diff options
| author | Dmitry Kravkov <dmitry@broadcom.com> | 2010-07-27 12:31:10 +0000 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2010-07-27 20:35:39 -0700 |
| commit | 5d1e859c5b600c491336f023a2f2105c24597226 (patch) | |
| tree | 9391b004d9237f385c36297214a022cadcb8f84a /drivers/net/bnx2x_link.c | |
| parent | 2c6952dfdda2f266f2f501792b8d6413caf25f7a (diff) | |
bnx2x: Create separate folder for bnx2x driver
This commit includes files movement to newly created folder
using git-mv command and fixes references in cnic and bnx2x code
to each other.
files moved using following:
#!/bin/bash
mkdir drivers/net/bnx2x/
list=$(cd drivers/net/ && ls bnx2x*.[ch])
for f in $list; do
git mv -f drivers/net/$f drivers/net/bnx2x/$f
done
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/bnx2x_link.c')
| -rw-r--r-- | drivers/net/bnx2x_link.c | 6735 |
1 files changed, 0 insertions, 6735 deletions
diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c deleted file mode 100644 index 0383e306631..00000000000 --- a/drivers/net/bnx2x_link.c +++ /dev/null @@ -1,6735 +0,0 @@ -/* Copyright 2008-2009 Broadcom Corporation - * - * Unless you and Broadcom execute a separate written software license - * agreement governing use of this software, this software is licensed to you - * under the terms of the GNU General Public License version 2, available - * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL"). - * - * Notwithstanding the above, under no circumstances may you combine this - * software in any way with any other Broadcom software provided under a - * license other than the GPL, without Broadcom's express prior written - * consent. - * - * Written by Yaniv Rosner - * - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/pci.h> -#include <linux/netdevice.h> -#include <linux/delay.h> -#include <linux/ethtool.h> -#include <linux/mutex.h> - -#include "bnx2x.h" - -/********************************************************/ -#define ETH_HLEN 14 -#define ETH_OVREHEAD (ETH_HLEN + 8)/* 8 for CRC + VLAN*/ -#define ETH_MIN_PACKET_SIZE 60 -#define ETH_MAX_PACKET_SIZE 1500 -#define ETH_MAX_JUMBO_PACKET_SIZE 9600 -#define MDIO_ACCESS_TIMEOUT 1000 -#define BMAC_CONTROL_RX_ENABLE 2 - -/***********************************************************/ -/* Shortcut definitions */ -/***********************************************************/ - -#define NIG_LATCH_BC_ENABLE_MI_INT 0 - -#define NIG_STATUS_EMAC0_MI_INT \ - NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_EMAC0_MISC_MI_INT -#define NIG_STATUS_XGXS0_LINK10G \ - NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G -#define NIG_STATUS_XGXS0_LINK_STATUS \ - NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS -#define NIG_STATUS_XGXS0_LINK_STATUS_SIZE \ - NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS_SIZE -#define NIG_STATUS_SERDES0_LINK_STATUS \ - NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_SERDES0_LINK_STATUS -#define NIG_MASK_MI_INT \ - NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT -#define NIG_MASK_XGXS0_LINK10G \ - NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK10G -#define NIG_MASK_XGXS0_LINK_STATUS \ - NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK_STATUS -#define NIG_MASK_SERDES0_LINK_STATUS \ - NIG_MASK_INTERRUPT_PORT0_REG_MASK_SERDES0_LINK_STATUS - -#define MDIO_AN_CL73_OR_37_COMPLETE \ - (MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE | \ - MDIO_GP_STATUS_TOP_AN_STATUS1_CL37_AUTONEG_COMPLETE) - -#define XGXS_RESET_BITS \ - (MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_RSTB_HW | \ - MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_IDDQ | \ - MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN | \ - MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN_SD | \ - MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_TXD_FIFO_RSTB) - -#define SERDES_RESET_BITS \ - (MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_RSTB_HW | \ - MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_IDDQ | \ - MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN | \ - MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN_SD) - -#define AUTONEG_CL37 SHARED_HW_CFG_AN_ENABLE_CL37 -#define AUTONEG_CL73 SHARED_HW_CFG_AN_ENABLE_CL73 -#define AUTONEG_BAM SHARED_HW_CFG_AN_ENABLE_BAM -#define AUTONEG_PARALLEL \ - SHARED_HW_CFG_AN_ENABLE_PARALLEL_DETECTION -#define AUTONEG_SGMII_FIBER_AUTODET \ - SHARED_HW_CFG_AN_EN_SGMII_FIBER_AUTO_DETECT -#define AUTONEG_REMOTE_PHY SHARED_HW_CFG_AN_ENABLE_REMOTE_PHY - -#define GP_STATUS_PAUSE_RSOLUTION_TXSIDE \ - MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_TXSIDE -#define GP_STATUS_PAUSE_RSOLUTION_RXSIDE \ - MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_RXSIDE -#define GP_STATUS_SPEED_MASK \ - MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_MASK -#define GP_STATUS_10M MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10M -#define GP_STATUS_100M MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_100M -#define GP_STATUS_1G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G -#define GP_STATUS_2_5G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_2_5G -#define GP_STATUS_5G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_5G -#define GP_STATUS_6G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_6G -#define GP_STATUS_10G_HIG \ - MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_HIG -#define GP_STATUS_10G_CX4 \ - MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_CX4 -#define GP_STATUS_12G_HIG \ - MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12G_HIG -#define GP_STATUS_12_5G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12_5G -#define GP_STATUS_13G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_13G -#define GP_STATUS_15G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_15G -#define GP_STATUS_16G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_16G -#define GP_STATUS_1G_KX MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G_KX -#define GP_STATUS_10G_KX4 \ - MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KX4 - -#define LINK_10THD LINK_STATUS_SPEED_AND_DUPLEX_10THD -#define LINK_10TFD LINK_STATUS_SPEED_AND_DUPLEX_10TFD -#define LINK_100TXHD LINK_STATUS_SPEED_AND_DUPLEX_100TXHD -#define LINK_100T4 LINK_STATUS_SPEED_AND_DUPLEX_100T4 -#define LINK_100TXFD LINK_STATUS_SPEED_AND_DUPLEX_100TXFD -#define LINK_1000THD LINK_STATUS_SPEED_AND_DUPLEX_1000THD -#define LINK_1000TFD LINK_STATUS_SPEED_AND_DUPLEX_1000TFD -#define LINK_1000XFD LINK_STATUS_SPEED_AND_DUPLEX_1000XFD -#define LINK_2500THD LINK_STATUS_SPEED_AND_DUPLEX_2500THD -#define LINK_2500TFD LINK_STATUS_SPEED_AND_DUPLEX_2500TFD -#define LINK_2500XFD LINK_STATUS_SPEED_AND_DUPLEX_2500XFD -#define LINK_10GTFD LINK_STATUS_SPEED_AND_DUPLEX_10GTFD -#define LINK_10GXFD LINK_STATUS_SPEED_AND_DUPLEX_10GXFD -#define LINK_12GTFD LINK_STATUS_SPEED_AND_DUPLEX_12GTFD -#define LINK_12GXFD LINK_STATUS_SPEED_AND_DUPLEX_12GXFD -#define LINK_12_5GTFD LINK_STATUS_SPEED_AND_DUPLEX_12_5GTFD -#define LINK_12_5GXFD LINK_STATUS_SPEED_AND_DUPLEX_12_5GXFD -#define LINK_13GTFD LINK_STATUS_SPEED_AND_DUPLEX_13GTFD -#define LINK_13GXFD LINK_STATUS_SPEED_AND_DUPLEX_13GXFD -#define LINK_15GTFD LINK_STATUS_SPEED_AND_DUPLEX_15GTFD -#define LINK_15GXFD LINK_STATUS_SPEED_AND_DUPLEX_15GXFD -#define LINK_16GTFD LINK_STATUS_SPEED_AND_DUPLEX_16GTFD -#define LINK_16GXFD LINK_STATUS_SPEED_AND_DUPLEX_16GXFD - -#define PHY_XGXS_FLAG 0x1 -#define PHY_SGMII_FLAG 0x2 -#define PHY_SERDES_FLAG 0x4 - -/* */ -#define SFP_EEPROM_CON_TYPE_ADDR 0x2 - #define SFP_EEPROM_CON_TYPE_VAL_LC 0x7 - #define SFP_EEPROM_CON_TYPE_VAL_COPPER 0x21 - - -#define SFP_EEPROM_COMP_CODE_ADDR 0x3 - #define SFP_EEPROM_COMP_CODE_SR_MASK (1<<4) - #define SFP_EEPROM_COMP_CODE_LR_MASK (1<<5) - #define SFP_EEPROM_COMP_CODE_LRM_MASK (1<<6) - -#define SFP_EEPROM_FC_TX_TECH_ADDR 0x8 - #define SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_PASSIVE 0x4 - #define SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_ACTIVE 0x8 - -#define SFP_EEPROM_OPTIONS_ADDR 0x40 - #define SFP_EEPROM_OPTIONS_LINEAR_RX_OUT_MASK 0x1 -#define SFP_EEPROM_OPTIONS_SIZE 2 - -#define EDC_MODE_LINEAR 0x0022 -#define EDC_MODE_LIMITING 0x0044 -#define EDC_MODE_PASSIVE_DAC 0x0055 - - - -/**********************************************************/ -/* INTERFACE */ -/**********************************************************/ -#define CL45_WR_OVER_CL22(_bp, _port, _phy_addr, _bank, _addr, _val) \ - bnx2x_cl45_write(_bp, _port, 0, _phy_addr, \ - DEFAULT_PHY_DEV_ADDR, \ - (_bank + (_addr & 0xf)), \ - _val) - -#define CL45_RD_OVER_CL22(_bp, _port, _phy_addr, _bank, _addr, _val) \ - bnx2x_cl45_read(_bp, _port, 0, _phy_addr, \ - DEFAULT_PHY_DEV_ADDR, \ - (_bank + (_addr & 0xf)), \ - _val) - -static void bnx2x_set_serdes_access(struct link_params *params) -{ - struct bnx2x *bp = params->bp; - u32 emac_base = (params->port) ? GRCBASE_EMAC1 : GRCBASE_EMAC0; - - /* Set Clause 22 */ - REG_WR(bp, NIG_REG_SERDES0_CTRL_MD_ST + params->port*0x10, 1); - REG_WR(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM, 0x245f8000); - udelay(500); - REG_WR(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM, 0x245d000f); - udelay(500); - /* Set Clause 45 */ - REG_WR(bp, NIG_REG_SERDES0_CTRL_MD_ST + params->port*0x10, 0); -} -static void bnx2x_set_phy_mdio(struct link_params *params, u8 phy_flags) -{ - struct bnx2x *bp = params->bp; - - if (phy_flags & PHY_XGXS_FLAG) { - REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_ST + - params->port*0x18, 0); - REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + params->port*0x18, - DEFAULT_PHY_DEV_ADDR); - } else { - bnx2x_set_serdes_access(params); - - REG_WR(bp, NIG_REG_SERDES0_CTRL_MD_DEVAD + - params->port*0x10, - DEFAULT_PHY_DEV_ADDR); - } -} - -static u32 bnx2x_bits_en(struct bnx2x *bp, u32 reg, u32 bits) -{ - u32 val = REG_RD(bp, reg); - - val |= bits; - REG_WR(bp, reg, val); - return val; -} - -static u32 bnx2x_bits_dis(struct bnx2x *bp, u32 reg, u32 bits) -{ - u32 val = REG_RD(bp, reg); - - val &= ~bits; - REG_WR(bp, reg, val); - return val; -} - -static void bnx2x_emac_init(struct link_params *params, - struct link_vars *vars) -{ - /* reset and unreset the emac core */ - struct bnx2x *bp = params->bp; - u8 port = params->port; - u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; - u32 val; - u16 timeout; - - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, - (MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE << port)); - udelay(5); - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, - (MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE << port)); - - /* init emac - use read-modify-write */ - /* self clear reset */ - val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE); - EMAC_WR(bp, EMAC_REG_EMAC_MODE, (val | EMAC_MODE_RESET)); - - timeout = 200; - do { - val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE); - DP(NETIF_MSG_LINK, "EMAC reset reg is %u\n", val); - if (!timeout) { - DP(NETIF_MSG_LINK, "EMAC timeout!\n"); - return; - } - timeout--; - } while (val & EMAC_MODE_RESET); - - /* Set mac address */ - val = ((params->mac_addr[0] << 8) | - params->mac_addr[1]); - EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH, val); - - val = ((params->mac_addr[2] << 24) | - (params->mac_addr[3] << 16) | - (params->mac_addr[4] << 8) | - params->mac_addr[5]); - EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + 4, val); -} - -static u8 bnx2x_emac_enable(struct link_params *params, - struct link_vars *vars, u8 lb) -{ - struct bnx2x *bp = params->bp; - u8 port = params->port; - u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; - u32 val; - - DP(NETIF_MSG_LINK, "enabling EMAC\n"); - - /* enable emac and not bmac */ - REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + port*4, 1); - - /* for paladium */ - if (CHIP_REV_IS_EMUL(bp)) { - /* Use lane 1 (of lanes 0-3) */ - REG_WR(bp, NIG_REG_XGXS_LANE_SEL_P0 + port*4, 1); - REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL + - port*4, 1); - } - /* for fpga */ - else - - if (CHIP_REV_IS_FPGA(bp)) { - /* Use lane 1 (of lanes 0-3) */ - DP(NETIF_MSG_LINK, "bnx2x_emac_enable: Setting FPGA\n"); - - REG_WR(bp, NIG_REG_XGXS_LANE_SEL_P0 + port*4, 1); - REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, - 0); - } else - /* ASIC */ - if (vars->phy_flags & PHY_XGXS_FLAG) { - u32 ser_lane = ((params->lane_config & - PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >> - PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT); - - DP(NETIF_MSG_LINK, "XGXS\n"); - /* select the master lanes (out of 0-3) */ - REG_WR(bp, NIG_REG_XGXS_LANE_SEL_P0 + - port*4, ser_lane); - /* select XGXS */ - REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL + - port*4, 1); - - } else { /* SerDes */ - DP(NETIF_MSG_LINK, "SerDes\n"); - /* select SerDes */ - REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL + - port*4, 0); - } - - bnx2x_bits_en(bp, emac_base + EMAC_REG_EMAC_RX_MODE, - EMAC_RX_MODE_RESET); - bnx2x_bits_en(bp, emac_base + EMAC_REG_EMAC_TX_MODE, - EMAC_TX_MODE_RESET); - - if (CHIP_REV_IS_SLOW(bp)) { - /* config GMII mode */ - val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE); - EMAC_WR(bp, EMAC_REG_EMAC_MODE, - (val | EMAC_MODE_PORT_GMII)); - } else { /* ASIC */ - /* pause enable/disable */ - bnx2x_bits_dis(bp, emac_base + EMAC_REG_EMAC_RX_MODE, - EMAC_RX_MODE_FLOW_EN); - if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX) - bnx2x_bits_en(bp, emac_base + - EMAC_REG_EMAC_RX_MODE, - EMAC_RX_MODE_FLOW_EN); - - bnx2x_bits_dis(bp, emac_base + EMAC_REG_EMAC_TX_MODE, - (EMAC_TX_MODE_EXT_PAUSE_EN | - EMAC_TX_MODE_FLOW_EN)); - if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX) - bnx2x_bits_en(bp, emac_base + - EMAC_REG_EMAC_TX_MODE, - (EMAC_TX_MODE_EXT_PAUSE_EN | - EMAC_TX_MODE_FLOW_EN)); - } - - /* KEEP_VLAN_TAG, promiscuous */ - val = REG_RD(bp, emac_base + EMAC_REG_EMAC_RX_MODE); - val |= EMAC_RX_MODE_KEEP_VLAN_TAG | EMAC_RX_MODE_PROMISCUOUS; - EMAC_WR(bp, EMAC_REG_EMAC_RX_MODE, val); - - /* Set Loopback */ - val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE); - if (lb) - val |= 0x810; - else - val &= ~0x810; - EMAC_WR(bp, EMAC_REG_EMAC_MODE, val); - - /* enable emac */ - REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 1); - - /* enable emac for jumbo packets */ - EMAC_WR(bp, EMAC_REG_EMAC_RX_MTU_SIZE, - (EMAC_RX_MTU_SIZE_JUMBO_ENA | - (ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD))); - - /* strip CRC */ - REG_WR(bp, NIG_REG_NIG_INGRESS_EMAC0_NO_CRC + port*4, 0x1); - - /* disable the NIG in/out to the bmac */ - REG_WR(bp, NIG_REG_BMAC0_IN_EN + port*4, 0x0); - REG_WR(bp, NIG_REG_BMAC0_PAUSE_OUT_EN + port*4, 0x0); - REG_WR(bp, NIG_REG_BMAC0_OUT_EN + port*4, 0x0); - - /* enable the NIG in/out to the emac */ - REG_WR(bp, NIG_REG_EMAC0_IN_EN + port*4, 0x1); - val = 0; - if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX) - val = 1; - - REG_WR(bp, NIG_REG_EMAC0_PAUSE_OUT_EN + port*4, val); - REG_WR(bp, NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0x1); - - if (CHIP_REV_IS_EMUL(bp)) { - /* take the BigMac out of reset */ - REG_WR(bp, - GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, - (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); - - /* enable access for bmac registers */ - REG_WR(bp, NIG_REG_BMAC0_REGS_OUT_EN + port*4, 0x1); - } else - REG_WR(bp, NIG_REG_BMAC0_REGS_OUT_EN + port*4, 0x0); - - vars->mac_type = MAC_TYPE_EMAC; - return 0; -} - - - -static u8 bnx2x_bmac_enable(struct link_params *params, struct link_vars *vars, - u8 is_lb) -{ - struct bnx2x *bp = params->bp; - u8 port = params->port; - u32 bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM : - NIG_REG_INGRESS_BMAC0_MEM; - u32 wb_data[2]; - u32 val; - - DP(NETIF_MSG_LINK, "Enabling BigMAC\n"); - /* reset and unreset the BigMac */ - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, - (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); - msleep(1); - - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, - (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); - - /* enable access for bmac registers */ - REG_WR(bp, NIG_REG_BMAC0_REGS_OUT_EN + port*4, 0x1); - - /* XGXS control */ - wb_data[0] = 0x3c; - wb_data[1] = 0; - REG_WR_DMAE(bp, bmac_addr + - BIGMAC_REGISTER_BMAC_XGXS_CONTROL, - wb_data, 2); - - /* tx MAC SA */ - wb_data[0] = ((params->mac_addr[2] << 24) | - (params->mac_addr[3] << 16) | - (params->mac_addr[4] << 8) | - params->mac_addr[5]); - wb_data[1] = ((params->mac_addr[0] << 8) | - params->mac_addr[1]); - REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_TX_SOURCE_ADDR, - wb_data, 2); - - /* tx control */ - val = 0xc0; - if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX) - val |= 0x800000; - wb_data[0] = val; - wb_data[1] = 0; - REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_TX_CONTROL, - wb_data, 2); - - /* mac control */ - val = 0x3; - if (is_lb) { - val |= 0x4; - DP(NETIF_MSG_LINK, "enable bmac loopback\n"); - } - wb_data[0] = val; - wb_data[1] = 0; - REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL, - wb_data, 2); - - /* set rx mtu */ - wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD; - wb_data[1] = 0; - REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_MAX_SIZE, - wb_data, 2); - - /* rx control set to don't strip crc */ - val = 0x14; - if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX) - val |= 0x20; - wb_data[0] = val; - wb_data[1] = 0; - REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_CONTROL, - wb_data, 2); - - /* set tx mtu */ - wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD; - wb_data[1] = 0; - REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_TX_MAX_SIZE, - wb_data, 2); - - /* set cnt max size */ - wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD; - wb_data[1] = 0; - REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_CNT_MAX_SIZE, - wb_data, 2); - - /* configure safc */ - wb_data[0] = 0x1000200; - wb_data[1] = 0; - REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_LLFC_MSG_FLDS, - wb_data, 2); - /* fix for emulation */ - if (CHIP_REV_IS_EMUL(bp)) { - wb_data[0] = 0xf000; - wb_data[1] = 0; - REG_WR_DMAE(bp, - bmac_addr + BIGMAC_REGISTER_TX_PAUSE_THRESHOLD, - wb_data, 2); - } - - REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 0x1); - REG_WR(bp, NIG_REG_XGXS_LANE_SEL_P0 + port*4, 0x0); - REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + port*4, 0x0); - val = 0; - if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX) - val = 1; - REG_WR(bp, NIG_REG_BMAC0_PAUSE_OUT_EN + port*4, val); - REG_WR(bp, NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0x0); - REG_WR(bp, NIG_REG_EMAC0_IN_EN + port*4, 0x0); - REG_WR(bp, NIG_REG_EMAC0_PAUSE_OUT_EN + port*4, 0x0); - REG_WR(bp, NIG_REG_BMAC0_IN_EN + port*4, 0x1); - REG_WR(bp, NIG_REG_BMAC0_OUT_EN + port*4, 0x1); - - vars->mac_type = MAC_TYPE_BMAC; - return 0; -} - -static void bnx2x_phy_deassert(struct link_params *params, u8 phy_flags) -{ - struct bnx2x *bp = params->bp; - u32 val; - - if (phy_flags & PHY_XGXS_FLAG) { - DP(NETIF_MSG_LINK, "bnx2x_phy_deassert:XGXS\n"); - val = XGXS_RESET_BITS; - - } else { /* SerDes */ - DP(NETIF_MSG_LINK, "bnx2x_phy_deassert:SerDes\n"); - val = SERDES_RESET_BITS; - } - - val = val << (params->port*16); - - /* reset and unreset the SerDes/XGXS */ - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR, - val); - udelay(500); - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_SET, - val); - bnx2x_set_phy_mdio(params, phy_flags); -} - -void bnx2x_link_status_update(struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u8 link_10g; - u8 port = params->port; - - if (params->switch_cfg == SWITCH_CFG_1G) - vars->phy_flags = PHY_SERDES_FLAG; - else - vars->phy_flags = PHY_XGXS_FLAG; - vars->link_status = REG_RD(bp, params->shmem_base + - offsetof(struct shmem_region, - port_mb[port].link_status)); - - vars->link_up = (vars->link_status & LINK_STATUS_LINK_UP); - - if (vars->link_up) { - DP(NETIF_MSG_LINK, "phy link up\n"); - - vars->phy_link_up = 1; - vars->duplex = DUPLEX_FULL; - switch (vars->link_status & - LINK_STATUS_SPEED_AND_DUPLEX_MASK) { - case LINK_10THD: - vars->duplex = DUPLEX_HALF; - /* fall thru */ - case LINK_10TFD: - vars->line_speed = SPEED_10; - break; - - case LINK_100TXHD: - vars->duplex = DUPLEX_HALF; - /* fall thru */ - case LINK_100T4: - case LINK_100TXFD: - vars->line_speed = SPEED_100; - break; - - case LINK_1000THD: - vars->duplex = DUPLEX_HALF; - /* fall thru */ - case LINK_1000TFD: - vars->line_speed = SPEED_1000; - break; - - case LINK_2500THD: - vars->duplex = DUPLEX_HALF; - /* fall thru */ - case LINK_2500TFD: - vars->line_speed = SPEED_2500; - break; - - case LINK_10GTFD: - vars->line_speed = SPEED_10000; - break; - - case LINK_12GTFD: - vars->line_speed = SPEED_12000; - break; - - case LINK_12_5GTFD: - vars->line_speed = SPEED_12500; - break; - - case LINK_13GTFD: - vars->line_speed = SPEED_13000; - break; - - case LINK_15GTFD: - vars->line_speed = SPEED_15000; - break; - - case LINK_16GTFD: - vars->line_speed = SPEED_16000; - break; - - default: - break; - } - - if (vars->link_status & LINK_STATUS_TX_FLOW_CONTROL_ENABLED) - vars->flow_ctrl |= BNX2X_FLOW_CTRL_TX; - else - vars->flow_ctrl &= ~BNX2X_FLOW_CTRL_TX; - - if (vars->link_status & LINK_STATUS_RX_FLOW_CONTROL_ENABLED) - vars->flow_ctrl |= BNX2X_FLOW_CTRL_RX; - else - vars->flow_ctrl &= ~BNX2X_FLOW_CTRL_RX; - - if (vars->phy_flags & PHY_XGXS_FLAG) { - if (vars->line_speed && - ((vars->line_speed == SPEED_10) || - (vars->line_speed == SPEED_100))) { - vars->phy_flags |= PHY_SGMII_FLAG; - } else { - vars->phy_flags &= ~PHY_SGMII_FLAG; - } - } - - /* anything 10 and over uses the bmac */ - link_10g = ((vars->line_speed == SPEED_10000) || - (vars->line_speed == SPEED_12000) || - (vars->line_speed == SPEED_12500) || - (vars->line_speed == SPEED_13000) || - (vars->line_speed == SPEED_15000) || - (vars->line_speed == SPEED_16000)); - if (link_10g) - vars->mac_type = MAC_TYPE_BMAC; - else - vars->mac_type = MAC_TYPE_EMAC; - - } else { /* link down */ - DP(NETIF_MSG_LINK, "phy link down\n"); - - vars->phy_link_up = 0; - - vars->line_speed = 0; - vars->duplex = DUPLEX_FULL; - vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; - - /* indicate no mac active */ - vars->mac_type = MAC_TYPE_NONE; - } - - DP(NETIF_MSG_LINK, "link_status 0x%x phy_link_up %x\n", - vars->link_status, vars->phy_link_up); - DP(NETIF_MSG_LINK, "line_speed %x duplex %x flow_ctrl 0x%x\n", - vars->line_speed, vars->duplex, vars->flow_ctrl); -} - -static void bnx2x_update_mng(struct link_params *params, u32 link_status) -{ - struct bnx2x *bp = params->bp; - - REG_WR(bp, params->shmem_base + - offsetof(struct shmem_region, - port_mb[params->port].link_status), - link_status); -} - -static void bnx2x_bmac_rx_disable(struct bnx2x *bp, u8 port) -{ - u32 bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM : - NIG_REG_INGRESS_BMAC0_MEM; - u32 wb_data[2]; - u32 nig_bmac_enable = REG_RD(bp, NIG_REG_BMAC0_REGS_OUT_EN + port*4); - - /* Only if the bmac is out of reset */ - if (REG_RD(bp, MISC_REG_RESET_REG_2) & - (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port) && - nig_bmac_enable) { - - /* Clear Rx Enable bit in BMAC_CONTROL register */ - REG_RD_DMAE(bp, bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL, - wb_data, 2); - wb_data[0] &= ~BMAC_CONTROL_RX_ENABLE; - REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL, - wb_data, 2); - - msleep(1); - } -} - -static u8 bnx2x_pbf_update(struct link_params *params, u32 flow_ctrl, - u32 line_speed) -{ - struct bnx2x *bp = params->bp; - u8 port = params->port; - u32 init_crd, crd; - u32 count = 1000; - - /* disable port */ - REG_WR(bp, PBF_REG_DISABLE_NEW_TASK_PROC_P0 + port*4, 0x1); - - /* wait for init credit */ - init_crd = REG_RD(bp, PBF_REG_P0_INIT_CRD + port*4); - crd = REG_RD(bp, PBF_REG_P0_CREDIT + port*8); - DP(NETIF_MSG_LINK, "init_crd 0x%x crd 0x%x\n", init_crd, crd); - - while ((init_crd != crd) && count) { - msleep(5); - - crd = REG_RD(bp, PBF_REG_P0_CREDIT + port*8); - count--; - } - crd = REG_RD(bp, PBF_REG_P0_CREDIT + port*8); - if (init_crd != crd) { - DP(NETIF_MSG_LINK, "BUG! init_crd 0x%x != crd 0x%x\n", - init_crd, crd); - return -EINVAL; - } - - if (flow_ctrl & BNX2X_FLOW_CTRL_RX || - line_speed == SPEED_10 || - line_speed == SPEED_100 || - line_speed == SPEED_1000 || - line_speed == SPEED_2500) { - REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, 1); - /* update threshold */ - REG_WR(bp, PBF_REG_P0_ARB_THRSH + port*4, 0); - /* update init credit */ - init_crd = 778; /* (800-18-4) */ - - } else { - u32 thresh = (ETH_MAX_JUMBO_PACKET_SIZE + - ETH_OVREHEAD)/16; - REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, 0); - /* update threshold */ - REG_WR(bp, PBF_REG_P0_ARB_THRSH + port*4, thresh); - /* update init credit */ - switch (line_speed) { - case SPEED_10000: - init_crd = thresh + 553 - 22; - break; - - case SPEED_12000: - init_crd = thresh + 664 - 22; - break; - - case SPEED_13000: - init_crd = thresh + 742 - 22; - break; - - case SPEED_16000: - init_crd = thresh + 778 - 22; - break; - default: - DP(NETIF_MSG_LINK, "Invalid line_speed 0x%x\n", - line_speed); - return -EINVAL; - } - } - REG_WR(bp, PBF_REG_P0_INIT_CRD + port*4, init_crd); - DP(NETIF_MSG_LINK, "PBF updated to speed %d credit %d\n", - line_speed, init_crd); - - /* probe the credit changes */ - REG_WR(bp, PBF_REG_INIT_P0 + port*4, 0x1); - msleep(5); - REG_WR(bp, PBF_REG_INIT_P0 + port*4, 0x0); - - /* enable port */ - REG_WR(bp, PBF_REG_DISABLE_NEW_TASK_PROC_P0 + port*4, 0x0); - return 0; -} - -static u32 bnx2x_get_emac_base(struct bnx2x *bp, u32 ext_phy_type, u8 port) -{ - u32 emac_base; - - switch (ext_phy_type) { - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072: - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726: - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727: - /* All MDC/MDIO is directed through single EMAC */ - if (REG_RD(bp, NIG_REG_PORT_SWAP)) - emac_base = GRCBASE_EMAC0; - else - emac_base = GRCBASE_EMAC1; - break; - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073: - emac_base = (port) ? GRCBASE_EMAC0 : GRCBASE_EMAC1; - break; - default: - emac_base = (port) ? GRCBASE_EMAC1 : GRCBASE_EMAC0; - break; - } - return emac_base; - -} - -u8 bnx2x_cl45_write(struct bnx2x *bp, u8 port, u32 ext_phy_type, - u8 phy_addr, u8 devad, u16 reg, u16 val) -{ - u32 tmp, saved_mode; - u8 i, rc = 0; - u32 mdio_ctrl = bnx2x_get_emac_base(bp, ext_phy_type, port); - - /* set clause 45 mode, slow down the MDIO clock to 2.5MHz - * (a value of 49==0x31) and make sure that the AUTO poll is off - */ - - saved_mode = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); - tmp = saved_mode & ~(EMAC_MDIO_MODE_AUTO_POLL | - EMAC_MDIO_MODE_CLOCK_CNT); - tmp |= (EMAC_MDIO_MODE_CLAUSE_45 | - (49 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT)); - REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, tmp); - REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); - udelay(40); - - /* address */ - - tmp = ((phy_addr << 21) | (devad << 16) | reg | - EMAC_MDIO_COMM_COMMAND_ADDRESS | - EMAC_MDIO_COMM_START_BUSY); - REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp); - - for (i = 0; i < 50; i++) { - udelay(10); - - tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM); - if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) { - udelay(5); - break; - } - } - if (tmp & EMAC_MDIO_COMM_START_BUSY) { - DP(NETIF_MSG_LINK, "write phy register failed\n"); - rc = -EFAULT; - } else { - /* data */ - tmp = ((phy_addr << 21) | (devad << 16) | val | - EMAC_MDIO_COMM_COMMAND_WRITE_45 | - EMAC_MDIO_COMM_START_BUSY); - REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp); - - for (i = 0; i < 50; i++) { - udelay(10); - - tmp = REG_RD(bp, mdio_ctrl + - EMAC_REG_EMAC_MDIO_COMM); - if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) { - udelay(5); - break; - } - } - if (tmp & EMAC_MDIO_COMM_START_BUSY) { - DP(NETIF_MSG_LINK, "write phy register failed\n"); - rc = -EFAULT; - } - } - - /* Restore the saved mode */ - REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, saved_mode); - - return rc; -} - -u8 bnx2x_cl45_read(struct bnx2x *bp, u8 port, u32 ext_phy_type, - u8 phy_addr, u8 devad, u16 reg, u16 *ret_val) -{ - u32 val, saved_mode; - u16 i; - u8 rc = 0; - - u32 mdio_ctrl = bnx2x_get_emac_base(bp, ext_phy_type, port); - /* set clause 45 mode, slow down the MDIO clock to 2.5MHz - * (a value of 49==0x31) and make sure that the AUTO poll is off - */ - - saved_mode = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); - val = saved_mode & ((EMAC_MDIO_MODE_AUTO_POLL | - EMAC_MDIO_MODE_CLOCK_CNT)); - val |= (EMAC_MDIO_MODE_CLAUSE_45 | - (49L << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT)); - REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, val); - REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); - udelay(40); - - /* address */ - val = ((phy_addr << 21) | (devad << 16) | reg | - EMAC_MDIO_COMM_COMMAND_ADDRESS | - EMAC_MDIO_COMM_START_BUSY); - REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val); - - for (i = 0; i < 50; i++) { - udelay(10); - - val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM); - if (!(val & EMAC_MDIO_COMM_START_BUSY)) { - udelay(5); - break; - } - } - if (val & EMAC_MDIO_COMM_START_BUSY) { - DP(NETIF_MSG_LINK, "read phy register failed\n"); - - *ret_val = 0; - rc = -EFAULT; - - } else { - /* data */ - val = ((phy_addr << 21) | (devad << 16) | - EMAC_MDIO_COMM_COMMAND_READ_45 | - EMAC_MDIO_COMM_START_BUSY); - REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val); - - for (i = 0; i < 50; i++) { - udelay(10); - - val = REG_RD(bp, mdio_ctrl + - EMAC_REG_EMAC_MDIO_COMM); - if (!(val & EMAC_MDIO_COMM_START_BUSY)) { - *ret_val = (u16)(val & EMAC_MDIO_COMM_DATA); - break; - } - } - if (val & EMAC_MDIO_COMM_START_BUSY) { - DP(NETIF_MSG_LINK, "read phy register failed\n"); - - *ret_val = 0; - rc = -EFAULT; - } - } - - /* Restore the saved mode */ - REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, saved_mode); - - return rc; -} - -static void bnx2x_set_aer_mmd(struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u32 ser_lane; - u16 offset; - - ser_lane = ((params->lane_config & - PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >> - PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT); - - offset = (vars->phy_flags & PHY_XGXS_FLAG) ? - (params->phy_addr + ser_lane) : 0; - - CL45_WR_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_AER_BLOCK, - MDIO_AER_BLOCK_AER_REG, 0x3800 + offset); -} - -static void bnx2x_set_master_ln(struct link_params *params) -{ - struct bnx2x *bp = params->bp; - u16 new_master_ln, ser_lane; - ser_lane = ((params->lane_config & - PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >> - PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT); - - /* set the master_ln for AN */ - CL45_RD_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_XGXS_BLOCK2, - MDIO_XGXS_BLOCK2_TEST_MODE_LANE, - &new_master_ln); - - CL45_WR_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_XGXS_BLOCK2 , - MDIO_XGXS_BLOCK2_TEST_MODE_LANE, - (new_master_ln | ser_lane)); -} - -static u8 bnx2x_reset_unicore(struct link_params *params) -{ - struct bnx2x *bp = params->bp; - u16 mii_control; - u16 i; - - CL45_RD_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_COMBO_IEEE0, - MDIO_COMBO_IEEE0_MII_CONTROL, &mii_control); - - /* reset the unicore */ - CL45_WR_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_COMBO_IEEE0, - MDIO_COMBO_IEEE0_MII_CONTROL, - (mii_control | - MDIO_COMBO_IEEO_MII_CONTROL_RESET)); - if (params->switch_cfg == SWITCH_CFG_1G) - bnx2x_set_serdes_access(params); - - /* wait for the reset to self clear */ - for (i = 0; i < MDIO_ACCESS_TIMEOUT; i++) { - udelay(5); - - /* the reset erased the previous bank value */ - CL45_RD_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_COMBO_IEEE0, - MDIO_COMBO_IEEE0_MII_CONTROL, - &mii_control); - - if (!(mii_control & MDIO_COMBO_IEEO_MII_CONTROL_RESET)) { - udelay(5); - return 0; - } - } - - DP(NETIF_MSG_LINK, "BUG! XGXS is still in reset!\n"); - return -EINVAL; - -} - -static void bnx2x_set_swap_lanes(struct link_params *params) -{ - struct bnx2x *bp = params->bp; - /* Each two bits represents a lane number: - No swap is 0123 => 0x1b no need to enable the swap */ - u16 ser_lane, rx_lane_swap, tx_lane_swap; - - ser_lane = ((params->lane_config & - PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >> - PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT); - rx_lane_swap = ((params->lane_config & - PORT_HW_CFG_LANE_SWAP_CFG_RX_MASK) >> - PORT_HW_CFG_LANE_SWAP_CFG_RX_SHIFT); - tx_lane_swap = ((params->lane_config & - PORT_HW_CFG_LANE_SWAP_CFG_TX_MASK) >> - PORT_HW_CFG_LANE_SWAP_CFG_TX_SHIFT); - - if (rx_lane_swap != 0x1b) { - CL45_WR_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_XGXS_BLOCK2, - MDIO_XGXS_BLOCK2_RX_LN_SWAP, - (rx_lane_swap | - MDIO_XGXS_BLOCK2_RX_LN_SWAP_ENABLE | - MDIO_XGXS_BLOCK2_RX_LN_SWAP_FORCE_ENABLE)); - } else { - CL45_WR_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_XGXS_BLOCK2, - MDIO_XGXS_BLOCK2_RX_LN_SWAP, 0); - } - - if (tx_lane_swap != 0x1b) { - CL45_WR_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_XGXS_BLOCK2, - MDIO_XGXS_BLOCK2_TX_LN_SWAP, - (tx_lane_swap | - MDIO_XGXS_BLOCK2_TX_LN_SWAP_ENABLE)); - } else { - CL45_WR_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_XGXS_BLOCK2, - MDIO_XGXS_BLOCK2_TX_LN_SWAP, 0); - } -} - -static void bnx2x_set_parallel_detection(struct link_params *params, - u8 phy_flags) -{ - struct bnx2x *bp = params->bp; - u16 control2; - - CL45_RD_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_SERDES_DIGITAL, - MDIO_SERDES_DIGITAL_A_1000X_CONTROL2, - &control2); - if (params->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_1G) - control2 |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN; - else - control2 &= ~MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN; - DP(NETIF_MSG_LINK, "params->speed_cap_mask = 0x%x, control2 = 0x%x\n", - params->speed_cap_mask, control2); - CL45_WR_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_SERDES_DIGITAL, - MDIO_SERDES_DIGITAL_A_1000X_CONTROL2, - control2); - - if ((phy_flags & PHY_XGXS_FLAG) && - (params->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) { - DP(NETIF_MSG_LINK, "XGXS\n"); - - CL45_WR_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_10G_PARALLEL_DETECT, - MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK, - MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT); - - CL45_RD_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_10G_PARALLEL_DETECT, - MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL, - &control2); - - - control2 |= - MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN; - - CL45_WR_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_10G_PARALLEL_DETECT, - MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL, - control2); - - /* Disable parallel detection of HiG */ - CL45_WR_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_XGXS_BLOCK2, - MDIO_XGXS_BLOCK2_UNICORE_MODE_10G, - MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS | - MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS); - } -} - -static void bnx2x_set_autoneg(struct link_params *params, - struct link_vars *vars, - u8 enable_cl73) -{ - struct bnx2x *bp = params->bp; - u16 reg_val; - - /* CL37 Autoneg */ - - CL45_RD_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_COMBO_IEEE0, - MDIO_COMBO_IEEE0_MII_CONTROL, ®_val); - - /* CL37 Autoneg Enabled */ - if (vars->line_speed == SPEED_AUTO_NEG) - reg_val |= MDIO_COMBO_IEEO_MII_CONTROL_AN_EN; - else /* CL37 Autoneg Disabled */ - reg_val &= ~(MDIO_COMBO_IEEO_MII_CONTROL_AN_EN | - MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN); - - CL45_WR_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_COMBO_IEEE0, - MDIO_COMBO_IEEE0_MII_CONTROL, reg_val); - - /* Enable/Disable Autodetection */ - - CL45_RD_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_SERDES_DIGITAL, - MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, ®_val); - reg_val &= ~(MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_SIGNAL_DETECT_EN | - MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_INVERT_SIGNAL_DETECT); - reg_val |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_FIBER_MODE; - if (vars->line_speed == SPEED_AUTO_NEG) - reg_val |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET; - else - reg_val &= ~MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET; - - CL45_WR_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_SERDES_DIGITAL, - MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, reg_val); - - /* Enable TetonII and BAM autoneg */ - CL45_RD_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_BAM_NEXT_PAGE, - MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL, - ®_val); - if (vars->line_speed == SPEED_AUTO_NEG) { - /* Enable BAM aneg Mode and TetonII aneg Mode */ - reg_val |= (MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE | - MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN); - } else { - /* TetonII and BAM Autoneg Disabled */ - reg_val &= ~(MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE | - MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN); - } - CL45_WR_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_BAM_NEXT_PAGE, - MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL, - reg_val); - - if (enable_cl73) { - /* Enable Cl73 FSM status bits */ - CL45_WR_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_CL73_USERB0, - MDIO_CL73_USERB0_CL73_UCTRL, - 0xe); - - /* Enable BAM Station Manager*/ - CL45_WR_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_CL73_USERB0, - MDIO_CL73_USERB0_CL73_BAM_CTRL1, - MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_EN | - MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_STATION_MNGR_EN | - MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_NP_AFTER_BP_EN); - - /* Advertise CL73 link speeds */ - CL45_RD_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_CL73_IEEEB1, - MDIO_CL73_IEEEB1_AN_ADV2, - ®_val); - if (params->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) - reg_val |= MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4; - if (params->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_1G) - reg_val |= MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX; - - CL45_WR_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_CL73_IEEEB1, - MDIO_CL73_IEEEB1_AN_ADV2, - reg_val); - - /* CL73 Autoneg Enabled */ - reg_val = MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN; - - } else /* CL73 Autoneg Disabled */ - reg_val = 0; - - CL45_WR_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_CL73_IEEEB0, - MDIO_CL73_IEEEB0_CL73_AN_CONTROL, reg_val); -} - -/* program SerDes, forced speed */ -static void bnx2x_program_serdes(struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u16 reg_val; - - /* program duplex, disable autoneg and sgmii*/ - CL45_RD_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_COMBO_IEEE0, - MDIO_COMBO_IEEE0_MII_CONTROL, ®_val); - reg_val &= ~(MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX | - MDIO_COMBO_IEEO_MII_CONTROL_AN_EN | - MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK); - if (params->req_duplex == DUPLEX_FULL) - reg_val |= MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX; - CL45_WR_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_COMBO_IEEE0, - MDIO_COMBO_IEEE0_MII_CONTROL, reg_val); - - /* program speed - - needed only if the speed is greater than 1G (2.5G or 10G) */ - CL45_RD_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_SERDES_DIGITAL, - MDIO_SERDES_DIGITAL_MISC1, ®_val); - /* clearing the speed value before setting the right speed */ - DP(NETIF_MSG_LINK, "MDIO_REG_BANK_SERDES_DIGITAL = 0x%x\n", reg_val); - - reg_val &= ~(MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK | - MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL); - - if (!((vars->line_speed == SPEED_1000) || - (vars->line_speed == SPEED_100) || - (vars->line_speed == SPEED_10))) { - - reg_val |= (MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_156_25M | - MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL); - if (vars->line_speed == SPEED_10000) - reg_val |= - MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_CX4; - if (vars->line_speed == SPEED_13000) - reg_val |= - MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_13G; - } - - CL45_WR_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_SERDES_DIGITAL, - MDIO_SERDES_DIGITAL_MISC1, reg_val); - -} - -static void bnx2x_set_brcm_cl37_advertisment(struct link_params *params) -{ - struct bnx2x *bp = params->bp; - u16 val = 0; - - /* configure the 48 bits for BAM AN */ - - /* set extended capabilities */ - if (params->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G) - val |= MDIO_OVER_1G_UP1_2_5G; - if (params->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) - val |= MDIO_OVER_1G_UP1_10G; - CL45_WR_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_OVER_1G, - MDIO_OVER_1G_UP1, val); - - CL45_WR_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_OVER_1G, - MDIO_OVER_1G_UP3, 0x400); -} - -static void bnx2x_calc_ieee_aneg_adv(struct link_params *params, u16 *ieee_fc) -{ - struct bnx2x *bp = params->bp; - *ieee_fc = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX; - /* resolve pause mode and advertisement - * Please refer to Table 28B-3 of the 802.3ab-1999 spec */ - - switch (params->req_flow_ctrl) { - case BNX2X_FLOW_CTRL_AUTO: - if (params->req_fc_auto_adv == BNX2X_FLOW_CTRL_BOTH) { - *ieee_fc |= - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; - } else { - *ieee_fc |= - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; - } - break; - case BNX2X_FLOW_CTRL_TX: - *ieee_fc |= - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; - break; - - case BNX2X_FLOW_CTRL_RX: - case BNX2X_FLOW_CTRL_BOTH: - *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; - break; - - case BNX2X_FLOW_CTRL_NONE: - default: - *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE; - break; - } - DP(NETIF_MSG_LINK, "ieee_fc = 0x%x\n", *ieee_fc); -} - -static void bnx2x_set_ieee_aneg_advertisment(struct link_params *params, - u16 ieee_fc) -{ - struct bnx2x *bp = params->bp; - u16 val; - /* for AN, we are always publishing full duplex */ - - CL45_WR_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_COMBO_IEEE0, - MDIO_COMBO_IEEE0_AUTO_NEG_ADV, ieee_fc); - CL45_RD_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_CL73_IEEEB1, - MDIO_CL73_IEEEB1_AN_ADV1, &val); - val &= ~MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_BOTH; - val |= ((ieee_fc<<3) & MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_MASK); - CL45_WR_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_CL73_IEEEB1, - MDIO_CL73_IEEEB1_AN_ADV1, val); -} - -static void bnx2x_restart_autoneg(struct link_params *params, u8 enable_cl73) -{ - struct bnx2x *bp = params->bp; - u16 mii_control; - - DP(NETIF_MSG_LINK, "bnx2x_restart_autoneg\n"); - /* Enable and restart BAM/CL37 aneg */ - - if (enable_cl73) { - CL45_RD_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_CL73_IEEEB0, - MDIO_CL73_IEEEB0_CL73_AN_CONTROL, - &mii_control); - - CL45_WR_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_CL73_IEEEB0, - MDIO_CL73_IEEEB0_CL73_AN_CONTROL, - (mii_control | - MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN | - MDIO_CL73_IEEEB0_CL73_AN_CONTROL_RESTART_AN)); - } else { - - CL45_RD_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_COMBO_IEEE0, - MDIO_COMBO_IEEE0_MII_CONTROL, - &mii_control); - DP(NETIF_MSG_LINK, - "bnx2x_restart_autoneg mii_control before = 0x%x\n", - mii_control); - CL45_WR_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_COMBO_IEEE0, - MDIO_COMBO_IEEE0_MII_CONTROL, - (mii_control | - MDIO_COMBO_IEEO_MII_CONTROL_AN_EN | - MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN)); - } -} - -static void bnx2x_initialize_sgmii_process(struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u16 control1; - - /* in SGMII mode, the unicore is always slave */ - - CL45_RD_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_SERDES_DIGITAL, - MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, - &control1); - control1 |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_INVERT_SIGNAL_DETECT; - /* set sgmii mode (and not fiber) */ - control1 &= ~(MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_FIBER_MODE | - MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET | - MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_MSTR_MODE); - CL45_WR_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_SERDES_DIGITAL, - MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, - control1); - - /* if forced speed */ - if (!