diff options
| author | Jeff Garzik <jeff@garzik.org> | 2006-09-13 13:24:59 -0400 |
|---|---|---|
| committer | Jeff Garzik <jeff@garzik.org> | 2006-09-13 13:24:59 -0400 |
| commit | 6aa20a2235535605db6d6d2bd850298b2fe7f31e (patch) | |
| tree | df0b855043407b831d57f2f2c271f8aab48444f4 /drivers/net/cassini.h | |
| parent | 7a291083225af6e22ffaa46b3d91cfc1a1ccaab4 (diff) | |
drivers/net: Trim trailing whitespace
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers/net/cassini.h')
| -rw-r--r-- | drivers/net/cassini.h | 766 |
1 files changed, 383 insertions, 383 deletions
diff --git a/drivers/net/cassini.h b/drivers/net/cassini.h index ab55c7ee101..a970804487c 100644 --- a/drivers/net/cassini.h +++ b/drivers/net/cassini.h @@ -21,7 +21,7 @@ * * vendor id: 0x108E (Sun Microsystems, Inc.) * device id: 0xabba (Cassini) - * revision ids: 0x01 = Cassini + * revision ids: 0x01 = Cassini * 0x02 = Cassini rev 2 * 0x10 = Cassini+ * 0x11 = Cassini+ 0.2u @@ -46,16 +46,16 @@ * appear in cassini+. REG_MINUS_ addresses only appear in cassini. */ #define CAS_ID_REV2 0x02 -#define CAS_ID_REVPLUS 0x10 -#define CAS_ID_REVPLUS02u 0x11 +#define CAS_ID_REVPLUS 0x10 +#define CAS_ID_REVPLUS02u 0x11 #define CAS_ID_REVSATURNB2 0x30 /** global resources **/ /* this register sets the weights for the weighted round robin arbiter. e.g., * if rx weight == 1 and tx weight == 0, rx == 2x tx transfer credit - * for its next turn to access the pci bus. - * map: 0x0 = x1, 0x1 = x2, 0x2 = x4, 0x3 = x8 + * for its next turn to access the pci bus. + * map: 0x0 = x1, 0x1 = x2, 0x2 = x4, 0x3 = x8 * DEFAULT: 0x0, SIZE: 5 bits */ #define REG_CAWR 0x0004 /* core arbitration weight */ @@ -66,8 +66,8 @@ #define CAWR_RR_DIS 0x10 /* [4] */ /* if enabled, BIM can send bursts across PCI bus > cacheline size. burst - * sizes determined by length of packet or descriptor transfer and the - * max length allowed by the target. + * sizes determined by length of packet or descriptor transfer and the + * max length allowed by the target. * DEFAULT: 0x0, SIZE: 1 bit */ #define REG_INF_BURST 0x0008 /* infinite burst enable reg */ @@ -75,21 +75,21 @@ /* top level interrupts [0-9] are auto-cleared to 0 when the status * register is read. second level interrupts [13 - 18] are cleared at - * the source. tx completion register 3 is replicated in [19 - 31] + * the source. tx completion register 3 is replicated in [19 - 31] * DEFAULT: 0x00000000, SIZE: 29 bits */ #define REG_INTR_STATUS 0x000C /* interrupt status register */ -#define INTR_TX_INTME 0x00000001 /* frame w/ INT ME desc bit set +#define INTR_TX_INTME 0x00000001 /* frame w/ INT ME desc bit set xferred from host queue to TX FIFO */ #define INTR_TX_ALL 0x00000002 /* all xmit frames xferred into TX FIFO. i.e., - TX Kick == TX complete. if + TX Kick == TX complete. if PACED_MODE set, then TX FIFO also empty */ -#define INTR_TX_DONE 0x00000004 /* any frame xferred into tx +#define INTR_TX_DONE 0x00000004 /* any frame xferred into tx FIFO */ -#define INTR_TX_TAG_ERROR 0x00000008 /* TX FIFO tag framing +#define INTR_TX_TAG_ERROR 0x00000008 /* TX FIFO tag framing corrupted. FATAL ERROR */ #define INTR_RX_DONE 0x00000010 /* at least 1 frame xferred from RX FIFO to host mem. @@ -98,18 +98,18 @@ intr blanking. */ #define INTR_RX_BUF_UNAVAIL 0x00000020 /* no more receive buffers. RX Kick == RX complete */ -#define INTR_RX_TAG_ERROR 0x00000040 /* RX FIFO tag framing +#define INTR_RX_TAG_ERROR 0x00000040 /* RX FIFO tag framing corrupted. FATAL ERROR */ #define INTR_RX_COMP_FULL 0x00000080 /* no more room in completion ring to post descriptors. RX complete head incr to almost reach RX complete tail */ -#define INTR_RX_BUF_AE 0x00000100 /* less than the +#define INTR_RX_BUF_AE 0x00000100 /* less than the programmable threshold # of free descr avail for hw use */ -#define INTR_RX_COMP_AF 0x00000200 /* less than the +#define INTR_RX_COMP_AF 0x00000200 /* less than the programmable threshold # of descr spaces for hw use in completion descr @@ -119,17 +119,17 @@ from fifo during DMA or header parser provides TCP header and payload size > - MAC packet size. + MAC packet size. FATAL ERROR */ #define INTR_SUMMARY 0x00001000 /* summary interrupt bit. this - bit will be set if an interrupt + bit will be set if an interrupt generated on the pci bus. useful - when driver is polling for + when driver is polling for interrupts */ #define INTR_PCS_STATUS 0x00002000 /* PCS interrupt status register */ -#define INTR_TX_MAC_STATUS 0x00004000 /* TX MAC status register has at +#define INTR_TX_MAC_STATUS 0x00004000 /* TX MAC status register has at least 1 unmasked interrupt set */ -#define INTR_RX_MAC_STATUS 0x00008000 /* RX MAC status register has at +#define INTR_RX_MAC_STATUS 0x00008000 /* RX MAC status register has at least 1 unmasked interrupt set */ #define INTR_MAC_CTRL_STATUS 0x00010000 /* MAC control status register has at least 1 unmasked interrupt @@ -137,9 +137,9 @@ #define INTR_MIF_STATUS 0x00020000 /* MIF status register has at least 1 unmasked interrupt set */ #define INTR_PCI_ERROR_STATUS 0x00040000 /* PCI error status register in the - BIF has at least 1 unmasked + BIF has at least 1 unmasked interrupt set */ -#define INTR_TX_COMP_3_MASK 0xFFF80000 /* mask for TX completion +#define INTR_TX_COMP_3_MASK 0xFFF80000 /* mask for TX completion 3 reg data */ #define INTR_TX_COMP_3_SHIFT 19 #define INTR_ERROR_MASK (INTR_MIF_STATUS | INTR_PCI_ERROR_STATUS | \ @@ -149,7 +149,7 @@ INTR_MAC_CTRL_STATUS) /* determines which status events will cause an interrupt. layout same - * as REG_INTR_STATUS. + * as REG_INTR_STATUS. * DEFAULT: 0xFFFFFFFF, SIZE: 16 bits */ #define REG_INTR_MASK 0x0010 /* Interrupt mask */ @@ -158,18 +158,18 @@ * useful when driver is polling for interrupts. layout same as REG_INTR_MASK. * DEFAULT: 0x00000000, SIZE: 12 bits */ -#define REG_ALIAS_CLEAR 0x0014 /* alias clear mask +#define REG_ALIAS_CLEAR 0x0014 /* alias clear mask (used w/ status alias) */ /* same as REG_INTR_STATUS except that only bits cleared are those selected by - * REG_ALIAS_CLEAR + * REG_ALIAS_CLEAR * DEFAULT: 0x00000000, SIZE: 29 bits */ -#define REG_INTR_STATUS_ALIAS 0x001C /* interrupt status alias +#define REG_INTR_STATUS_ALIAS 0x001C /* interrupt status alias (selective clear) */ /* DEFAULT: 0x0, SIZE: 3 bits */ #define REG_PCI_ERR_STATUS 0x1000 /* PCI error status */ -#define PCI_ERR_BADACK 0x01 /* reserved in Cassini+. +#define PCI_ERR_BADACK 0x01 /* reserved in Cassini+. set if no ACK64# during ABS64 cycle in Cassini. */ #define PCI_ERR_DTRTO 0x02 /* delayed xaction timeout. set if @@ -179,16 +179,16 @@ unused in Cassini. */ #define PCI_ERR_BIM_DMA_READ 0x10 /* BIM received 0 count DMA read req. unused in Cassini. */ -#define PCI_ERR_BIM_DMA_TIMEOUT 0x20 /* BIM received 255 retries during +#define PCI_ERR_BIM_DMA_TIMEOUT 0x20 /* BIM received 255 retries during DMA. unused in cassini. */ /* mask for PCI status events that will set PCI_ERR_STATUS. if cleared, event - * causes an interrupt to be generated. + * causes an interrupt to be generated. * DEFAULT: 0x7, SIZE: 3 bits */ #define REG_PCI_ERR_STATUS_MASK 0x1004 /* PCI Error status mask */ -/* used to configure PCI related parameters that are not in PCI config space. +/* used to configure PCI related parameters that are not in PCI config space. * DEFAULT: 0bxx000, SIZE: 5 bits */ #define REG_BIM_CFG 0x1008 /* BIM Configuration */ @@ -201,7 +201,7 @@ #define BIM_CFG_RMA_INTR_ENABLE 0x040 /* master abort intr enable */ #define BIM_CFG_RTA_INTR_ENABLE 0x080 /* target abort intr enable */ #define BIM_CFG_RESERVED2 0x100 /* reserved */ -#define BIM_CFG_BIM_DISABLE 0x200 /* stop BIM DMA. use before global +#define BIM_CFG_BIM_DISABLE 0x200 /* stop BIM DMA. use before global reset. reserved in Cassini. */ #define BIM_CFG_BIM_STATUS 0x400 /* (ro) 1 = BIM DMA suspended. reserved in Cassini. */ @@ -212,7 +212,7 @@ #define REG_BIM_DIAG 0x100C /* BIM Diagnostic */ #define BIM_DIAG_MSTR_SM_MASK 0x3FFFFF00 /* PCI master controller state machine bits [21:0] */ -#define BIM_DIAG_BRST_SM_MASK 0x7F /* PCI burst controller state +#define BIM_DIAG_BRST_SM_MASK 0x7F /* PCI burst controller state machine bits [6:0] */ /* writing to SW_RESET_TX and SW_RESET_RX will issue a global @@ -224,14 +224,14 @@ #define SW_RESET_RX 0x00000002 /* reset RX DMA engine. poll until cleared to 0. */ #define SW_RESET_RSTOUT 0x00000004 /* force RSTOUT# pin active (low). - resets PHY and anything else + resets PHY and anything else connected to RSTOUT#. RSTOUT# is also activated by local PCI - reset when hot-swap is being + reset when hot-swap is being done. */ -#define SW_RESET_BLOCK_PCS_SLINK 0x00000008 /* if a global reset is done with - this bit set, PCS and SLINK - modules won't be reset. +#define SW_RESET_BLOCK_PCS_SLINK 0x00000008 /* if a global reset is done with + this bit set, PCS and SLINK + modules won't be reset. i.e., link won't drop. */ #define SW_RESET_BREQ_SM_MASK 0x00007F00 /* breq state machine [6:0] */ #define SW_RESET_PCIARB_SM_MASK 0x00070000 /* pci arbitration state bits: @@ -252,7 +252,7 @@ 0b01: AD_ACK_RX 0b10: AD_ACK_TX 0b11: AD_IDL_TX */ -#define SW_RESET_WRPCI_SM_MASK 0x06000000 /* write pci state bits +#define SW_RESET_WRPCI_SM_MASK 0x06000000 /* write pci state bits 0b00: WR_PCI_WAT 0b01: WR_PCI_RDY 0b11: WR_PCI_ACK */ @@ -268,7 +268,7 @@ * value written has both lower and upper 32-bit halves rotated to the right * one bit position. e.g., FFFFFFFF FFFFFFFF -> 7FFFFFFF 7FFFFFFF */ -#define REG_MINUS_BIM_DATAPATH_TEST 0x1018 /* Cassini: BIM datapath test +#define REG_MINUS_BIM_DATAPATH_TEST 0x1018 /* Cassini: BIM datapath test Cassini+: reserved */ /* output enables are provided for each device's chip select and for the rest @@ -276,12 +276,12 @@ * bits are connected to general purpus control/status bits. * DEFAULT: 0x7 */ -#define REG_BIM_LOCAL_DEV_EN 0x1020 /* BIM local device +#define REG_BIM_LOCAL_DEV_EN 0x1020 /* BIM local device output EN. default: 0x7 */ #define BIM_LOCAL_DEV_PAD 0x01 /* address bus, RW signal, and OE signal output enable on the local bus interface. these - are shared between both local + are shared between both local bus devices. tristate