diff options
| author | Matthew Wilcox <matthew@wil.cx> | 2008-08-12 07:13:14 -0600 |
|---|---|---|
| committer | Jeff Garzik <jgarzik@redhat.com> | 2008-09-24 18:49:01 -0400 |
| commit | f382a0a8e9403c6d7f8b2cfa21e41fefb5d0c9bd (patch) | |
| tree | 2fa31ffb8dc9c32d5e497309c3388e57f19b9e95 /drivers/net/atl1e/atl1e_main.c | |
| parent | 70666c71957b62c8e9ea5c0d999a4bfd214c80d2 (diff) | |
[netdrvr] atl1e: Don't take the mdio_lock in atl1e_probe
Lockdep warns about the mdio_lock taken with interrupts enabled then later
taken from interrupt context. Initially, I considered changing these
to spin_lock_irq/spin_unlock_irq, but then I looked at atl1e_phy_init()
and saw that it calls msleep(). Sleeping while holding a spinlock is
not allowed either.
In the probe path, we haven't registered the interrupt handler, so
it can't poke at this card yet. It's before we call register_netdev(),
so I don't think any other threads can reach this card either. If I'm
right, we don't need a spinlock at all.
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Diffstat (limited to 'drivers/net/atl1e/atl1e_main.c')
| -rw-r--r-- | drivers/net/atl1e/atl1e_main.c | 2 |
1 files changed, 0 insertions, 2 deletions
diff --git a/drivers/net/atl1e/atl1e_main.c b/drivers/net/atl1e/atl1e_main.c index 7685b995ff9..9b603528143 100644 --- a/drivers/net/atl1e/atl1e_main.c +++ b/drivers/net/atl1e/atl1e_main.c @@ -2390,9 +2390,7 @@ static int __devinit atl1e_probe(struct pci_dev *pdev, } /* Init GPHY as early as possible due to power saving issue */ - spin_lock(&adapter->mdio_lock); atl1e_phy_init(&adapter->hw); - spin_unlock(&adapter->mdio_lock); /* reset the controller to * put the device in a known good starting state */ err = atl1e_reset_hw(&adapter->hw); |