[PATCH] A new 10GB Ethernet Driver by Chelsio Communications

A Linux driver for the Chelsio 10Gb Ethernet Network Controller by Chelsio
(http://www.chelsio.com).  This driver supports the Chelsio N210 NIC and is
backward compatible with the Chelsio N110 model 10Gb NICs.  It supports
AMD64, EM64T and x86 systems.

Signed-off-by: Tina Yang <tinay@chelsio.com>
Signed-off-by: Scott Bardone <sbardone@chelsio.com>
Signed-off-by: Christoph Lameter <christoph@lameter.com>

Adrian said:

- my3126.c is unused (because t1_my3126_ops isn't used anywhere)
- what are the EXTRA_CFLAGS in drivers/net/chelsio/Makefile for?
- $(cxgb-y) in drivers/net/chelsio/Makefile seems to be unneeded
- completely unused global functions:
  - espi.c: t1_espi_get_intr_counts
  - sge.c: t1_sge_get_intr_counts
- the following functions can be made static:
  - sge.c: t1_espi_workaround
  - sge.c: t1_sge_tx
  - subr.c: __t1_tpi_read
  - subr.c: __t1_tpi_write
  - subr.c: t1_wait_op_done

shemminger said:

The performance recommendations in cxgb.txt are common to all fast devices,
and should be in one file rather than just for this device. I would rather
see ip-sysctl.txt updated or a new file on tuning recommendations started.
Some of them have consequences that aren't documented well.
For example, turning off TCP timestamps risks data corruption from sequence wrap.

A new driver shouldn't need so may #ifdef's unless you want to putit on older
vendor versions of 2.4

Some accessor and wrapper functions like:
        t1_pci_read_config_4
        adapter_name
        t1_malloc
are just annoying noise.

Why have useless dead code like:

/* Interrupt handler */
+static int pm3393_interrupt_handler(struct cmac *cmac)
+{
+       u32 master_intr_status;
+/*
+    1. Read master interrupt register.
+    2. Read BLOCK's interrupt status registers.
+    3. Handle BLOCK interrupts.
+*/

Jeff said:

step 1:  kill all the OS wrappers.

 And do you really need hooks for multiple MACs, when only one MAC is
 really supported?  Typically these hooks are at a higher level anyway --
 struct net_device.

From: Christoph Lameter <christoph@lameter

Driver modified as suggested by Pekka Enberg, Stephen Hemminger and Andrian
Bunk.  Reduces the size of the driver to ~260k.

- clean up tabs
- removed my3126.c
- removed 85% of suni1x10gexp_regs.h
- removed 80% of regs.h
- removed various calls, renamed variables/functions.
- removed system specific and other wrappers (usleep, msleep)
- removed dead code
- dropped redundant casts in osdep.h
- dropped redundant check of kfree
- dropped weird code (MODVERSIONS stuff)
- reduced number of #ifdefs
- use kcalloc now instead of kmalloc
- Add information about known issues with the driver
- Add information about authors

Signed-off-by: Scott Bardone <sbardone@chelsio.com>
Signed-off-by: Christoph Lameter <christoph@lameter.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>

diff -puN /dev/null Documentation/networking/cxgb.txt

1 files changed, 258 insertions, 0 deletions

diff --git a/drivers/net/chelsio/mv88x201x.c b/drivers/net/chelsio/mv88x201x.c
new file mode 100644
index 00000000000..f54133af1bc
--- /dev/null
+++ b/drivers/net/chelsio/mv88x201x.c
@@ -0,0 +1,258 @@
+/*****************************************************************************
+ *                                                                           *
+ * File: mv88x201x.c                                                         *
+ * $Revision: 1.7 $                                                          *
+ * $Date: 2005/03/23 07:15:59 $                                              *
+ * Description:                                                              *
+ *  Marvell PHY (mv88x201x) functionality.                                   *
+ *  part of the Chelsio 10Gb Ethernet Driver.                                *
+ *                                                                           *
+ * This program is free software; you can redistribute it and/or modify      *
+ * it under the terms of the GNU General Public License, version 2, as       *
+ * published by the Free Software Foundation.                                *
+ *                                                                           *
+ * You should have received a copy of the GNU General Public License along   *
+ * with this program; if not, write to the Free Software Foundation, Inc.,   *
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.                 *
+ *                                                                           *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED    *
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF      *
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.                     *
+ *                                                                           *
+ * http://www.chelsio.com                                                    *
+ *                                                                           *
+ * Copyright (c) 2003 - 2005 Chelsio Communications, Inc.                    *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * Maintainers: maintainers@chelsio.com                                      *
+ *                                                                           *
+ * Authors: Dimitrios Michailidis   <dm@chelsio.com>                         *
+ *          Tina Yang               <tainay@chelsio.com>                     *
+ *          Felix Marti             <felix@chelsio.com>                      *
+ *          Scott Bardone           <sbardone@chelsio.com>                   *
+ *          Kurt Ottaway            <kottaway@chelsio.com>                   *
+ *          Frank DiMambro          <frank@chelsio.com>                      *
+ *                                                                           *
+ * History:                                                                  *
+ *                                                                           *
+ ****************************************************************************/
+
+#include "cphy.h"
+#include "elmer0.h"
+
+/*
+ * The 88x2010 Rev C. requires some link status registers * to be read
+ * twice in order to get the right values. Future * revisions will fix
+ * this problem and then this macro * can disappear.
+ */
+#define MV88x2010_LINK_STATUS_BUGS    1
+
+static int led_init(struct cphy *cphy)
+{
+	/* Setup the LED registers so we can turn on/off.
+	 * Writing these bits maps control to another
+	 * register. mmd(0x1) addr(0x7)
+	 */
+	mdio_write(cphy, 0x3, 0x8304, 0xdddd);
+	return 0;
+}
+
+static int led_link(struct cphy *cphy, u32 do_enable)
+{
+	u32 led = 0;
+#define LINK_ENABLE_BIT 0x1
+
+	mdio_read(cphy, 0x1, 0x7, &led);
+
+	if (do_enable & LINK_ENABLE_BIT) {
+		led |= LINK_ENABLE_BIT;
+		mdio_write(cphy, 0x1, 0x7, led);
+	} else {
+		led &= ~LINK_ENABLE_BIT;
+		mdio_write(cphy, 0x1, 0x7, led);
+	}
+	return 0;
+}
+
+/* Port Reset */
+static int mv88x201x_reset(struct cphy *cphy, int wait)
+{
+	/* This can be done through registers.  It is not required since
+	 * a full chip reset is used.
+	 */
+	return 0;
+}
+
+static int mv88x201x_interrupt_enable(struct cphy *cphy)