when 0. */ #define BIM_LOCAL_DEV_PROM 0x02 /* PROM chip select */ #define BIM_LOCAL_DEV_EXT 0x04 /* secondary local bus device chip @@ -291,8 +291,8 @@ #define BIM_LOCAL_DEV_HW_RESET 0x20 /* internal hw reset. Cassini+ only. */ /* access 24 entry BIM read and write buffers. put address in REG_BIM_BUFFER_ADDR - * and read/write from/to it REG_BIM_BUFFER_DATA_LOW and _DATA_HI. - * _DATA_HI should be the last access of the sequence. + * and read/write from/to it REG_BIM_BUFFER_DATA_LOW and _DATA_HI. + * _DATA_HI should be the last access of the sequence. * DEFAULT: undefined */ #define REG_BIM_BUFFER_ADDR 0x1024 /* BIM buffer address. for @@ -304,10 +304,10 @@ #define REG_BIM_BUFFER_DATA_LOW 0x1028 /* BIM buffer data low */ #define REG_BIM_BUFFER_DATA_HI 0x102C /* BIM buffer data high */ -/* set BIM_RAM_BIST_START to start built-in self test for BIM read buffer. +/* set BIM_RAM_BIST_START to start built-in self test for BIM read buffer. * bit auto-clears when done with status read from _SUMMARY and _PASS bits. */ -#define REG_BIM_RAM_BIST 0x102C /* BIM RAM (read buffer) BIST +#define REG_BIM_RAM_BIST 0x102C /* BIM RAM (read buffer) BIST control/status */ #define BIM_RAM_BIST_RD_START 0x01 /* start BIST for BIM read buffer */ #define BIM_RAM_BIST_WR_START 0x02 /* start BIST for BIM write buffer. @@ -321,7 +321,7 @@ #define BIM_RAM_BIST_RD_LOW_PASS 0x10 /* read low bank passes BIST */ #define BIM_RAM_BIST_RD_HI_PASS 0x20 /* read high bank passes BIST */ #define BIM_RAM_BIST_WR_LOW_PASS 0x40 /* write low bank passes BIST. - Cassini only. reserved in + Cassini only. reserved in Cassini+. */ #define BIM_RAM_BIST_WR_HI_PASS 0x80 /* write high bank passes BIST. Cassini only. reserved in @@ -333,7 +333,7 @@ #define REG_BIM_DIAG_MUX 0x1030 /* BIM diagnostic probe mux select register */ -/* enable probe monitoring mode and select data appearing on the P_A* bus. bit +/* enable probe monitoring mode and select data appearing on the P_A* bus. bit * values for _SEL_HI_MASK and _SEL_LOW_MASK: * 0x0: internal probe[7:0] (pci arb state, wtc empty w, wtc full w, wtc empty w, * wtc empty r, post pci) @@ -353,7 +353,7 @@ * 0xe: hp probe[7:0] 0xf: mac probe[7:0] */ #define REG_PLUS_PROBE_MUX_SELECT 0x1034 /* Cassini+: PROBE MUX SELECT */ -#define PROBE_MUX_EN 0x80000000 /* allow probe signals to be +#define PROBE_MUX_EN 0x80000000 /* allow probe signals to be driven on local bus P_A[15:0] for debugging */ #define PROBE_MUX_SUB_MUX_MASK 0x0000FF00 /* select sub module probe signals: @@ -362,28 +362,28 @@ 0x30 = tx[1:0] 0xC0 = hp[1:0] */ #define PROBE_MUX_SEL_HI_MASK 0x000000F0 /* select which module to appear - on P_A[15:8]. see above for + on P_A[15:8]. see above for values. */ #define PROBE_MUX_SEL_LOW_MASK 0x0000000F /* select which module to appear - on P_A[7:0]. see above for + on P_A[7:0]. see above for values. */ -/* values mean the same thing as REG_INTR_MASK excep that it's for INTB. +/* values mean the same thing as REG_INTR_MASK excep that it's for INTB. DEFAULT: 0x1F */ #define REG_PLUS_INTR_MASK_1 0x1038 /* Cassini+: interrupt mask register 2 for INTB */ #define REG_PLUS_INTRN_MASK(x) (REG_PLUS_INTR_MASK_1 + ((x) - 1)*16) -/* bits correspond to both _MASK and _STATUS registers. _ALT corresponds to - * all of the alternate (2-4) INTR registers while _1 corresponds to only - * _MASK_1 and _STATUS_1 registers. +/* bits correspond to both _MASK and _STATUS registers. _ALT corresponds to + * all of the alternate (2-4) INTR registers while _1 corresponds to only + * _MASK_1 and _STATUS_1 registers. * DEFAULT: 0x7 for MASK registers, 0x0 for ALIAS_CLEAR registers */ -#define INTR_RX_DONE_ALT 0x01 +#define INTR_RX_DONE_ALT 0x01 #define INTR_RX_COMP_FULL_ALT 0x02 #define INTR_RX_COMP_AF_ALT 0x04 #define INTR_RX_BUF_UNAVAIL_1 0x08 #define INTR_RX_BUF_AE_1 0x10 /* almost empty */ -#define INTRN_MASK_RX_EN 0x80 +#define INTRN_MASK_RX_EN 0x80 #define INTRN_MASK_CLEAR_ALL (INTR_RX_DONE_ALT | \ INTR_RX_COMP_FULL_ALT | \ INTR_RX_COMP_AF_ALT | \ @@ -399,7 +399,7 @@ register 2 for INTB */ #define REG_PLUS_ALIASN_CLEAR(x) (REG_PLUS_ALIAS_CLEAR_1 + ((x) - 1)*16) -#define REG_PLUS_INTR_STATUS_ALIAS_1 0x1044 /* Cassini+: interrupt status +#define REG_PLUS_INTR_STATUS_ALIAS_1 0x1044 /* Cassini+: interrupt status register alias 2 for INTB */ #define REG_PLUS_INTRN_STATUS_ALIAS(x) (REG_PLUS_INTR_STATUS_ALIAS_1 + ((x) - 1)*16) @@ -411,18 +411,18 @@ #define SATURN_PCFG_CLA 0x00000004 /* 1 = phy link100led */ #define SATURN_PCFG_LLA 0x00000008 /* 1 = phy link1000led */ #define SATURN_PCFG_RLA 0x00000010 /* 1 = phy duplexled */ -#define SATURN_PCFG_PDS 0x00000020 /* phy debug mode. +#define SATURN_PCFG_PDS 0x00000020 /* phy debug mode. 0 = normal */ -#define SATURN_PCFG_MTP 0x00000080 /* test point select */ -#define SATURN_PCFG_GMO 0x00000100 /* GMII observe. 1 = +#define SATURN_PCFG_MTP 0x00000080 /* test point select */ +#define SATURN_PCFG_GMO 0x00000100 /* GMII observe. 1 = GMII on SERDES pins for monitoring. */ #define SATURN_PCFG_FSI 0x00000200 /* 1 = freeze serdes/gmii. all pins configed as outputs. for power saving when using internal phy. */ -#define SATURN_PCFG_LAD 0x00000800 /* 0 = mac core led ctrl - polarity from strapping +#define SATURN_PCFG_LAD 0x00000800 /* 0 = mac core led ctrl + polarity from strapping value. 1 = mac core led ctrl polarity active low. */ @@ -433,26 +433,26 @@ #define MAX_TX_RINGS (1 << MAX_TX_RINGS_SHIFT) #define MAX_TX_RINGS_MASK (MAX_TX_RINGS - 1) -/* TX configuration. - * descr ring sizes size = 32 * (1 << n), n < 9. e.g., 0x8 = 8k. default: 0x8 +/* TX configuration. + * descr ring sizes size = 32 * (1 << n), n < 9. e.g., 0x8 = 8k. default: 0x8 * DEFAULT: 0x3F000001 */ #define REG_TX_CFG 0x2004 /* TX config */ #define TX_CFG_DMA_EN 0x00000001 /* enable TX DMA. if cleared, DMA will stop after xfer of current buffer has been completed. */ -#define TX_CFG_FIFO_PIO_SEL 0x00000002 /* TX DMA FIFO can be - accessed w/ FIFO addr - and data registers. - TX DMA should be +#define TX_CFG_FIFO_PIO_SEL 0x00000002 /* TX DMA FIFO can be + accessed w/ FIFO addr + and data registers. + TX DMA should be disabled. */ #define TX_CFG_DESC_RING0_MASK 0x0000003C /* # desc entries in ring 1. */ #define TX_CFG_DESC_RING0_SHIFT 2 #define TX_CFG_DESC_RINGN_MASK(a) (TX_CFG_DESC_RING0_MASK << (a)*4) #define TX_CFG_DESC_RINGN_SHIFT(a) (TX_CFG_DESC_RING0_SHIFT + (a)*4) -#define TX_CFG_PACED_MODE 0x00100000 /* TX_ALL only set after - TX FIFO becomes empty. +#define TX_CFG_PACED_MODE 0x00100000 /* TX_ALL only set after + TX FIFO becomes empty. if 0, TX_ALL set if descr queue empty. */ #define TX_CFG_DMA_RDPIPE_DIS 0x01000000 /* always set to 1 */ @@ -470,26 +470,26 @@ through Q4 */ #define TX_CFG_INTR_COMPWB_DIS 0x20000000 /* disable pre-interrupt completion writeback */ -#define TX_CFG_CTX_SEL_MASK 0xC0000000 /* selects tx test port +#define TX_CFG_CTX_SEL_MASK 0xC0000000 /* selects tx test port connection - 0b00: tx mac req, + 0b00: tx mac req, tx mac retry req, tx ack and tx tag. - 0b01: txdma rd req, + 0b01: txdma rd req, txdma rd ack, txdma rd rdy, txdma rd type0 - 0b11: txdma wr req, + 0b11: txdma wr req, txdma wr ack, txdma wr rdy, txdma wr xfr done. */ #define TX_CFG_CTX_SEL_SHIFT 30 - + /* 11-bit counters that point to next location in FIFO to be loaded/retrieved. * used for diagnostics only. */ #define REG_TX_FIFO_WRITE_PTR 0x2014 /* TX FIFO write pointer */ -#define REG_TX_FIFO_SHADOW_WRITE_PTR 0x2018 /* TX FIFO shadow write +#define REG_TX_FIFO_SHADOW_WRITE_PTR 0x2018 /* TX FIFO shadow write pointer. temp hold reg. diagnostics only. */ #define REG_TX_FIFO_READ_PTR 0x201C /* TX FIFO read pointer */ @@ -509,7 +509,7 @@ #define TX_SM_1_CACHE_MASK 0x03C00000 /* desc. prefetch cache controller state machine */ #define TX_SM_1_CBQ_ARB_MASK 0xF8000000 /* CBQ arbiter state machine */ - + #define REG_TX_SM_2 0x202C /* TX state machine reg #2 */ #define TX_SM_2_COMP_WB_MASK 0x07 /* completion writeback sm */ #define TX_SM_2_SUB_LOAD_MASK 0x38 /* sub load state machine */ @@ -521,9 +521,9 @@ #define REG_TX_DATA_PTR_LOW 0x2030 /* TX data pointer low */ #define REG_TX_DATA_PTR_HI 0x2034 /* TX data pointer high */ -/* 13 bit registers written by driver w/ descriptor value that follows +/* 13 bit registers written by driver w/ descriptor value that follows * last valid xmit descriptor. kick # and complete # values are used by - * the xmit dma engine to control tx descr fetching. if > 1 valid + * the xmit dma engine to control tx descr fetching. if > 1 valid * tx descr is available within the cache line being read, cassini will * internally cache up to 4 of them. 0 on reset. _KICK = rw, _COMP = ro. */ @@ -532,12 +532,12 @@ #define REG_TX_COMP0 0x2048 /* TX completion reg #1 */ #define REG_TX_COMPN(x) (REG_TX_COMP0 + (x)*4) -/* values of TX_COMPLETE_1-4 are written. each completion register - * is 2bytes in size and contiguous. 8B allocation w/ 8B alignment. +/* values of TX_COMPLETE_1-4 are written. each completion register + * is 2bytes in size and contiguous. 8B allocation w/ 8B alignment. * NOTE: completion reg values are only written back prior to TX_INTME and - * TX_ALL interrupts. at all other times, the most up-to-date index values - * should be obtained from the REG_TX_COMPLETE_# registers. - * here's the layout: + * TX_ALL interrupts. at all other times, the most up-to-date index values + * should be obtained from the REG_TX_COMPLETE_# registers. + * here's the layout: * offset from base addr completion # byte * 0 TX_COMPLETE_1_MSB * 1 TX_COMPLETE_1_LSB @@ -558,7 +558,7 @@ #define TX_COMPWB_LSB_MASK 0x000000000000FF00ULL #define TX_COMPWB_LSB_SHIFT 8 #define TX_COMPWB_NEXT(x) ((x) >> 16) - + /* 53 MSB used as base address. 