8390: Move the 8390 related drivers

Moves the drivers for the National Semi-conductor 8390 chipset into
drivers/net/ethernet/8390/ and the necessary Kconfig and Makefile
changes.

CC: Donald Becker <becker@scyld.com>
CC: Paul Gortmaker <paul.gortmaker@windriver.com>
CC: Alain Malek <alain.malek@cryogen.com>
CC: Peter De Schrijver <p2@mind.be>
CC: "David Huggins-Daines" <dhd@debian.org>
CC: Wim Dumon <wimpie@kotnet.org>
CC: Yoshinori Sato <ysato@users.sourceforge.jp>
CC: David Hinds <dahinds@users.sourceforge.net>
CC: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 0 insertions, 1010 deletions

diff --git a/drivers/net/ax88796.c b/drivers/net/ax88796.c
deleted file mode 100644
index e7cb8c8b977..00000000000
--- a/drivers/net/ax88796.c
+++ /dev/null
@@ -1,1010 +0,0 @@
-/* drivers/net/ax88796.c
- *
- * Copyright 2005,2007 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Asix AX88796 10/100 Ethernet controller support
- *	Based on ne.c, by Donald Becker, et-al.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/isapnp.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/ethtool.h>
-#include <linux/mdio-bitbang.h>
-#include <linux/phy.h>
-#include <linux/eeprom_93cx6.h>
-#include <linux/slab.h>
-
-#include <net/ax88796.h>
-
-#include <asm/system.h>
-
-/* Rename the lib8390.c functions to show that they are in this driver */
-#define __ei_open ax_ei_open
-#define __ei_close ax_ei_close
-#define __ei_poll ax_ei_poll
-#define __ei_start_xmit ax_ei_start_xmit
-#define __ei_tx_timeout ax_ei_tx_timeout
-#define __ei_get_stats ax_ei_get_stats
-#define __ei_set_multicast_list ax_ei_set_multicast_list
-#define __ei_interrupt ax_ei_interrupt
-#define ____alloc_ei_netdev ax__alloc_ei_netdev
-#define __NS8390_init ax_NS8390_init
-
-/* force unsigned long back to 'void __iomem *' */
-#define ax_convert_addr(_a) ((void __force __iomem *)(_a))
-
-#define ei_inb(_a) readb(ax_convert_addr(_a))
-#define ei_outb(_v, _a) writeb(_v, ax_convert_addr(_a))
-
-#define ei_inb_p(_a) ei_inb(_a)
-#define ei_outb_p(_v, _a) ei_outb(_v, _a)
-
-/* define EI_SHIFT() to take into account our register offsets */
-#define EI_SHIFT(x) (ei_local->reg_offset[(x)])
-
-/* Ensure we have our RCR base value */
-#define AX88796_PLATFORM
-
-static unsigned char version[] = "ax88796.c: Copyright 2005,2007 Simtec Electronics\n";
-
-#include "lib8390.c"
-
-#define DRV_NAME "ax88796"
-#define DRV_VERSION "1.00"
-
-/* from ne.c */
-#define NE_CMD		EI_SHIFT(0x00)
-#define NE_RESET	EI_SHIFT(0x1f)
-#define NE_DATAPORT	EI_SHIFT(0x10)
-
-#define NE1SM_START_PG	0x20	/* First page of TX buffer */
-#define NE1SM_STOP_PG	0x40	/* Last page +1 of RX ring */
-#define NESM_START_PG	0x40	/* First page of TX buffer */
-#define NESM_STOP_PG	0x80	/* Last page +1 of RX ring */
-
-#define AX_GPOC_PPDSET	BIT(6)
-
-/* device private data */
-
-struct ax_device {
-	struct mii_bus *mii_bus;
-	struct mdiobb_ctrl bb_ctrl;
-	struct phy_device *phy_dev;
-	void __iomem *addr_memr;
-	u8 reg_memr;
-	int link;
-	int speed;
-	int duplex;
-
-	void __iomem *map2;
-	const struct ax_plat_data *plat;
-
-	unsigned char running;
-	unsigned char resume_open;
-	unsigned int irqflags;
-
-	u32 reg_offsets[0x20];
-};
-
-static inline struct ax_device *to_ax_dev(struct net_device *dev)
-{
-	struct ei_device *ei_local = netdev_priv(dev);
-	return (struct ax_device *)(ei_local + 1);
-}
-
-/*
- * ax_initial_check
- *
- * do an initial probe for the card to check wether it exists
- * and is functional
- */
-static int ax_initial_check(struct net_device *dev)
-{
-	struct ei_device *ei_local = netdev_priv(dev);
-	void __iomem *ioaddr = ei_local->mem;
-	int reg0;
-	int regd;
-
-	reg0 = ei_inb(ioaddr);
-	if (reg0 == 0xFF)
-		return -ENODEV;
-
-	ei_outb(E8390_NODMA + E8390_PAGE1 + E8390_STOP, ioaddr + E8390_CMD);
-	regd = ei_inb(ioaddr + 0x0d);
-	ei_outb(0xff, ioaddr + 0x0d);
-	ei_outb(E8390_NODMA + E8390_PAGE0, ioaddr + E8390_CMD);
-	ei_inb(ioaddr + EN0_COUNTER0); /* Clear the counter by reading. */
-	if (ei_inb(ioaddr + EN0_COUNTER0) != 0) {
-		ei_outb(reg0, ioaddr);
-		ei_outb(regd, ioaddr + 0x0d);	/* Restore the old values. */
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
-/*
- * Hard reset the card. This used to pause for the same period that a
- * 8390 reset command required, but that shouldn't be necessary.
