bna: Brocade 10Gb Ethernet device driver

This is patch 1/6 which contains linux driver source for
Brocade's BR1010/BR1020 10Gb CEE capable ethernet adapter.

Signed-off-by: Debashis Dutt <ddutt@brocade.com>
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 1491 insertions, 0 deletions

diff --git a/drivers/net/bna/bna_hw.h b/drivers/net/bna/bna_hw.h
new file mode 100644
index 00000000000..67eb376c5c7
--- /dev/null
+++ b/drivers/net/bna/bna_hw.h
@@ -0,0 +1,1491 @@
+/*
+ * Linux network driver for Brocade Converged Network Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+/*
+ * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * File for interrupt macros and functions
+ */
+
+#ifndef __BNA_HW_H__
+#define __BNA_HW_H__
+
+#include "bfi_ctreg.h"
+
+/**
+ *
+ * SW imposed limits
+ *
+ */
+
+#ifndef BNA_BIOS_BUILD
+
+#define BFI_MAX_TXQ			64
+#define BFI_MAX_RXQ			64
+#define	BFI_MAX_RXF			64
+#define BFI_MAX_IB			128
+#define	BFI_MAX_RIT_SIZE		256
+#define	BFI_RSS_RIT_SIZE		64
+#define	BFI_NONRSS_RIT_SIZE		1
+#define BFI_MAX_UCMAC			256
+#define BFI_MAX_MCMAC			512
+#define BFI_IBIDX_SIZE			4
+#define BFI_MAX_VLAN			4095
+
+/**
+ * There are 2 free IB index pools:
+ *	pool1: 120 segments of 1 index each
+ *	pool8: 1 segment of 8 indexes
+ */
+#define BFI_IBIDX_POOL1_SIZE		116
+#define	BFI_IBIDX_POOL1_ENTRY_SIZE	1
+#define BFI_IBIDX_POOL2_SIZE		2
+#define	BFI_IBIDX_POOL2_ENTRY_SIZE	2
+#define	BFI_IBIDX_POOL8_SIZE		1
+#define	BFI_IBIDX_POOL8_ENTRY_SIZE	8
+#define	BFI_IBIDX_TOTAL_POOLS		3
+#define	BFI_IBIDX_TOTAL_SEGS		119 /* (POOL1 + POOL2 + POOL8)_SIZE */
+#define	BFI_IBIDX_MAX_SEGSIZE		8
+#define init_ibidx_pool(name)						\
+static struct bna_ibidx_pool name[BFI_IBIDX_TOTAL_POOLS] =		\
+{									\
+	{ BFI_IBIDX_POOL1_SIZE, BFI_IBIDX_POOL1_ENTRY_SIZE },		\
+	{ BFI_IBIDX_POOL2_SIZE, BFI_IBIDX_POOL2_ENTRY_SIZE },		\
+	{ BFI_IBIDX_POOL8_SIZE, BFI_IBIDX_POOL8_ENTRY_SIZE }		\
+}
+
+/**
+ * There are 2 free RIT segment pools:
+ * 	Pool1: 192 segments of 1 RIT entry each
+ *	Pool2: 1 segment of 64 RIT entry
+ */
+#define BFI_RIT_SEG_POOL1_SIZE		192
+#define BFI_RIT_SEG_POOL1_ENTRY_SIZE	1
+#define BFI_RIT_SEG_POOLRSS_SIZE	1
+#define BFI_RIT_SEG_POOLRSS_ENTRY_SIZE	64
+#define BFI_RIT_SEG_TOTAL_POOLS		2
+#define BFI_RIT_TOTAL_SEGS		193 /* POOL1_SIZE + POOLRSS_SIZE */
+#define init_ritseg_pool(name)						\
+static struct bna_ritseg_pool_cfg name[BFI_RIT_SEG_TOTAL_POOLS] =	\
+{									\
+	{ BFI_RIT_SEG_POOL1_SIZE, BFI_RIT_SEG_POOL1_ENTRY_SIZE },	\
+	{ BFI_RIT_SEG_POOLRSS_SIZE, BFI_RIT_SEG_POOLRSS_ENTRY_SIZE }	\
+}
+
+#else /* BNA_BIOS_BUILD */
+
+#define BFI_MAX_TXQ			1
+#define BFI_MAX_RXQ			1
+#define	BFI_MAX_RXF			1
+#define BFI_MAX_IB			2
+#define	BFI_MAX_RIT_SIZE		2
+#define	BFI_RSS_RIT_SIZE		64
+#define	BFI_NONRSS_RIT_SIZE		1
+#define BFI_MAX_UCMAC			1
+#define BFI_MAX_MCMAC			8
+#define BFI_IBIDX_SIZE			4
+#define BFI_MAX_VLAN			4095
+/* There is one free pool: 2 segments of 1 index each */
+#define BFI_IBIDX_POOL1_SIZE		2
+#define	BFI_IBIDX_POOL1_ENTRY_SIZE	1
+#define	BFI_IBIDX_TOTAL_POOLS		1
+#define	BFI_IBIDX_TOTAL_SEGS		2 /* POOL1_SIZE */
+#define	BFI_IBIDX_MAX_SEGSIZE		1
+#define init_ibidx_pool(name)						\
+static struct bna_ibidx_pool name[BFI_IBIDX_TOTAL_POOLS] =		\
+{									\
+	{ BFI_IBIDX_POOL1_SIZE, BFI_IBIDX_POOL1_ENTRY_SIZE }		\
+}
+
+#define BFI_RIT_SEG_POOL1_SIZE		1
+#define BFI_RIT_SEG_POOL1_ENTRY_SIZE	1
+#define BFI_RIT_SEG_TOTAL_POOLS		1
+#define BFI_RIT_TOTAL_SEGS		1 /* POOL1_SIZE */
+#define init_ritseg_pool(name)						\
+static struct bna_ritseg_pool_cfg name[BFI_RIT_SEG_TOTAL_POOLS] =	\
+{									\
+	{ BFI_RIT_SEG_POOL1_SIZE, BFI_RIT_SEG_POOL1_ENTRY_SIZE }	\
+}
+
+#endif /* BNA_BIOS_BUILD */
+
+#define BFI_RSS_HASH_KEY_LEN		10
+
+#define BFI_COALESCING_TIMER_UNIT	5	/* 5us */
+#define BFI_MAX_COALESCING_TIMEO	0xFF	/* in 5us units */
+#define BFI_MAX_INTERPKT_COUNT		0xFF
+#define BFI_MAX_INTERPKT_TIMEO		0xF	/* in 0.5us units */
+#define BFI_TX_COALESCING_TIMEO		20	/* 20 * 5 = 100us */
+#define BFI_TX_INTERPKT_COUNT		32
+#define	BFI_RX_COALESCING_TIMEO		12	/* 12 * 5 = 60us */
+#define	BFI_RX_INTERPKT_COUNT		6	/* Pkt Cnt = 6 */
+#define	BFI_RX_INTERPKT_TIMEO		3	/* 3 * 0.5 = 1.5us */
+
+#define BFI_TXQ_WI_SIZE			64	/* bytes */
+#define BFI_RXQ_WI_SIZE			8	/* bytes */
+#define BFI_CQ_WI_SIZE			16	/* bytes */
+#define BFI_TX_MAX_WRR_QUOTA		0xFFF
+
+#define BFI_TX_MAX_VECTORS_PER_WI	4
+#define BFI_TX_MAX_VECTORS_PER_PKT	0xFF
+#define BFI_TX_MAX_DATA_PER_VECTOR	0xFFFF
+#define BFI_TX_MAX_DATA_PER_PKT		0xFFFFFF
+
+/* Small Q buffer size */
+#define BFI_SMALL_RXBUF_SIZE		128
+
+/* Defined separately since BFA_FLASH_DMA_BUF_SZ is in bfa_flash.c */
+#define BFI_FLASH_DMA_BUF_SZ		0x010000 /* 64K DMA */
+#define BFI_HW_STATS_SIZE		0x4000 /* 16K DMA */
+
+/**
+ *
+ * HW register offsets, macros
+ *
+ */
+
+/* DMA Block Register Host Window Start Address */
+#define DMA_BLK_REG_ADDR		0x00013000
+
+/* DMA Block Internal Registers */
+#define DMA_CTRL_REG0			(DMA_BLK_REG_ADDR + 0x000)
+#define DMA_CTRL_REG1			(DMA_BLK_REG_ADDR + 0x004)
+#define DMA_ERR_INT_STATUS		(DMA_BLK_REG_ADDR + 0x008)
+#define DMA_ERR_INT_ENABLE		(DMA_BLK_REG_ADDR + 0x00c)
+#define DMA_ERR_INT_STATUS_SET		(DMA_BLK_REG_ADDR + 0x010)
+
+/* APP Block Register Address Offset from BAR0 */
+#define APP_BLK_REG_ADDR		0x00014000
+
+/* Host Function Interrupt Mask Registers */
+#define HOSTFN0_INT_MASK		(APP_BLK_REG_ADDR + 0x004)
+#define HOSTFN1_INT_MASK		(APP_BLK_REG_ADDR + 0x104)
+#define HOSTFN2_INT_MASK		(APP_BLK_REG_ADDR + 0x304)
+#define HOSTFN3_INT_MASK		(APP_BLK_REG_ADDR + 0x404)
+
+/**
+ * Host Function PCIe Error Registers
+ * Duplicates "Correctable" & "Uncorrectable"
+ * registers in PCIe Config space.
