write Protect feature
- * @mtd: MTD device structure
- * @mode: WP ON/OFF
- */
-static void omap_nand_wp(struct mtd_info *mtd, int mode)
-{
-	struct omap_nand_info *info = container_of(mtd,
-						struct omap_nand_info, mtd);
-
-	unsigned long config = __raw_readl(info->gpmc_baseaddr + GPMC_CONFIG);
-
-	if (mode)
-		config &= ~(NAND_WP_BIT);	/* WP is ON */
-	else
-		config |= (NAND_WP_BIT);	/* WP is OFF */
-
-	__raw_writel(config, (info->gpmc_baseaddr + GPMC_CONFIG));
-}
-
-/**
  * omap_hwcontrol - hardware specific access to control-lines
  * @mtd: MTD device structure
  * @cmd: command to device
@@ -181,31 +147,17 @@ static void omap_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 {
 	struct omap_nand_info *info = container_of(mtd,
 					struct omap_nand_info, mtd);
-	switch (ctrl) {
-	case NAND_CTRL_CHANGE | NAND_CTRL_CLE:
-		info->nand.IO_ADDR_W = info->gpmc_cs_baseaddr +
-						GPMC_CS_NAND_COMMAND;
-		info->nand.IO_ADDR_R = info->gpmc_cs_baseaddr +
-						GPMC_CS_NAND_DATA;
-		break;
-
-	case NAND_CTRL_CHANGE | NAND_CTRL_ALE:
-		info->nand.IO_ADDR_W = info->gpmc_cs_baseaddr +
-						GPMC_CS_NAND_ADDRESS;
-		info->nand.IO_ADDR_R = info->gpmc_cs_baseaddr +
-						GPMC_CS_NAND_DATA;
-		break;
-
-	case NAND_CTRL_CHANGE | NAND_NCE:
-		info->nand.IO_ADDR_W = info->gpmc_cs_baseaddr +
-						GPMC_CS_NAND_DATA;
-		info->nand.IO_ADDR_R = info->gpmc_cs_baseaddr +
-						GPMC_CS_NAND_DATA;
-		break;
-	}
 
-	if (cmd != NAND_CMD_NONE)
-		__raw_writeb(cmd, info->nand.IO_ADDR_W);
+	if (cmd != NAND_CMD_NONE) {
+		if (ctrl & NAND_CLE)
+			gpmc_nand_write(info->gpmc_cs, GPMC_NAND_COMMAND, cmd);
+
+		else if (ctrl & NAND_ALE)
+			gpmc_nand_write(info->gpmc_cs, GPMC_NAND_ADDRESS, cmd);
+
+		else /* NAND_NCE */
+			gpmc_nand_write(info->gpmc_cs, GPMC_NAND_DATA, cmd);
+	}
 }
 
 /**
@@ -232,11 +184,14 @@ static void omap_write_buf8(struct mtd_info *mtd, const u_char *buf, int len)
 	struct omap_nand_info *info = container_of(mtd,
 						struct omap_nand_info, mtd);
 	u_char *p = (u_char *)buf;
+	u32	status = 0;
 
 	while (len--) {
 		iowrite8(*p++, info->nand.IO_ADDR_W);
-		while (GPMC_BUF_EMPTY == (readl(info->gpmc_baseaddr +
-						GPMC_STATUS) & GPMC_BUF_FULL));
+		/* wait until buffer is available for write */
+		do {
+			status = gpmc_read_status(GPMC_STATUS_BUFFER);
+		} while (!status);
 	}
 }
 
@@ -264,16 +219,16 @@ static void omap_write_buf16(struct mtd_info *mtd, const u_char * buf, int len)
 	struct omap_nand_info *info = container_of(mtd,
 						struct omap_nand_info, mtd);
 	u16 *p = (u16 *) buf;
-
+	u32	status = 0;
 	/* FIXME try bursts of writesw() or DMA ... */
 	len >>= 1;
 
 	while (len--) {
 		iowrite16(*p++, info->nand.IO_ADDR_W);
-
-		while (GPMC_BUF_EMPTY == (readl(info->gpmc_baseaddr +
-						GPMC_STATUS) & GPMC_BUF_FULL))
-			;
+		/* wait until buffer is available for write */
+		do {
+			status = gpmc_read_status(GPMC_STATUS_BUFFER);
+		} while (!status);
 	}
 }
 
@@ -287,7 +242,7 @@ static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len)
 {
 	struct omap_nand_info *info = container_of(mtd,
 						struct omap_nand_info, mtd);
-	uint32_t pfpw_status = 0, r_count = 0;
+	uint32_t r_count = 0;
 	int ret = 0;
 	u32 *p = (u32 *)buf;
 