- */
-static void ax_reset_8390(struct net_device *dev)
-{
-	struct ei_device *ei_local = netdev_priv(dev);
-	unsigned long reset_start_time = jiffies;
-	void __iomem *addr = (void __iomem *)dev->base_addr;
-
-	if (ei_debug > 1)
-		netdev_dbg(dev, "resetting the 8390 t=%ld\n", jiffies);
-
-	ei_outb(ei_inb(addr + NE_RESET), addr + NE_RESET);
-
-	ei_local->txing = 0;
-	ei_local->dmaing = 0;
-
-	/* This check _should_not_ be necessary, omit eventually. */
-	while ((ei_inb(addr + EN0_ISR) & ENISR_RESET) == 0) {
-		if (jiffies - reset_start_time > 2 * HZ / 100) {
-			netdev_warn(dev, "%s: did not complete.\n", __func__);
-			break;
-		}
-	}
-
-	ei_outb(ENISR_RESET, addr + EN0_ISR);	/* Ack intr. */
-}
-
-
-static void ax_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
-			    int ring_page)
-{
-	struct ei_device *ei_local = netdev_priv(dev);
-	void __iomem *nic_base = ei_local->mem;
-
-	/* This *shouldn't* happen. If it does, it's the last thing you'll see */
-	if (ei_local->dmaing) {
-		netdev_err(dev, "DMAing conflict in %s "
-			"[DMAstat:%d][irqlock:%d].\n",
-			__func__,
-			ei_local->dmaing, ei_local->irqlock);
-		return;
-	}
-
-	ei_local->dmaing |= 0x01;
-	ei_outb(E8390_NODMA + E8390_PAGE0 + E8390_START, nic_base + NE_CMD);
-	ei_outb(sizeof(struct e8390_pkt_hdr), nic_base + EN0_RCNTLO);
-	ei_outb(0, nic_base + EN0_RCNTHI);
-	ei_outb(0, nic_base + EN0_RSARLO);		/* On page boundary */
-	ei_outb(ring_page, nic_base + EN0_RSARHI);
-	ei_outb(E8390_RREAD+E8390_START, nic_base + NE_CMD);
-
-	if (ei_local->word16)
-		readsw(nic_base + NE_DATAPORT, hdr,
-		       sizeof(struct e8390_pkt_hdr) >> 1);
-	else
-		readsb(nic_base + NE_DATAPORT, hdr,
-		       sizeof(struct e8390_pkt_hdr));
-
-	ei_outb(ENISR_RDC, nic_base + EN0_ISR);	/* Ack intr. */
-	ei_local->dmaing &= ~0x01;
-
-	le16_to_cpus(&hdr->count);
-}
-
-
-/*
- * Block input and output, similar to the Crynwr packet driver. If
- * you are porting to a new ethercard, look at the packet driver
- * source for hints. The NEx000 doesn't share the on-board packet
- * memory -- you have to put the packet out through the "remote DMA"
- * dataport using ei_outb.
