net: benet: convert to hw_features

Simple conversion.

This also fixes a bug in TX checksum toggling --- driver was changing
NETIF_F_HW_CSUM instead of NETIF_F_IP_CSUM+NETIF_F_IPV6_CSUM.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

3 files changed, 10 insertions, 37 deletions

diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h
index d2c42f5d5e9..a0b4743d722 100644
--- a/drivers/net/benet/be.h
+++ b/drivers/net/benet/be.h
@@ -307,7 +307,6 @@ struct be_adapter {
 	u16 work_counter;
 
 	/* Ethtool knobs and info */
-	bool rx_csum; 		/* BE card must perform rx-checksumming */
 	char fw_ver[FW_VER_LEN];
 	u32 if_handle;		/* Used to configure filtering */
 	u32 pmac_id;		/* MAC addr handle used by BE card */
diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c
index 1565c81ff96..96f5502e0ef 100644
--- a/drivers/net/benet/be_ethtool.c
+++ b/drivers/net/benet/be_ethtool.c
@@ -261,25 +261,6 @@ be_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *coalesce)
 	return 0;
 }
 
-static u32 be_get_rx_csum(struct net_device *netdev)
-{
-	struct be_adapter *adapter = netdev_priv(netdev);
-
-	return adapter->rx_csum;
-}
-
-static int be_set_rx_csum(struct net_device *netdev, uint32_t data)
-{
-	struct be_adapter *adapter = netdev_priv(netdev);
-
-	if (data)
-		adapter->rx_csum = true;
-	else
-		adapter->rx_csum = false;
-
-	return 0;
-}
-
 static void
 be_get_ethtool_stats(struct net_device *netdev,
 		struct ethtool_stats *stats, uint64_t *data)
@@ -760,14 +741,6 @@ const struct ethtool_ops be_ethtool_ops = {
 	.get_ringparam = be_get_ringparam,
 	.get_pauseparam = be_get_pauseparam,
 	.set_pauseparam = be_set_pauseparam,
-	.get_rx_csum = be_get_rx_csum,
-	.set_rx_csum = be_set_rx_csum,
-	.get_tx_csum = ethtool_op_get_tx_csum,
-	.set_tx_csum = ethtool_op_set_tx_hw_csum,
-	.get_sg = ethtool_op_get_sg,
-	.set_sg = ethtool_op_set_sg,
-	.get_tso = ethtool_op_get_tso,
-	.set_tso = ethtool_op_set_tso,
 	.get_strings = be_get_stat_strings,
 	.set_phys_id = be_set_phys_id,
 	.get_sset_count = be_get_sset_count,
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index b8831403400..58a652f8186 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -988,9 +988,10 @@ static void be_rx_compl_process(struct be_adapter *adapter,
 			struct be_rx_obj *rxo,
 			struct be_rx_compl_info *rxcp)
 {
+	struct net_device *netdev = adapter->netdev;
 	struct sk_buff *skb;
 
-	skb = netdev_alloc_skb_ip_align(adapter->netdev, BE_HDR_LEN);
+	skb = netdev_alloc_skb_ip_align(netdev, BE_HDR_LEN);
 	if (unlikely(!skb)) {
 		if (net_ratelimit())
 			dev_warn(&adapter->pdev->dev, "skb alloc failed\n");
@@ -1000,13 +1001,13 @@ static void be_rx_compl_process(struct be_adapter *adapter,
 
 	skb_fill_rx_data(adapter, rxo, skb, rxcp);
 
-	if (likely(adapter->rx_csum && csum_passed(rxcp)))
+	if (likely((netdev->features & NETIF_F_RXCSUM) && csum_passed(rxcp)))
 		skb->ip_summed = CHECKSUM_UNNECESSARY;
 	else
 		skb_checksum_none_assert(skb);
 
 	skb->truesize = skb->len + sizeof(struct sk_buff);
-	skb->protocol = eth_type_trans(skb, adapter->netdev);
+	skb->protocol = eth_type_trans(skb, netdev);
 	if (adapter->netdev->features & NETIF_F_RXHASH)
 		skb->rxhash = rxcp->rss_hash;
 
@@ -2627,10 +2628,12 @@ static void be_netdev_init(struct net_device *netdev)
 	struct be_rx_obj *rxo;
 	int i;
 
-	netdev->features |= NETIF_F_SG | NETIF_F_HW_VLAN_RX | NETIF_F_TSO |
-		NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER |
-		NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
-		NETIF_F_GRO | NETIF_F_TSO6;
+	netdev->hw_features |= NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 |
+		NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | NETIF_F_RXCSUM;
+
+	netdev->features |= netdev->hw_features |
+		NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX |
+		NETIF_F_HW_VLAN_FILTER;
 
 	if (be_multi_rxq(adapter))
 		netdev->features |= NETIF_F_RXHASH;
@@ -2643,8 +2646,6 @@ static void be_netdev_init(struct net_device *netdev)
 
 	netdev->flags |= IFF_MULTICAST;
 
-	adapter->rx_csum = true;
-
 	/* Default settings for Rx and Tx flow control */
 	adapter->rx_fc = true;
 	adapter->tx_fc = true;