DSA: Convert DSA comments to network-style comments

Convert DSA driver comments to network-style comments as reported by
checkpatch.pl.  Fix spelling error.

Signed-off-by: Barry Grussling <barry@grussling.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 18 insertions, 52 deletions

diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c
index a2c62c2f30e..d436668cb51 100644
--- a/drivers/net/dsa/mv88e6xxx.c
+++ b/drivers/net/dsa/mv88e6xxx.c
@@ -15,8 +15,7 @@
 #include <net/dsa.h>
 #include "mv88e6xxx.h"
 
-/*
- * If the switch's ADDR[4:0] strap pins are strapped to zero, it will
+/* If the switch's ADDR[4:0] strap pins are strapped to zero, it will
  * use all 32 SMI bus addresses on its SMI bus, and all switch registers
  * will be directly accessible on some {device address,register address}
  * pair.  If the ADDR[4:0] pins are not strapped to zero, the switch
@@ -48,30 +47,22 @@ int __mv88e6xxx_reg_read(struct mii_bus *bus, int sw_addr, int addr, int reg)
 	if (sw_addr == 0)
 		return mdiobus_read(bus, addr, reg);
 
-	/*
-	 * Wait for the bus to become free.
-	 */
+	/* Wait for the bus to become free. */
 	ret = mv88e6xxx_reg_wait_ready(bus, sw_addr);
 	if (ret < 0)
 		return ret;
 
-	/*
-	 * Transmit the read command.
-	 */
+	/* Transmit the read command. */
 	ret = mdiobus_write(bus, sw_addr, 0, 0x9800 | (addr << 5) | reg);
 	if (ret < 0)
 		return ret;
 
-	/*
-	 * Wait for the read command to complete.
-	 */
+	/* Wait for the read command to complete. */
 	ret = mv88e6xxx_reg_wait_ready(bus, sw_addr);
 	if (ret < 0)
 		return ret;
 
-	/*
-	 * Read the data.
-	 */
+	/* Read the data. */
 	ret = mdiobus_read(bus, sw_addr, 1);
 	if (ret < 0)
 		return ret;
@@ -100,30 +91,22 @@ int __mv88e6xxx_reg_write(struct mii_bus *bus, int sw_addr, int addr,
 	if (sw_addr == 0)
 		return mdiobus_write(bus, addr, reg, val);
 
-	/*
-	 * Wait for the bus to become free.
-	 */
+	/* Wait for the bus to become free. */
 	ret = mv88e6xxx_reg_wait_ready(bus, sw_addr);
 	if (ret < 0)
 		return ret;
 
-	/*
-	 * Transmit the data to write.
-	 */
+	/* Transmit the data to write. */
 	ret = mdiobus_write(bus, sw_addr, 1, val);
 	if (ret < 0)
 		return ret;
 
-	/*
-	 * Transmit the write command.
-	 */
+	/* Transmit the write command. */
 	ret = mdiobus_write(bus, sw_addr, 0, 0x9400 | (addr << 5) | reg);
 	if (ret < 0)
 		return ret;
 
-	/*
-	 * Wait for the write command to complete.
-	 */
+	/* Wait for the write command to complete. */
 	ret = mv88e6xxx_reg_wait_ready(bus, sw_addr);
 	if (ret < 0)
 		return ret;
@@ -146,9 +129,7 @@ int mv88e6xxx_reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
 
 int mv88e6xxx_config_prio(struct dsa_switch *ds)
 {
-	/*
-	 * Configure the IP ToS mapping registers.
-	 */
+	/* Configure the IP ToS mapping registers. */
 	REG_WRITE(REG_GLOBAL, 0x10, 0x0000);
 	REG_WRITE(REG_GLOBAL, 0x11, 0x0000);
 	REG_WRITE(REG_GLOBAL, 0x12, 0x5555);
@@ -158,9 +139,7 @@ int mv88e6xxx_config_prio(struct dsa_switch *ds)
 	REG_WRITE(REG_GLOBAL, 0x16, 0xffff);
 	REG_WRITE(REG_GLOBAL, 0x17, 0xffff);
 
-	/*
-	 * Configure the IEEE 802.1p priority mapping register.
-	 */
+	/* Configure the IEEE 802.1p priority mapping register. */
 	REG_WRITE(REG_GLOBAL, 0x18, 0xfa41);
 
 	return 0;
@@ -183,14 +162,10 @@ int mv88e6xxx_set_addr_indirect(struct dsa_switch *ds, u8 *addr)
 	for (i = 0; i < 6; i++) {
 		int j;
 
-		/*
-		 * Write the MAC address byte.
-		 */
+		/* Write the MAC address byte. */
 		REG_WRITE(REG_GLOBAL2, 0x0d, 0x8000 | (i << 8) | addr[i]);
 
-		/*
-		 * Wait for the write to complete.
-		 */
+		/* Wait for the write to complete. */
 		for (j = 0; j < 16; j++) {
 			ret = REG_READ(REG_GLOBAL2, 0x0d);
 			if ((ret & 0x8000) == 0)
@@ -282,8 +257,7 @@ static int mv88e6xxx_ppu_access_get(struct dsa_switch *ds)
 
 	mutex_lock(&ps->ppu_mutex);
 
-	/*
-	 * If the PHY polling unit is enabled, disable it so that
+	/* If the PHY polling unit is enabled, disable it so that
 	 * we can access the PHY registers.  If it was already
 	 * disabled, cancel the timer that is going to re-enable
 	 * it.
@@ -307,9 +281,7 @@ static void mv88e6xxx_ppu_access_put(struct dsa_switch *ds)
 {
 	struct mv88e6xxx_priv_state *ps = (void *)(ds + 1);
 
-	/*
-	 * Schedule a timer to re-enable the PHY polling unit.
-	 */
+	/* Schedule a timer to re-enable the PHY polling unit. */
 	mod_timer(&ps->ppu_timer, jiffies + msecs_to_jiffies(10));
 	mutex_unlock(&ps->ppu_mutex);
 }
@@ -431,14 +403,10 @@ static int mv88e6xxx_stats_snapshot(struct dsa_switch *ds, int port)
 {
 	int ret;
 
-	/*
-	 * Snapshot the hardware statistics counters for this port.
-	 */
+	/* Snapshot the hardware statistics counters for this port. */
 	REG_WRITE(REG_GLOBAL, 0x1d, 0xdc00 | port);
 
-	/*
-	 * Wait for the snapshotting to complete.
-	 */
+	/* Wait for the snapshotting to complete. */
 	ret = mv88e6xxx_stats_wait(ds);
 	if (ret < 0)
 		return ret;
@@ -502,9 +470,7 @@ void mv88e6xxx_get_ethtool_stats(struct dsa_switch *ds,
 		return;
 	}
 
-	/*
-	 * Read each of the counters.
-	 */
+	/* Read each of the counters. */
 	for (i = 0; i < nr_stats; i++) {
 		struct mv88e6xxx_hw_stat *s = stats + i;
 		u32 low;