(vars->line_speed == SPEED_AUTO_NEG)) { - /* set speed, disable autoneg */ - u16 mii_control; - - CL45_RD_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_COMBO_IEEE0, - MDIO_COMBO_IEEE0_MII_CONTROL, - &mii_control); - mii_control &= ~(MDIO_COMBO_IEEO_MII_CONTROL_AN_EN | - MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK| - MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX); - - switch (vars->line_speed) { - case SPEED_100: - mii_control |= - MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_100; - break; - case SPEED_1000: - mii_control |= - MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_1000; - break; - case SPEED_10: - /* there is nothing to set for 10M */ - break; - default: - /* invalid speed for SGMII */ - DP(NETIF_MSG_LINK, "Invalid line_speed 0x%x\n", - vars->line_speed); - break; - } - - /* setting the full duplex */ - if (params->req_duplex == DUPLEX_FULL) - mii_control |= - MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX; - CL45_WR_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_COMBO_IEEE0, - MDIO_COMBO_IEEE0_MII_CONTROL, - mii_control); - - } else { /* AN mode */ - /* enable and restart AN */ - bnx2x_restart_autoneg(params, 0); - } -} - - -/* - * link management - */ - -static void bnx2x_pause_resolve(struct link_vars *vars, u32 pause_result) -{ /* LD LP */ - switch (pause_result) { /* ASYM P ASYM P */ - case 0xb: /* 1 0 1 1 */ - vars->flow_ctrl = BNX2X_FLOW_CTRL_TX; - break; - - case 0xe: /* 1 1 1 0 */ - vars->flow_ctrl = BNX2X_FLOW_CTRL_RX; - break; - - case 0x5: /* 0 1 0 1 */ - case 0x7: /* 0 1 1 1 */ - case 0xd: /* 1 1 0 1 */ - case 0xf: /* 1 1 1 1 */ - vars->flow_ctrl = BNX2X_FLOW_CTRL_BOTH; - break; - - default: - break; - } -} - -static u8 bnx2x_ext_phy_resolve_fc(struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u8 ext_phy_addr; - u16 ld_pause; /* local */ - u16 lp_pause; /* link partner */ - u16 an_complete; /* AN complete */ - u16 pause_result; - u8 ret = 0; - u32 ext_phy_type; - u8 port = params->port; - ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config); - ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config); - /* read twice */ - - bnx2x_cl45_read(bp, port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_STATUS, &an_complete); - bnx2x_cl45_read(bp, port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_STATUS, &an_complete); - - if (an_complete & MDIO_AN_REG_STATUS_AN_COMPLETE) { - ret = 1; - bnx2x_cl45_read(bp, port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_ADV_PAUSE, &ld_pause); - bnx2x_cl45_read(bp, port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_LP_AUTO_NEG, &lp_pause); - pause_result = (ld_pause & - MDIO_AN_REG_ADV_PAUSE_MASK) >> 8; - pause_result |= (lp_pause & - MDIO_AN_REG_ADV_PAUSE_MASK) >> 10; - DP(NETIF_MSG_LINK, "Ext PHY pause result 0x%x\n", - pause_result); - bnx2x_pause_resolve(vars, pause_result); - if (vars->flow_ctrl == BNX2X_FLOW_CTRL_NONE && - ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) { - bnx2x_cl45_read(bp, port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_CL37_FC_LD, &ld_pause); - - bnx2x_cl45_read(bp, port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_CL37_FC_LP, &lp_pause); - pause_result = (ld_pause & - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) >> 5; - pause_result |= (lp_pause & - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) >> 7; - - bnx2x_pause_resolve(vars, pause_result); - DP(NETIF_MSG_LINK, "Ext PHY CL37 pause result 0x%x\n", - pause_result); - } - } - return ret; -} - -static u8 bnx2x_direct_parallel_detect_used(struct link_params *params) -{ - struct bnx2x *bp = params->bp; - u16 pd_10g, status2_1000x; - CL45_RD_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_SERDES_DIGITAL, - MDIO_SERDES_DIGITAL_A_1000X_STATUS2, - &status2_1000x); - CL45_RD_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_SERDES_DIGITAL, - MDIO_SERDES_DIGITAL_A_1000X_STATUS2, - &status2_1000x); - if (status2_1000x & MDIO_SERDES_DIGITAL_A_1000X_STATUS2_AN_DISABLED) { - DP(NETIF_MSG_LINK, "1G parallel detect link on port %d\n", - params->port); - return 1; - } - - CL45_RD_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_10G_PARALLEL_DETECT, - MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS, - &pd_10g); - - if (pd_10g & MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS_PD_LINK) { - DP(NETIF_MSG_LINK, "10G parallel detect link on port %d\n", - params->port); - return 1; - } - return 0; -} - -static void bnx2x_flow_ctrl_resolve(struct link_params *params, - struct link_vars *vars, - u32 gp_status) -{ - struct bnx2x *bp = params->bp; - u16 ld_pause; /* local driver */ - u16 lp_pause; /* link partner */ - u16 pause_result; - - vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; - - /* resolve from gp_status in case of AN complete and not sgmii */ - if ((params->req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO) && - (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) && - (!(vars->phy_flags & PHY_SGMII_FLAG)) && - (XGXS_EXT_PHY_TYPE(params->ext_phy_config) == - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT)) { - if (bnx2x_direct_parallel_detect_used(params)) { - vars->flow_ctrl = params->req_fc_auto_adv; - return; - } - if ((gp_status & - (MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE | - MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_MR_LP_NP_AN_ABLE)) == - (MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE | - MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_MR_LP_NP_AN_ABLE)) { - - CL45_RD_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_CL73_IEEEB1, - MDIO_CL73_IEEEB1_AN_ADV1, - &ld_pause); - CL45_RD_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_CL73_IEEEB1, - MDIO_CL73_IEEEB1_AN_LP_ADV1, - &lp_pause); - pause_result = (ld_pause & - MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_MASK) - >> 8; - pause_result |= (lp_pause & - MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE_MASK) - >> 10; - DP(NETIF_MSG_LINK, "pause_result CL73 0x%x\n", - pause_result); - } else { - - CL45_RD_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_COMBO_IEEE0, - MDIO_COMBO_IEEE0_AUTO_NEG_ADV, - &ld_pause); - CL45_RD_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_COMBO_IEEE0, - MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1, - &lp_pause); - pause_result = (ld_pause & - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK)>>5; - pause_result |= (lp_pause & - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK)>>7; - DP(NETIF_MSG_LINK, "pause_result CL37 0x%x\n", - pause_result); - } - bnx2x_pause_resolve(vars, pause_result); - } else if ((params->req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO) && - (bnx2x_ext_phy_resolve_fc(params, vars))) { - return; - } else { - if (params->req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO) - vars->flow_ctrl = params->req_fc_auto_adv; - else - vars->flow_ctrl = params->req_flow_ctrl; - } - DP(NETIF_MSG_LINK, "flow_ctrl 0x%x\n", vars->flow_ctrl); -} - -static void bnx2x_check_fallback_to_cl37(struct link_params *params) -{ - struct bnx2x *bp = params->bp; - u16 rx_status, ustat_val, cl37_fsm_recieved; - DP(NETIF_MSG_LINK, "bnx2x_check_fallback_to_cl37\n"); - /* Step 1: Make sure signal is detected */ - CL45_RD_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_RX0, - MDIO_RX0_RX_STATUS, - &rx_status); - if ((rx_status & MDIO_RX0_RX_STATUS_SIGDET) != - (MDIO_RX0_RX_STATUS_SIGDET)) { - DP(NETIF_MSG_LINK, "Signal is not detected. Restoring CL73." - "rx_status(0x80b0) = 0x%x\n", rx_status); - CL45_WR_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_CL73_IEEEB0, - MDIO_CL73_IEEEB0_CL73_AN_CONTROL, - MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN); - return; - } - /* Step 2: Check CL73 state machine */ - CL45_RD_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_CL73_USERB0, - MDIO_CL73_USERB0_CL73_USTAT1, - &ustat_val); - if ((ustat_val & - (MDIO_CL73_USERB0_CL73_USTAT1_LINK_STATUS_CHECK | - MDIO_CL73_USERB0_CL73_USTAT1_AN_GOOD_CHECK_BAM37)) != - (MDIO_CL73_USERB0_CL73_USTAT1_LINK_STATUS_CHECK | - MDIO_CL73_USERB0_CL73_USTAT1_AN_GOOD_CHECK_BAM37)) { - DP(NETIF_MSG_LINK, "CL73 state-machine is not stable. " - "ustat_val(0x8371) = 0x%x\n", ustat_val); - return; - } - /* Step 3: Check CL37 Message Pages received to indicate LP - supports only CL37 */ - CL45_RD_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_REMOTE_PHY, - MDIO_REMOTE_PHY_MISC_RX_STATUS, - &cl37_fsm_recieved); - if ((cl37_fsm_recieved & - (MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_OVER1G_MSG | - MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_BRCM_OUI_MSG)) != - (MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_OVER1G_MSG | - MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_BRCM_OUI_MSG)) { - DP(NETIF_MSG_LINK, "No CL37 FSM were received. " - "misc_rx_status(0x8330) = 0x%x\n", - cl37_fsm_recieved); - return; - } - /* The combined cl37/cl73 fsm state information indicating that we are - connected to a device which does not support cl73, but does support - cl37 BAM. In this case we disable cl73 and restart cl37 auto-neg */ - /* Disable CL73 */ - CL45_WR_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_CL73_IEEEB0, - MDIO_CL73_IEEEB0_CL73_AN_CONTROL, - 0); - /* Restart CL37 autoneg */ - bnx2x_restart_autoneg(params, 0); - DP(NETIF_MSG_LINK, "Disabling CL73, and restarting CL37 autoneg\n"); -} -static u8 bnx2x_link_settings_status(struct link_params *params, - struct link_vars *vars, - u32 gp_status, - u8 ext_phy_link_up) -{ - struct bnx2x *bp = params->bp; - u16 new_line_speed; - u8 rc = 0; - vars->link_status = 0; - - if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS) { - DP(NETIF_MSG_LINK, "phy link up gp_status=0x%x\n", - gp_status); - - vars->phy_link_up = 1; - vars->link_status |= LINK_STATUS_LINK_UP; - - if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS) - vars->duplex = DUPLEX_FULL; - else - vars->duplex = DUPLEX_HALF; - - bnx2x_flow_ctrl_resolve(params, vars, gp_status); - - switch (gp_status & GP_STATUS_SPEED_MASK) { - case GP_STATUS_10M: - new_line_speed = SPEED_10; - if (vars->duplex == DUPLEX_FULL) - vars->link_status |= LINK_10TFD; - else - vars->link_status |= LINK_10THD; - break; - - case GP_STATUS_100M: - new_line_speed = SPEED_100; - if (vars->duplex == DUPLEX_FULL) - vars->link_status |= LINK_100TXFD; - else - vars->link_status |= LINK_100TXHD; - break; - - case GP_STATUS_1G: - case GP_STATUS_1G_KX: - new_line_speed = SPEED_1000; - if (vars->duplex == DUPLEX_FULL) - vars->link_status |= LINK_1000TFD; - else - vars->link_status |= LINK_1000THD; - break; - - case GP_STATUS_2_5G: - new_line_speed = SPEED_2500; - if (vars->duplex == DUPLEX_FULL) - vars->link_status |= LINK_2500TFD; - else - vars->link_status |= LINK_2500THD; - break; - - case GP_STATUS_5G: - case GP_STATUS_6G: - DP(NETIF_MSG_LINK, - "link speed unsupported gp_status 0x%x\n", - gp_status); - return -EINVAL; - - case GP_STATUS_10G_KX4: - case GP_STATUS_10G_HIG: - case GP_STATUS_10G_CX4: - new_line_speed = SPEED_10000; - vars->link_status |= LINK_10GTFD; - break; - - case GP_STATUS_12G_HIG: - new_line_speed = SPEED_12000; - vars->link_status |= LINK_12GTFD; - break; - - case GP_STATUS_12_5G: - new_line_speed = SPEED_12500; - vars->link_status |= LINK_12_5GTFD; - break; - - case GP_STATUS_13G: - new_line_speed = SPEED_13000; - vars->link_status |= LINK_13GTFD; - break; - - case GP_STATUS_15G: - new_line_speed = SPEED_15000; - vars->link_status |= LINK_15GTFD; - break; - - case GP_STATUS_16G: - new_line_speed = SPEED_16000; - vars->link_status |= LINK_16GTFD; - break; - - default: - DP(NETIF_MSG_LINK, - "link speed unsupported gp_status 0x%x\n", - gp_status); - return -EINVAL; - } - - /* Upon link speed change set the NIG into drain mode. - Comes to deals with possible FIFO glitch due to clk change - when speed is decreased without link down indicator */ - if (new_line_speed != vars->line_speed) { - if (XGXS_EXT_PHY_TYPE(params->ext_phy_config) != - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT && - ext_phy_link_up) { - DP(NETIF_MSG_LINK, "Internal link speed %d is" - " different than the external" - " link speed %d\n", new_line_speed, - vars->line_speed); - vars->phy_link_up = 0; - return 0; - } - REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE - + params->port*4, 0); - msleep(1); - } - vars->line_speed = new_line_speed; - vars->link_status |= LINK_STATUS_SERDES_LINK; - - if ((params->req_line_speed == SPEED_AUTO_NEG) && - ((XGXS_EXT_PHY_TYPE(params->ext_phy_config) == - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) || - (XGXS_EXT_PHY_TYPE(params->ext_phy_config) == - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) || - (XGXS_EXT_PHY_TYPE(params->ext_phy_config) == - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706) || - (XGXS_EXT_PHY_TYPE(params->ext_phy_config) == - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726))) { - vars->autoneg = AUTO_NEG_ENABLED; - - if (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) { - vars->autoneg |= AUTO_NEG_COMPLETE; - vars->link_status |= - LINK_STATUS_AUTO_NEGOTIATE_COMPLETE; - } - - vars->autoneg |= AUTO_NEG_PARALLEL_DETECTION_USED; - vars->link_status |= - LINK_STATUS_PARALLEL_DETECTION_USED; - - } - if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX) - vars->link_status |= - LINK_STATUS_TX_FLOW_CONTROL_ENABLED; - - if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX) - vars->link_status |= - LINK_STATUS_RX_FLOW_CONTROL_ENABLED; - - } else { /* link_down */ - DP(NETIF_MSG_LINK, "phy link down\n"); - - vars->phy_link_up = 0; - - vars->duplex = DUPLEX_FULL; - vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; - vars->autoneg = AUTO_NEG_DISABLED; - vars->mac_type = MAC_TYPE_NONE; - - if ((params->req_line_speed == SPEED_AUTO_NEG) && - ((XGXS_EXT_PHY_TYPE(params->ext_phy_config) == - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT))) { - /* Check signal is detected */ - bnx2x_check_fallback_to_cl37(params); - } - } - - DP(NETIF_MSG_LINK, "gp_status 0x%x phy_link_up %x line_speed %x\n", - gp_status, vars->phy_link_up, vars->line_speed); - DP(NETIF_MSG_LINK, "duplex %x flow_ctrl 0x%x" - " autoneg 0x%x\n", - vars->duplex, - vars->flow_ctrl, vars->autoneg); - DP(NETIF_MSG_LINK, "link_status 0x%x\n", vars->link_status); - - return rc; -} - -static void bnx2x_set_gmii_tx_driver(struct link_params *params) -{ - struct bnx2x *bp = params->bp; - u16 lp_up2; - u16 tx_driver; - u16 bank; - - /* read precomp */ - CL45_RD_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_OVER_1G, - MDIO_OVER_1G_LP_UP2, &lp_up2); - - /* bits [10:7] at lp_up2, positioned at [15:12] */ - lp_up2 = (((lp_up2 & MDIO_OVER_1G_LP_UP2_PREEMPHASIS_MASK) >> - MDIO_OVER_1G_LP_UP2_PREEMPHASIS_SHIFT) << - MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT); - - if (lp_up2 == 0) - return; - - for (bank = MDIO_REG_BANK_TX0; bank <= MDIO_REG_BANK_TX3; - bank += (MDIO_REG_BANK_TX1 - MDIO_REG_BANK_TX0)) { - CL45_RD_OVER_CL22(bp, params->port, - params->phy_addr, - bank, - MDIO_TX0_TX_DRIVER, &tx_driver); - - /* replace tx_driver bits [15:12] */ - if (lp_up2 != - (tx_driver & MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK)) { - tx_driver &= ~MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK; - tx_driver |= lp_up2; - CL45_WR_OVER_CL22(bp, params->port, - params->phy_addr, - bank, - MDIO_TX0_TX_DRIVER, tx_driver); - } - } -} - -static u8 bnx2x_emac_program(struct link_params *params, - u32 line_speed, u32 duplex) -{ - struct bnx2x *bp = params->bp; - u8 port = params->port; - u16 mode = 0; - - DP(NETIF_MSG_LINK, "setting link speed & duplex\n"); - bnx2x_bits_dis(bp, GRCBASE_EMAC0 + port*0x400 + - EMAC_REG_EMAC_MODE, - (EMAC_MODE_25G_MODE | - EMAC_MODE_PORT_MII_10M | - EMAC_MODE_HALF_DUPLEX)); - switch (line_speed) { - case SPEED_10: - mode |= EMAC_MODE_PORT_MII_10M; - break; - - case SPEED_100: - mode |= EMAC_MODE_PORT_MII; - break; - - case SPEED_1000: - mode |= EMAC_MODE_PORT_GMII; - break; - - case SPEED_2500: - mode |= (EMAC_MODE_25G_MODE | EMAC_MODE_PORT_GMII); - break; - - default: - /* 10G not valid for EMAC */ - DP(NETIF_MSG_LINK, "Invalid line_speed 0x%x\n", line_speed); - return -EINVAL; - } - - if (duplex == DUPLEX_HALF) - mode |= EMAC_MODE_HALF_DUPLEX; - bnx2x_bits_en(bp, - GRCBASE_EMAC0 + port*0x400 + EMAC_REG_EMAC_MODE, - mode); - - bnx2x_set_led(params, LED_MODE_OPER, line_speed); - return 0; -} - -/*****************************************************************************/ -/* External Phy section */ -/*****************************************************************************/ -void bnx2x_ext_phy_hw_reset(struct bnx2x *bp, u8 port) -{ - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, - MISC_REGISTERS_GPIO_OUTPUT_LOW, port); - msleep(1); - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, - MISC_REGISTERS_GPIO_OUTPUT_HIGH, port); -} - -static void bnx2x_ext_phy_reset(struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u32 ext_phy_type; - u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config); - - DP(NETIF_MSG_LINK, "Port %x: bnx2x_ext_phy_reset\n", params->port); - ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config); - /* The PHY reset is controled by GPIO 1 - * Give it 1ms of reset pulse - */ - if (vars->phy_flags & PHY_XGXS_FLAG) { - - switch (ext_phy_type) { - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT: - DP(NETIF_MSG_LINK, "XGXS Direct\n"); - break; - - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705: - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706: - DP(NETIF_MSG_LINK, "XGXS 8705/8706\n"); - - /* Restore normal power mode*/ - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, - MISC_REGISTERS_GPIO_OUTPUT_HIGH, - params->port); - - /* HW reset */ - bnx2x_ext_phy_hw_reset(bp, params->port); - - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_CTRL, 0xa040); - break; - - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727: - break; - - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726: - - /* Restore normal power mode*/ - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, - MISC_REGISTERS_GPIO_OUTPUT_HIGH, - params->port); - - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, - MISC_REGISTERS_GPIO_OUTPUT_HIGH, - params->port); - - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_CTRL, - 1<<15); - break; - - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072: - DP(NETIF_MSG_LINK, "XGXS 8072\n"); - - /* Unset Low Power Mode and SW reset */ - /* Restore normal power mode*/ - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, - MISC_REGISTERS_GPIO_OUTPUT_HIGH, - params->port); - - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_CTRL, - 1<<15); - break; - - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073: - DP(NETIF_MSG_LINK, "XGXS 8073\n"); - - /* Restore normal power mode*/ - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, - MISC_REGISTERS_GPIO_OUTPUT_HIGH, - params->port); - - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, - MISC_REGISTERS_GPIO_OUTPUT_HIGH, - params->port); - break; - - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101: - DP(NETIF_MSG_LINK, "XGXS SFX7101\n"); - - /* Restore normal power mode*/ - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, - MISC_REGISTERS_GPIO_OUTPUT_HIGH, - params->port); - - /* HW reset */ - bnx2x_ext_phy_hw_reset(bp, params->port); - break; - - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481: - /* Restore normal power mode*/ - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, - MISC_REGISTERS_GPIO_OUTPUT_HIGH, - params->port); - - /* HW reset */ - bnx2x_ext_phy_hw_reset(bp, params->port); - - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_CTRL, - 1<<15); - break; - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823: - break; - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE: - DP(NETIF_MSG_LINK, "XGXS PHY Failure detected\n"); - break; - - default: - DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n", - params->ext_phy_config); - break; - } - - } else { /* SerDes */ - ext_phy_type = SERDES_EXT_PHY_TYPE(params->ext_phy_config); - switch (ext_phy_type) { - case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT: - DP(NETIF_MSG_LINK, "SerDes Direct\n"); - break; - - case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482: - DP(NETIF_MSG_LINK, "SerDes 5482\n"); - bnx2x_ext_phy_hw_reset(bp, params->port); - break; - - default: - DP(NETIF_MSG_LINK, "BAD SerDes ext_phy_config 0x%x\n", - params->ext_phy_config); - break; - } - } -} - -static void bnx2x_save_spirom_version(struct bnx2x *bp, u8 port, - u32 shmem_base, u32 spirom_ver) -{ - DP(NETIF_MSG_LINK, "FW version 0x%x:0x%x for port %d\n", - (u16)(spirom_ver>>16), (u16)spirom_ver, port); - REG_WR(bp, shmem_base + - offsetof(struct shmem_region, - port_mb[port].ext_phy_fw_version), - spirom_ver); -} - -static void bnx2x_save_bcm_spirom_ver(struct bnx2x *bp, u8 port, - u32 ext_phy_type, u8 ext_phy_addr, - u32 shmem_base) -{ - u16 fw_ver1, fw_ver2; - - bnx2x_cl45_read(bp, port, ext_phy_type, ext_phy_addr, MDIO_PMA_DEVAD, - MDIO_PMA_REG_ROM_VER1, &fw_ver1); - bnx2x_cl45_read(bp, port, ext_phy_type, ext_phy_addr, MDIO_PMA_DEVAD, - MDIO_PMA_REG_ROM_VER2, &fw_ver2); - bnx2x_save_spirom_version(bp, port, shmem_base, - (u32)(fw_ver1<<16 | fw_ver2)); -} - - -static void bnx2x_save_8481_spirom_version(struct bnx2x *bp, u8 port, - u8 ext_phy_addr, u32 shmem_base) -{ - u16 val, fw_ver1, fw_ver2, cnt; - /* For the 32 bits registers in 8481, access via MDIO2ARM interface.