Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1815 commits)
  mac80211: fix reorder buffer release
  iwmc3200wifi: Enable wimax core through module parameter
  iwmc3200wifi: Add wifi-wimax coexistence mode as a module parameter
  iwmc3200wifi: Coex table command does not expect a response
  iwmc3200wifi: Update wiwi priority table
  iwlwifi: driver version track kernel version
  iwlwifi: indicate uCode type when fail dump error/event log
  iwl3945: remove duplicated event logging code
  b43: fix two warnings
  ipw2100: fix rebooting hang with driver loaded
  cfg80211: indent regulatory messages with spaces
  iwmc3200wifi: fix NULL pointer dereference in pmkid update
  mac80211: Fix TX status reporting for injected data frames
  ath9k: enable 2GHz band only if the device supports it
  airo: Fix integer overflow warning
  rt2x00: Fix padding bug on L2PAD devices.
  WE: Fix set events not propagated
  b43legacy: avoid PPC fault during resume
  b43: avoid PPC fault during resume
  tcp: fix a timewait refcnt race
  ...

Fix up conflicts due to sysctl cleanups (dead sysctl_check code and
CTL_UNNUMBERED removed) in
	kernel/sysctl_check.c
	net/ipv4/sysctl_net_ipv4.c
	net/ipv6/addrconf.c
	net/sctp/sysctl.c

11 files changed, 1333 insertions, 1164 deletions

diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index d1e0563a67d..c1a42cfc80b 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2008 Intel Corporation.
+  Copyright(c) 1999 - 2009 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -43,10 +43,6 @@
  * 82583V Gigabit Network Connection
  */
 
-#include <linux/netdevice.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-
 #include "e1000.h"
 
 #define ID_LED_RESERVED_F746 0xF746
@@ -69,15 +65,15 @@ static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw);
 static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw);
 static s32 e1000_setup_link_82571(struct e1000_hw *hw);
 static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw);
+static void e1000_clear_vfta_82571(struct e1000_hw *hw);
 static bool e1000_check_mng_mode_82574(struct e1000_hw *hw);
 static s32 e1000_led_on_82574(struct e1000_hw *hw);
 static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw);
+static void e1000_power_down_phy_copper_82571(struct e1000_hw *hw);
 
 /**
  *  e1000_init_phy_params_82571 - Init PHY func ptrs.
  *  @hw: pointer to the HW structure
- *
- *  This is a function pointer entry point called by the api module.
  **/
 static s32 e1000_init_phy_params_82571(struct e1000_hw *hw)
 {
@@ -93,6 +89,9 @@ static s32 e1000_init_phy_params_82571(struct e1000_hw *hw)
 	phy->autoneg_mask		 = AUTONEG_ADVERTISE_SPEED_DEFAULT;
 	phy->reset_delay_us		 = 100;
 
+	phy->ops.power_up		 = e1000_power_up_phy_copper;
+	phy->ops.power_down		 = e1000_power_down_phy_copper_82571;
+
 	switch (hw->mac.type) {
 	case e1000_82571:
 	case e1000_82572:
@@ -140,8 +139,6 @@ static s32 e1000_init_phy_params_82571(struct e1000_hw *hw)
 /**
  *  e1000_init_nvm_params_82571 - Init NVM func ptrs.
  *  @hw: pointer to the HW structure
- *
- *  This is a function pointer entry point called by the api module.
  **/
 static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw)
 {
@@ -205,8 +202,6 @@ static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw)
 /**
  *  e1000_init_mac_params_82571 - Init MAC func ptrs.
  *  @hw: pointer to the HW structure
- *
- *  This is a function pointer entry point called by the api module.
  **/
 static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter)
 {
@@ -240,7 +235,8 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter)
 	/* Set rar entry count */
 	mac->rar_entry_count = E1000_RAR_ENTRIES;
 	/* Set if manageability features are enabled. */
-	mac->arc_subsystem_valid = (er32(FWSM) & E1000_FWSM_MODE_MASK) ? 1 : 0;
+	mac->arc_subsystem_valid = (er32(FWSM) & E1000_FWSM_MODE_MASK)
+	                ? true : false;
 
