diff options
| author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
| commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
| tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/net/acenic.c | |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/net/acenic.c')
| -rw-r--r-- | drivers/net/acenic.c | 3271 |
1 files changed, 3271 insertions, 0 deletions
diff --git a/drivers/net/acenic.c b/drivers/net/acenic.c new file mode 100644 index 00000000000..6eea3a8accb --- /dev/null +++ b/drivers/net/acenic.c @@ -0,0 +1,3271 @@ +/* + * acenic.c: Linux driver for the Alteon AceNIC Gigabit Ethernet card + * and other Tigon based cards. + * + * Copyright 1998-2002 by Jes Sorensen, <jes@trained-monkey.org>. + * + * Thanks to Alteon and 3Com for providing hardware and documentation + * enabling me to write this driver. + * + * A mailing list for discussing the use of this driver has been + * setup, please subscribe to the lists if you have any questions + * about the driver. Send mail to linux-acenic-help@sunsite.auc.dk to + * see how to subscribe. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Additional credits: + * Pete Wyckoff <wyckoff@ca.sandia.gov>: Initial Linux/Alpha and trace + * dump support. The trace dump support has not been + * integrated yet however. + * Troy Benjegerdes: Big Endian (PPC) patches. + * Nate Stahl: Better out of memory handling and stats support. + * Aman Singla: Nasty race between interrupt handler and tx code dealing + * with 'testing the tx_ret_csm and setting tx_full' + * David S. Miller <davem@redhat.com>: conversion to new PCI dma mapping + * infrastructure and Sparc support + * Pierrick Pinasseau (CERN): For lending me an Ultra 5 to test the + * driver under Linux/Sparc64 + * Matt Domsch <Matt_Domsch@dell.com>: Detect Alteon 1000baseT cards + * ETHTOOL_GDRVINFO support + * Chip Salzenberg <chip@valinux.com>: Fix race condition between tx + * handler and close() cleanup. + * Ken Aaker <kdaaker@rchland.vnet.ibm.com>: Correct check for whether + * memory mapped IO is enabled to + * make the driver work on RS/6000. + * Takayoshi Kouchi <kouchi@hpc.bs1.fc.nec.co.jp>: Identifying problem + * where the driver would disable + * bus master mode if it had to disable + * write and invalidate. + * Stephen Hack <stephen_hack@hp.com>: Fixed ace_set_mac_addr for little + * endian systems. + * Val Henson <vhenson@esscom.com>: Reset Jumbo skb producer and + * rx producer index when + * flushing the Jumbo ring. + * Hans Grobler <grobh@sun.ac.za>: Memory leak fixes in the + * driver init path. + * Grant Grundler <grundler@cup.hp.com>: PCI write posting fixes. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/version.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/mm.h> +#include <linux/highmem.h> +#include <linux/sockios.h> + +#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) +#include <linux/if_vlan.h> +#endif + +#ifdef SIOCETHTOOL +#include <linux/ethtool.h> +#endif + +#include <net/sock.h> +#include <net/ip.h> + +#include <asm/system.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/byteorder.h> +#include <asm/uaccess.h> + + +#define DRV_NAME "acenic" + +#undef INDEX_DEBUG + +#ifdef CONFIG_ACENIC_OMIT_TIGON_I +#define ACE_IS_TIGON_I(ap) 0 +#define ACE_TX_RING_ENTRIES(ap) MAX_TX_RING_ENTRIES +#else +#define ACE_IS_TIGON_I(ap) (ap->version == 1) +#define ACE_TX_RING_ENTRIES(ap) ap->tx_ring_entries +#endif + +#ifndef PCI_VENDOR_ID_ALTEON +#define PCI_VENDOR_ID_ALTEON 0x12ae +#endif +#ifndef PCI_DEVICE_ID_ALTEON_ACENIC_FIBRE +#define PCI_DEVICE_ID_ALTEON_ACENIC_FIBRE 0x0001 +#define PCI_DEVICE_ID_ALTEON_ACENIC_COPPER 0x0002 +#endif +#ifndef PCI_DEVICE_ID_3COM_3C985 +#define PCI_DEVICE_ID_3COM_3C985 0x0001 +#endif +#ifndef PCI_VENDOR_ID_NETGEAR +#define PCI_VENDOR_ID_NETGEAR 0x1385 +#define PCI_DEVICE_ID_NETGEAR_GA620 0x620a +#endif +#ifndef PCI_DEVICE_ID_NETGEAR_GA620T +#define PCI_DEVICE_ID_NETGEAR_GA620T 0x630a +#endif + + +/* + * Farallon used the DEC vendor ID by mistake and they seem not + * to care - stinky! + */ +#ifndef PCI_DEVICE_ID_FARALLON_PN9000SX +#define PCI_DEVICE_ID_FARALLON_PN9000SX 0x1a +#endif +#ifndef PCI_DEVICE_ID_FARALLON_PN9100T +#define PCI_DEVICE_ID_FARALLON_PN9100T 0xfa +#endif +#ifndef PCI_VENDOR_ID_SGI +#define PCI_VENDOR_ID_SGI 0x10a9 +#endif +#ifndef PCI_DEVICE_ID_SGI_ACENIC +#define PCI_DEVICE_ID_SGI_ACENIC 0x0009 +#endif + +static struct pci_device_id acenic_pci_tbl[] = { + { PCI_VENDOR_ID_ALTEON, PCI_DEVICE_ID_ALTEON_ACENIC_FIBRE, + PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NETWORK_ETHERNET << 8, 0xffff00, }, + { PCI_VENDOR_ID_ALTEON, PCI_DEVICE_ID_ALTEON_ACENIC_COPPER, + PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NETWORK_ETHERNET << 8, 0xffff00, }, + { PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C985, + PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NETWORK_ETHERNET << 8, 0xffff00, }, + { PCI_VENDOR_ID_NETGEAR, PCI_DEVICE_ID_NETGEAR_GA620, + PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NETWORK_ETHERNET << 8, 0xffff00, }, + { PCI_VENDOR_ID_NETGEAR, PCI_DEVICE_ID_NETGEAR_GA620T, + PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NETWORK_ETHERNET << 8, 0xffff00, }, + /* + * Farallon used the DEC vendor ID on their cards incorrectly, + * then later Alteon's ID. + */ + { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_FARALLON_PN9000SX, + PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NETWORK_ETHERNET << 8, 0xffff00, }, + { PCI_VENDOR_ID_ALTEON, PCI_DEVICE_ID_FARALLON_PN9100T, + PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NETWORK_ETHERNET << 8, 0xffff00, }, + { PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_ACENIC, + PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NETWORK_ETHERNET << 8, 0xffff00, }, + { } +}; +MODULE_DEVICE_TABLE(pci, acenic_pci_tbl); + +#ifndef SET_NETDEV_DEV +#define SET_NETDEV_DEV(net, pdev) do{} while(0) +#endif + +#if LINUX_VERSION_CODE >= 0x2051c +#define ace_sync_irq(irq) synchronize_irq(irq) +#else +#define ace_sync_irq(irq) synchronize_irq() +#endif + +#ifndef offset_in_page +#define offset_in_page(ptr) ((unsigned long)(ptr) & ~PAGE_MASK) +#endif + +#define ACE_MAX_MOD_PARMS 8 +#define BOARD_IDX_STATIC 0 +#define BOARD_IDX_OVERFLOW -1 + +#if (defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)) && \ + defined(NETIF_F_HW_VLAN_RX) +#define ACENIC_DO_VLAN 1 +#define ACE_RCB_VLAN_FLAG RCB_FLG_VLAN_ASSIST +#else +#define ACENIC_DO_VLAN 0 +#define ACE_RCB_VLAN_FLAG 0 +#endif + +#include "acenic.h" + +/* + * These must be defined before the firmware is included. + */ +#define MAX_TEXT_LEN 96*1024 +#define MAX_RODATA_LEN 8*1024 +#define MAX_DATA_LEN 2*1024 + +#include "acenic_firmware.h" + +#ifndef tigon2FwReleaseLocal +#define tigon2FwReleaseLocal 0 +#endif + +/* + * This driver currently supports Tigon I and Tigon II based cards + * including the Alteon AceNIC, the 3Com 3C985[B] and NetGear + * GA620. The driver should also work on the SGI, DEC and Farallon + * versions of the card, however I have not been able to test that + * myself. + * + * This card is really neat, it supports receive hardware checksumming + * and jumbo frames (up to 9000 bytes) and does a lot of work in the + * firmware. Also the programming interface is quite neat, except for + * the parts dealing with the i2c eeprom on the card ;-) + * + * Using jumbo frames: + * + * To enable jumbo frames, simply specify an mtu between 1500 and 9000 + * bytes to ifconfig. Jumbo frames can be enabled or disabled at any time + * by running `ifconfig eth<X> mtu <MTU>' with <X> being the Ethernet + * interface number and <MTU> being the MTU value. + * + * Module parameters: + * + * When compiled as a loadable module, the driver allows for a number + * of module parameters to be specified. The driver supports the + * following module parameters: + * + * trace=<val> - Firmware trace level. This requires special traced + * firmware to replace the firmware supplied with + * the driver - for debugging purposes only. + * + * link=<val> - Link state. Normally you want to use the default link + * parameters set by the driver. This can be used to + * override these in case your switch doesn't negotiate + * the link properly. Valid values are: + * 0x0001 - Force half duplex link. + * 0x0002 - Do not negotiate line speed with the other end. + * 0x0010 - 10Mbit/sec link. + * 0x0020 - 100Mbit/sec link. + * 0x0040 - 1000Mbit/sec link. + * 0x0100 - Do not negotiate flow control. + * 0x0200 - Enable RX flow control Y + * 0x0400 - Enable TX flow control Y (Tigon II NICs only). + * Default value is 0x0270, ie. enable link+flow + * control negotiation. Negotiating the highest + * possible link speed with RX flow control enabled. + * + * When disabling link speed negotiation, only one link + * speed is allowed to be specified! + * + * tx_coal_tick=<val> - number of coalescing clock ticks (us) allowed + * to wait for more packets to arive before + * interrupting the host, from the time the first + * packet arrives. + * + * rx_coal_tick=<val> - number of coalescing clock ticks (us) allowed + * to wait for more packets to arive in the transmit ring, + * before interrupting the host, after transmitting the + * first packet in the ring. + * + * max_tx_desc=<val> - maximum number of transmit descriptors + * (packets) transmitted before interrupting the host. + * + * max_rx_desc=<val> - maximum number of receive descriptors + * (packets) received before interrupting the host. + * + * tx_ratio=<val> - 7 bit value (0 - 63) specifying the split in 64th + * increments of the NIC's on board memory to be used for + * transmit and receive buffers. For the 1MB NIC app. 800KB + * is available, on the 1/2MB NIC app. 300KB is available. + * 68KB will always be available as a minimum for both + * directions. The default value is a 50/50 split. + * dis_pci_mem_inval=<val> - disable PCI memory write and invalidate + * operations, default (1) is to always disable this as + * that is what Alteon does on NT. I have not been able + * to measure any real performance differences with + * this on my systems. Set <val>=0 if you want to + * enable these operations. + * + * If you use more than one NIC, specify the parameters for the + * individual NICs with a comma, ie. trace=0,0x00001fff,0 you want to + * run tracing on NIC #2 but not on NIC #1 and #3. + * + * TODO: + * + * - Proper multicast support. + * - NIC dump support. + * - More tuning parameters. + * + * The mini ring is not used under Linux and I am not sure it makes sense + * to actually use it. + * + * New interrupt handler strategy: + * + * The old interrupt handler worked using the traditional method of + * replacing an skbuff with a new one when a packet arrives. However + * the rx rings do not need to contain a static number of buffer + * descriptors, thus it makes sense to move the memory allocation out + * of the main interrupt handler