*/ - /* (1) set register 0xc200_0014(SPI_BRIDGE_CTRL_2) to 0x03000000 */ - bnx2x_cl45_write(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481, - ext_phy_addr, MDIO_PMA_DEVAD, - 0xA819, 0x0014); - bnx2x_cl45_write(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481, - ext_phy_addr, - MDIO_PMA_DEVAD, - 0xA81A, - 0xc200); - bnx2x_cl45_write(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481, - ext_phy_addr, - MDIO_PMA_DEVAD, - 0xA81B, - 0x0000); - bnx2x_cl45_write(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481, - ext_phy_addr, - MDIO_PMA_DEVAD, - 0xA81C, - 0x0300); - bnx2x_cl45_write(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481, - ext_phy_addr, - MDIO_PMA_DEVAD, - 0xA817, - 0x0009); - - for (cnt = 0; cnt < 100; cnt++) { - bnx2x_cl45_read(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481, - ext_phy_addr, - MDIO_PMA_DEVAD, - 0xA818, - &val); - if (val & 1) - break; - udelay(5); - } - if (cnt == 100) { - DP(NETIF_MSG_LINK, "Unable to read 8481 phy fw version(1)\n"); - bnx2x_save_spirom_version(bp, port, - shmem_base, 0); - return; - } - - - /* 2) read register 0xc200_0000 (SPI_FW_STATUS) */ - bnx2x_cl45_write(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481, - ext_phy_addr, MDIO_PMA_DEVAD, - 0xA819, 0x0000); - bnx2x_cl45_write(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481, - ext_phy_addr, MDIO_PMA_DEVAD, - 0xA81A, 0xc200); - bnx2x_cl45_write(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481, - ext_phy_addr, MDIO_PMA_DEVAD, - 0xA817, 0x000A); - for (cnt = 0; cnt < 100; cnt++) { - bnx2x_cl45_read(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481, - ext_phy_addr, - MDIO_PMA_DEVAD, - 0xA818, - &val); - if (val & 1) - break; - udelay(5); - } - if (cnt == 100) { - DP(NETIF_MSG_LINK, "Unable to read 8481 phy fw version(2)\n"); - bnx2x_save_spirom_version(bp, port, - shmem_base, 0); - return; - } - - /* lower 16 bits of the register SPI_FW_STATUS */ - bnx2x_cl45_read(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481, - ext_phy_addr, - MDIO_PMA_DEVAD, - 0xA81B, - &fw_ver1); - /* upper 16 bits of register SPI_FW_STATUS */ - bnx2x_cl45_read(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481, - ext_phy_addr, - MDIO_PMA_DEVAD, - 0xA81C, - &fw_ver2); - - bnx2x_save_spirom_version(bp, port, - shmem_base, (fw_ver2<<16) | fw_ver1); -} - -static void bnx2x_bcm8072_external_rom_boot(struct link_params *params) -{ - struct bnx2x *bp = params->bp; - u8 port = params->port; - u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config); - u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config); - - /* Need to wait 200ms after reset */ - msleep(200); - /* Boot port from external ROM - * Set ser_boot_ctl bit in the MISC_CTRL1 register - */ - bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_MISC_CTRL1, 0x0001); - - /* Reset internal microprocessor */ - bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_GEN_CTRL, - MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP); - /* set micro reset = 0 */ - bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_GEN_CTRL, - MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET); - /* Reset internal microprocessor */ - bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_GEN_CTRL, - MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP); - /* wait for 100ms for code download via SPI port */ - msleep(100); - - /* Clear ser_boot_ctl bit */ - bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_MISC_CTRL1, 0x0000); - /* Wait 100ms */ - msleep(100); - - bnx2x_save_bcm_spirom_ver(bp, port, - ext_phy_type, - ext_phy_addr, - params->shmem_base); -} - -static u8 bnx2x_8073_is_snr_needed(struct link_params *params) -{ - /* This is only required for 8073A1, version 102 only */ - - struct bnx2x *bp = params->bp; - u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config); - u16 val; - - /* Read 8073 HW revision*/ - bnx2x_cl45_read(bp, params->port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8073_CHIP_REV, &val); - - if (val != 1) { - /* No need to workaround in 8073 A1 */ - return 0; - } - - bnx2x_cl45_read(bp, params->port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_ROM_VER2, &val); - - /* SNR should be applied only for version 0x102 */ - if (val != 0x102) - return 0; - - return 1; -} - -static u8 bnx2x_bcm8073_xaui_wa(struct link_params *params) -{ - struct bnx2x *bp = params->bp; - u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config); - u16 val, cnt, cnt1 ; - - bnx2x_cl45_read(bp, params->port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8073_CHIP_REV, &val); - - if (val > 0) { - /* No need to workaround in 8073 A1 */ - return 0; - } - /* XAUI workaround in 8073 A0: */ - - /* After loading the boot ROM and restarting Autoneg, - poll Dev1, Reg $C820: */ - - for (cnt = 0; cnt < 1000; cnt++) { - bnx2x_cl45_read(bp, params->port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8073_SPEED_LINK_STATUS, - &val); - /* If bit [14] = 0 or bit [13] = 0, continue on with - system initialization (XAUI work-around not required, - as these bits indicate 2.5G or 1G link up). */ - if (!(val & (1<<14)) || !(val & (1<<13))) { - DP(NETIF_MSG_LINK, "XAUI work-around not required\n"); - return 0; - } else if (!(val & (1<<15))) { - DP(NETIF_MSG_LINK, "clc bit 15 went off\n"); - /* If bit 15 is 0, then poll Dev1, Reg $C841 until - it's MSB (bit 15) goes to 1 (indicating that the - XAUI workaround has completed), - then continue on with system initialization.*/ - for (cnt1 = 0; cnt1 < 1000; cnt1++) { - bnx2x_cl45_read(bp, params->port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8073_XAUI_WA, &val); - if (val & (1<<15)) { - DP(NETIF_MSG_LINK, - "XAUI workaround has completed\n"); - return 0; - } - msleep(3); - } - break; - } - msleep(3); - } - DP(NETIF_MSG_LINK, "Warning: XAUI work-around timeout !!!\n"); - return -EINVAL; -} - -static void bnx2x_bcm8073_bcm8727_external_rom_boot(struct bnx2x *bp, u8 port, - u8 ext_phy_addr, - u32 ext_phy_type, - u32 shmem_base) -{ - /* Boot port from external ROM */ - /* EDC grst */ - bnx2x_cl45_write(bp, port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_GEN_CTRL, - 0x0001); - - /* ucode reboot and rst */ - bnx2x_cl45_write(bp, port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_GEN_CTRL, - 0x008c); - - bnx2x_cl45_write(bp, port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_MISC_CTRL1, 0x0001); - - /* Reset internal microprocessor */ - bnx2x_cl45_write(bp, port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_GEN_CTRL, - MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET); - - /* Release srst bit */ - bnx2x_cl45_write(bp, port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_GEN_CTRL, - MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP); - - /* wait for 100ms for code download via SPI port */ - msleep(100); - - /* Clear ser_boot_ctl bit */ - bnx2x_cl45_write(bp, port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_MISC_CTRL1, 0x0000); - - bnx2x_save_bcm_spirom_ver(bp, port, - ext_phy_type, - ext_phy_addr, - shmem_base); -} - -static void bnx2x_bcm8073_external_rom_boot(struct bnx2x *bp, u8 port, - u8 ext_phy_addr, - u32 shmem_base) -{ - bnx2x_bcm8073_bcm8727_external_rom_boot(bp, port, ext_phy_addr, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073, - shmem_base); -} - -static void bnx2x_bcm8727_external_rom_boot(struct bnx2x *bp, u8 port, - u8 ext_phy_addr, - u32 shmem_base) -{ - bnx2x_bcm8073_bcm8727_external_rom_boot(bp, port, ext_phy_addr, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, - shmem_base); - -} - -static void bnx2x_bcm8726_external_rom_boot(struct link_params *params) -{ - struct bnx2x *bp = params->bp; - u8 port = params->port; - u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config); - u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config); - - /* Need to wait 100ms after reset */ - msleep(100); - - /* Micro controller re-boot */ - bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_GEN_CTRL, - 0x018B); - - /* Set soft reset */ - bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_GEN_CTRL, - MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET); - - bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_MISC_CTRL1, 0x0001); - - bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_GEN_CTRL, - MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP); - - /* wait for 150ms for microcode load */ - msleep(150); - - /* Disable serial boot control, tristates pins SS_N, SCK, MOSI, MISO */ - bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_MISC_CTRL1, 0x0000); - - msleep(200); - bnx2x_save_bcm_spirom_ver(bp, port, - ext_phy_type, - ext_phy_addr, - params->shmem_base); -} - -static void bnx2x_sfp_set_transmitter(struct bnx2x *bp, u8 port, - u32 ext_phy_type, u8 ext_phy_addr, - u8 tx_en) -{ - u16 val; - - DP(NETIF_MSG_LINK, "Setting transmitter tx_en=%x for port %x\n", - tx_en, port); - /* Disable/Enable transmitter ( TX laser of the SFP+ module.)*/ - bnx2x_cl45_read(bp, port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_PHY_IDENTIFIER, - &val); - - if (tx_en) - val &= ~(1<<15); - else - val |= (1<<15); - - bnx2x_cl45_write(bp, port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_PHY_IDENTIFIER, - val); -} - -static u8 bnx2x_8726_read_sfp_module_eeprom(struct link_params *params, - u16 addr, u8 byte_cnt, u8 *o_buf) -{ - struct bnx2x *bp = params->bp; - u16 val = 0; - u16 i; - u8 port = params->port; - u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config); - u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config); - - if (byte_cnt > 16) { - DP(NETIF_MSG_LINK, "Reading from eeprom is" - " is limited to 0xf\n"); - return -EINVAL; - } - /* Set the read command byte count */ - bnx2x_cl45_write(bp, port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_SFP_TWO_WIRE_BYTE_CNT, - (byte_cnt | 0xa000)); - - /* Set the read command address */ - bnx2x_cl45_write(bp, port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_SFP_TWO_WIRE_MEM_ADDR, - addr); - - /* Activate read command */ - bnx2x_cl45_write(bp, port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, - 0x2c0f); - - /* Wait up to 500us for command complete status */ - for (i = 0; i < 100; i++) { - bnx2x_cl45_read(bp, port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, &val); - if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) == - MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE) - break; - udelay(5); - } - - if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) != - MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE) { - DP(NETIF_MSG_LINK, - "Got bad status 0x%x when reading from SFP+ EEPROM\n", - (val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK)); - return -EINVAL; - } - - /* Read the buffer */ - for (i = 0; i < byte_cnt; i++) { - bnx2x_cl45_read(bp, port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8726_TWO_WIRE_DATA_BUF + i, &val); - o_buf[i] = (u8)(val & MDIO_PMA_REG_8726_TWO_WIRE_DATA_MASK); - } - - for (i = 0; i < 100; i++) { - bnx2x_cl45_read(bp, port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, &val); - if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) == - MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IDLE) - return 0;; - msleep(1); - } - return -EINVAL; -} - -static u8 bnx2x_8727_read_sfp_module_eeprom(struct link_params *params, - u16 addr, u8 byte_cnt, u8 *o_buf) -{ - struct bnx2x *bp = params->bp; - u16 val, i; - u8 port = params->port; - u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config); - u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config); - - if (byte_cnt > 16) { - DP(NETIF_MSG_LINK, "Reading from eeprom is" - " is limited to 0xf\n"); - return -EINVAL; - } - - /* Need to read from 1.8000 to clear it */ - bnx2x_cl45_read(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, - &val); - - /* Set the read command byte count */ - bnx2x_cl45_write(bp, port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_SFP_TWO_WIRE_BYTE_CNT, - ((byte_cnt < 2) ? 2 : byte_cnt)); - - /* Set the read command address */ - bnx2x_cl45_write(bp, port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_SFP_TWO_WIRE_MEM_ADDR, - addr); - /* Set the destination address */ - bnx2x_cl45_write(bp, port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - 0x8004, - MDIO_PMA_REG_8727_TWO_WIRE_DATA_BUF); - - /* Activate read command */ - bnx2x_cl45_write(bp, port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, - 0x8002); - /* Wait appropriate time for two-wire command to finish before - polling the status register */ - msleep(1); - - /* Wait up to 500us for command complete status */ - for (i = 0; i < 100; i++) { - bnx2x_cl45_read(bp, port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, &val); - if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) == - MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE) - break; - udelay(5); - } - - if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) != - MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE) { - DP(NETIF_MSG_LINK, - "Got bad status 0x%x when reading from SFP+ EEPROM\n", - (val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK)); - return -EINVAL; - } - - /* Read the buffer */ - for (i = 0; i < byte_cnt; i++) { - bnx2x_cl45_read(bp, port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8727_TWO_WIRE_DATA_BUF + i, &val); - o_buf[i] = (u8)(val & MDIO_PMA_REG_8727_TWO_WIRE_DATA_MASK); - } - - for (i = 0; i < 100; i++) { - bnx2x_cl45_read(bp, port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, &val); - if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) == - MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IDLE) - return 0;; - msleep(1); - } - - return -EINVAL; -} - -u8 bnx2x_read_sfp_module_eeprom(struct link_params *params, u16 addr, - u8 byte_cnt, u8 *o_buf) -{ - u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config); - - if (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726) - return bnx2x_8726_read_sfp_module_eeprom(params, addr, - byte_cnt, o_buf); - else if (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727) - return bnx2x_8727_read_sfp_module_eeprom(params, addr, - byte_cnt, o_buf); - return -EINVAL; -} - -static u8 bnx2x_get_edc_mode(struct link_params *params, - u16 *edc_mode) -{ - struct bnx2x *bp = params->bp; - u8 val, check_limiting_mode = 0; - *edc_mode = EDC_MODE_LIMITING; - - /* First check for copper cable */ - if (bnx2x_read_sfp_module_eeprom(params, - SFP_EEPROM_CON_TYPE_ADDR, - 1, - &val) != 0) { - DP(NETIF_MSG_LINK, "Failed to read from SFP+ module EEPROM\n"); - return -EINVAL; - } - - switch (val) { - case SFP_EEPROM_CON_TYPE_VAL_COPPER: - { - u8 copper_module_type; - - /* Check if its active cable( includes SFP+ module) - of passive cable*/ - if (bnx2x_read_sfp_module_eeprom(params, - SFP_EEPROM_FC_TX_TECH_ADDR, - 1, - &copper_module_type) != - 0) { - DP(NETIF_MSG_LINK, - "Failed to read copper-cable-type" - " from SFP+ EEPROM\n"); - return -EINVAL; - } - - if (copper_module_type & - SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_ACTIVE) { - DP(NETIF_MSG_LINK, "Active Copper cable detected\n"); - check_limiting_mode = 1; - } else if (copper_module_type & - SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_PASSIVE) { - DP(NETIF_MSG_LINK, "Passive Copper" - " cable detected\n"); - *edc_mode = - EDC_MODE_PASSIVE_DAC; - } else { - DP(NETIF_MSG_LINK, "Unknown copper-cable-" - "type 0x%x !!!\n", copper_module_type); - return -EINVAL; - } - break; - } - case SFP_EEPROM_CON_TYPE_VAL_LC: - DP(NETIF_MSG_LINK, "Optic module detected\n"); - check_limiting_mode = 1; - break; - default: - DP(NETIF_MSG_LINK, "Unable to determine module type 0x%x !!!\n", - val); - return -EINVAL; - } - - if (check_limiting_mode) { - u8 options[SFP_EEPROM_OPTIONS_SIZE]; - if (bnx2x_read_sfp_module_eeprom(params, - SFP_EEPROM_OPTIONS_ADDR, - SFP_EEPROM_OPTIONS_SIZE, - options) != 0) { - DP(NETIF_MSG_LINK, "Failed to read Option" - " field from module EEPROM\n"); - return -EINVAL; - } - if ((options[0] & SFP_EEPROM_OPTIONS_LINEAR_RX_OUT_MASK)) - *edc_mode = EDC_MODE_LINEAR; - else - *edc_mode = EDC_MODE_LIMITING; - } - DP(NETIF_MSG_LINK, "EDC mode is set to 0x%x\n", *edc_mode); - return 0; -} - -/* This function read the relevant field from the module ( SFP+ ), - and verify it is compliant with this board */ -static u8 bnx2x_verify_sfp_module(struct link_params *params) -{ - struct bnx2x *bp = params->bp; - u32 val; - u32 fw_resp; - char vendor_name[SFP_EEPROM_VENDOR_NAME_SIZE+1]; - char vendor_pn[SFP_EEPROM_PART_NO_SIZE+1]; - - val = REG_RD(bp, params->shmem_base + - offsetof(struct shmem_region, dev_info. - port_feature_config[params->port].config)); - if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) == - PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_NO_ENFORCEMENT) { - DP(NETIF_MSG_LINK, "NOT enforcing module verification\n"); - return 0; - } - - /* Ask the FW to validate the module */ - if (!(params->feature_config_flags & - FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY)) { - DP(NETIF_MSG_LINK, "FW does not support OPT MDL " - "verification\n"); - return -EINVAL; - } - - fw_resp = bnx2x_fw_command(bp, DRV_MSG_CODE_VRFY_OPT_MDL); - if (fw_resp == FW_MSG_CODE_VRFY_OPT_MDL_SUCCESS) { - DP(NETIF_MSG_LINK, "Approved module\n"); - return 0; - } - - /* format the warning message */ - if (bnx2x_read_sfp_module_eeprom(params, - SFP_EEPROM_VENDOR_NAME_ADDR, - SFP_EEPROM_VENDOR_NAME_SIZE, - (u8 *)vendor_name)) - vendor_name[0] = '\0'; - else - vendor_name[SFP_EEPROM_VENDOR_NAME_SIZE] = '\0'; - if (bnx2x_read_sfp_module_eeprom(params, - SFP_EEPROM_PART_NO_ADDR, - SFP_EEPROM_PART_NO_SIZE, - (u8 *)vendor_pn)) - vendor_pn[0] = '\0'; - else - vendor_pn[SFP_EEPROM_PART_NO_SIZE] = '\0'; - - netdev_info(bp->dev, "Warning: Unqualified SFP+ module detected, Port %d from %s part number %s\n", - params->port, vendor_name, vendor_pn); - return -EINVAL; -} - -static u8 bnx2x_bcm8726_set_limiting_mode(struct link_params *params, - u16 edc_mode) -{ - struct bnx2x *bp = params->bp; - u8 port = params->port; - u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config); - u16 cur_limiting_mode; - - bnx2x_cl45_read(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_ROM_VER2, - &cur_limiting_mode); - DP(NETIF_MSG_LINK, "Current Limiting mode is 0x%x\n", - cur_limiting_mode); - - if (edc_mode == EDC_MODE_LIMITING) { - DP(NETIF_MSG_LINK, - "Setting LIMITING MODE\n"); - bnx2x_cl45_write(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_ROM_VER2, - EDC_MODE_LIMITING); - } else { /* LRM mode ( default )*/ - - DP(NETIF_MSG_LINK, "Setting LRM MODE\n"); - - /* Changing to LRM mode takes quite few seconds. - So do it only if current mode is limiting - ( default is LRM )*/ - if (cur_limiting_mode != EDC_MODE_LIMITING) - return 0; - - bnx2x_cl45_write(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_LRM_MODE, - 0); - bnx2x_cl45_write(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_ROM_VER2, - 0x128); - bnx2x_cl45_write(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_MISC_CTRL0, - 0x4008); - bnx2x_cl45_write(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_LRM_MODE, - 0xaaaa); - } - return 0; -} - -static u8 bnx2x_bcm8727_set_limiting_mode(struct link_params *params, - u16 edc_mode) -{ - struct bnx2x *bp = params->bp; - u8 port = params->port; - u16 phy_identifier; - u16 rom_ver2_val; - u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config); - - bnx2x_cl45_read(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_PHY_IDENTIFIER, - &phy_identifier); - - bnx2x_cl45_write(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_PHY_IDENTIFIER, - (phy_identifier & ~(1<<9))); - - bnx2x_cl45_read(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_ROM_VER2, - &rom_ver2_val); - /* Keep the MSB 8-bits, and set the LSB 8-bits with the edc_mode */ - bnx2x_cl45_write(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_ROM_VER2, - (rom_ver2_val & 0xff00) | (edc_mode & 0x00ff)); - - bnx2x_cl45_write(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_PHY_IDENTIFIER, - (phy_identifier | (1<<9))); - - return 0; -} - - -static u8 bnx2x_wait_for_sfp_module_initialized(struct link_params *params) -{ - u8 val; - struct bnx2x *bp = params->bp; - u16 timeout; - /* Initialization time after hot-plug may take up to 300ms for some - phys type ( e.g. JDSU ) */ - for (timeout = 0; timeout < 60; timeout++) { - if (bnx2x_read_sfp_module_eeprom(params, 1, 1, &val) - == 0) { - DP(NETIF_MSG_LINK, "SFP+ module initialization " - "took %d ms\n", timeout * 5); - return 0; - } - msleep(5); - } - return -EINVAL; -} - -static void bnx2x_8727_power_module(struct bnx2x *bp, - struct link_params *params, - u8 ext_phy_addr, u8 is_power_up) { - /* Make sure GPIOs are not using for LED mode */ - u16 val; - u8 port = params->port; - /* - * In the GPIO register, bit 4 is use to detemine if the GPIOs are - * operating as INPUT or as OUTPUT. Bit 1 is for input, and 0 for - * output - * Bits 0-1 determine the gpios value for OUTPUT in case bit 4 val is 0 - * Bits 8-9 determine the gpios value for INPUT in case bit 4 val is 1 - * where the 1st bit is the over-current(only input), and 2nd bit is - * for power( only output ) - */ - - /* - * In case of NOC feature is disabled and power is up, set GPIO control - * as input to enable listening of over-current indication - */ - - if (!(params->feature_config_flags & - FEATURE_CONFIG_BCM8727_NOC) && is_power_up) - val = (1<<4); - else - /* - * Set GPIO control to OUTPUT, and set the power bit - * to according to the is_power_up - */ - val = ((!(is_power_up)) << 1); - - bnx2x_cl45_write(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8727_GPIO_CTRL, - val); -} - -static u8 bnx2x_sfp_module_detection(struct link_params *params) -{ - struct bnx2x *bp = params->bp; - u16 edc_mode; - u8 rc = 0; - u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config); - u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config); - u32 val = REG_RD(bp, params->shmem_base + - offsetof(struct shmem_region, dev_info. - port_feature_config[params->port].config)); - - DP(NETIF_MSG_LINK, "SFP+ module plugged in/out detected on port %d\n", - params->port); - - if (bnx2x_get_edc_mode(params, &edc_mode) != 0) { - DP(NETIF_MSG_LINK, "Failed to get valid module type\n"); - return -EINVAL; - } else if (bnx2x_verify_sfp_module(params) != - 0) { - /* check SFP+ module compatibility */ - DP(NETIF_MSG_LINK, "Module verification failed!!\n"); - rc = -EINVAL; - /* Turn on fault module-detected led */ - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0, - MISC_REGISTERS_GPIO_HIGH, - params->port); - if ((ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727) && - ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) == - PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_POWER_DOWN)) { - /* Shutdown SFP+ module */ - DP(NETIF_MSG_LINK, "Shutdown SFP+ module!!