diff options
author | Mike Frysinger <vapier.adi@gmail.com> | 2008-05-19 18:32:24 +0800 |
---|---|---|
committer | David Woodhouse <dwmw2@infradead.org> | 2008-06-04 17:57:23 +0100 |
commit | 2e3c22f57029ce04d55c07b8332ae405005456d9 (patch) | |
tree | 97a4f23dc51ed63750bcd311cb52a51c6b0e5bb5 /drivers/mtd | |
parent | 71a928c0e52cedc43747c64b96a5f74592ab678f (diff) |
[MTD] [MAPS] Blackfin Async Flash Maps
Handle the case where flash memory and ethernet mac/phy are mapped onto
the same async bank
[try #4]
- drop superfluous casts
- drop SSYNC() when reading from the flash and rewrite
bfin_copy_from() to be like bfin_copy_to() so that
we dont have to handle all the aligned/unaligned cases
[try #3] rename bf5xx-flash to bfin-async-flash
- move all kconfig board settings into board resources
- fixup casting style according to lkml feedback
- rewrite driver so that it can handle arbitrary of
instances according to the declared platform resources
[try #2]
Remove useless SSYNC() as Will said
[try #1]
The BF533-STAMP does this for example.
All board-specific configuration goes in your board resources file.
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Acked-By: Jörn Engel <joern@logfs.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Diffstat (limited to 'drivers/mtd')
-rw-r--r-- | drivers/mtd/maps/Kconfig | 11 | ||||
-rw-r--r-- | drivers/mtd/maps/Makefile | 1 | ||||
-rw-r--r-- | drivers/mtd/maps/bfin-async-flash.c | 219 |
3 files changed, 231 insertions, 0 deletions
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index b2c18024561..02c45e1e24e 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -523,6 +523,17 @@ config MTD_PCMCIA_ANONYMOUS If unsure, say N. +config MTD_BFIN_ASYNC + tristate "Blackfin BF533-STAMP Flash Chip Support" + depends on BFIN533_STAMP && MTD_CFI + select MTD_PARTITIONS + default y + help + Map driver which allows for simultaneous utilization of + ethernet and CFI parallel flash. + + If compiled as a module, it will be called bfin-async-flash. + config MTD_UCLINUX tristate "Generic uClinux RAM/ROM filesystem support" depends on MTD_PARTITIONS && !MMU diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile index 5444eaf4026..d6cfce49058 100644 --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile @@ -67,3 +67,4 @@ obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o obj-$(CONFIG_MTD_MTX1) += mtx-1_flash.o obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o +obj-$(CONFIG_MTD_BFIN_ASYNC) += bfin-async-flash.o diff --git a/drivers/mtd/maps/bfin-async-flash.c b/drivers/mtd/maps/bfin-async-flash.c new file mode 100644 index 00000000000..6fec86aaed7 --- /dev/null +++ b/drivers/mtd/maps/bfin-async-flash.c @@ -0,0 +1,219 @@ +/* + * drivers/mtd/maps/bfin-async-flash.c + * + * Handle the case where flash memory and ethernet mac/phy are + * mapped onto the same async bank. The BF533-STAMP does this + * for example. All board-specific configuration goes in your + * board resources file. + * + * Copyright 2000 Nicolas Pitre <nico@cam.org> + * Copyright 2005-2008 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/map.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/platform_device.h> +#include <linux/types.h> + +#include <asm/blackfin.h> +#include <linux/gpio.h> +#include <linux/io.h> +#include <asm/unaligned.h> + +#define pr_devinit(fmt, args...) ({ static const __devinitconst char __fmt[] = fmt; printk(__fmt, ## args); }) + +#define DRIVER_NAME "bfin-async-flash" + +struct async_state { + struct mtd_info *mtd; + struct map_info map; + int enet_flash_pin; + uint32_t flash_ambctl0, flash_ambctl1; + uint32_t save_ambctl0, save_ambctl1; + unsigned long irq_flags; +}; + +static void switch_to_flash(struct async_state *state) +{ + local_irq_save(state->irq_flags); + + gpio_set_value(state->enet_flash_pin, 0); + + state->save_ambctl0 = bfin_read_EBIU_AMBCTL0(); + state->save_ambctl1 = bfin_read_EBIU_AMBCTL1(); + bfin_write_EBIU_AMBCTL0(state->flash_ambctl0); + bfin_write_EBIU_AMBCTL1(state->flash_ambctl1); + SSYNC(); +} + +static void switch_back(struct async_state *state) +{ + bfin_write_EBIU_AMBCTL0(state->save_ambctl0); + bfin_write_EBIU_AMBCTL1(state->save_ambctl1); + SSYNC(); + + gpio_set_value(state->enet_flash_pin, 