- */
-static void ax_block_input(struct net_device *dev, int count,
-			   struct sk_buff *skb, int ring_offset)
-{
-	struct ei_device *ei_local = netdev_priv(dev);
-	void __iomem *nic_base = ei_local->mem;
-	char *buf = skb->data;
-
-	if (ei_local->dmaing) {
-		netdev_err(dev,
-			"DMAing conflict in %s "
-			"[DMAstat:%d][irqlock:%d].\n",
-			__func__,
-			ei_local->dmaing, ei_local->irqlock);
-		return;
-	}
-
-	ei_local->dmaing |= 0x01;
-
-	ei_outb(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base + NE_CMD);
-	ei_outb(count & 0xff, nic_base + EN0_RCNTLO);
-	ei_outb(count >> 8, nic_base + EN0_RCNTHI);
-	ei_outb(ring_offset & 0xff, nic_base + EN0_RSARLO);
-	ei_outb(ring_offset >> 8, nic_base + EN0_RSARHI);
-	ei_outb(E8390_RREAD+E8390_START, nic_base + NE_CMD);
-
-	if (ei_local->word16) {
-		readsw(nic_base + NE_DATAPORT, buf, count >> 1);
-		if (count & 0x01)
-			buf[count-1] = ei_inb(nic_base + NE_DATAPORT);
-
-	} else {
-		readsb(nic_base + NE_DATAPORT, buf, count);
-	}
-
-	ei_local->dmaing &= ~1;
-}
-
-static void ax_block_output(struct net_device *dev, int count,
-			    const unsigned char *buf, const int start_page)
-{
-	struct ei_device *ei_local = netdev_priv(dev);
-	void __iomem *nic_base = ei_local->mem;
-	unsigned long dma_start;
-
-	/*
-	 * Round the count up for word writes. Do we need to do this?
-	 * What effect will an odd byte count have on the 8390?  I
-	 * should check someday.
-	 */
-	if (ei_local->word16 && (count & 0x01))
-		count++;
-
-	/* This *shouldn't* happen. If it does, it's the last thing you'll see */
-	if (ei_local->dmaing) {
-		netdev_err(dev, "DMAing conflict in %s."
-			"[DMAstat:%d][irqlock:%d]\n",
-			__func__,
-		       ei_local->dmaing, ei_local->irqlock);
-		return;
-	}
-
-	ei_local->dmaing |= 0x01;
-	/* We should already be in page 0, but to be safe... */
-	ei_outb(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base + NE_CMD);
-
-	ei_outb(ENISR_RDC, nic_base + EN0_ISR);
-
-	/* Now the normal output. */
-	ei_outb(count & 0xff, nic_base + EN0_RCNTLO);
-	ei_outb(count >> 8, nic_base + EN0_RCNTHI);
-	ei_outb(0x00, nic_base + EN0_RSARLO);
-	ei_outb(start_page, nic_base + EN0_RSARHI);
-
-	ei_outb(E8390_RWRITE+E8390_START, nic_base + NE_CMD);
-	if (ei_local->word16)
-		writesw(nic_base + NE_DATAPORT, buf, count >> 1);
-	else
-		writesb(nic_base + NE_DATAPORT, buf, count);
-
-	dma_start = jiffies;
-
-	while ((ei_inb(nic_base + EN0_ISR) & ENISR_RDC) == 0) {
-		if (jiffies - dma_start > 2 * HZ / 100) {		/* 20ms */
-			netdev_warn(dev, "timeout waiting for Tx RDC.\n");
-			ax_reset_8390(dev);
-			ax_NS8390_init(dev, 1);
-			break;
-		}
-	}
-
-	ei_outb(ENISR_RDC, nic_base + EN0_ISR);	/* Ack intr. */
-	ei_local->dmaing &= ~0x01;
-}
-
-/* definitions for accessing MII/EEPROM interface */
-
-#define AX_MEMR			EI_SHIFT(0x14)
-#define AX_MEMR_MDC		BIT(0)
-#define AX_MEMR_MDIR		BIT(1)
-#define AX_MEMR_MDI		BIT(2)
-#define AX_MEMR_MDO		BIT(3)
-#define AX_MEMR_EECS		BIT(4)
-#define AX_MEMR_EEI		BIT(5)
-#define AX_MEMR_EEO		BIT(6)
