Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:

	sound/core/memalloc.c

1 files changed, 242 insertions, 11 deletions

diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 9e38452a738..523b9716a54 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -43,7 +43,9 @@
  * 82567LM-2 Gigabit Network Connection
  * 82567LF-2 Gigabit Network Connection
  * 82567V-2 Gigabit Network Connection
- * 82562GT-3 10/100 Network Connection
+ * 82567LF-3 Gigabit Network Connection
+ * 82567LM-3 Gigabit Network Connection
+ * 82567LM-4 Gigabit Network Connection
  */
 
 #include <linux/netdevice.h>
@@ -58,6 +60,7 @@
 #define ICH_FLASH_HSFCTL		0x0006
 #define ICH_FLASH_FADDR			0x0008
 #define ICH_FLASH_FDATA0		0x0010
+#define ICH_FLASH_PR0			0x0074
 
 #define ICH_FLASH_READ_COMMAND_TIMEOUT	500
 #define ICH_FLASH_WRITE_COMMAND_TIMEOUT	500
@@ -150,6 +153,19 @@ union ich8_hws_flash_regacc {
 	u16 regval;
 };
 
+/* ICH Flash Protected Region */
+union ich8_flash_protected_range {
+	struct ich8_pr {
+		u32 base:13;     /* 0:12 Protected Range Base */
+		u32 reserved1:2; /* 13:14 Reserved */
+		u32 rpe:1;       /* 15 Read Protection Enable */
+		u32 limit:13;    /* 16:28 Protected Range Limit */
+		u32 reserved2:2; /* 29:30 Reserved */
+		u32 wpe:1;       /* 31 Write Protection Enable */
+	} range;
+	u32 regval;
+};
+
 static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw);
 static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw);
 static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw);
@@ -157,12 +173,15 @@ static s32 e1000_check_polarity_ife_ich8lan(struct e1000_hw *hw);
 static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank);
 static s32 e1000_retry_write_flash_byte_ich8lan(struct e1000_hw *hw,
 						u32 offset, u8 byte);
+static s32 e1000_read_flash_byte_ich8lan(struct e1000_hw *hw, u32 offset,
+					 u8 *data);
 static s32 e1000_read_flash_word_ich8lan(struct e1000_hw *hw, u32 offset,
 					 u16 *data);
 static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
 					 u8 size, u16 *data);
 static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw);
 static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw);
+static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw);
 
 static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg)
 {
@@ -366,6 +385,9 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
 	return 0;
 }
 
+static DEFINE_MUTEX(nvm_mutex);
+static pid_t nvm_owner = -1;
+
 /**
  *  e1000_acquire_swflag_ich8lan - Acquire software control flag
  *  @hw: pointer to the HW structure
@@ -379,6 +401,15 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw)
 	u32 extcnf_ctrl;
 	u32 timeout = PHY_CFG_TIMEOUT;
 
+	might_sleep();
+
+	if (!mutex_trylock(&nvm_mutex)) {
+		WARN(1, KERN_ERR "e1000e mutex contention. Owned by pid %d\n",
+		     nvm_owner);
+		mutex_lock(&nvm_mutex);
+	}
+	nvm_owner = current->pid;
+
 	while (timeout) {
 		extcnf_ctrl = er32(EXTCNF_CTRL);
 		extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG;
@@ -393,6 +424,10 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw)
 
 	if (!timeout) {
 		hw_dbg(hw, "FW or HW has locked the resource for too long.\n");
+		extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
+		ew32(EXTCNF_CTRL, extcnf_ctrl);
+		nvm_owner = -1;
+		mutex_unlock(&nvm_mutex);
 		return -E1000_ERR_CONFIG;
 	}
 