\n"); - bnx2x_8727_power_module(bp, params, - ext_phy_addr, 0); - return rc; - } - } else { - /* Turn off fault module-detected led */ - DP(NETIF_MSG_LINK, "Turn off fault module-detected led\n"); - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0, - MISC_REGISTERS_GPIO_LOW, - params->port); - } - - /* power up the SFP module */ - if (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727) - bnx2x_8727_power_module(bp, params, ext_phy_addr, 1); - - /* Check and set limiting mode / LRM mode on 8726. - On 8727 it is done automatically */ - if (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726) - bnx2x_bcm8726_set_limiting_mode(params, edc_mode); - else - bnx2x_bcm8727_set_limiting_mode(params, edc_mode); - /* - * Enable transmit for this module if the module is approved, or - * if unapproved modules should also enable the Tx laser - */ - if (rc == 0 || - (val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) != - PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER) - bnx2x_sfp_set_transmitter(bp, params->port, - ext_phy_type, ext_phy_addr, 1); - else - bnx2x_sfp_set_transmitter(bp, params->port, - ext_phy_type, ext_phy_addr, 0); - - return rc; -} - -void bnx2x_handle_module_detect_int(struct link_params *params) -{ - struct bnx2x *bp = params->bp; - u32 gpio_val; - u8 port = params->port; - - /* Set valid module led off */ - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0, - MISC_REGISTERS_GPIO_HIGH, - params->port); - - /* Get current gpio val refelecting module plugged in / out*/ - gpio_val = bnx2x_get_gpio(bp, MISC_REGISTERS_GPIO_3, port); - - /* Call the handling function in case module is detected */ - if (gpio_val == 0) { - - bnx2x_set_gpio_int(bp, MISC_REGISTERS_GPIO_3, - MISC_REGISTERS_GPIO_INT_OUTPUT_CLR, - port); - - if (bnx2x_wait_for_sfp_module_initialized(params) == - 0) - bnx2x_sfp_module_detection(params); - else - DP(NETIF_MSG_LINK, "SFP+ module is not initialized\n"); - } else { - u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config); - - u32 ext_phy_type = - XGXS_EXT_PHY_TYPE(params->ext_phy_config); - u32 val = REG_RD(bp, params->shmem_base + - offsetof(struct shmem_region, dev_info. - port_feature_config[params->port]. - config)); - - bnx2x_set_gpio_int(bp, MISC_REGISTERS_GPIO_3, - MISC_REGISTERS_GPIO_INT_OUTPUT_SET, - port); - /* Module was plugged out. */ - /* Disable transmit for this module */ - if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) == - PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER) - bnx2x_sfp_set_transmitter(bp, params->port, - ext_phy_type, ext_phy_addr, 0); - } -} - -static void bnx2x_bcm807x_force_10G(struct link_params *params) -{ - struct bnx2x *bp = params->bp; - u8 port = params->port; - u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config); - u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config); - - /* Force KR or KX */ - bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_CTRL, - 0x2040); - bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_10G_CTRL2, - 0x000b); - bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_BCM_CTRL, - 0x0000); - bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_CTRL, - 0x0000); -} - -static void bnx2x_bcm8073_set_xaui_low_power_mode(struct link_params *params) -{ - struct bnx2x *bp = params->bp; - u8 port = params->port; - u16 val; - u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config); - u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config); - - bnx2x_cl45_read(bp, params->port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8073_CHIP_REV, &val); - - if (val == 0) { - /* Mustn't set low power mode in 8073 A0 */ - return; - } - - /* Disable PLL sequencer (use read-modify-write to clear bit 13) */ - bnx2x_cl45_read(bp, port, ext_phy_type, ext_phy_addr, - MDIO_XS_DEVAD, - MDIO_XS_PLL_SEQUENCER, &val); - val &= ~(1<<13); - bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr, - MDIO_XS_DEVAD, MDIO_XS_PLL_SEQUENCER, val); - - /* PLL controls */ - bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr, - MDIO_XS_DEVAD, 0x805E, 0x1077); - bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr, - MDIO_XS_DEVAD, 0x805D, 0x0000); - bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr, - MDIO_XS_DEVAD, 0x805C, 0x030B); - bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr, - MDIO_XS_DEVAD, 0x805B, 0x1240); - bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr, - MDIO_XS_DEVAD, 0x805A, 0x2490); - - /* Tx Controls */ - bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr, - MDIO_XS_DEVAD, 0x80A7, 0x0C74); - bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr, - MDIO_XS_DEVAD, 0x80A6, 0x9041); - bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr, - MDIO_XS_DEVAD, 0x80A5, 0x4640); - - /* Rx Controls */ - bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr, - MDIO_XS_DEVAD, 0x80FE, 0x01C4); - bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr, - MDIO_XS_DEVAD, 0x80FD, 0x9249); - bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr, - MDIO_XS_DEVAD, 0x80FC, 0x2015); - - /* Enable PLL sequencer (use read-modify-write to set bit 13) */ - bnx2x_cl45_read(bp, port, ext_phy_type, ext_phy_addr, - MDIO_XS_DEVAD, - MDIO_XS_PLL_SEQUENCER, &val); - val |= (1<<13); - bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr, - MDIO_XS_DEVAD, MDIO_XS_PLL_SEQUENCER, val); -} - -static void bnx2x_8073_set_pause_cl37(struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u16 cl37_val; - u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config); - u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config); - - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_CL37_FC_LD, &cl37_val); - - cl37_val &= ~MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; - /* Please refer to Table 28B-3 of 802.3ab-1999 spec. */ - - if ((vars->ieee_fc & - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC) == - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC) { - cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC; - } - if ((vars->ieee_fc & - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) == - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) { - cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; - } - if ((vars->ieee_fc & - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) == - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) { - cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; - } - DP(NETIF_MSG_LINK, - "Ext phy AN advertize cl37 0x%x\n", cl37_val); - - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_CL37_FC_LD, cl37_val); - msleep(500); -} - -static void bnx2x_ext_phy_set_pause(struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u16 val; - u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config); - u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config); - - /* read modify write pause advertizing */ - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_ADV_PAUSE, &val); - - val &= ~MDIO_AN_REG_ADV_PAUSE_BOTH; - - /* Please refer to Table 28B-3 of 802.3ab-1999 spec. */ - - if ((vars->ieee_fc & - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) == - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) { - val |= MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC; - } - if ((vars->ieee_fc & - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) == - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) { - val |= - MDIO_AN_REG_ADV_PAUSE_PAUSE; - } - DP(NETIF_MSG_LINK, - "Ext phy AN advertize 0x%x\n", val); - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_ADV_PAUSE, val); -} -static void bnx2x_set_preemphasis(struct link_params *params) -{ - u16 bank, i = 0; - struct bnx2x *bp = params->bp; - - for (bank = MDIO_REG_BANK_RX0, i = 0; bank <= MDIO_REG_BANK_RX3; - bank += (MDIO_REG_BANK_RX1-MDIO_REG_BANK_RX0), i++) { - CL45_WR_OVER_CL22(bp, params->port, - params->phy_addr, - bank, - MDIO_RX0_RX_EQ_BOOST, - params->xgxs_config_rx[i]); - } - - for (bank = MDIO_REG_BANK_TX0, i = 0; bank <= MDIO_REG_BANK_TX3; - bank += (MDIO_REG_BANK_TX1 - MDIO_REG_BANK_TX0), i++) { - CL45_WR_OVER_CL22(bp, params->port, - params->phy_addr, - bank, - MDIO_TX0_TX_DRIVER, - params->xgxs_config_tx[i]); - } -} - - -static void bnx2x_8481_set_led4(struct link_params *params, - u32 ext_phy_type, u8 ext_phy_addr) -{ - struct bnx2x *bp = params->bp; - - /* PHYC_CTL_LED_CTL */ - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LINK_SIGNAL, 0xa482); - - /* Unmask LED4 for 10G link */ - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_SIGNAL_MASK, (1<<6)); - /* 'Interrupt Mask' */ - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - 0xFFFB, 0xFFFD); -} -static void bnx2x_8481_set_legacy_led_mode(struct link_params *params, - u32 ext_phy_type, u8 ext_phy_addr) -{ - struct bnx2x *bp = params->bp; - - /* LED1 (10G Link): Disable LED1 when 10/100/1000 link */ - /* LED2 (1G/100/10 Link): Enable LED2 when 10/100/1000 link) */ - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_8481_LEGACY_SHADOW, - (1<<15) | (0xd << 10) | (0xc<<4) | 0xe); -} - -static void bnx2x_8481_set_10G_led_mode(struct link_params *params, - u32 ext_phy_type, u8 ext_phy_addr) -{ - struct bnx2x *bp = params->bp; - u16 val1; - - /* LED1 (10G Link) */ - /* Enable continuse based on source 7(10G-link) */ - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LINK_SIGNAL, - &val1); - /* Set bit 2 to 0, and bits [1:0] to 10 */ - val1 &= ~((1<<0) | (1<<2) | (1<<7)); /* Clear bits 0,2,7*/ - val1 |= ((1<<1) | (1<<6)); /* Set bit 1, 6 */ - - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LINK_SIGNAL, - val1); - - /* Unmask LED1 for 10G link */ - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LED1_MASK, - &val1); - /* Set bit 2 to 0, and bits [1:0] to 10 */ - val1 |= (1<<7); - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LED1_MASK, - val1); - - /* LED2 (1G/100/10G Link) */ - /* Mask LED2 for 10G link */ - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LED2_MASK, - 0); - - /* Unmask LED3 for 10G link */ - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LED3_MASK, - 0x6); - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LED3_BLINK, - 0); -} - - -static void bnx2x_init_internal_phy(struct link_params *params, - struct link_vars *vars, - u8 enable_cl73) -{ - struct bnx2x *bp = params->bp; - - if (!(vars->phy_flags & PHY_SGMII_FLAG)) { - if ((XGXS_EXT_PHY_TYPE(params->ext_phy_config) == - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) && - (params->feature_config_flags & - FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) - bnx2x_set_preemphasis(params); - - /* forced speed requested? */ - if (vars->line_speed != SPEED_AUTO_NEG || - ((XGXS_EXT_PHY_TYPE(params->ext_phy_config) == - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) && - params->loopback_mode == LOOPBACK_EXT)) { - DP(NETIF_MSG_LINK, "not SGMII, no AN\n"); - - /* disable autoneg */ - bnx2x_set_autoneg(params, vars, 0); - - /* program speed and duplex */ - bnx2x_program_serdes(params, vars); - - } else { /* AN_mode */ - DP(NETIF_MSG_LINK, "not SGMII, AN\n"); - - /* AN enabled */ - bnx2x_set_brcm_cl37_advertisment(params); - - /* program duplex & pause advertisement (for aneg) */ - bnx2x_set_ieee_aneg_advertisment(params, - vars->ieee_fc); - - /* enable autoneg */ - bnx2x_set_autoneg(params, vars, enable_cl73); - - /* enable and restart AN */ - bnx2x_restart_autoneg(params, enable_cl73); - } - - } else { /* SGMII mode */ - DP(NETIF_MSG_LINK, "SGMII\n"); - - bnx2x_initialize_sgmii_process(params, vars); - } -} - -static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u32 ext_phy_type; - u8 ext_phy_addr; - u16 cnt; - u16 ctrl = 0; - u16 val = 0; - u8 rc = 0; - - if (vars->phy_flags & PHY_XGXS_FLAG) { - ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config); - - ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config); - /* Make sure that the soft reset is off (expect for the 8072: - * due to the lock, it will be done inside the specific - * handling) - */ - if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) && - (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) && - (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN) && - (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072) && - (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073)) { - /* Wait for soft reset to get cleared upto 1 sec */ - for (cnt = 0; cnt < 1000; cnt++) { - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_CTRL, &ctrl); - if (!(ctrl & (1<<15))) - break; - msleep(1); - } - DP(NETIF_MSG_LINK, "control reg 0x%x (after %d ms)\n", - ctrl, cnt); - } - - switch (ext_phy_type) { - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT: - break; - - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705: - DP(NETIF_MSG_LINK, "XGXS 8705\n"); - - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_MISC_CTRL, - 0x8288); - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_PHY_IDENTIFIER, - 0x7fbf); - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_CMU_PLL_BYPASS, - 0x0100); - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_WIS_DEVAD, - MDIO_WIS_REG_LASI_CNTL, 0x1); - - /* BCM8705 doesn't have microcode, hence the 0 */ - bnx2x_save_spirom_version(bp, params->port, - params->shmem_base, 0); - break; - - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706: - /* Wait until fw is loaded */ - for (cnt = 0; cnt < 100; cnt++) { - bnx2x_cl45_read(bp, params->port, ext_phy_type, - ext_phy_addr, MDIO_PMA_DEVAD, - MDIO_PMA_REG_ROM_VER1, &val); - if (val) - break; - msleep(10); - } - DP(NETIF_MSG_LINK, "XGXS 8706 is initialized " - "after %d ms\n", cnt); - if ((params->feature_config_flags & - FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) { - u8 i; - u16 reg; - for (i = 0; i < 4; i++) { - reg = MDIO_XS_8706_REG_BANK_RX0 + - i*(MDIO_XS_8706_REG_BANK_RX1 - - MDIO_XS_8706_REG_BANK_RX0); - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_XS_DEVAD, - reg, &val); - /* Clear first 3 bits of the control */ - val &= ~0x7; - /* Set control bits according to - configuation */ - val |= (params->xgxs_config_rx[i] & - 0x7); - DP(NETIF_MSG_LINK, "Setting RX" - "Equalizer to BCM8706 reg 0x%x" - " <-- val 0x%x\n", reg, val); - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_XS_DEVAD, - reg, val); - } - } - /* Force speed */ - if (params->req_line_speed == SPEED_10000) { - DP(NETIF_MSG_LINK, "XGXS 8706 force 10Gbps\n"); - - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_DIGITAL_CTRL, - 0x400); - bnx2x_cl45_write(bp, params->port, ext_phy_type, - ext_phy_addr, MDIO_PMA_DEVAD, - MDIO_PMA_REG_LASI_CTRL, 1); - } else { - /* Force 1Gbps using autoneg with 1G - advertisment */ - - /* Allow CL37 through CL73 */ - DP(NETIF_MSG_LINK, "XGXS 8706 AutoNeg\n"); - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_CL37_CL73, - 0x040c); - - /* Enable Full-Duplex advertisment on CL37 */ - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_CL37_FC_LP, - 0x0020); - /* Enable CL37 AN */ - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_CL37_AN, - 0x1000); - /* 1G support */ - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_ADV, (1<<5)); - - /* Enable clause 73 AN */ - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_CTRL, - 0x1200); - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_RX_ALARM_CTRL, - 0x0400); - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_LASI_CTRL, 0x0004); - - } - bnx2x_save_bcm_spirom_ver(bp, params->port, - ext_phy_type, - ext_phy_addr, - params->shmem_base); - break; - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726: - DP(NETIF_MSG_LINK, "Initializing BCM8726\n"); - bnx2x_bcm8726_external_rom_boot(params); - - /* Need to call module detected on initialization since - the module detection triggered by actual module - insertion might occur before driver is loaded, and when - driver is loaded, it reset all registers, including the - transmitter */ - bnx2x_sfp_module_detection(params); - - /* Set Flow control */ - bnx2x_ext_phy_set_pause(params, vars); - if (params->req_line_speed == SPEED_1000) { - DP(NETIF_MSG_LINK, "Setting 1G force\n"); - bnx2x_cl45_write(bp, params->port, ext_phy_type, - ext_phy_addr, MDIO_PMA_DEVAD, - MDIO_PMA_REG_CTRL, 0x40); - bnx2x_cl45_write(bp, params->port, ext_phy_type, - ext_phy_addr, MDIO_PMA_DEVAD, - MDIO_PMA_REG_10G_CTRL2, 0xD); - bnx2x_cl45_write(bp, params->port, ext_phy_type, - ext_phy_addr, MDIO_PMA_DEVAD, - MDIO_PMA_REG_LASI_CTRL, 0x5); - bnx2x_cl45_write(bp, params->port, ext_phy_type, - ext_phy_addr, MDIO_PMA_DEVAD, - MDIO_PMA_REG_RX_ALARM_CTRL, - 0x400); - } else if ((params->req_line_speed == - SPEED_AUTO_NEG) && - ((params->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_1G))) { - DP(NETIF_MSG_LINK, "Setting 1G clause37\n"); - bnx2x_cl45_write(bp, params->port, ext_phy_type, - ext_phy_addr, MDIO_AN_DEVAD, - MDIO_AN_REG_ADV, 0x20); - bnx2x_cl45_write(bp, params->port, ext_phy_type, - ext_phy_addr, MDIO_AN_DEVAD, - MDIO_AN_REG_CL37_CL73, 0x040c); - bnx2x_cl45_write(bp, params->port, ext_phy_type, - ext_phy_addr, MDIO_AN_DEVAD, - MDIO_AN_REG_CL37_FC_LD, 0x0020); - bnx2x_cl45_write(bp, params->port, ext_phy_type, - ext_phy_addr, MDIO_AN_DEVAD, - MDIO_AN_REG_CL37_AN, 0x1000); - bnx2x_cl45_write(bp, params->port, ext_phy_type, - ext_phy_addr, MDIO_AN_DEVAD, - MDIO_AN_REG_CTRL, 0x1200); - - /* Enable RX-ALARM control to receive - interrupt for 1G speed change */ - bnx2x_cl45_write(bp, params->port, ext_phy_type, - ext_phy_addr, MDIO_PMA_DEVAD, - MDIO_PMA_REG_LASI_CTRL, 0x4); - bnx2x_cl45_write(bp, params->port, ext_phy_type, - ext_phy_addr, MDIO_PMA_DEVAD, - MDIO_PMA_REG_RX_ALARM_CTRL, - 0x400); - - } else { /* Default 10G. Set only LASI control */ - bnx2x_cl45_write(bp, params->port, ext_phy_type, - ext_phy_addr, MDIO_PMA_DEVAD, - MDIO_PMA_REG_LASI_CTRL, 1); - } - - /* Set TX PreEmphasis if needed */ - if ((params->feature_config_flags & - FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) { - DP(NETIF_MSG_LINK, "Setting TX_CTRL1 0x%x," - "TX_CTRL2 0x%x\n", - params->xgxs_config_tx[0], - params->xgxs_config_tx[1]); - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8726_TX_CTRL1, - params->xgxs_config_tx[0]); - - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8726_TX_CTRL2, - params->xgxs_config_tx[1]); - } - break; - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072: - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073: - { - u16 tmp1; - u16 rx_alarm_ctrl_val; - u16 lasi_ctrl_val; - if (ext_phy_type == - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072) { - rx_alarm_ctrl_val = 0x400; - lasi_ctrl_val = 0x0004; - } else { - rx_alarm_ctrl_val = (1<<2); - lasi_ctrl_val = 0x0004; - } - - /* enable LASI */ - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_RX_ALARM_CTRL, - rx_alarm_ctrl_val); - - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_LASI_CTRL, - lasi_ctrl_val); - - bnx2x_8073_set_pause_cl37(params, vars); - - if (ext_phy_type == - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072) - bnx2x_bcm8072_external_rom_boot(params); - else - /* In case of 8073 with long xaui lines, - don't set the 8073 xaui low power*/ - bnx2x_bcm8073_set_xaui_low_power_mode(params); - - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_M8051_MSGOUT_REG, - &tmp1); - - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_RX_ALARM, &tmp1); - - DP(NETIF_MSG_LINK, "Before rom RX_ALARM(port1):" - "0x%x\n", tmp1); - - /* If this is forced speed, set to KR or KX - * (all other are not supported) - */ - if (params->loopback_mode == LOOPBACK_EXT) { - bnx2x_bcm807x_force_10G(params); - DP(NETIF_MSG_LINK, - "Forced speed 10G on 807X\n"); - break; - } else { - bnx2x_cl45_write(bp, params->port, - ext_phy_type, ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_BCM_CTRL, - 0x0002); - } - if (params->req_line_speed != SPEED_AUTO_NEG) { - if (params->req_line_speed == SPEED_10000) { - val = (1<<7); - } else if (params->req_line_speed == - SPEED_2500) { - val = (1<<5); - /* Note that 2.5G works only - when used with 1G advertisment */ - } else - val = (1<<5); - } else { - - val = 0; - if (params->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) - val |= (1<<7); - - /* Note that 2.5G works only when - used with 1G advertisment */ - if (params->speed_cap_mask & - (PORT_HW_CFG_SPEED_CAPABILITY_D0_1G | - PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G)) - val |= (1<<5); - DP(NETIF_MSG_LINK, - "807x autoneg val = 0x%x\n", val); - } - - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_ADV, val); - if (ext_phy_type == - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) { - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_8073_2_5G, &tmp1); - - if (((params->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G) && - (params->req_line_speed == - SPEED_AUTO_NEG)) || - (params->req_line_speed == - SPEED_2500)) { - u16 phy_ver; - /* Allow 2.5G for A1 and above */ - bnx2x_cl45_read(bp, params->port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8073_CHIP_REV, &phy_ver); - DP(NETIF_MSG_LINK, "Add 2.5G\n"); - if (phy_ver > 0) - tmp1 |= 1; - else - tmp1 &= 0xfffe; - } else { - DP(NETIF_MSG_LINK, "Disable 2.5G\n"); - tmp1 &= 0xfffe; - } - - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_8073_2_5G, tmp1); - } - - /* Add support for CL37 (passive mode) II */ - - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_CL37_FC_LD, - &tmp1); - - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_CL37_FC_LD, (tmp1 | - ((params->req_duplex == DUPLEX_FULL) ? - 0x20 : 0x40))); - - /* Add support for CL37 (passive mode) III */ - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_CL37_AN, 0x1000); - - if (ext_phy_type == - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) { - /* The SNR will improve about 2db by changing - BW and FEE main tap. Rest commands are executed - after link is up*/ - /*Change FFE main cursor to 5 in EDC register*/ - if (bnx2x_8073_is_snr_needed(params)) - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_EDC_FFE_MAIN, - 0xFB0C); - - /* Enable FEC (Forware Error Correction) - Request in the AN */ - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_ADV2, &tmp1); - - tmp1 |= (1<<15); - - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_ADV2, tmp1); - - } - - bnx2x_ext_phy_set_pause(params, vars); - - /* Restart autoneg */ - msleep(500); - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_CTRL, 0x1200); - DP(NETIF_MSG_LINK, "807x Autoneg Restart: " - "Advertise 1G=%x, 10G=%x\n", - ((val & (1<<5)) > 0), - ((val & (1<<7)) > 0)); - break; - } - - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727: - { - u16 tmp1; - u16 rx_alarm_ctrl_val; - u16 lasi_ctrl_val; - - /* Enable PMD link, MOD_ABS_FLT, and 1G link alarm */ - - u16 mod_abs; - rx_alarm_ctrl_val = (1<<2) | (1<<5) ; - lasi_ctrl_val = 0x0004; - - DP(NETIF_MSG_LINK, "Initializing BCM8727\n"); - /* enable LASI */ - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_RX_ALARM_CTRL, - rx_alarm_ctrl_val); - - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_LASI_CTRL, - lasi_ctrl_val); - - /* Initially configure MOD_ABS to interrupt when - module is presence( bit 8) */ - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_PHY_IDENTIFIER, &mod_abs); - /* Set EDC off by setting OPTXLOS signal input to low - (bit 9). - When the EDC is off it locks onto a reference clock and - avoids becoming 'lost'.