diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/net/dgrs_i82596.h |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/net/dgrs_i82596.h')
-rw-r--r-- | drivers/net/dgrs_i82596.h | 473 |
1 files changed, 473 insertions, 0 deletions
diff --git a/drivers/net/dgrs_i82596.h b/drivers/net/dgrs_i82596.h new file mode 100644 index 00000000000..c7a38c16a00 --- /dev/null +++ b/drivers/net/dgrs_i82596.h @@ -0,0 +1,473 @@ +/* + * i82596 ethernet controller bits and structures (little endian) + * + * $Id: i82596.h,v 1.8 1996/09/03 11:19:03 rick Exp $ + */ + +/************************************************************************/ +/* */ +/* PORT commands (p. 4-20). The least significant nibble is one */ +/* of these commands, the rest of the command is a memory address */ +/* aligned on a 16 byte boundary. Note that port commands must */ +/* be written to the PORT address and the PORT address+2 with two */ +/* halfword writes. Write the LSH first to PORT, then the MSH to */ +/* PORT+2. Blame Intel. */ +/* */ +/************************************************************************/ +#define I596_PORT_RESET 0x0 /* Reset. Wait 5 SysClks & 10 TxClks */ +#define I596_PORT_SELFTEST 0x1 /* Do a selftest */ +#define I596_PORT_SCP_ADDR 0x2 /* Set new SCP address */ +#define I596_PORT_DUMP 0x3 /* Dump internal data structures */ + +/* + * I596_ST: Selftest results (p. 4-21) + */ +typedef volatile struct +{ + ulong signature; /* ROM checksum */ + ulong result; /* Selftest results: non-zero is a failure */ +} I596_ST; + +#define I596_ST_SELFTEST_FAIL 0x1000 /* Selftest Failed */ +#define I596_ST_DIAGNOSE_FAIL 0x0020 /* Diagnose Failed */ +#define I596_ST_BUSTIMER_FAIL 0x0010 /* Bus Timer Failed */ +#define I596_ST_REGISTER_FAIL 0x0008 /* Register Failed */ +#define I596_ST_ROM_FAIL 0x0004 /* ROM Failed */ + +/* + * I596_DUMP: Dump results + */ +typedef volatile struct +{ + ulong dump[77]; +} I596_DUMP; + +/************************************************************************/ +/* */ +/* I596_TBD: Transmit Buffer Descriptor (p. 4-59) */ +/* */ +/************************************************************************/ +typedef volatile struct _I596_TBD +{ + ulong count; + vol struct _I596_TBD *next; + uchar *buf; + ushort unused1; + ushort unused2; +} I596_TBD; + +#define I596_TBD_NOLINK ((I596_TBD *) 0xffffffff) +#define I596_TBD_EOF 0x8000 +#define I596_TBD_COUNT_MASK 0x3fff + +/************************************************************************/ +/* */ +/* I596_TFD: Transmit Frame Descriptor (p. 4-56) */ +/* a.k.a. I596_CB_XMIT */ +/* */ +/************************************************************************/ +typedef volatile struct +{ + ushort status; + ushort cmd; + union _I596_CB *next; + I596_TBD *tbdp; + ulong count; /* for speed */ + + /* Application defined data follows structure... */ + +#if 0 /* We don't use these intel defined ones */ + uchar addr[6]; + ushort len; + uchar data[1]; +#else + ulong dstchan;/* Used by multi-NIC mode */ +#endif +} I596_TFD; + +#define I596_TFD_NOCRC 0x0010 /* cmd: No CRC insertion */ +#define I596_TFD_FLEX 0x0008 /* cmd: Flexible