+{
+	/* Enable PHY LASI interrupts. */
+	mdio_write(cphy, 0x1, 0x9002, 0x1);
+
+	/* Enable Marvell interrupts through Elmer0. */
+	if (t1_is_asic(cphy->adapter)) {
+		u32 elmer;
+
+		t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
+		elmer |= ELMER0_GP_BIT6;
+		t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
+	}
+	return 0;
+}
+
+static int mv88x201x_interrupt_disable(struct cphy *cphy)
+{
+	/* Disable PHY LASI interrupts. */
+	mdio_write(cphy, 0x1, 0x9002, 0x0);
+
+	/* Disable Marvell interrupts through Elmer0. */
+	if (t1_is_asic(cphy->adapter)) {
+		u32 elmer;
+
+		t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
+		elmer &= ~ELMER0_GP_BIT6;
+		t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
+	}
+	return 0;
+}
+
+static int mv88x201x_interrupt_clear(struct cphy *cphy)
+{
+	u32 elmer;
+	u32 val;
+
+#ifdef MV88x2010_LINK_STATUS_BUGS
+	/* Required to read twice before clear takes affect. */
+	mdio_read(cphy, 0x1, 0x9003, &val);
+	mdio_read(cphy, 0x1, 0x9004, &val);
+	mdio_read(cphy, 0x1, 0x9005, &val);
+
+	/* Read this register after the others above it else
+	 * the register doesn't clear correctly.
+	 */
+	mdio_read(cphy, 0x1, 0x1, &val);
+#endif
+
+	/* Clear link status. */
+	mdio_read(cphy, 0x1, 0x1, &val);
+	/* Clear PHY LASI interrupts. */
+	mdio_read(cphy, 0x1, 0x9005, &val);
+
+#ifdef MV88x2010_LINK_STATUS_BUGS
+	/* Do it again. */
+	mdio_read(cphy, 0x1, 0x9003, &val);
+	mdio_read(cphy, 0x1, 0x9004, &val);
+#endif
+
+	/* Clear Marvell interrupts through Elmer0. */
+	if (t1_is_asic(cphy->adapter)) {
+		t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer);
+		elmer |= ELMER0_GP_BIT6;
+		t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer);
+	}
+	return 0;
+}
+
+static int mv88x201x_interrupt_handler(struct cphy *cphy)
+{
+	/* Clear interrupts */
+	mv88x201x_interrupt_clear(cphy);
+
+	/* We have only enabled link change interrupts and so
+	 * cphy_cause must be a link change interrupt.
+	 */
+	return cphy_cause_link_change;
+}
+
+static int mv88x201x_set_loopback(struct cphy *cphy, int on)
+{
+	return 0;
+}
+
+static int mv88x201x_get_link_status(struct cphy *cphy, int *link_ok,
+				     int *speed, int *duplex, int *fc)
+{
+	u32 val = 0;
+#define LINK_STATUS_BIT 0x4
+
+	if (link_ok) {
+		/* Read link status. */
+		mdio_read(cphy, 0x1, 0x1, &val);
+		val &= LINK_STATUS_BIT;
+		*link_ok = (val == LINK_STATUS_BIT);
+		/* Turn on/off Link LED */
+		led_link(cphy, *link_ok);
+	}
+	if (speed)
+		*speed = SPEED_10000;
+	if (duplex)
+		*duplex = DUPLEX_FULL;
+	if (fc)
+		*fc = PAUSE_RX | PAUSE_TX;
+	return 0;
+}
+
+static void mv88x201x_destroy(struct cphy *cphy)
+{
+	kfree(cphy);
+}
+
+static struct cphy_ops mv88x201x_ops = {
+	.destroy           = mv88x201x_destroy,
+	.reset             = mv88x201x_reset,
+	.interrupt_enable  = mv88x201x_interrupt_enable,
+	.interrupt_disable = mv88x201x_interrupt_disable,
+	.interrupt_clear   = mv88x201x_interrupt_clear,
+	.interrupt_handler = mv88x201x_interrupt_handler,
+	.get_link_status   = mv88x201x_get_link_status,
+	.set_loopback      = mv88x201x_set_loopback,
+};
+
+static struct cphy *mv88x201x_phy_create(adapter_t *adapter, int phy_addr,
+					 struct mdio_ops *mdio_ops)
+{
+	u32 val;
+	struct cphy *cphy = kmalloc(sizeof(*cphy), GFP_KERNEL);
+
+	if (!cphy)
+		return NULL;
+	memset(cphy, 0, sizeof(*cphy));
+	cphy_init(cphy, adapter, phy_addr, &mv88x201x_ops, mdio_ops);
+
+	/* Commands the PHY to enable XFP's clock. */
+	mdio_read(cphy, 0x3, 0x8300, &val);
+	mdio_write(cphy, 0x3, 0x8300, val | 1);
+
+	/* Clear link status. Required because of a bug in the PHY.  */
+	mdio_read(cphy, 0x1, 0x8, &val);
+	mdio_read(cphy, 0x3, 0x8, &val);
+
+	/* Allows for Link,Ack LED turn on/off */
+	led_init(cphy);
+	return cphy;
+}
+
+/* Chip Reset */
+static int mv88x201x_phy_reset(adapter_t *adapter)
+{
+	u32 val;
+
+	t1_tpi_read(adapter, A_ELMER0_GPO, &val);
+	val &= ~4;
+	t1_tpi_write(adapter, A_ELMER0_GPO, val);
+	msleep(100);
+
+	t1_tpi_write(adapter, A_ELMER0_GPO, val | 4);
+	msleep(1000);
+
+	/* Now lets enable the Laser. Delay 100us */
+	t1_tpi_read(adapter, A_ELMER0_GPO, &val);
+	val |= 0x8000;
+	t1_tpi_write(adapter, A_ELMER0_GPO, val);
+	udelay(100);
+	return 0;
+}
+
+struct gphy t1_mv88x201x_ops = {
+	mv88x201x_phy_create,
+	mv88x201x_phy_reset
+};