and do it in a bottom half handler + * and only allocate new buffers when the number of buffers in the + * ring is below a certain threshold. In order to avoid starving the + * NIC under heavy load it is however necessary to force allocation + * when hitting a minimum threshold. The strategy for alloction is as + * follows: + * + * RX_LOW_BUF_THRES - allocate buffers in the bottom half + * RX_PANIC_LOW_THRES - we are very low on buffers, allocate + * the buffers in the interrupt handler + * RX_RING_THRES - maximum number of buffers in the rx ring + * RX_MINI_THRES - maximum number of buffers in the mini ring + * RX_JUMBO_THRES - maximum number of buffers in the jumbo ring + * + * One advantagous side effect of this allocation approach is that the + * entire rx processing can be done without holding any spin lock + * since the rx rings and registers are totally independent of the tx + * ring and its registers. This of course includes the kmalloc's of + * new skb's. Thus start_xmit can run in parallel with rx processing + * and the memory allocation on SMP systems. + * + * Note that running the skb reallocation in a bottom half opens up + * another can of races which needs to be handled properly. In + * particular it can happen that the interrupt handler tries to run + * the reallocation while the bottom half is either running on another + * CPU or was interrupted on the same CPU. To get around this the + * driver uses bitops to prevent the reallocation routines from being + * reentered. + * + * TX handling can also be done without holding any spin lock, wheee + * this is fun! since tx_ret_csm is only written to by the interrupt + * handler. The case to be aware of is when shutting down the device + * and cleaning up where it is necessary to make sure that + * start_xmit() is not running while this is happening. Well DaveM + * informs me that this case is already protected against ... bye bye + * Mr. Spin Lock, it was nice to know you. + * + * TX interrupts are now partly disabled so the NIC will only generate + * TX interrupts for the number of coal ticks, not for the number of + * TX packets in the queue. This should reduce the number of TX only, + * ie. when no RX processing is done, interrupts seen. + */ + +/* + * Threshold values for RX buffer allocation - the low water marks for + * when to start refilling the rings are set to 75% of the ring + * sizes. It seems to make sense to refill the rings entirely from the + * intrrupt handler once it gets below the panic threshold, that way + * we don't risk that the refilling is moved to another CPU when the + * one running the interrupt handler just got the slab code hot in its + * cache. + */ +#define RX_RING_SIZE 72 +#define RX_MINI_SIZE 64 +#define RX_JUMBO_SIZE 48 + +#define RX_PANIC_STD_THRES 16 +#define RX_PANIC_STD_REFILL (3*RX_PANIC_STD_THRES)/2 +#define RX_LOW_STD_THRES (3*RX_RING_SIZE)/4 +#define RX_PANIC_MINI_THRES 12 +#define RX_PANIC_MINI_REFILL (3*RX_PANIC_MINI_THRES)/2 +#define RX_LOW_MINI_THRES (3*RX_MINI_SIZE)/4 +#define RX_PANIC_JUMBO_THRES 6 +#define RX_PANIC_JUMBO_REFILL (3*RX_PANIC_JUMBO_THRES)/2 +#define RX_LOW_JUMBO_THRES (3*RX_JUMBO_SIZE)/4 + + +/* + * Size of the mini ring entries, basically these just should be big + * enough to take TCP ACKs + */ +#define ACE_MINI_SIZE 100 + +#define ACE_MINI_BUFSIZE ACE_MINI_SIZE +#define ACE_STD_BUFSIZE (ACE_STD_MTU + ETH_HLEN + 4) +#define ACE_JUMBO_BUFSIZE (ACE_JUMBO_MTU + ETH_HLEN + 4) + +/* + * There seems to be a magic difference in the effect between 995 and 996 + * but little difference between 900 and 995 ... no idea why. + * + * There is now a default set of tuning parameters which is set, depending + * on whether or not the user enables Jumbo frames. It's assumed that if + * Jumbo frames are enabled, the user wants optimal tuning for that case. + */ +#define DEF_TX_COAL 400 /* 996 */ +#define DEF_TX_MAX_DESC 60 /* was 40 */ +#define DEF_RX_COAL 120 /* 1000 */ +#define DEF_RX_MAX_DESC 25 +#define DEF_TX_RATIO 21 /* 24 */ + +#define DEF_JUMBO_TX_COAL 20 +#define DEF_JUMBO_TX_MAX_DESC 60 +#define DEF_JUMBO_RX_COAL 30 +#define DEF_JUMBO_RX_MAX_DESC 6 +#define DEF_JUMBO_TX_RATIO 21 + +#if tigon2FwReleaseLocal < 20001118 +/* + * Standard firmware and early modifications duplicate + * IRQ load without this flag (coal timer is never reset). + * Note that with this flag tx_coal should be less than + * time to xmit full tx ring. + * 400usec is not so bad for tx ring size of 128. + */ +#define TX_COAL_INTS_ONLY 1 /* worth it */ +#else +/* + * With modified firmware, this is not necessary, but still useful. + */ +#define TX_COAL_INTS_ONLY 1 +#endif + +#define DEF_TRACE 0 +#define DEF_STAT (2 * TICKS_PER_SEC) + + +static int link[ACE_MAX_MOD_PARMS]; +static int trace[ACE_MAX_MOD_PARMS]; +static int tx_coal_tick[ACE_MAX_MOD_PARMS]; +static int rx_coal_tick[ACE_MAX_MOD_PARMS]; +static int max_tx_desc[ACE_MAX_MOD_PARMS]; +static int max_rx_desc[ACE_MAX_MOD_PARMS]; +static int tx_ratio[ACE_MAX_MOD_PARMS]; +static int dis_pci_mem_inval[ACE_MAX_MOD_PARMS] = {1, 1, 1, 1, 1, 1, 1, 1}; + +MODULE_AUTHOR("Jes Sorensen <jes@trained-monkey.org>"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("AceNIC/3C985/GA620 Gigabit Ethernet driver"); + +module_param_array(link, int, NULL, 0); +module_param_array(trace, int, NULL, 0); +module_param_array(tx_coal_tick, int, NULL, 0); +module_param_array(max_tx_desc, int, NULL, 0); +module_param_array(rx_coal_tick, int, NULL, 0); +module_param_array(max_rx_desc, int, NULL, 0); +module_param_array(tx_ratio, int, NULL, 0); +MODULE_PARM_DESC(link, "AceNIC/3C985/NetGear link state"); +MODULE_PARM_DESC(trace, "AceNIC/3C985/NetGear firmware trace level"); +MODULE_PARM_DESC(tx_coal_tick, "AceNIC/3C985/GA620 max clock ticks to wait from first tx descriptor arrives"); +MODULE_PARM_DESC(max_tx_desc, "AceNIC/3C985/GA620 max number of transmit descriptors to wait"); +MODULE_PARM_DESC(rx_coal_tick, "AceNIC/3C985/GA620 max clock ticks to wait from first rx descriptor arrives"); +MODULE_PARM_DESC(max_rx_desc, "AceNIC/3C985/GA620 max number of receive descriptors to wait"); +MODULE_PARM_DESC(tx_ratio, "AceNIC/3C985/GA620 ratio of NIC memory used for TX/RX descriptors (range 0-63)"); + + +static char version[] __devinitdata = + "acenic.c: v0.92 08/05/2002 Jes Sorensen, linux-acenic@SunSITE.dk\n" + " http://home.cern.ch/~jes/gige/acenic.html\n"; + +static int ace_get_settings(struct net_device *, struct ethtool_cmd *); +static int ace_set_settings(struct net_device *, struct ethtool_cmd *); +static void ace_get_drvinfo(struct net_device *, struct ethtool_drvinfo *); + +static struct ethtool_ops ace_ethtool_ops = { + .get_settings = ace_get_settings, + .set_settings = ace_set_settings, + .get_drvinfo = ace_get_drvinfo, +}; + +static void ace_watchdog(struct net_device *dev); + +static int __devinit acenic_probe_one(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct net_device *dev; + struct ace_private *ap; + static int boards_found; + + dev = alloc_etherdev(sizeof(struct ace_private)); + if (dev == NULL) { + printk(KERN_ERR "acenic: Unable to allocate " + "net_device structure!\n"); + return -ENOMEM; + } + + SET_MODULE_OWNER(dev); + SET_NETDEV_DEV(dev, &pdev->dev); + + ap = dev->priv; + ap->pdev = pdev; + ap->name = pci_name(pdev); + + dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM; +#if ACENIC_DO_VLAN + dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; + dev->vlan_rx_register = ace_vlan_rx_register; + dev->vlan_rx_kill_vid = ace_vlan_rx_kill_vid; +#endif + if (1) { + dev->tx_timeout = &ace_watchdog; + dev->watchdog_timeo = 5*HZ; + } + + dev->open = &ace_open; + dev->stop = &ace_close; + dev->hard_start_xmit = &ace_start_xmit; + dev->get_stats = &ace_get_stats; + dev->set_multicast_list = &ace_set_multicast_list; + SET_ETHTOOL_OPS(dev, &ace_ethtool_ops); + dev->set_mac_address = &ace_set_mac_addr; + dev->change_mtu = &ace_change_mtu; + + /* we only display this string ONCE */ + if (!boards_found) + printk(version); + + if (pci_enable_device(pdev)) + goto fail_free_netdev; + + /* + * Enable master mode before we start playing with the + * pci_command word since pci_set_master() will modify + * it. + */ + pci_set_master(pdev); + + pci_read_config_word(pdev, PCI_COMMAND, &ap->pci_command); + + /* OpenFirmware on Mac's does not set this - DOH.. */ + if (!(ap->pci_command & PCI_COMMAND_MEMORY)) { + printk(KERN_INFO "%s: Enabling PCI Memory Mapped " + "access - was not enabled by BIOS/Firmware\n", + ap->name); + ap->pci_command = ap->pci_command | PCI_COMMAND_MEMORY; + pci_write_config_word(ap->pdev, PCI_COMMAND, + ap->pci_command); + wmb(); + } + + pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &ap->pci_latency); + if (ap->pci_latency <= 0x40) { + ap->pci_latency = 0x40; + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, ap->pci_latency); + } + + /* + * Remap the regs into kernel space - this is abuse of + * dev->base_addr since it was means for I/O port + * addresses but who gives a damn. + */ + dev->base_addr = pci_resource_start(pdev, 0); + ap->regs = ioremap(dev->base_addr, 0x4000); + if (!ap->regs) { + printk(KERN_ERR "%s: Unable to map I/O register, " + "AceNIC %i will be disabled.\n", + ap->name, boards_found); + goto fail_free_netdev; + } + + switch(pdev->vendor) { + case PCI_VENDOR_ID_ALTEON: + if (pdev->device == PCI_DEVICE_ID_FARALLON_PN9100T) { + printk(KERN_INFO "%s: Farallon PN9100-T ", + ap->name); + } else { + printk(KERN_INFO "%s: Alteon AceNIC ", + ap->name); + } + break; + case PCI_VENDOR_ID_3COM: + printk(KERN_INFO "%s: 3Com 3C985 ", ap->name); + break; + case PCI_VENDOR_ID_NETGEAR: + printk(KERN_INFO "%s: NetGear GA620 ", ap->name); + break; + case PCI_VENDOR_ID_DEC: + if (pdev->device == PCI_DEVICE_ID_FARALLON_PN9000SX) { + printk(KERN_INFO "%s: Farallon PN9000-SX ", + ap->name); + break; + } + case PCI_VENDOR_ID_SGI: + printk(KERN_INFO "%s: SGI AceNIC ", ap->name); + break; + default: + printk(KERN_INFO "%s: Unknown AceNIC ", ap->name); + break; + } + + printk("Gigabit Ethernet at 0x%08lx, ", dev->base_addr); +#ifdef __sparc__ + printk("irq %s\n", __irq_itoa(pdev->irq)); +#else + printk("irq %i\n", pdev->irq); +#endif + +#ifdef CONFIG_ACENIC_OMIT_TIGON_I + if ((readl(&ap->regs->HostCtrl) >> 28) == 4) { + printk(KERN_ERR "%s: Driver compiled without Tigon I" + " support - NIC disabled\n", dev->name); + goto fail_uninit; + } +#endif + + if (ace_allocate_descriptors(dev)) + goto fail_free_netdev; + +#ifdef MODULE + if (boards_found >= ACE_MAX_MOD_PARMS) + ap->board_idx = BOARD_IDX_OVERFLOW; + else + ap->board_idx = boards_found; +#else + ap->board_idx = BOARD_IDX_STATIC; +#endif + + if (ace_init(dev)) + goto fail_free_netdev; + + if (register_netdev(dev)) { + printk(KERN_ERR "acenic: device registration failed\n"); + goto fail_uninit; + } + ap->name = dev->name; + + if (ap->pci_using_dac) + dev->features |= NETIF_F_HIGHDMA; + + pci_set_drvdata(pdev, dev); + + boards_found++; + return 0; + + fail_uninit: + ace_init_cleanup(dev); + fail_free_netdev: + free_netdev(dev); + return -ENODEV; +} + +static void __devexit acenic_remove_one(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct ace_private *ap = netdev_priv(dev); + struct ace_regs __iomem *regs = ap->regs; + short i; + + unregister_netdev(dev); + + writel(readl(®s->CpuCtrl) | CPU_HALT, ®s->CpuCtrl); + if (ap->version >= 2) + writel(readl(®s->CpuBCtrl) | CPU_HALT, ®s->CpuBCtrl); + + /* + * This clears any pending interrupts + */ + writel(1, ®s->Mb0Lo); + readl(®s->CpuCtrl); /* flush */ + + /* + * Make sure no other CPUs are processing interrupts + * on the card before the buffers are being released. + * Otherwise one might experience some `interesting' + * effects. + * + * Then release the RX buffers - jumbo buffers were + * already released in ace_close(). + */ + ace_sync_irq(dev->irq); + + for (i = 0; i < RX_STD_RING_ENTRIES; i++) { + struct sk_buff *skb = ap->skb->rx_std_skbuff[i].skb; + + if (skb) { + struct ring_info *ringp; + dma_addr_t mapping; + + ringp = &ap->skb->rx_std_skbuff[i]; + mapping = pci_unmap_addr(ringp, mapping); + pci_unmap_page(ap->pdev, mapping, + ACE_STD_BUFSIZE, + PCI_DMA_FROMDEVICE); + + ap->rx_std_ring[i].size = 0; + ap->skb->rx_std_skbuff[i].skb = NULL; + dev_kfree_skb(skb); + } + } + + if (ap->version >= 2) { + for (i = 0; i < RX_MINI_RING_ENTRIES; i++) { + struct sk_buff *skb = ap->skb->rx_mini_skbuff[i].skb; + + if (skb) { + struct ring_info *ringp; + dma_addr_t mapping; + + ringp = &ap->skb->rx_mini_skbuff[i]; + mapping = pci_unmap_addr(ringp,mapping); + pci_unmap_page(ap->pdev, mapping, + ACE_MINI_BUFSIZE, + PCI_DMA_FROMDEVICE); + + ap->rx_mini_ring[i].size = 0; + ap->skb->rx_mini_skbuff[i].skb = NULL; + dev_kfree_skb(skb); + } + } + } + + for (i = 0; i < RX_JUMBO_RING_ENTRIES; i++) { + struct sk_buff *skb = ap->skb->rx_jumbo_skbuff[i].skb; + if (skb) { + struct ring_info *ringp; + dma_addr_t mapping; + + ringp = &ap->skb->rx_jumbo_skbuff[i]; + mapping = pci_unmap_addr(ringp, mapping); + pci_unmap_page(ap->pdev, mapping, + ACE_JUMBO_BUFSIZE, + PCI_DMA_FROMDEVICE); + + ap->rx_jumbo_ring[i].size = 0; + ap->skb->rx_jumbo_skbuff[i].skb = NULL; + dev_kfree_skb(skb); + } + } + + ace_init_cleanup(dev); + free_netdev(dev); +} + +static struct pci_driver acenic_pci_driver = { + .name = "acenic", + .id_table = acenic_pci_tbl, + .probe = acenic_probe_one, + .remove = __devexit_p(acenic_remove_one), +}; + +static int __init acenic_init(void) +{ + return pci_module_init(&acenic_pci_driver); +} + +static void __exit acenic_exit(void) +{ + pci_unregister_driver(&acenic_pci_driver); +} + +module_init(acenic_init); +module_exit(acenic_exit); + +static void ace_free_descriptors(struct net_device *dev) +{ + struct ace_private *ap = netdev_priv(dev); + int size; + + if (ap->rx_std_ring != NULL) { + size = (sizeof(struct rx_desc) * + (RX_STD_RING_ENTRIES + + RX_JUMBO_RING_ENTRIES + + RX_MINI_RING_ENTRIES + + RX_RETURN_RING_ENTRIES)); + pci_free_consistent(ap->pdev, size, ap->rx_std_ring, + ap->rx_ring_base_dma); + ap->rx_std_ring = NULL; + ap->rx_jumbo_ring = NULL; + ap->rx_mini_ring = NULL; + ap->rx_return_ring = NULL; + } + if (ap->evt_ring != NULL) { + size = (sizeof(struct event) * EVT_RING_ENTRIES); + pci_free_consistent(ap->pdev, size, ap->evt_ring, + ap->evt_ring_dma); + ap->evt_ring = NULL; + } + if (ap->tx_ring != NULL && !ACE_IS_TIGON_I(ap)) { + size = (sizeof(struct tx_desc) * MAX_TX_RING_ENTRIES); + pci_free_consistent(ap->pdev, size, ap->tx_ring, + ap->tx_ring_dma); + } + ap->tx_ring = NULL; + + if (ap->evt_prd != NULL) { + pci_free_consistent(ap->pdev, sizeof(u32), + (void *)ap->evt_prd, ap->evt_prd_dma); + ap->evt_prd = NULL; + } + if (ap->rx_ret_prd != NULL) { + pci_free_consistent(ap->pdev, sizeof(u32), + (void *)ap->rx_ret_prd, + ap->rx_ret_prd_dma); + ap->rx_ret_prd = NULL; + } + if (ap->tx_csm != NULL) { + pci_free_consistent(ap->pdev, sizeof(u32), + (void *)ap->tx_csm, ap->tx_csm_dma); + ap->tx_csm = NULL; + } +} + + +static int ace_allocate_descriptors(struct net_device *dev) +{ + struct ace_private *ap = netdev_priv(dev); + int size; + + size = (sizeof(struct rx_desc) * + (RX_STD_RING_ENTRIES + + RX_JUMBO_RING_ENTRIES + + RX_MINI_RING_ENTRIES + + RX_RETURN_RING_ENTRIES)); + + ap->rx_std_ring = pci_alloc_consistent(ap->pdev, size, + &ap->rx_ring_base_dma); + if (ap->rx_std_ring == NULL) + goto fail; + + ap->rx_jumbo_ring = ap->rx_std_ring + RX_STD_RING_ENTRIES; + ap->rx_mini_ring = ap->rx_jumbo_ring + RX_JUMBO_RING_ENTRIES; + ap->rx_return_ring = ap->rx_mini_ring + RX_MINI_RING_ENTRIES; + + size = (sizeof(struct event) * EVT_RING_ENTRIES); + + ap->evt_ring = pci_alloc_consistent(ap->pdev, size, &ap->evt_ring_dma); + + if (ap->evt_ring == NULL) + goto fail; + + /* + * Only allocate a host TX ring for the Tigon II, the Tigon I + * has to use PCI registers for this ;-( + */ + if (!ACE_IS_TIGON_I(ap)) { + size = (sizeof(struct tx_desc) * MAX_TX_RING_ENTRIES); + + ap->tx_ring = pci_alloc_consistent(ap->pdev, size, + &ap->tx_ring_dma); + + if (ap->tx_ring == NULL) + goto fail; + } + + ap->evt_prd = pci_alloc_consistent(ap->pdev, sizeof(u32), + &ap->evt_prd_dma); + if (ap->evt_prd == NULL) + goto fail; + + ap->rx_ret_prd = pci_alloc_consistent(ap->pdev, sizeof(u32), + &ap->rx_ret_prd_dma); + if (ap->rx_ret_prd == NULL) + goto fail; + + ap->tx_csm = pci_alloc_consistent(ap->pdev, sizeof(u32), + &ap->tx_csm_dma); + if (ap->tx_csm == NULL) + goto fail; + + return 0; + +fail: + /* Clean up. */ + ace_init_cleanup(dev); + return 1; +} + + +/* + * Generic cleanup handling data allocated during init. Used when the + * module is unloaded or if an error occurs during initialization + */ +static void ace_init_cleanup(struct net_device *dev) +{ + struct ace_private *ap; + + ap = netdev_priv(dev); + + ace_free_descriptors(dev); + + if (ap->info) + pci_free_consistent(ap->pdev, sizeof(struct ace_info), + ap->info, ap->info_dma); + if (ap->skb) + kfree(ap->skb); + if (ap->trace_buf) + kfree(ap->trace_buf); + + if (dev->irq) + free_irq(dev->irq, dev); + + iounmap(ap->regs); +} + + +/* + * Commands are considered to be slow. + */ +static inline void ace_issue_cmd(struct ace_regs __iomem *regs, struct cmd *cmd) +{ + u32 idx; + + idx = readl(®s->CmdPrd); + + writel(*(u32 *)(cmd), ®s->CmdRng[idx]); + idx = (idx + 1) % CMD_RING_ENTRIES; + + writel(idx, ®s->CmdPrd); +} + + +static int __devinit ace_init(struct net_device *dev) +{ + struct ace_private *ap; + struct ace_regs __iomem *regs; + struct ace_info *info = NULL; + struct pci_dev *pdev; + unsigned long myjif; + u64 tmp_ptr; + u32 tig_ver, mac1, mac2, tmp, pci_state; + int board_idx, ecode = 0; + short i; + unsigned char cache_size; + + ap = netdev_priv(dev); + regs = ap->regs; + + board_idx = ap->board_idx; + + /* + * aman@sgi.com - its useful to do a NIC reset here to + * address the `Firmware not running' problem subsequent + * to any crashes involving the NIC + */ + writel(HW_RESET | (HW_RESET << 24), ®s->HostCtrl); + readl(®s->HostCtrl); /* PCI write posting */ + udelay(5); + + /* + * Don't access any other registers before this point! + */ +#ifdef __BIG_ENDIAN + /* + * This will most likely need BYTE_SWAP once we switch + * to using __raw_writel() + */ + writel((WORD_SWAP | CLR_INT | ((WORD_SWAP | CLR_INT) << 24)), + ®s->HostCtrl); +#else + writel((CLR_INT | WORD_SWAP | ((CLR_INT | WORD_SWAP) << 24)), + ®s->HostCtrl); +#endif + readl(®s->HostCtrl); /* PCI write posting */ + + /* + * Stop the NIC CPU and clear pending interrupts + */ + writel(readl(®s->CpuCtrl) | CPU_HALT, ®s->CpuCtrl); + readl(®s->CpuCtrl); /* PCI write posting */ + writel(0, ®s->Mb0Lo); + + tig_ver = readl(®s->HostCtrl) >> 28; + + switch(tig_ver){ +#ifndef CONFIG_ACENIC_OMIT_TIGON_I + case 4: + case 5: + printk(KERN_INFO " Tigon I (Rev. %i), Firmware: %i.%i.%i, ", + tig_ver, tigonFwReleaseMajor, tigonFwReleaseMinor, + tigonFwReleaseFix); + writel(0, ®s->LocalCtrl); + ap->version = 1; + ap->tx_ring_entries = TIGON_I_TX_RING_ENTRIES; + break; +#endif + case 6: + printk(KERN_INFO " Tigon II (Rev. %i), Firmware: %i.%i.%i, ", + tig_ver, tigon2FwReleaseMajor, tigon2FwReleaseMinor, + tigon2FwReleaseFix); + writel(readl(®s->CpuBCtrl) | CPU_HALT, ®s->CpuBCtrl); + readl(®s->CpuBCtrl); /* PCI write posting */ + /* + * The SRAM bank size does _not_ indicate the amount + * of memory on the card, it controls the _bank_ size! + * Ie. a 1MB AceNIC will have two banks of 512KB. + */ + writel(SRAM_BANK_512K, ®s->LocalCtrl); + writel(SYNC_SRAM_TIMING, ®s->MiscCfg); + ap->version = 2; + ap->tx_ring_entries = MAX_TX_RING_ENTRIES; + break; + default: + printk(KERN_WARNING " Unsupported Tigon version detected " + "(%i)\n", tig_ver); + ecode = -ENODEV; + goto init_error; + } + + /* + * ModeStat _must_ be set after the SRAM settings as this change + * seems to corrupt the ModeStat and possible other registers. + * The SRAM settings survive resets and setting it to the same + * value a second time works as well. This is what caused the + * `Firmware not running' problem on the Tigon II. + */ +#ifdef __BIG_ENDIAN + writel(ACE_BYTE_SWAP_DMA | ACE_WARN | ACE_FATAL | ACE_BYTE_SWAP_BD | + ACE_WORD_SWAP_BD | ACE_NO_JUMBO_FRAG, ®s->ModeStat); +#else + writel(ACE_BYTE_SWAP_DMA | ACE_WARN | ACE_FATAL | + ACE_WORD_SWAP_BD | ACE_NO_JUMBO_FRAG, ®s->ModeStat); +#endif + readl(®s->ModeStat); /* PCI write posting */ + + mac1 = 0; + for(i = 0; i < 4; i++) { + mac1 = mac1 << 8; + tmp = read_eeprom_byte(dev, 0x8c+i); + if (tmp < 0) { + ecode = -EIO; + goto init_error; + } else + mac1 |= (tmp & 0xff); + } + mac2 = 0; + for(i = 4; i < 8; i++) { + mac2 = mac2 << 8; + tmp = read_eeprom_byte(dev, 0x8c+i); + if (tmp < 0) { + ecode = -EIO; + goto init_error; + } else + mac2 |= (tmp & 0xff); + } + + writel(mac1, ®s->MacAddrHi); + writel(mac2, ®s->MacAddrLo); + + printk("MAC: %02x:%02x:%02x:%02x:%02x:%02x\n", + (mac1 >> 8) & 0xff, mac1 & 0xff, (mac2 >> 24) &0xff, + (mac2 >> 16) & 0xff, (mac2 >> 8) & 0xff, mac2 & 0xff); + + dev->dev_addr[0] = (mac1 >> 8) & 0xff; + dev->dev_addr[1] = mac1 & 0xff; + dev->dev_addr[2] = (mac2 >> 24) & 0xff; + dev->dev_addr[3] = (mac2 >> 16) & 0xff; + dev->dev_addr[4] = (mac2 >> 8) & 0xff; + dev->dev_addr[5] = mac2 & 0xff; + + /* + * Looks like this is necessary to deal with on all architectures, + * even this %$#%$# N440BX Intel based thing doesn't get it right. + * Ie. having two NICs in the machine, one will have the cache + * line set at boot time, the other will not. + */ + pdev = ap->pdev; + pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cache_size); + cache_size <<= 2; + if (cache_size != SMP_CACHE_BYTES) { + printk(KERN_INFO " PCI cache line size set incorrectly " + "(%i bytes) by BIOS/FW, ", cache_size); + if (cache_size > SMP_CACHE_BYTES) + printk("expecting %i\n", SMP_CACHE_BYTES); + else { + printk("correcting to %i\n", SMP_CACHE_BYTES); + pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, + SMP_CACHE_BYTES >> 2); + } + } + + pci_state = readl(®s->PciState); + printk(KERN_INFO " PCI bus width: %i bits, speed: %iMHz, " + "latency: %i clks\n", + (pci_state & PCI_32BIT) ? 