@@ -414,6 +449,25 @@ static void e1000_release_swflag_ich8lan(struct e1000_hw *hw)
 	extcnf_ctrl = er32(EXTCNF_CTRL);
 	extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
 	ew32(EXTCNF_CTRL, extcnf_ctrl);
+
+	nvm_owner = -1;
+	mutex_unlock(&nvm_mutex);
+}
+
+/**
+ *  e1000_check_mng_mode_ich8lan - Checks management mode
+ *  @hw: pointer to the HW structure
+ *
+ *  This checks if the adapter has manageability enabled.
+ *  This is a function pointer entry point only called by read/write
+ *  routines for the PHY and NVM parts.
+ **/
+static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw)
+{
+	u32 fwsm = er32(FWSM);
+
+	return (fwsm & E1000_FWSM_MODE_MASK) ==
+		(E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT);
 }
 
 /**
@@ -897,6 +951,56 @@ static s32 e1000_set_d3_lplu_state_ich8lan(struct e1000_hw *hw, bool active)
 }
 
 /**
+ *  e1000_valid_nvm_bank_detect_ich8lan - finds out the valid bank 0 or 1
+ *  @hw: pointer to the HW structure
+ *  @bank:  pointer to the variable that returns the active bank
+ *
+ *  Reads signature byte from the NVM using the flash access registers.
+ **/
+static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	/* flash bank size is in words */
+	u32 bank1_offset = nvm->flash_bank_size * sizeof(u16);
+	u32 act_offset = E1000_ICH_NVM_SIG_WORD * 2 + 1;
+	u8 bank_high_byte = 0;
+
+	if (hw->mac.type != e1000_ich10lan) {
+		if (er32(EECD) & E1000_EECD_SEC1VAL)
+			*bank = 1;
+		else
+			*bank = 0;
+	} else {
+		/*
+		 * Make sure the signature for bank 0 is valid,
+		 * if not check for bank1
+		 */
+		e1000_read_flash_byte_ich8lan(hw, act_offset, &bank_high_byte);
+		if ((bank_high_byte & 0xC0) == 0x80) {
+			*bank = 0;
+		} else {
+			/*
+			 * find if segment 1 is valid by verifying
+			 * bit 15:14 = 10b in word 0x13
+			 */
+			e1000_read_flash_byte_ich8lan(hw,
+						      act_offset + bank1_offset,
+						      &bank_high_byte);
+
+			/* bank1 has a valid signature equivalent to SEC1V */
+			if ((bank_high_byte & 0xC0) == 0x80) {
+				*bank = 1;
+			} else {
+				hw_dbg(hw, "ERROR: EEPROM not present\n");
+				return -E1000_ERR_NVM;
+			}
+		}
+	}
+
+	return 0;
+}
+
+/**
  *  e1000_read_nvm_ich8lan - Read word(s) from the NVM
  *  @hw: pointer to the HW structure
  *  @offset: The offset (in bytes) of the word(s) to read.
@@ -912,6 +1016,7 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
 	struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
 	u32 act_offset;
 	s32 ret_val;
+	u32 bank = 0;
 	u16 i, word;
 
 	if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) ||
@@ -924,10 +1029,11 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
 	if (ret_val)
 		return ret_val;
 
-	/* Start with the bank offset, then add the relative offset. */
-	act_offset = (er32(EECD) & E1000_EECD_SEC1VAL)
-		     ? nvm->flash_bank_size
-		     : 0;
+	ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
+	if (ret_val)
+		return ret_val;
+
+	act_offset = (bank) ? nvm->flash_bank_size : 0;
 	act_offset += offset;
 
 	for (i = 0; i < words; i++) {
@@ -1075,6 +1181,29 @@ static s32 e1000_read_flash_word_ich8lan(struct e1000_hw *hw, u32 offset,
 }
 
 /**
+ *  e1000_read_flash_byte_ich8lan - Read byte from flash
+ *  @hw: pointer to the HW structure
+ *  @offset: The offset of the byte to read.
+ *  @data: Pointer to a byte to store the value read.
+ *
+ *  Reads a single byte from the NVM using the flash access registers.
+ **/
+static s32 e1000_read_flash_byte_ich8lan(struct e1000_hw *hw, u32 offset,
+					 u8 *data)
+{
+	s32 ret_val;
+	u16 word = 0;
+
+	ret_val = e1000_read_flash_data_ich8lan(hw, offset, 1, &word);
+	if (ret_val)
+		return ret_val;
+
+	*data = (u8)word;
+
+	return 0;
+}
+
+/**
  *  e1000_read_flash_data_ich8lan - Read byte or word from NVM
  *  @hw: pointer to the HW structure
  *  @offset: The offset (in bytes) of the byte or word to read.
@@ -1205,7 +1334,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
 {
 	struct e1000_nvm_info *nvm = &hw->nvm;
 	struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
-	u32 i, act_offset, new_bank_offset, old_bank_offset;
+	u32 i, act_offset, new_bank_offset, old_bank_offset, bank;
 	s32 ret_val;
 	u16 data;
 
