e1000e: provide MAC-family-specific function to set LAN ID

Provide MAC-specific function pointer to determine the LAN ID (PCI func).
The LAN ID is used internally by the driver to determine which h/w lock
to use to protect accessing the PHY on ESB2 as well as help to determine
the alternate MAC address on some parts.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 37 insertions, 11 deletions

diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index 547542428ed..5f6b17148d3 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -51,10 +51,10 @@ enum e1000_mng_mode {
  **/
 s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw)
 {
+	struct e1000_mac_info *mac = &hw->mac;
 	struct e1000_bus_info *bus = &hw->bus;
 	struct e1000_adapter *adapter = hw->adapter;
-	u32 status;
-	u16 pcie_link_status, pci_header_type, cap_offset;
+	u16 pcie_link_status, cap_offset;
 
 	cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP);
 	if (!cap_offset) {
@@ -68,20 +68,46 @@ s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw)
 						    PCIE_LINK_WIDTH_SHIFT);
 	}
 
-	pci_read_config_word(adapter->pdev, PCI_HEADER_TYPE_REGISTER,
-			     &pci_header_type);
-	if (pci_header_type & PCI_HEADER_TYPE_MULTIFUNC) {
-		status = er32(STATUS);
-		bus->func = (status & E1000_STATUS_FUNC_MASK)
-			    >> E1000_STATUS_FUNC_SHIFT;
-	} else {
-		bus->func = 0;
-	}
+	mac->ops.set_lan_id(hw);
 
 	return 0;
 }
 
 /**
+ *  e1000_set_lan_id_multi_port_pcie - Set LAN id for PCIe multiple port devices
+ *
+ *  @hw: pointer to the HW structure
+ *
+ *  Determines the LAN function id by reading memory-mapped registers
+ *  and swaps the port value if requested.
+ **/
+void e1000_set_lan_id_multi_port_pcie(struct e1000_hw *hw)
+{
+	struct e1000_bus_info *bus = &hw->bus;
+	u32 reg;
+
+	/*
+	 * The status register reports the correct function number
+	 * for the device regardless of function swap state.
+	 */
+	reg = er32(STATUS);
+	bus->func = (reg & E1000_STATUS_FUNC_MASK) >> E1000_STATUS_FUNC_SHIFT;
+}
+
+/**
+ *  e1000_set_lan_id_single_port - Set LAN id for a single port device
+ *  @hw: pointer to the HW structure
+ *
+ *  Sets the LAN function id to zero for a single port device.
+ **/
+void e1000_set_lan_id_single_port(struct e1000_hw *hw)
+{
+	struct e1000_bus_info *bus = &hw->bus;
+
+	bus->func = 0;
+}
+
+/**
  *  e1000_clear_vfta_generic - Clear VLAN filter table
  *  @hw: pointer to the HW structure
  *