32 : 64, + (pci_state & PCI_66MHZ) ? 66 : 33, + ap->pci_latency); + + /* + * Set the max DMA transfer size. Seems that for most systems + * the performance is better when no MAX parameter is + * set. However for systems enabling PCI write and invalidate, + * DMA writes must be set to the L1 cache line size to get + * optimal performance. + * + * The default is now to turn the PCI write and invalidate off + * - that is what Alteon does for NT. + */ + tmp = READ_CMD_MEM | WRITE_CMD_MEM; + if (ap->version >= 2) { + tmp |= (MEM_READ_MULTIPLE | (pci_state & PCI_66MHZ)); + /* + * Tuning parameters only supported for 8 cards + */ + if (board_idx == BOARD_IDX_OVERFLOW || + dis_pci_mem_inval[board_idx]) { + if (ap->pci_command & PCI_COMMAND_INVALIDATE) { + ap->pci_command &= ~PCI_COMMAND_INVALIDATE; + pci_write_config_word(pdev, PCI_COMMAND, + ap->pci_command); + printk(KERN_INFO " Disabling PCI memory " + "write and invalidate\n"); + } + } else if (ap->pci_command & PCI_COMMAND_INVALIDATE) { + printk(KERN_INFO " PCI memory write & invalidate " + "enabled by BIOS, enabling counter measures\n"); + + switch(SMP_CACHE_BYTES) { + case 16: + tmp |= DMA_WRITE_MAX_16; + break; + case 32: + tmp |= DMA_WRITE_MAX_32; + break; + case 64: + tmp |= DMA_WRITE_MAX_64; + break; + case 128: + tmp |= DMA_WRITE_MAX_128; + break; + default: + printk(KERN_INFO " Cache line size %i not " + "supported, PCI write and invalidate " + "disabled\n", SMP_CACHE_BYTES); + ap->pci_command &= ~PCI_COMMAND_INVALIDATE; + pci_write_config_word(pdev, PCI_COMMAND, + ap->pci_command); + } + } + } + +#ifdef __sparc__ + /* + * On this platform, we know what the best dma settings + * are. We use 64-byte maximum bursts, because if we + * burst larger than the cache line size (or even cross + * a 64byte boundary in a single burst) the UltraSparc + * PCI controller will disconnect at 64-byte multiples. + * + * Read-multiple will be properly enabled above, and when + * set will give the PCI controller proper hints about + * prefetching. + */ + tmp &= ~DMA_READ_WRITE_MASK; + tmp |= DMA_READ_MAX_64; + tmp |= DMA_WRITE_MAX_64; +#endif +#ifdef __alpha__ + tmp &= ~DMA_READ_WRITE_MASK; + tmp |= DMA_READ_MAX_128; + /* + * All the docs say MUST NOT. Well, I did. + * Nothing terrible happens, if we load wrong size. + * Bit w&i still works better! + */ + tmp |= DMA_WRITE_MAX_128; +#endif + writel(tmp, ®s->PciState); + +#if 0 + /* + * The Host PCI bus controller driver has to set FBB. + * If all devices on that PCI bus support FBB, then the controller + * can enable FBB support in the Host PCI Bus controller (or on + * the PCI-PCI bridge if that applies). + * -ggg + */ + /* + * I have received reports from people having problems when this + * bit is enabled. + */ + if (!(ap->pci_command & PCI_COMMAND_FAST_BACK)) { + printk(KERN_INFO " Enabling PCI Fast Back to Back\n"); + ap->pci_command |= PCI_COMMAND_FAST_BACK; + pci_write_config_word(pdev, PCI_COMMAND, ap->pci_command); + } +#endif + + /* + * Configure DMA attributes. + */ + if (!pci_set_dma_mask(pdev, 0xffffffffffffffffULL)) { + ap->pci_using_dac = 1; + } else if (!pci_set_dma_mask(pdev, 0xffffffffULL)) { + ap->pci_using_dac = 0; + } else { + ecode = -ENODEV; + goto init_error; + } + + /* + * Initialize the generic info block and the command+event rings + * and the control blocks for the transmit and receive rings + * as they need to be setup once and for all. + */ + if (!(info = pci_alloc_consistent(ap->pdev, sizeof(struct ace_info), + &ap->info_dma))) { + ecode = -EAGAIN; + goto init_error; + } + ap->info = info; + + /* + * Get the memory for the skb rings. + */ + if (!(ap->skb = kmalloc(sizeof(struct ace_skb), GFP_KERNEL))) { + ecode = -EAGAIN; + goto init_error; + } + + ecode = request_irq(pdev->irq, ace_interrupt, SA_SHIRQ, + DRV_NAME, dev); + if (ecode) { + printk(KERN_WARNING "%s: Requested IRQ %d is busy\n", + DRV_NAME, pdev->irq); + goto init_error; + } else + dev->irq = pdev->irq; + +#ifdef INDEX_DEBUG + spin_lock_init(&ap->debug_lock); + ap->last_tx = ACE_TX_RING_ENTRIES(ap) - 1; + ap->last_std_rx = 0; + ap->last_mini_rx = 0; +#endif + + memset(ap->info, 0, sizeof(struct ace_info)); + memset(ap->skb, 0, sizeof(struct ace_skb)); + + ace_load_firmware(dev); + ap->fw_running = 0; + + tmp_ptr = ap->info_dma; + writel(tmp_ptr >> 32, ®s->InfoPtrHi); + writel(tmp_ptr & 0xffffffff, ®s->InfoPtrLo); + + memset(ap->evt_ring, 0, EVT_RING_ENTRIES * sizeof(struct event)); + + set_aceaddr(&info->evt_ctrl.rngptr, ap->evt_ring_dma); + info->evt_ctrl.flags = 0; + + *(ap->evt_prd) = 0; + wmb(); + set_aceaddr(&info->evt_prd_ptr, ap->evt_prd_dma); + writel(0, ®s->EvtCsm); + + set_aceaddr(&info->cmd_ctrl.rngptr, 0x100); + info->cmd_ctrl.flags = 0; + info->cmd_ctrl.max_len = 0; + + for (i = 0; i < CMD_RING_ENTRIES; i++) + writel(0, ®s->CmdRng[i]); + + writel(0, ®s->CmdPrd); + writel(0, ®s->CmdCsm); + + tmp_ptr = ap->info_dma; + tmp_ptr += (unsigned long) &(((struct ace_info *)0)->s.stats); + set_aceaddr(&info->stats2_ptr, (dma_addr_t) tmp_ptr); + + set_aceaddr(&info->rx_std_ctrl.rngptr, ap->rx_ring_base_dma); + info->rx_std_ctrl.max_len = ACE_STD_BUFSIZE; + info->rx_std_ctrl.flags = + RCB_FLG_TCP_UDP_SUM | RCB_FLG_NO_PSEUDO_HDR | ACE_RCB_VLAN_FLAG; + + memset(ap->rx_std_ring, 0, + RX_STD_RING_ENTRIES * sizeof(struct rx_desc)); + + for (i = 0; i < RX_STD_RING_ENTRIES; i++) + ap->rx_std_ring[i].flags = BD_FLG_TCP_UDP_SUM; + + ap->rx_std_skbprd = 0; + atomic_set(&ap->cur_rx_bufs, 0); + + set_aceaddr(&info->rx_jumbo_ctrl.rngptr, + (ap->rx_ring_base_dma + + (sizeof(struct rx_desc) * RX_STD_RING_ENTRIES))); + info->rx_jumbo_ctrl.max_len = 0; + info->rx_jumbo_ctrl.flags = + RCB_FLG_TCP_UDP_SUM | RCB_FLG_NO_PSEUDO_HDR | ACE_RCB_VLAN_FLAG; + + memset(ap->rx_jumbo_ring, 0, + RX_JUMBO_RING_ENTRIES * sizeof(struct rx_desc)); + + for (i = 0; i < RX_JUMBO_RING_ENTRIES; i++) + ap->rx_jumbo_ring[i].flags = BD_FLG_TCP_UDP_SUM | BD_FLG_JUMBO; + + ap->rx_jumbo_skbprd = 0; + atomic_set(&ap->cur_jumbo_bufs, 0); + + memset(ap->rx_mini_ring, 0, + RX_MINI_RING_ENTRIES * sizeof(struct rx_desc)); + + if (ap->version >= 2) { + set_aceaddr(&info->rx_mini_ctrl.rngptr, + (ap->rx_ring_base_dma + + (sizeof(struct rx_desc) * + (RX_STD_RING_ENTRIES + + RX_JUMBO_RING_ENTRIES)))); + info->rx_mini_ctrl.max_len = ACE_MINI_SIZE; + info->rx_mini_ctrl.flags = + RCB_FLG_TCP_UDP_SUM|RCB_FLG_NO_PSEUDO_HDR|ACE_RCB_VLAN_FLAG; + + for (i = 0; i < RX_MINI_RING_ENTRIES; i++) + ap->rx_mini_ring[i].flags = + BD_FLG_TCP_UDP_SUM | BD_FLG_MINI; + } else { + set_aceaddr(&info->rx_mini_ctrl.rngptr, 0); + info->rx_mini_ctrl.flags = RCB_FLG_RNG_DISABLE; + info->rx_mini_ctrl.max_len = 0; + } + + ap->rx_mini_skbprd = 0; + atomic_set(&ap->cur_mini_bufs, 0); + + set_aceaddr(&info->rx_return_ctrl.rngptr, + (ap->rx_ring_base_dma + + (sizeof(struct rx_desc) * + (RX_STD_RING_ENTRIES + + RX_JUMBO_RING_ENTRIES + + RX_MINI_RING_ENTRIES)))); + info->rx_return_ctrl.flags = 0; + info->rx_return_ctrl.max_len = RX_RETURN_RING_ENTRIES; + + memset(ap->rx_return_ring, 0, + RX_RETURN_RING_ENTRIES * sizeof(struct rx_desc)); + + set_aceaddr(&info->rx_ret_prd_ptr, ap->rx_ret_prd_dma); + *(ap->rx_ret_prd) = 0; + + writel(TX_RING_BASE, ®s->WinBase); + + if (ACE_IS_TIGON_I(ap)) { + ap->tx_ring = (struct tx_desc *) regs->Window; + for (i = 0; i < (TIGON_I_TX_RING_ENTRIES + * sizeof(struct tx_desc)) / sizeof(u32); i++) + writel(0, (void __iomem *)ap->tx_ring + i * 4); + + set_aceaddr(&info->tx_ctrl.rngptr, TX_RING_BASE); + } else { + memset(ap->tx_ring, 0, + MAX_TX_RING_ENTRIES * sizeof(struct tx_desc)); + + set_aceaddr(&info->tx_ctrl.rngptr, ap->tx_ring_dma); + } + + info->tx_ctrl.max_len = ACE_TX_RING_ENTRIES(ap); + tmp = RCB_FLG_TCP_UDP_SUM | RCB_FLG_NO_PSEUDO_HDR | ACE_RCB_VLAN_FLAG; + + /* + * The Tigon I does not like having the TX ring in host memory ;-( + */ + if (!ACE_IS_TIGON_I(ap)) + tmp |= RCB_FLG_TX_HOST_RING; +#if TX_COAL_INTS_ONLY + tmp |= RCB_FLG_COAL_INT_ONLY; +#endif + info->tx_ctrl.flags = tmp; + + set_aceaddr(&info->tx_csm_ptr, ap->tx_csm_dma); + + /* + * Potential item for tuning parameter + */ +#if 0 /* NO */ + writel(DMA_THRESH_16W, ®s->DmaReadCfg); + writel(DMA_THRESH_16W, ®s->DmaWriteCfg); +#else + writel(DMA_THRESH_8W, ®s->DmaReadCfg); + writel(DMA_THRESH_8W, ®s->DmaWriteCfg); +#endif + + writel(0, ®s->MaskInt); + writel(1, ®s->IfIdx); +#if 0 + /* + * McKinley boxes do not like us fiddling with AssistState + * this early + */ + writel(1, ®s->AssistState); +#endif + + writel(DEF_STAT, ®s->TuneStatTicks); + writel(DEF_TRACE, ®s->TuneTrace); + + ace_set_rxtx_parms(dev, 0); + + if (board_idx == BOARD_IDX_OVERFLOW) { + printk(KERN_WARNING "%s: more than %i NICs detected, " + "ignoring module parameters!\n", + ap->name, ACE_MAX_MOD_PARMS); + } else if (board_idx >= 0) { + if (tx_coal_tick[board_idx]) + writel(tx_coal_tick[board_idx], + ®s->TuneTxCoalTicks); + if (max_tx_desc[board_idx]) + writel(max_tx_desc[board_idx], ®s->TuneMaxTxDesc); + + if (rx_coal_tick[board_idx]) + writel(rx_coal_tick[board_idx], + ®s->TuneRxCoalTicks); + if (max_rx_desc[board_idx]) + writel(max_rx_desc[board_idx], ®s->TuneMaxRxDesc); + + if (trace[board_idx]) + writel(trace[board_idx], ®s->TuneTrace); + + if ((tx_ratio[board_idx] > 0) && (tx_ratio[board_idx] < 64)) + writel(tx_ratio[board_idx], ®s->TxBufRat); + } + + /* + * Default link parameters + */ + tmp = LNK_ENABLE | LNK_FULL_DUPLEX | LNK_1000MB | LNK_100MB | + LNK_10MB | LNK_RX_FLOW_CTL_Y | LNK_NEG_FCTL | LNK_NEGOTIATE; + if(ap->version >= 2) + tmp |= LNK_TX_FLOW_CTL_Y; + + /* + * Override link default parameters + */ + if ((board_idx >= 0) && link[board_idx]) { + int option = link[board_idx]; + + tmp = LNK_ENABLE; + + if (option & 0x01) { + printk(KERN_INFO "%s: Setting half duplex link\n", + ap->name); + tmp &= ~LNK_FULL_DUPLEX; + } + if (option & 0x02) + tmp &= ~LNK_NEGOTIATE; + if (option & 0x10) + tmp |= LNK_10MB; + if (option & 0x20) + tmp |= LNK_100MB; + if (option & 0x40) + tmp |= LNK_1000MB; + if ((option & 0x70) == 0) { + printk(KERN_WARNING "%s: No media speed specified, " + "forcing auto negotiation\n", ap->name); + tmp |= LNK_NEGOTIATE | LNK_1000MB | + LNK_100MB | LNK_10MB; + } + if ((option & 0x100) == 0) + tmp |= LNK_NEG_FCTL; + else + printk(KERN_INFO "%s: Disabling flow control " + "negotiation\n", ap->name); + if (option & 0x200) + tmp |= LNK_RX_FLOW_CTL_Y; + if ((option & 0x400) && (ap->version >= 2)) { + printk(KERN_INFO "%s: Enabling TX flow control\n", + ap->name); + tmp |= LNK_TX_FLOW_CTL_Y; + } + } + + ap->link = tmp; + writel(tmp, ®s->TuneLink); + if (ap->version >= 2) + writel(tmp, ®s->TuneFastLink); + + if (ACE_IS_TIGON_I(ap)) + writel(tigonFwStartAddr, ®s->Pc); + if (ap->version == 2) + writel(tigon2FwStartAddr, ®s->Pc); + + writel(0, ®s->Mb0Lo); + + /* + * Set tx_csm before we start receiving interrupts, otherwise + * the interrupt handler might think it is supposed to process + * tx ints before we are up and running, which may cause a null + * pointer access in the int handler. + */ + ap->cur_rx = 0; + ap->tx_prd = *(ap->tx_csm) = ap->tx_ret_csm = 0; + + wmb(); + ace_set_txprd(regs, ap, 0); + writel(0, ®s->RxRetCsm); + + /* + * Zero the stats before starting the interface + */ + memset(&ap->stats, 0, sizeof(ap->stats)); + + /* + * Enable DMA engine now. + * If we do this sooner, Mckinley box pukes. + * I assume it's because Tigon II DMA engine wants to check + * *something* even before the CPU is started. + */ + writel(1, ®s->AssistState); /* enable DMA */ + + /* + * Start the NIC CPU + */ + writel(readl(®s->CpuCtrl) & ~(CPU_HALT|CPU_TRACE), ®s->CpuCtrl); + readl(®s->CpuCtrl); + + /* + * Wait for the firmware to spin up - max 3 seconds. + */ + myjif = jiffies + 3 * HZ; + while (time_before(jiffies, myjif) && !ap->fw_running) + cpu_relax(); + + if (!ap->fw_running) { + printk(KERN_ERR "%s: Firmware NOT running!