mode */ + +/************************************************************************/ +/* */ +/* I596_RBD: Receive Buffer Descriptor (p. 4-84) */ +/* */ +/************************************************************************/ +typedef volatile struct _I596_RBD +{ +#ifdef INTEL_RETENTIVE + ushort count; /* Length of data in buf */ + ushort offset; +#else + ulong count; /* Length of data in buf */ +#endif + vol struct _I596_RBD *next; /* Next buffer descriptor in list */ + uchar *buf; /* Data buffer */ +#ifdef INTEL_RETENTIVE + ushort size; /* Size of buf (constant) */ + ushort zero; +#else + ulong size; /* Size of buf (constant) */ +#endif + + /* Application defined data follows structure... */ + + uchar chan; + uchar refcnt; + ushort len; +} I596_RBD; + +#define I596_RBD_NOLINK ((I596_RBD *) 0xffffffff) +#define I596_RBD_EOF 0x8000 /* This is last buffer in a frame */ +#define I596_RBD_F 0x4000 /* The actual count is valid */ + +#define I596_RBD_EL 0x8000 /* Last buffer in list */ + +/************************************************************************/ +/* */ +/* I596_RFD: Receive Frame Descriptor (p. 4-79) */ +/* */ +/************************************************************************/ +typedef volatile struct _I596_RFD +{ + ushort status; + ushort cmd; + vol struct _I596_RFD *next; + vol struct _I596_RBD *rbdp; + ushort count; /* Len of data in RFD: always 0 */ + ushort size; /* Size of RFD buffer: always 0 */ + + /* Application defined data follows structure... */ + +# if 0 /* We don't use these intel defined ones */ + uchar addr[6]; + ushort len; + uchar data[1]; +# else + ulong dstchan;/* Used by multi-nic mode */ +# endif +} I596_RFD; + +#define I596_RFD_C 0x8000 /* status: frame complete */ +#define I596_RFD_B 0x4000 /* status: frame busy or waiting */ +#define I596_RFD_OK 0x2000 /* status: frame OK */ +#define I596_RFD_ERR_LENGTH 0x1000 /* status: length error */ +#define I596_RFD_ERR_CRC 0x0800 /* status: CRC error */ +#define I596_RFD_ERR_ALIGN 0x0400 /* status: alignment error */ +#define I596_RFD_ERR_NOBUFS 0x0200 /* status: resource error */ +#define I596_RFD_ERR_DMA 0x0100 /* status: DMA error */ +#define I596_RFD_ERR_SHORT 0x0080 /* status: too short error */ +#define I596_RFD_NOMATCH 0x0002 /* status: IA was not matched */ +#define I596_RFD_COLLISION 0x0001 /* status: collision during receive */ + +#define I596_RFD_EL 0x8000 /* cmd: end of RFD list */ +#define I596_RFD_FLEX 0x0008 /* cmd: Flexible mode */ +#define I596_RFD_EOF 0x8000 /* count: last buffer in the frame */ +#define I596_RFD_F 0x4000 /* count: The actual count is valid */ + +/************************************************************************/ +/* */ +/* Commands */ +/* */ +/************************************************************************/ + + /* values for cmd halfword in all the structs below */ +#define I596_CB_CMD 0x07 /* CB COMMANDS */ +#define I596_CB_CMD_NOP 0 +#define I596_CB_CMD_IA 1 +#define I596_CB_CMD_CONF 2 +#define I596_CB_CMD_MCAST 3 +#define I596_CB_CMD_XMIT 4 +#define I596_CB_CMD_TDR 5 +#define I596_CB_CMD_DUMP 6 +#define I596_CB_CMD_DIAG 7 + +#define I596_CB_CMD_EL 0x8000 /* CB is last in linked list */ +#define I596_CB_CMD_S 0x4000 /* Suspend after execution */ +#define I596_CB_CMD_I 0x2000 /* cause interrupt */ + + /* values for the status halfword in all the struct below */ +#define I596_CB_STATUS 0xF000 /* All four status bits */ +#define I596_CB_STATUS_C 0x8000 /* Command complete */ +#define I596_CB_STATUS_B 0x4000 /* Command busy executing */ +#define I596_CB_STATUS_C_OR_B 0xC000 /* Command complete or busy */ +#define I596_CB_STATUS_OK 0x2000 /* Command complete, no errors */ +#define I596_CB_STATUS_A 0x1000 /* Command busy executing */ + +#define I596_CB_NOLINK ((I596_CB *) 0xffffffff) + +/* + * I596_CB_NOP: NOP Command (p. 4-34) + */ +typedef volatile struct +{ + ushort status; + ushort cmd; + union _I596_CB *next; +} I596_CB_NOP; + +/* + * Same as above, but command and status in one ulong for speed + */ +typedef volatile struct +{ + ulong csr; + union _I596_CB *next; +} I596_CB_FAST; +#define FASTs(X) (X) +#define FASTc(X) ((X)<<16) + +/* + * I596_CB_IA: Individual (MAC) Address Command (p. 4-35) + */ +typedef volatile struct +{ + ushort status; + ushort cmd; + union _I596_CB *next; + uchar addr[6]; +} I596_CB_IA; + +/* + * I596_CB_CONF: Configure Command (p. 4-37) + */ +typedef volatile struct +{ + ushort status; + ushort cmd; + union _I596_CB *next; + uchar conf[14]; +} I596_CB_CONF; + +#define I596_CONF0_P 0x80 /* Enable RBD Prefetch Bit */ +#define I596_CONF0_COUNT 14 /* Count of configuration bytes */ + +#define I596_CONF1_MON_OFF 0xC0 /* Monitor mode: Monitor off */ +#define I596_CONF1_MON_ON 0x80 /* Monitor mode: Monitor on */ +#define I596_CONF1_TxFIFO(W) (W) /* TxFIFO trigger, in words */ + +#define I596_CONF2_SAVEBF 0x80 /* Save bad frames */ + +#define I596_CONF3_ADDRLEN(B) (B) /* Address length */ +#define I596_CONF3_NOSRCINSERT 0x08 /* Do not insert source address */ +#define I596_CONF3_PREAMBLE8 0x20 /* 8 byte preamble */ +#define I596_CONF3_LOOPOFF 0x00 /* Loopback: Off */ +#define I596_CONF3_LOOPINT 0x40 /* Loopback: internal */ +#define I596_CONF3_LOOPEXT 0xC0 /* Loopback: external */ + +#define I596_CONF4_LINPRI(ST) (ST) /* Linear priority: slot times */ +#define I596_CONF4_EXPPRI(ST) (ST) /* Exponential priority: slot times */ +#define I596_CONF4_IEEE_BOM 0 /* IEEE 802.3 backoff method */ + +#define I596_CONF5_IFS(X) (X) /* Interframe spacing in clocks */ + +#define I596_CONF6_ST_LOW(X) (X&255) /* Slot time, low byte */ + +#define I596_CONF7_ST_HI(X) (X>>8) /* Slot time, high bits */ +#define I596_CONF7_RETRY(X) (X<<4) /* Max retry number */ + +#define I596_CONF8_PROMISC 0x01 /* Rcv all frames */ +#define I596_CONF8_NOBROAD 0x02 +#define I596_CONF8_MANCHESTER 0x04 +#define I596_CONF8_TxNOCRS 0x08 +#define I596_CONF8_NOCRC 0x10 +#define I596_CONF8_CRC_CCITT 0x20 +#define I596_CONF8_BITSTUFFING 0x40 +#define I596_CONF8_PADDING 0x80 + +#define I596_CONF9_CSFILTER(X) (X) +#define I596_CONF9_CSINT(X) 0x08 +#define I596_CONF9_CDFILTER(X) (X<<4) +#define I596_CONF9_CDINT(X) 0x80 + +#define I596_CONF10_MINLEN(X) (X) /* Minimum frame length */ + +#define I596_CONF11_PRECRS_ 0x01 /* Preamble before carrier sense */ +#define I596_CONF11_LNGFLD_ 0x02 /* Padding in End of Carrier */ +#define I596_CONF11_CRCINM_ 0x04 /* CRC in memory */ +#define I596_CONF11_AUTOTX 0x08 /* Auto retransmit */ +#define I596_CONF11_CSBSAC_ 0x10 /* Collision detect by src addr cmp. */ +#define I596_CONF11_MCALL_ 0x20 /* Multicast all */ + +#define I596_CONF13_RESERVED 0x3f /* Reserved: must be ones */ +#define I596_CONF13_MULTIA 0x40 /* Enable multiple addr. reception */ +#define I596_CONF13_DISBOF 0x80 /* Disable backoff algorithm */ +/* + * I596_CB_MCAST: Multicast-Setup Command (p. 4-54) + */ +typedef volatile struct +{ + ushort status; + ushort cmd; + union _I596_CB *next; + ushort count; /* Number of 6-byte addrs that follow */ + uchar addr[6][1]; +} I596_CB_MCAST; + +/* + * I596_CB_XMIT: Transmit Command (p. 4-56) + */ +typedef I596_TFD I596_CB_XMIT; + +#define I596_CB_XMIT_NOCRC 0x0010 /* cmd: No CRC insertion */ +#define I596_CB_XMIT_FLEX 0x0008 /* cmd: Flexible memory mode */ + +#define I596_CB_XMIT_ERR_LATE 0x0800 /* status: error: late collision */ +#define I596_CB_XMIT_ERR_NOCRS 0x0400 /* status: error: no carriers sense */ +#define I596_CB_XMIT_ERR_NOCTS 0x0200 /* status: error: loss of CTS */ +#define I596_CB_XMIT_ERR_UNDER 0x0100 /* status: error: DMA underrun */ +#define I596_CB_XMIT_ERR_MAXCOL 0x0020 /* status: error: maximum collisions */ +#define I596_CB_XMIT_COLLISIONS 0x000f /* status: number of collisions */ + +/* + * I596_CB_TDR: Time Domain Reflectometry Command (p. 4-63) + */ +typedef volatile struct +{ + ushort status; + ushort cmd; + union _I596_CB *next; + ushort time; +} I596_CB_TDR; + +/* + * I596_CB_DUMP: Dump Command (p. 4-65) + */ +typedef volatile struct +{ + ushort status; + ushort cmd; + union _I596_CB *next; + uchar *buf; +} I596_CB_DUMP; + +/* + * I596_CB_DIAG: Diagnose Command (p. 4-77) + */ +typedef volatile struct +{ + ushort status; + ushort cmd; + union _I596_CB *next; +} I596_CB_DIAG; + +/* + * I596_CB: Command Block + */ +typedef union _I596_CB +{ + I596_CB_NOP nop; + I596_CB_IA ia; + I596_CB_CONF conf; + I596_CB_MCAST mcast; + I596_CB_XMIT xmit; + I596_CB_TDR tdr; + I596_CB_DUMP dump; + I596_CB_DIAG diag; + + /* command and status in one ulong for speed... */ + I596_CB_FAST fast; +} I596_CB; + +/************************************************************************/ +/* */ +/* I596_SCB: System Configuration Block (p. 4-26) */ +/* */ +/************************************************************************/ +typedef volatile struct +{ + volatile ushort status; /* Status word */ + volatile ushort cmd; /* Command word */ + I596_CB *cbp; + I596_RFD *rfdp; + ulong crc_errs; + ulong align_errs; + ulong resource_errs; + ulong overrun_errs; + ulong rcvcdt_errs; + ulong short_errs; + ushort toff; + ushort ton; +} I596_SCB; + + /* cmd halfword values */ +#define I596_SCB_ACK 0xF000 /* ACKNOWLEDGMENTS */ +#define I596_SCB_ACK_CX 0x8000 /* Ack command completion */ +#define I596_SCB_ACK_FR 0x4000 /* Ack received frame */ +#define I596_SCB_ACK_CNA 0x2000 /* Ack command unit not active */ +#define I596_SCB_ACK_RNR 0x1000 /* Ack rcv unit not ready */ +#define