 	/* check for link */
 	switch (hw->phy.media_type) {
@@ -313,7 +309,7 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter)
 			 * indicates that the bootagent or EFI code has
 			 * improperly left this bit enabled
 			 */
-			hw_dbg(hw, "Please update your 82571 Bootagent\n");
+			e_dbg("Please update your 82571 Bootagent\n");
 		}
 		ew32(SWSM, swsm & ~E1000_SWSM_SMBI);
 	}
@@ -487,7 +483,7 @@ static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw)
 	}
 
 	if (i == sw_timeout) {
-		hw_dbg(hw, "Driver can't access device - SMBI bit is set.\n");
+		e_dbg("Driver can't access device - SMBI bit is set.\n");
 		hw->dev_spec.e82571.smb_counter++;
 	}
 	/* Get the FW semaphore. */
@@ -505,7 +501,7 @@ static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw)
 	if (i == fw_timeout) {
 		/* Release semaphores */
 		e1000_put_hw_semaphore_82571(hw);
-		hw_dbg(hw, "Driver can't access the NVM\n");
+		e_dbg("Driver can't access the NVM\n");
 		return -E1000_ERR_NVM;
 	}
 
@@ -702,8 +698,7 @@ static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset,
 				      u16 words, u16 *data)
 {
 	struct e1000_nvm_info *nvm = &hw->nvm;
-	u32 i;
-	u32 eewr = 0;
+	u32 i, eewr = 0;
 	s32 ret_val = 0;
 
 	/*
@@ -712,7 +707,7 @@ static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset,
 	 */
 	if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
 	    (words == 0)) {
-		hw_dbg(hw, "nvm parameter(s) out of bounds\n");
+		e_dbg("nvm parameter(s) out of bounds\n");
 		return -E1000_ERR_NVM;
 	}
 
@@ -753,7 +748,7 @@ static s32 e1000_get_cfg_done_82571(struct e1000_hw *hw)
 		timeout--;
 	}
 	if (!timeout) {
-		hw_dbg(hw, "MNG configuration cycle has not completed.\n");
+		e_dbg("MNG configuration cycle has not completed.\n");
 		return -E1000_ERR_RESET;
 	}
 
@@ -763,7 +758,7 @@ static s32 e1000_get_cfg_done_82571(struct e1000_hw *hw)
 /**
  *  e1000_set_d0_lplu_state_82571 - Set Low Power Linkup D0 state
  *  @hw: pointer to the HW structure
- *  @active: TRUE to enable LPLU, FALSE to disable
+ *  @active: true to enable LPLU, false to disable
  *
  *  Sets the LPLU D0 state according to the active flag.  When activating LPLU
  *  this function also disables smart speed and vice versa.  LPLU will not be
@@ -834,15 +829,11 @@ static s32 e1000_set_d0_lplu_state_82571(struct e1000_hw *hw, bool active)
  *  e1000_reset_hw_82571 - Reset hardware
  *  @hw: pointer to the HW structure
  *
- *  This resets the hardware into a known state.  This is a
- *  function pointer entry point called by the api module.
+ *  This resets the hardware into a known state.
  **/
 static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
 {
-	u32 ctrl;
-	u32 extcnf_ctrl;
-	u32 ctrl_ext;
-	u32 icr;
+	u32 ctrl, extcnf_ctrl, ctrl_ext, icr;
 	s32 ret_val;
 	u16 i = 0;
 
@@ -852,9 +843,9 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
 	 */
 	ret_val = e1000e_disable_pcie_master(hw);
 	if (ret_val)
-		hw_dbg(hw, "PCI-E Master disable polling has failed.\n");
+		e_dbg("PCI-E Master disable polling has failed.\n");
 
-	hw_dbg(hw, "Masking off all interrupts\n");
+	e_dbg("Masking off all interrupts\n");
 	ew32(IMC, 0xffffffff);
 
 	ew32(RCTL, 0);
@@ -893,7 +884,7 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
 
 	ctrl = er32(CTRL);
 