11 LSB assumed to be 0. TX desc pointer must * be 2KB-aligned. */ #define REG_TX_DB0_LOW 0x2060 /* TX descriptor base low #1 */ @@ -594,11 +594,11 @@ #define REG_TX_FIFO_DATA_HI_T0 0x2114 /* TX FIFO data high t0 */ #define REG_TX_FIFO_SIZE 0x2118 /* (ro) TX FIFO size = 0x090 = 9KB */ -/* 9-bit register controls BIST of TX FIFO. bit set indicates that the BIST +/* 9-bit register controls BIST of TX FIFO. bit set indicates that the BIST * passed for the specified memory */ #define REG_TX_RAMBIST 0x211C /* TX RAMBIST control/status */ -#define TX_RAMBIST_STATE 0x01C0 /* progress state of RAMBIST +#define TX_RAMBIST_STATE 0x01C0 /* progress state of RAMBIST controller state machine */ #define TX_RAMBIST_RAM33A_PASS 0x0020 /* RAM33A passed */ #define TX_RAMBIST_RAM32A_PASS 0x0010 /* RAM32A passed */ @@ -612,33 +612,33 @@ #define MAX_RX_DESC_RINGS 2 #define MAX_RX_COMP_RINGS 4 -/* receive DMA channel configuration. default: 0x80910 +/* receive DMA channel configuration. default: 0x80910 * free ring size = (1 << n)*32 -> [32 - 8k] - * completion ring size = (1 << n)*128 -> [128 - 32k], n < 9 + * completion ring size = (1 << n)*128 -> [128 - 32k], n < 9 * DEFAULT: 0x80910 */ #define REG_RX_CFG 0x4000 /* RX config */ #define RX_CFG_DMA_EN 0x00000001 /* enable RX DMA. 0 stops channel as soon as current frame xfer has completed. - driver should disable MAC - for 200ms before disabling + driver should disable MAC + for 200ms before disabling RX */ -#define RX_CFG_DESC_RING_MASK 0x0000001E /* # desc entries in RX - free desc ring. +#define RX_CFG_DESC_RING_MASK 0x0000001E /* # desc entries in RX + free desc ring. def: 0x8 = 8k */ #define RX_CFG_DESC_RING_SHIFT 1 #define RX_CFG_COMP_RING_MASK 0x000001E0 /* # desc entries in RX complete ring. def: 0x8 = 32k */ #define RX_CFG_COMP_RING_SHIFT 5 -#define RX_CFG_BATCH_DIS 0x00000200 /* disable receive desc +#define RX_CFG_BATCH_DIS 0x00000200 /* disable receive desc batching. def: 0x0 = enabled */ -#define RX_CFG_SWIVEL_MASK 0x00001C00 /* byte offset of the 1st - data byte of the packet +#define RX_CFG_SWIVEL_MASK 0x00001C00 /* byte offset of the 1st + data byte of the packet w/in 8 byte boundares. - this swivels the data - DMA'ed to header + this swivels the data + DMA'ed to header buffers, jumbo buffers when header split is not requested and MTU sized @@ -647,17 +647,17 @@ /* cassini+ only */ #define RX_CFG_DESC_RING1_MASK 0x000F0000 /* # of desc entries in - RX free desc ring 2. + RX free desc ring 2. def: 0x8 = 8k */ #define RX_CFG_DESC_RING1_SHIFT 16 -/* the page size register allows cassini chips to do the following with +/* the page size register allows cassini chips to do the following with * received data: * [--------------------------------------------------------------] page * [off][buf1][pad][off][buf2][pad][off][buf3][pad][off][buf4][pad] * |--------------| = PAGE_SIZE_BUFFER_STRIDE - * page = PAGE_SIZE + * page = PAGE_SIZE * offset = PAGE_SIZE_MTU_OFF * for the above example, MTU_BUFFER_COUNT = 4. * NOTE: as is apparent, you need to ensure that the following holds: @@ -667,20 +667,20 @@ #define REG_RX_PAGE_SIZE 0x4004 /* RX page size */ #define RX_PAGE_SIZE_MASK 0x00000003 /* size of pages pointed to by receive descriptors. - if jumbo buffers are - supported the page size + if jumbo buffers are + supported the page size should not be < 8k. 0b00 = 2k, 0b01 = 4k 0b10 = 8k, 0b11 = 16k DEFAULT: 8k */ #define RX_PAGE_SIZE_SHIFT 0 #define RX_PAGE_SIZE_MTU_COUNT_MASK 0x00007800 /* # of MTU buffers the hw - packs into a page. + packs into a page. DEFAULT: 4 */ #define RX_PAGE_SIZE_MTU_COUNT_SHIFT 11 #define RX_PAGE_SIZE_MTU_STRIDE_MASK 0x18000000 /* # of bytes that separate - each MTU buffer + - offset from each + each MTU buffer + + offset from each other. 0b00 = 1k, 0b01 = 2k 0b10 = 4k, 0b11 = 8k @@ -688,24 +688,24 @@ #define RX_PAGE_SIZE_MTU_STRIDE_SHIFT 27 #define RX_PAGE_SIZE_MTU_OFF_MASK 0xC0000000 /* offset in each page that hw writes the MTU buffer - into. - 0b00 = 0, + into. + 0b00 = 0, 0b01 = 64 bytes 0b10 = 96, 0b11 = 128 DEFAULT: 0x1 */ #define RX_PAGE_SIZE_MTU_OFF_SHIFT 30 - -/* 11-bit counter points to next location in RX FIFO to be loaded/read. + +/* 11-bit counter points to next location in RX FIFO to be loaded/read. * shadow write pointers enable retries in case of early receive aborts. * DEFAULT: 0x0. generated on 64-bit boundaries. */ #define REG_RX_FIFO_WRITE_PTR 0x4008 /* RX FIFO write pointer */ #define REG_RX_FIFO_READ_PTR 0x400C /* RX FIFO read pointer */ -#define REG_RX_IPP_FIFO_SHADOW_WRITE_PTR 0x4010 /* RX IPP FIFO shadow write +#define REG_RX_IPP_FIFO_SHADOW_WRITE_PTR 0x4010 /* RX IPP FIFO shadow write pointer */ #define REG_RX_IPP_FIFO_SHADOW_READ_PTR 0x4014 /* RX IPP FIFO shadow read pointer */ -#define REG_RX_IPP_FIFO_READ_PTR 0x400C /* RX IPP FIFO read +#define REG_RX_IPP_FIFO_READ_PTR 0x400C /* RX IPP FIFO read pointer. (8-bit counter) */ /* current state of RX DMA state engines + other info @@ -738,7 +738,7 @@ 0x2 = wait xon 0x3 = wait xon ack */ #define RX_DEBUG_DATA_STATE_MASK 0x000001E00 /* unload data state machine - states: + states: 0x0 = idle data 0x1 = header begin 0x2 = xfer header @@ -747,7 +747,7 @@ 0x5 = xfer mtu 0x6 = xfer mtu ld 0x7 = jumbo begin - 0x8 = xfer jumbo + 0x8 = xfer jumbo 0x9 = xfer jumbo ld 0xa = reas begin 0xb = xfer reas @@ -776,15 +776,15 @@ * XOFF PAUSE uses pause time value pre-programmed in the Send PAUSE MAC reg * XON PAUSE uses a pause time of 0. granularity of threshold is 64bytes. * PAUSE thresholds defined in terms of FIFO occupancy and may be translated - * into FIFO vacancy using RX_FIFO_SIZE. setting ON will trigger XON frames + * into FIFO vacancy using RX_FIFO_SIZE. setting ON will trigger XON frames * when FIFO reaches 0. OFF threshold should not be > size of RX FIFO. max - * value is is 0x6F. + * value is is 0x6F. * DEFAULT: 0x00078 */ #define REG_RX_PAUSE_THRESH 0x4020 /* RX pause thresholds */ #define RX_PAUSE_THRESH_QUANTUM 64 #define RX_PAUSE_THRESH_OFF_MASK 0x000001FF /* XOFF PAUSE emitted when - RX FIFO occupancy > + RX FIFO occupancy > value*64B */ #define RX_PAUSE_THRESH_OFF_SHIFT 0 #define RX_PAUSE_THRESH_ON_MASK 0x001FF000 /* XON PAUSE emitted after @@ -797,9 +797,9 @@ #define RX_PAUSE_THRESH_ON_SHIFT 12 /* 13-bit register used to control RX desc fetching and intr generation. if 4+ - * valid RX descriptors are available, Cassini will read 4 at a time. + * valid RX descriptors are available, Cassini will read 4 at a time. * writing N means that all desc up to *but* excluding N are available. N must - * be a multiple of 4 (N % 4 = 0). first desc should be cache-line aligned. + * be a multiple of 4 (N % 4 = 0). first desc should be cache-line aligned. * DEFAULT: 0 on reset */ #define REG_RX_KICK 0x4024 /* RX kick reg */ @@ -807,16 +807,16 @@ /* 8KB aligned 64-bit pointer to the base of the RX free/completion rings. * lower 13 bits of the low register are hard-wired to 0. */ -#define REG_RX_DB_LOW 0x4028 /* RX descriptor ring +#define REG_RX_DB_LOW 0x4028 /* RX descriptor ring base low */ #define REG_RX_DB_HI 0x402C /* RX descriptor ring base hi */ #define REG_RX_CB_LOW 0x4030 /* RX completion ring base low */ -#define REG_RX_CB_HI 0x4034 /* RX completion ring +#define REG_RX_CB_HI 0x4034 /* RX completion ring base hi */ /* 13-bit register indicate desc used by cassini for receive frames. used - * for diagnostic purposes. + * for diagnostic purposes. * DEFAULT: 0 on reset */ #define REG_RX_COMP 0x4038 /* (ro) RX completion */ @@ -837,9 +837,9 @@ /* values used for receive interrupt blanking. loaded each time the ISR is read * DEFAULT: 0x00000000 */ -#define REG_RX_BLANK 0x4044 /* RX blanking register +#define REG_RX_BLANK 0x4044 /* RX blanking register for ISR read */ -#define RX_BLANK_INTR_PKT_MASK 0x000001FF /* RX_DONE intr asserted if +#define RX_BLANK_INTR_PKT_MASK 0x000001FF /* RX_DONE intr asserted if this many sets of completion writebacks (up to 2 packets) occur since the last time @@ -849,33 +849,33 @@ #define RX_BLANK_INTR_TIME_MASK 0x3FFFF000 /* RX_DONE interrupt asserted if that many clocks were counted since last time the - ISR was read. + ISR was read. each count is 512 core clocks (125MHz). 0 = no time blanking */ #define RX_BLANK_INTR_TIME_SHIFT 12 -/* values used for interrupt generation based on threshold values of how +/* values used for interrupt generation based on threshold values of how * many free desc and completion entries are available for hw use. * DEFAULT: 0x00000000 */ -#define REG_RX_AE_THRESH 0x4048 /* RX almost empty +#define REG_RX_AE_THRESH 0x4048 /* RX almost empty thresholds */ -#define RX_AE_THRESH_FREE_MASK 0x00001FFF /* RX_BUF_AE will be +#define RX_AE_THRESH_FREE_MASK 0x00001FFF /* RX_BUF_AE will be generated if # desc - avail for hw use <= + avail for hw use <= # */ #define RX_AE_THRESH_FREE_SHIFT 0 #define RX_AE_THRESH_COMP_MASK 0x0FFFE000 /* RX_COMP_AE will be - generated if # of + generated if # of completion entries - avail for hw use <= + avail for hw use <= # */ #define RX_AE_THRESH_COMP_SHIFT 13 -/* probabilities for random early drop (RED) thresholds on a FIFO threshold - * basis. probability should increase when the FIFO level increases. control - * packets are never dropped and not counted in stats. probability programmed +/* probabilities for random early drop (RED) thresholds on a FIFO threshold + * basis. probability should increase when the FIFO level increases. control + * packets are never dropped and not counted in stats. probability programmed * on a 12.5% granularity. e.g., 0x1 = 1/8 packets dropped. * DEFAULT: 0x00000000 */ @@ -885,8 +885,8 @@ #define RX_RED_8K_10K_FIFO_MASK 0x00FF0000 /* 8KB < FIFO thresh < 10KB */ #define RX_RED_10K_12K_FIFO_MASK 0xFF000000 /* 10KB < FIFO thresh < 12KB */ -/* FIFO fullness levels for RX FIFO, RX control FIFO, and RX IPP FIFO. - * RX control FIFO = # of packets in RX FIFO. +/* FIFO fullness levels for RX FIFO, RX control FIFO, and RX IPP FIFO. + * RX control FIFO = # of packets in RX FIFO. * DEFAULT: 0x0 */ #define REG_RX_FIFO_FULLNESS 0x4050 /* (ro) RX FIFO fullness */ @@ -895,12 +895,12 @@ #define RX_FIFO_FULLNESS_RX_PKT_MASK 0x000000FF /* # packets in RX FIFO */ #define REG_RX_IPP_PACKET_COUNT 0x4054 /* RX IPP packet counter */ #define REG_RX_WORK_DMA_PTR_LOW 0x4058 /* RX working DMA ptr low */ -#define REG_RX_WORK_DMA_PTR_HI 0x405C /* RX working DMA ptr +#define REG_RX_WORK_DMA_PTR_HI 0x405C /* RX working DMA ptr high */ /* BIST testing ro RX FIFO, RX control FIFO, and RX IPP FIFO. only RX BIST * START/COMPLETE is writeable. START will clear when the BIST has completed - * checking all 17 