-#define AX_MEMR_EECLK		BIT(7)
-
-static void ax_handle_link_change(struct net_device *dev)
-{
-	struct ax_device  *ax = to_ax_dev(dev);
-	struct phy_device *phy_dev = ax->phy_dev;
-	int status_change = 0;
-
-	if (phy_dev->link && ((ax->speed != phy_dev->speed) ||
-			     (ax->duplex != phy_dev->duplex))) {
-
-		ax->speed = phy_dev->speed;
-		ax->duplex = phy_dev->duplex;
-		status_change = 1;
-	}
-
-	if (phy_dev->link != ax->link) {
-		if (!phy_dev->link) {
-			ax->speed = 0;
-			ax->duplex = -1;
-		}
-		ax->link = phy_dev->link;
-
-		status_change = 1;
-	}
-
-	if (status_change)
-		phy_print_status(phy_dev);
-}
-
-static int ax_mii_probe(struct net_device *dev)
-{
-	struct ax_device  *ax = to_ax_dev(dev);
-	struct phy_device *phy_dev = NULL;
-	int ret;
-
-	/* find the first phy */
-	phy_dev = phy_find_first(ax->mii_bus);
-	if (!phy_dev) {
-		netdev_err(dev, "no PHY found\n");
-		return -ENODEV;
-	}
-
-	ret = phy_connect_direct(dev, phy_dev, ax_handle_link_change, 0,
-				 PHY_INTERFACE_MODE_MII);
-	if (ret) {
-		netdev_err(dev, "Could not attach to PHY\n");
-		return ret;
-	}
-
-	/* mask with MAC supported features */
-	phy_dev->supported &= PHY_BASIC_FEATURES;
-	phy_dev->advertising = phy_dev->supported;
-
-	ax->phy_dev = phy_dev;
-
-	netdev_info(dev, "PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n",
-		    phy_dev->drv->name, dev_name(&phy_dev->dev), phy_dev->irq);
-
-	return 0;
-}
-
-static void ax_phy_switch(struct net_device *dev, int on)
-{
-	struct ei_device *ei_local = netdev_priv(dev);
-	struct ax_device *ax = to_ax_dev(dev);
-
-	u8 reg_gpoc =  ax->plat->gpoc_val;
-
-	if (!!on)
-		reg_gpoc &= ~AX_GPOC_PPDSET;
-	else
-		reg_gpoc |= AX_GPOC_PPDSET;
-
-	ei_outb(reg_gpoc, ei_local->mem + EI_SHIFT(0x17));
-}
-
-static int ax_open(struct net_device *dev)
-{
-	struct ax_device *ax = to_ax_dev(dev);
-	int ret;
-
-	netdev_dbg(dev, "open\n");
-
-	ret = request_irq(dev->irq, ax_ei_interrupt, ax->irqflags,
-			  dev->name, dev);
-	if (ret)
-		goto failed_request_irq;
-
-	/* turn the phy on (if turned off) */
-	ax_phy_switch(dev, 1);
-
-	ret = ax_mii_probe(dev);
-	if (ret)
-		goto failed_mii_probe;
-	phy_start(ax->phy_dev);
-
-	ret = ax_ei_open(dev);
-	if (ret)
-		goto failed_ax_ei_open;
-
-	ax->running = 1;
-
-	return 0;
-
- failed_ax_ei_open:
-	phy_disconnect(ax->phy_dev);
- failed_mii_probe:
-	ax_phy_switch(dev, 0);
-	free_irq(dev->irq, dev);
- failed_request_irq:
-	return ret;
-}
-
-static int ax_close(struct net_device *dev)
-{
-	struct ax_device *ax = to_ax_dev(dev);
-
-	netdev_dbg(dev, "close\n");
-
-	ax->running = 0;
-	wmb();
-
-	ax_ei_close(dev);
-
-	/* turn the phy off */
-	ax_phy_switch(dev, 0);
-	phy_disconnect(ax->phy_dev);
-
-	free_irq(dev->irq, dev);
-	return 0;
-}
-
-static int ax_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
-{
-	struct ax_device *ax = to_ax_dev(dev);
-	struct phy_device *phy_dev = ax->phy_dev;
-
-	if (!netif_running(dev))
-		return -EINVAL;
-
-	if (!phy_dev)
-		return -ENODEV;
-
-	return phy_mii_ioctl(phy_dev, req, cmd);
-}
-
-/* ethtool ops */
