Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 293 insertions, 0 deletions

diff --git a/drivers/net/3c505.h b/drivers/net/3c505.h
new file mode 100644
index 00000000000..77dfeedff81
--- /dev/null
+++ b/drivers/net/3c505.h
@@ -0,0 +1,293 @@
+/*****************************************************************
+ *
+ *  defines for 3Com Etherlink Plus adapter
+ *
+ *****************************************************************/
+
+#define ELP_DMA       6
+#define ELP_RX_PCBS   4
+#define ELP_MAX_CARDS 4
+
+/*
+ * I/O register offsets
+ */
+#define	PORT_COMMAND	0x00	/* read/write, 8-bit */
+#define	PORT_STATUS	0x02	/* read only, 8-bit */
+#define	PORT_AUXDMA	0x02	/* write only, 8-bit */
+#define	PORT_DATA	0x04	/* read/write, 16-bit */
+#define	PORT_CONTROL	0x06	/* read/write, 8-bit */
+
+#define ELP_IO_EXTENT	0x10	/* size of used IO registers */
+
+/*
+ * host control registers bits
+ */
+#define	ATTN	0x80	/* attention */
+#define	FLSH	0x40	/* flush data register */
+#define DMAE	0x20	/* DMA enable */
+#define DIR	0x10	/* direction */
+#define	TCEN	0x08	/* terminal count interrupt enable */
+#define	CMDE	0x04	/* command register interrupt enable */
+#define	HSF2	0x02	/* host status flag 2 */
+#define	HSF1	0x01	/* host status flag 1 */
+
+/*
+ * combinations of HSF flags used for PCB transmission
+ */
+#define	HSF_PCB_ACK	HSF1
+#define	HSF_PCB_NAK	HSF2
+#define	HSF_PCB_END	(HSF2|HSF1)
+#define	HSF_PCB_MASK	(HSF2|HSF1)
+
+/*
+ * host status register bits
+ */
+#define	HRDY	0x80	/* data register ready */
+#define	HCRE	0x40	/* command register empty */
+#define	ACRF	0x20	/* adapter command register full */
+/* #define DIR 	0x10	direction - same as in control register */
+#define	DONE	0x08	/* DMA done */
+#define	ASF3	0x04	/* adapter status flag 3 */
+#define	ASF2	0x02	/* adapter status flag 2 */
+#define	ASF1	0x01	/* adapter status flag 1 */
+
+/*
+ * combinations of ASF flags used for PCB reception
+ */
+#define	ASF_PCB_ACK	ASF1
+#define	ASF_PCB_NAK	ASF2
+#define	ASF_PCB_END	(ASF2|ASF1)
+#define	ASF_PCB_MASK	(ASF2|ASF1)
+
+/*
+ * host aux DMA register bits
+ */
+#define	DMA_BRST	0x01	/* DMA burst */
+
+/*
+ * maximum amount of data allowed in a PCB
+ */
+#define	MAX_PCB_DATA	62
+
+/*****************************************************************
+ *
+ *  timeout value
+ *	this is a rough value used for loops to stop them from 
+ *	locking up the whole machine in the case of failure or
+ *	error conditions
+ *
+ *****************************************************************/
+
+#define	TIMEOUT	300
+
+/*****************************************************************
+ *
+ * PCB commands
+ *
+ *****************************************************************/
+
+enum {
+  /*
+   * host PCB commands
+   */
+  CMD_CONFIGURE_ADAPTER_MEMORY	= 0x01,
+  CMD_CONFIGURE_82586		= 0x02,
+  CMD_STATION_ADDRESS		= 0x03,
+  CMD_DMA_DOWNLOAD		= 0x04,
+  CMD_DMA_UPLOAD		= 0x05,
+  CMD_PIO_DOWNLOAD		= 0x06,
+  CMD_PIO_UPLOAD		= 0x07,
+  CMD_RECEIVE_PACKET		= 0x08,
+  CMD_TRANSMIT_PACKET		= 0x09,
+  CMD_NETWORK_STATISTICS	= 0x0a,
+  CMD_LOAD_MULTICAST_LIST	= 0x0b,
+  CMD_CLEAR_PROGRAM		= 0x0c,
+  CMD_DOWNLOAD_PROGRAM		= 0x0d,
+  CMD_EXECUTE_PROGRAM		= 0x0e,
+  CMD_SELF_TEST			= 0x0f,
+  CMD_SET_STATION_ADDRESS	= 0x10,
+  CMD_ADAPTER_INFO		= 0x11,
+  NUM_TRANSMIT_CMDS,
+
+  /*
+   * adapter PCB commands
+   */
+  CMD_CONFIGURE_ADAPTER_RESPONSE	= 0x31,
+  CMD_CONFIGURE_82586_RESPONSE		= 0x32,
+  CMD_ADDRESS_RESPONSE			= 0x33,
+  CMD_DOWNLOAD_DATA_REQUEST		= 0x34,
+  CMD_UPLOAD_DATA_REQUEST		= 0x35,