*/ - mod_abs &= ~((1<<8) | (1<<9)); - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_PHY_IDENTIFIER, mod_abs); - - /* Make MOD_ABS give interrupt on change */ - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8727_PCS_OPT_CTRL, - &val); - val |= (1<<12); - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8727_PCS_OPT_CTRL, - val); - - /* Set 8727 GPIOs to input to allow reading from the - 8727 GPIO0 status which reflect SFP+ module - over-current */ - - bnx2x_cl45_read(bp, params->port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8727_PCS_OPT_CTRL, - &val); - val &= 0xff8f; /* Reset bits 4-6 */ - bnx2x_cl45_write(bp, params->port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8727_PCS_OPT_CTRL, - val); - - bnx2x_8727_power_module(bp, params, ext_phy_addr, 1); - bnx2x_bcm8073_set_xaui_low_power_mode(params); - - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_M8051_MSGOUT_REG, - &tmp1); - - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_RX_ALARM, &tmp1); - - /* Set option 1G speed */ - if (params->req_line_speed == SPEED_1000) { - - DP(NETIF_MSG_LINK, "Setting 1G force\n"); - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_CTRL, 0x40); - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_10G_CTRL2, 0xD); - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_10G_CTRL2, &tmp1); - DP(NETIF_MSG_LINK, "1.7 = 0x%x\n", tmp1); - - } else if ((params->req_line_speed == - SPEED_AUTO_NEG) && - ((params->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_1G))) { - - DP(NETIF_MSG_LINK, "Setting 1G clause37\n"); - bnx2x_cl45_write(bp, params->port, ext_phy_type, - ext_phy_addr, MDIO_AN_DEVAD, - MDIO_PMA_REG_8727_MISC_CTRL, 0); - bnx2x_cl45_write(bp, params->port, ext_phy_type, - ext_phy_addr, MDIO_AN_DEVAD, - MDIO_AN_REG_CL37_AN, 0x1300); - } else { - /* Since the 8727 has only single reset pin, - need to set the 10G registers although it is - default */ - bnx2x_cl45_write(bp, params->port, ext_phy_type, - ext_phy_addr, MDIO_AN_DEVAD, - MDIO_AN_REG_CTRL, 0x0020); - bnx2x_cl45_write(bp, params->port, ext_phy_type, - ext_phy_addr, MDIO_AN_DEVAD, - 0x7, 0x0100); - bnx2x_cl45_write(bp, params->port, ext_phy_type, - ext_phy_addr, MDIO_PMA_DEVAD, - MDIO_PMA_REG_CTRL, 0x2040); - bnx2x_cl45_write(bp, params->port, ext_phy_type, - ext_phy_addr, MDIO_PMA_DEVAD, - MDIO_PMA_REG_10G_CTRL2, 0x0008); - } - - /* Set 2-wire transfer rate of SFP+ module EEPROM - * to 100Khz since some DACs(direct attached cables) do - * not work at 400Khz. - */ - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8727_TWO_WIRE_SLAVE_ADDR, - 0xa001); - - /* Set TX PreEmphasis if needed */ - if ((params->feature_config_flags & - FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) { - DP(NETIF_MSG_LINK, "Setting TX_CTRL1 0x%x," - "TX_CTRL2 0x%x\n", - params->xgxs_config_tx[0], - params->xgxs_config_tx[1]); - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8727_TX_CTRL1, - params->xgxs_config_tx[0]); - - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8727_TX_CTRL2, - params->xgxs_config_tx[1]); - } - - break; - } - - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101: - { - u16 fw_ver1, fw_ver2; - DP(NETIF_MSG_LINK, - "Setting the SFX7101 LASI indication\n"); - - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_LASI_CTRL, 0x1); - DP(NETIF_MSG_LINK, - "Setting the SFX7101 LED to blink on traffic\n"); - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_7107_LED_CNTL, (1<<3)); - - bnx2x_ext_phy_set_pause(params, vars); - /* Restart autoneg */ - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_CTRL, &val); - val |= 0x200; - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_CTRL, val); - - /* Save spirom version */ - bnx2x_cl45_read(bp, params->port, ext_phy_type, - ext_phy_addr, MDIO_PMA_DEVAD, - MDIO_PMA_REG_7101_VER1, &fw_ver1); - - bnx2x_cl45_read(bp, params->port, ext_phy_type, - ext_phy_addr, MDIO_PMA_DEVAD, - MDIO_PMA_REG_7101_VER2, &fw_ver2); - - bnx2x_save_spirom_version(params->bp, params->port, - params->shmem_base, - (u32)(fw_ver1<<16 | fw_ver2)); - break; - } - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481: - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823: - /* This phy uses the NIG latch mechanism since link - indication arrives through its LED4 and not via - its LASI signal, so we get steady signal - instead of clear on read */ - bnx2x_bits_en(bp, NIG_REG_LATCH_BC_0 + params->port*4, - 1 << NIG_LATCH_BC_ENABLE_MI_INT); - - bnx2x_cl45_write(bp, params->port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_CTRL, 0x0000); - - bnx2x_8481_set_led4(params, ext_phy_type, ext_phy_addr); - if (params->req_line_speed == SPEED_AUTO_NEG) { - - u16 autoneg_val, an_1000_val, an_10_100_val; - /* set 1000 speed advertisement */ - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_8481_1000T_CTRL, - &an_1000_val); - - if (params->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_1G) { - an_1000_val |= (1<<8); - if (params->req_duplex == DUPLEX_FULL) - an_1000_val |= (1<<9); - DP(NETIF_MSG_LINK, "Advertising 1G\n"); - } else - an_1000_val &= ~((1<<8) | (1<<9)); - - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_8481_1000T_CTRL, - an_1000_val); - - /* set 100 speed advertisement */ - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_8481_LEGACY_AN_ADV, - &an_10_100_val); - - if (params->speed_cap_mask & - (PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL | - PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF)) { - an_10_100_val |= (1<<7); - if (params->req_duplex == DUPLEX_FULL) - an_10_100_val |= (1<<8); - DP(NETIF_MSG_LINK, - "Advertising 100M\n"); - } else - an_10_100_val &= ~((1<<7) | (1<<8)); - - /* set 10 speed advertisement */ - if (params->speed_cap_mask & - (PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL | - PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF)) { - an_10_100_val |= (1<<5); - if (params->req_duplex == DUPLEX_FULL) - an_10_100_val |= (1<<6); - DP(NETIF_MSG_LINK, "Advertising 10M\n"); - } - else - an_10_100_val &= ~((1<<5) | (1<<6)); - - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_8481_LEGACY_AN_ADV, - an_10_100_val); - - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_8481_LEGACY_MII_CTRL, - &autoneg_val); - - /* Disable forced speed */ - autoneg_val &= ~(1<<6|1<<13); - - /* Enable autoneg and restart autoneg - for legacy speeds */ - autoneg_val |= (1<<9|1<<12); - - if (params->req_duplex == DUPLEX_FULL) - autoneg_val |= (1<<8); - else - autoneg_val &= ~(1<<8); - - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_8481_LEGACY_MII_CTRL, - autoneg_val); - - if (params->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) { - DP(NETIF_MSG_LINK, "Advertising 10G\n"); - /* Restart autoneg for 10G*/ - - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_CTRL, 0x3200); - } - } else { - /* Force speed */ - u16 autoneg_ctrl, pma_ctrl; - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_8481_LEGACY_MII_CTRL, - &autoneg_ctrl); - - /* Disable autoneg */ - autoneg_ctrl &= ~(1<<12); - - /* Set 1000 force */ - switch (params->req_line_speed) { - case SPEED_10000: - DP(NETIF_MSG_LINK, - "Unable to set 10G force !\n"); - break; - case SPEED_1000: - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_CTRL, - &pma_ctrl); - autoneg_ctrl &= ~(1<<13); - autoneg_ctrl |= (1<<6); - pma_ctrl &= ~(1<<13); - pma_ctrl |= (1<<6); - DP(NETIF_MSG_LINK, - "Setting 1000M force\n"); - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_CTRL, - pma_ctrl); - break; - case SPEED_100: - autoneg_ctrl |= (1<<13); - autoneg_ctrl &= ~(1<<6); - DP(NETIF_MSG_LINK, - "Setting 100M force\n"); - break; - case SPEED_10: - autoneg_ctrl &= ~(1<<13); - autoneg_ctrl &= ~(1<<6); - DP(NETIF_MSG_LINK, - "Setting 10M force\n"); - break; - } - - /* Duplex mode */ - if (params->req_duplex == DUPLEX_FULL) { - autoneg_ctrl |= (1<<8); - DP(NETIF_MSG_LINK, - "Setting full duplex\n"); - } else - autoneg_ctrl &= ~(1<<8); - - /* Update autoneg ctrl and pma ctrl */ - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_8481_LEGACY_MII_CTRL, - autoneg_ctrl); - } - - /* Save spirom version */ - bnx2x_save_8481_spirom_version(bp, params->port, - ext_phy_addr, - params->shmem_base); - break; - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE: - DP(NETIF_MSG_LINK, - "XGXS PHY Failure detected 0x%x\n", - params->ext_phy_config); - rc = -EINVAL; - break; - default: - DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n", - params->ext_phy_config); - rc = -EINVAL; - break; - } - - } else { /* SerDes */ - - ext_phy_type = SERDES_EXT_PHY_TYPE(params->ext_phy_config); - switch (ext_phy_type) { - case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT: - DP(NETIF_MSG_LINK, "SerDes Direct\n"); - break; - - case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482: - DP(NETIF_MSG_LINK, "SerDes 5482\n"); - break; - - default: - DP(NETIF_MSG_LINK, "BAD SerDes ext_phy_config 0x%x\n", - params->ext_phy_config); - break; - } - } - return rc; -} - -static void bnx2x_8727_handle_mod_abs(struct link_params *params) -{ - struct bnx2x *bp = params->bp; - u16 mod_abs, rx_alarm_status; - u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config); - u32 val = REG_RD(bp, params->shmem_base + - offsetof(struct shmem_region, dev_info. - port_feature_config[params->port]. - config)); - bnx2x_cl45_read(bp, params->port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_PHY_IDENTIFIER, &mod_abs); - if (mod_abs & (1<<8)) { - - /* Module is absent */ - DP(NETIF_MSG_LINK, "MOD_ABS indication " - "show module is absent\n"); - - /* 1. Set mod_abs to detect next module - presence event - 2. Set EDC off by setting OPTXLOS signal input to low - (bit 9). - When the EDC is off it locks onto a reference clock and - avoids becoming 'lost'.*/ - mod_abs &= ~((1<<8)|(1<<9)); - bnx2x_cl45_write(bp, params->port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_PHY_IDENTIFIER, mod_abs); - - /* Clear RX alarm since it stays up as long as - the mod_abs wasn't changed */ - bnx2x_cl45_read(bp, params->port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_RX_ALARM, &rx_alarm_status); - - } else { - /* Module is present */ - DP(NETIF_MSG_LINK, "MOD_ABS indication " - "show module is present\n"); - /* First thing, disable transmitter, - and if the module is ok, the - module_detection will enable it*/ - - /* 1. Set mod_abs to detect next module - absent event ( bit 8) - 2. Restore the default polarity of the OPRXLOS signal and - this signal will then correctly indicate the presence or - absence of the Rx signal. (bit 9) */ - mod_abs |= ((1<<8)|(1<<9)); - bnx2x_cl45_write(bp, params->port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_PHY_IDENTIFIER, mod_abs); - - /* Clear RX alarm since it stays up as long as - the mod_abs wasn't changed. This is need to be done - before calling the module detection, otherwise it will clear - the link update alarm */ - bnx2x_cl45_read(bp, params->port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_RX_ALARM, &rx_alarm_status); - - - if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) == - PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER) - bnx2x_sfp_set_transmitter(bp, params->port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, - ext_phy_addr, 0); - - if (bnx2x_wait_for_sfp_module_initialized(params) - == 0) - bnx2x_sfp_module_detection(params); - else - DP(NETIF_MSG_LINK, "SFP+ module is not initialized\n"); - } - - DP(NETIF_MSG_LINK, "8727 RX_ALARM_STATUS 0x%x\n", - rx_alarm_status); - /* No need to check link status in case of - module plugged in/out */ -} - - -static u8 bnx2x_ext_phy_is_link_up(struct link_params *params, - struct link_vars *vars, - u8 is_mi_int) -{ - struct bnx2x *bp = params->bp; - u32 ext_phy_type; - u8 ext_phy_addr; - u16 val1 = 0, val2; - u16 rx_sd, pcs_status; - u8 ext_phy_link_up = 0; - u8 port = params->port; - - if (vars->phy_flags & PHY_XGXS_FLAG) { - ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config); - ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config); - switch (ext_phy_type) { - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT: - DP(NETIF_MSG_LINK, "XGXS Direct\n"); - ext_phy_link_up = 1; - break; - - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705: - DP(NETIF_MSG_LINK, "XGXS 8705\n"); - bnx2x_cl45_read(bp, params->port, ext_phy_type, - ext_phy_addr, - MDIO_WIS_DEVAD, - MDIO_WIS_REG_LASI_STATUS, &val1); - DP(NETIF_MSG_LINK, "8705 LASI status 0x%x\n", val1); - - bnx2x_cl45_read(bp, params->port, ext_phy_type, - ext_phy_addr, - MDIO_WIS_DEVAD, - MDIO_WIS_REG_LASI_STATUS, &val1); - DP(NETIF_MSG_LINK, "8705 LASI status 0x%x\n", val1); - - bnx2x_cl45_read(bp, params->port, ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_RX_SD, &rx_sd); - - bnx2x_cl45_read(bp, params->port, ext_phy_type, - ext_phy_addr, - 1, - 0xc809, &val1); - bnx2x_cl45_read(bp, params->port, ext_phy_type, - ext_phy_addr, - 1, - 0xc809, &val1); - - DP(NETIF_MSG_LINK, "8705 1.c809 val=0x%x\n", val1); - ext_phy_link_up = ((rx_sd & 0x1) && (val1 & (1<<9)) && - ((val1 & (1<<8)) == 0)); - if (ext_phy_link_up) - vars->line_speed = SPEED_10000; - break; - - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706: - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726: - DP(NETIF_MSG_LINK, "XGXS 8706/8726\n"); - /* Clear RX Alarm*/ - bnx2x_cl45_read(bp, params->port, ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_ALARM, - &val2); - /* clear LASI indication*/ - bnx2x_cl45_read(bp, params->port, ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_STATUS, - &val1); - bnx2x_cl45_read(bp, params->port, ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_STATUS, - &val2); - DP(NETIF_MSG_LINK, "8706/8726 LASI status 0x%x-->" - "0x%x\n", val1, val2); - - bnx2x_cl45_read(bp, params->port, ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_SD, - &rx_sd); - bnx2x_cl45_read(bp, params->port, ext_phy_type, - ext_phy_addr, - MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS, - &pcs_status); - bnx2x_cl45_read(bp, params->port, ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, MDIO_AN_REG_LINK_STATUS, - &val2); - bnx2x_cl45_read(bp, params->port, ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, MDIO_AN_REG_LINK_STATUS, - &val2); - - DP(NETIF_MSG_LINK, "8706/8726 rx_sd 0x%x" - " pcs_status 0x%x 1Gbps link_status 0x%x\n", - rx_sd, pcs_status, val2); - /* link is up if both bit 0 of pmd_rx_sd and - * bit 0 of pcs_status are set, or if the autoneg bit - 1 is set - */ - ext_phy_link_up = ((rx_sd & pcs_status & 0x1) || - (val2 & (1<<1))); - if (ext_phy_link_up) { - if (ext_phy_type == - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726) { - /* If transmitter is disabled, - ignore false link up indication */ - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_PHY_IDENTIFIER, - &val1); - if (val1 & (1<<15)) { - DP(NETIF_MSG_LINK, "Tx is " - "disabled\n"); - ext_phy_link_up = 0; - break; - } - } - if (val2 & (1<<1)) - vars->line_speed = SPEED_1000; - else - vars->line_speed = SPEED_10000; - } - break; - - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727: - { - u16 link_status = 0; - u16 rx_alarm_status; - /* Check the LASI */ - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_RX_ALARM, &rx_alarm_status); - - DP(NETIF_MSG_LINK, "8727 RX_ALARM_STATUS 0x%x\n", - rx_alarm_status); - - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_LASI_STATUS, &val1); - - DP(NETIF_MSG_LINK, - "8727 LASI status 0x%x\n", - val1); - - /* Clear MSG-OUT */ - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_M8051_MSGOUT_REG, - &val1); - - /* - * If a module is present and there is need to check - * for over current - */ - if (!(params->feature_config_flags & - FEATURE_CONFIG_BCM8727_NOC) && - !(rx_alarm_status & (1<<5))) { - /* Check over-current using 8727 GPIO0 input*/ - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8727_GPIO_CTRL, - &val1); - - if ((val1 & (1<<8)) == 0) { - DP(NETIF_MSG_LINK, "8727 Power fault" - " has been detected on " - "port %d\n", - params->port); - netdev_err(bp->dev, "Error: Power fault on Port %d has been detected and the power to that SFP+ module has been removed to prevent failure of the card. Please remove the SFP+ module and restart the system to clear this error.\n", - params->port); - /* - * Disable all RX_ALARMs except for - * mod_abs - */ - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_RX_ALARM_CTRL, - (1<<5)); - - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_PHY_IDENTIFIER, - &val1); - /* Wait for module_absent_event */ - val1 |= (1<<8); - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_PHY_IDENTIFIER, - val1); - /* Clear RX alarm */ - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_RX_ALARM, - &rx_alarm_status); - break; - } - } /* Over current check */ - - /* When module absent bit is set, check module */ - if (rx_alarm_status & (1<<5)) { - bnx2x_8727_handle_mod_abs(params); - /* Enable all mod_abs and link detection bits */ - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_RX_ALARM_CTRL, - ((1<<5) | (1<<2))); - } - - /* If transmitter is disabled, - ignore false link up indication */ - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_PHY_IDENTIFIER, - &val1); - if (val1 & (1<<15)) { - DP(NETIF_MSG_LINK, "Tx is disabled\n"); - ext_phy_link_up = 0; - break; - } - - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8073_SPEED_LINK_STATUS, - &link_status); - - /* Bits 0..2 --> speed detected, - bits 13..15--> link is down */ - if ((link_status & (1<<2)) && - (!(link_status & (1<<15)))) { - ext_phy_link_up = 1; - vars->line_speed = SPEED_10000; - } else if ((link_status & (1<<0)) && - (!(link_status & (1<<13)))) { - ext_phy_link_up = 1; - vars->line_speed = SPEED_1000; - DP(NETIF_MSG_LINK, - "port %x: External link" - " up in 1G\n", params->port); - } else { - ext_phy_link_up = 0; - DP(NETIF_MSG_LINK, - "port %x: External link" - " is down\n", params->port); - } - break; - } - - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072: - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073: - { - u16 link_status = 0; - u16 an1000_status = 0; - - if (ext_phy_type == - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072) { - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PCS_DEVAD, - MDIO_PCS_REG_LASI_STATUS, &val1); - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PCS_DEVAD, - MDIO_PCS_REG_LASI_STATUS, &val2); - DP(NETIF_MSG_LINK, - "870x LASI status 0x%x->0x%x\n", - val1, val2); - } else { - /* In 8073, port1 is directed through emac0 and - * port0 is directed through emac1 - */ - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_LASI_STATUS, &val1); - - DP(NETIF_MSG_LINK, - "8703 LASI status 0x%x\n", - val1); - } - - /* clear the interrupt LASI status register */ - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PCS_DEVAD, - MDIO_PCS_REG_STATUS, &val2); - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PCS_DEVAD, - MDIO_PCS_REG_STATUS, &val1); - DP(NETIF_MSG_LINK, "807x PCS status 0x%x->0x%x\n", - val2, val1); - /* Clear MSG-OUT */ - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_M8051_MSGOUT_REG, - &val1); - - /* Check the LASI */ - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_RX_ALARM, &val2); - - DP(NETIF_MSG_LINK, "KR 0x9003 0x%x\n", val2); - - /* Check the link status */ - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PCS_DEVAD, - MDIO_PCS_REG_STATUS, &val2); - DP(NETIF_MSG_LINK, "KR PCS status 0x%x\n", val2); - - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_STATUS, &val2); - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_STATUS, &val1); - ext_phy_link_up = ((val1 & 4) == 4); - DP(NETIF_MSG_LINK, "PMA_REG_STATUS=0x%x\n", val1); - if (ext_phy_type == - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) { - - if (ext_phy_link_up && - ((params->req_line_speed != - SPEED_10000))) { - if (bnx2x_bcm8073_xaui_wa(params) - != 0) { - ext_phy_link_up = 0; - break; - } - } - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_LINK_STATUS, - &an1000_status); - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_LINK_STATUS, - &an1000_status); - - /* Check the link status on 1.1.2 */ - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_STATUS, &val2); - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_STATUS, &val1); - DP(NETIF_MSG_LINK, "KR PMA status 0x%x->0x%x," - "an_link_status=0x%x\n", - val2, val1, an1000_status); - - ext_phy_link_up = (((val1 & 4) == 4) || - (an1000_status & (1<<1))); - if (ext_phy_link_up && - bnx2x_8073_is_snr_needed(params)) { - /* The SNR will improve about 2dbby - changing the BW and FEE main tap.*/ - - /* The 1st write to change FFE main - tap is set before restart AN */ - /* Change PLL Bandwidth in EDC - register */ - bnx2x_cl45_write(bp, port, ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_PLL_BANDWIDTH, - 0x26BC); - - /* Change CDR Bandwidth in EDC - register */ - bnx2x_cl45_write(bp, port, ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_CDR_BANDWIDTH, - 0x0333); - } - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8073_SPEED_LINK_STATUS, - &link_status); - - /* Bits 0..2 --> speed detected, - bits 13..15--> link is down */ - if ((link_status & (1<<2)) && - (!(link_status & (1<<15)))) { - ext_phy_link_up = 1; - vars->line_speed = SPEED_10000; - DP(NETIF_MSG_LINK, - "port %x: External link" - " up in 10G\n", params->port); - } else if ((link_status & (1<<1)) && - (!(link_status & (1<<14)))) { - ext_phy_link_up = 1; - vars->line_speed = SPEED_2500; - DP(NETIF_MSG_LINK, - "port %x: External link" - " up in 2.5G\n", params->port); - } else if ((link_status & (1<<0)) && - (!