diff options
| author | Wolfgang Grandegger <wg@grandegger.com> | 2009-09-01 05:37:33 +0000 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2009-09-04 02:16:16 -0700 |
| commit | 2a6ba39ad6a277595ef9a0187a44f09e062dd3b2 (patch) | |
| tree | e4036840743f2f618df8626815edd5a9ab2cd5b2 /drivers/net/can/Kconfig | |
| parent | 8935f57e68c40c6469efe03f996bfb6150e18c6b (diff) | |
can: sja1000: legacy SJA1000 ISA bus driver
This patch adds support for legacy SJA1000 CAN controllers on the ISA
or PC-104 bus. The I/O port or memory address and the IRQ number must
be specified via module parameters:
insmod sja1000_isa.ko port=0x310,0x380 irq=7,11
for ISA devices using I/O ports or:
insmod sja1000_isa.ko mem=0xd1000,0xd1000 irq=7,11
for memory mapped ISA devices.
Indirect access via address and data port is supported as well:
insmod sja1000_isa.ko port=0x310,0x380 indirect=1 irq=7,11
Here is a full list of the supported module parameters:
port:I/O port number (array of ulong)
mem:I/O memory address (array of ulong)
indirect:Indirect access via address and data port (array of byte)
irq:IRQ number (array of int)
clk:External oscillator clock frequency (default=16000000 [16 MHz])
(array of int)
cdr:Clock divider register (default=0x48 [CDR_CBP | CDR_CLK_OFF])
(array of byte)
ocr:Output clock register (default=0x18 [OCR_TX0_PUSHPULL])
(array of byte)
Note: for clk, cdr, ocr, the first argument re-defines the default
for all other devices, e.g.:
insmod sja1000_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000
is equivalent to
insmod sja1000_isa.ko mem=0xd1000,0xd1000 irq=7,11 \
clk=24000000,24000000
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Tested-by: Oliver Hartkopp <oliver@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/can/Kconfig')
| -rw-r--r-- | drivers/net/can/Kconfig | 7 |
1 files changed, 7 insertions, 0 deletions
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig index 30ae55d7167..09007437246 100644 --- a/drivers/net/can/Kconfig +++ b/drivers/net/can/Kconfig @@ -41,6 +41,13 @@ config CAN_SJA1000 ---help--- Driver for the SJA1000 CAN controllers from Philips or NXP +config CAN_SJA1000_ISA + depends on CAN_SJA1000 && ISA + tristate "ISA Bus based legacy SJA1000 driver" + ---help--- + This driver adds legacy support for SJA1000 chips connected to + the ISA bus using I/O port, memory mapped or indirect access. + config CAN_SJA1000_PLATFORM depends on CAN_SJA1000 tristate "Generic Platform Bus based SJA1000 driver" |