+ */
+#define FN0_PCIE_ERR_REG		(APP_BLK_REG_ADDR + 0x014)
+#define FN1_PCIE_ERR_REG		(APP_BLK_REG_ADDR + 0x114)
+#define FN2_PCIE_ERR_REG		(APP_BLK_REG_ADDR + 0x314)
+#define FN3_PCIE_ERR_REG		(APP_BLK_REG_ADDR + 0x414)
+
+/* Host Function Error Type Status Registers */
+#define FN0_ERR_TYPE_STATUS_REG		(APP_BLK_REG_ADDR + 0x018)
+#define FN1_ERR_TYPE_STATUS_REG		(APP_BLK_REG_ADDR + 0x118)
+#define FN2_ERR_TYPE_STATUS_REG		(APP_BLK_REG_ADDR + 0x318)
+#define FN3_ERR_TYPE_STATUS_REG		(APP_BLK_REG_ADDR + 0x418)
+
+/* Host Function Error Type Mask Registers */
+#define FN0_ERR_TYPE_MSK_STATUS_REG	(APP_BLK_REG_ADDR + 0x01c)
+#define FN1_ERR_TYPE_MSK_STATUS_REG	(APP_BLK_REG_ADDR + 0x11c)
+#define FN2_ERR_TYPE_MSK_STATUS_REG	(APP_BLK_REG_ADDR + 0x31c)
+#define FN3_ERR_TYPE_MSK_STATUS_REG	(APP_BLK_REG_ADDR + 0x41c)
+
+/* Catapult Host Semaphore Status Registers (App block) */
+#define HOST_SEM_STS0_REG		(APP_BLK_REG_ADDR + 0x630)
+#define HOST_SEM_STS1_REG		(APP_BLK_REG_ADDR + 0x634)
+#define HOST_SEM_STS2_REG		(APP_BLK_REG_ADDR + 0x638)
+#define HOST_SEM_STS3_REG		(APP_BLK_REG_ADDR + 0x63c)
+#define HOST_SEM_STS4_REG		(APP_BLK_REG_ADDR + 0x640)
+#define HOST_SEM_STS5_REG		(APP_BLK_REG_ADDR + 0x644)
+#define HOST_SEM_STS6_REG		(APP_BLK_REG_ADDR + 0x648)
+#define HOST_SEM_STS7_REG		(APP_BLK_REG_ADDR + 0x64c)
+
+/* PCIe Misc Register */
+#define PCIE_MISC_REG			(APP_BLK_REG_ADDR + 0x200)
+
+/* Temp Sensor Control Registers */
+#define TEMPSENSE_CNTL_REG		(APP_BLK_REG_ADDR + 0x250)
+#define TEMPSENSE_STAT_REG		(APP_BLK_REG_ADDR + 0x254)
+
+/* APP Block local error registers */
+#define APP_LOCAL_ERR_STAT		(APP_BLK_REG_ADDR + 0x258)
+#define APP_LOCAL_ERR_MSK		(APP_BLK_REG_ADDR + 0x25c)
+
+/* PCIe Link Error registers */
+#define PCIE_LNK_ERR_STAT		(APP_BLK_REG_ADDR + 0x260)
+#define PCIE_LNK_ERR_MSK		(APP_BLK_REG_ADDR + 0x264)
+
+/**
+ * FCoE/FIP Ethertype Register
+ * 31:16 -- Chip wide value for FIP type
+ * 15:0  -- Chip wide value for FCoE type
+ */
+#define FCOE_FIP_ETH_TYPE		(APP_BLK_REG_ADDR + 0x280)
+
+/**
+ * Reserved Ethertype Register
+ * 31:16 -- Reserved
+ * 15:0  -- Other ethertype
+ */
+#define RESV_ETH_TYPE			(APP_BLK_REG_ADDR + 0x284)
+
+/**
+ * Host Command Status Registers
+ * Each set consists of 3 registers :
+ * clear, set, cmd
+ * 16 such register sets in all
+ * See catapult_spec.pdf for detailed functionality
+ * Put each type in a single macro accessed by _num ?
+ */
+#define HOST_CMDSTS0_CLR_REG		(APP_BLK_REG_ADDR + 0x500)
+#define HOST_CMDSTS0_SET_REG		(APP_BLK_REG_ADDR + 0x504)
+#define HOST_CMDSTS0_REG		(APP_BLK_REG_ADDR + 0x508)
+#define HOST_CMDSTS1_CLR_REG		(APP_BLK_REG_ADDR + 0x510)
+#define HOST_CMDSTS1_SET_REG		(APP_BLK_REG_ADDR + 0x514)
+#define HOST_CMDSTS1_REG		(APP_BLK_REG_ADDR + 0x518)
+#define HOST_CMDSTS2_CLR_REG		(APP_BLK_REG_ADDR + 0x520)
+#define HOST_CMDSTS2_SET_REG		(APP_BLK_REG_ADDR + 0x524)
+#define HOST_CMDSTS2_REG		(APP_BLK_REG_ADDR + 0x528)
+#define HOST_CMDSTS3_CLR_REG		(APP_BLK_REG_ADDR + 0x530)
+#define HOST_CMDSTS3_SET_REG		(APP_BLK_REG_ADDR + 0x534)
+#define HOST_CMDSTS3_REG		(APP_BLK_REG_ADDR + 0x538)
+#define HOST_CMDSTS4_CLR_REG		(APP_BLK_REG_ADDR + 0x540)
+#define HOST_CMDSTS4_SET_REG		(APP_BLK_REG_ADDR + 0x544)
+#define HOST_CMDSTS4_REG		(APP_BLK_REG_ADDR + 0x548)
+#define HOST_CMDSTS5_CLR_REG		(APP_BLK_REG_ADDR + 0x550)
+#define HOST_CMDSTS5_SET_REG		(APP_BLK_REG_ADDR + 0x554)
+#define HOST_CMDSTS5_REG		(APP_BLK_REG_ADDR + 0x558)
+#define HOST_CMDSTS6_CLR_REG		(APP_BLK_REG_ADDR + 0x560)
+#define HOST_CMDSTS6_SET_REG		(APP_BLK_REG_ADDR + 0x564)
+#define HOST_CMDSTS6_REG		(APP_BLK_REG_ADDR + 0x568)
+#define HOST_CMDSTS7_CLR_REG		(APP_BLK_REG_ADDR + 0x570)
+#define HOST_CMDSTS7_SET_REG		(APP_BLK_REG_ADDR + 0x574)
+#define HOST_CMDSTS7_REG		(APP_BLK_REG_ADDR + 0x578)
+#define HOST_CMDSTS8_CLR_REG		(APP_BLK_REG_ADDR + 0x580)
+#define HOST_CMDSTS8_SET_REG		(APP_BLK_REG_ADDR + 0x584)
+#define HOST_CMDSTS8_REG		(APP_BLK_REG_ADDR + 0x588)
+#define HOST_CMDSTS9_CLR_REG		(APP_BLK_REG_ADDR + 0x590)
+#define HOST_CMDSTS9_SET_REG		(APP_BLK_REG_ADDR + 0x594)
+#define HOST_CMDSTS9_REG		(APP_BLK_REG_ADDR + 0x598)
+#define HOST_CMDSTS10_CLR_REG		(APP_BLK_REG_ADDR + 0x5A0)
+#define HOST_CMDSTS10_SET_REG		(APP_BLK_REG_ADDR + 0x5A4)
+#define HOST_CMDSTS10_REG		(APP_BLK_REG_ADDR + 0x5A8)
+#define HOST_CMDSTS11_CLR_REG		(APP_BLK_REG_ADDR + 0x5B0)
+#define HOST_CMDSTS11_SET_REG		(APP_BLK_REG_ADDR + 0x5B4)
+#define HOST_CMDSTS11_REG		(APP_BLK_REG_ADDR + 0x5B8)
+#define HOST_CMDSTS12_CLR_REG		(APP_BLK_REG_ADDR + 0x5C0)
+#define HOST_CMDSTS12_SET_REG		(APP_BLK_REG_ADDR + 0x5C4)
+#define HOST_CMDSTS12_REG		(APP_BLK_REG_ADDR + 0x5C8)
+#define HOST_CMDSTS13_CLR_REG		(APP_BLK_REG_ADDR + 0x5D0)
+#define HOST_CMDSTS13_SET_REG		(APP_BLK_REG_ADDR + 0x5D4)
+#define HOST_CMDSTS13_REG		(APP_BLK_REG_ADDR + 0x5D8)
+#define HOST_CMDSTS14_CLR_REG		(APP_BLK_REG_ADDR + 0x5E0)
+#define HOST_CMDSTS14_SET_REG		(APP_BLK_REG_ADDR + 0x5E4)
+#define HOST_CMDSTS14_REG		(APP_BLK_REG_ADDR + 0x5E8)
+#define HOST_CMDSTS15_CLR_REG		(APP_BLK_REG_ADDR + 0x5F0)
+#define HOST_CMDSTS15_SET_REG		(APP_BLK_REG_ADDR + 0x5F4)
+#define HOST_CMDSTS15_REG		(APP_BLK_REG_ADDR + 0x5F8)
+
+/**
+ * LPU0 Block Register Address Offset from BAR0
+ * Range 0x18000 - 0x18033
+ */
+#define LPU0_BLK_REG_ADDR		0x00018000
+
+/**
+ * LPU0 Registers
+ * Should they be directly used from host,
+ * except for diagnostics ?