(link_status & (1<<13)))) { - ext_phy_link_up = 1; - vars->line_speed = SPEED_1000; - DP(NETIF_MSG_LINK, - "port %x: External link" - " up in 1G\n", params->port); - } else { - ext_phy_link_up = 0; - DP(NETIF_MSG_LINK, - "port %x: External link" - " is down\n", params->port); - } - } else { - /* See if 1G link is up for the 8072 */ - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_LINK_STATUS, - &an1000_status); - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_LINK_STATUS, - &an1000_status); - if (an1000_status & (1<<1)) { - ext_phy_link_up = 1; - vars->line_speed = SPEED_1000; - DP(NETIF_MSG_LINK, - "port %x: External link" - " up in 1G\n", params->port); - } else if (ext_phy_link_up) { - ext_phy_link_up = 1; - vars->line_speed = SPEED_10000; - DP(NETIF_MSG_LINK, - "port %x: External link" - " up in 10G\n", params->port); - } - } - - - break; - } - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101: - bnx2x_cl45_read(bp, params->port, ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_LASI_STATUS, &val2); - bnx2x_cl45_read(bp, params->port, ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_LASI_STATUS, &val1); - DP(NETIF_MSG_LINK, - "10G-base-T LASI status 0x%x->0x%x\n", - val2, val1); - bnx2x_cl45_read(bp, params->port, ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_STATUS, &val2); - bnx2x_cl45_read(bp, params->port, ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_STATUS, &val1); - DP(NETIF_MSG_LINK, - "10G-base-T PMA status 0x%x->0x%x\n", - val2, val1); - ext_phy_link_up = ((val1 & 4) == 4); - /* if link is up - * print the AN outcome of the SFX7101 PHY - */ - if (ext_phy_link_up) { - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_MASTER_STATUS, - &val2); - vars->line_speed = SPEED_10000; - DP(NETIF_MSG_LINK, - "SFX7101 AN status 0x%x->Master=%x\n", - val2, - (val2 & (1<<14))); - } - break; - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481: - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823: - /* Check 10G-BaseT link status */ - /* Check PMD signal ok */ - bnx2x_cl45_read(bp, params->port, ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - 0xFFFA, - &val1); - bnx2x_cl45_read(bp, params->port, ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_PMD_SIGNAL, - &val2); - DP(NETIF_MSG_LINK, "PMD_SIGNAL 1.a811 = 0x%x\n", val2); - - /* Check link 10G */ - if (val2 & (1<<11)) { - vars->line_speed = SPEED_10000; - ext_phy_link_up = 1; - bnx2x_8481_set_10G_led_mode(params, - ext_phy_type, - ext_phy_addr); - } else { /* Check Legacy speed link */ - u16 legacy_status, legacy_speed; - - /* Enable expansion register 0x42 - (Operation mode status) */ - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_8481_EXPANSION_REG_ACCESS, - 0xf42); - - /* Get legacy speed operation status */ - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_8481_EXPANSION_REG_RD_RW, - &legacy_status); - - DP(NETIF_MSG_LINK, "Legacy speed status" - " = 0x%x\n", legacy_status); - ext_phy_link_up = ((legacy_status & (1<<11)) - == (1<<11)); - if (ext_phy_link_up) { - legacy_speed = (legacy_status & (3<<9)); - if (legacy_speed == (0<<9)) - vars->line_speed = SPEED_10; - else if (legacy_speed == (1<<9)) - vars->line_speed = - SPEED_100; - else if (legacy_speed == (2<<9)) - vars->line_speed = - SPEED_1000; - else /* Should not happen */ - vars->line_speed = 0; - - if (legacy_status & (1<<8)) - vars->duplex = DUPLEX_FULL; - else - vars->duplex = DUPLEX_HALF; - - DP(NETIF_MSG_LINK, "Link is up " - "in %dMbps, is_duplex_full" - "= %d\n", - vars->line_speed, - (vars->duplex == DUPLEX_FULL)); - bnx2x_8481_set_legacy_led_mode(params, - ext_phy_type, - ext_phy_addr); - } - } - break; - default: - DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n", - params->ext_phy_config); - ext_phy_link_up = 0; - break; - } - /* Set SGMII mode for external phy */ - if (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) { - if (vars->line_speed < SPEED_1000) - vars->phy_flags |= PHY_SGMII_FLAG; - else - vars->phy_flags &= ~PHY_SGMII_FLAG; - } - - } else { /* SerDes */ - ext_phy_type = SERDES_EXT_PHY_TYPE(params->ext_phy_config); - switch (ext_phy_type) { - case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT: - DP(NETIF_MSG_LINK, "SerDes Direct\n"); - ext_phy_link_up = 1; - break; - - case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482: - DP(NETIF_MSG_LINK, "SerDes 5482\n"); - ext_phy_link_up = 1; - break; - - default: - DP(NETIF_MSG_LINK, - "BAD SerDes ext_phy_config 0x%x\n", - params->ext_phy_config); - ext_phy_link_up = 0; - break; - } - } - - return ext_phy_link_up; -} - -static void bnx2x_link_int_enable(struct link_params *params) -{ - u8 port = params->port; - u32 ext_phy_type; - u32 mask; - struct bnx2x *bp = params->bp; - - /* setting the status to report on link up - for either XGXS or SerDes */ - - if (params->switch_cfg == SWITCH_CFG_10G) { - mask = (NIG_MASK_XGXS0_LINK10G | - NIG_MASK_XGXS0_LINK_STATUS); - DP(NETIF_MSG_LINK, "enabled XGXS interrupt\n"); - ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config); - if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) && - (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) && - (ext_phy_type != - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN)) { - mask |= NIG_MASK_MI_INT; - DP(NETIF_MSG_LINK, "enabled external phy int\n"); - } - - } else { /* SerDes */ - mask = NIG_MASK_SERDES0_LINK_STATUS; - DP(NETIF_MSG_LINK, "enabled SerDes interrupt\n"); - ext_phy_type = SERDES_EXT_PHY_TYPE(params->ext_phy_config); - if ((ext_phy_type != - PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT) && - (ext_phy_type != - PORT_HW_CFG_SERDES_EXT_PHY_TYPE_NOT_CONN)) { - mask |= NIG_MASK_MI_INT; - DP(NETIF_MSG_LINK, "enabled external phy int\n"); - } - } - bnx2x_bits_en(bp, - NIG_REG_MASK_INTERRUPT_PORT0 + port*4, - mask); - - DP(NETIF_MSG_LINK, "port %x, is_xgxs %x, int_status 0x%x\n", port, - (params->switch_cfg == SWITCH_CFG_10G), - REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4)); - DP(NETIF_MSG_LINK, " int_mask 0x%x, MI_INT %x, SERDES_LINK %x\n", - REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4), - REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port*0x18), - REG_RD(bp, NIG_REG_SERDES0_STATUS_LINK_STATUS+port*0x3c)); - DP(NETIF_MSG_LINK, " 10G %x, XGXS_LINK %x\n", - REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68), - REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68)); -} - -static void bnx2x_8481_rearm_latch_signal(struct bnx2x *bp, u8 port, - u8 is_mi_int) -{ - u32 latch_status = 0, is_mi_int_status; - /* Disable the MI INT ( external phy int ) - * by writing 1 to the status register. Link down indication - * is high-active-signal, so in this case we need to write the - * status to clear the XOR - */ - /* Read Latched signals */ - latch_status = REG_RD(bp, - NIG_REG_LATCH_STATUS_0 + port*8); - is_mi_int_status = REG_RD(bp, - NIG_REG_STATUS_INTERRUPT_PORT0 + port*4); - DP(NETIF_MSG_LINK, "original_signal = 0x%x, nig_status = 0x%x," - "latch_status = 0x%x\n", - is_mi_int, is_mi_int_status, latch_status); - /* Handle only those with latched-signal=up.*/ - if (latch_status & 1) { - /* For all latched-signal=up,Write original_signal to status */ - if (is_mi_int) - bnx2x_bits_en(bp, - NIG_REG_STATUS_INTERRUPT_PORT0 - + port*4, - NIG_STATUS_EMAC0_MI_INT); - else - bnx2x_bits_dis(bp, - NIG_REG_STATUS_INTERRUPT_PORT0 - + port*4, - NIG_STATUS_EMAC0_MI_INT); - /* For all latched-signal=up : Re-Arm Latch signals */ - REG_WR(bp, NIG_REG_LATCH_STATUS_0 + port*8, - (latch_status & 0xfffe) | (latch_status & 1)); - } -} -/* - * link management - */ -static void bnx2x_link_int_ack(struct link_params *params, - struct link_vars *vars, u8 is_10g, - u8 is_mi_int) -{ - struct bnx2x *bp = params->bp; - u8 port = params->port; - - /* first reset all status - * we assume only one line will be change at a time */ - bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, - (NIG_STATUS_XGXS0_LINK10G | - NIG_STATUS_XGXS0_LINK_STATUS | - NIG_STATUS_SERDES0_LINK_STATUS)); - if ((XGXS_EXT_PHY_TYPE(params->ext_phy_config) - == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481) || - (XGXS_EXT_PHY_TYPE(params->ext_phy_config) - == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823)) { - bnx2x_8481_rearm_latch_signal(bp, port, is_mi_int); - } - if (vars->phy_link_up) { - if (is_10g) { - /* Disable the 10G link interrupt - * by writing 1 to the status register - */ - DP(NETIF_MSG_LINK, "10G XGXS phy link up\n"); - bnx2x_bits_en(bp, - NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, - NIG_STATUS_XGXS0_LINK10G); - - } else if (params->switch_cfg == SWITCH_CFG_10G) { - /* Disable the link interrupt - * by writing 1 to the relevant lane - * in the status register - */ - u32 ser_lane = ((params->lane_config & - PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >> - PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT); - - DP(NETIF_MSG_LINK, "%d speed XGXS phy link up\n", - vars->line_speed); - bnx2x_bits_en(bp, - NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, - ((1 << ser_lane) << - NIG_STATUS_XGXS0_LINK_STATUS_SIZE)); - - } else { /* SerDes */ - DP(NETIF_MSG_LINK, "SerDes phy link up\n"); - /* Disable the link interrupt - * by writing 1 to the status register - */ - bnx2x_bits_en(bp, - NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, - NIG_STATUS_SERDES0_LINK_STATUS); - } - - } else { /* link_down */ - } -} - -static u8 bnx2x_format_ver(u32 num, u8 *str, u16 len) -{ - u8 *str_ptr = str; - u32 mask = 0xf0000000; - u8 shift = 8*4; - u8 digit; - if (len < 10) { - /* Need more than 10chars for this format */ - *str_ptr = '\0'; - return -EINVAL; - } - while (shift > 0) { - - shift -= 4; - digit = ((num & mask) >> shift); - if (digit < 0xa) - *str_ptr = digit + '0'; - else - *str_ptr = digit - 0xa + 'a'; - str_ptr++; - mask = mask >> 4; - if (shift == 4*4) { - *str_ptr = ':'; - str_ptr++; - } - } - *str_ptr = '\0'; - return 0; -} - -u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded, - u8 *version, u16 len) -{ - struct bnx2x *bp; - u32 ext_phy_type = 0; - u32 spirom_ver = 0; - u8 status; - - if (version == NULL || params == NULL) - return -EINVAL; - bp = params->bp; - - spirom_ver = REG_RD(bp, params->shmem_base + - offsetof(struct shmem_region, - port_mb[params->port].ext_phy_fw_version)); - - status = 0; - /* reset the returned value to zero */ - ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config); - switch (ext_phy_type) { - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101: - - if (len < 5) - return -EINVAL; - - version[0] = (spirom_ver & 0xFF); - version[1] = (spirom_ver & 0xFF00) >> 8; - version[2] = (spirom_ver & 0xFF0000) >> 16; - version[3] = (spirom_ver & 0xFF000000) >> 24; - version[4] = '\0'; - - break; - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072: - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073: - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727: - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706: - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726: - status = bnx2x_format_ver(spirom_ver, version, len); - break; - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481: - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823: - spirom_ver = ((spirom_ver & 0xF80) >> 7) << 16 | - (spirom_ver & 0x7F); - status = bnx2x_format_ver(spirom_ver, version, len); - break; - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT: - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705: - version[0] = '\0'; - break; - - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE: - DP(NETIF_MSG_LINK, "bnx2x_get_ext_phy_fw_version:" - " type is FAILURE!\n"); - status = -EINVAL; - break; - - default: - break; - } - return status; -} - -static void bnx2x_set_xgxs_loopback(struct link_params *params, - struct link_vars *vars, - u8 is_10g) -{ - u8 port = params->port; - struct bnx2x *bp = params->bp; - - if (is_10g) { - u32 md_devad; - - DP(NETIF_MSG_LINK, "XGXS 10G loopback enable\n"); - - /* change the uni_phy_addr in the nig */ - md_devad = REG_RD(bp, (NIG_REG_XGXS0_CTRL_MD_DEVAD + - port*0x18)); - - REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + port*0x18, 0x5); - - bnx2x_cl45_write(bp, port, 0, - params->phy_addr, - 5, - (MDIO_REG_BANK_AER_BLOCK + - (MDIO_AER_BLOCK_AER_REG & 0xf)), - 0x2800); - - bnx2x_cl45_write(bp, port, 0, - params->phy_addr, - 5, - (MDIO_REG_BANK_CL73_IEEEB0 + - (MDIO_CL73_IEEEB0_CL73_AN_CONTROL & 0xf)), - 0x6041); - msleep(200); - /* set aer mmd back */ - bnx2x_set_aer_mmd(params, vars); - - /* and md_devad */ - REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + port*0x18, - md_devad); - - } else { - u16 mii_control; - - DP(NETIF_MSG_LINK, "XGXS 1G loopback enable\n"); - - CL45_RD_OVER_CL22(bp, port, - params->phy_addr, - MDIO_REG_BANK_COMBO_IEEE0, - MDIO_COMBO_IEEE0_MII_CONTROL, - &mii_control); - - CL45_WR_OVER_CL22(bp, port, - params->phy_addr, - MDIO_REG_BANK_COMBO_IEEE0, - MDIO_COMBO_IEEE0_MII_CONTROL, - (mii_control | - MDIO_COMBO_IEEO_MII_CONTROL_LOOPBACK)); - } -} - - -static void bnx2x_ext_phy_loopback(struct link_params *params) -{ - struct bnx2x *bp = params->bp; - u8 ext_phy_addr; - u32 ext_phy_type; - - if (params->switch_cfg == SWITCH_CFG_10G) { - ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config); - ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config); - /* CL37 Autoneg Enabled */ - switch (ext_phy_type) { - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT: - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN: - DP(NETIF_MSG_LINK, - "ext_phy_loopback: We should not get here\n"); - break; - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705: - DP(NETIF_MSG_LINK, "ext_phy_loopback: 8705\n"); - break; - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706: - DP(NETIF_MSG_LINK, "ext_phy_loopback: 8706\n"); - break; - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726: - DP(NETIF_MSG_LINK, "PMA/PMD ext_phy_loopback: 8726\n"); - bnx2x_cl45_write(bp, params->port, ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_CTRL, - 0x0001); - break; - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101: - /* SFX7101_XGXS_TEST1 */ - bnx2x_cl45_write(bp, params->port, ext_phy_type, - ext_phy_addr, - MDIO_XS_DEVAD, - MDIO_XS_SFX7101_XGXS_TEST1, - 0x100); - DP(NETIF_MSG_LINK, - "ext_phy_loopback: set ext phy loopback\n"); - break; - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072: - - break; - } /* switch external PHY type */ - } else { - /* serdes */ - ext_phy_type = SERDES_EXT_PHY_TYPE(params->ext_phy_config); - ext_phy_addr = (params->ext_phy_config & - PORT_HW_CFG_SERDES_EXT_PHY_ADDR_MASK) - >> PORT_HW_CFG_SERDES_EXT_PHY_ADDR_SHIFT; - } -} - - -/* - *------------------------------------------------------------------------ - * bnx2x_override_led_value - - * - * Override the led value of the requsted led - * - *------------------------------------------------------------------------ - */ -u8 bnx2x_override_led_value(struct bnx2x *bp, u8 port, - u32 led_idx, u32 value) -{ - u32 reg_val; - - /* If port 0 then use EMAC0, else use EMAC1*/ - u32 emac_base = (port) ? GRCBASE_EMAC1 : GRCBASE_EMAC0; - - DP(NETIF_MSG_LINK, - "bnx2x_override_led_value() port %x led_idx %d value %d\n", - port, led_idx, value); - - switch (led_idx) { - case 0: /* 10MB led */ - /* Read the current value of the LED register in - the EMAC block */ - reg_val = REG_RD(bp, emac_base + EMAC_REG_EMAC_LED); - /* Set the OVERRIDE bit to 1 */ - reg_val |= EMAC_LED_OVERRIDE; - /* If value is 1, set the 10M_OVERRIDE bit, - otherwise reset it.*/ - reg_val = (value == 1) ? (reg_val | EMAC_LED_10MB_OVERRIDE) : - (reg_val & ~EMAC_LED_10MB_OVERRIDE); - REG_WR(bp, emac_base + EMAC_REG_EMAC_LED, reg_val); - break; - case 1: /*100MB led */ - /*Read the current value of the LED register in - the EMAC block */ - reg_val = REG_RD(bp, emac_base + EMAC_REG_EMAC_LED); - /* Set the OVERRIDE bit to 1 */ - reg_val |= EMAC_LED_OVERRIDE; - /* If value is 1, set the 100M_OVERRIDE bit, - otherwise reset it.*/ - reg_val = (value == 1) ? (reg_val | EMAC_LED_100MB_OVERRIDE) : - (reg_val & ~EMAC_LED_100MB_OVERRIDE); - REG_WR(bp, emac_base + EMAC_REG_EMAC_LED, reg_val); - break; - case 2: /* 1000MB led */ - /* Read the current value of the LED register in the - EMAC block */ - reg_val = REG_RD(bp, emac_base + EMAC_REG_EMAC_LED); - /* Set the OVERRIDE bit to 1 */ - reg_val |= EMAC_LED_OVERRIDE; - /* If value is 1, set the 1000M_OVERRIDE bit, otherwise - reset it. */ - reg_val = (value == 1) ? (reg_val | EMAC_LED_1000MB_OVERRIDE) : - (reg_val & ~EMAC_LED_1000MB_OVERRIDE); - REG_WR(bp, emac_base + EMAC_REG_EMAC_LED, reg_val); - break; - case 3: /* 2500MB led */ - /* Read the current value of the LED register in the - EMAC block*/ - reg_val = REG_RD(bp, emac_base + EMAC_REG_EMAC_LED); - /* Set the OVERRIDE bit to 1 */ - reg_val |= EMAC_LED_OVERRIDE; - /* If value is 1, set the 2500M_OVERRIDE bit, otherwise - reset it.*/ - reg_val = (value == 1) ? (reg_val | EMAC_LED_2500MB_OVERRIDE) : - (reg_val & ~EMAC_LED_2500MB_OVERRIDE); - REG_WR(bp, emac_base + EMAC_REG_EMAC_LED, reg_val); - break; - case 4: /*10G led */ - if (port == 0) { - REG_WR(bp, NIG_REG_LED_10G_P0, - value); - } else { - REG_WR(bp, NIG_REG_LED_10G_P1, - value); - } - break; - case 5: /* TRAFFIC led */ - /* Find if the traffic control is via BMAC or EMAC */ - if (port == 0) - reg_val = REG_RD(bp, NIG_REG_NIG_EMAC0_EN); - else - reg_val = REG_RD(bp, NIG_REG_NIG_EMAC1_EN); - - /* Override the traffic led in the EMAC:*/ - if (reg_val == 1) { - /* Read the current value of the LED register in - the EMAC block */ - reg_val = REG_RD(bp, emac_base + - EMAC_REG_EMAC_LED); - /* Set the TRAFFIC_OVERRIDE bit to 1 */ - reg_val |= EMAC_LED_OVERRIDE; - /* If value is 1, set the TRAFFIC bit, otherwise - reset it.*/ - reg_val = (value == 1) ? (reg_val | EMAC_LED_TRAFFIC) : - (reg_val & ~EMAC_LED_TRAFFIC); - REG_WR(bp, emac_base + EMAC_REG_EMAC_LED, reg_val); - } else { /* Override the traffic led in the BMAC: */ - REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 - + port*4, 1); - REG_WR(bp, NIG_REG_LED_CONTROL_TRAFFIC_P0 + port*4, - value); - } - break; - default: - DP(NETIF_MSG_LINK, - "bnx2x_override_led_value() unknown led index %d " - "(should be 0-5)\n", led_idx); - return -EINVAL; - } - - return 0; -} - - -u8 bnx2x_set_led(struct link_params *params, u8 mode, u32 speed) -{ - u8 port = params->port; - u16 hw_led_mode = params->hw_led_mode; - u8 rc = 0; - u32 tmp; - u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; - u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config); - struct bnx2x *bp = params->bp; - DP(NETIF_MSG_LINK, "bnx2x_set_led: port %x, mode %d\n", port, mode); - DP(NETIF_MSG_LINK, "speed 0x%x, hw_led_mode 0x%x\n", - speed, hw_led_mode); - switch (mode) { - case LED_MODE_OFF: - REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 0); - REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, - SHARED_HW_CFG_LED_MAC1); - - tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED); - EMAC_WR(bp, EMAC_REG_EMAC_LED, (tmp | EMAC_LED_OVERRIDE)); - break; - - case LED_MODE_OPER: - if (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) { - REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, 0); - REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 1); - } else { - REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, - hw_led_mode); - } - - REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 + - port*4, 0); - /* Set blinking rate to ~15.9Hz */ - REG_WR(bp, NIG_REG_LED_CONTROL_BLINK_RATE_P0 + port*4, - LED_BLINK_RATE_VAL); - REG_WR(bp, NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0 + - port*4, 1); - tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED); - EMAC_WR(bp, EMAC_REG_EMAC_LED, - (tmp & (~EMAC_LED_OVERRIDE))); - - if (CHIP_IS_E1(bp) && - ((speed == SPEED_2500) || - (speed == SPEED_1000) || - (speed == SPEED_100) || - (speed == SPEED_10))) { - /* On Everest 1 Ax chip versions for speeds less than - 10G LED scheme is different */ - REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 - + port*4, 1); - REG_WR(bp, NIG_REG_LED_CONTROL_TRAFFIC_P0 + - port*4, 0); - REG_WR(bp, NIG_REG_LED_CONTROL_BLINK_TRAFFIC_P0 + - port*4, 1); - } - break; - - default: - rc = -EINVAL; - DP(NETIF_MSG_LINK, "bnx2x_set_led: Invalid led mode %d\n", - mode); - break; - } - return rc; - -} - -u8 bnx2x_test_link(struct link_params *params, struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u16 gp_status = 0; - - CL45_RD_OVER_CL22(bp, params->port, - params->phy_addr, - MDIO_REG_BANK_GP_STATUS, - MDIO_GP_STATUS_TOP_AN_STATUS1, - &gp_status); - /* link is up only if both local phy and external phy are up */ - if ((gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS) && - bnx2x_ext_phy_is_link_up(params, vars, 1)) - return 0; - - return -ESRCH; -} - -static u8 bnx2x_link_initialize(struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u8 port = params->port; - u8 rc = 0; - u8 non_ext_phy; - u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config); - - /* Activate the external PHY */ - bnx2x_ext_phy_reset(params, vars); - - bnx2x_set_aer_mmd(params, vars); - - if (vars->phy_flags & PHY_XGXS_FLAG) - bnx2x_set_master_ln(params); - - rc = bnx2x_reset_unicore(params); - /* reset the SerDes and wait for reset bit return low */ - if (rc != 0) - return rc; - - bnx2x_set_aer_mmd(params, vars); - - /* setting the masterLn_def again after the reset */ - if (vars->phy_flags & PHY_XGXS_FLAG) { - bnx2x_set_master_ln(params); - bnx2x_set_swap_lanes(params); - } - - if (vars->phy_flags & PHY_XGXS_FLAG) { - if ((params->req_line_speed && - ((params->req_line_speed == SPEED_100) || - (params->req_line_speed == SPEED_10))) || - (!params->req_line_speed && - (params->speed_cap_mask >= - PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL) && - (params->speed_cap_mask < - PORT_HW_CFG_SPEED_CAPABILITY_D0_1G) - )) { - vars->phy_flags |= PHY_SGMII_FLAG; - } else { - vars->phy_flags &= ~PHY_SGMII_FLAG; - } - } - /* In case of external phy existance, the line speed would be the - line speed linked up by the external phy. In case it is direct only, - then the line_speed during initialization will be equal to the - req_line_speed*/ - vars->line_speed = params->req_line_speed; - - bnx2x_calc_ieee_aneg_adv(params, &vars->ieee_fc); - - /* init