-
-static void ax_get_drvinfo(struct net_device *dev,
-			   struct ethtool_drvinfo *info)
-{
-	struct platform_device *pdev = to_platform_device(dev->dev.parent);
-
-	strcpy(info->driver, DRV_NAME);
-	strcpy(info->version, DRV_VERSION);
-	strcpy(info->bus_info, pdev->name);
-}
-
-static int ax_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-{
-	struct ax_device *ax = to_ax_dev(dev);
-	struct phy_device *phy_dev = ax->phy_dev;
-
-	if (!phy_dev)
-		return -ENODEV;
-
-	return phy_ethtool_gset(phy_dev, cmd);
-}
-
-static int ax_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-{
-	struct ax_device *ax = to_ax_dev(dev);
-	struct phy_device *phy_dev = ax->phy_dev;
-
-	if (!phy_dev)
-		return -ENODEV;
-
-	return phy_ethtool_sset(phy_dev, cmd);
-}
-
-static const struct ethtool_ops ax_ethtool_ops = {
-	.get_drvinfo		= ax_get_drvinfo,
-	.get_settings		= ax_get_settings,
-	.set_settings		= ax_set_settings,
-	.get_link		= ethtool_op_get_link,
-};
-
-#ifdef CONFIG_AX88796_93CX6
-static void ax_eeprom_register_read(struct eeprom_93cx6 *eeprom)
-{
-	struct ei_device *ei_local = eeprom->data;
-	u8 reg = ei_inb(ei_local->mem + AX_MEMR);
-
-	eeprom->reg_data_in = reg & AX_MEMR_EEI;
-	eeprom->reg_data_out = reg & AX_MEMR_EEO; /* Input pin */
-	eeprom->reg_data_clock = reg & AX_MEMR_EECLK;
-	eeprom->reg_chip_select = reg & AX_MEMR_EECS;
-}
-
-static void ax_eeprom_register_write(struct eeprom_93cx6 *eeprom)
-{
-	struct ei_device *ei_local = eeprom->data;
-	u8 reg = ei_inb(ei_local->mem + AX_MEMR);
-
-	reg &= ~(AX_MEMR_EEI | AX_MEMR_EECLK | AX_MEMR_EECS);
-
-	if (eeprom->reg_data_in)
-		reg |= AX_MEMR_EEI;
-	if (eeprom->reg_data_clock)
-		reg |= AX_MEMR_EECLK;
-	if (eeprom->reg_chip_select)
-		reg |= AX_MEMR_EECS;
-
-	ei_outb(reg, ei_local->mem + AX_MEMR);
-	udelay(10);
-}
-#endif
-
-static const struct net_device_ops ax_netdev_ops = {
-	.ndo_open		= ax_open,
-	.ndo_stop		= ax_close,
-	.ndo_do_ioctl		= ax_ioctl,
-
-	.ndo_start_xmit		= ax_ei_start_xmit,
-	.ndo_tx_timeout		= ax_ei_tx_timeout,
-	.ndo_get_stats		= ax_ei_get_stats,
-	.ndo_set_multicast_list = ax_ei_set_multicast_list,
-	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_mac_address	= eth_mac_addr,
-	.ndo_change_mtu		= eth_change_mtu,
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	.ndo_poll_controller	= ax_ei_poll,
-#endif
-};
-
-static void ax_bb_mdc(struct mdiobb_ctrl *ctrl, int level)
-{
-	struct ax_device *ax = container_of(ctrl, struct ax_device, bb_ctrl);
-
-	if (level)
-		ax->reg_memr |= AX_MEMR_MDC;
-	else
-		ax->reg_memr &= ~AX_MEMR_MDC;
-
-	ei_outb(ax->reg_memr, ax->addr_memr);
-}
-
-static void ax_bb_dir(struct mdiobb_ctrl *ctrl, int output)
-{
-	struct ax_device *ax = container_of(ctrl, struct ax_device, bb_ctrl);
-
-	if (output)
-		ax->reg_memr &= ~AX_MEMR_MDIR;
-	else
-		ax->reg_memr |= AX_MEMR_MDIR;
-
-	ei_outb(ax->reg_memr, ax->addr_memr);
-}
-
-static void ax_bb_set_data(struct mdiobb_ctrl *ctrl, int value)
-{
-	struct ax_device *ax = container_of(ctrl, struct ax_device, bb_ctrl);
-
-	if (value)