\n", ap->name); + + ace_dump_trace(ap); + writel(readl(®s->CpuCtrl) | CPU_HALT, ®s->CpuCtrl); + readl(®s->CpuCtrl); + + /* aman@sgi.com - account for badly behaving firmware/NIC: + * - have observed that the NIC may continue to generate + * interrupts for some reason; attempt to stop it - halt + * second CPU for Tigon II cards, and also clear Mb0 + * - if we're a module, we'll fail to load if this was + * the only GbE card in the system => if the kernel does + * see an interrupt from the NIC, code to handle it is + * gone and OOps! - so free_irq also + */ + if (ap->version >= 2) + writel(readl(®s->CpuBCtrl) | CPU_HALT, + ®s->CpuBCtrl); + writel(0, ®s->Mb0Lo); + readl(®s->Mb0Lo); + + ecode = -EBUSY; + goto init_error; + } + + /* + * We load the ring here as there seem to be no way to tell the + * firmware to wipe the ring without re-initializing it. + */ + if (!test_and_set_bit(0, &ap->std_refill_busy)) + ace_load_std_rx_ring(ap, RX_RING_SIZE); + else + printk(KERN_ERR "%s: Someone is busy refilling the RX ring\n", + ap->name); + if (ap->version >= 2) { + if (!test_and_set_bit(0, &ap->mini_refill_busy)) + ace_load_mini_rx_ring(ap, RX_MINI_SIZE); + else + printk(KERN_ERR "%s: Someone is busy refilling " + "the RX mini ring\n", ap->name); + } + return 0; + + init_error: + ace_init_cleanup(dev); + return ecode; +} + + +static void ace_set_rxtx_parms(struct net_device *dev, int jumbo) +{ + struct ace_private *ap = netdev_priv(dev); + struct ace_regs __iomem *regs = ap->regs; + int board_idx = ap->board_idx; + + if (board_idx >= 0) { + if (!jumbo) { + if (!tx_coal_tick[board_idx]) + writel(DEF_TX_COAL, ®s->TuneTxCoalTicks); + if (!max_tx_desc[board_idx]) + writel(DEF_TX_MAX_DESC, ®s->TuneMaxTxDesc); + if (!rx_coal_tick[board_idx]) + writel(DEF_RX_COAL, ®s->TuneRxCoalTicks); + if (!max_rx_desc[board_idx]) + writel(DEF_RX_MAX_DESC, ®s->TuneMaxRxDesc); + if (!tx_ratio[board_idx]) + writel(DEF_TX_RATIO, ®s->TxBufRat); + } else { + if (!tx_coal_tick[board_idx]) + writel(DEF_JUMBO_TX_COAL, + ®s->TuneTxCoalTicks); + if (!max_tx_desc[board_idx]) + writel(DEF_JUMBO_TX_MAX_DESC, + ®s->TuneMaxTxDesc); + if (!rx_coal_tick[board_idx]) + writel(DEF_JUMBO_RX_COAL, + ®s->TuneRxCoalTicks); + if (!max_rx_desc[board_idx]) + writel(DEF_JUMBO_RX_MAX_DESC, + ®s->TuneMaxRxDesc); + if (!tx_ratio[board_idx]) + writel(DEF_JUMBO_TX_RATIO, ®s->TxBufRat); + } + } +} + + +static void ace_watchdog(struct net_device *data) +{ + struct net_device *dev = data; + struct ace_private *ap = netdev_priv(dev); + struct ace_regs __iomem *regs = ap->regs; + + /* + * We haven't received a stats update event for more than 2.5 + * seconds and there is data in the transmit queue, thus we + * asume the card is stuck. + */ + if (*ap->tx_csm != ap->tx_ret_csm) { + printk(KERN_WARNING "%s: Transmitter is stuck, %08x\n", + dev->name, (unsigned int)readl(®s->HostCtrl)); + /* This can happen due to ieee flow control. */ + } else { + printk(KERN_DEBUG "%s: BUG... transmitter died. Kicking it.\n", + dev->name); +#if 0 + netif_wake_queue(dev); +#endif + } +} + + +static void ace_tasklet(unsigned long dev) +{ + struct ace_private *ap = netdev_priv((struct net_device *)dev); + int cur_size; + + cur_size = atomic_read(&ap->cur_rx_bufs); + if ((cur_size < RX_LOW_STD_THRES) && + !test_and_set_bit(0, &ap->std_refill_busy)) { +#ifdef DEBUG + printk("refilling buffers (current %i)\n", cur_size); +#endif + ace_load_std_rx_ring(ap, RX_RING_SIZE - cur_size); + } + + if (ap->version >= 2) { + cur_size = atomic_read(&ap->cur_mini_bufs); + if ((cur_size < RX_LOW_MINI_THRES) && + !test_and_set_bit(0, &ap->mini_refill_busy)) { +#ifdef DEBUG + printk("refilling mini buffers (current %i)\n", + cur_size); +#endif + ace_load_mini_rx_ring(ap, RX_MINI_SIZE - cur_size); + } + } + + cur_size = atomic_read(&ap->cur_jumbo_bufs); + if (ap->jumbo && (cur_size < RX_LOW_JUMBO_THRES) && + !test_and_set_bit(0, &ap->jumbo_refill_busy)) { +#ifdef DEBUG + printk("refilling jumbo buffers (current %i)\n", cur_size); +#endif + ace_load_jumbo_rx_ring(ap, RX_JUMBO_SIZE - cur_size); + } + ap->tasklet_pending = 0; +} + + +/* + * Copy the contents of the NIC's trace buffer to kernel memory. + */ +static void ace_dump_trace(struct ace_private *ap) +{ +#if 0 + if (!ap->trace_buf) + if (!(ap->trace_buf = kmalloc(ACE_TRACE_SIZE, GFP_KERNEL))) + return; +#endif +} + + +/* + * Load the standard rx ring. + * + * Loading rings is safe without holding the spin lock since this is + * done only before the device is enabled, thus no interrupts are + * generated and by the interrupt handler/tasklet handler. + */ +static void ace_load_std_rx_ring(struct ace_private *ap, int nr_bufs) +{ + struct ace_regs __iomem *regs = ap->regs; + short i, idx; + + + prefetchw(&ap->cur_rx_bufs); + + idx = ap->rx_std_skbprd; + + for (i = 0; i < nr_bufs; i++) { + struct sk_buff *skb; + struct rx_desc *rd; + dma_addr_t mapping; + + skb = alloc_skb(ACE_STD_BUFSIZE + NET_IP_ALIGN, GFP_ATOMIC); + if (!skb) + break; + + skb_reserve(skb, NET_IP_ALIGN); + mapping = pci_map_page(ap->pdev, virt_to_page(skb->data), + offset_in_page(skb->data), + ACE_STD_BUFSIZE, + PCI_DMA_FROMDEVICE); + ap->skb->rx_std_skbuff[idx].skb = skb; + pci_unmap_addr_set(&ap->skb->rx_std_skbuff[idx], + mapping, mapping); + + rd = &ap->rx_std_ring[idx]; + set_aceaddr(&rd->addr, mapping); + rd->size = ACE_STD_BUFSIZE; + rd->idx = idx; + idx = (idx + 1) % RX_STD_RING_ENTRIES; + } + + if (!i) + goto error_out; + + atomic_add(i, &ap->cur_rx_bufs); + ap->rx_std_skbprd = idx; + + if (ACE_IS_TIGON_I(ap)) { + struct cmd cmd; + cmd.evt = C_SET_RX_PRD_IDX; + cmd.code = 0; + cmd.idx = ap->rx_std_skbprd; + ace_issue_cmd(regs, &cmd); + } else { + writel(idx, ®s->RxStdPrd); + wmb(); + } + + out: + clear_bit(0, &ap->std_refill_busy); + return; + + error_out: + printk(KERN_INFO "Out of memory when allocating " + "standard receive buffers\n"); + goto out; +} + + +static void ace_load_mini_rx_ring(struct ace_private *ap, int nr_bufs) +{ + struct ace_regs __iomem *regs = ap->regs; + short i, idx; + + prefetchw(&ap->cur_mini_bufs); + + idx = ap->rx_mini_skbprd; + for (i = 0; i < nr_bufs; i++) { + struct sk_buff *skb; + struct rx_desc *rd; + dma_addr_t mapping; + + skb = alloc_skb(ACE_MINI_BUFSIZE + NET_IP_ALIGN, GFP_ATOMIC); + if (!skb) + break; + + skb_reserve(skb, NET_IP_ALIGN); + mapping = pci_map_page(ap->pdev, virt_to_page(skb->data), + offset_in_page(skb->data), + ACE_MINI_BUFSIZE, + PCI_DMA_FROMDEVICE); + ap->skb->rx_mini_skbuff[idx].skb = skb; + pci_unmap_addr_set(&ap->skb->rx_mini_skbuff[idx], + mapping, mapping); + + rd = &ap->rx_mini_ring[idx]; + set_aceaddr(&rd->addr, mapping); + rd->size = ACE_MINI_BUFSIZE; + rd->idx = idx; + idx = (idx + 1) % RX_MINI_RING_ENTRIES; + } + + if (!i) + goto error_out; + + atomic_add(i, &ap->cur_mini_bufs); + + ap->rx_mini_skbprd = idx; + + writel(idx, ®s->RxMiniPrd); + wmb(); + + out: + clear_bit(0, &ap->mini_refill_busy); + return; + error_out: + printk(KERN_INFO "Out of memory when allocating " + "mini receive buffers\n"); + goto out; +} + + +/* + * Load the jumbo rx ring, this may happen at any time if the MTU + * is changed to a value > 1500. + */ +static void ace_load_jumbo_rx_ring(struct ace_private *ap, int nr_bufs) +{ + struct ace_regs __iomem *regs = ap->regs; + short i, idx; + + idx = ap->rx_jumbo_skbprd; + + for (i = 0; i < nr_bufs; i++) { + struct sk_buff *skb; + struct rx_desc *rd; + dma_addr_t mapping; + + skb = alloc_skb(ACE_JUMBO_BUFSIZE + NET_IP_ALIGN, GFP_ATOMIC); + if (!skb) + break; + + skb_reserve(skb, NET_IP_ALIGN); + mapping = pci_map_page(ap->pdev, virt_to_page(skb->data), + offset_in_page(skb->data), + ACE_JUMBO_BUFSIZE, + PCI_DMA_FROMDEVICE); + ap->skb->rx_jumbo_skbuff[idx].skb = skb; + pci_unmap_addr_set(&ap->skb->rx_jumbo_skbuff[idx], + mapping, mapping); + + rd = &ap->rx_jumbo_ring[idx]; + set_aceaddr(&rd->addr, mapping); + rd->size = ACE_JUMBO_BUFSIZE; + rd->idx = idx; + idx = (idx + 1) % RX_JUMBO_RING_ENTRIES; + } + + if (!i) + goto error_out; + + atomic_add(i, &ap->cur_jumbo_bufs); + ap->rx_jumbo_skbprd = idx; + + if (ACE_IS_TIGON_I(ap)) { + struct cmd cmd; + cmd.evt = C_SET_RX_JUMBO_PRD_IDX; + cmd.code = 0; + cmd.idx = ap->rx_jumbo_skbprd; + ace_issue_cmd(regs, &cmd); + } else { + writel(idx, ®s->RxJumboPrd); + wmb(); + } + + out: + clear_bit(0, &ap->jumbo_refill_busy); + return; + error_out: + if (net_ratelimit()) + printk(KERN_INFO "Out of memory when allocating " + "jumbo receive buffers\n"); + goto out; +} + + +/* + * All events are considered to be slow (RX/TX ints do not generate + * events) and are handled here, outside the main interrupt handler, + * to reduce the size of the handler. + */ +static u32 ace_handle_event(struct net_device *dev, u32 evtcsm, u32 evtprd) +{ + struct ace_private *ap; + + ap = netdev_priv(dev); + + while (evtcsm != evtprd) { + switch (ap->evt_ring[evtcsm].evt) { + case E_FW_RUNNING: + printk(KERN_INFO "%s: Firmware up and running\n", + ap->name); + ap->fw_running = 1; + wmb(); + break; + case E_STATS_UPDATED: + break; + case E_LNK_STATE: + { + u16 code = ap->evt_ring[evtcsm].code; + switch (code) { + case E_C_LINK_UP: + { + u32 state = readl(&ap->regs->GigLnkState); + printk(KERN_WARNING "%s: Optical link UP " + "(%s Duplex, Flow Control: %s%s)\n", + ap->name, + state & LNK_FULL_DUPLEX ? "Full":"Half", + state & LNK_TX_FLOW_CTL_Y ? "TX " : "", + state & LNK_RX_FLOW_CTL_Y ? "RX" : ""); + break; + } + case E_C_LINK_DOWN: + printk(KERN_WARNING "%s: Optical link DOWN\n", + ap->name); + break; + case E_C_LINK_10_100: + printk(KERN_WARNING "%s: 10/100BaseT link " + "UP\n", ap->name); + break; + default: + printk(KERN_ERR "%s: Unknown optical link " + "state %02x\n", ap->name, code); + } + break; + } + case E_ERROR: + switch(ap->evt_ring[evtcsm].code) { + case E_C_ERR_INVAL_CMD: + printk(KERN_ERR "%s: invalid command error\n", + ap->name); + break; + case E_C_ERR_UNIMP_CMD: + printk(KERN_ERR "%s: unimplemented command " + "error\n", ap->name); + break; + case E_C_ERR_BAD_CFG: + printk(KERN_ERR "%s: bad config error\n", + ap->name); + break; + default: + printk(KERN_ERR "%s: unknown error %02x\n", + ap->name, ap->evt_ring[evtcsm].code); + } + break; + case E_RESET_JUMBO_RNG: + { + int i; + for (i = 0; i < RX_JUMBO_RING_ENTRIES; i++) { + if (ap->skb->rx_jumbo_skbuff[i].skb) { + ap->rx_jumbo_ring[i].size = 0; + set_aceaddr(&ap->rx_jumbo_ring[i].addr, 0); + dev_kfree_skb(ap->skb->rx_jumbo_skbuff[i].skb); + ap->skb->rx_jumbo_skbuff[i].skb = NULL; + } + } + + if (ACE_IS_TIGON_I(ap)) { + struct cmd cmd; + cmd.evt = C_SET_RX_JUMBO_PRD_IDX; + cmd.code = 0; + cmd.idx = 0; + ace_issue_cmd(ap->regs, &cmd); + } else { + writel(0, &((ap->regs)->RxJumboPrd)); + wmb(); + } + + ap->jumbo = 0; + ap->rx_jumbo_skbprd = 0; + printk(KERN_INFO "%s: Jumbo ring flushed\n", + ap->name); + clear_bit(0, &ap->jumbo_refill_busy); + break; + } + default: + printk(KERN_ERR "%s: Unhandled event 0x%02x\n", + ap->name, ap->evt_ring[evtcsm].evt); + } + evtcsm = (evtcsm + 1) % EVT_RING_ENTRIES; + } + + return evtcsm; +} + + +static void ace_rx_int(struct net_device *dev, u32 rxretprd, u32 rxretcsm) +{ + struct ace_private *ap = netdev_priv(dev); + u32 idx; + int mini_count = 0, std_count = 0; + + idx = rxretcsm; + + prefetchw(&ap->cur_rx_bufs); + prefetchw(&ap->cur_mini_bufs); + + while (idx != rxretprd) { + struct ring_info *rip; + struct sk_buff *skb; + struct rx_desc *rxdesc, *retdesc; + u32 skbidx; + int bd_flags, desc_type, mapsize; + u16 csum; + + + /* make sure the rx descriptor isn't read before rxretprd */ + if (idx == rxretcsm) + rmb(); + + retdesc = &ap->rx_return_ring[idx]; + skbidx = retdesc->idx; + bd_flags = retdesc->flags; + desc_type = bd_flags & (BD_FLG_JUMBO | BD_FLG_MINI); + + switch(desc_type) { + /* + * Normal frames do not have any flags set + * + * Mini and normal frames arrive frequently, + * so use a local counter to avoid doing + * atomic operations for each packet arriving. + */ + case 0: + rip = &ap->skb->rx_std_skbuff[skbidx]; + mapsize = ACE_STD_BUFSIZE; + rxdesc = &ap->rx_std_ring[skbidx]; + std_count++; + break; + case BD_FLG_JUMBO: + rip = &ap->skb->rx_jumbo_skbuff[skbidx]; + mapsize = ACE_JUMBO_BUFSIZE; + rxdesc = &ap->rx_jumbo_ring[skbidx]; + atomic_dec(&ap->cur_jumbo_bufs); + break; + case BD_FLG_MINI: + rip = &ap->skb->rx_mini_skbuff[skbidx]; + mapsize = ACE_MINI_BUFSIZE; + rxdesc = &ap->rx_mini_ring[skbidx]; + mini_count++; + break; + default: + printk(KERN_INFO "%s: unknown frame type (0x%02x) " + "returned by NIC\n", dev->name, + retdesc->flags); + goto error; + } + + skb = rip->skb; + rip->skb = NULL; + pci_unmap_page(ap->pdev, + pci_unmap_addr(rip, mapping), + mapsize, + PCI_DMA_FROMDEVICE); + skb_put(skb, retdesc->size); + + /* + * Fly baby, fly! + */ + csum = retdesc->tcp_udp_csum; + + skb->dev = dev; + skb->protocol = eth_type_trans(skb, dev); + + /* + * Instead of forcing the poor tigon mips cpu to calculate + * pseudo hdr checksum, we do this ourselves. + */ + if (bd_flags & BD_FLG_TCP_UDP_SUM) { + skb->csum = htons(csum); + skb->ip_summed = CHECKSUM_HW; + } else { + skb->ip_summed = CHECKSUM_NONE; + } + + /* send it up */ +#if ACENIC_DO_VLAN + if (ap->vlgrp && (bd_flags & BD_FLG_VLAN_TAG)) { + vlan_hwaccel_rx(skb, ap->vlgrp, retdesc->vlan); + } else +#endif + netif_rx(skb); + + dev->last_rx = jiffies; + ap->stats.rx_packets++; + ap->stats.rx_bytes += retdesc->size; + + idx = (idx + 1) % RX_RETURN_RING_ENTRIES; + } + + atomic_sub(std_count, &ap->cur_rx_bufs); + if (!ACE_IS_TIGON_I(ap)) + atomic_sub(mini_count, &ap->cur_mini_bufs); + + out: + /* + * According to the documentation RxRetCsm is obsolete with + * the 12.3.x Firmware - my Tigon I NICs seem to disagree! + */ + if (ACE_IS_TIGON_I(ap)) { + writel(idx, &ap->regs->RxRetCsm); + } + ap->cur_rx = idx; + + return; + error: + idx = rxretprd; + goto out; +} + + +static inline void ace_tx_int(struct net_device *dev, + u32 txcsm, u32 idx) +{ + struct ace_private *ap = netdev_priv(dev); + + do { + struct sk_buff *skb; + dma_addr_t mapping; + struct tx_ring_info *info; + + info = ap->skb->tx_skbuff + idx; + skb = info->skb; + mapping = pci_unmap_addr(info, mapping); + + if (mapping) { + pci_unmap_page(ap->pdev, mapping, + pci_unmap_len(info, maplen), + PCI_DMA_TODEVICE); + pci_unmap_addr_set(info, mapping, 0); + } + + if (skb) { + ap->stats.tx_packets++; + ap->stats.tx_bytes += skb->len; + dev_kfree_skb_irq(skb); + info->skb = NULL; + } + + idx = (idx + 1) % ACE_TX_RING_ENTRIES(ap); + } while (idx != txcsm); + + if (netif_queue_stopped(dev)) + netif_wake_queue(dev); + + wmb(); + ap->tx_ret_csm = txcsm; + + /* So... tx_ret_csm is advanced _after_ check for device wakeup. + * + * We could try to make it before. In this case we would get + * the following race condition: hard_start_xmit on other cpu + * enters after we advanced tx_ret_csm and fills space, + * which we have just freed, so that we make illegal device wakeup. + * There is no good way to workaround this (at entry + * to ace_start_xmit detects this condition and prevents + * ring corruption, but it is not a good workaround.) + * + * When tx_ret_csm is advanced after, we wake up device _only_ + * if we really have some space in ring (though the core doing + * hard_start_xmit can see full ring for some period and has to + * synchronize.) Superb. + * BUT! We get another subtle race condition. hard_start_xmit + * may think that ring is full between wakeup and advancing + * tx_ret_csm and will stop device instantly! It is not so bad. + * We are guaranteed that there is something in ring, so that + * the next irq will resume transmission. To speedup this we could + * mark descriptor, which closes ring with BD_FLG_COAL_NOW + * (see ace_start_xmit). + * + * Well, this dilemma exists in all lock-free devices. + * We, following scheme used in drivers by Donald Becker, + * select the least dangerous. + * --ANK + */ +} + + +static irqreturn_t ace_interrupt(int irq, void *dev_id, struct pt_regs *ptregs) +{ + struct net_device *dev = (struct net_device *)dev_id; + struct ace_private *ap = netdev_priv(dev); + struct ace_regs __iomem *regs = ap->regs; + u32 idx; + u32 txcsm, rxretcsm, rxretprd; + u32 evtcsm, evtprd; + + /* + * In case of PCI shared interrupts or spurious interrupts, + * we want to make sure it is actually our interrupt before + * spending any time in here. + */ + if (!(readl(®s->HostCtrl) & IN_INT)) + return IRQ_NONE; + + /* + * ACK intr now. Otherwise we will lose updates to rx_ret_prd, + * which happened _after_ rxretprd = *ap->rx_ret_prd; but before + * writel(0, ®s->Mb0Lo). + * + * "IRQ avoidance" recommended in docs applies to IRQs served + * threads and it is wrong even for that case. + */ + writel(0, ®s->Mb0Lo); + readl(®s->Mb0Lo); + + /* + * There is no conflict between transmit handling in + * start_xmit and receive processing, thus there is no reason + * to take a spin lock for RX handling. Wait until we start + * working on the other stuff - hey we don't need a spin lock + * anymore. + */ + rxretprd = *ap->rx_ret_prd; + rxretcsm = ap->cur_rx; + + if (rxretprd != rxretcsm) + ace_rx_int(dev, rxretprd, rxretcsm); + + txcsm = *ap->tx_csm; + idx = ap->tx_ret_csm; + + if (txcsm != idx) { + /* + * If each skb takes only one descriptor this check degenerates + * to identity, because new space has just been opened. + * But if skbs are fragmented we must check that this index + * update releases enough of space, otherwise we just + * wait for device to make more work. + */ + if (!tx_ring_full(ap, txcsm, ap->tx_prd)) + ace_tx_int(dev, txcsm, idx); + } + + evtcsm = readl(®s->EvtCsm); + evtprd = *ap->evt_prd; + + if (evtcsm != evtprd) { + evtcsm = ace_handle_event(dev, evtcsm, evtprd); + writel(evtcsm, ®s->EvtCsm); + } + + /* + * This has to go last in the interrupt handler and run with + * the spin lock released ... what lock? + */ + if (netif_running(dev)) { + int cur_size; + int run_tasklet = 0; + + cur_size = atomic_read(&ap->cur_rx_bufs); + if (cur_size < RX_LOW_STD_THRES) { + if ((cur_size < RX_PANIC_STD_THRES) && + !test_and_set_bit(0, &ap->std_refill_busy)) { +#ifdef DEBUG + printk("low on std buffers %i\n", cur_size); +#endif + ace_load_std_rx_ring(ap, + RX_RING_SIZE - cur_size); + } else + run_tasklet = 1; + } + + if (!ACE_IS_TIGON_I(ap)) { + cur_size = atomic_read(&ap->cur_mini_bufs); + if (cur_size < RX_LOW_MINI_THRES) { + if ((cur_size < RX_PANIC_MINI_THRES) && + !test_and_set_bit(0, + &ap->mini_refill_busy)) { +#ifdef DEBUG + printk("low on mini buffers %i\n", + cur_size); +#endif + ace_load_mini_rx_ring(ap, RX_MINI_SIZE - cur_size); + } else + run_tasklet = 1; + } + } + + if (ap->jumbo) { + cur_size = atomic_read(&ap->cur_jumbo_bufs); + if (cur_size < RX_LOW_JUMBO_THRES) { + if ((cur_size < RX_PANIC_JUMBO_THRES) && + !test_and_set_bit(0, + &ap->jumbo_refill_busy)){ +#ifdef DEBUG + printk("low on jumbo buffers %i\n", + cur_size); +#endif + ace_load_jumbo_rx_ring(ap, RX_JUMBO_SIZE - cur_size); + } else + run_tasklet = 1; + } + } + if (run_tasklet && !ap->tasklet_pending) { + ap->tasklet_pending = 1; + tasklet_schedule(&ap->ace_tasklet); + } + } + + return IRQ_HANDLED; +} + + +#if ACENIC_DO_VLAN +static void ace_vlan_rx_register(struct net_device *dev, struct vlan_group *grp) +{ + struct ace_private *ap = netdev_priv(dev); + unsigned long flags; + + local_irq_save(flags); + ace_mask_irq(dev); + + ap->vlgrp = grp; + + ace_unmask_irq(dev); + local_irq_restore(flags); +} + + +static void ace_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) +{ + struct ace_private *ap = netdev_priv(dev); + unsigned long flags; + + local_irq_save(flags); + ace_mask_irq(dev); + + if (ap->vlgrp) + ap->vlgrp->vlan_devices[vid] = NULL; + + ace_unmask_irq(dev); + local_irq_restore(flags); +} +#endif /* ACENIC_DO_VLAN */ + + +static int ace_open(struct net_device *dev) +{ + struct ace_private *ap = netdev_priv(dev); + struct ace_regs __iomem *regs = ap->regs; + struct cmd cmd; + + if (!(ap->fw_running)) { + printk(KERN_WARNING "%s: Firmware not running!