summaryrefslogtreecommitdiffstats
path: root/drivers/mtd
diff options
context:
space:
mode:
authorChuanxiao Dong <chuanxiao.dong@intel.com>2010-08-11 17:46:00 +0800
committerDavid Woodhouse <David.Woodhouse@intel.com>2010-08-12 11:10:36 +0100
commitb292c341e2304b1d937843711c63d1e141d7b589 (patch)
tree1f408aeb08f4045c71d0ca2294f242320a0207b3 /drivers/mtd
parentef077179a2909d3d0d3accf29ad1ea9ebb19019b (diff)
nand/denali: Fixed check patch warnings
waring: no space for starting a line Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Diffstat (limited to 'drivers/mtd')
-rw-r--r--drivers/mtd/nand/denali.c25
1 files changed, 13 insertions, 12 deletions
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index f59dd03f36d..3ba89525cf0 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -56,7 +56,7 @@ MODULE_PARM_DESC(onfi_timing_mode, "Overrides default ONFI setting."
INTR_STATUS0__ERASE_COMP)
/* indicates whether or not the internal value for the flash bank is
- valid or not */
+ * valid or not */
#define CHIP_SELECT_INVALID -1
#define SUPPORT_8BITECC 1
@@ -71,7 +71,7 @@ MODULE_PARM_DESC(onfi_timing_mode, "Overrides default ONFI setting."
#define mtd_to_denali(m) container_of(m, struct denali_nand_info, mtd)
/* These constants are defined by the driver to enable common driver
- configuration options. */
+ * configuration options. */
#define SPARE_ACCESS 0x41
#define MAIN_ACCESS 0x42
#define MAIN_SPARE_ACCESS 0x43
@@ -97,7 +97,7 @@ static const struct pci_device_id denali_pci_ids[] = {
/* these are static lookup tables that give us easy access to
- registers in the NAND controller.
+ * registers in the NAND controller.
*/
static const uint32_t intr_status_addresses[4] = {INTR_STATUS0,
INTR_STATUS1,
@@ -429,7 +429,7 @@ static void get_hynix_nand_para(struct denali_nand_info *denali,
}
/* determines how many NAND chips are connected to the controller. Note for
- Intel CE4100 devices we don't support more than one device.
+ * Intel CE4100 devices we don't support more than one device.
*/
static void find_valid_banks(struct denali_nand_info *denali)
{
@@ -572,7 +572,7 @@ static void denali_set_intr_modes(struct denali_nand_info *denali,
}
/* validation function to verify that the controlling software is making
- a valid request
+ * a valid request
*/
static inline bool is_flash_bank_valid(int flash_bank)
{
@@ -726,7 +726,7 @@ static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask)
}
/* This helper function setups the registers for ECC and whether or not
- the spare area will be transfered. */
+ * the spare area will be transfered. */
static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en,
bool transfer_spare)
{
@@ -743,7 +743,7 @@ static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en,
}
/* sends a pipeline command operation to the controller. See the Denali NAND
- controller's user guide for more information (section 4.2.3.6).
+ * controller's user guide for more information (section 4.2.3.6).
*/
static int denali_send_pipeline_cmd(struct denali_nand_info *denali,
bool ecc_en,
@@ -1042,7 +1042,7 @@ static void denali_setup_dma(struct denali_nand_info *denali, int op)
}
/* writes a page. user specifies type, and this function handles the
- configuration details. */
+ * configuration details. */
static void write_page(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf, bool raw_xfer)
{
@@ -1099,8 +1099,9 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *chip,
/* NAND core entry points */
/* this is the callback that the NAND core calls to write a page. Since
- writing a page with ECC or without is similar, all the work is done
- by write_page above. */
+ * writing a page with ECC or without is similar, all the work is done
+ * by write_page above.
+ * */
static void denali_write_page(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf)
{
@@ -1110,8 +1111,8 @@ static void denali_write_page(struct mtd_info *mtd, struct nand_chip *chip,
}
/* This is the callback that the NAND core calls to write a page without ECC.
- raw access is similiar to ECC page writes, so all the work is done in the
- write_page() function above.
+ * raw access is similiar to ECC page writes, so all the work is done in the
+ * write_page() function above.
*/
static void denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf)