[PATCH] chelsio: add 1G swcixw aupport

Add support for 1G versions of Chelsio devices.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 368 insertions, 0 deletions

diff --git a/drivers/net/chelsio/vsc8244.c b/drivers/net/chelsio/vsc8244.c
new file mode 100644
index 00000000000..c493e783d45
--- /dev/null
+++ b/drivers/net/chelsio/vsc8244.c
@@ -0,0 +1,368 @@
+/*
+ * This file is part of the Chelsio T2 Ethernet driver.
+ *
+ * Copyright (C) 2005 Chelsio Communications.  All rights reserved.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the LICENSE file included in this
+ * release for licensing terms and conditions.
+ */
+
+#include "common.h"
+#include "cphy.h"
+#include "elmer0.h"
+
+#ifndef ADVERTISE_PAUSE_CAP
+# define ADVERTISE_PAUSE_CAP 0x400
+#endif
+#ifndef ADVERTISE_PAUSE_ASYM
+# define ADVERTISE_PAUSE_ASYM 0x800
+#endif
+
+/* Gigabit MII registers */
+#ifndef MII_CTRL1000
+# define MII_CTRL1000 9
+#endif
+
+#ifndef ADVERTISE_1000FULL
+# define ADVERTISE_1000FULL 0x200
+# define ADVERTISE_1000HALF 0x100
+#endif
+
+/* VSC8244 PHY specific registers. */
+enum {
+	VSC8244_INTR_ENABLE   = 25,
+	VSC8244_INTR_STATUS   = 26,
+	VSC8244_AUX_CTRL_STAT = 28,
+};
+
+enum {
+	VSC_INTR_RX_ERR     = 1 << 0,
+	VSC_INTR_MS_ERR     = 1 << 1,  /* master/slave resolution error */
+	VSC_INTR_CABLE      = 1 << 2,  /* cable impairment */
+	VSC_INTR_FALSE_CARR = 1 << 3,  /* false carrier */
+	VSC_INTR_MEDIA_CHG  = 1 << 4,  /* AMS media change */
+	VSC_INTR_RX_FIFO    = 1 << 5,  /* Rx FIFO over/underflow */
+	VSC_INTR_TX_FIFO    = 1 << 6,  /* Tx FIFO over/underflow */
+	VSC_INTR_DESCRAMBL  = 1 << 7,  /* descrambler lock-lost */
+	VSC_INTR_SYMBOL_ERR = 1 << 8,  /* symbol error */
+	VSC_INTR_NEG_DONE   = 1 << 10, /* autoneg done */
+	VSC_INTR_NEG_ERR    = 1 << 11, /* autoneg error */
+	VSC_INTR_LINK_CHG   = 1 << 13, /* link change */
+	VSC_INTR_ENABLE     = 1 << 15, /* interrupt enable */
+};
+
+#define CFG_CHG_INTR_MASK (VSC_INTR_LINK_CHG | VSC_INTR_NEG_ERR | \
+	 		   VSC_INTR_NEG_DONE)
+#define INTR_MASK (CFG_CHG_INTR_MASK | VSC_INTR_TX_FIFO | VSC_INTR_RX_FIFO | \
+		   VSC_INTR_ENABLE)
+
+/* PHY specific auxiliary control & status register fields */
+#define S_ACSR_ACTIPHY_TMR    0
+#define M_ACSR_ACTIPHY_TMR    0x3
+#define V_ACSR_ACTIPHY_TMR(x) ((x) << S_ACSR_ACTIPHY_TMR)
+
+#define S_ACSR_SPEED    3
+#define M_ACSR_SPEED    0x3
+#define G_ACSR_SPEED(x) (((x) >> S_ACSR_SPEED) & M_ACSR_SPEED)
+
+#define S_ACSR_DUPLEX 5
+#define F_ACSR_DUPLEX (1 << S_ACSR_DUPLEX)
+
+#define S_ACSR_ACTIPHY 6
+#define F_ACSR_ACTIPHY (1 << S_ACSR_ACTIPHY)
+
+/*
+ * Reset the PHY.  This PHY completes reset immediately so we never wait.