\n", dev->name); + return -EBUSY; + } + + writel(dev->mtu + ETH_HLEN + 4, ®s->IfMtu); + + cmd.evt = C_CLEAR_STATS; + cmd.code = 0; + cmd.idx = 0; + ace_issue_cmd(regs, &cmd); + + cmd.evt = C_HOST_STATE; + cmd.code = C_C_STACK_UP; + cmd.idx = 0; + ace_issue_cmd(regs, &cmd); + + if (ap->jumbo && + !test_and_set_bit(0, &ap->jumbo_refill_busy)) + ace_load_jumbo_rx_ring(ap, RX_JUMBO_SIZE); + + if (dev->flags & IFF_PROMISC) { + cmd.evt = C_SET_PROMISC_MODE; + cmd.code = C_C_PROMISC_ENABLE; + cmd.idx = 0; + ace_issue_cmd(regs, &cmd); + + ap->promisc = 1; + }else + ap->promisc = 0; + ap->mcast_all = 0; + +#if 0 + cmd.evt = C_LNK_NEGOTIATION; + cmd.code = 0; + cmd.idx = 0; + ace_issue_cmd(regs, &cmd); +#endif + + netif_start_queue(dev); + + /* + * Setup the bottom half rx ring refill handler + */ + tasklet_init(&ap->ace_tasklet, ace_tasklet, (unsigned long)dev); + return 0; +} + + +static int ace_close(struct net_device *dev) +{ + struct ace_private *ap = netdev_priv(dev); + struct ace_regs __iomem *regs = ap->regs; + struct cmd cmd; + unsigned long flags; + short i; + + /* + * Without (or before) releasing irq and stopping hardware, this + * is an absolute non-sense, by the way. It will be reset instantly + * by the first irq. + */ + netif_stop_queue(dev); + + + if (ap->promisc) { + cmd.evt = C_SET_PROMISC_MODE; + cmd.code = C_C_PROMISC_DISABLE; + cmd.idx = 0; + ace_issue_cmd(regs, &cmd); + ap->promisc = 0; + } + + cmd.evt = C_HOST_STATE; + cmd.code = C_C_STACK_DOWN; + cmd.idx = 0; + ace_issue_cmd(regs, &cmd); + + tasklet_kill(&ap->ace_tasklet); + + /* + * Make sure one CPU is not processing packets while + * buffers are being released by another. + */ + + local_irq_save(flags); + ace_mask_irq(dev); + + for (i = 0; i < ACE_TX_RING_ENTRIES(ap); i++) { + struct sk_buff *skb; + dma_addr_t mapping; + struct tx_ring_info *info; + + info = ap->skb->tx_skbuff + i; + skb = info->skb; + mapping = pci_unmap_addr(info, mapping); + + if (mapping) { + if (ACE_IS_TIGON_I(ap)) { + struct tx_desc __iomem *tx + = (struct tx_desc __iomem *) &ap->tx_ring[i]; + writel(0, &tx->addr.addrhi); + writel(0, &tx->addr.addrlo); + writel(0, &tx->flagsize); + } else + memset(ap->tx_ring + i, 0, + sizeof(struct tx_desc)); + pci_unmap_page(ap->pdev, mapping, + pci_unmap_len(info, maplen), + PCI_DMA_TODEVICE); + pci_unmap_addr_set(info, mapping, 0); + } + if (skb) { + dev_kfree_skb(skb); + info->skb = NULL; + } + } + + if (ap->jumbo) { + cmd.evt = C_RESET_JUMBO_RNG; + cmd.code = 0; + cmd.idx = 0; + ace_issue_cmd(regs, &cmd); + } + + ace_unmask_irq(dev); + local_irq_restore(flags); + + return 0; +} + + +static inline dma_addr_t +ace_map_tx_skb(struct ace_private *ap, struct sk_buff *skb, + struct sk_buff *tail, u32 idx) +{ + dma_addr_t mapping; + struct tx_ring_info *info; + + mapping = pci_map_page(ap->pdev, virt_to_page(skb->data), + offset_in_page(skb->data), + skb->len, PCI_DMA_TODEVICE); + + info = ap->skb->tx_skbuff + idx; + info->skb = tail; + pci_unmap_addr_set(info, mapping, mapping); + pci_unmap_len_set(info, maplen, skb->len); + return mapping; +} + + +static inline void +ace_load_tx_bd(struct ace_private *ap, struct tx_desc *desc, u64 addr, + u32 flagsize, u32 vlan_tag) +{ +#if !USE_TX_COAL_NOW + flagsize &= ~BD_FLG_COAL_NOW; +#endif + + if (ACE_IS_TIGON_I(ap)) { + struct tx_desc __iomem *io = (struct tx_desc __iomem *) desc; + writel(addr >> 32, &io->addr.addrhi); + writel(addr & 0xffffffff, &io->addr.addrlo); + writel(flagsize, &io->flagsize); +#if ACENIC_DO_VLAN + writel(vlan_tag, &io->vlanres); +#endif + } else { + desc->addr.addrhi = addr >> 32; + desc->addr.addrlo = addr; + desc->flagsize = flagsize; +#if ACENIC_DO_VLAN + desc->vlanres = vlan_tag; +#endif + } +} + + +static int ace_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct ace_private *ap = netdev_priv(dev); + struct ace_regs __iomem *regs = ap->regs; + struct tx_desc *desc; + u32 idx, flagsize; + unsigned long maxjiff = jiffies + 3*HZ; + +restart: + idx = ap->tx_prd; + + if (tx_ring_full(ap, ap->tx_ret_csm, idx)) + goto overflow; + + if (!skb_shinfo(skb)->nr_frags) { + dma_addr_t mapping; + u32 vlan_tag = 0; + + mapping = ace_map_tx_skb(ap, skb, skb, idx); + flagsize = (skb->len << 16) | (BD_FLG_END); + if (skb->ip_summed == CHECKSUM_HW) + flagsize |= BD_FLG_TCP_UDP_SUM; +#if ACENIC_DO_VLAN + if (vlan_tx_tag_present(skb)) { + flagsize |= BD_FLG_VLAN_TAG; + vlan_tag = vlan_tx_tag_get(skb); + } +#endif + desc = ap->tx_ring + idx; + idx = (idx + 1) % ACE_TX_RING_ENTRIES(ap); + + /* Look at ace_tx_int for explanations. */ + if (tx_ring_full(ap, ap->tx_ret_csm, idx)) + flagsize |= BD_FLG_COAL_NOW; + + ace_load_tx_bd(ap, desc, mapping, flagsize, vlan_tag); + } else { + dma_addr_t mapping; + u32 vlan_tag = 0; + int i, len = 0; + + mapping = ace_map_tx_skb(ap, skb, NULL, idx); + flagsize = (skb_headlen(skb) << 16); + if (skb->ip_summed == CHECKSUM_HW) + flagsize |= BD_FLG_TCP_UDP_SUM; +#if ACENIC_DO_VLAN + if (vlan_tx_tag_present(skb)) { + flagsize |= BD_FLG_VLAN_TAG; + vlan_tag = vlan_tx_tag_get(skb); + } +#endif + + ace_load_tx_bd(ap, ap->tx_ring + idx, mapping, flagsize, vlan_tag); + + idx = (idx + 1) % ACE_TX_RING_ENTRIES(ap); + + for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + struct tx_ring_info *info; + + len += frag->size; + info = ap->skb->tx_skbuff + idx; + desc = ap->tx_ring + idx; + + mapping = pci_map_page(ap->pdev, frag->page, + frag->page_offset, frag->size, + PCI_DMA_TODEVICE); + + flagsize = (frag->size << 16); + if (skb->ip_summed == CHECKSUM_HW) + flagsize |= BD_FLG_TCP_UDP_SUM; + idx = (idx + 1) % ACE_TX_RING_ENTRIES(ap); + + if (i == skb_shinfo(skb)->nr_frags - 1) { + flagsize |= BD_FLG_END; + if (tx_ring_full(ap, ap->tx_ret_csm, idx)) + flagsize |= BD_FLG_COAL_NOW; + + /* + * Only the last fragment frees + * the skb! + */ + info->skb = skb; + } else { + info->skb = NULL; + } + pci_unmap_addr_set(info, mapping, mapping); + pci_unmap_len_set(info, maplen, frag->size); + ace_load_tx_bd(ap, desc, mapping, flagsize, vlan_tag); + } + } + + wmb(); + ap->tx_prd = idx; + ace_set_txprd(regs, ap, idx); + + if (flagsize & BD_FLG_COAL_NOW) { + netif_stop_queue(dev); + + /* + * A TX-descriptor producer (an IRQ) might have gotten + * inbetween, making the ring free again. Since xmit is + * serialized, this is the only situation we have to + * re-test. + */ + if (!tx_ring_full(ap, ap->tx_ret_csm, idx)) + netif_wake_queue(dev); + } + + dev->trans_start = jiffies; + return NETDEV_TX_OK; + +overflow: + /* + * This race condition is unavoidable with lock-free drivers. + * We wake up the queue _before_ tx_prd is advanced, so that we can + * enter hard_start_xmit too early, while tx ring still looks closed. + * This happens ~1-4 times per 100000 packets, so that we can allow + * to loop syncing to other CPU. Probably, we need an additional + * wmb() in ace_tx_intr as well. + * + * Note that this race is relieved by reserving one more entry + * in tx ring than it is necessary (see original non-SG driver). + * However, with SG we need to reserve 2*MAX_SKB_FRAGS+1, which + * is already overkill. + * + * Alternative is to return with 1 not throttling queue. In this + * case loop becomes longer, no more useful effects. + */ + if (time_before(jiffies, maxjiff)) { + barrier(); + cpu_relax(); + goto restart; + } + + /* The ring is stuck full. */ + printk(KERN_WARNING "%s: Transmit ring stuck full\n", dev->name); + return NETDEV_TX_BUSY; +} + + +static int ace_change_mtu(struct net_device *dev, int new_mtu) +{ + struct ace_private *ap = netdev_priv(dev); + struct ace_regs __iomem *regs = ap->regs; + + if (new_mtu > ACE_JUMBO_MTU) + return -EINVAL; + + writel(new_mtu + ETH_HLEN + 4, ®s->IfMtu); + dev->mtu = new_mtu; + + if (new_mtu > ACE_STD_MTU) { + if (!(ap->jumbo)) { + printk(KERN_INFO "%s: Enabling Jumbo frame " + "support\n", dev->name); + ap->jumbo = 1; + if (!test_and_set_bit(0, &ap->jumbo_refill_busy)) + ace_load_jumbo_rx_ring(ap, RX_JUMBO_SIZE); + ace_set_rxtx_parms(dev, 1); + } + } else { + while (test_and_set_bit(0, &ap->jumbo_refill_busy)); + ace_sync_irq(dev->irq); + ace_set_rxtx_parms(dev, 0); + if (ap->jumbo) { + struct cmd cmd; + + cmd.evt = C_RESET_JUMBO_RNG; + cmd.code = 0; + cmd.idx = 0; + ace_issue_cmd(regs, &cmd); + } + } + + return 0; +} + +static int ace_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) +{ + struct ace_private *ap = netdev_priv(dev); + struct ace_regs __iomem *regs = ap->regs; + u32 link; + + memset(ecmd, 0, sizeof(struct ethtool_cmd)); + ecmd->supported = + (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full | + SUPPORTED_Autoneg | SUPPORTED_FIBRE); + + ecmd->port = PORT_FIBRE; + ecmd->transceiver = XCVR_INTERNAL; + + link = readl(®s->GigLnkState); + if (link & LNK_1000MB) + ecmd->speed = SPEED_1000; + else { + link = readl(®s->FastLnkState); + if (link & LNK_100MB) + ecmd->speed = SPEED_100; + else if (link & LNK_10MB) + ecmd->speed = SPEED_10; + else + ecmd->speed = 0; + } + if (link & LNK_FULL_DUPLEX) + ecmd->duplex = DUPLEX_FULL; + else + ecmd->duplex = DUPLEX_HALF; + + if (link & LNK_NEGOTIATE) + ecmd->autoneg = AUTONEG_ENABLE; + else + ecmd->autoneg = AUTONEG_DISABLE; + +#if 0 + /* + * Current struct ethtool_cmd is insufficient + */ + ecmd->trace = readl(®s->TuneTrace); + + ecmd->txcoal = readl(®s->TuneTxCoalTicks); + ecmd->rxcoal = readl(®s->TuneRxCoalTicks); +#endif + ecmd->maxtxpkt = readl(®s->TuneMaxTxDesc); + ecmd->maxrxpkt = readl(®s->TuneMaxRxDesc); + + return 0; +} + +static int ace_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) +{ + struct ace_private *ap = netdev_priv(dev); + struct ace_regs __iomem *regs = ap->regs; + u32 link, speed; + + link = readl(®s->GigLnkState); + if (link & LNK_1000MB) + speed = SPEED_1000; + else { + link = readl(®s->FastLnkState); + if (link & LNK_100MB) + speed = SPEED_100; + else if (link & LNK_10MB) + speed = SPEED_10; + else + speed = SPEED_100; + } + + link = LNK_ENABLE | LNK_1000MB | LNK_100MB | LNK_10MB | + LNK_RX_FLOW_CTL_Y | LNK_NEG_FCTL; + if (!ACE_IS_TIGON_I(ap)) + link |= LNK_TX_FLOW_CTL_Y; + if (ecmd->autoneg == AUTONEG_ENABLE) + link |= LNK_NEGOTIATE; + if (ecmd->speed != speed) { + link &= ~(LNK_1000MB | LNK_100MB | LNK_10MB); + switch (speed) { + case SPEED_1000: + link |= LNK_1000MB; + break; + case SPEED_100: + link |= LNK_100MB; + break; + case SPEED_10: + link |= LNK_10MB; + break; + } + } + + if (ecmd->duplex == DUPLEX_FULL) + link |= LNK_FULL_DUPLEX; + + if (link != ap->link) { + struct cmd cmd; + printk(KERN_INFO "%s: Renegotiating link state\n", + dev->name); + + ap->link = link; + writel(link, ®s->TuneLink); + if (!ACE_IS_TIGON_I(ap)) + writel(link, ®s->TuneFastLink); + wmb(); + + cmd.evt = C_LNK_NEGOTIATION; + cmd.code = 0; + cmd.idx = 0; + ace_issue_cmd(regs, &cmd); + } + return 0; +} + +static void ace_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + struct ace_private *ap = netdev_priv(dev); + + strlcpy(info->driver, "acenic", sizeof(info->driver)); + snprintf(info->version, sizeof(info->version), "%i.%i.%i", + tigonFwReleaseMajor, tigonFwReleaseMinor, + tigonFwReleaseFix); + + if (ap->pdev) + strlcpy(info->bus_info, pci_name(ap->pdev), + sizeof(info->bus_info)); + +} + +/* + * Set the hardware MAC address. + */ +static int ace_set_mac_addr(struct net_device *dev, void *p) +{ + struct ace_private *ap = netdev_priv(dev); + struct ace_regs __iomem *regs = ap->regs; + struct sockaddr *addr=p; + u8 *da; + struct cmd cmd; + + if(netif_running(dev)) + return -EBUSY; + + memcpy(dev->dev_addr, addr->sa_data,dev->addr_len); + + da = (u8 *)dev->dev_addr; + + writel(da[0] << 8 | da[1], ®s->MacAddrHi); + writel((da[2] << 24) | (da[3] << 16) | (da[4] << 8) | da[5], + ®s->MacAddrLo); + + cmd.evt = C_SET_MAC_ADDR; + cmd.code = 0; + cmd.idx = 0; + ace_issue_cmd(regs, &cmd); + + return 0; +} + + +static void ace_set_multicast_list(struct net_device *dev) +{ + struct ace_private *ap = netdev_priv(dev); + struct ace_regs __iomem *regs = ap->regs; + struct cmd cmd; + + if ((dev->flags & IFF_ALLMULTI) && !