-		ax->reg_memr |= AX_MEMR_MDO;
-	else
-		ax->reg_memr &= ~AX_MEMR_MDO;
-
-	ei_outb(ax->reg_memr, ax->addr_memr);
-}
-
-static int ax_bb_get_data(struct mdiobb_ctrl *ctrl)
-{
-	struct ax_device *ax = container_of(ctrl, struct ax_device, bb_ctrl);
-	int reg_memr = ei_inb(ax->addr_memr);
-
-	return reg_memr & AX_MEMR_MDI ? 1 : 0;
-}
-
-static struct mdiobb_ops bb_ops = {
-	.owner = THIS_MODULE,
-	.set_mdc = ax_bb_mdc,
-	.set_mdio_dir = ax_bb_dir,
-	.set_mdio_data = ax_bb_set_data,
-	.get_mdio_data = ax_bb_get_data,
-};
-
-/* setup code */
-
-static int ax_mii_init(struct net_device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev->dev.parent);
-	struct ei_device *ei_local = netdev_priv(dev);
-	struct ax_device *ax = to_ax_dev(dev);
-	int err, i;
-
-	ax->bb_ctrl.ops = &bb_ops;
-	ax->addr_memr = ei_local->mem + AX_MEMR;
-	ax->mii_bus = alloc_mdio_bitbang(&ax->bb_ctrl);
-	if (!ax->mii_bus) {
-		err = -ENOMEM;
-		goto out;
-	}
-
-	ax->mii_bus->name = "ax88796_mii_bus";
-	ax->mii_bus->parent = dev->dev.parent;
-	snprintf(ax->mii_bus->id, MII_BUS_ID_SIZE, "%x", pdev->id);
-
-	ax->mii_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
-	if (!ax->mii_bus->irq) {
-		err = -ENOMEM;
-		goto out_free_mdio_bitbang;
-	}
-
-	for (i = 0; i < PHY_MAX_ADDR; i++)
-		ax->mii_bus->irq[i] = PHY_POLL;
-
-	err = mdiobus_register(ax->mii_bus);
-	if (err)
-		goto out_free_irq;
-
-	return 0;
-
- out_free_irq:
-	kfree(ax->mii_bus->irq);
- out_free_mdio_bitbang:
-	free_mdio_bitbang(ax->mii_bus);
- out:
-	return err;
-}
-
-static void ax_initial_setup(struct net_device *dev, struct ei_device *ei_local)
-{
-	void __iomem *ioaddr = ei_local->mem;
-	struct ax_device *ax = to_ax_dev(dev);
-
-	/* Select page 0 */
-	ei_outb(E8390_NODMA + E8390_PAGE0 + E8390_STOP, ioaddr + E8390_CMD);
-
-	/* set to byte access */
-	ei_outb(ax->plat->dcr_val & ~1, ioaddr + EN0_DCFG);
-	ei_outb(ax->plat->gpoc_val, ioaddr + EI_SHIFT(0x17));
-}
-
-/*
- * ax_init_dev
- *
- * initialise the specified device, taking care to note the MAC
- * address it may already have (if configured), ensure
- * the device is ready to be used by lib8390.c and registerd with
- * the network layer.
- */
-static int ax_init_dev(struct net_device *dev)
-{
-	struct ei_device *ei_local = netdev_priv(dev);
-	struct ax_device *ax = to_ax_dev(dev);
-	void __iomem *ioaddr = ei_local->mem;
-	unsigned int start_page;
-	unsigned int stop_page;
-	int ret;
-	int i;
-
-	ret = ax_initial_check(dev);
-	if (ret)
-		goto err_out;
-
-	/* setup goes here */
-
-	ax_initial_setup(dev, ei_local);
-
-	/* read the mac from the card prom if we need it */
-
-	if (ax->plat->flags & AXFLG_HAS_EEPROM) {
-		unsigned char SA_prom[32];
-
-		for (i = 0; i < sizeof(SA_prom); i += 2) {
-			SA_prom[i] = ei_inb(ioaddr + NE_DATAPORT);
-			SA_prom[i + 1] = ei_inb(ioaddr + NE_DATAPORT);
-		}
-
-		if (ax->plat->wordlength == 2)
-			for (i = 0; i < 16; i++)
-				SA_prom[i] = SA_prom[i+i];
-
-		memcpy(dev->dev_addr, SA_prom, 6);
-	}
-
-#ifdef CONFIG_AX88796_93CX6
-	if (ax->plat->flags & AXFLG_HAS_93CX6) {