-	hw_dbg(hw, "Issuing a global reset to MAC\n");
+	e_dbg("Issuing a global reset to MAC\n");
 	ew32(CTRL, ctrl | E1000_CTRL_RST);
 
 	if (hw->nvm.type == e1000_nvm_flash_hw) {
@@ -951,21 +942,19 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw)
 	struct e1000_mac_info *mac = &hw->mac;
 	u32 reg_data;
 	s32 ret_val;
-	u16 i;
-	u16 rar_count = mac->rar_entry_count;
+	u16 i, rar_count = mac->rar_entry_count;
 
 	e1000_initialize_hw_bits_82571(hw);
 
 	/* Initialize identification LED */
 	ret_val = e1000e_id_led_init(hw);
-	if (ret_val) {
-		hw_dbg(hw, "Error initializing identification LED\n");
-		return ret_val;
-	}
+	if (ret_val)
+		e_dbg("Error initializing identification LED\n");
+		/* This is not fatal and we should not stop init due to this */
 
 	/* Disabling VLAN filtering */
-	hw_dbg(hw, "Initializing the IEEE VLAN\n");
-	e1000e_clear_vfta(hw);
+	e_dbg("Initializing the IEEE VLAN\n");
+	mac->ops.clear_vfta(hw);
 
 	/* Setup the receive address. */
 	/*
@@ -978,7 +967,7 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw)
 	e1000e_init_rx_addrs(hw, rar_count);
 
 	/* Zero out the Multicast HASH table */
-	hw_dbg(hw, "Zeroing the MTA\n");
+	e_dbg("Zeroing the MTA\n");
 	for (i = 0; i < mac->mta_reg_count; i++)
 		E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
 
@@ -1125,6 +1114,13 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw)
 		reg |= (1 << 22);
 		ew32(GCR, reg);
 
+		/*
+		 * Workaround for hardware errata.
+		 * apply workaround for hardware errata documented in errata
+		 * docs Fixes issue where some error prone or unreliable PCIe
+		 * completions are occurring, particularly with ASPM enabled.
+		 * Without fix, issue can cause tx timeouts.
+		 */
 		reg = er32(GCR2);
 		reg |= 1;
 		ew32(GCR2, reg);
@@ -1137,13 +1133,13 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw)
 }
 
 /**
- *  e1000e_clear_vfta - Clear VLAN filter table
+ *  e1000_clear_vfta_82571 - Clear VLAN filter table
  *  @hw: pointer to the HW structure
  *
  *  Clears the register array which contains the VLAN filter table by
  *  setting all the values to 0.
  **/
-void e1000e_clear_vfta(struct e1000_hw *hw)
+static void e1000_clear_vfta_82571(struct e1000_hw *hw)
 {
 	u32 offset;
 	u32 vfta_value = 0;
@@ -1360,8 +1356,20 @@ static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw)
  *  e1000_check_for_serdes_link_82571 - Check for link (Serdes)
  *  @hw: pointer to the HW structure
  *
- *  Checks for link up on the hardware.  If link is not up and we have
- *  a signal, then we need to force link up.
+ *  Reports the link state as up or down.
+ *
+ *  If autonegotiation is supported by the link partner, the link state is
+ *  determined by the result of autonegotiation. This is the most likely case.
+ *  If autonegotiation is not supported by the link partner, and the link
+ *  has a valid signal, force the link up.
+ *
+ *  The link state is represented internally here by 4 states:
+ *
+ *  1) down
+ *  2) autoneg_progress
+ *  3) autoneg_complete (the link sucessfully autonegotiated)
+ *  4) forced_up (the link has been forced up, it did not autonegotiate)
+ *
  **/
 static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
 {
@@ -1387,7 +1395,8 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
 				 */
 				mac->serdes_link_state =
 				    e1000_serdes_link_autoneg_progress;
-				hw_dbg(hw, "AN_UP     -> AN_PROG\n");
+				mac->serdes_has_link = false;
+				e_dbg("AN_UP     -> AN_PROG\n");
 			}
 		break;
 