RAMS. + * checking all 17 RAMS. * DEFAULT: 0bxxxx xxxxx xxxx xxxx xxxx x000 0000 0000 00x0 */ #define REG_RX_BIST 0x4060 /* (ro) RX BIST */ @@ -923,41 +923,41 @@ #define RX_BIST_REAS_27_PASS 0x00080000 /* RX Reas 27 passed */ #define RX_BIST_STATE_MASK 0x00078000 /* BIST state machine */ #define RX_BIST_SUMMARY 0x00000002 /* when BIST complete, - summary pass bit + summary pass bit contains AND of BIST results of all 16 RAMS */ -#define RX_BIST_START 0x00000001 /* write 1 to start +#define RX_BIST_START 0x00000001 /* write 1 to start BIST. self clears on completion. */ /* next location in RX CTRL FIFO that will be loaded w/ data from RX IPP/read - * from to retrieve packet control info. + * from to retrieve packet control info. * DEFAULT: 0 */ -#define REG_RX_CTRL_FIFO_WRITE_PTR 0x4064 /* (ro) RX control FIFO +#define REG_RX_CTRL_FIFO_WRITE_PTR 0x4064 /* (ro) RX control FIFO write ptr */ #define REG_RX_CTRL_FIFO_READ_PTR 0x4068 /* (ro) RX control FIFO read ptr */ /* receive interrupt blanking. loaded each time interrupt alias register is - * read. + * read. * DEFAULT: 0x0 */ #define REG_RX_BLANK_ALIAS_READ 0x406C /* RX blanking register for alias read */ -#define RX_BAR_INTR_PACKET_MASK 0x000001FF /* assert RX_DONE if # - completion writebacks - > # since last ISR - read. 0 = no - blanking. up to 2 - packets per +#define RX_BAR_INTR_PACKET_MASK 0x000001FF /* assert RX_DONE if # + completion writebacks + > # since last ISR + read. 0 = no + blanking. up to 2 + packets per completion wb. */ #define RX_BAR_INTR_TIME_MASK 0x3FFFF000 /* assert RX_DONE if # clocks > # since last ISR read. each count is 512 core clocks - (125MHz). 0 = no + (125MHz). 0 = no blanking. */ /* diagnostic access to RX FIFO. 32 LSB accessed via DATA_LOW. 32 MSB accessed @@ -981,13 +981,13 @@ * should be last write access of the write sequence. * DEFAULT: undefined */ -#define REG_RX_CTRL_FIFO_ADDR 0x4094 /* RX Control FIFO and +#define REG_RX_CTRL_FIFO_ADDR 0x4094 /* RX Control FIFO and Batching FIFO addr */ -#define REG_RX_CTRL_FIFO_DATA_LOW 0x4098 /* RX Control FIFO data +#define REG_RX_CTRL_FIFO_DATA_LOW 0x4098 /* RX Control FIFO data low */ -#define REG_RX_CTRL_FIFO_DATA_MID 0x409C /* RX Control FIFO data +#define REG_RX_CTRL_FIFO_DATA_MID 0x409C /* RX Control FIFO data mid */ -#define REG_RX_CTRL_FIFO_DATA_HI 0x4100 /* RX Control FIFO data +#define REG_RX_CTRL_FIFO_DATA_HI 0x4100 /* RX Control FIFO data hi and flow id */ #define RX_CTRL_FIFO_DATA_HI_CTRL 0x0001 /* upper bit of ctrl word */ #define RX_CTRL_FIFO_DATA_HI_FLOW_MASK 0x007E /* flow id */ @@ -1004,7 +1004,7 @@ T1 */ /* 64-bit pointer to receive data buffer in host memory used for headers and - * small packets. MSB in high register. loaded by DMA state machine and + * small packets. MSB in high register. loaded by DMA state machine and * increments as DMA writes receive data. only 50 LSB are incremented. top * 13 bits taken from RX descriptor. * DEFAULT: undefined @@ -1013,17 +1013,17 @@ low */ #define REG_RX_HEADER_PAGE_PTR_HI 0x411C /* (ro) RX header page ptr high */ -#define REG_RX_MTU_PAGE_PTR_LOW 0x4120 /* (ro) RX MTU page pointer +#define REG_RX_MTU_PAGE_PTR_LOW 0x4120 /* (ro) RX MTU page pointer low */ -#define REG_RX_MTU_PAGE_PTR_HI 0x4124 /* (ro) RX MTU page pointer +#define REG_RX_MTU_PAGE_PTR_HI 0x4124 /* (ro) RX MTU page pointer high */ /* PIO diagnostic access to RX reassembly DMA Table RAM. 6-bit register holds * one of 64 79-bit locations in the RX Reassembly DMA table and the addr of - * one of the 64 byte locations in the Batching table. LOW holds 32 LSB. + * one of the 64 byte locations in the Batching table. LOW holds 32 LSB. * MID holds the next 32 LSB. HIGH holds the 15 MSB. RX_DMA_EN must be set * to 0 for PIO access. DATA_HIGH should be last write of write sequence. - * layout: + * layout: * reassmbl ptr [78:15] | reassmbl index [14:1] | reassmbl entry valid [0] * DEFAULT: undefined */ @@ -1033,7 +1033,7 @@ #define REG_RX_TABLE_DATA_LOW 0x412C /* RX reassembly DMA table data low */ -#define REG_RX_TABLE_DATA_MID 0x4130 /* RX reassembly DMA table +#define REG_RX_TABLE_DATA_MID 0x4130 /* RX reassembly DMA table data mid */ #define REG_RX_TABLE_DATA_HI 0x4134 /* RX reassembly DMA table data high */ @@ -1053,11 +1053,11 @@ #define REG_PLUS_RX_CBN_LOW(x) (REG_PLUS_RX_CB1_LOW + 8*((x) - 1)) #define REG_PLUS_RX_CBN_HI(x) (REG_PLUS_RX_CB1_HI + 8*((x) - 1)) #define REG_PLUS_RX_KICK1 0x4220 /* RX Kick 2 register */ -#define REG_PLUS_RX_COMP1 0x4224 /* (ro) RX completion 2 +#define REG_PLUS_RX_COMP1 0x4224 /* (ro) RX completion 2 reg */ -#define REG_PLUS_RX_COMP1_HEAD 0x4228 /* (ro) RX completion 2 +#define REG_PLUS_RX_COMP1_HEAD 0x4228 /* (ro) RX completion 2 head reg. 4 total. */ -#define REG_PLUS_RX_COMP1_TAIL 0x422C /* RX completion 2 +#define REG_PLUS_RX_COMP1_TAIL 0x422C /* RX completion 2 tail reg. 4 total. */ #define REG_PLUS_RX_COMPN_HEAD(x) (REG_PLUS_RX_COMP1_HEAD + 8*((x) - 1)) #define REG_PLUS_RX_COMPN_TAIL(x) (REG_PLUS_RX_COMP1_TAIL + 8*((x) - 1)) @@ -1068,13 +1068,13 @@ /** header parser registers **/ -/* RX parser configuration register. +/* RX parser configuration register. * DEFAULT: 0x1651004 */ -#define REG_HP_CFG 0x4140 /* header parser +#define REG_HP_CFG 0x4140 /* header parser configuration reg */ #define HP_CFG_PARSE_EN 0x00000001 /* enab header parsing */ -#define HP_CFG_NUM_CPU_MASK 0x000000FC /* # processors +#define HP_CFG_NUM_CPU_MASK 0x000000FC /* # processors 0 = 64. 0x3f = 63 */ #define HP_CFG_NUM_CPU_SHIFT 2 #define HP_CFG_SYN_INC_MASK 0x00000100 /* SYN bit won't increment @@ -1088,7 +1088,7 @@ /* access to RX Instruction RAM. 5-bit register/counter holds addr * of 39 bit entry to be read/written. 32 LSB in _DATA_LOW. 7 MSB in _DATA_HI. * RX_DMA_EN must be 0 for RX instr PIO access. DATA_HI should be last access - * of sequence. + * of sequence. * DEFAULT: undefined */ #define REG_HP_INSTR_RAM_ADDR 0x4144 /* HP instruction RAM @@ -1104,7 +1104,7 @@ #define HP_INSTR_RAM_LOW_OUTEN_SHIFT 20 #define HP_INSTR_RAM_LOW_OUTARG_MASK 0xFFC00000 #define HP_INSTR_RAM_LOW_OUTARG_SHIFT 22 -#define REG_HP_INSTR_RAM_DATA_MID 0x414C /* HP instruction RAM +#define REG_HP_INSTR_RAM_DATA_MID 0x414C /* HP instruction RAM data mid */ #define HP_INSTR_RAM_MID_OUTARG_MASK 0x00000003 #define HP_INSTR_RAM_MID_OUTARG_SHIFT 0 @@ -1131,7 +1131,7 @@ * 11-bit register. Data fills the LSB portion of bus if less than 32 bits. * DATA_RAM: write RAM_FDB_DATA with index to access DATA_RAM. * RAM bytes = 4*(x - 1) + [3:0]. e.g., 0 -> [3:0], 31 -> [123:120] - * FLOWDB: write DATA_RAM_FDB register and then read/write FDB1-12 to access + * FLOWDB: write DATA_RAM_FDB register and then read/write FDB1-12 to access * flow database. * RX_DMA_EN must be 0 for RX parser RAM PIO access. RX Parser RAM data reg * should be the last write access of the write sequence. @@ -1139,17 +1139,17 @@ */ #define REG_HP_DATA_RAM_FDB_ADDR 0x4154 /* HP data and FDB RAM address */ -#define HP_DATA_RAM_FDB_DATA_MASK 0x001F /* select 1 of 86 byte - locations in header - parser data ram to +#define HP_DATA_RAM_FDB_DATA_MASK 0x001F /* select 1 of 86 byte + locations in header + parser data ram to read/write */ #define HP_DATA_RAM_FDB_FDB_MASK 0x3F00 /* 1 of 64 353-bit locations in the flow database */ #define REG_HP_DATA_RAM_DATA 0x4158 /* HP data RAM data */ -/* HP flow database registers: 1 - 12, 0x415C - 0x4188, 4 8-bit bytes +/* HP flow database registers: 1 - 12, 0x415C - 0x4188, 4 8-bit bytes * FLOW_DB(1) = IP_SA[127:96], FLOW_DB(2) = IP_SA[95:64] - * FLOW_DB(3) = IP_SA[63:32], FLOW_DB(4) = IP_SA[31:0] + * FLOW_DB(3) = IP_SA[63:32], FLOW_DB(4) = IP_SA[31:0] * FLOW_DB(5) = IP_DA[127:96], FLOW_DB(6) = IP_DA[95:64] * FLOW_DB(7) = IP_DA[63:32], FLOW_DB(8) = IP_DA[31:0] * FLOW_DB(9) = {TCP_SP[15:0],TCP_DP[15:0]} @@ -1159,7 +1159,7 @@ #define REG_HP_FLOW_DB0 0x415C /* HP flow database 1 reg */ #define REG_HP_FLOW_DBN(x) (REG_HP_FLOW_DB0 + (x)*4) -/* diagnostics for RX Header Parser block. +/* diagnostics for RX Header Parser block. * ASUN: the header parser state machine register is used for diagnostics * purposes. however, the spec doesn't have any details on it. */ @@ -1167,7 +1167,7 @@ #define REG_HP_STATUS0 0x4190 /* (ro) HP status 1 */ #define HP_STATUS0_SAP_MASK 0xFFFF0000 /* SAP */ #define HP_STATUS0_L3_OFF_MASK 0x0000FE00 /* L3 offset */ -#define HP_STATUS0_LB_CPUNUM_MASK 0x000001F8 /* load balancing CPU +#define HP_STATUS0_LB_CPUNUM_MASK 0x000001F8 /* load balancing CPU number */ #define HP_STATUS0_HRP_OPCODE_MASK 0x00000007 /* HRP opcode */ @@ -1179,11 +1179,11 @@ #define REG_HP_STATUS2 0x4198 /* (ro) HP status 3 */ #define HP_STATUS2_ACCUR2_MASK 0xF0000000 /* accu R2[3:0] */ -#define HP_STATUS2_CSUM_OFF_MASK 0x07F00000 /* checksum start +#define HP_STATUS2_CSUM_OFF_MASK 0x07F00000 /* checksum start start offset */ #define HP_STATUS2_ACCUR1_MASK 0x000FE000 /* accu R1 */ #define HP_STATUS2_FORCE_DROP 0x00001000 /* force drop */ -#define HP_STATUS2_BWO_REASSM 0x00000800 /* batching w/o +#define HP_STATUS2_BWO_REASSM 0x00000800 /* batching w/o reassembly */ #define HP_STATUS2_JH_SPLIT_EN 0x00000400 /* jumbo header split enable */ @@ -1191,9 +1191,9 @@ check */ #define HP_STATUS2_DATA_MASK_ZERO 0x00000100 /* mask of data length equal to zero */ -#define HP_STATUS2_FORCE_TCP_CHECK 0x00000080 /* force tcp payload +#define HP_STATUS2_FORCE_TCP_CHECK 0x00000080 /* force tcp payload chk */ -#define HP_STATUS2_MASK_TCP_THRESH 0x00000040 /* mask of payload +#define HP_STATUS2_MASK_TCP_THRESH 0x00000040 /* mask of payload threshold */ #define HP_STATUS2_NO_ASSIST 0x00000020 /* no assist */ #define HP_STATUS2_CTRL_PACKET_FLAG 0x00000010 /* control packet flag */ @@ -1214,7 +1214,7 @@ #define HP_RAM_BIST_HP_INSTR2_PASS 0x10000000 /* HP instr ram 2 */ #define HP_RAM_BIST_FDBM_AGE0_PASS 0x08000000 /* FDBM aging RAM0 */ #define HP_RAM_BIST_FDBM_AGE1_PASS 0x04000000 /* FDBM aging RAM1 */ -#define HP_RAM_BIST_FDBM_FLOWID00_PASS 0x02000000 /* FDBM flowid RAM0 +#define HP_RAM_BIST_FDBM_FLOWID00_PASS 0x02000000 /* FDBM flowid RAM0 bank 0 */ #define HP_RAM_BIST_FDBM_FLOWID10_PASS 0x01000000 /* FDBM flowid RAM1 bank 0 */ @@ -1247,25 +1247,25 @@ /* execute a