I596_SCB_ACK_ALL 0xF000 /* Ack everything */ + +#define I596_SCB_CUC 0x0700 /* COMMAND UNIT COMMANDS */ +#define I596_SCB_CUC_NOP 0x0000 /* No operation */ +#define I596_SCB_CUC_START 0x0100 /* Start execution of first CB */ +#define I596_SCB_CUC_RESUME 0x0200 /* Resume execution */ +#define I596_SCB_CUC_SUSPEND 0x0300 /* Suspend after current CB */ +#define I596_SCB_CUC_ABORT 0x0400 /* Abort current CB immediately */ +#define I596_SCB_CUC_LOAD 0x0500 /* Load Bus throttle timers */ +#define I596_SCB_CUC_LOADIMM 0x0600 /* Load Bus throttle timers, now */ + +#define I596_SCB_RUC 0x0070 /* RECEIVE UNIT COMMANDS */ +#define I596_SCB_RUC_NOP 0x0000 /* No operation */ +#define I596_SCB_RUC_START 0x0010 /* Start reception */ +#define I596_SCB_RUC_RESUME 0x0020 /* Resume reception */ +#define I596_SCB_RUC_SUSPEND 0x0030 /* Suspend reception */ +#define I596_SCB_RUC_ABORT 0x0040 /* Abort reception */ + +#define I596_SCB_RESET 0x0080 /* Hard reset chip */ + + /* status halfword values */ +#define I596_SCB_STAT 0xF000 /* STATUS */ +#define I596_SCB_CX 0x8000 /* command completion */ +#define I596_SCB_FR 0x4000 /* received frame */ +#define I596_SCB_CNA 0x2000 /* command unit not active */ +#define I596_SCB_RNR 0x1000 /* rcv unit not ready */ + +#define I596_SCB_CUS 0x0700 /* COMMAND UNIT STATUS */ +#define I596_SCB_CUS_IDLE 0x0000 /* Idle */ +#define I596_SCB_CUS_SUSPENDED 0x0100 /* Suspended */ +#define I596_SCB_CUS_ACTIVE 0x0200 /* Active */ + +#define I596_SCB_RUS 0x00F0 /* RECEIVE UNIT STATUS */ +#define I596_SCB_RUS_IDLE 0x0000 /* Idle */ +#define I596_SCB_RUS_SUSPENDED 0x0010 /* Suspended */ +#define I596_SCB_RUS_NORES 0x0020 /* No Resources */ +#define I596_SCB_RUS_READY 0x0040 /* Ready */ +#define I596_SCB_RUS_NORBDS 0x0080 /* No more RBDs modifier */ + +#define I596_SCB_LOADED 0x0008 /* Bus timers loaded */ + +/************************************************************************/ +/* */ +/* I596_ISCP: Intermediate System Configuration Ptr (p 4-26) */ +/* */ +/************************************************************************/ +typedef volatile struct +{ + ulong busy; /* Set to 1; I596 clears it when scbp is read */ + I596_SCB *scbp; +} I596_ISCP; + +/************************************************************************/ +/* */ +/* I596_SCP: System Configuration Pointer (p. 4-23) */ +/* */ +/************************************************************************/ +typedef volatile struct +{ + ulong sysbus; + ulong dummy; + I596_ISCP *iscpp; +} I596_SCP; + + /* .sysbus values */ +#define I596_SCP_RESERVED 0x400000 /* Reserved bits must be set */ +#define I596_SCP_INTLOW 0x200000 /* Intr. Polarity active low */ +#define I596_SCP_INTHIGH 0 /* Intr. Polarity active high */ +#define I596_SCP_LOCKDIS 0x100000 /* Lock Function disabled */ +#define I596_SCP_LOCKEN 0 /* Lock Function enabled */ +#define I596_SCP_ETHROTTLE 0x080000 /* External Bus Throttle */ +#define I596_SCP_ITHROTTLE 0 /* Internal Bus Throttle */ +#define I596_SCP_LINEAR 0x040000 /* Linear Mode */ +#define I596_SCP_SEGMENTED 0x020000 /* Segmented Mode */ +#define I596_SCP_82586 0x000000 /* 82586 Mode */ |