@@ -1401,79 +1410,86 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
 			if (rxcw & E1000_RXCW_C) {
 				/* Enable autoneg, and unforce link up */
 				ew32(TXCW, mac->txcw);
-				ew32(CTRL,
-				    (ctrl & ~E1000_CTRL_SLU));
+				ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
 				mac->serdes_link_state =
 				    e1000_serdes_link_autoneg_progress;
-				hw_dbg(hw, "FORCED_UP -> AN_PROG\n");
+				mac->serdes_has_link = false;
+				e_dbg("FORCED_UP -> AN_PROG\n");
 			}
 			break;
 
 		case e1000_serdes_link_autoneg_progress:
-			/*
-			 * If the LU bit is set in the STATUS register,
-			 * autoneg has completed sucessfully. If not,
-			 * try foring the link because the far end may be
-			 * available but not capable of autonegotiation.
-			 */
-			if (status & E1000_STATUS_LU)  {
-				mac->serdes_link_state =
-				    e1000_serdes_link_autoneg_complete;
-				hw_dbg(hw, "AN_PROG   -> AN_UP\n");
+			if (rxcw & E1000_RXCW_C) {
+				/*
+				 * We received /C/ ordered sets, meaning the
+				 * link partner has autonegotiated, and we can
+				 * trust the Link Up (LU) status bit.
+				 */
+				if (status & E1000_STATUS_LU) {
+					mac->serdes_link_state =
+					    e1000_serdes_link_autoneg_complete;
+					e_dbg("AN_PROG   -> AN_UP\n");
+					mac->serdes_has_link = true;
+				} else {
+					/* Autoneg completed, but failed. */
+					mac->serdes_link_state =
+					    e1000_serdes_link_down;
+					e_dbg("AN_PROG   -> DOWN\n");
+				}
 			} else {
 				/*
-				 * Disable autoneg, force link up and
-				 * full duplex, and change state to forced
+				 * The link partner did not autoneg.
+				 * Force link up and full duplex, and change
+				 * state to forced.
 				 */
-				ew32(TXCW,
-				    (mac->txcw & ~E1000_TXCW_ANE));
+				ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE));
 				ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD);
 				ew32(CTRL, ctrl);
 
 				/* Configure Flow Control after link up. */
-				ret_val =
-				    e1000e_config_fc_after_link_up(hw);
+				ret_val = e1000e_config_fc_after_link_up(hw);
 				if (ret_val) {
-					hw_dbg(hw, "Error config flow control\n");
+					e_dbg("Error config flow control\n");
 					break;
 				}
 				mac->serdes_link_state =
 				    e1000_serdes_link_forced_up;
-				hw_dbg(hw, "AN_PROG   -> FORCED_UP\n");
+				mac->serdes_has_link = true;
+				e_dbg("AN_PROG   -> FORCED_UP\n");
 			}
-			mac->serdes_has_link = true;
 			break;
 
 		case e1000_serdes_link_down:
 		default:
-			/* The link was down but the receiver has now gained
+			/*
+			 * The link was down but the receiver has now gained
 			 * valid sync, so lets see if we can bring the link
-			 * up. */
+			 * up.
+			 */
 			ew32(TXCW, mac->txcw);
-			ew32(CTRL,
-			    (ctrl & ~E1000_CTRL_SLU));
+			ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
 			mac->serdes_link_state =
 			    e1000_serdes_link_autoneg_progress;
-			hw_dbg(hw, "DOWN      -> AN_PROG\n");
+			e_dbg("DOWN      -> AN_PROG\n");
 			break;
 		}
 	} else {
 		if (!(rxcw & E1000_RXCW_SYNCH)) {
 			mac->serdes_has_link = false;
 			mac->serdes_link_state = e1000_serdes_link_down;
-			hw_dbg(hw, "ANYSTATE  -> DOWN\n");
+			e_dbg("ANYSTATE  -> DOWN\n");
 		} else {
 			/*
-			 * We have sync, and can tolerate one
-			 * invalid (IV) codeword before declaring
-			 * link down, so reread to look again
+			 * We have sync, and can tolerate one invalid (IV)
+			 * codeword before declaring link down, so reread
+			 * to look again.
 			 */
 			udelay(10);
 			rxcw = er32(RXCW);
 			if (rxcw & E1000_RXCW_IV) {
 				mac->serdes_link_state = e1000_serdes_link_down;
 				mac->serdes_has_link = false;
-				hw_dbg(hw, "ANYSTATE  -> DOWN\n");
+				e_dbg("ANYSTATE  -> DOWN\n");
 			}
 		}
 	}
@@ -1495,7 +1511,7 @@ static s32 e1000_valid_led_default_82571(struct e1000_hw *hw, u16 *data)
 