-		unsigned char mac_addr[6];
-		struct eeprom_93cx6 eeprom;
-
-		eeprom.data = ei_local;
-		eeprom.register_read = ax_eeprom_register_read;
-		eeprom.register_write = ax_eeprom_register_write;
-		eeprom.width = PCI_EEPROM_WIDTH_93C56;
-
-		eeprom_93cx6_multiread(&eeprom, 0,
-				       (__le16 __force *)mac_addr,
-				       sizeof(mac_addr) >> 1);
-
-		memcpy(dev->dev_addr, mac_addr, 6);
-	}
-#endif
-	if (ax->plat->wordlength == 2) {
-		/* We must set the 8390 for word mode. */
-		ei_outb(ax->plat->dcr_val, ei_local->mem + EN0_DCFG);
-		start_page = NESM_START_PG;
-		stop_page = NESM_STOP_PG;
-	} else {
-		start_page = NE1SM_START_PG;
-		stop_page = NE1SM_STOP_PG;
-	}
-
-	/* load the mac-address from the device */
-	if (ax->plat->flags & AXFLG_MAC_FROMDEV) {
-		ei_outb(E8390_NODMA + E8390_PAGE1 + E8390_STOP,
-			ei_local->mem + E8390_CMD); /* 0x61 */
-		for (i = 0; i < ETHER_ADDR_LEN; i++)
-			dev->dev_addr[i] =
-				ei_inb(ioaddr + EN1_PHYS_SHIFT(i));
-	}
-
-	if ((ax->plat->flags & AXFLG_MAC_FROMPLATFORM) &&
-	    ax->plat->mac_addr)
-		memcpy(dev->dev_addr, ax->plat->mac_addr,
-		       ETHER_ADDR_LEN);
-
-	ax_reset_8390(dev);
-
-	ei_local->name = "AX88796";
-	ei_local->tx_start_page = start_page;
-	ei_local->stop_page = stop_page;
-	ei_local->word16 = (ax->plat->wordlength == 2);
-	ei_local->rx_start_page = start_page + TX_PAGES;
-
-#ifdef PACKETBUF_MEMSIZE
-	/* Allow the packet buffer size to be overridden by know-it-alls. */
-	ei_local->stop_page = ei_local->tx_start_page + PACKETBUF_MEMSIZE;
-#endif
-
-	ei_local->reset_8390 = &ax_reset_8390;
-	ei_local->block_input = &ax_block_input;
-	ei_local->block_output = &ax_block_output;
-	ei_local->get_8390_hdr = &ax_get_8390_hdr;
-	ei_local->priv = 0;
-
-	dev->netdev_ops = &ax_netdev_ops;
-	dev->ethtool_ops = &ax_ethtool_ops;
-
-	ret = ax_mii_init(dev);
-	if (ret)
-		goto out_irq;
-
-	ax_NS8390_init(dev, 0);
-
-	ret = register_netdev(dev);
-	if (ret)
-		goto out_irq;
-
-	netdev_info(dev, "%dbit, irq %d, %lx, MAC: %pM\n",
-		    ei_local->word16 ? 16 : 8, dev->irq, dev->base_addr,
-		    dev->dev_addr);
-
-	return 0;
-
- out_irq:
-	/* cleanup irq */
-	free_irq(dev->irq, dev);
- err_out:
-	return ret;
-}
-
-static int ax_remove(struct platform_device *pdev)
-{
-	struct net_device *dev = platform_get_drvdata(pdev);
-	struct ei_device *ei_local = netdev_priv(dev);
-	struct ax_device *ax = to_ax_dev(dev);
-	struct resource *mem;
-
-	unregister_netdev(dev);
-	free_irq(dev->irq, dev);
-
-	iounmap(ei_local->mem);
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(mem->start, resource_size(mem));
-
-	if (ax->map2) {
-		iounmap(ax->map2);
-		mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-		release_mem_region(mem->start, resource_size(mem));
-	}
-
-	free_netdev(dev);
-
-	return 0;
-}
-
-/*
- * ax_probe
- *
- * This is the entry point when the platform device system uses to
- * notify us of a new device to attach to. Allocate memory, find the
- * resources and information passed, and map the necessary registers.