@@ -310,14 +265,14 @@ static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len)
 		else
 			omap_read_buf8(mtd, buf, len);
 	} else {
+		p = (u32 *) buf;
 		do {
-			pfpw_status = gpmc_prefetch_status();
-			r_count = ((pfpw_status >> 24) & 0x7F) >> 2;
-			ioread32_rep(info->nand_pref_fifo_add, p, r_count);
+			r_count = gpmc_read_status(GPMC_PREFETCH_FIFO_CNT);
+			r_count = r_count >> 2;
+			ioread32_rep(info->nand.IO_ADDR_R, p, r_count);
 			p += r_count;
 			len -= r_count << 2;
 		} while (len);
-
 		/* disable and stop the PFPW engine */
 		gpmc_prefetch_reset(info->gpmc_cs);
 	}
@@ -334,13 +289,13 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
 {
 	struct omap_nand_info *info = container_of(mtd,
 						struct omap_nand_info, mtd);
-	uint32_t pfpw_status = 0, w_count = 0;
+	uint32_t pref_count = 0, w_count = 0;
 	int i = 0, ret = 0;
-	u16 *p = (u16 *) buf;
+	u16 *p;
 
 	/* take care of subpage writes */
 	if (len % 2 != 0) {
-		writeb(*buf, info->nand.IO_ADDR_R);
+		writeb(*buf, info->nand.IO_ADDR_W);
 		p = (u16 *)(buf + 1);
 		len--;
 	}
@@ -354,14 +309,17 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
 		else
 			omap_write_buf8(mtd, buf, len);
 	} else {
-		pfpw_status = gpmc_prefetch_status();
-		while (pfpw_status & 0x3FFF) {
-			w_count = ((pfpw_status >> 24) & 0x7F) >> 1;
+		p = (u16 *) buf;
+		while (len) {
+			w_count = gpmc_read_status(GPMC_PREFETCH_FIFO_CNT);
+			w_count = w_count >> 1;
 			for (i = 0; (i < w_count) && len; i++, len -= 2)
-				iowrite16(*p++, info->nand_pref_fifo_add);
-			pfpw_status = gpmc_prefetch_status();
+				iowrite16(*p++, info->nand.IO_ADDR_W);
 		}
-
+		/* wait for data to flushed-out before reset the prefetch */
+		do {
+			pref_count = gpmc_read_status(GPMC_PREFETCH_COUNT);
+		} while (pref_count);
 		/* disable and stop the PFPW engine */
 		gpmc_prefetch_reset(info->gpmc_cs);
 	}
@@ -451,8 +409,9 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
 	/* setup and start DMA using dma_addr */
 	wait_for_completion(&info->comp);
 
-	while (0x3fff & (prefetch_status = gpmc_prefetch_status()))
-		;
+	do {
+		prefetch_status = gpmc_read_status(GPMC_PREFETCH_COUNT);
+	} while (prefetch_status);
 	/* disable and stop the PFPW engine */
 	gpmc_prefetch_reset();
 
@@ -530,29 +489,6 @@ static int omap_verify_buf(struct mtd_info *mtd, const u_char * buf, int len)
 }
 
 #ifdef CONFIG_MTD_NAND_OMAP_HWECC
-/**
- * omap_hwecc_init - Initialize the HW ECC for NAND flash in GPMC controller
- * @mtd: MTD device structure
- */
-static void omap_hwecc_init(struct mtd_info *mtd)
-{
-	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
-							mtd);
-	struct nand_chip *chip = mtd->priv;
-	unsigned long val = 0x0;
-
-	/* Read from ECC Control Register */
-	val = __raw_readl(info->gpmc_baseaddr + GPMC_ECC_CONTROL);
-	/* Clear all ECC | Enable Reg1 */
-	val = ((0x00000001<<8) | 0x00000001);
-	__raw_writel(val, info->gpmc_baseaddr + GPMC_ECC_CONTROL);
-
-	/* Read from ECC Size Config Register */
-	val = __raw_readl(info->gpmc_baseaddr + GPMC_ECC_SIZE_CONFIG);
-	/* ECCSIZE1=512 | Select eccResultsize[0-3] */
-	val = ((((chip->ecc.size >> 1) - 1) << 22) | (0x0000000F));
-	__raw_writel(val, info->gpmc_baseaddr + GPMC_ECC_SIZE_CONFIG);
-}
 
 /**
  * gen_true_ecc - This function will generate true ECC value
@@ -755,19 +691,7 @@ static int omap_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
 {
 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
 							mtd);
-	unsigned long val = 0x0;
-	unsigned long reg;
-
-	/* Start Reading from HW ECC1_Result = 0x200 */
-	reg = (unsigned long)(info->gpmc_baseaddr + GPMC_ECC1_RESULT);
-	val = __raw_readl(reg);
-	*ecc_code++ = val;          /* P128e, ..., P1e */
-	*ecc_code++ = val >> 16;    /* P128o, ..., P1o */
-	/* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */
-	*ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0);
-	reg += 4;
-
-	return 0;
+	return gpmc_calculate_ecc(info->gpmc_cs, dat, ecc_code);
 }
 