1); + + local_irq_restore(state->irq_flags); +} + +static map_word bfin_read(struct map_info *map, unsigned long ofs) +{ + struct async_state *state = (struct async_state *)map->map_priv_1; + uint16_t word; + map_word test; + + switch_to_flash(state); + + word = readw(map->virt + ofs); + + switch_back(state); + + test.x[0] = word; + return test; +} + +static void bfin_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) +{ + struct async_state *state = (struct async_state *)map->map_priv_1; + + switch_to_flash(state); + + memcpy(to, map->virt + from, len); + + switch_back(state); +} + +static void bfin_write(struct map_info *map, map_word d1, unsigned long ofs) +{ + struct async_state *state = (struct async_state *)map->map_priv_1; + uint16_t d; + + d = d1.x[0]; + + switch_to_flash(state); + + writew(d, map->virt + ofs); + SSYNC(); + + switch_back(state); +} + +static void bfin_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len) +{ + struct async_state *state = (struct async_state *)map->map_priv_1; + + switch_to_flash(state); + + memcpy(map->virt + to, from, len); + SSYNC(); + + switch_back(state); +} + +#ifdef CONFIG_MTD_PARTITIONS +static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL }; +#endif + +static int __devinit bfin_flash_probe(struct platform_device *pdev) +{ + int ret; + struct physmap_flash_data *pdata = pdev->dev.platform_data; + struct resource *memory = platform_get_resource(pdev, IORESOURCE_MEM, 0); + struct resource *flash_ambctl = platform_get_resource(pdev, IORESOURCE_MEM, 1); + struct async_state *state; + + state = kzalloc(sizeof(*state), GFP_KERNEL); + if (!state) + return -ENOMEM; + + state->map.name = DRIVER_NAME; + state->map.read = bfin_read; + state->map.copy_from = bfin_copy_from; + state->map.write = bfin_write; + state->map.copy_to = bfin_copy_to; + state->map.bankwidth = pdata->width; + state->map.size = memory->end - memory->start + 1; + state->map.virt = (void __iomem *)memory->start; + state->map.phys = memory->start; + state->map.map_priv_1 = (unsigned long)state; + state->enet_flash_pin = platform_get_irq(pdev, 0); + state->flash_ambctl0 = flash_ambctl->start; + state->flash_ambctl1 = flash_ambctl->end; + + if (gpio_request(state->enet_flash_pin, DRIVER_NAME)) { + pr_devinit(KERN_ERR DRIVER_NAME ": Failed to request gpio %d\n", state->enet_flash_pin); + return -EBUSY; + } + gpio_direction_output(state->enet_flash_pin, 1); + + pr_devinit(KERN_NOTICE DRIVER_NAME ": probing %d-bit flash bus\n", state->map.bankwidth * 8); + state->mtd = do_map_probe(memory->name, &state->map); + if (!state->mtd) + return -ENXIO; + +#ifdef CONFIG_MTD_PARTITIONS + ret = parse_mtd_partitions(state->mtd, part_probe_types, &pdata->parts, 0); + if (ret > 0) { + pr_devinit(KERN_NOTICE DRIVER_NAME ": Using commandline partition definition\n"); + add_mtd_partitions(state->mtd, pdata->parts, ret); + + } else if (pdata->nr_parts) { + pr_devinit(KERN_NOTICE DRIVER_NAME ": Using board partition definition\n"); + add_mtd_partitions(state->mtd, pdata->parts, pdata->nr_parts); + + } else +#endif + { + pr_devinit(KERN_NOTICE DRIVER_NAME ": no partition info available, registering whole flash at once\n"); + add_mtd_device(state->mtd); + } + + platform_set_drvdata(pdev, state); + + return 0; +} + +static int __devexit bfin_flash_remove(struct platform_device *pdev) +{ + struct async_state *state = platform_get_drvdata(pdev); + gpio_free(state->enet_flash_pin); +#ifdef CONFIG_MTD_PARTITIONS + del_mtd_partitions(state->mtd); +#endif + map_destroy(state->mtd); + kfree(state); + return 0; +} + +static struct platform_driver bfin_flash_driver = { + .probe = bfin_flash_probe, + .remove = __devexit_p(bfin_flash_remove), + .driver = { + .name = DRIVER_NAME, + }, +}; + +static int __init bfin_flash_init(void) +{ + return platform_driver_register(&bfin_flash_driver); +} +module_init(bfin_flash_init); + +static void __exit bfin_flash_exit(void) +{ + platform_driver_unregister(&bfin_flash_driver); +} +module_exit(bfin_flash_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("MTD map driver for Blackfins with flash/ethernet on same async bank"); |