(ap->mcast_all)) { + cmd.evt = C_SET_MULTICAST_MODE; + cmd.code = C_C_MCAST_ENABLE; + cmd.idx = 0; + ace_issue_cmd(regs, &cmd); + ap->mcast_all = 1; + } else if (ap->mcast_all) { + cmd.evt = C_SET_MULTICAST_MODE; + cmd.code = C_C_MCAST_DISABLE; + cmd.idx = 0; + ace_issue_cmd(regs, &cmd); + ap->mcast_all = 0; + } + + if ((dev->flags & IFF_PROMISC) && !(ap->promisc)) { + cmd.evt = C_SET_PROMISC_MODE; + cmd.code = C_C_PROMISC_ENABLE; + cmd.idx = 0; + ace_issue_cmd(regs, &cmd); + ap->promisc = 1; + }else if (!(dev->flags & IFF_PROMISC) && (ap->promisc)) { + cmd.evt = C_SET_PROMISC_MODE; + cmd.code = C_C_PROMISC_DISABLE; + cmd.idx = 0; + ace_issue_cmd(regs, &cmd); + ap->promisc = 0; + } + + /* + * For the time being multicast relies on the upper layers + * filtering it properly. The Firmware does not allow one to + * set the entire multicast list at a time and keeping track of + * it here is going to be messy. + */ + if ((dev->mc_count) && !(ap->mcast_all)) { + cmd.evt = C_SET_MULTICAST_MODE; + cmd.code = C_C_MCAST_ENABLE; + cmd.idx = 0; + ace_issue_cmd(regs, &cmd); + }else if (!ap->mcast_all) { + cmd.evt = C_SET_MULTICAST_MODE; + cmd.code = C_C_MCAST_DISABLE; + cmd.idx = 0; + ace_issue_cmd(regs, &cmd); + } +} + + +static struct net_device_stats *ace_get_stats(struct net_device *dev) +{ + struct ace_private *ap = netdev_priv(dev); + struct ace_mac_stats __iomem *mac_stats = + (struct ace_mac_stats __iomem *)ap->regs->Stats; + + ap->stats.rx_missed_errors = readl(&mac_stats->drop_space); + ap->stats.multicast = readl(&mac_stats->kept_mc); + ap->stats.collisions = readl(&mac_stats->coll); + + return &ap->stats; +} + + +static void __devinit ace_copy(struct ace_regs __iomem *regs, void *src, + u32 dest, int size) +{ + void __iomem *tdest; + u32 *wsrc; + short tsize, i; + + if (size <= 0) + return; + + while (size > 0) { + tsize = min_t(u32, ((~dest & (ACE_WINDOW_SIZE - 1)) + 1), + min_t(u32, size, ACE_WINDOW_SIZE)); + tdest = (void __iomem *) ®s->Window + + (dest & (ACE_WINDOW_SIZE - 1)); + writel(dest & ~(ACE_WINDOW_SIZE - 1), ®s->WinBase); + /* + * This requires byte swapping on big endian, however + * writel does that for us + */ + wsrc = src; + for (i = 0; i < (tsize / 4); i++) { + writel(wsrc[i], tdest + i*4); + } + dest += tsize; + src += tsize; + size -= tsize; + } + + return; +} + + +static void __devinit ace_clear(struct ace_regs __iomem *regs, u32 dest, int size) +{ + void __iomem *tdest; + short tsize = 0, i; + + if (size <= 0) + return; + + while (size > 0) { + tsize = min_t(u32, ((~dest & (ACE_WINDOW_SIZE - 1)) + 1), + min_t(u32, size, ACE_WINDOW_SIZE)); + tdest = (void __iomem *) ®s->Window + + (dest & (ACE_WINDOW_SIZE - 1)); + writel(dest & ~(ACE_WINDOW_SIZE - 1), ®s->WinBase); + + for (i = 0; i < (tsize / 4); i++) { + writel(0, tdest + i*4); + } + + dest += tsize; + size -= tsize; + } + + return; +} + + +/* + * Download the firmware into the SRAM on the NIC + * + * This operation requires the NIC to be halted and is performed with + * interrupts disabled and with the spinlock hold. + */ +int __devinit ace_load_firmware(struct net_device *dev) +{ + struct ace_private *ap = netdev_priv(dev); + struct ace_regs __iomem *regs = ap->regs; + + if (!(readl(®s->CpuCtrl) & CPU_HALTED)) { + printk(KERN_ERR "%s: trying to download firmware while the " + "CPU is running!\n", ap->name); + return -EFAULT; + } + + /* + * Do not try to clear more than 512KB or we end up seeing + * funny things on NICs with only 512KB SRAM + */ + ace_clear(regs, 0x2000, 0x80000-0x2000); + if (ACE_IS_TIGON_I(ap)) { + ace_copy(regs, tigonFwText, tigonFwTextAddr, tigonFwTextLen); + ace_copy(regs, tigonFwData, tigonFwDataAddr, tigonFwDataLen); + ace_copy(regs, tigonFwRodata, tigonFwRodataAddr, + tigonFwRodataLen); + ace_clear(regs, tigonFwBssAddr, tigonFwBssLen); + ace_clear(regs, tigonFwSbssAddr, tigonFwSbssLen); + }else if (ap->version == 2) { + ace_clear(regs, tigon2FwBssAddr, tigon2FwBssLen); + ace_clear(regs, tigon2FwSbssAddr, tigon2FwSbssLen); + ace_copy(regs, tigon2FwText, tigon2FwTextAddr,tigon2FwTextLen); + ace_copy(regs, tigon2FwRodata, tigon2FwRodataAddr, + tigon2FwRodataLen); + ace_copy(regs, tigon2FwData, tigon2FwDataAddr,tigon2FwDataLen); + } + + return 0; +} + + +/* + * The eeprom on the AceNIC is an Atmel i2c EEPROM. + * + * Accessing the EEPROM is `interesting' to say the least - don't read + * this code right after dinner. + * + * This is all about black magic and bit-banging the device .... I + * wonder in what hospital they have put the guy who designed the i2c + * specs. + * + * Oh yes, this is only the beginning! + * + * Thanks to Stevarino Webinski for helping tracking down the bugs in the + * code i2c readout code by beta testing all my hacks. + */ +static void __devinit eeprom_start(struct ace_regs __iomem *regs) +{ + u32 local; + + readl(®s->LocalCtrl); + udelay(ACE_SHORT_DELAY); + local = readl(®s->LocalCtrl); + local |= EEPROM_DATA_OUT | EEPROM_WRITE_ENABLE; + writel(local, ®s->LocalCtrl); + readl(®s->LocalCtrl); + mb(); + udelay(ACE_SHORT_DELAY); + local |= EEPROM_CLK_OUT; + writel(local, ®s->LocalCtrl); + readl(®s->LocalCtrl); + mb(); + udelay(ACE_SHORT_DELAY); + local &= ~EEPROM_DATA_OUT; + writel(local, ®s->LocalCtrl); + readl(®s->LocalCtrl); + mb(); + udelay(ACE_SHORT_DELAY); + local &= ~EEPROM_CLK_OUT; + writel(local, ®s->LocalCtrl); + readl(®s->LocalCtrl); + mb(); +} + + +static void __devinit eeprom_prep(struct ace_regs __iomem *regs, u8 magic) +{ + short i; + u32 local; + + udelay(ACE_SHORT_DELAY); + local = readl(®s->LocalCtrl); + local &= ~EEPROM_DATA_OUT; + local |= EEPROM_WRITE_ENABLE; + writel(local, ®s->LocalCtrl); + readl(®s->LocalCtrl); + mb(); + + for (i = 0; i < 8; i++, magic <<= 1) { + udelay(ACE_SHORT_DELAY); + if (magic & 0x80) + local |= EEPROM_DATA_OUT; + else + local &= ~EEPROM_DATA_OUT; + writel(local, ®s->LocalCtrl); + readl(®s->LocalCtrl); + mb(); + + udelay(ACE_SHORT_DELAY); + local |= EEPROM_CLK_OUT; + writel(local, ®s->LocalCtrl); + readl(®s->LocalCtrl); + mb(); + udelay(ACE_SHORT_DELAY); + local &= ~(EEPROM_CLK_OUT | EEPROM_DATA_OUT); + writel(local, ®s->LocalCtrl); + readl(®s->LocalCtrl); + mb(); + } +} + + +static int __devinit eeprom_check_ack(struct ace_regs __iomem *regs) +{ + int state; + u32 local; + + local = readl(®s->LocalCtrl); + local &= ~EEPROM_WRITE_ENABLE; + writel(local, ®s->LocalCtrl); + readl(®s->LocalCtrl); + mb(); + udelay(ACE_LONG_DELAY); + local |= EEPROM_CLK_OUT; + writel(local, ®s->LocalCtrl); + readl(®s->LocalCtrl); + mb(); + udelay(ACE_SHORT_DELAY); + /* sample data in middle of high clk */ + state = (readl(®s->LocalCtrl) & EEPROM_DATA_IN) != 0; + udelay(ACE_SHORT_DELAY); + mb(); + writel(readl(®s->LocalCtrl) & ~EEPROM_CLK_OUT, ®s->LocalCtrl); + readl(®s->LocalCtrl); + mb(); + + return state; +} + + +static void __devinit eeprom_stop(struct ace_regs __iomem *regs) +{ + u32 local; + + udelay(ACE_SHORT_DELAY); + local = readl(®s->LocalCtrl); + local |= EEPROM_WRITE_ENABLE; + writel(local, ®s->LocalCtrl); + readl(®s->LocalCtrl); + mb(); + udelay(ACE_SHORT_DELAY); + local &= ~EEPROM_DATA_OUT; + writel(local, ®s->LocalCtrl); + readl(®s->LocalCtrl); + mb(); + udelay(ACE_SHORT_DELAY); + local |= EEPROM_CLK_OUT; + writel(local, ®s->LocalCtrl); + readl(®s->LocalCtrl); + mb(); + udelay(ACE_SHORT_DELAY); + local |= EEPROM_DATA_OUT; + writel(local, ®s->LocalCtrl); + readl(®s->LocalCtrl); + mb(); + udelay(ACE_LONG_DELAY); + local &= ~EEPROM_CLK_OUT; + writel(local, ®s->LocalCtrl); + mb(); +} + + +/* + * Read a whole byte from the EEPROM. + */ +static int __devinit read_eeprom_byte(struct net_device *dev, + unsigned long offset) +{ + struct ace_private *ap = netdev_priv(dev); + struct ace_regs __iomem *regs = ap->regs; + unsigned long flags; + u32 local; + int result = 0; + short i; + + if (!dev) { + printk(KERN_ERR "No device!\n"); + result = -ENODEV; + goto out; + } + + /* + * Don't take interrupts on this CPU will bit banging + * the %#%#@$ I2C device + */ + local_irq_save(flags); + + eeprom_start(regs); + + eeprom_prep(regs, EEPROM_WRITE_SELECT); + if (eeprom_check_ack(regs)) { + local_irq_restore(flags); + printk(KERN_ERR "%s: Unable to sync eeprom\n", ap->name); + result = -EIO; + goto eeprom_read_error; + } + + eeprom_prep(regs, (offset >> 8) & 0xff); + if (eeprom_check_ack(regs)) { + local_irq_restore(flags); + printk(KERN_ERR "%s: Unable to set address byte 0\n", + ap->name); + result = -EIO; + goto eeprom_read_error; + } + + eeprom_prep(regs, offset & 0xff); + if (eeprom_check_ack(regs)) { + local_irq_restore(flags); + printk(KERN_ERR "%s: Unable to set address byte 1\n", + ap->name); + result = -EIO; + goto eeprom_read_error; + } + + eeprom_start(regs); + eeprom_prep(regs, EEPROM_READ_SELECT); + if (eeprom_check_ack(regs)) { + local_irq_restore(flags); + printk(KERN_ERR "%s: Unable to set READ_SELECT\n", + ap->name); + result = -EIO; + goto eeprom_read_error; + } + + for (i = 0; i < 8; i++) { + local = readl(®s->LocalCtrl); + local &= ~EEPROM_WRITE_ENABLE; + writel(local, ®s->LocalCtrl); + readl(®s->LocalCtrl); + udelay(ACE_LONG_DELAY); + mb(); + local |= EEPROM_CLK_OUT; + writel(local, ®s->LocalCtrl); + readl(®s->LocalCtrl); + mb(); + udelay(ACE_SHORT_DELAY); + /* sample data mid high clk */ + result = (result << 1) | + ((readl(®s->LocalCtrl) & EEPROM_DATA_IN) != 0); + udelay(ACE_SHORT_DELAY); + mb(); + local = readl(®s->LocalCtrl); + local &= ~EEPROM_CLK_OUT; + writel(local, ®s->LocalCtrl); + readl(®s->LocalCtrl); + udelay(ACE_SHORT_DELAY); + mb(); + if (i == 7) { + local |= EEPROM_WRITE_ENABLE; + writel(local, ®s->LocalCtrl); + readl(®s->LocalCtrl); + mb(); + udelay(ACE_SHORT_DELAY); + } + } + + local |= EEPROM_DATA_OUT; + writel(local, ®s->LocalCtrl); + readl(®s->LocalCtrl); + mb(); + udelay(ACE_SHORT_DELAY); + writel(readl(®s->LocalCtrl) | EEPROM_CLK_OUT, ®s->LocalCtrl); + readl(®s->LocalCtrl); + udelay(ACE_LONG_DELAY); + writel(readl(®s->LocalCtrl) & ~EEPROM_CLK_OUT, ®s->LocalCtrl); + readl(®s->LocalCtrl); + mb(); + udelay(ACE_SHORT_DELAY); + eeprom_stop(regs); + + local_irq_restore(flags); + out: + return result; + + eeprom_read_error: + printk(KERN_ERR "%s: Unable to read eeprom byte 0x%02lx\n", + ap->name, offset); + goto out; +} + + +/* + * Local variables: + * compile-command: "gcc -D__SMP__ -D__KERNEL__ -DMODULE -I../../include -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -pipe -fno-strength-reduce -DMODVERSIONS -include ../../include/linux/modversions.h -c -o acenic.o acenic.c" + * End: + */ |