- */
-static int ax_probe(struct platform_device *pdev)
-{
-	struct net_device *dev;
-	struct ei_device *ei_local;
-	struct ax_device *ax;
-	struct resource *irq, *mem, *mem2;
-	resource_size_t mem_size, mem2_size = 0;
-	int ret = 0;
-
-	dev = ax__alloc_ei_netdev(sizeof(struct ax_device));
-	if (dev == NULL)
-		return -ENOMEM;
-
-	/* ok, let's setup our device */
-	SET_NETDEV_DEV(dev, &pdev->dev);
-	ei_local = netdev_priv(dev);
-	ax = to_ax_dev(dev);
-
-	ax->plat = pdev->dev.platform_data;
-	platform_set_drvdata(pdev, dev);
-
-	ei_local->rxcr_base = ax->plat->rcr_val;
-
-	/* find the platform resources */
-	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (!irq) {
-		dev_err(&pdev->dev, "no IRQ specified\n");
-		ret = -ENXIO;
-		goto exit_mem;
-	}
-
-	dev->irq = irq->start;
-	ax->irqflags = irq->flags & IRQF_TRIGGER_MASK;
-
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!mem) {
-		dev_err(&pdev->dev, "no MEM specified\n");
-		ret = -ENXIO;
-		goto exit_mem;
-	}
-
-	mem_size = resource_size(mem);
-
-	/*
-	 * setup the register offsets from either the platform data or
-	 * by using the size of the resource provided
-	 */
-	if (ax->plat->reg_offsets)
-		ei_local->reg_offset = ax->plat->reg_offsets;
-	else {
-		ei_local->reg_offset = ax->reg_offsets;
-		for (ret = 0; ret < 0x18; ret++)
-			ax->reg_offsets[ret] = (mem_size / 0x18) * ret;
-	}
-
-	if (!request_mem_region(mem->start, mem_size, pdev->name)) {
-		dev_err(&pdev->dev, "cannot reserve registers\n");
-		ret = -ENXIO;
-		goto exit_mem;
-	}
-
-	ei_local->mem = ioremap(mem->start, mem_size);
-	dev->base_addr = (unsigned long)ei_local->mem;
-
-	if (ei_local->mem == NULL) {
-		dev_err(&pdev->dev, "Cannot ioremap area %pR\n", mem);
-
-		ret = -ENXIO;
-		goto exit_req;
-	}
-
-	/* look for reset area */
-	mem2 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	if (!mem2) {
-		if (!ax->plat->reg_offsets) {
-			for (ret = 0; ret < 0x20; ret++)
-				ax->reg_offsets[ret] = (mem_size / 0x20) * ret;
-		}
-	} else {
-		mem2_size = resource_size(mem2);
-
-		if (!request_mem_region(mem2->start, mem2_size, pdev->name)) {
-			dev_err(&pdev->dev, "cannot reserve registers\n");
-			ret = -ENXIO;
-			goto exit_mem1;
-		}
-
-		ax->map2 = ioremap(mem2->start, mem2_size);
-		if (!ax->map2) {
-			dev_err(&pdev->dev, "cannot map reset register\n");
-			ret = -ENXIO;
-			goto exit_mem2;
-		}
-
-		ei_local->reg_offset[0x1f] = ax->map2 - ei_local->mem;
-	}
-
-	/* got resources, now initialise and register device */
-	ret = ax_init_dev(dev);
-	if (!ret)
-		return 0;
-
-	if (!ax->map2)
-		goto exit_mem1;
-
-	iounmap(ax->map2);
-
- exit_mem2:
-	release_mem_region(mem2->start, mem2_size);
-
- exit_mem1:
-	iounmap(ei_local->mem);
-
- exit_req:
-	release_mem_region(mem->start, mem_size);
-
- exit_mem:
-	free_netdev(dev);
-
-	return ret;
-}
-
-/* suspend and resume */
-
-#ifdef CONFIG_PM
-static int ax_suspend(struct platform_device *dev, pm_message_t state)
-{
-	struct net_device *ndev = platform_get_drvdata(dev);
-	struct ax_device *ax = to_ax_dev(ndev);
-
-	ax->resume_open = ax->running;
-
-	netif_device_detach(ndev);
-	ax_close(ndev);
-
-	return 0;
-}
-
-static int ax_resume(struct platform_device *pdev)
-{
-	struct net_device *ndev = platform_get_drvdata(pdev);
-	struct ax_device *ax = to_ax_dev(ndev);
-
-	ax_initial_setup(ndev, netdev_priv(ndev));
-	ax_NS8390_init(ndev, ax->resume_open);
-	netif_device_attach(ndev);
-
-	if (ax->resume_open)
-		ax_open(ndev);
-
-	return 0;
-}
-
-#else
-#define ax_suspend NULL
-#define ax_resume NULL
-#endif
-
-static struct platform_driver axdrv = {
-	.driver	= {
-		.name		= "ax88796",
-		.owner		= THIS_MODULE,
-	},
-	.probe		= ax_probe,
-	.remove		= ax_remove,
-	.suspend	= ax_suspend,
-	.resume		= ax_resume,
-};
-
-static int __init axdrv_init(void)
-{
-	return platform_driver_register(&axdrv);
-}
-
-static void __exit axdrv_exit(void)
-{
-	platform_driver_unregister(&axdrv);
-}
-
-module_init(axdrv_init);
-module_exit(axdrv_exit);
-
-MODULE_DESCRIPTION("AX88796 10/100 Ethernet platform driver");
-MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:ax88796");