@@ -1225,7 +1354,11 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
 	 * write to bank 0 etc.  We also need to erase the segment that
 	 * is going to be written
 	 */
-	if (!(er32(EECD) & E1000_EECD_SEC1VAL)) {
+	ret_val =  e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
+	if (ret_val)
+		return ret_val;
+
+	if (bank == 0) {
 		new_bank_offset = nvm->flash_bank_size;
 		old_bank_offset = 0;
 		e1000_erase_flash_bank_ich8lan(hw, 1);
@@ -1284,6 +1417,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
 	 * programming failed.
 	 */
 	if (ret_val) {
+		/* Possibly read-only, see e1000e_write_protect_nvm_ich8lan() */
 		hw_dbg(hw, "Flash commit failed.\n");
 		e1000_release_swflag_ich8lan(hw);
 		return ret_val;
@@ -1374,6 +1508,49 @@ static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw)
 }
 
 /**
+ *  e1000e_write_protect_nvm_ich8lan - Make the NVM read-only
+ *  @hw: pointer to the HW structure
+ *
+ *  To prevent malicious write/erase of the NVM, set it to be read-only
+ *  so that the hardware ignores all write/erase cycles of the NVM via
+ *  the flash control registers.  The shadow-ram copy of the NVM will
+ *  still be updated, however any updates to this copy will not stick
+ *  across driver reloads.
+ **/
+void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw)
+{
+	union ich8_flash_protected_range pr0;
+	union ich8_hws_flash_status hsfsts;
+	u32 gfpreg;
+	s32 ret_val;
+
+	ret_val = e1000_acquire_swflag_ich8lan(hw);
+	if (ret_val)
+		return;
+
+	gfpreg = er32flash(ICH_FLASH_GFPREG);
+
+	/* Write-protect GbE Sector of NVM */
+	pr0.regval = er32flash(ICH_FLASH_PR0);
+	pr0.range.base = gfpreg & FLASH_GFPREG_BASE_MASK;
+	pr0.range.limit = ((gfpreg >> 16) & FLASH_GFPREG_BASE_MASK);
+	pr0.range.wpe = true;
+	ew32flash(ICH_FLASH_PR0, pr0.regval);
+
+	/*
+	 * Lock down a subset of GbE Flash Control Registers, e.g.
+	 * PR0 to prevent the write-protection from being lifted.
+	 * Once FLOCKDN is set, the registers protected by it cannot
+	 * be written until FLOCKDN is cleared by a hardware reset.
+	 */
+	hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
+	hsfsts.hsf_status.flockdn = true;
+	ew32flash(ICH_FLASH_HSFSTS, hsfsts.regval);
+
+	e1000_release_swflag_ich8lan(hw);
+}
+
+/**
  *  e1000_write_flash_data_ich8lan - Writes bytes to the NVM
  *  @hw: pointer to the HW structure
  *  @offset: The offset (in bytes) of the byte/word to read.
@@ -1720,6 +1897,9 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
 	ew32(CTRL, (ctrl | E1000_CTRL_RST));
 	msleep(20);
 
+	/* release the swflag because it is not reset by hardware reset */
+	e1000_release_swflag_ich8lan(hw);
+
 	ret_val = e1000e_get_auto_rd_done(hw);
 	if (ret_val) {
 		/*
@@ -2189,13 +2369,14 @@ void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw)
  *  'LPLU Enabled' and 'Gig Disable' to force link speed negotiation
  *  to a lower speed.
  *
- *  Should only be called for ICH9 devices.
+ *  Should only be called for ICH9 and ICH10 devices.
  **/
 void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw)
 {
 	u32 phy_ctrl;
 