pause flow control frame transmission DEFAULT: 0x0XXXX */ #define REG_MAC_SEND_PAUSE 0x6008 /* send pause command reg */ -#define MAC_SEND_PAUSE_TIME_MASK 0x0000FFFF /* value of pause time +#define MAC_SEND_PAUSE_TIME_MASK 0x0000FFFF /* value of pause time to be sent on network - in units of slot + in units of slot times */ #define MAC_SEND_PAUSE_SEND 0x00010000 /* send pause flow ctrl frame on network */ /* bit set indicates that event occurred. auto-cleared when status register - * is read and have corresponding mask bits in mask register. events will - * trigger an interrupt if the corresponding mask bit is 0. + * is read and have corresponding mask bits in mask register. events will + * trigger an interrupt if the corresponding mask bit is 0. * status register default: 0x00000000 * mask register default = 0xFFFFFFFF on reset */ #define REG_MAC_TX_STATUS 0x6010 /* TX MAC status reg */ -#define MAC_TX_FRAME_XMIT 0x0001 /* successful frame +#define MAC_TX_FRAME_XMIT 0x0001 /* successful frame transmision */ -#define MAC_TX_UNDERRUN 0x0002 /* terminated frame +#define MAC_TX_UNDERRUN 0x0002 /* terminated frame transmission due to - data starvation in the + data starvation in the xmit data path */ #define MAC_TX_MAX_PACKET_ERR 0x0004 /* frame exceeds max allowed length passed to TX MAC @@ -1286,7 +1286,7 @@ #define REG_MAC_RX_STATUS 0x6014 /* RX MAC status reg */ #define MAC_RX_FRAME_RECV 0x0001 /* successful receipt of a frame */ -#define MAC_RX_OVERFLOW 0x0002 /* dropped frame due to +#define MAC_RX_OVERFLOW 0x0002 /* dropped frame due to RX FIFO overflow */ #define MAC_RX_FRAME_COUNT 0x0004 /* rollover of receive frame counter */ @@ -1294,27 +1294,27 @@ error counter */ #define MAC_RX_CRC_ERR 0x0010 /* rollover of crc error counter */ -#define MAC_RX_LEN_ERR 0x0020 /* rollover of length +#define MAC_RX_LEN_ERR 0x0020 /* rollover of length error counter */ -#define MAC_RX_VIOL_ERR 0x0040 /* rollover of code +#define MAC_RX_VIOL_ERR 0x0040 /* rollover of code violation error */ /* DEFAULT: 0xXXXX0000 on reset */ #define REG_MAC_CTRL_STATUS 0x6018 /* MAC control status reg */ -#define MAC_CTRL_PAUSE_RECEIVED 0x00000001 /* successful - reception of a - pause control +#define MAC_CTRL_PAUSE_RECEIVED 0x00000001 /* successful + reception of a + pause control frame */ -#define MAC_CTRL_PAUSE_STATE 0x00000002 /* MAC has made a - transition from - "not paused" to +#define MAC_CTRL_PAUSE_STATE 0x00000002 /* MAC has made a + transition from + "not paused" to "paused" */ -#define MAC_CTRL_NOPAUSE_STATE 0x00000004 /* MAC has made a - transition from +#define MAC_CTRL_NOPAUSE_STATE 0x00000004 /* MAC has made a + transition from "paused" to "not paused" */ #define MAC_CTRL_PAUSE_TIME_MASK 0xFFFF0000 /* value of pause time - operand that was + operand that was received in the last pause flow control frame */ @@ -1326,13 +1326,13 @@ /* layout identical to CTRL MAC[2:0] */ #define REG_MAC_CTRL_MASK 0x6028 /* MAC control mask reg */ -/* to ensure proper operation, CFG_EN must be cleared to 0 and a delay +/* to ensure proper operation, CFG_EN must be cleared to 0 and a delay * imposed before writes to other bits in the TX_MAC_CFG register or any of * the MAC parameters is performed. delay dependent upon time required to * transmit a maximum size frame (= MAC_FRAMESIZE_MAX*8/Mbps). e.g., - * the delay for a 1518-byte frame on a 100Mbps network is 125us. - * alternatively, just poll TX_CFG_EN until it reads back as 0. - * NOTE: on half-duplex 1Gbps, TX_CFG_CARRIER_EXTEND and + * the delay for a 1518-byte frame on a 100Mbps network is 125us. + * alternatively, just poll TX_CFG_EN until it reads back as 0. + * NOTE: on half-duplex 1Gbps, TX_CFG_CARRIER_EXTEND and * RX_CFG_CARRIER_EXTEND should be set and the SLOT_TIME register should * be 0x200 (slot time of 512 bytes) */ @@ -1340,12 +1340,12 @@ #define MAC_TX_CFG_EN 0x0001 /* enable TX MAC. 0 will force TXMAC state machine to remain in - idle state or to + idle state or to transition to idle state on completion of an ongoing packet. */ #define MAC_TX_CFG_IGNORE_CARRIER 0x0002 /* disable CSMA/CD deferral - process. set to 1 when + process. set to 1 when full duplex and 0 when half duplex */ #define MAC_TX_CFG_IGNORE_COLL 0x0004 /* disable CSMA/CD backoff @@ -1353,32 +1353,32 @@ full duplex and 0 when half duplex */ #define MAC_TX_CFG_IPG_EN 0x0008 /* enable extension of the - Rx-to-TX IPG. after - receiving a frame, TX - MAC will reset its - deferral process to + Rx-to-TX IPG. after + receiving a frame, TX + MAC will reset its + deferral process to carrier sense for the amount of time = IPG0 + - IPG1 and commit to + IPG1 and commit to transmission for time specified in IPG2. when 0 or when xmitting frames back-to-pack (Tx-to-Tx - IPG), TX MAC ignores + IPG), TX MAC ignores IPG0 and will only use IPG1 for deferral time. IPG2 still used. */ #define MAC_TX_CFG_NEVER_GIVE_UP_EN 0x0010 /* TX MAC will not easily - give up on frame - xmission. if backoff + give up on frame + xmission. if backoff algorithm reaches the ATTEMPT_LIMIT, it will clear attempts counter and continue trying to - send the frame as - specified by + send the frame as + specified by GIVE_UP_LIM. when 0, - TX MAC will execute + TX MAC will execute standard CSMA/CD prot. */ #define MAC_TX_CFG_NEVER_GIVE_UP_LIM 0x0020 /* when set, TX MAC will continue to try to xmit @@ -1386,13 +1386,13 @@ 0, TX MAC will continue to try xmitting until successful or backoff - algorithm reaches + algorithm reaches ATTEMPT_LIMIT*16 */ #define MAC_TX_CFG_NO_BACKOFF 0x0040 /* modify CSMA/CD to disable backoff algorithm. TX MAC will not back off after a xmission attempt - that resulted in a + that resulted in a collision. */ #define MAC_TX_CFG_SLOW_DOWN 0x0080 /* modify CSMA/CD so that deferral process is reset @@ -1408,11 +1408,11 @@ packets. when clear, CRC generation is dependent upon NO_CRC bit in the - xmit control word from + xmit control word from TX DMA */ #define MAC_TX_CFG_CARRIER_EXTEND 0x0200 /* enables xmit part of the - carrier extension - feature. this allows for + carrier extension + feature. this allows for longer collision domains by extending the carrier and collision window @@ -1422,44 +1422,44 @@ for half-duplex at 1Gbps, clear otherwise. */ -/* when CRC is not stripped, reassembly packets will not contain the CRC. +/* when CRC is not stripped, reassembly packets will not contain the CRC. * these will be stripped by HRP because it reassembles layer 4 data, and the - * CRC is layer 2. however, non-reassembly packets will still contain the CRC + * CRC is layer 2. however, non-reassembly packets will still contain the CRC * when passed to the host. to ensure proper operation, need to wait 3.2ms * after clearing RX_CFG_EN before writing to any other RX MAC registers * or other MAC parameters. alternatively, poll RX_CFG_EN until it clears - * to 0. similary, HASH_FILTER_EN and ADDR_FILTER_EN have the same + * to 0. similary, HASH_FILTER_EN and ADDR_FILTER_EN have the same * restrictions as CFG_EN. */ #define REG_MAC_RX_CFG 0x6034 /* RX MAC config reg */ #define MAC_RX_CFG_EN 0x0001 /* enable RX MAC */ #define MAC_RX_CFG_STRIP_PAD 0x0002 /* always program to 0. feature not supported */ -#define MAC_RX_CFG_STRIP_FCS 0x0004 /* RX MAC will strip the - last 4 bytes of a +#define MAC_RX_CFG_STRIP_FCS 0x0004 /* RX MAC will strip the + last 4 bytes of a received frame. */ #define MAC_RX_CFG_PROMISC_EN 0x0008 /* promiscuous mode */ -#define MAC_RX_CFG_PROMISC_GROUP_EN 0x0010 /* accept all valid +#define MAC_RX_CFG_PROMISC_GROUP_EN 0x0010 /* accept all valid multicast frames (group bit in DA field set) */ #define MAC_RX_CFG_HASH_FILTER_EN 0x0020 /* use hash table to filter multicast addresses */ -#define MAC_RX_CFG_ADDR_FILTER_EN 0x0040 /* cause RX MAC to use - address filtering regs +#define MAC_RX_CFG_ADDR_FILTER_EN 0x0040 /* cause RX MAC to use + address filtering regs to filter both unicast - and multicast + and multicast addresses */ #define MAC_RX_CFG_DISABLE_DISCARD 0x0080 /* pass errored frames to RX DMA by setting BAD bit but not Abort bit - in the status. CRC, + in the status. CRC, framing, and length errs - will not increment + will not increment error counters. frames which don't match dest addr will be passed up w/ BAD bit set. */ -#define MAC_RX_CFG_CARRIER_EXTEND 0x0100 /* enable reception of +#define MAC_RX_CFG_CARRIER_EXTEND 0x0100 /* enable reception of packet bursts generated by carrier extension with packet bursting @@ -1468,18 +1468,18 @@ /* DEFAULT: 0x0 */ #define REG_MAC_CTRL_CFG 0x6038 /* MAC control config reg */ -#define MAC_CTRL_CFG_SEND_PAUSE_EN 0x0001 /* respond to requests for - sending pause flow ctrl +#define MAC_CTRL_CFG_SEND_PAUSE_EN 0x0001 /* respond to requests for + sending pause flow ctrl frames */ -#define MAC_CTRL_CFG_RECV_PAUSE_EN 0x0002 /* respond to received +#define MAC_CTRL_CFG_RECV_PAUSE_EN 0x0002 /* respond to received pause flow ctrl frames */ #define MAC_CTRL_CFG_PASS_CTRL 0x0004 /* pass valid MAC ctrl packets to RX DMA */ /* to ensure proper operation, a global initialization sequence should be * performed when a loopback config is entered or exited. if programmed after - * a hw or global sw reset, RX/TX MAC software reset and initialization - * should be done to ensure stable clocking. + * a hw or global sw reset, RX/TX MAC software reset and initialization + * should be done to ensure stable clocking. * DEFAULT: 0x0 */ #define REG_MAC_XIF_CFG 0x603C /* XIF config reg */ @@ -1489,26 +1489,26 @@ path to GMII recv data path. phy mode register clock selection must be - set to GMII mode and + set to GMII mode and GMII_MODE should be set to 1. in loopback mode, REFCLK will drive the entire mac core. 0 for normal operation. */ #define MAC_XIF_DISABLE_ECHO 0x0004 /* disables receive data - path during packet + path during packet xmission. clear to 0 in any full duplex mode, in any loopback mode, or in half-duplex SERDES or SLINK modes. set when - in half-duplex when + in half-duplex when using external phy. */ #define MAC_XIF_GMII_MODE 0x0008 /* MAC operates with GMII clocks and datapath */ #define MAC_XIF_MII_BUFFER_OUTPUT_EN 0x0010 /* MII_BUF_EN