+ * CTL_REG : Control register
+ * CMD_REG : Triggers exec. of cmd. in
+ *           Mailbox memory
+ */
+#define LPU0_MBOX_CTL_REG		(LPU0_BLK_REG_ADDR + 0x000)
+#define LPU0_MBOX_CMD_REG		(LPU0_BLK_REG_ADDR + 0x004)
+#define LPU0_MBOX_LINK_0REG		(LPU0_BLK_REG_ADDR + 0x008)
+#define LPU1_MBOX_LINK_0REG		(LPU0_BLK_REG_ADDR + 0x00c)
+#define LPU0_MBOX_STATUS_0REG		(LPU0_BLK_REG_ADDR + 0x010)
+#define LPU1_MBOX_STATUS_0REG		(LPU0_BLK_REG_ADDR + 0x014)
+#define LPU0_ERR_STATUS_REG		(LPU0_BLK_REG_ADDR + 0x018)
+#define LPU0_ERR_SET_REG		(LPU0_BLK_REG_ADDR + 0x020)
+
+/**
+ * LPU1 Block Register Address Offset from BAR0
+ * Range 0x18400 - 0x18433
+ */
+#define LPU1_BLK_REG_ADDR		0x00018400
+
+/**
+ * LPU1 Registers
+ * Same as LPU0 registers above
+ */
+#define LPU1_MBOX_CTL_REG		(LPU1_BLK_REG_ADDR + 0x000)
+#define LPU1_MBOX_CMD_REG		(LPU1_BLK_REG_ADDR + 0x004)
+#define LPU0_MBOX_LINK_1REG		(LPU1_BLK_REG_ADDR + 0x008)
+#define LPU1_MBOX_LINK_1REG		(LPU1_BLK_REG_ADDR + 0x00c)
+#define LPU0_MBOX_STATUS_1REG		(LPU1_BLK_REG_ADDR + 0x010)
+#define LPU1_MBOX_STATUS_1REG		(LPU1_BLK_REG_ADDR + 0x014)
+#define LPU1_ERR_STATUS_REG		(LPU1_BLK_REG_ADDR + 0x018)
+#define LPU1_ERR_SET_REG		(LPU1_BLK_REG_ADDR + 0x020)
+
+/**
+ * PSS Block Register Address Offset from BAR0
+ * Range 0x18800 - 0x188DB
+ */
+#define PSS_BLK_REG_ADDR		0x00018800
+
+/**
+ * PSS Registers
+ * For details, see catapult_spec.pdf
+ * ERR_STATUS_REG : Indicates error in PSS module
+ * RAM_ERR_STATUS_REG : Indicates RAM module that detected error
+ */
+#define ERR_STATUS_SET			(PSS_BLK_REG_ADDR + 0x018)
+#define PSS_RAM_ERR_STATUS_REG		(PSS_BLK_REG_ADDR + 0x01C)
+
+/**
+ * PSS Semaphore Lock Registers, total 16
+ * First read when unlocked returns 0,
+ * and is set to 1, atomically.
+ * Subsequent reads returns 1.
+ * To clear set the value to 0.
+ * Range : 0x20 to 0x5c
+ */
+#define PSS_SEM_LOCK_REG(_num) 		\
+	(PSS_BLK_REG_ADDR + 0x020 + ((_num) << 2))
+
+/**
+ * PSS Semaphore Status Registers,
+ * corresponding to the lock registers above
+ */
+#define PSS_SEM_STATUS_REG(_num) 		\
+	(PSS_BLK_REG_ADDR + 0x060 + ((_num) << 2))
+
+/**
+ * Catapult CPQ Registers
+ * Defines for Mailbox Registers
+ * Used to send mailbox commands to firmware from
+ * host. The data part is written to the MBox
+ * memory, registers are used to indicate that
+ * a commnad is resident in memory.
+ *
+ * Note : LPU0<->LPU1 mailboxes are not listed here
+ */
+#define CPQ_BLK_REG_ADDR		0x00019000
+
+#define HOSTFN0_LPU0_MBOX1_CMD_STAT	(CPQ_BLK_REG_ADDR + 0x130)
+#define HOSTFN0_LPU1_MBOX1_CMD_STAT	(CPQ_BLK_REG_ADDR + 0x134)
+#define LPU0_HOSTFN0_MBOX1_CMD_STAT	(CPQ_BLK_REG_ADDR + 0x138)
+#define LPU1_HOSTFN0_MBOX1_CMD_STAT	(CPQ_BLK_REG_ADDR + 0x13C)
+
+#define HOSTFN1_LPU0_MBOX1_CMD_STAT	(CPQ_BLK_REG_ADDR + 0x140)
+#define HOSTFN1_LPU1_MBOX1_CMD_STAT	(CPQ_BLK_REG_ADDR + 0x144)
+#define LPU0_HOSTFN1_MBOX1_CMD_STAT	(CPQ_BLK_REG_ADDR + 0x148)
+#define LPU1_HOSTFN1_MBOX1_CMD_STAT	(CPQ_BLK_REG_ADDR + 0x14C)
+
+#define HOSTFN2_LPU0_MBOX1_CMD_STAT	(CPQ_BLK_REG_ADDR + 0x170)
+#define HOSTFN2_LPU1_MBOX1_CMD_STAT	(CPQ_BLK_REG_ADDR + 0x174)
+#define LPU0_HOSTFN2_MBOX1_CMD_STAT	(CPQ_BLK_REG_ADDR + 0x178)
+#define LPU1_HOSTFN2_MBOX1_CMD_STAT	(CPQ_BLK_REG_ADDR + 0x17C)
+
+#define HOSTFN3_LPU0_MBOX1_CMD_STAT	(CPQ_BLK_REG_ADDR + 0x180)
+#define HOSTFN3_LPU1_MBOX1_CMD_STAT	(CPQ_BLK_REG_ADDR + 0x184)
+#define LPU0_HOSTFN3_MBOX1_CMD_STAT	(CPQ_BLK_REG_ADDR + 0x188)
+#define LPU1_HOSTFN3_MBOX1_CMD_STAT	(CPQ_BLK_REG_ADDR + 0x18C)
+
+/* Host Function Force Parity Error Registers */
+#define HOSTFN0_LPU_FORCE_PERR		(CPQ_BLK_REG_ADDR + 0x120)
+#define HOSTFN1_LPU_FORCE_PERR		(CPQ_BLK_REG_ADDR + 0x124)
+#define HOSTFN2_LPU_FORCE_PERR		(CPQ_BLK_REG_ADDR + 0x128)
+#define HOSTFN3_LPU_FORCE_PERR		(CPQ_BLK_REG_ADDR + 0x12C)
+
+/* LL Port[0|1] Halt Mask Registers */
+#define LL_HALT_MSK_P0			(CPQ_BLK_REG_ADDR + 0x1A0)
+#define LL_HALT_MSK_P1			(CPQ_BLK_REG_ADDR + 0x1B0)
+
+/* LL Port[0|1] Error Mask Registers */
+#define LL_ERR_MSK_P0			(CPQ_BLK_REG_ADDR + 0x1D0)
+#define LL_ERR_MSK_P1			(CPQ_BLK_REG_ADDR + 0x1D4)
+
+/* EMC FLI (Flash Controller) Block Register Address Offset from BAR0 */
+#define FLI_BLK_REG_ADDR		0x0001D000
+
+/* EMC FLI Registers */
+#define FLI_CMD_REG			(FLI_BLK_REG_ADDR + 0x000)
+#define FLI_ADDR_REG			(FLI_BLK_REG_ADDR + 0x004)
+#define FLI_CTL_REG			(FLI_BLK_REG_ADDR + 0x008)
+#define FLI_WRDATA_REG			(FLI_BLK_REG_ADDR + 0x00C)
+#define FLI_RDDATA_REG			(FLI_BLK_REG_ADDR + 0x010)
+#define FLI_DEV_STATUS_REG		(FLI_BLK_REG_ADDR + 0x014)
+#define FLI_SIG_WD_REG			(FLI_BLK_REG_ADDR + 0x018)
+
+/**
+ * RO register
+ * 31:16 -- Vendor Id
+ * 15:0  -- Device Id
+ */
+#define FLI_DEV_VENDOR_REG		(FLI_BLK_REG_ADDR + 0x01C)
+#define FLI_ERR_STATUS_REG		(FLI_BLK_REG_ADDR + 0x020)
+
+/**
+ * RAD (RxAdm) Block Register Address Offset from BAR0
+ * RAD0 Range : 0x20000 - 0x203FF
+ * RAD1 Range : 0x20400 - 0x207FF
+ */
+#define RAD0_BLK_REG_ADDR		0x00020000
+#define RAD1_BLK_REG_ADDR		0x00020400
+
+/* RAD0 Registers */
+#define RAD0_CTL_REG			(RAD0_BLK_REG_ADDR + 0x000)
+#define RAD0_PE_PARM_REG		(RAD0_BLK_REG_ADDR + 0x004)
+#define RAD0_BCN_REG			(RAD0_BLK_REG_ADDR + 0x008)
+
+/* Default function ID register */
+#define RAD0_DEFAULT_REG		(RAD0_BLK_REG_ADDR + 0x00C)
+
+/* Default promiscuous ID register */