 	ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data);
 	if (ret_val) {
-		hw_dbg(hw, "NVM Read Error\n");
+		e_dbg("NVM Read Error\n");
 		return ret_val;
 	}
 
@@ -1525,7 +1541,7 @@ static s32 e1000_valid_led_default_82571(struct e1000_hw *hw, u16 *data)
 bool e1000e_get_laa_state_82571(struct e1000_hw *hw)
 {
 	if (hw->mac.type != e1000_82571)
-		return 0;
+		return false;
 
 	return hw->dev_spec.e82571.laa_is_present;
 }
@@ -1535,7 +1551,7 @@ bool e1000e_get_laa_state_82571(struct e1000_hw *hw)
  *  @hw: pointer to the HW structure
  *  @state: enable/disable locally administered address
  *
- *  Enable/Disable the current locally administers address state.
+ *  Enable/Disable the current locally administered address state.
  **/
 void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state)
 {
@@ -1609,6 +1625,28 @@ static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw)
 }
 
 /**
+ * e1000_power_down_phy_copper_82571 - Remove link during PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, or wake on lan is not enabled, remove the link.
+ **/
+static void e1000_power_down_phy_copper_82571(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	struct e1000_mac_info *mac = &hw->mac;
+
+	if (!(phy->ops.check_reset_block))
+		return;
+
+	/* If the management interface is not enabled, then power down */
+	if (!(mac->ops.check_mng_mode(hw) || phy->ops.check_reset_block(hw)))
+		e1000_power_down_phy_copper(hw);
+
+	return;
+}
+
+/**
  *  e1000_clear_hw_cntrs_82571 - Clear device specific hardware counters
  *  @hw: pointer to the HW structure
  *
@@ -1616,44 +1654,42 @@ static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw)
  **/
 static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw)
 {
-	u32 temp;
-
 	e1000e_clear_hw_cntrs_base(hw);
 
-	temp = er32(PRC64);
-	temp = er32(PRC127);
-	temp = er32(PRC255);
-	temp = er32(PRC511);
-	temp = er32(PRC1023);
-	temp = er32(PRC1522);
-	temp = er32(PTC64);
-	temp = er32(PTC127);
-	temp = er32(PTC255);
-	temp = er32(PTC511);
-	temp = er32(PTC1023);
-	temp = er32(PTC1522);
-
-	temp = er32(ALGNERRC);
-	temp = er32(RXERRC);
-	temp = er32(TNCRS);
-	temp = er32(CEXTERR);
-	temp = er32(TSCTC);
-	temp = er32(TSCTFC);
-
-	temp = er32(MGTPRC);
-	temp = er32(MGTPDC);
-	temp = er32(MGTPTC);
-
-	temp = er32(IAC);
-	temp = er32(ICRXOC);
-
-	temp = er32(ICRXPTC);
-	temp = er32(ICRXATC);
-	temp = er32(ICTXPTC);
-	temp = er32(ICTXATC);
-	temp = er32(ICTXQEC);
-	temp = er32(ICTXQMTC);
-	temp = er32(ICRXDMTC);
+	er32(PRC64);
+	er32(PRC127);
+	er32(PRC255);
+	er32(PRC511);
+	er32(PRC1023);
+	er32(PRC1522);
+	er32(PTC64);
+	er32(PTC127);
+	er32(PTC255);
+	er32(PTC511);
+	er32(PTC1023);
+	er32(PTC1522);
+
+	er32(ALGNERRC);
+	er32(RXERRC);
+	er32(TNCRS);
+	er32(CEXTERR);
+	er32(TSCTC);
+	er32(TSCTFC);
+
+	er32(MGTPRC);
+	er32(MGTPDC);
+	er32(MGTPTC);
+
+	er32(IAC);
+	er32(ICRXOC);
+
+	er32(ICRXPTC);
+	er32(ICRXATC);
+	er32(ICTXPTC);
+	er32(ICTXATC);
+	er32(ICTXQEC);
+	er32(ICTXQMTC);
+	er32(ICRXDMTC);
 }
 