pin. enable external tristate buffer - on the MII receive + on the MII receive bus. */ #define MAC_XIF_LINK_LED 0x0020 /* LINKLED# active (low) */ #define MAC_XIF_FDPLX_LED 0x0040 /* FDPLXLED# active (low) */ @@ -1521,7 +1521,7 @@ recommended: 0x04 */ #define REG_MAC_SLOT_TIME 0x604C /* slot time reg recommended: 0x40 */ -#define REG_MAC_FRAMESIZE_MIN 0x6050 /* min frame size reg +#define REG_MAC_FRAMESIZE_MIN 0x6050 /* min frame size reg recommended: 0x40 */ /* FRAMESIZE_MAX holds both the max frame size as well as the max burst size. @@ -1536,39 +1536,39 @@ preamble bytes that the TX MAC will xmit at the beginning of each frame - value should be 2 or - greater. recommended + value should be 2 or + greater. recommended value: 0x07 */ -#define REG_MAC_JAM_SIZE 0x605C /* jam size reg. duration +#define REG_MAC_JAM_SIZE 0x605C /* jam size reg. duration of jam in units of media byte time. recommended value: 0x04 */ #define REG_MAC_ATTEMPT_LIMIT 0x6060 /* attempt limit reg. # of attempts TX MAC will - make to xmit a frame + make to xmit a frame before it resets its attempts counter. after - the limit has been + the limit has been reached, TX MAC may or may not drop the frame dependent upon value - in TX_MAC_CFG. - recommended + in TX_MAC_CFG. + recommended value: 0x10 */ #define REG_MAC_CTRL_TYPE 0x6064 /* MAC control type reg. - type field of a MAC + type field of a MAC ctrl frame. recommended value: 0x8808 */ /* mac address registers: 0 - 44, 0x6080 - 0x6130, 4 8-bit bytes. - * register contains comparison + * register contains comparison * 0 16 MSB of primary MAC addr [47:32] of DA field * 1 16 middle bits "" [31:16] of DA field * 2 16 LSB "" [15:0] of DA field * 3*x 16MSB of alt MAC addr 1-15 [47:32] of DA field * 4*x 16 middle bits "" [31:16] * 5*x 16 LSB "" [15:0] - * 42 16 MSB of MAC CTRL addr [47:32] of DA. + * 42 16 MSB of MAC CTRL addr [47:32] of DA. * 43 16 middle bits "" [31:16] * 44 16 LSB "" [15:0] * MAC CTRL addr must be the reserved multicast addr for MAC CTRL frames. @@ -1586,39 +1586,39 @@ #define REG_MAC_ADDRN(x) (REG_MAC_ADDR0 + (x)*4) #define REG_MAC_ADDR_FILTER0 0x614C /* address filter 0 reg [47:32] */ -#define REG_MAC_ADDR_FILTER1 0x6150 /* address filter 1 reg +#define REG_MAC_ADDR_FILTER1 0x6150 /* address filter 1 reg [31:16] */ -#define REG_MAC_ADDR_FILTER2 0x6154 /* address filter 2 reg +#define REG_MAC_ADDR_FILTER2 0x6154 /* address filter 2 reg [15:0] */ #define REG_MAC_ADDR_FILTER2_1_MASK 0x6158 /* address filter 2 and 1 mask reg. 8-bit reg contains nibble mask for reg 2 and 1. */ -#define REG_MAC_ADDR_FILTER0_MASK 0x615C /* address filter 0 mask +#define REG_MAC_ADDR_FILTER0_MASK 0x615C /* address filter 0 mask reg */ -/* hash table registers: 0 - 15, 0x6160 - 0x619C, 4 8-bit bytes +/* hash table registers: 0 - 15, 0x6160 - 0x619C, 4 8-bit bytes * 16-bit registers contain bits of the hash table. - * reg x -> [16*(15 - x) + 15 : 16*(15 - x)]. + * reg x -> [16*(15 - x) + 15 : 16*(15 - x)]. * e.g., 15 -> [15:0], 0 -> [255:240] */ #define REG_MAC_HASH_TABLE0 0x6160 /* hash table 0 reg */ #define REG_MAC_HASH_TABLEN(x) (REG_MAC_HASH_TABLE0 + (x)*4) -/* statistics registers. these registers generate an interrupt on +/* statistics registers. these registers generate an interrupt on * overflow. recommended initialization: 0x0000. most are 16-bits except * for PEAK_ATTEMPTS register which is 8 bits. */ -#define REG_MAC_COLL_NORMAL 0x61A0 /* normal collision +#define REG_MAC_COLL_NORMAL 0x61A0 /* normal collision counter. */ #define REG_MAC_COLL_FIRST 0x61A4 /* first attempt - successful collision + successful collision counter */ -#define REG_MAC_COLL_EXCESS 0x61A8 /* excessive collision +#define REG_MAC_COLL_EXCESS 0x61A8 /* excessive collision counter */ #define REG_MAC_COLL_LATE 0x61AC /* late collision counter */ -#define REG_MAC_TIMER_DEFER 0x61B0 /* defer timer. time base - is the media byte +#define REG_MAC_TIMER_DEFER 0x61B0 /* defer timer. time base + is the media byte clock/256 */ #define REG_MAC_ATTEMPTS_PEAK 0x61B4 /* peak attempts reg */ #define REG_MAC_RECV_FRAME 0x61B8 /* receive frame counter */ @@ -1633,13 +1633,13 @@ 10-bit register used as a seed for the random number generator for the CSMA/CD - backoff algorithm. only + backoff algorithm. only programmed after power-on - reset and should be a - random value which has a - high likelihood of being - unique for each MAC - attached to a network + reset and should be a + random value which has a + high likelihood of being + unique for each MAC + attached to a network segment (e.g., 10 LSB of MAC address) */ @@ -1649,7 +1649,7 @@ /* 27-bit register has the current state for key state machines in the MAC */ #define REG_MAC_STATE_MACHINE 0x61D0 /* (ro) state machine reg */ -#define MAC_SM_RLM_MASK 0x07800000 +#define MAC_SM_RLM_MASK 0x07800000 #define MAC_SM_RLM_SHIFT 23 #define MAC_SM_RX_FC_MASK 0x00700000 #define MAC_SM_RX_FC_SHIFT 20 @@ -1666,26 +1666,26 @@ #define MAC_SM_TX_FIFO_EMPTY_MASK 0x00000007 #define MAC_SM_TX_FIFO_EMPTY_SHIFT 0 -/** MIF registers. the MIF can be programmed in either bit-bang or +/** MIF registers. the MIF can be programmed in either bit-bang or * frame mode. **/ #define REG_MIF_BIT_BANG_CLOCK 0x6200 /* MIF bit-bang clock. - 1 -> 0 will generate a + 1 -> 0 will generate a rising edge. 0 -> 1 will generate a falling edge. */ #define REG_MIF_BIT_BANG_DATA 0x6204 /* MIF bit-bang data. 1-bit register generates data */ -#define REG_MIF_BIT_BANG_OUTPUT_EN 0x6208 /* MIF bit-bang output - enable. enable when +#define REG_MIF_BIT_BANG_OUTPUT_EN 0x6208 /* MIF bit-bang output + enable. enable when xmitting data from MIF to transceiver. */ -/* 32-bit register serves as an instruction register when the MIF is +/* 32-bit register serves as an instruction register when the MIF is * programmed in frame mode. load this register w/ a valid instruction * (as per IEEE 802.3u MII spec). poll this register to check for instruction * execution completion. during a read operation, this register will also - * contain the 16-bit data returned by the tranceiver. unless specified - * otherwise, fields are considered "don't care" when polling for + * contain the 16-bit data returned by the tranceiver. unless specified + * otherwise, fields are considered "don't care" when polling for * completion. */ #define REG_MIF_FRAME 0x620C /* MIF frame/output reg */ @@ -1693,14 +1693,14 @@ load w/ 01 when issuing an instr */ #define MIF_FRAME_ST 0x40000000 /* STart of frame */ -#define MIF_FRAME_OPCODE_MASK 0x30000000 /* opcode. 01 for a - write. 10 for a +#define MIF_FRAME_OPCODE_MASK 0x30000000 /* opcode. 01 for a + write. 10 for a read */ #define MIF_FRAME_OP_READ 0x20000000 /* read OPcode */ #define MIF_FRAME_OP_WRITE 0x10000000 /* write OPcode */ #define MIF_FRAME_PHY_ADDR_MASK 0x0F800000 /* phy address. when issuing an instr, - this field should be + this field should be loaded w/ the XCVR addr */ #define MIF_FRAME_PHY_ADDR_SHIFT 23 @@ -1724,12 +1724,12 @@ to be written in transceiver reg for a write. doesn't matter - in a read. when - polling for + in a read. when + polling for completion, field is "don't care" for write - and 16-bit data - returned by the + and 16-bit data + returned by the transceiver for a read (if valid bit is set) */ @@ -1748,16 +1748,16 @@ #define MIF_CFG_POLL_REG_SHIFT 3 #define MIF_CFG_MDIO_0 0x0100 /* (ro) dual purpose. when MDIO_0 is idle, - 1 -> tranceiver is + 1 -> tranceiver is connected to MDIO_0. when MIF is communicating - w/ MDIO_0 in bit-bang + w/ MDIO_0 in bit-bang mode, this bit indicates the incoming bit stream during a read op */ #define MIF_CFG_MDIO_1 0x0200 /* (ro) dual purpose. - when MDIO_1 is idle, - 1 -> transceiver is + when MDIO_1 is idle, + 1 -> transceiver is connected to MDIO_1. when MIF is communicating w/ MDIO_1 in bit-bang @@ -1770,7 +1770,7 @@ /* 16-bit register used to determine which bits in the POLL_STATUS portion of * the MIF_STATUS register will cause an interrupt. if a mask bit is 0, - * corresponding bit of the POLL_STATUS will generate a MIF interrupt when + * corresponding bit of the POLL_STATUS will generate a MIF interrupt when * set. DEFAULT: 0xFFFF */ #define REG_MIF_MASK 0x6214 /* MIF mask reg */ @@ -1779,7 +1779,7 @@ #define REG_MIF_STATUS 0x6218 /* MIF status reg */ #define MIF_STATUS_POLL_DATA_MASK 0xFFFF0000 /* poll data contains the "latest image" - update of the XCVR + update of the XCVR reg being read */ #define MIF_STATUS_POLL_DATA_SHIFT 16 #define MIF_STATUS_POLL_STATUS_MASK 0x0000FFFF /* poll status indicates @@ -1792,19 +1792,19 @@ /* 7-bit register has current state for all state machines in the MIF */ #define REG_MIF_STATE_MACHINE 0x621C /* MIF state machine reg */ -#define MIF_SM_CONTROL_MASK 0x07 /* control state machine +#define MIF_SM_CONTROL_MASK 0x07 /* control state machine state */ #define MIF_SM_EXECUTION_MASK 0x60 /* execution state machine state */ /** PCS/Serialink. the following registers are equivalent to the standard - * MII management registers except that they're directly mapped in + * MII management registers except that they're directly mapped in * Cassini's register space. **/ /* the auto-negotiation enable bit should be programmed the same at * the link partner as in the local device to enable auto-negotiation to - * complete. when that bit is reprogrammed, auto-neg/manual config is + * complete. when that bit is reprogrammed, auto-neg/manual config is * restarted automatically. * DEFAULT: 0x1040 */ @@ -1815,10 +1815,10 @@ to MAC interface is activated regardless of activity */ -#define PCS_MII_CTRL_DUPLEX 0x0100 /* forced 0x0. PCS +#define PCS_MII_CTRL_DUPLEX 0x0100 /* forced 0x0. PCS behaviour same for half and full dplx */ -#define PCS_MII_RESTART_AUTONEG 0x0200 /* self clearing. +#define PCS_MII_RESTART_AUTONEG 0x0200 /* self clearing. restart auto- negotiation */ #define PCS_MII_ISOLATE 0x0400 /* read as 0. ignored @@ -1829,10 +1829,10 @@ through automatic link config before it can be used. when 0, - link can be used + link can be used w/out any link config phase */ -#define PCS_MII_10_100_SEL 0x2000 /* read as 0. ignored on +#define PCS_MII_10_100_SEL 0x2000 /* read as 