+#define RAD0_PROMISC_REG		(RAD0_BLK_REG_ADDR + 0x010)
+
+#define RAD0_BCNQ_REG			(RAD0_BLK_REG_ADDR + 0x014)
+
+/*
+ * This register selects 1 of 8 PM Q's using
+ * VLAN pri, for non-BCN packets without a VLAN tag
+ */
+#define RAD0_DEFAULTQ_REG		(RAD0_BLK_REG_ADDR + 0x018)
+
+#define RAD0_ERR_STS			(RAD0_BLK_REG_ADDR + 0x01C)
+#define RAD0_SET_ERR_STS		(RAD0_BLK_REG_ADDR + 0x020)
+#define RAD0_ERR_INT_EN			(RAD0_BLK_REG_ADDR + 0x024)
+#define RAD0_FIRST_ERR			(RAD0_BLK_REG_ADDR + 0x028)
+#define RAD0_FORCE_ERR			(RAD0_BLK_REG_ADDR + 0x02C)
+
+#define RAD0_IF_RCVD			(RAD0_BLK_REG_ADDR + 0x030)
+#define RAD0_IF_RCVD_OCTETS_HIGH	(RAD0_BLK_REG_ADDR + 0x034)
+#define RAD0_IF_RCVD_OCTETS_LOW		(RAD0_BLK_REG_ADDR + 0x038)
+#define RAD0_IF_RCVD_VLAN		(RAD0_BLK_REG_ADDR + 0x03C)
+#define RAD0_IF_RCVD_UCAST		(RAD0_BLK_REG_ADDR + 0x040)
+#define RAD0_IF_RCVD_UCAST_OCTETS_HIGH	(RAD0_BLK_REG_ADDR + 0x044)
+#define RAD0_IF_RCVD_UCAST_OCTETS_LOW   (RAD0_BLK_REG_ADDR + 0x048)
+#define RAD0_IF_RCVD_UCAST_VLAN		(RAD0_BLK_REG_ADDR + 0x04C)
+#define RAD0_IF_RCVD_MCAST		(RAD0_BLK_REG_ADDR + 0x050)
+#define RAD0_IF_RCVD_MCAST_OCTETS_HIGH  (RAD0_BLK_REG_ADDR + 0x054)
+#define RAD0_IF_RCVD_MCAST_OCTETS_LOW   (RAD0_BLK_REG_ADDR + 0x058)
+#define RAD0_IF_RCVD_MCAST_VLAN		(RAD0_BLK_REG_ADDR + 0x05C)
+#define RAD0_IF_RCVD_BCAST		(RAD0_BLK_REG_ADDR + 0x060)
+#define RAD0_IF_RCVD_BCAST_OCTETS_HIGH  (RAD0_BLK_REG_ADDR + 0x064)
+#define RAD0_IF_RCVD_BCAST_OCTETS_LOW   (RAD0_BLK_REG_ADDR + 0x068)
+#define RAD0_IF_RCVD_BCAST_VLAN		(RAD0_BLK_REG_ADDR + 0x06C)
+#define RAD0_DROPPED_FRAMES		(RAD0_BLK_REG_ADDR + 0x070)
+
+#define RAD0_MAC_MAN_1H			(RAD0_BLK_REG_ADDR + 0x080)
+#define RAD0_MAC_MAN_1L			(RAD0_BLK_REG_ADDR + 0x084)
+#define RAD0_MAC_MAN_2H			(RAD0_BLK_REG_ADDR + 0x088)
+#define RAD0_MAC_MAN_2L			(RAD0_BLK_REG_ADDR + 0x08C)
+#define RAD0_MAC_MAN_3H			(RAD0_BLK_REG_ADDR + 0x090)
+#define RAD0_MAC_MAN_3L			(RAD0_BLK_REG_ADDR + 0x094)
+#define RAD0_MAC_MAN_4H			(RAD0_BLK_REG_ADDR + 0x098)
+#define RAD0_MAC_MAN_4L			(RAD0_BLK_REG_ADDR + 0x09C)
+
+#define RAD0_LAST4_IP			(RAD0_BLK_REG_ADDR + 0x100)
+
+/* RAD1 Registers */
+#define RAD1_CTL_REG			(RAD1_BLK_REG_ADDR + 0x000)
+#define RAD1_PE_PARM_REG		(RAD1_BLK_REG_ADDR + 0x004)
+#define RAD1_BCN_REG			(RAD1_BLK_REG_ADDR + 0x008)
+
+/* Default function ID register */
+#define RAD1_DEFAULT_REG		(RAD1_BLK_REG_ADDR + 0x00C)
+
+/* Promiscuous function ID register */
+#define RAD1_PROMISC_REG		(RAD1_BLK_REG_ADDR + 0x010)
+
+#define RAD1_BCNQ_REG			(RAD1_BLK_REG_ADDR + 0x014)
+
+/*
+ * This register selects 1 of 8 PM Q's using
+ * VLAN pri, for non-BCN packets without a VLAN tag
+ */
+#define RAD1_DEFAULTQ_REG		(RAD1_BLK_REG_ADDR + 0x018)
+
+#define RAD1_ERR_STS			(RAD1_BLK_REG_ADDR + 0x01C)
+#define RAD1_SET_ERR_STS		(RAD1_BLK_REG_ADDR + 0x020)
+#define RAD1_ERR_INT_EN			(RAD1_BLK_REG_ADDR + 0x024)
+
+/**
+ * TXA Block Register Address Offset from BAR0
+ * TXA0 Range : 0x21000 - 0x213FF
+ * TXA1 Range : 0x21400 - 0x217FF
+ */
+#define TXA0_BLK_REG_ADDR		0x00021000
+#define TXA1_BLK_REG_ADDR		0x00021400
+
+/* TXA Registers */
+#define TXA0_CTRL_REG			(TXA0_BLK_REG_ADDR + 0x000)
+#define TXA1_CTRL_REG			(TXA1_BLK_REG_ADDR + 0x000)
+
+/**
+ * TSO Sequence # Registers (RO)
+ * Total 8 (for 8 queues)
+ * Holds the last seq.# for TSO frames
+ * See catapult_spec.pdf for more details
+ */
+#define TXA0_TSO_TCP_SEQ_REG(_num)		\
+	(TXA0_BLK_REG_ADDR + 0x020 + ((_num) << 2))
+
+#define TXA1_TSO_TCP_SEQ_REG(_num)		\
+	(TXA1_BLK_REG_ADDR + 0x020 + ((_num) << 2))
+
+/**
+ * TSO IP ID # Registers (RO)
+ * Total 8 (for 8 queues)
+ * Holds the last IP ID for TSO frames
+ * See catapult_spec.pdf for more details
+ */
+#define TXA0_TSO_IP_INFO_REG(_num)		\
+	(TXA0_BLK_REG_ADDR + 0x040 + ((_num) << 2))
+
+#define TXA1_TSO_IP_INFO_REG(_num)		\
+	(TXA1_BLK_REG_ADDR + 0x040 + ((_num) << 2))
+
+/**
+ * RXA Block Register Address Offset from BAR0
+ * RXA0 Range : 0x21800 - 0x21BFF
+ * RXA1 Range : 0x21C00 - 0x21FFF
+ */
+#define RXA0_BLK_REG_ADDR		0x00021800
+#define RXA1_BLK_REG_ADDR		0x00021C00
+
+/* RXA Registers */
+#define RXA0_CTL_REG			(RXA0_BLK_REG_ADDR + 0x040)
+#define RXA1_CTL_REG			(RXA1_BLK_REG_ADDR + 0x040)
+
+/**
+ * PPLB Block Register Address Offset from BAR0
+ * PPLB0 Range : 0x22000 - 0x223FF
+ * PPLB1 Range : 0x22400 - 0x227FF
+ */
+#define PLB0_BLK_REG_ADDR		0x00022000
+#define PLB1_BLK_REG_ADDR		0x00022400
+
+/**
+ * PLB Registers
+ * Holds RL timer used time stamps in RLT tagged frames
+ */
+#define PLB0_ECM_TIMER_REG		(PLB0_BLK_REG_ADDR + 0x05C)
+#define PLB1_ECM_TIMER_REG		(PLB1_BLK_REG_ADDR + 0x05C)
+
+/* Controls the rate-limiter on each of the priority class */
+#define PLB0_RL_CTL			(PLB0_BLK_REG_ADDR + 0x060)
+#define PLB1_RL_CTL			(PLB1_BLK_REG_ADDR + 0x060)
+
+/**
+ * Max byte register, total 8, 0-7
+ * see catapult_spec.pdf for details
+ */
+#define PLB0_RL_MAX_BC(_num)			\
+	(PLB0_BLK_REG_ADDR + 0x064 + ((_num) << 2))
+#define PLB1_RL_MAX_BC(_num)			\
+	(PLB1_BLK_REG_ADDR + 0x064 + ((_num) << 2))
+
+/**
+ * RL Time Unit Register for priority 0-7
+ * 4 bits per priority
+ * (2^rl_unit)*1us is the actual time period
+ */
+#define PLB0_RL_TU_PRIO			(PLB0_BLK_REG_ADDR + 0x084)
+#define PLB1_RL_TU_PRIO			(PLB1_BLK_REG_ADDR + 0x084)
+
+/**
+ * RL byte count register,
+ * bytes transmitted in (rl_unit*1)us time period
+ * 1 per priority, 8 in all, 0-7.