+ */
+static int vsc8244_reset(struct cphy *cphy, int wait)
+{
+	int err;
+	unsigned int ctl;
+
+	err = simple_mdio_read(cphy, MII_BMCR, &ctl);
+	if (err)
+		return err;
+
+	ctl &= ~BMCR_PDOWN;
+	ctl |= BMCR_RESET;
+	return simple_mdio_write(cphy, MII_BMCR, ctl);
+}
+
+static int vsc8244_intr_enable(struct cphy *cphy)
+{
+	simple_mdio_write(cphy, VSC8244_INTR_ENABLE, INTR_MASK);
+
+    /* Enable interrupts through Elmer */
+	if (t1_is_asic(cphy->adapter)) {
+		u32 elmer;
+
+		t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
+		elmer |= ELMER0_GP_BIT1;
+		if (is_T2(cphy->adapter)) {
+		    elmer |= ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4;
+                }
+		t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
+	}
+
+    return 0;
+}
+
+static int vsc8244_intr_disable(struct cphy *cphy)
+{
+	simple_mdio_write(cphy, VSC8244_INTR_ENABLE, 0);
+
+	if (t1_is_asic(cphy->adapter)) {
+		u32 elmer;
+
+		t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
+		elmer &= ~ELMER0_GP_BIT1;
+		if (is_T2(cphy->adapter)) {
+		    elmer &= ~(ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4);
+                }
+		t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
+	}
+
+    return 0;
+}
+
+static int vsc8244_intr_clear(struct cphy *cphy)
+{
+	u32 val;
+    u32 elmer;
+
+	/* Clear PHY interrupts by reading the register. */
+	simple_mdio_read(cphy, VSC8244_INTR_ENABLE, &val);
+
+	if (t1_is_asic(cphy->adapter)) {
+		t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer);
+		elmer |= ELMER0_GP_BIT1;
+		if (is_T2(cphy->adapter)) {
+		    elmer |= ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4;
+                }
+		t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer);
+	}
+
+    return 0;
+}
+
+/*
+ * Force the PHY speed and duplex.  This also disables auto-negotiation, except
+ * for 1Gb/s, where auto-negotiation is mandatory.
+ */
+static int vsc8244_set_speed_duplex(struct cphy *phy, int speed, int duplex)
+{
+	int err;
+	unsigned int ctl;
+
+	err = simple_mdio_read(phy, MII_BMCR, &ctl);
+	if (err)
+		return err;
+
+	if (speed >= 0) {
+		ctl &= ~(BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE);
+		if (speed == SPEED_100)
+			ctl |= BMCR_SPEED100;
+		else if (speed == SPEED_1000)
+			ctl |= BMCR_SPEED1000;
+	}
+	if (duplex >= 0) {
+		ctl &= ~(BMCR_FULLDPLX | BMCR_ANENABLE);
+		if (duplex == DUPLEX_FULL)
+			ctl |= BMCR_FULLDPLX;
+	}
+	if (ctl & BMCR_SPEED1000)  /* auto-negotiation required for 1Gb/s */
+		ctl |= BMCR_ANENABLE;
+	return simple_mdio_write(phy, MII_BMCR, ctl);
+}
+
+int t1_mdio_set_bits(struct cphy *phy, int mmd, int reg, unsigned int bits)
+{
+    int ret;
+    unsigned int val;
+
+    ret = mdio_read(phy, mmd, reg, &val);
+    if (!ret)
+        ret = mdio_write(phy, mmd, reg, val | bits);
+    return ret;
+}
+
+static int vsc8244_autoneg_enable(struct cphy *cphy)
+{
+	return t1_mdio_set_bits(cphy, 0, MII_BMCR,
+				BMCR_ANENABLE | BMCR_ANRESTART);
+}
+
+static int vsc8244_autoneg_restart(struct cphy *cphy)
+{
+	return t1_mdio_set_bits(cphy, 0, MII_BMCR, BMCR_ANRESTART);
+}
+
+static int vsc8244_advertise(struct cphy *phy, unsigned int advertise_map)
+{
+	int err;
+	unsigned int val = 0;
+
+	err = simple_mdio_read(phy, MII_CTRL1000, &val);
+	if (err)
+		return err;
+
+	val &= ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL);
+	if (advertise_map & ADVERTISED_1000baseT_Half)
+		val |= ADVERTISE_1000HALF;
+	if (advertise_map & ADVERTISED_1000baseT_Full)
+		val |= ADVERTISE_1000FULL;
+
+	err = simple_mdio_write(phy, MII_CTRL1000, val);
+	if (err)
+		return err;
+
+	val = 1;
+	if (advertise_map & ADVERTISED_10baseT_Half)
+		val |= ADVERTISE_10HALF;
+	if (advertise_map & ADVERTISED_10baseT_Full)
+		val |= ADVERTISE_10FULL;
+	if (advertise_map & ADVERTISED_100baseT_Half)
+		val |= ADVERTISE_100HALF;
+	if (advertise_map & ADVERTISED_100baseT_Full)
+		val |= ADVERTISE_100FULL;
+	if (advertise_map & ADVERTISED_PAUSE)
+		val |= ADVERTISE_PAUSE_CAP;
+	if (advertise_map & ADVERTISED_ASYM_PAUSE)
+		val |= ADVERTISE_PAUSE_ASYM;
+	return simple_mdio_write(phy, MII_ADVERTISE, val);
+}
+
+static int vsc8244_get_link_status(struct cphy *cphy, int *link_ok,
+				     int *speed, int *duplex, int *fc)
+{
+	unsigned int bmcr, status, lpa, adv;
+	int err, sp = -1, dplx = -1, pause = 0;
+
+	err = simple_mdio_read(cphy, MII_BMCR, &bmcr);
+	if (!err)
+		err = simple_mdio_read(cphy, MII_BMSR, &status);
+	if (err)
+		return err;
+
+	if (link_ok) {
+		/*
+		 * BMSR_LSTATUS is latch-low, so if it is 0 we need to read it
+		 * once more to get the current link state.
