summaryrefslogtreecommitdiffstats
path: root/drivers/net/Makefile
diff options
context:
space:
mode:
authorGrant Likely <grant.likely@secretlab.ca>2009-04-25 12:53:39 +0000
committerDavid S. Miller <davem@davemloft.net>2009-04-27 02:53:52 -0700
commit92744989533cbe85e8057935d230e128810168ce (patch)
tree348bffc9bc393031feed8a8ac86dccab9a8ce636 /drivers/net/Makefile
parentaa73832c5a80d6c52c69b18af858d88fa595dd3c (diff)
net: add Xilinx ll_temac device driver
This patch adds support for the Xilinx ll_temac 10/100/1000 Ethernet device. The ll_temac ipcore is typically used on Xilinx Virtex and Spartan designs attached to either a PowerPC 4xx or Microblaze processor. At the present moment, this driver only works with Virtex5 PowerPC designs because it assumes DCR is used to access the DMA registers. However, the low level access to DMA registers is abstracted and it should be easy to adapt for the other implementations. I'm posting this driver now as an RFC. There are still some things that need to be tightened up, but it does appear to be stable. Derived from driver code written by Yoshio Kashiwagi and David H. Lynch Jr. Tested on Xilinx ML507 eval board with Base System Builder generated FPGA design. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/Makefile')
-rw-r--r--drivers/net/Makefile2
1 files changed, 2 insertions, 0 deletions
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 1fc4602a6ff..80420f6d079 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -134,6 +134,8 @@ obj-$(CONFIG_AX88796) += ax88796.o
obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o
obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o
+ll_temac-objs := ll_temac_main.o ll_temac_mdio.o
+obj-$(CONFIG_XILINX_LL_TEMAC) += ll_temac.o
obj-$(CONFIG_QLA3XXX) += qla3xxx.o
obj-$(CONFIG_QLGE) += qlge/