+ */
+#define PLB0_RL_BYTE_CNT(_num)			\
+	(PLB0_BLK_REG_ADDR + 0x088 + ((_num) << 2))
+#define PLB1_RL_BYTE_CNT(_num)			\
+	(PLB1_BLK_REG_ADDR + 0x088 + ((_num) << 2))
+
+/**
+ * RL Min factor register
+ * 2 bits per priority,
+ * 4 factors possible: 1, 0.5, 0.25, 0
+ * 2'b00 - 0; 2'b01 - 0.25; 2'b10 - 0.5; 2'b11 - 1
+ */
+#define PLB0_RL_MIN_REG			(PLB0_BLK_REG_ADDR + 0x0A8)
+#define PLB1_RL_MIN_REG			(PLB1_BLK_REG_ADDR + 0x0A8)
+
+/**
+ * RL Max factor register
+ * 2 bits per priority,
+ * 4 factors possible: 1, 0.5, 0.25, 0
+ * 2'b00 - 0; 2'b01 - 0.25; 2'b10 - 0.5; 2'b11 - 1
+ */
+#define PLB0_RL_MAX_REG			(PLB0_BLK_REG_ADDR + 0x0AC)
+#define PLB1_RL_MAX_REG			(PLB1_BLK_REG_ADDR + 0x0AC)
+
+/* MAC SERDES Address Paging register */
+#define PLB0_EMS_ADD_REG		(PLB0_BLK_REG_ADDR + 0xD0)
+#define PLB1_EMS_ADD_REG		(PLB1_BLK_REG_ADDR + 0xD0)
+
+/* LL EMS Registers */
+#define LL_EMS0_BLK_REG_ADDR		0x00026800
+#define LL_EMS1_BLK_REG_ADDR		0x00026C00
+
+/**
+ * BPC Block Register Address Offset from BAR0
+ * BPC0 Range : 0x23000 - 0x233FF
+ * BPC1 Range : 0x23400 - 0x237FF
+ */
+#define BPC0_BLK_REG_ADDR		0x00023000
+#define BPC1_BLK_REG_ADDR		0x00023400
+
+/**
+ * PMM Block Register Address Offset from BAR0
+ * PMM0 Range : 0x23800 - 0x23BFF
+ * PMM1 Range : 0x23C00 - 0x23FFF
+ */
+#define PMM0_BLK_REG_ADDR		0x00023800
+#define PMM1_BLK_REG_ADDR		0x00023C00
+
+/**
+ * HQM Block Register Address Offset from BAR0
+ * HQM0 Range : 0x24000 - 0x243FF
+ * HQM1 Range : 0x24400 - 0x247FF
+ */
+#define HQM0_BLK_REG_ADDR		0x00024000
+#define HQM1_BLK_REG_ADDR		0x00024400
+
+/**
+ * HQM Control Register
+ * Controls some aspects of IB
+ * See catapult_spec.pdf for details
+ */
+#define HQM0_CTL_REG			(HQM0_BLK_REG_ADDR + 0x000)
+#define HQM1_CTL_REG			(HQM1_BLK_REG_ADDR + 0x000)
+
+/**
+ * HQM Stop Q Semaphore Registers.
+ * Only one Queue resource can be stopped at
+ * any given time. This register controls access
+ * to the single stop Q resource.
+ * See catapult_spec.pdf for details
+ */
+#define HQM0_RXQ_STOP_SEM		(HQM0_BLK_REG_ADDR + 0x028)
+#define HQM0_TXQ_STOP_SEM		(HQM0_BLK_REG_ADDR + 0x02C)
+#define HQM1_RXQ_STOP_SEM		(HQM1_BLK_REG_ADDR + 0x028)
+#define HQM1_TXQ_STOP_SEM		(HQM1_BLK_REG_ADDR + 0x02C)
+
+/**
+ * LUT Block Register Address Offset from BAR0
+ * LUT0 Range : 0x25800 - 0x25BFF
+ * LUT1 Range : 0x25C00 - 0x25FFF
+ */
+#define LUT0_BLK_REG_ADDR		0x00025800
+#define LUT1_BLK_REG_ADDR		0x00025C00
+
+/**
+ * LUT Registers
+ * See catapult_spec.pdf for details
+ */
+#define LUT0_ERR_STS			(LUT0_BLK_REG_ADDR + 0x000)
+#define LUT1_ERR_STS			(LUT1_BLK_REG_ADDR + 0x000)
+#define LUT0_SET_ERR_STS		(LUT0_BLK_REG_ADDR + 0x004)
+#define LUT1_SET_ERR_STS		(LUT1_BLK_REG_ADDR + 0x004)
+
+/**
+ * TRC (Debug/Trace) Register Offset from BAR0
+ * Range : 0x26000 -- 0x263FFF
+ */
+#define TRC_BLK_REG_ADDR		0x00026000
+
+/**
+ * TRC Registers
+ * See catapult_spec.pdf for details of each
+ */
+#define TRC_CTL_REG			(TRC_BLK_REG_ADDR + 0x000)
+#define TRC_MODS_REG			(TRC_BLK_REG_ADDR + 0x004)
+#define TRC_TRGC_REG			(TRC_BLK_REG_ADDR + 0x008)
+#define TRC_CNT1_REG			(TRC_BLK_REG_ADDR + 0x010)
+#define TRC_CNT2_REG			(TRC_BLK_REG_ADDR + 0x014)
+#define TRC_NXTS_REG			(TRC_BLK_REG_ADDR + 0x018)
+#define TRC_DIRR_REG			(TRC_BLK_REG_ADDR + 0x01C)
+
+/**
+ * TRC Trigger match filters, total 10
+ * Determines the trigger condition
+ */
+#define TRC_TRGM_REG(_num)		\
+	(TRC_BLK_REG_ADDR + 0x040 + ((_num) << 2))
+
+/**
+ * TRC Next State filters, total 10
+ * Determines the next state conditions
+ */
+#define TRC_NXTM_REG(_num)		\
+	(TRC_BLK_REG_ADDR + 0x080 + ((_num) << 2))
+
+/**
+ * TRC Store Match filters, total 10
+ * Determines the store conditions
+ */
+#define TRC_STRM_REG(_num)		\
+	(TRC_BLK_REG_ADDR + 0x0C0 + ((_num) << 2))
+
+/* DOORBELLS ACCESS */
+
+/**
+ * Catapult doorbells
+ * Each doorbell-queue set has
+ * 1 RxQ, 1 TxQ, 2 IBs in that order
+ * Size of each entry in 32 bytes, even though only 1 word
+ * is used. For Non-VM case each doorbell-q set is
+ * separated by 128 bytes, for VM case it is separated
+ * by 4K bytes
+ * Non VM case Range : 0x38000 - 0x39FFF
+ * VM case Range     : 0x100000 - 0x11FFFF
+ * The range applies to both HQMs
+ */
+#define HQM_DOORBELL_BLK_BASE_ADDR	0x00038000
+#define HQM_DOORBELL_VM_BLK_BASE_ADDR	0x00100000
+
+/* MEMORY ACCESS */
+
+/**
+ * Catapult H/W Block Memory Access Address
+ * To the host a memory space of 32K (page) is visible
+ * at a time. The address range is from 0x08000 to 0x0FFFF
+ */
+#define HW_BLK_HOST_MEM_ADDR		0x08000
+
+/**
+ * Catapult LUT Memory Access Page Numbers
+ * Range : LUT0 0xa0-0xa1
+ *         LUT1 0xa2-0xa3
+ */
+#define LUT0_MEM_BLK_BASE_PG_NUM	0x000000A0
+#define LUT1_MEM_BLK_BASE_PG_NUM	0x000000A2
+
+/**
+ * Catapult RxFn Database Memory Block Base Offset
+ *
+ * The Rx function database exists in LUT block.
+ * In PCIe space this is accessible as a 256x32
+ * bit block. Each entry in this database is 4
+ * (4 byte) words. Max. entries is 64.
+ * Address of an entry corresponding to a function
+ * = base_addr + (function_no. * 16)
+ */
+#define RX_FNDB_RAM_BASE_OFFSET		0x0000B400
+
+/**
+ * Catapult TxFn Database Memory Block Base Offset Address
+ *
+ * The Tx function database exists in LUT block.
+ * In PCIe space this is accessible as a 64x32
+ * bit block. Each entry in this database is 1
+ * (4 byte) word. Max. entries is 64.
+ * Address of an entry corresponding to a function
+ * = base_addr + (function_no. * 4)
+ */
+#define TX_FNDB_RAM_BASE_OFFSET		0x0000B800
+
+/**
+ * Catapult Unicast CAM Base Offset Address
+ *
+ * Exists in LUT memory space.
+ * Shared by both the LL & FCoE driver.
+ * Size is 256x48 bits; mapped to PCIe space
+ * 512x32 bit blocks. For each address, bits
+ * are written in the order : [47:32] and then
+ * [31:0].
+ */
+#define UCAST_CAM_BASE_OFFSET		0x0000A800
+
+/**
+ * Catapult Unicast RAM Base Offset Address
+ *
+ * Exists in LUT memory space.
+ * Shared by both the LL & FCoE driver.
+ * Size is 256x9 bits.
+ */
+#define UCAST_RAM_BASE_OFFSET		0x0000B000
+
+/**
+ * Catapult Mulicast CAM Base Offset Address
+ *
+ * Exists in LUT memory space.
+ * Shared by both the LL & FCoE driver.
+ * Size is 256x48 bits; mapped to PCIe space
+ * 512x32 bit blocks. For each address, bits
+ * are written in the order : [47:32] and then
+ * [31:0].
+ */
+#define MCAST_CAM_BASE_OFFSET		0x0000A000
+
+/**
+ * Catapult VLAN RAM Base Offset Address
+ *
+ * Exists in LUT memory space.
+ * Size is 4096x66 bits; mapped to PCIe space as
+ * 8192x32 bit blocks.
+ * All the 4K entries are within the address range
+ * 0x0000 to 0x8000, so in the first LUT page.
+ */
+#define VLAN_RAM_BASE_OFFSET		0x00000000
+
+/**
+ * Catapult Tx Stats RAM Base Offset Address
+ *
+ * Exists in LUT memory space.