ext phy and enable link state int */ - non_ext_phy = ((ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) || - (params->loopback_mode == LOOPBACK_XGXS_10)); - - if (non_ext_phy || - (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) || - (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706) || - (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726) || - (params->loopback_mode == LOOPBACK_EXT_PHY)) { - if (params->req_line_speed == SPEED_AUTO_NEG) - bnx2x_set_parallel_detection(params, vars->phy_flags); - bnx2x_init_internal_phy(params, vars, non_ext_phy); - } - - if (!non_ext_phy) - rc |= bnx2x_ext_phy_init(params, vars); - - bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, - (NIG_STATUS_XGXS0_LINK10G | - NIG_STATUS_XGXS0_LINK_STATUS | - NIG_STATUS_SERDES0_LINK_STATUS)); - - return rc; - -} - - -u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u32 val; - - DP(NETIF_MSG_LINK, "Phy Initialization started\n"); - DP(NETIF_MSG_LINK, "req_speed %d, req_flowctrl %d\n", - params->req_line_speed, params->req_flow_ctrl); - vars->link_status = 0; - vars->phy_link_up = 0; - vars->link_up = 0; - vars->line_speed = 0; - vars->duplex = DUPLEX_FULL; - vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; - vars->mac_type = MAC_TYPE_NONE; - - if (params->switch_cfg == SWITCH_CFG_1G) - vars->phy_flags = PHY_SERDES_FLAG; - else - vars->phy_flags = PHY_XGXS_FLAG; - - /* disable attentions */ - bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + params->port*4, - (NIG_MASK_XGXS0_LINK_STATUS | - NIG_MASK_XGXS0_LINK10G | - NIG_MASK_SERDES0_LINK_STATUS | - NIG_MASK_MI_INT)); - - bnx2x_emac_init(params, vars); - - if (CHIP_REV_IS_FPGA(bp)) { - - vars->link_up = 1; - vars->line_speed = SPEED_10000; - vars->duplex = DUPLEX_FULL; - vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; - vars->link_status = (LINK_STATUS_LINK_UP | LINK_10GTFD); - /* enable on E1.5 FPGA */ - if (CHIP_IS_E1H(bp)) { - vars->flow_ctrl |= - (BNX2X_FLOW_CTRL_TX | - BNX2X_FLOW_CTRL_RX); - vars->link_status |= - (LINK_STATUS_TX_FLOW_CONTROL_ENABLED | - LINK_STATUS_RX_FLOW_CONTROL_ENABLED); - } - - bnx2x_emac_enable(params, vars, 0); - bnx2x_pbf_update(params, vars->flow_ctrl, vars->line_speed); - /* disable drain */ - REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0); - - /* update shared memory */ - bnx2x_update_mng(params, vars->link_status); - - return 0; - - } else - if (CHIP_REV_IS_EMUL(bp)) { - - vars->link_up = 1; - vars->line_speed = SPEED_10000; - vars->duplex = DUPLEX_FULL; - vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; - vars->link_status = (LINK_STATUS_LINK_UP | LINK_10GTFD); - - bnx2x_bmac_enable(params, vars, 0); - - bnx2x_pbf_update(params, vars->flow_ctrl, vars->line_speed); - /* Disable drain */ - REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE - + params->port*4, 0); - - /* update shared memory */ - bnx2x_update_mng(params, vars->link_status); - - return 0; - - } else - if (params->loopback_mode == LOOPBACK_BMAC) { - - vars->link_up = 1; - vars->line_speed = SPEED_10000; - vars->duplex = DUPLEX_FULL; - vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; - vars->mac_type = MAC_TYPE_BMAC; - - vars->phy_flags = PHY_XGXS_FLAG; - - bnx2x_phy_deassert(params, vars->phy_flags); - /* set bmac loopback */ - bnx2x_bmac_enable(params, vars, 1); - - REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + - params->port*4, 0); - - } else if (params->loopback_mode == LOOPBACK_EMAC) { - - vars->link_up = 1; - vars->line_speed = SPEED_1000; - vars->duplex = DUPLEX_FULL; - vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; - vars->mac_type = MAC_TYPE_EMAC; - - vars->phy_flags = PHY_XGXS_FLAG; - - bnx2x_phy_deassert(params, vars->phy_flags); - /* set bmac loopback */ - bnx2x_emac_enable(params, vars, 1); - bnx2x_emac_program(params, vars->line_speed, - vars->duplex); - REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + - params->port*4, 0); - - } else if ((params->loopback_mode == LOOPBACK_XGXS_10) || - (params->loopback_mode == LOOPBACK_EXT_PHY)) { - - vars->link_up = 1; - vars->line_speed = SPEED_10000; - vars->duplex = DUPLEX_FULL; - vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; - - vars->phy_flags = PHY_XGXS_FLAG; - - val = REG_RD(bp, - NIG_REG_XGXS0_CTRL_PHY_ADDR+ - params->port*0x18); - params->phy_addr = (u8)val; - - bnx2x_phy_deassert(params, vars->phy_flags); - bnx2x_link_initialize(params, vars); - - vars->mac_type = MAC_TYPE_BMAC; - - bnx2x_bmac_enable(params, vars, 0); - - if (params->loopback_mode == LOOPBACK_XGXS_10) { - /* set 10G XGXS loopback */ - bnx2x_set_xgxs_loopback(params, vars, 1); - } else { - /* set external phy loopback */ - bnx2x_ext_phy_loopback(params); - } - REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + - params->port*4, 0); - - bnx2x_set_led(params, LED_MODE_OPER, vars->line_speed); - } else - /* No loopback */ - { - bnx2x_phy_deassert(params, vars->phy_flags); - switch (params->switch_cfg) { - case SWITCH_CFG_1G: - vars->phy_flags |= PHY_SERDES_FLAG; - if ((params->ext_phy_config & - PORT_HW_CFG_SERDES_EXT_PHY_TYPE_MASK) == - PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482) { - vars->phy_flags |= PHY_SGMII_FLAG; - } - - val = REG_RD(bp, - NIG_REG_SERDES0_CTRL_PHY_ADDR+ - params->port*0x10); - - params->phy_addr = (u8)val; - - break; - case SWITCH_CFG_10G: - vars->phy_flags |= PHY_XGXS_FLAG; - val = REG_RD(bp, - NIG_REG_XGXS0_CTRL_PHY_ADDR+ - params->port*0x18); - params->phy_addr = (u8)val; - - break; - default: - DP(NETIF_MSG_LINK, "Invalid switch_cfg\n"); - return -EINVAL; - } - DP(NETIF_MSG_LINK, "Phy address = 0x%x\n", params->phy_addr); - - bnx2x_link_initialize(params, vars); - msleep(30); - bnx2x_link_int_enable(params); - } - return 0; -} - -static void bnx2x_8726_reset_phy(struct bnx2x *bp, u8 port, u8 ext_phy_addr) -{ - DP(NETIF_MSG_LINK, "bnx2x_8726_reset_phy port %d\n", port); - - /* Set serial boot control for external load */ - bnx2x_cl45_write(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726, ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_GEN_CTRL, 0x0001); -} - -u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars, - u8 reset_ext_phy) -{ - struct bnx2x *bp = params->bp; - u32 ext_phy_config = params->ext_phy_config; - u8 port = params->port; - u32 ext_phy_type = XGXS_EXT_PHY_TYPE(ext_phy_config); - u32 val = REG_RD(bp, params->shmem_base + - offsetof(struct shmem_region, dev_info. - port_feature_config[params->port]. - config)); - DP(NETIF_MSG_LINK, "Resetting the link of port %d\n", port); - /* disable attentions */ - vars->link_status = 0; - bnx2x_update_mng(params, vars->link_status); - bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, - (NIG_MASK_XGXS0_LINK_STATUS | - NIG_MASK_XGXS0_LINK10G | - NIG_MASK_SERDES0_LINK_STATUS | - NIG_MASK_MI_INT)); - - /* activate nig drain */ - REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1); - - /* disable nig egress interface */ - REG_WR(bp, NIG_REG_BMAC0_OUT_EN + port*4, 0); - REG_WR(bp, NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0); - - /* Stop BigMac rx */ - bnx2x_bmac_rx_disable(bp, port); - - /* disable emac */ - REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0); - - msleep(10); - /* The PHY reset is controled by GPIO 1 - * Hold it as vars low - */ - /* clear link led */ - bnx2x_set_led(params, LED_MODE_OFF, 0); - if (reset_ext_phy) { - switch (ext_phy_type) { - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT: - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072: - break; - - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727: - { - - /* Disable Transmitter */ - u8 ext_phy_addr = - XGXS_EXT_PHY_ADDR(params->ext_phy_config); - if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) == - PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER) - bnx2x_sfp_set_transmitter(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, - ext_phy_addr, 0); - break; - } - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073: - DP(NETIF_MSG_LINK, "Setting 8073 port %d into " - "low power mode\n", - port); - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, - MISC_REGISTERS_GPIO_OUTPUT_LOW, - port); - break; - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726: - { - u8 ext_phy_addr = - XGXS_EXT_PHY_ADDR(params->ext_phy_config); - /* Set soft reset */ - bnx2x_8726_reset_phy(bp, params->port, ext_phy_addr); - break; - } - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823: - { - u8 ext_phy_addr = - XGXS_EXT_PHY_ADDR(params->ext_phy_config); - bnx2x_cl45_write(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_CTRL, 0x0000); - bnx2x_cl45_write(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_CTRL, 1); - break; - } - default: - /* HW reset */ - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, - MISC_REGISTERS_GPIO_OUTPUT_LOW, - port); - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, - MISC_REGISTERS_GPIO_OUTPUT_LOW, - port); - DP(NETIF_MSG_LINK, "reset external PHY\n"); - } - } - /* reset the SerDes/XGXS */ - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR, - (0x1ff << (port*16))); - - /* reset BigMac */ - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, - (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); - - /* disable nig ingress interface */ - REG_WR(bp, NIG_REG_BMAC0_IN_EN + port*4, 0); - REG_WR(bp, NIG_REG_EMAC0_IN_EN + port*4, 0); - REG_WR(bp, NIG_REG_BMAC0_OUT_EN + port*4, 0); - REG_WR(bp, NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0); - vars->link_up = 0; - return 0; -} - -static u8 bnx2x_update_link_down(struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u8 port = params->port; - - DP(NETIF_MSG_LINK, "Port %x: Link is down\n", port); - bnx2x_set_led(params, LED_MODE_OFF, 0); - - /* indicate no mac active */ - vars->mac_type = MAC_TYPE_NONE; - - /* update shared memory */ - vars->link_status = 0; - vars->line_speed = 0; - bnx2x_update_mng(params, vars->link_status); - - /* activate nig drain */ - REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1); - - /* disable emac */ - REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0); - - msleep(10); - - /* reset BigMac */ - bnx2x_bmac_rx_disable(bp, params->port); - REG_WR(bp, GRCBASE_MISC + - MISC_REGISTERS_RESET_REG_2_CLEAR, - (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); - return 0; -} - -static u8 bnx2x_update_link_up(struct link_params *params, - struct link_vars *vars, - u8 link_10g, u32 gp_status) -{ - struct bnx2x *bp = params->bp; - u8 port = params->port; - u8 rc = 0; - - vars->link_status |= LINK_STATUS_LINK_UP; - if (link_10g) { - bnx2x_bmac_enable(params, vars, 0); - bnx2x_set_led(params, LED_MODE_OPER, SPEED_10000); - } else { - rc = bnx2x_emac_program(params, vars->line_speed, - vars->duplex); - - bnx2x_emac_enable(params, vars, 0); - - /* AN complete? */ - if (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) { - if (!(vars->phy_flags & - PHY_SGMII_FLAG)) - bnx2x_set_gmii_tx_driver(params); - } - } - - /* PBF - link up */ - rc |= bnx2x_pbf_update(params, vars->flow_ctrl, - vars->line_speed); - - /* disable drain */ - REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 0); - - /* update shared memory */ - bnx2x_update_mng(params, vars->link_status); - msleep(20); - return rc; -} -/* This function should called upon link interrupt */ -/* In case vars->link_up, driver needs to - 1. Update the pbf - 2. Disable drain - 3. Update the shared memory - 4. Indicate link up - 5. Set LEDs - Otherwise, - 1. Update shared memory - 2. Reset BigMac - 3. Report link down - 4. Unset LEDs -*/ -u8 bnx2x_link_update(struct link_params *params, struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u8 port = params->port; - u16 gp_status; - u8 link_10g; - u8 ext_phy_link_up, rc = 0; - u32 ext_phy_type; - u8 is_mi_int = 0; - - DP(NETIF_MSG_LINK, "port %x, XGXS?%x, int_status 0x%x\n", - port, (vars->phy_flags & PHY_XGXS_FLAG), - REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4)); - - is_mi_int = (u8)(REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + - port*0x18) > 0); - DP(NETIF_MSG_LINK, "int_mask 0x%x MI_INT %x, SERDES_LINK %x\n", - REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4), - is_mi_int, - REG_RD(bp, - NIG_REG_SERDES0_STATUS_LINK_STATUS + port*0x3c)); - - DP(NETIF_MSG_LINK, " 10G %x, XGXS_LINK %x\n", - REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68), - REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68)); - - /* disable emac */ - REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0); - - ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config); - - /* Check external link change only for non-direct */ - ext_phy_link_up = bnx2x_ext_phy_is_link_up(params, vars, is_mi_int); - - /* Read gp_status */ - CL45_RD_OVER_CL22(bp, port, params->phy_addr, - MDIO_REG_BANK_GP_STATUS, - MDIO_GP_STATUS_TOP_AN_STATUS1, - &gp_status); - - rc = bnx2x_link_settings_status(params, vars, gp_status, - ext_phy_link_up); - if (rc != 0) - return rc; - - /* anything 10 and over uses the bmac */ - link_10g = ((vars->line_speed == SPEED_10000) || - (vars->line_speed == SPEED_12000) || - (vars->line_speed == SPEED_12500) || - (vars->line_speed == SPEED_13000) || - (vars->line_speed == SPEED_15000) || - (vars->line_speed == SPEED_16000)); - - bnx2x_link_int_ack(params, vars, link_10g, is_mi_int); - - /* In case external phy link is up, and internal link is down - ( not initialized yet probably after link initialization, it needs - to be initialized. - Note that after link down-up as result of cable plug, - the xgxs link would probably become up again without the need to - initialize it*/ - - if ((ext_phy_type != PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT) && - (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) && - (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706) && - (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726) && - (ext_phy_link_up && !vars->phy_link_up)) - bnx2x_init_internal_phy(params, vars, 0); - - /* link is up only if both local phy and external phy are up */ - vars->link_up = (ext_phy_link_up && vars->phy_link_up); - - if (vars->link_up) - rc = bnx2x_update_link_up(params, vars, link_10g, gp_status); - else - rc = bnx2x_update_link_down(params, vars); - - return rc; -} - -static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp, u32 shmem_base) -{ - u8 ext_phy_addr[PORT_MAX]; - u16 val; - s8 port; - - /* PART1 - Reset both phys */ - for (port = PORT_MAX - 1; port >= PORT_0; port--) { - /* Extract the ext phy address for the port */ - u32 ext_phy_config = REG_RD(bp, shmem_base + - offsetof(struct shmem_region, - dev_info.port_hw_config[port].external_phy_config)); - - /* disable attentions */ - bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, - (NIG_MASK_XGXS0_LINK_STATUS | - NIG_MASK_XGXS0_LINK10G | - NIG_MASK_SERDES0_LINK_STATUS | - NIG_MASK_MI_INT)); - - ext_phy_addr[port] = XGXS_EXT_PHY_ADDR(ext_phy_config); - - /* Need to take the phy out of low power mode in order - to write to access its registers */ - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, - MISC_REGISTERS_GPIO_OUTPUT_HIGH, port); - - /* Reset the phy */ - bnx2x_cl45_write(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073, - ext_phy_addr[port], - MDIO_PMA_DEVAD, - MDIO_PMA_REG_CTRL, - 1<<15); - } - - /* Add delay of 150ms after reset */ - msleep(150); - - /* PART2 - Download firmware to both phys */ - for (port = PORT_MAX - 1; port >= PORT_0; port--) { - u16 fw_ver1; - - bnx2x_bcm8073_external_rom_boot(bp, port, - ext_phy_addr[port], shmem_base); - - bnx2x_cl45_read(bp, port, PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073, - ext_phy_addr[port], - MDIO_PMA_DEVAD, - MDIO_PMA_REG_ROM_VER1, &fw_ver1); - if (fw_ver1 == 0 || fw_ver1 == 0x4321) { - DP(NETIF_MSG_LINK, - "bnx2x_8073_common_init_phy port %x:" - "Download failed. fw version = 0x%x\n", - port, fw_ver1); - return -EINVAL; - } - - /* Only set bit 10 = 1 (Tx power down) */ - bnx2x_cl45_read(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073, - ext_phy_addr[port], - MDIO_PMA_DEVAD, - MDIO_PMA_REG_TX_POWER_DOWN, &val); - - /* Phase1 of TX_POWER_DOWN reset */ - bnx2x_cl45_write(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073, - ext_phy_addr[port], - MDIO_PMA_DEVAD, - MDIO_PMA_REG_TX_POWER_DOWN, - (val | 1<<10)); - } - - /* Toggle Transmitter: Power down and then up with 600ms - delay between */ - msleep(600); - - /* PART3 - complete TX_POWER_DOWN process, and set GPIO2 back to low */ - for (port = PORT_MAX - 1; port >= PORT_0; port--) { - /* Phase2 of POWER_DOWN_RESET */ - /* Release bit 10 (Release Tx power down) */ - bnx2x_cl45_read(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073, - ext_phy_addr[port], - MDIO_PMA_DEVAD, - MDIO_PMA_REG_TX_POWER_DOWN, &val); - - bnx2x_cl45_write(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073, - ext_phy_addr[port], - MDIO_PMA_DEVAD, - MDIO_PMA_REG_TX_POWER_DOWN, (val & (~(1<<10)))); - msleep(15); - - /* Read modify write the SPI-ROM version select register */ - bnx2x_cl45_read(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073, - ext_phy_addr[port], - MDIO_PMA_DEVAD, - MDIO_PMA_REG_EDC_FFE_MAIN, &val); - bnx2x_cl45_write(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073, - ext_phy_addr[port], - MDIO_PMA_DEVAD, - MDIO_PMA_REG_EDC_FFE_MAIN, (val | (1<<12))); - - /* set GPIO2 back to LOW */ - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, - MISC_REGISTERS_GPIO_OUTPUT_LOW, port); - } - return 0; - -} - -static u8 bnx2x_8727_common_init_phy(struct bnx2x *bp, u32 shmem_base) -{ - u8 ext_phy_addr[PORT_MAX]; - s8 port, first_port, i; - u32 swap_val, swap_override; - DP(NETIF_MSG_LINK, "Executing BCM8727 common init\n"); - swap_val = REG_RD(bp, NIG_REG_PORT_SWAP); - swap_override = REG_RD(bp, NIG_REG_STRAP_OVERRIDE); - - bnx2x_ext_phy_hw_reset(bp, 1 ^ (swap_val && swap_override)); - msleep(5); - - if (swap_val && swap_override) - first_port = PORT_0; - else - first_port = PORT_1; - - /* PART1 - Reset both phys */ - for (i = 0, port = first_port; i < PORT_MAX; i++, port = !port) { - /* Extract the ext phy address for the port */ - u32 ext_phy_config = REG_RD(bp, shmem_base + - offsetof(struct shmem_region, - dev_info.port_hw_config[port].external_phy_config)); - - /* disable attentions */ - bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, - (NIG_MASK_XGXS0_LINK_STATUS | - NIG_MASK_XGXS0_LINK10G | - NIG_MASK_SERDES0_LINK_STATUS | - NIG_MASK_MI_INT)); - - ext_phy_addr[port] = XGXS_EXT_PHY_ADDR(ext_phy_config); - - /* Reset the phy */ - bnx2x_cl45_write(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, - ext_phy_addr[port], - MDIO_PMA_DEVAD, - MDIO_PMA_REG_CTRL, - 1<<15); - } - - /* Add delay of 150ms after reset */ - msleep(150); - - /* PART2 - Download firmware to both phys */ - for (i = 0, port = first_port; i < PORT_MAX; i++, port = !port) { - u16 fw_ver1; - - bnx2x_bcm8727_external_rom_boot(bp, port, - ext_phy_addr[port], shmem_base); - - bnx2x_cl45_read(bp, port, PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, - ext_phy_addr[port], - MDIO_PMA_DEVAD, - MDIO_PMA_REG_ROM_VER1, &fw_ver1); - if (fw_ver1 == 0 || fw_ver1 == 0x4321) { - DP(NETIF_MSG_LINK, - "bnx2x_8727_common_init_phy port %x:" - "Download failed. fw version = 0x%x\n", - port, fw_ver1); - return -EINVAL; - } - } - - return 0; -} - - -static u8 bnx2x_8726_common_init_phy(struct bnx2x *bp, u32 shmem_base) -{ - u8 ext_phy_addr; - u32 val; - s8 port; - - /* Use port1 because of the static port-swap */ - /* Enable the module detection interrupt */ - val = REG_RD(bp, MISC_REG_GPIO_EVENT_EN); - val |= ((1<<MISC_REGISTERS_GPIO_3)| - (1<<(MISC_REGISTERS_GPIO_3 + MISC_REGISTERS_GPIO_PORT_SHIFT))); - REG_WR(bp, MISC_REG_GPIO_EVENT_EN, val); - - bnx2x_ext_phy_hw_reset(bp, 1); - msleep(5); - for (port = 0; port < PORT_MAX; port++) { - /* Extract the ext phy address for the port */ - u32 ext_phy_config = REG_RD(bp, shmem_base + - offsetof(struct shmem_region, - dev_info.port_hw_config[port].external_phy_config)); - - ext_phy_addr = XGXS_EXT_PHY_ADDR(ext_phy_config); - DP(NETIF_MSG_LINK, "8726_common_init : ext_phy_addr = 0x%x\n", - ext_phy_addr); - - bnx2x_8726_reset_phy(bp, port, ext_phy_addr); - - /* Set fault module detected LED on */ - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0, - MISC_REGISTERS_GPIO_HIGH, - port); - } - - return 0; -} - - -static u8 bnx2x_84823_common_init_phy(struct bnx2x *bp, u32 shmem_base) -{ - /* HW reset */ - bnx2x_ext_phy_hw_reset(bp, 1); - return 0; -} -u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base) -{ - u8 rc = 0; - u32 ext_phy_type; - - DP(NETIF_MSG_LINK, "Begin common phy init\n"); - - /* Read the ext_phy_type for arbitrary port(0) */ - ext_phy_type = XGXS_EXT_PHY_TYPE( - REG_RD(bp, shmem_base + - offsetof(struct shmem_region, - dev_info.port_hw_config[0].external_phy_config))); - - switch (ext_phy_type) { - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073: - { - rc = bnx2x_8073_common_init_phy(bp, shmem_base); - break; - } - - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727: - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727_NOC: - rc = bnx2x_8727_common_init_phy(bp, shmem_base); - break; - - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726: - /* GPIO1 affects both ports, so there's need to pull - it for single port alone */ - rc = bnx2x_8726_common_init_phy(bp, shmem_base); - break; - case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823: - rc = bnx2x_84823_common_init_phy(bp, shmem_base); - break; - default: - DP(NETIF_MSG_LINK, - "bnx2x_common_init_phy: ext_phy 0x%x not required\n", - ext_phy_type); - break; - } - - return rc; -} - -void bnx2x_sfx7101_sp_sw_reset(struct bnx2x *bp, u8 port, u8 phy_addr) -{ - u16 val, cnt; - - bnx2x_cl45_read(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101, - phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_7101_RESET, &val); - - for (cnt = 0; cnt < 10; cnt++) { - msleep(50); - /* Writes a self-clearing reset */ - bnx2x_cl45_write(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101, - phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_7101_RESET, - (val | (1<<15))); - /* Wait for clear */ - bnx2x_cl45_read(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101, - phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_7101_RESET, &val); - - if ((val & (1<<15)) == 0) - break; - } -} |