 static struct e1000_mac_operations e82571_mac_ops = {
@@ -1667,6 +1703,8 @@ static struct e1000_mac_operations e82571_mac_ops = {
 	/* .led_on: mac type dependent */
 	.led_off		= e1000e_led_off_generic,
 	.update_mc_addr_list	= e1000_update_mc_addr_list_82571,
+	.write_vfta		= e1000_write_vfta_generic,
+	.clear_vfta		= e1000_clear_vfta_82571,
 	.reset_hw		= e1000_reset_hw_82571,
 	.init_hw		= e1000_init_hw_82571,
 	.setup_link		= e1000_setup_link_82571,
@@ -1675,64 +1713,67 @@ static struct e1000_mac_operations e82571_mac_ops = {
 };
 
 static struct e1000_phy_operations e82_phy_ops_igp = {
-	.acquire_phy		= e1000_get_hw_semaphore_82571,
+	.acquire		= e1000_get_hw_semaphore_82571,
+	.check_polarity		= e1000_check_polarity_igp,
 	.check_reset_block	= e1000e_check_reset_block_generic,
-	.commit_phy		= NULL,
+	.commit			= NULL,
 	.force_speed_duplex	= e1000e_phy_force_speed_duplex_igp,
 	.get_cfg_done		= e1000_get_cfg_done_82571,
 	.get_cable_length	= e1000e_get_cable_length_igp_2,
-	.get_phy_info		= e1000e_get_phy_info_igp,
-	.read_phy_reg		= e1000e_read_phy_reg_igp,
-	.release_phy		= e1000_put_hw_semaphore_82571,
-	.reset_phy		= e1000e_phy_hw_reset_generic,
+	.get_info		= e1000e_get_phy_info_igp,
+	.read_reg		= e1000e_read_phy_reg_igp,
+	.release		= e1000_put_hw_semaphore_82571,
+	.reset			= e1000e_phy_hw_reset_generic,
 	.set_d0_lplu_state	= e1000_set_d0_lplu_state_82571,
 	.set_d3_lplu_state	= e1000e_set_d3_lplu_state,
-	.write_phy_reg		= e1000e_write_phy_reg_igp,
+	.write_reg		= e1000e_write_phy_reg_igp,
 	.cfg_on_link_up      	= NULL,
 };
 
 static struct e1000_phy_operations e82_phy_ops_m88 = {
-	.acquire_phy		= e1000_get_hw_semaphore_82571,
+	.acquire		= e1000_get_hw_semaphore_82571,
+	.check_polarity		= e1000_check_polarity_m88,
 	.check_reset_block	= e1000e_check_reset_block_generic,
-	.commit_phy		= e1000e_phy_sw_reset,
+	.commit			= e1000e_phy_sw_reset,
 	.force_speed_duplex	= e1000e_phy_force_speed_duplex_m88,
 	.get_cfg_done		= e1000e_get_cfg_done,
 	.get_cable_length	= e1000e_get_cable_length_m88,
-	.get_phy_info		= e1000e_get_phy_info_m88,
-	.read_phy_reg		= e1000e_read_phy_reg_m88,
-	.release_phy		= e1000_put_hw_semaphore_82571,
-	.reset_phy		= e1000e_phy_hw_reset_generic,
+	.get_info		= e1000e_get_phy_info_m88,
+	.read_reg		= e1000e_read_phy_reg_m88,
+	.release		= e1000_put_hw_semaphore_82571,
+	.reset			= e1000e_phy_hw_reset_generic,
 	.set_d0_lplu_state	= e1000_set_d0_lplu_state_82571,
 	.set_d3_lplu_state	= e1000e_set_d3_lplu_state,
-	.write_phy_reg		= e1000e_write_phy_reg_m88,
+	.write_reg		= e1000e_write_phy_reg_m88,
 	.cfg_on_link_up      	= NULL,
 };
 