+  CMD_RECEIVE_PACKET_COMPLETE		= 0x38,
+  CMD_TRANSMIT_PACKET_COMPLETE		= 0x39,
+  CMD_NETWORK_STATISTICS_RESPONSE	= 0x3a,
+  CMD_LOAD_MULTICAST_RESPONSE		= 0x3b,
+  CMD_CLEAR_PROGRAM_RESPONSE		= 0x3c,
+  CMD_DOWNLOAD_PROGRAM_RESPONSE		= 0x3d,
+  CMD_EXECUTE_RESPONSE			= 0x3e,
+  CMD_SELF_TEST_RESPONSE		= 0x3f,
+  CMD_SET_ADDRESS_RESPONSE		= 0x40,
+  CMD_ADAPTER_INFO_RESPONSE		= 0x41
+};
+
+/* Definitions for the PCB data structure */
+
+/* Data units */
+typedef unsigned char         byte;
+typedef unsigned short int    word;
+typedef unsigned long int     dword;
+
+/* Data structures */
+struct Memconf {
+	word	cmd_q,
+		rcv_q,
+		mcast,
+		frame,
+		rcv_b,
+		progs;
+};
+
+struct Rcv_pkt {
+	word	buf_ofs,
+		buf_seg,
+		buf_len,
+		timeout;
+};
+
+struct Xmit_pkt {
+	word	buf_ofs,
+		buf_seg,
+		pkt_len;
+};
+
+struct Rcv_resp {
+	word	buf_ofs,
+		buf_seg,
+		buf_len,
+		pkt_len,
+		timeout,
+		status;
+	dword	timetag;
+};
+
+struct Xmit_resp {
+	word	buf_ofs,
+		buf_seg,
+		c_stat,
+		status;
+};
+
+
+struct Netstat {
+	dword	tot_recv,
+		tot_xmit;
+	word	err_CRC,
+		err_align,
+		err_res,
+		err_ovrrun;
+};
+
+
+struct Selftest {
+	word	error;
+	union {
+		word ROM_cksum;
+		struct {
+			word ofs, seg;
+		} RAM;
+		word i82586;
+	} failure;
+};
+
+struct Info {
+	byte	minor_vers,
+		major_vers;
+	word	ROM_cksum,
+		RAM_sz,
+		free_ofs,
+		free_seg;
+};
+
+struct Memdump {
+       word size,
+            off,
+            seg;
+};
+
+/*
+Primary Command Block. The most important data structure. All communication
+between the host and the adapter is done with these. (Except for the actual
+Ethernet data, which has different packaging.)
+*/
+typedef struct {
+	byte	command;
+	byte	length;
+	union	{
+		struct Memconf		memconf;
+		word			configure;
+		struct Rcv_pkt		rcv_pkt;
+		struct Xmit_pkt		xmit_pkt;
+		byte			multicast[10][6];
+		byte			eth_addr[6];
+		byte			failed;
+		struct Rcv_resp		rcv_resp;
+		struct Xmit_resp	xmit_resp;
+		struct Netstat		netstat;
+		struct Selftest		selftest;
+		struct Info		info;
+		struct Memdump    	memdump;
+		byte			raw[62];
+	} data;
+} pcb_struct;
+
+/* These defines for 'configure' */
+#define RECV_STATION	0x00
+#define RECV_BROAD	0x01
+#define RECV_MULTI	0x02
+#define RECV_PROMISC	0x04
+#define NO_LOOPBACK	0x00
+#define INT_LOOPBACK	0x08
+#define EXT_LOOPBACK	0x10
+
+/*****************************************************************
+ *
+ *  structure to hold context information for adapter
+ *
+ *****************************************************************/
+
+#define DMA_BUFFER_SIZE  1600
+#define BACKLOG_SIZE      4
+
+typedef struct {
+	volatile short got[NUM_TRANSMIT_CMDS];	/* flags for
+						   command completion */
+	pcb_struct tx_pcb;	/* PCB for foreground sending */
+	pcb_struct rx_pcb;	/* PCB for foreground receiving */
+	pcb_struct itx_pcb;	/* PCB for background sending */
+	pcb_struct irx_pcb;	/* PCB for background receiving */
+	struct net_device_stats stats;
+
+	void *dma_buffer;
+
+	struct {
+		unsigned int length[BACKLOG_SIZE];
+		unsigned int in;
+		unsigned int out;
+	} rx_backlog;
+
+	struct {
+		unsigned int direction;
+		unsigned int length;
+		struct sk_buff *skb;
+	        void *target;
+		unsigned long start_time;
+	} current_dma;
+
+	/* flags */
+	unsigned long send_pcb_semaphore;
+	unsigned long dmaing;
+	unsigned long busy;
+
+	unsigned int rx_active;  /* number of receive PCBs */
+        volatile unsigned char hcr_val;  /* what we think the HCR contains */
+        spinlock_t lock;	/* Interrupt v tx lock */
+} elp_device;