+ * Size is 1024x33 bits;
+ * Each Tx function has 64 bytes of space
+ */
+#define TX_STATS_RAM_BASE_OFFSET	0x00009000
+
+/**
+ * Catapult Rx Stats RAM Base Offset Address
+ *
+ * Exists in LUT memory space.
+ * Size is 1024x33 bits;
+ * Each Rx function has 64 bytes of space
+ */
+#define RX_STATS_RAM_BASE_OFFSET	0x00008000
+
+/* Catapult RXA Memory Access Page Numbers */
+#define RXA0_MEM_BLK_BASE_PG_NUM	0x0000008C
+#define RXA1_MEM_BLK_BASE_PG_NUM	0x0000008D
+
+/**
+ * Catapult Multicast Vector Table Base Offset Address
+ *
+ * Exists in RxA memory space.
+ * Organized as 512x65 bit block.
+ * However for each entry 16 bytes allocated (power of 2)
+ * Total size 512*16 bytes.
+ * There are two logical divisions, 256 entries each :
+ * a) Entries 0x00 to 0xff (256) -- Approx. MVT
+ *    Offset 0x000 to 0xFFF
+ * b) Entries 0x100 to 0x1ff (256) -- Exact MVT
+ *    Offsets 0x1000 to 0x1FFF
+ */
+#define MCAST_APPROX_MVT_BASE_OFFSET	0x00000000
+#define MCAST_EXACT_MVT_BASE_OFFSET	0x00001000
+
+/**
+ * Catapult RxQ Translate Table (RIT) Base Offset Address
+ *
+ * Exists in RxA memory space
+ * Total no. of entries 64
+ * Each entry is 1 (4 byte) word.
+ * 31:12 -- Reserved
+ * 11:0  -- Two 6 bit RxQ Ids
+ */
+#define FUNCTION_TO_RXQ_TRANSLATE	0x00002000
+
+/* Catapult RxAdm (RAD) Memory Access Page Numbers */
+#define RAD0_MEM_BLK_BASE_PG_NUM	0x00000086
+#define RAD1_MEM_BLK_BASE_PG_NUM	0x00000087
+
+/**
+ * Catapult RSS Table Base Offset Address
+ *
+ * Exists in RAD memory space.
+ * Each entry is 352 bits, but alligned on
+ * 64 byte (512 bit) boundary. Accessed
+ * 4 byte words, the whole entry can be
+ * broken into 11 word accesses.
+ */
+#define RSS_TABLE_BASE_OFFSET		0x00000800
+
+/**
+ * Catapult CPQ Block Page Number
+ * This value is written to the page number registers
+ * to access the memory associated with the mailboxes.
+ */
+#define CPQ_BLK_PG_NUM			0x00000005
+
+/**
+ * Clarification :
+ * LL functions are 2 & 3; can HostFn0/HostFn1
+ * <-> LPU0/LPU1 memories be used ?
+ */
+/**
+ * Catapult HostFn0/HostFn1 to LPU0/LPU1 Mbox memory
+ * Per catapult_spec.pdf, the offset of the mbox
+ * memory is in the register space at an offset of 0x200
+ */
+#define CPQ_BLK_REG_MBOX_ADDR		(CPQ_BLK_REG_ADDR + 0x200)
+
+#define HOSTFN_LPU_MBOX			(CPQ_BLK_REG_MBOX_ADDR + 0x000)
+
+/* Catapult LPU0/LPU1 to HostFn0/HostFn1 Mbox memory */
+#define LPU_HOSTFN_MBOX			(CPQ_BLK_REG_MBOX_ADDR + 0x080)
+
+/**
+ * Catapult HQM Block Page Number
+ * This is written to the page number register for
+ * the appropriate function to access the memory
+ * associated with HQM
+ */
+#define HQM0_BLK_PG_NUM			0x00000096
+#define HQM1_BLK_PG_NUM			0x00000097
+
+/**
+ * Note that TxQ and RxQ entries are interlaced
+ * the HQM memory, i.e RXQ0, TXQ0, RXQ1, TXQ1.. etc.
+ */
+
+#define HQM_RXTX_Q_RAM_BASE_OFFSET	0x00004000
+
+/**
+ * CQ Memory
+ * Exists in HQM Memory space
+ * Each entry is 16 (4 byte) words of which
+ * only 12 words are used for configuration
+ * Total 64 entries per HQM memory space
+ */
+#define HQM_CQ_RAM_BASE_OFFSET		0x00006000
+
+/**
+ * Interrupt Block (IB) Memory
+ * Exists in HQM Memory space
+ * Each entry is 8 (4 byte) words of which
+ * only 5 words are used for configuration
+ * Total 128 entries per HQM memory space
+ */
+#define HQM_IB_RAM_BASE_OFFSET		0x00001000
+
+/**
+ * Index Table (IT) Memory
+ * Exists in HQM Memory space
+ * Each entry is 1 (4 byte) word which
+ * is used for configuration
+ * Total 128 entries per HQM memory space
+ */
+#define HQM_INDX_TBL_RAM_BASE_OFFSET	0x00002000
+
+/**
+ * PSS Block Memory Page Number
+ * This is written to the appropriate page number
+ * register to access the CPU memory.
+ * Also known as the PSS secondary memory (SMEM).
+ * Range : 0x180 to 0x1CF
+ * See catapult_spec.pdf for details
+ */
+#define PSS_BLK_PG_NUM			0x00000180
+
+/**
+ * Offsets of different instances of PSS SMEM
+ * 2.5M of continuous 1T memory space : 2 blocks
+ * of 1M each (32 pages each, page=32KB) and 4 smaller
+ * blocks of 128K each (4 pages each, page=32KB)
+ * PSS_LMEM_INST0 is used for firmware download
+ */
+#define PSS_LMEM_INST0			0x00000000
+#define PSS_LMEM_INST1			0x00100000
+#define PSS_LMEM_INST2			0x00200000
+#define PSS_LMEM_INST3			0x00220000
+#define PSS_LMEM_INST4			0x00240000
+#define PSS_LMEM_INST5			0x00260000
+
+#define BNA_PCI_REG_CT_ADDRSZ		(0x40000)
+
+#define BNA_GET_PAGE_NUM(_base_page, _offset)   \
+	((_base_page) + ((_offset) >> 15))
+
+#define BNA_GET_PAGE_OFFSET(_offset)    \
+	((_offset) & 0x7fff)
+
+#define BNA_GET_MEM_BASE_ADDR(_bar0, _base_offset)	\
+	((_bar0) + HW_BLK_HOST_MEM_ADDR		\
+	  + BNA_GET_PAGE_OFFSET((_base_offset)))
+
+#define BNA_GET_VLAN_MEM_ENTRY_ADDR(_bar0, _fn_id, _vlan_id)\
+	(_bar0 + (HW_BLK_HOST_MEM_ADDR)  \
+	+ (BNA_GET_PAGE_OFFSET(VLAN_RAM_BASE_OFFSET))	\
+	+ (((_fn_id) & 0x3f) << 9)	  \
+	+ (((_vlan_id) & 0xfe0) >> 3))
+
+/**
+ *
+ *  Interrupt related bits, flags and macros
+ *
+ */
+
+#define __LPU02HOST_MBOX0_STATUS_BITS 0x00100000
+#define __LPU12HOST_MBOX0_STATUS_BITS 0x00200000
+#define __LPU02HOST_MBOX1_STATUS_BITS 0x00400000
+#define __LPU12HOST_MBOX1_STATUS_BITS 0x00800000
+
+#define __LPU02HOST_MBOX0_MASK_BITS	0x00100000
+#define __LPU12HOST_MBOX0_MASK_BITS	0x00200000
+#define __LPU02HOST_MBOX1_MASK_BITS	0x00400000
+#define __LPU12HOST_MBOX1_MASK_BITS	0x00800000
+
+#define __LPU2HOST_MBOX_MASK_BITS			 \
+	(__LPU02HOST_MBOX0_MASK_BITS | __LPU02HOST_MBOX1_MASK_BITS |	\
+	  __LPU12HOST_MBOX0_MASK_BITS | __LPU12HOST_MBOX1_MASK_BITS)
+
+#define __LPU2HOST_IB_STATUS_BITS	0x0000ffff
+
+#define BNA_IS_LPU0_MBOX_INTR(_intr_status) \
+	((_intr_status) & (__LPU02HOST_MBOX0_STATUS_BITS | \
+			__LPU02HOST_MBOX1_STATUS_BITS))
+
+#define BNA_IS_LPU1_MBOX_INTR(_intr_status) \
+	((_intr_status) & (__LPU12HOST_MBOX0_STATUS_BITS | \
+		__LPU12HOST_MBOX1_STATUS_BITS))
+
+#define BNA_IS_MBOX_INTR(_intr_status)		\
+	((_intr_status) &  			\