-	if (hw->mac.type == e1000_ich9lan) {
+	if ((hw->mac.type == e1000_ich10lan) ||
+	    (hw->mac.type == e1000_ich9lan)) {
 		phy_ctrl = er32(PHY_CTRL);
 		phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU |
 		            E1000_PHY_CTRL_GBE_DISABLE;
@@ -2253,6 +2434,39 @@ static s32 e1000_led_off_ich8lan(struct e1000_hw *hw)
 }
 
 /**
+ *  e1000_get_cfg_done_ich8lan - Read config done bit
+ *  @hw: pointer to the HW structure
+ *
+ *  Read the management control register for the config done bit for
+ *  completion status.  NOTE: silicon which is EEPROM-less will fail trying
+ *  to read the config done bit, so an error is *ONLY* logged and returns
+ *  E1000_SUCCESS.  If we were to return with error, EEPROM-less silicon
+ *  would not be able to be reset or change link.
+ **/
+static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw)
+{
+	u32 bank = 0;
+
+	e1000e_get_cfg_done(hw);
+
+	/* If EEPROM is not marked present, init the IGP 3 PHY manually */
+	if (hw->mac.type != e1000_ich10lan) {
+		if (((er32(EECD) & E1000_EECD_PRES) == 0) &&
+		    (hw->phy.type == e1000_phy_igp_3)) {
+			e1000e_phy_init_script_igp3(hw);
+		}
+	} else {
+		if (e1000_valid_nvm_bank_detect_ich8lan(hw, &bank)) {
+			/* Maybe we should do a basic PHY config */
+			hw_dbg(hw, "EEPROM not present\n");
+			return -E1000_ERR_CONFIG;
+		}
+	}
+
+	return 0;
+}
+
+/**
  *  e1000_clear_hw_cntrs_ich8lan - Clear statistical counters
  *  @hw: pointer to the HW structure
  *
@@ -2282,7 +2496,7 @@ static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw)
 }
 
 static struct e1000_mac_operations ich8_mac_ops = {
-	.mng_mode_enab		= E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT,
+	.check_mng_mode		= e1000_check_mng_mode_ich8lan,
 	.check_for_link		= e1000e_check_for_copper_link,
 	.cleanup_led		= e1000_cleanup_led_ich8lan,
 	.clear_hw_cntrs		= e1000_clear_hw_cntrs_ich8lan,
@@ -2302,7 +2516,7 @@ static struct e1000_phy_operations ich8_phy_ops = {
 	.check_reset_block	= e1000_check_reset_block_ich8lan,
 	.commit_phy		= NULL,
 	.force_speed_duplex	= e1000_phy_force_speed_duplex_ich8lan,
-	.get_cfg_done		= e1000e_get_cfg_done,
+	.get_cfg_done		= e1000_get_cfg_done_ich8lan,
 	.get_cable_length	= e1000e_get_cable_length_igp_2,
 	.get_phy_info		= e1000_get_phy_info_ich8lan,
 	.read_phy_reg		= e1000e_read_phy_reg_igp,
@@ -2357,3 +2571,20 @@ struct e1000_info e1000_ich9_info = {
 	.nvm_ops		= &ich8_nvm_ops,
 };
 
+struct e1000_info e1000_ich10_info = {
+	.mac			= e1000_ich10lan,
+	.flags			= FLAG_HAS_JUMBO_FRAMES
+				  | FLAG_IS_ICH
+				  | FLAG_HAS_WOL
+				  | FLAG_RX_CSUM_ENABLED
+				  | FLAG_HAS_CTRLEXT_ON_LOAD
+				  | FLAG_HAS_AMT
+				  | FLAG_HAS_ERT
+				  | FLAG_HAS_FLASH
+				  | FLAG_APME_IN_WUC,
+	.pba			= 10,
+	.get_variants		= e1000_get_variants_ich8lan,
+	.mac_ops		= &ich8_mac_ops,
+	.phy_ops		= &ich8_phy_ops,
+	.nvm_ops		= &ich8_nvm_ops,
+};