+		 */
+		if (!(status & BMSR_LSTATUS))
+			err = simple_mdio_read(cphy, MII_BMSR, &status);
+		if (err)
+			return err;
+		*link_ok = (status & BMSR_LSTATUS) != 0;
+	}
+	if (!(bmcr & BMCR_ANENABLE)) {
+		dplx = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;
+		if (bmcr & BMCR_SPEED1000)
+			sp = SPEED_1000;
+		else if (bmcr & BMCR_SPEED100)
+			sp = SPEED_100;
+		else
+			sp = SPEED_10;
+	} else if (status & BMSR_ANEGCOMPLETE) {
+		err = simple_mdio_read(cphy, VSC8244_AUX_CTRL_STAT, &status);
+		if (err)
+			return err;
+
+		dplx = (status & F_ACSR_DUPLEX) ? DUPLEX_FULL : DUPLEX_HALF;
+		sp = G_ACSR_SPEED(status);
+		if (sp == 0)
+			sp = SPEED_10;
+		else if (sp == 1)
+			sp = SPEED_100;
+		else
+			sp = SPEED_1000;
+
+		if (fc && dplx == DUPLEX_FULL) {
+			err = simple_mdio_read(cphy, MII_LPA, &lpa);
+			if (!err)
+				err = simple_mdio_read(cphy, MII_ADVERTISE,
+						       &adv);
+			if (err)
+				return err;
+
+			if (lpa & adv & ADVERTISE_PAUSE_CAP)
+				pause = PAUSE_RX | PAUSE_TX;
+			else if ((lpa & ADVERTISE_PAUSE_CAP) &&
+				 (lpa & ADVERTISE_PAUSE_ASYM) &&
+				 (adv & ADVERTISE_PAUSE_ASYM))
+				pause = PAUSE_TX;
+			else if ((lpa & ADVERTISE_PAUSE_ASYM) &&
+				 (adv & ADVERTISE_PAUSE_CAP))
+				pause = PAUSE_RX;
+		}
+	}
+	if (speed)
+		*speed = sp;
+	if (duplex)
+		*duplex = dplx;
+	if (fc)
+		*fc = pause;
+	return 0;
+}
+
+static int vsc8244_intr_handler(struct cphy *cphy)
+{
+	unsigned int cause;
+	int err, cphy_cause = 0;
+
+	err = simple_mdio_read(cphy, VSC8244_INTR_STATUS, &cause);
+	if (err)
+		return err;
+
+	cause &= INTR_MASK;
+	if (cause & CFG_CHG_INTR_MASK)
+		cphy_cause |= cphy_cause_link_change;
+	if (cause & (VSC_INTR_RX_FIFO | VSC_INTR_TX_FIFO))
+		cphy_cause |= cphy_cause_fifo_error;
+	return cphy_cause;
+}
+
+static void vsc8244_destroy(struct cphy *cphy)
+{
+	kfree(cphy);
+}
+
+static struct cphy_ops vsc8244_ops = {
+	.destroy              = vsc8244_destroy,
+	.reset                = vsc8244_reset,
+	.interrupt_enable     = vsc8244_intr_enable,
+	.interrupt_disable    = vsc8244_intr_disable,
+	.interrupt_clear      = vsc8244_intr_clear,
+	.interrupt_handler    = vsc8244_intr_handler,
+	.autoneg_enable       = vsc8244_autoneg_enable,
+	.autoneg_restart      = vsc8244_autoneg_restart,
+	.advertise            = vsc8244_advertise,
+	.set_speed_duplex     = vsc8244_set_speed_duplex,
+	.get_link_status      = vsc8244_get_link_status
+};
+
+static struct cphy* vsc8244_phy_create(adapter_t *adapter, int phy_addr, struct mdio_ops *mdio_ops)
+{
+	struct cphy *cphy = kzalloc(sizeof(*cphy), GFP_KERNEL);
+
+	if (!cphy) return NULL;
+
+	cphy_init(cphy, adapter, phy_addr, &vsc8244_ops, mdio_ops);
+
+	return cphy;
+}
+
+
+static int vsc8244_phy_reset(adapter_t* adapter)
+{
+	return 0;
+}
+
+struct gphy t1_vsc8244_ops = {
+	vsc8244_phy_create,
+	vsc8244_phy_reset
+};
+
+