+	(__LPU02HOST_MBOX0_STATUS_BITS |	\
+	 __LPU02HOST_MBOX1_STATUS_BITS |	\
+	 __LPU12HOST_MBOX0_STATUS_BITS |	\
+	 __LPU12HOST_MBOX1_STATUS_BITS))
+
+#define __EMC_ERROR_STATUS_BITS		0x00010000
+#define __LPU0_ERROR_STATUS_BITS	0x00020000
+#define __LPU1_ERROR_STATUS_BITS	0x00040000
+#define __PSS_ERROR_STATUS_BITS		0x00080000
+
+#define __HALT_STATUS_BITS		0x01000000
+
+#define __EMC_ERROR_MASK_BITS		0x00010000
+#define __LPU0_ERROR_MASK_BITS		0x00020000
+#define __LPU1_ERROR_MASK_BITS		0x00040000
+#define __PSS_ERROR_MASK_BITS		0x00080000
+
+#define __HALT_MASK_BITS		0x01000000
+
+#define __ERROR_MASK_BITS		\
+	(__EMC_ERROR_MASK_BITS | __LPU0_ERROR_MASK_BITS | \
+	  __LPU1_ERROR_MASK_BITS | __PSS_ERROR_MASK_BITS | \
+	  __HALT_MASK_BITS)
+
+#define BNA_IS_ERR_INTR(_intr_status)	\
+	((_intr_status) &  		\
+	(__EMC_ERROR_STATUS_BITS |  	\
+	 __LPU0_ERROR_STATUS_BITS | 	\
+	 __LPU1_ERROR_STATUS_BITS | 	\
+	 __PSS_ERROR_STATUS_BITS  | 	\
+	 __HALT_STATUS_BITS))
+
+#define BNA_IS_MBOX_ERR_INTR(_intr_status)	\
+	(BNA_IS_MBOX_INTR((_intr_status)) |	\
+	 BNA_IS_ERR_INTR((_intr_status)))
+
+#define BNA_IS_INTX_DATA_INTR(_intr_status)	\
+	((_intr_status) & __LPU2HOST_IB_STATUS_BITS)
+
+#define BNA_INTR_STATUS_MBOX_CLR(_intr_status)			\
+do {								\
+	(_intr_status) &= ~(__LPU02HOST_MBOX0_STATUS_BITS |	\
+			__LPU02HOST_MBOX1_STATUS_BITS | 	\
+			__LPU12HOST_MBOX0_STATUS_BITS | 	\
+			__LPU12HOST_MBOX1_STATUS_BITS); 	\
+} while (0)
+
+#define BNA_INTR_STATUS_ERR_CLR(_intr_status)		\
+do {							\
+	(_intr_status) &= ~(__EMC_ERROR_STATUS_BITS |	\
+		__LPU0_ERROR_STATUS_BITS |		\
+		__LPU1_ERROR_STATUS_BITS |		\
+		__PSS_ERROR_STATUS_BITS  |		\
+		__HALT_STATUS_BITS);			\
+} while (0)
+
+#define bna_intx_disable(_bna, _cur_mask)		\
+{							\
+	(_cur_mask) = readl((_bna)->regs.fn_int_mask);\
+	writel(0xffffffff, (_bna)->regs.fn_int_mask);\
+}
+
+#define bna_intx_enable(bna, new_mask) 			\
+	writel((new_mask), (bna)->regs.fn_int_mask)
+
+#define bna_mbox_intr_disable(bna)		\
+	writel((readl((bna)->regs.fn_int_mask) | \
+	     (__LPU2HOST_MBOX_MASK_BITS | __ERROR_MASK_BITS)), \
+	     (bna)->regs.fn_int_mask)
+
+#define bna_mbox_intr_enable(bna)		\
+	writel((readl((bna)->regs.fn_int_mask) & \
+	     ~(__LPU2HOST_MBOX_MASK_BITS | __ERROR_MASK_BITS)), \
+	     (bna)->regs.fn_int_mask)
+
+#define bna_intr_status_get(_bna, _status)				\
+{									\
+	(_status) = readl((_bna)->regs.fn_int_status);		\
+	if ((_status)) {						\
+		writel((_status) & ~(__LPU02HOST_MBOX0_STATUS_BITS |\
+					  __LPU02HOST_MBOX1_STATUS_BITS |\
+					  __LPU12HOST_MBOX0_STATUS_BITS |\
+					  __LPU12HOST_MBOX1_STATUS_BITS), \
+			      (_bna)->regs.fn_int_status);\
+	}								\
+}
+
+#define bna_intr_status_get_no_clr(_bna, _status)		\
+	(_status) = readl((_bna)->regs.fn_int_status)
+
+#define bna_intr_mask_get(bna, mask)		\
+	(*mask) = readl((bna)->regs.fn_int_mask)
+
+#define bna_intr_ack(bna, intr_bmap)		\
+	writel((intr_bmap), (bna)->regs.fn_int_status)
+
+#define bna_ib_intx_disable(bna, ib_id)		\
+	writel(readl((bna)->regs.fn_int_mask) | \
+	    (1 << (ib_id)), \
+	    (bna)->regs.fn_int_mask)
+
+#define bna_ib_intx_enable(bna, ib_id)		\
+	writel(readl((bna)->regs.fn_int_mask) & \
+	    ~(1 << (ib_id)), \
+	    (bna)->regs.fn_int_mask)
+
+#define bna_mbox_msix_idx_set(_device) \
+do {\
+	writel(((_device)->vector & 0x000001FF), \
+		(_device)->bna->pcidev.pci_bar_kva + \
+		reg_offset[(_device)->bna->pcidev.pci_func].msix_idx);\
+} while (0)
+
+/**
+ *
+ * TxQ, RxQ, CQ related bits, offsets, macros
+ *
+ */
+
+#define	BNA_Q_IDLE_STATE	0x00008001
+
+#define BNA_GET_DOORBELL_BASE_ADDR(_bar0)	\
+	((_bar0) + HQM_DOORBELL_BLK_BASE_ADDR)
+
+#define BNA_GET_DOORBELL_ENTRY_OFFSET(_entry)		\
+	((HQM_DOORBELL_BLK_BASE_ADDR)		\
+	+ (_entry << 7))
+
+#define BNA_DOORBELL_IB_INT_ACK(_timeout, _events) \
+		(0x80000000 | ((_timeout) << 16) | (_events))
+
+#define BNA_DOORBELL_IB_INT_DISABLE		(0x40000000)
+
+/* TxQ Entry Opcodes */
+#define BNA_TXQ_WI_SEND 		(0x402)	/* Single Frame Transmission */
+#define BNA_TXQ_WI_SEND_LSO 		(0x403)	/* Multi-Frame Transmission */
+#define BNA_TXQ_WI_EXTENSION		(0x104)	/* Extension WI */
+
+/* TxQ Entry Control Flags */
+#define BNA_TXQ_WI_CF_FCOE_CRC  	(1 << 8)
+#define BNA_TXQ_WI_CF_IPID_MODE 	(1 << 5)
+#define BNA_TXQ_WI_CF_INS_PRIO  	(1 << 4)
+#define BNA_TXQ_WI_CF_INS_VLAN  	(1 << 3)
+#define BNA_TXQ_WI_CF_UDP_CKSUM 	(1 << 2)
+#define BNA_TXQ_WI_CF_TCP_CKSUM 	(1 << 1)
+#define BNA_TXQ_WI_CF_IP_CKSUM  	(1 << 0)
+
+#define BNA_TXQ_WI_L4_HDR_N_OFFSET(_hdr_size, _offset) \
+		(((_hdr_size) << 10) | ((_offset) & 0x3FF))
+
+/*
+ * Completion Q defines
+ */
+/* CQ Entry Flags */
+#define	BNA_CQ_EF_MAC_ERROR 	(1 <<  0)
+#define	BNA_CQ_EF_FCS_ERROR 	(1 <<  1)
+#define	BNA_CQ_EF_TOO_LONG  	(1 <<  2)
+#define	BNA_CQ_EF_FC_CRC_OK 	(1 <<  3)
+
+#define	BNA_CQ_EF_RSVD1 	(1 <<  4)
+#define	BNA_CQ_EF_L4_CKSUM_OK	(1 <<  5)
+#define	BNA_CQ_EF_L3_CKSUM_OK	(1 <<  6)
+#define	BNA_CQ_EF_HDS_HEADER	(1 <<  7)
+
+#define	BNA_CQ_EF_UDP   	(1 <<  8)
+#define	BNA_CQ_EF_TCP   	(1 <<  9)
+#define	BNA_CQ_EF_IP_OPTIONS	(1 << 10)
+#define	BNA_CQ_EF_IPV6  	(1 << 11)
+
+#define	BNA_CQ_EF_IPV4  	(1 << 12)
+#define	BNA_CQ_EF_VLAN  	(1 << 13)
+#define	BNA_CQ_EF_RSS   	(1 << 14)
+#define	BNA_CQ_EF_RSVD2 	(1 << 15)
+
+#define	BNA_CQ_EF_MCAST_MATCH   (1 << 16)
+#define	BNA_CQ_EF_MCAST 	(1 << 17)
+#define BNA_CQ_EF_BCAST 	(1 << 18)
+#define	BNA_CQ_EF_REMOTE 	(1 << 19)
+
+#define	BNA_CQ_EF_LOCAL		(1 << 20)
+
+/**
+ *
+ * Data structures
+ *
+ */
+
+enum txf_flags {
+	BFI_TXF_CF_ENABLE		= 1 << 0,
+	BFI_TXF_CF_VLAN_FILTER		= 1 << 8,
+	BFI_TXF_CF_VLAN_ADMIT		= 1 << 9,
+	BFI_TXF_CF_VLAN_INSERT		= 1 << 10,
+	BFI_TXF_CF_RSVD1		= 1 << 11,
+	BFI_TXF_CF_MAC_SA_CHECK		= 1 << 12,
+	BFI_TXF_CF_VLAN_WI_BASED	= 1 << 13,
+	BFI_TXF_CF_VSWITCH_MCAST	= 1 << 14,
+	BFI_TXF_CF_VSWITCH_UCAST	= 1 << 15,
+	BFI_TXF_CF_RSVD2		= 0x7F << 1
+};
+
+enum ib_flags {
+	BFI_IB_CF_MASTER_ENABLE		= (1 << 0),