 /**
@@ -781,32 +705,10 @@ static void omap_enable_hwecc(struct mtd_info *mtd, int mode)
 							mtd);
 	struct nand_chip *chip = mtd->priv;
 	unsigned int dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0;
-	unsigned long val = __raw_readl(info->gpmc_baseaddr + GPMC_ECC_CONFIG);
-
-	switch (mode) {
-	case NAND_ECC_READ:
-		__raw_writel(0x101, info->gpmc_baseaddr + GPMC_ECC_CONTROL);
-		/* (ECC 16 or 8 bit col) | ( CS  )  | ECC Enable */
-		val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1);
-		break;
-	case NAND_ECC_READSYN:
-		 __raw_writel(0x100, info->gpmc_baseaddr + GPMC_ECC_CONTROL);
-		/* (ECC 16 or 8 bit col) | ( CS  )  | ECC Enable */
-		val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1);
-		break;
-	case NAND_ECC_WRITE:
-		__raw_writel(0x101, info->gpmc_baseaddr + GPMC_ECC_CONTROL);
-		/* (ECC 16 or 8 bit col) | ( CS  )  | ECC Enable */
-		val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1);
-		break;
-	default:
-		DEBUG(MTD_DEBUG_LEVEL0, "Error: Unrecognized Mode[%d]!\n",
-					mode);
-		break;
-	}
 
-	__raw_writel(val, info->gpmc_baseaddr + GPMC_ECC_CONFIG);
+	gpmc_enable_hwecc(info->gpmc_cs, mode, dev_width, info->nand.ecc.size);
 }
+
 #endif
 
 /**
@@ -834,14 +736,10 @@ static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip)
 	else
 		timeo += (HZ * 20) / 1000;
 
-	this->IO_ADDR_W = (void *) info->gpmc_cs_baseaddr +
-						GPMC_CS_NAND_COMMAND;
-	this->IO_ADDR_R = (void *) info->gpmc_cs_baseaddr + GPMC_CS_NAND_DATA;
-
-	__raw_writeb(NAND_CMD_STATUS & 0xFF, this->IO_ADDR_W);
-
+	gpmc_nand_write(info->gpmc_cs,
+			GPMC_NAND_COMMAND, (NAND_CMD_STATUS & 0xFF));
 	while (time_before(jiffies, timeo)) {
-		status = __raw_readb(this->IO_ADDR_R);
+		status = gpmc_nand_read(info->gpmc_cs, GPMC_NAND_DATA);
 		if (status & NAND_STATUS_READY)
 			break;
 		cond_resched();
@@ -855,22 +753,22 @@ static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip)
  */
 static int omap_dev_ready(struct mtd_info *mtd)
 {
+	unsigned int val = 0;
 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
 							mtd);
-	unsigned int val = __raw_readl(info->gpmc_baseaddr + GPMC_IRQ_STATUS);
 
+	val = gpmc_read_status(GPMC_GET_IRQ_STATUS);
 	if ((val & 0x100) == 0x100) {
 		/* Clear IRQ Interrupt */
 		val |= 0x100;
 		val &= ~(0x0);
-		__raw_writel(val, info->gpmc_baseaddr + GPMC_IRQ_STATUS);
+		gpmc_cs_configure(info->gpmc_cs, GPMC_SET_IRQ_STATUS, val);
 	} else {
 		unsigned int cnt = 0;
 		while (cnt++ < 0x1FF) {
 			if  ((val & 0x100) == 0x100)
 				return 0;
-			val = __raw_readl(info->gpmc_baseaddr +
-							GPMC_IRQ_STATUS);
+			val = gpmc_read_status(GPMC_GET_IRQ_STATUS);
 		}
 	}
 
@@ -901,8 +799,6 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
 	info->pdev = pdev;
 
 	info->gpmc_cs		= pdata->cs;
-	info->gpmc_baseaddr	= pdata->gpmc_baseaddr;
-	info->gpmc_cs_baseaddr	= pdata->gpmc_cs_baseaddr;
 	info->phys_base		= pdata->phys_base;
 
 	info->mtd.priv		= &info->nand;
@@ -913,7 +809,7 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
 	info->nand.options	|= NAND_SKIP_BBTSCAN;
 
 	/* NAND write protect off */
-	omap_nand_wp(&info->mtd, NAND_WP_OFF);
+	gpmc_cs_configure(info->gpmc_cs, GPMC_CONFIG_WP, 0);
 
 	if (!request_mem_region(info->phys_base, NAND_IO_SIZE,
 				pdev->dev.driver->name)) {
@@ -948,8 +844,6 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
 	}
 
 	if (use_prefetch) {
-		/* copy the virtual address of nand base for fifo access */
-		info->nand_pref_fifo_add = info->nand.IO_ADDR_R;
 
 		info->nand.read_buf   = omap_read_buf_pref;
 		info->nand.write_buf  = omap_write_buf_pref;
@@ -989,8 +883,6 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
 	info->nand.ecc.correct		= omap_correct_data;
 	info->nand.ecc.mode		= NAND_ECC_HW;
 
-	/* init HW ECC */
-	omap_hwecc_init(&info->mtd);
 #else
 	info->nand.ecc.mode = NAND_ECC_SOFT;
 #endif
@@ -1040,7 +932,7 @@ static int omap_nand_remove(struct platform_device *pdev)
 
 	/* Release NAND device, its internal structures and partitions */
 	nand_release(&info->mtd);
-	iounmap(info->nand_pref_fifo_add);
+	iounmap(info->nand.IO_ADDR_R);
 	kfree(&info->mtd);
 	return 0;
 }