0. ignored on writes */ #define PCS_MII_RESET 0x8000 /* reset PCS. self-clears when done */ @@ -1841,7 +1841,7 @@ #define REG_PCS_MII_STATUS 0x9004 /* PCS MII status reg */ #define PCS_MII_STATUS_EXTEND_CAP 0x0001 /* reads 0 */ #define PCS_MII_STATUS_JABBER_DETECT 0x0002 /* reads 0 */ -#define PCS_MII_STATUS_LINK_STATUS 0x0004 /* 1 -> link up. +#define PCS_MII_STATUS_LINK_STATUS 0x0004 /* 1 -> link up. 0 -> link down. 0 is latched so that 0 is kept until read. read @@ -1853,7 +1853,7 @@ from received link code word. only valid after auto-neg completed */ -#define PCS_MII_STATUS_AUTONEG_COMP 0x0020 /* 1 -> auto-negotiation +#define PCS_MII_STATUS_AUTONEG_COMP 0x0020 /* 1 -> auto-negotiation completed 0 -> auto-negotiation not completed */ @@ -1862,7 +1862,7 @@ a 1000 Base-X PHY. writes to it are ignored */ -/* used during auto-negotiation. +/* used during auto-negotiation. * DEFAULT: 0x00E0 */ #define REG_PCS_MII_ADVERT 0x9008 /* PCS MII advertisement @@ -1873,7 +1873,7 @@ 1000 Base-X */ #define PCS_MII_ADVERT_SYM_PAUSE 0x0080 /* advertise PAUSE symmetric capability */ -#define PCS_MII_ADVERT_ASYM_PAUSE 0x0100 /* advertises PAUSE +#define PCS_MII_ADVERT_ASYM_PAUSE 0x0100 /* advertises PAUSE asymmetric capability */ #define PCS_MII_ADVERT_RF_MASK 0x3000 /* remote fault. write bit13 to optionally indicate to @@ -1881,7 +1881,7 @@ going off-line. bit12 will get set when signal detect == FAIL and will - remain set until + remain set until successful negotiation */ #define PCS_MII_ADVERT_ACK 0x4000 /* (ro) */ #define PCS_MII_ADVERT_NEXT_PAGE 0x8000 /* (ro) forced 0x0 */ @@ -1905,7 +1905,7 @@ 0 when modifying PCS_MII_ADVERT */ #define PCS_CFG_SD_OVERRIDE 0x02 /* sets signal detect to - OK. bit is + OK. bit is non-resettable */ #define PCS_CFG_SD_ACTIVE_LOW 0x04 /* changes interpretation of optical signal to make @@ -1914,23 +1914,23 @@ #define PCS_CFG_JITTER_STUDY_MASK 0x18 /* used to make jitter measurements. a single code group is xmitted - regularly. + regularly. 0x0 = normal operation - 0x1 = high freq test + 0x1 = high freq test pattern, D21.5 0x2 = low freq test pattern, K28.7 0x3 = reserved */ #define PCS_CFG_10MS_TIMER_OVERRIDE 0x20 /* shortens 10-20ms auto- - negotiation timer to + negotiation timer to a few cycles for test purposes */ /* used for diagnostic purposes. bits 20-22 autoclear on read */ -#define REG_PCS_STATE_MACHINE 0x9014 /* (ro) PCS state machine +#define REG_PCS_STATE_MACHINE 0x9014 /* (ro) PCS state machine and diagnostic reg */ -#define PCS_SM_TX_STATE_MASK 0x0000000F /* 0 and 1 indicate - xmission of idle. +#define PCS_SM_TX_STATE_MASK 0x0000000F /* 0 and 1 indicate + xmission of idle. otherwise, xmission of a packet */ #define PCS_SM_RX_STATE_MASK 0x000000F0 /* 0 indicates reception @@ -1943,39 +1943,39 @@ Config codes. cycling through 0-1 indicates reception of idles */ -#define PCS_SM_LINK_STATE_MASK 0x0001E000 +#define PCS_SM_LINK_STATE_MASK 0x0001E000 #define SM_LINK_STATE_UP 0x00016000 /* link state is up */ #define PCS_SM_LOSS_LINK_C 0x00100000 /* loss of link due to - recept of Config + recept of Config codes */ #define PCS_SM_LOSS_LINK_SYNC 0x00200000 /* loss of link due to loss of sync */ -#define PCS_SM_LOSS_SIGNAL_DETECT 0x00400000 /* signal detect goes +#define PCS_SM_LOSS_SIGNAL_DETECT 0x00400000 /* signal detect goes from OK to FAIL. bit29 - will also be set if + will also be set if this is set */ #define PCS_SM_NO_LINK_BREAKLINK 0x01000000 /* link not up due to receipt of breaklink C codes from partner. C codes w/ 0 content received triggering - start/restart of - autonegotiation. + start/restart of + autonegotiation. should be sent for no longer than 20ms */ -#define PCS_SM_NO_LINK_SERDES 0x02000000 /* serdes being +#define PCS_SM_NO_LINK_SERDES 0x02000000 /* serdes being initialized. see serdes state reg */ #define PCS_SM_NO_LINK_C 0x04000000 /* C codes not stable or not received */ -#define PCS_SM_NO_LINK_SYNC 0x08000000 /* word sync not +#define PCS_SM_NO_LINK_SYNC 0x08000000 /* word sync not achieved */ -#define PCS_SM_NO_LINK_WAIT_C 0x10000000 /* waiting for C codes +#define PCS_SM_NO_LINK_WAIT_C 0x10000000 /* waiting for C codes w/ ack bit set */ #define PCS_SM_NO_LINK_NO_IDLE 0x20000000 /* link partner continues - to send C codes - instead of idle + to send C codes + instead of idle symbols or pkt data */ /* this register indicates interrupt changes in specific PCS MII status bits. @@ -1991,21 +1991,21 @@ * DEFAULT: none */ #define REG_PCS_DATAPATH_MODE 0x9050 /* datapath mode reg */ -#define PCS_DATAPATH_MODE_MII 0x00 /* PCS is not used and - MII/GMII is selected. +#define PCS_DATAPATH_MODE_MII 0x00 /* PCS is not used and + MII/GMII is selected. selection between MII and - GMII is controlled by + GMII is controlled by XIF_CFG */ #define PCS_DATAPATH_MODE_SERDES 0x02 /* PCS is used via the 10-bit interface */ /* input to serdes chip or serialink block */ #define REG_PCS_SERDES_CTRL 0x9054 /* serdes control reg */ -#define PCS_SERDES_CTRL_LOOPBACK 0x01 /* enable loopback on +#define PCS_SERDES_CTRL_LOOPBACK 0x01 /* enable loopback on serdes interface */ #define PCS_SERDES_CTRL_SYNCD_EN 0x02 /* enable sync carrier detection. should be - 0x0 for normal + 0x0 for normal operation */ #define PCS_SERDES_CTRL_LOCKREF 0x04 /* frequency-lock RBC[0:1] to REFCLK when set. @@ -2014,28 +2014,28 @@ serial data */ /* multiplex test outputs into the PROM address (PA_3 through PA_0) pins. - * should be 0x0 for normal operations. + * should be 0x0 for normal operations. * 0b000 normal operation, PROM address[3:0] selected - * 0b001 rxdma req, rxdma ack, rxdma ready, rxdma read - * 0b010 rxmac req, rx ack, rx tag, rx clk shared - * 0b011 txmac req, tx ack, tx tag, tx retry req - * 0b100 tx tp3, tx tp2, tx tp1, tx tp0 + * 0b001 rxdma req, rxdma ack, rxdma ready, rxdma read + * 0b010 rxmac req, rx ack, rx tag, rx clk shared + * 0b011 txmac req, tx ack, tx tag, tx retry req + * 0b100 tx tp3, tx tp2, tx tp1, tx tp0 * 0b101 R period RX, R period TX, R period HP, R period BIM * DEFAULT: 0x0 */ #define REG_PCS_SHARED_OUTPUT_SEL 0x9058 /* shared output select */ #define PCS_SOS_PROM_ADDR_MASK 0x0007 -/* used for diagnostics. this register indicates progress of the SERDES - * boot up. +/* used for diagnostics. this register indicates progress of the SERDES + * boot up. * 0b00 undergoing reset * 0b01 waiting 500us while lockrefn is asserted * 0b10 waiting for comma detect - * 0b11 receive data is synchronized + * 0b11 receive data is synchronized * DEFAULT: 0x0 */ #define REG_PCS_SERDES_STATE 0x905C /* (ro) serdes state */ -#define PCS_SERDES_STATE_MASK 0x03 +#define PCS_SERDES_STATE_MASK 0x03 /* used for diagnostics. indicates number of packets transmitted or received. * counters rollover w/out generating an interrupt. @@ -2044,18 +2044,18 @@ #define REG_PCS_PACKET_COUNT 0x9060 /* (ro) PCS packet counter */ #define PCS_PACKET_COUNT_TX 0x000007FF /* pkts xmitted by PCS */ #define PCS_PACKET_COUNT_RX 0x07FF0000 /* pkts recvd by PCS - whether they + whether they encountered an error or not */ -/** LocalBus Devices. the following provides run-time access to the +/** LocalBus Devices. the following provides run-time access to the * Cassini's PROM ***/ #define REG_EXPANSION_ROM_RUN_START 0x100000 /* expansion rom run time access */ #define REG_EXPANSION_ROM_RUN_END 0x17FFFF -#define REG_SECOND_LOCALBUS_START 0x180000 /* secondary local bus +#define REG_SECOND_LOCALBUS_START 0x180000 /* secondary local bus device */ #define REG_SECOND_LOCALBUS_END 0x1FFFFF @@ -2103,7 +2103,7 @@ #define CAS_MII_1000_EXTEND 0x0F #define CAS_BMSR_1000_EXTEND 0x0100 /* supports 1000Base-T extended status */ -/* +/* * if autoneg is disabled, here's the table: * BMCR_SPEED100 = 100Mbps * BMCR_SPEED1000 = 1000Mbps @@ -2145,7 +2145,7 @@ typedef struct cas_hp_inst { u8 outenab; /* output enable: 0 = not, 1 = if match 2 = if !match, 3 = always */ u8 outshift; /* barrel shift right, 4 bits */ - u16 outmask; + u16 outmask; } cas_hp_inst_t; /* comparison */ @@ -2232,9 +2232,9 @@ typedef struct cas_hp_inst { #ifdef USE_HP_IP46TCP4 static cas_hp_inst_t cas_prog_ip46tcp4tab[] = { - CAS_PROG_IP46TCP4_PREAMBLE, - { "TCP seq", /* DADDR should point to dest port */ - 0x0000, 0x0000, OP_EQ, 0, S1_TCPFG, 4, S1_TCPFG, LD_SEQ, + CAS_PROG_IP46TCP4_PREAMBLE, + { "TCP seq", /* DADDR should point to dest port */ + 0x0000, 0x0000, OP_EQ, 0, S1_TCPFG, 4, S1_TCPFG, LD_SEQ, 0x081, 3, 0x0, 0xffff}, /* Load TCP seq # */ { "TCP control flags", 0x0000, 0x0000, OP_EQ, 0, S1_TCPHL, 0, S1_TCPHL, ST_FLG, 0x045, 3, 0x0, 0x002f}, /* Load TCP flags */ @@ -2263,7 +2263,7 @@ static cas_hp_inst_t cas_prog_ip46tcp4tab[] = { static cas_hp_inst_t cas_prog_ip46tcp4nohttptab[] = { CAS_PROG_IP46TCP4_PREAMBLE, { "TCP seq", /* DADDR should point to dest port */ - 0xFFFF, 0x0080, OP_EQ, 0, S2_HTTP, 0, S1_TCPFG, LD_SEQ, + 0xFFFF, 0x0080, OP_EQ, 0, S2_HTTP, 0, S1_TCPFG, LD_SEQ, 0x081, 3, 0x0, 0xffff} , /* Load TCP seq # */ { "TCP control flags", 0xFFFF, 0x8080, OP_EQ, 0, S2_HTTP, 0, S1_TCPHL, ST_FLG, 0x145, 2, 0x0, 0x002f, }, /* Load TCP flags */ @@ -2328,7 +2328,7 @@ static cas_hp_inst_t cas_prog_ip4fragtab[] = { { "TCP seq", /* DADDR should point to dest port */ 0x0000, 0x0000, OP_EQ, 0, S3_TCPFG, 4, S3_TCPFG, LD_SEQ, 0x081, 3, 0x0, 0xffff}, /* Load TCP seq # */ - { "TCP control flags", 0x0000, 0x0000, OP_EQ, 0, S3_TCPHL, 0, + { "TCP control flags", 0x0000, 0x0000, OP_EQ, 0, S3_TCPHL, 0, S3_TCPHL, ST_FLG, 0x045, 3, 0x0, 0x002f}, /* Load TCP flags */ { "TCP length", 0x0000, 0x0000, OP_EQ, 0, S3_TCPHc, 0, S3_TCPHc, LD_R1, 0x205, 3, 0xB, 0xf000}, @@ -2338,7 +2338,7 @@ static cas_hp_inst_t cas_prog_ip4fragtab[] = { LD_FID, 0x103, 3, 0x0, 0xffff}, /* FID IP4 src+dst */ { "IP4 frag offset", 0x0000, 0x0000, OP_EQ, 0, S3_FOFF, 0, S3_FOFF, LD_SEQ, 0x040, 1, 0xD, 0xfff8}, - { "Cleanup", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT, + { "Cleanup", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT, IM_CTL, 0x001, 3, 0x0, 0x0001}, { NULL }, }; @@ -2356,11 +2356,11 @@ static cas_hp_inst_t cas_prog_ip46tcp4batchtab[] = { { "TCP seq", /* DADDR should point to dest port */ 0x0000, 0x0000, OP_EQ, 0, S1_TCPFG, 0, S1_TCPFG, LD_SEQ, 