+	BFI_IB_CF_MSIX_MODE		= (1 << 1),
+	BFI_IB_CF_COALESCING_MODE	= (1 << 2),
+	BFI_IB_CF_INTER_PKT_ENABLE	= (1 << 3),
+	BFI_IB_CF_INT_ENABLE		= (1 << 4),
+	BFI_IB_CF_INTER_PKT_DMA		= (1 << 5),
+	BFI_IB_CF_ACK_PENDING		= (1 << 6),
+	BFI_IB_CF_RESERVED1		= (1 << 7)
+};
+
+enum rss_hash_type {
+	BFI_RSS_T_V4_TCP    		= (1 << 11),
+	BFI_RSS_T_V4_IP     		= (1 << 10),
+	BFI_RSS_T_V6_TCP    		= (1 <<  9),
+	BFI_RSS_T_V6_IP     		= (1 <<  8)
+};
+enum hds_header_type {
+	BNA_HDS_T_V4_TCP	= (1 << 11),
+	BNA_HDS_T_V4_UDP	= (1 << 10),
+	BNA_HDS_T_V6_TCP	= (1 << 9),
+	BNA_HDS_T_V6_UDP	= (1 << 8),
+	BNA_HDS_FORCED		= (1 << 7),
+};
+enum rxf_flags {
+	BNA_RXF_CF_SM_LG_RXQ			= (1 << 15),
+	BNA_RXF_CF_DEFAULT_VLAN			= (1 << 14),
+	BNA_RXF_CF_DEFAULT_FUNCTION_ENABLE	= (1 << 13),
+	BNA_RXF_CF_VLAN_STRIP			= (1 << 12),
+	BNA_RXF_CF_RSS_ENABLE			= (1 <<  8)
+};
+struct bna_chip_regs_offset {
+	u32 page_addr;
+	u32 fn_int_status;
+	u32 fn_int_mask;
+	u32 msix_idx;
+};
+extern const struct bna_chip_regs_offset reg_offset[];
+
+struct bna_chip_regs {
+	void __iomem *page_addr;
+	void __iomem *fn_int_status;
+	void __iomem *fn_int_mask;
+};
+
+struct bna_txq_mem {
+	u32 pg_tbl_addr_lo;
+	u32 pg_tbl_addr_hi;
+	u32 cur_q_entry_lo;
+	u32 cur_q_entry_hi;
+	u32 reserved1;
+	u32 reserved2;
+	u32 pg_cnt_n_prd_ptr;	/* 31:16->total page count */
+					/* 15:0 ->producer pointer (index?) */
+	u32 entry_n_pg_size; 	/* 31:16->entry size */
+					/* 15:0 ->page size */
+	u32 int_blk_n_cns_ptr;	/* 31:24->Int Blk Id;  */
+					/* 23:16->Int Blk Offset */
+					/* 15:0 ->consumer pointer(index?) */
+	u32 cns_ptr2_n_q_state;	/* 31:16->cons. ptr 2; 15:0-> Q state */
+	u32 nxt_qid_n_fid_n_pri;	/* 17:10->next */
+					/* QId;9:3->FID;2:0->Priority */
+	u32 wvc_n_cquota_n_rquota; /* 31:24->WI Vector Count; */
+					/* 23:12->Cfg Quota; */
+					/* 11:0 ->Run Quota */
+	u32 reserved3[4];
+};
+
+struct bna_rxq_mem {
+	u32 pg_tbl_addr_lo;
+	u32 pg_tbl_addr_hi;
+	u32 cur_q_entry_lo;
+	u32 cur_q_entry_hi;
+	u32 reserved1;
+	u32 reserved2;
+	u32 pg_cnt_n_prd_ptr;	/* 31:16->total page count */
+					/* 15:0 ->producer pointer (index?) */
+	u32 entry_n_pg_size;	/* 31:16->entry size */
+					/* 15:0 ->page size */
+	u32 sg_n_cq_n_cns_ptr;	/* 31:28->reserved; 27:24->sg count */
+					/* 23:16->CQ; */
+					/* 15:0->consumer pointer(index?) */
+	u32 buf_sz_n_q_state; 	/* 31:16->buffer size; 15:0-> Q state */
+	u32 next_qid;		/* 17:10->next QId */
+	u32 reserved3;
+	u32 reserved4[4];
+};
+
+struct bna_rxtx_q_mem {
+	struct bna_rxq_mem rxq;
+	struct bna_txq_mem txq;
+};
+
+struct bna_cq_mem {
+	u32 pg_tbl_addr_lo;
+	u32 pg_tbl_addr_hi;
+	u32 cur_q_entry_lo;
+	u32 cur_q_entry_hi;
+
+	u32 reserved1;
+	u32 reserved2;
+	u32 pg_cnt_n_prd_ptr;	/* 31:16->total page count */
+					/* 15:0 ->producer pointer (index?) */
+	u32 entry_n_pg_size;	/* 31:16->entry size */
+					/* 15:0 ->page size */
+	u32 int_blk_n_cns_ptr;	/* 31:24->Int Blk Id; */
+					/* 23:16->Int Blk Offset */
+					/* 15:0 ->consumer pointer(index?) */
+	u32 q_state;		/* 31:16->reserved; 15:0-> Q state */
+	u32 reserved3[2];
+	u32 reserved4[4];
+};
+
+struct bna_ib_blk_mem {
+	u32 host_addr_lo;
+	u32 host_addr_hi;
+	u32 clsc_n_ctrl_n_msix;	/* 31:24->coalescing; */
+					/* 23:16->coalescing cfg; */
+					/* 15:8 ->control; */
+					/* 7:0 ->msix; */
+	u32 ipkt_n_ent_n_idxof;
+	u32 ipkt_cnt_cfg_n_unacked;
+
+	u32 reserved[3];
+};
+
+struct bna_idx_tbl_mem {
+	u32 idx;	  /* !< 31:16->res;15:0->idx; */
+};
+
+struct bna_doorbell_qset {
+	u32 rxq[0x20 >> 2];
+	u32 txq[0x20 >> 2];
+	u32 ib0[0x20 >> 2];
+	u32 ib1[0x20 >> 2];
+};
+
+struct bna_rx_fndb_ram {
+	u32 rss_prop;
+	u32 size_routing_props;
+	u32 rit_hds_mcastq;
+	u32 control_flags;
+};
+
+struct bna_tx_fndb_ram {
+	u32 vlan_n_ctrl_flags;
+};
+
+/**
+ * @brief
+ *  Structure which maps to RxFn Indirection Table (RIT)
+ *  Size : 1 word
+ *  See catapult_spec.pdf, RxA for details
+ */
+struct bna_rit_mem {
+	u32 rxq_ids;	/* !< 31:12->res;11:0->two 6 bit RxQ Ids */
+};
+
+/**
+ * @brief
+ *  Structure which maps to RSS Table entry
+ *  Size : 16 words
+ *  See catapult_spec.pdf, RAD for details
+ */
+struct bna_rss_mem {
+	/*
+	 * 31:12-> res
+	 * 11:8 -> protocol type
+	 *  7:0 -> hash index
+	 */
+	u32 type_n_hash;
+	u32 hash_key[10];  /* !< 40 byte Toeplitz hash key */
+	u32 reserved[5];
+};
+
+/* TxQ Vector (a.k.a. Tx-Buffer Descriptor) */
+struct bna_dma_addr {
+	u32		msb;
+	u32		lsb;
+};
+
+struct bna_txq_wi_vector {
+	u16 		reserved;
+	u16 		length;		/* Only 14 LSB are valid */
+	struct bna_dma_addr host_addr; /* Tx-Buf DMA addr */
+};
+
+typedef u16 bna_txq_wi_opcode_t;
+
+typedef u16 bna_txq_wi_ctrl_flag_t;
+
+/**
+ *  TxQ Entry Structure
+ *
+ *  BEWARE:  Load values into this structure with correct endianess.
+ */
+struct bna_txq_entry {
+	union {
+		struct {
+			u8 reserved;
+			u8 num_vectors;	/* number of vectors present */
+			bna_txq_wi_opcode_t opcode; /* Either */
+						    /* BNA_TXQ_WI_SEND or */
+						    /* BNA_TXQ_WI_SEND_LSO */
+			bna_txq_wi_ctrl_flag_t flags; /* OR of all the flags */
+			u16 l4_hdr_size_n_offset;
+			u16 vlan_tag;
+			u16 lso_mss;	/* Only 14 LSB are valid */
+			u32 frame_length;	/* Only 24 LSB are valid */
+		} wi;
+
+		struct {
+			u16 reserved;
+			bna_txq_wi_opcode_t opcode; /* Must be */
+						    /* BNA_TXQ_WI_EXTENSION */
+			u32 reserved2[3];	/* Place holder for */
+						/* removed vector (12 bytes) */
+		} wi_ext;
+	} hdr;
+	struct bna_txq_wi_vector vector[4];
+};
+#define wi_hdr  	hdr.wi
+#define wi_ext_hdr  hdr.wi_ext
+
+/* RxQ Entry Structure */
+struct bna_rxq_entry {		/* Rx-Buffer */
+	struct bna_dma_addr host_addr; /* Rx-Buffer DMA address */
+};
+
+typedef u32 bna_cq_e_flag_t;
+
+/* CQ Entry Structure */
+struct bna_cq_entry {
+	bna_cq_e_flag_t flags;
+	u16 vlan_tag;
+	u16 length;
+	u32 rss_hash;
+	u8 valid;
+	u8 reserved1;
+	u8 reserved2;
+	u8 rxq_id;
+};
+
+#endif /* __BNA_HW_H__ */