0x081, 3, 0x0, 0xffff}, /* Load TCP seq # */ - { "TCP control flags", 0x0000, 0x0000, OP_EQ, 0, S1_TCPHL, 0, + { "TCP control flags", 0x0000, 0x0000, OP_EQ, 0, S1_TCPHL, 0, S1_TCPHL, ST_FLG, 0x000, 3, 0x0, 0x0000}, /* Load TCP flags */ - { "TCP length", 0x0000, 0x0000, OP_EQ, 0, S1_TCPHc, 0, + { "TCP length", 0x0000, 0x0000, OP_EQ, 0, S1_TCPHc, 0, S1_TCPHc, LD_R1, 0x205, 3, 0xB, 0xf000}, - { "TCP length cont", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, + { "TCP length cont", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT, IM_CTL, 0x040, 3, 0x0, 0xffff}, /* set batch bit */ { "Cleanup", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT, IM_CTL, 0x001, 3, 0x0, 0x0001}, @@ -2381,7 +2381,7 @@ static cas_hp_inst_t cas_prog_ip46tcp4batchtab[] = { static cas_hp_inst_t cas_prog_workaroundtab[] = { { "packet arrival?", 0xffff, 0x0000, OP_NP, 6, S1_VLAN, 0, S1_PCKT, CL_REG, 0x3ff, 1, 0x0, 0x0000} , - { "VLAN?", 0xffff, 0x8100, OP_EQ, 1, S1_CFI, 0, S1_8023, + { "VLAN?", 0xffff, 0x8100, OP_EQ, 1, S1_CFI, 0, S1_8023, IM_CTL, 0x04a, 3, 0x0, 0xffff}, { "CFI?", 0x1000, 0x1000, OP_EQ, 0, S1_CLNP, 1, S1_8023, CL_REG, 0x000, 0, 0x0, 0x0000}, @@ -2395,7 +2395,7 @@ static cas_hp_inst_t cas_prog_workaroundtab[] = { IM_SAP, 0x6AE, 3, 0x0, 0xffff}, { "IPV4 cont?", 0xff00, 0x4500, OP_EQ, 3, S1_IPV4F, 0, S1_CLNP, LD_SUM, 0x00a, 1, 0x0, 0x0000}, - { "IPV4 frag?", 0x3fff, 0x0000, OP_EQ, 1, S1_TCP44, 0, S1_CLNP, + { "IPV4 frag?", 0x3fff, 0x0000, OP_EQ, 1, S1_TCP44, 0, S1_CLNP, LD_LEN, 0x03e, 1, 0x0, 0xffff}, { "TCP44?", 0x00ff, 0x0006, OP_EQ, 7, S1_TCPSQ, 0, S1_CLNP, LD_FID, 0x182, 3, 0x0, 0xffff}, /* FID IP4&TCP src+dst */ @@ -2408,7 +2408,7 @@ static cas_hp_inst_t cas_prog_workaroundtab[] = { { "TCP64?", 0xff00, 0x0600, OP_EQ, 18, S1_TCPSQ, 0, S1_CLNP, LD_LEN, 0x03f, 1, 0x0, 0xffff}, { "TCP seq", /* DADDR should point to dest port */ - 0x0000, 0x0000, OP_EQ, 0, S1_TCPFG, 4, S1_TCPFG, LD_SEQ, + 0x0000, 0x0000, OP_EQ, 0, S1_TCPFG, 4, S1_TCPFG, LD_SEQ, 0x081, 3, 0x0, 0xffff}, /* Load TCP seq # */ { "TCP control flags", 0x0000, 0x0000, OP_EQ, 0, S1_TCPHL, 0, S1_TCPHL, ST_FLG, 0x045, 3, 0x0, 0x002f}, /* Load TCP flags */ @@ -2429,7 +2429,7 @@ static cas_hp_inst_t cas_prog_workaroundtab[] = { #ifdef USE_HP_ENCRYPT static cas_hp_inst_t cas_prog_encryptiontab[] = { - { "packet arrival?", 0xffff, 0x0000, OP_NP, 6, S1_VLAN, 0, + { "packet arrival?", 0xffff, 0x0000, OP_NP, 6, S1_VLAN, 0, S1_PCKT, CL_REG, 0x3ff, 1, 0x0, 0x0000}, { "VLAN?", 0xffff, 0x8100, OP_EQ, 1, S1_CFI, 0, S1_8023, IM_CTL, 0x00a, 3, 0x0, 0xffff}, @@ -2439,19 +2439,19 @@ static cas_hp_inst_t cas_prog_encryptiontab[] = { 00, #endif { "CFI?", /* FIND CFI and If FIND go to CleanUP1 (ignore and send to host) */ - 0x1000, 0x1000, OP_EQ, 0, S1_CLNP, 1, S1_8023, + 0x1000, 0x1000, OP_EQ, 0, S1_CLNP, 1, S1_8023, CL_REG, 0x000, 0, 0x0, 0x0000}, - { "8023?", 0xffff, 0x0600, OP_LT, 1, S1_LLC, 0, S1_IPV4, + { "8023?", 0xffff, 0x0600, OP_LT, 1, S1_LLC, 0, S1_IPV4, CL_REG, 0x000, 0, 0x0, 0x0000}, - { "LLC?", 0xffff, 0xaaaa, OP_EQ, 1, S1_LLCc, 0, S1_CLNP, + { "LLC?", 0xffff, 0xaaaa, OP_EQ, 1, S1_LLCc, 0, S1_CLNP, CL_REG, 0x000, 0, 0x0, 0x0000}, { "LLCc?", 0xff00, 0x0300, OP_EQ, 2, S1_IPV4, 0, S1_CLNP, CL_REG, 0x000, 0, 0x0, 0x0000}, - { "IPV4?", 0xffff, 0x0800, OP_EQ, 1, S1_IPV4c, 0, S1_IPV6, + { "IPV4?", 0xffff, 0x0800, OP_EQ, 1, S1_IPV4c, 0, S1_IPV6, LD_SAP, 0x100, 3, 0x0, 0xffff}, - { "IPV4 cont?", 0xff00, 0x4500, OP_EQ, 3, S1_IPV4F, 0, S1_CLNP, + { "IPV4 cont?", 0xff00, 0x4500, OP_EQ, 3, S1_IPV4F, 0, S1_CLNP, LD_SUM, 0x00a, 1, 0x0, 0x0000}, - { "IPV4 frag?", 0x3fff, 0x0000, OP_EQ, 1, S1_TCP44, 0, S1_CLNP, + { "IPV4 frag?", 0x3fff, 0x0000, OP_EQ, 1, S1_TCP44, 0, S1_CLNP, LD_LEN, 0x03e, 1, 0x0, 0xffff}, { "TCP44?", 0x00ff, 0x0006, OP_EQ, 7, S1_TCPSQ, 0, S1_ESP4, LD_FID, 0x182, 1, 0x0, 0xffff}, /* FID IP4&TCP src+dst */ @@ -2459,9 +2459,9 @@ static cas_hp_inst_t cas_prog_encryptiontab[] = { LD_SUM, 0x015, 1, 0x0, 0x0000}, { "IPV6 len", 0xf000, 0x6000, OP_EQ, 0, S1_IPV6c, 0, S1_CLNP, IM_R1, 0x128, 1, 0x0, 0xffff}, - { "IPV6 cont?", 0x0000, 0x0000, OP_EQ, 3, S1_TCP64, 0, S1_CLNP, + { "IPV6 cont?", 0x0000, 0x0000, OP_EQ, 3, S1_TCP64, 0, S1_CLNP, LD_FID, 0x484, 1, 0x0, 0xffff}, /* FID IP6&TCP src+dst */ - { "TCP64?", + { "TCP64?", #if 0 //@@@0xff00, 0x0600, OP_EQ, 18, S1_TCPSQ, 0, S1_ESP6, LD_LEN, 0x03f, 1, 0x0, 0xffff, #endif @@ -2472,10 +2472,10 @@ static cas_hp_inst_t cas_prog_encryptiontab[] = { 0x081, 3, 0x0, 0xffff}, /* Load TCP seq # */ { "TCP control flags", 0xFFFF, 0x8080, OP_EQ, 0, S2_HTTP, 0, S1_TCPHL, ST_FLG, 0x145, 2, 0x0, 0x002f}, /* Load TCP flags */ - { "TCP length", 0x0000, 0x0000, OP_EQ, 0, S1_TCPHc, 0, S1_TCPHc, + { "TCP length", 0x0000, 0x0000, OP_EQ, 0, S1_TCPHc, 0, S1_TCPHc, LD_R1, 0x205, 3, 0xB, 0xf000} , { "TCP length cont", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, - S1_PCKT, LD_HDR, 0x0ff, 3, 0x0, 0xffff}, + S1_PCKT, LD_HDR, 0x0ff, 3, 0x0, 0xffff}, { "Cleanup", 0x0000, 0x0000, OP_EQ, 0, S1_CLNP2, 0, S1_CLNP2, IM_CTL, 0x001, 3, 0x0, 0x0001}, { "Cleanup 2", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT, @@ -2483,7 +2483,7 @@ static cas_hp_inst_t cas_prog_encryptiontab[] = { { "Drop packet", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT, IM_CTL, 0x080, 3, 0x0, 0xffff}, { "No HTTP", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT, - IM_CTL, 0x044, 3, 0x0, 0xffff}, + IM_CTL, 0x044, 3, 0x0, 0xffff}, { "IPV4 ESP encrypted?", /* S1_ESP4 */ 0x00ff, 0x0032, OP_EQ, 0, S1_CLNP2, 0, S1_AH4, IM_CTL, 0x021, 1, 0x0, 0xffff}, @@ -4044,7 +4044,7 @@ cas_saturn_patch_t cas_saturn_patch[] = { * deal with that, i just allocate rings to create the desired * alignment. here are the constraints: * RX DESC and COMP rings must be 8KB aligned - * TX DESC must be 2KB aligned. + * TX DESC must be 2KB aligned. * if you change the numbers, be cognizant of how the alignment will change * in INIT_BLOCK as well. */ @@ -4095,20 +4095,20 @@ cas_saturn_patch_t cas_saturn_patch[] = { /* min is 2k, but we can't do jumbo frames unless it's at least 8k */ #define CAS_MIN_PAGE_SHIFT 11 /* 2048 */ #define CAS_JUMBO_PAGE_SHIFT 13 /* 8192 */ -#define CAS_MAX_PAGE_SHIFT 14 /* 16384 */ +#define CAS_MAX_PAGE_SHIFT 14 /* 16384 */ #define TX_DESC_BUFLEN_MASK 0x0000000000003FFFULL /* buffer length in bytes. 0 - 9256 */ #define TX_DESC_BUFLEN_SHIFT 0 #define TX_DESC_CSUM_START_MASK 0x00000000001F8000ULL /* checksum start. # - of bytes to be + of bytes to be skipped before csum calc begins. value must be even */ #define TX_DESC_CSUM_START_SHIFT 15 #define TX_DESC_CSUM_STUFF_MASK 0x000000001FE00000ULL /* checksum stuff. - byte offset w/in + byte offset w/in the pkt for the 1st csum byte. must be > 8 */ @@ -4137,7 +4137,7 @@ struct cas_rx_desc { /* received packets are put on the completion ring. */ /* word 1 */ -#define RX_COMP1_DATA_SIZE_MASK 0x0000000007FFE000ULL +#define RX_COMP1_DATA_SIZE_MASK 0x0000000007FFE000ULL #define RX_COMP1_DATA_SIZE_SHIFT 13 #define RX_COMP1_DATA_OFF_MASK 0x000001FFF8000000ULL #define RX_COMP1_DATA_OFF_SHIFT 27 @@ -4147,8 +4147,8 @@ struct cas_rx_desc { #define RX_COMP1_SKIP_SHIFT 55 #define RX_COMP1_RELEASE_NEXT 0x0200000000000000ULL #define RX_COMP1_SPLIT_PKT 0x0400000000000000ULL -#define RX_COMP1_RELEASE_FLOW 0x0800000000000000ULL -#define RX_COMP1_RELEASE_DATA 0x1000000000000000ULL +#define RX_COMP1_RELEASE_FLOW 0x0800000000000000ULL +#define RX_COMP1_RELEASE_DATA 0x1000000000000000ULL #define RX_COMP1_RELEASE_HDR 0x2000000000000000ULL #define RX_COMP1_TYPE_MASK 0xC000000000000000ULL #define RX_COMP1_TYPE_SHIFT 62 @@ -4201,7 +4201,7 @@ struct cas_rx_desc { /* we encode the following: ring/index/release. only 14 bits * are usable. - * NOTE: the encoding is dependent upon RX_DESC_RING_SIZE and + * NOTE: the encoding is dependent upon RX_DESC_RING_SIZE and * MAX_RX_DESC_RINGS. */ #define RX_INDEX_NUM_MASK 0x0000000000000FFFULL #define RX_INDEX_NUM_SHIFT 0 @@ -4214,7 +4214,7 @@ struct cas_rx_comp { u64 word2; u64 word3; u64 word4; -}; +}; enum link_state { link_down = 0, /* No link, will retry */ @@ -4235,9 +4235,9 @@ typedef struct cas_page { /* some alignment constraints: * TX DESC, RX DESC, and RX COMP must each be 8K aligned. - * TX COMPWB must be 8-byte aligned. + * TX COMPWB must be 8-byte aligned. * to accomplish this, here's what we do: - * + * * INIT_BLOCK_RX_COMP = 64k (already aligned) * INIT_BLOCK_RX_DESC = 8k * INIT_BLOCK_TX = 8k @@ -4250,9 +4250,9 @@ typedef struct cas_page { struct cas_init_block { struct cas_rx_comp rxcs[N_RX_COMP_RINGS][INIT_BLOCK_RX_COMP]; - struct cas_rx_desc rxds[N_RX_DESC_RINGS][INIT_BLOCK_RX_DESC]; + struct cas_rx_desc rxds[N_RX_DESC_RINGS][INIT_BLOCK_RX_DESC]; struct cas_tx_desc txds[N_TX_RINGS][INIT_BLOCK_TX]; - u64 tx_compwb; + u64 tx_compwb; }; /* tiny buffers to deal with target abort issue. we allocate a bit @@ -4278,7 +4278,7 @@ struct cas { int tx_new[N_TX_RINGS], tx_old[N_TX_RINGS]; int rx_old[N_RX_DESC_RINGS]; int rx_cur[N_RX_COMP_RINGS], rx_new[N_RX_COMP_RINGS]; - int rx_last[N_RX_DESC_RINGS]; + int rx_last[N_RX_DESC_RINGS]; /* Set when chip is actually in operational state * (ie. not power managed) */ @@ -4337,7 +4337,7 @@ struct cas { int min_frame_size; /* for tx fifo workaround */ /* page size allocation */ - int page_size; + int page_size; int page_order; int mtu_stride; @@ -4362,7 +4362,7 @@ struct cas { #ifdef CONFIG_CASSINI_QGE_DEBUG atomic_t interrupt_seen; /* 1 if any interrupts are getting through */ #endif - + /* Link-down problem workaround */ #define LINK_TRANSITION_UNKNOWN 0 #define LINK_TRANSITION_ON_FAILURE 1 @@ -4383,7 +4383,7 @@ struct cas { int casreg_len; /* reg-space size for dumping */ u64 pause_entered; u16 pause_last_time_recvd; - + dma_addr_t block_dvma, tx_tiny_dvma[N_TX_RINGS]; struct pci_dev *pdev; struct net_device *dev; @@ -4394,7 +4394,7 @@ struct cas { #define RX_COMP_ENTRY(r, x) ((x) & (RX_COMP_RINGN_SIZE(r) - 1)) #define TX_BUFF_COUNT(r, x, y) ((x) <= (y) ? ((y) - (x)) : \ - (TX_DESC_RINGN_SIZE(r) - (x) + (y))) + (TX_DESC_RINGN_SIZE(r) - (x) + (y))) #define TX_BUFFS_AVAIL(cp, i) ((cp)->tx_old[(i)] <= (cp)->tx_new[(i)] ? \ (cp)->tx_old[(i)] + (TX_DESC_RINGN_SIZE(i) - 1) - (cp)->tx_new[(i)] : \ |