 static struct e1000_phy_operations e82_phy_ops_bm = {
-	.acquire_phy		= e1000_get_hw_semaphore_82571,
+	.acquire		= e1000_get_hw_semaphore_82571,
+	.check_polarity		= e1000_check_polarity_m88,
 	.check_reset_block	= e1000e_check_reset_block_generic,
-	.commit_phy		= e1000e_phy_sw_reset,
+	.commit			= e1000e_phy_sw_reset,
 	.force_speed_duplex	= e1000e_phy_force_speed_duplex_m88,
 	.get_cfg_done		= e1000e_get_cfg_done,
 	.get_cable_length	= e1000e_get_cable_length_m88,
-	.get_phy_info		= e1000e_get_phy_info_m88,
-	.read_phy_reg		= e1000e_read_phy_reg_bm2,
-	.release_phy		= e1000_put_hw_semaphore_82571,
-	.reset_phy		= e1000e_phy_hw_reset_generic,
+	.get_info		= e1000e_get_phy_info_m88,
+	.read_reg		= e1000e_read_phy_reg_bm2,
+	.release		= e1000_put_hw_semaphore_82571,
+	.reset			= e1000e_phy_hw_reset_generic,
 	.set_d0_lplu_state	= e1000_set_d0_lplu_state_82571,
 	.set_d3_lplu_state	= e1000e_set_d3_lplu_state,
-	.write_phy_reg		= e1000e_write_phy_reg_bm2,
+	.write_reg		= e1000e_write_phy_reg_bm2,
 	.cfg_on_link_up      	= NULL,
 };
 
 static struct e1000_nvm_operations e82571_nvm_ops = {
-	.acquire_nvm		= e1000_acquire_nvm_82571,
-	.read_nvm		= e1000e_read_nvm_eerd,
-	.release_nvm		= e1000_release_nvm_82571,
-	.update_nvm		= e1000_update_nvm_checksum_82571,
+	.acquire		= e1000_acquire_nvm_82571,
+	.read			= e1000e_read_nvm_eerd,
+	.release		= e1000_release_nvm_82571,
+	.update			= e1000_update_nvm_checksum_82571,
 	.valid_led_default	= e1000_valid_led_default_82571,
-	.validate_nvm		= e1000_validate_nvm_checksum_82571,
-	.write_nvm		= e1000_write_nvm_82571,
+	.validate		= e1000_validate_nvm_checksum_82571,
+	.write			= e1000_write_nvm_82571,
 };
 
 struct e1000_info e1000_82571_info = {
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index 1190167a8b3..86d2809763c 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2008 Intel Corporation.
+  Copyright(c) 1999 - 2009 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 3e187b0e420..cebbd9079d5 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2008 Intel Corporation.
+  Copyright(c) 1999 - 2009 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -36,6 +36,7 @@
 #include <linux/workqueue.h>
 #include <linux/io.h>
 #include <linux/netdevice.h>
+#include <linux/pci.h>
 
 #include "hw.h"
 
@@ -47,9 +48,9 @@ struct e1000_info;
 
 #ifdef DEBUG
 #define e_dbg(format, arg...) \
-	e_printk(KERN_DEBUG , adapter, format, ## arg)
+	e_printk(KERN_DEBUG , hw->adapter, format, ## arg)
 #else
-#define e_dbg(format, arg...) do { (void)(adapter); } while (0)
+#define e_dbg(format, arg...) do { (void)(hw); } while (0)
 #endif
 
 #define e_err(format, arg...) \
@@ -193,12 +194,15 @@ struct e1000_buffer {
 			unsigned long time_stamp;
 			u16 length;
 			u16 next_to_watch;
+			u16 mapped_as_page;
 		};
 		/* Rx */
-		/* arrays of page information for packet split */
-		struct e1000_ps_page *ps_pages;
+		struct {
+			/* arrays of page information for packet split */
+			struct e1000_ps_page *ps_pages;
+			struct page *page;
+		};
 	};
-	struct page *page;
 };
 
 struct e1000_ring {
@@ -331,7 +335,6 @@ struct e1000_adapter {
 	/* OS defined structs */
 	struct net_device *netdev;
 	struct pci_dev *pdev;
-	struct net_device_stats net_stats;
 
 	/* structs defined in e1000_hw.h */
 	struct e1000_hw hw;
@@ -366,6 +369,7 @@ struct e1000_adapter {
 	struct work_struct downshift_task;
 	struct work_struct update_phy_task;
 	struct work_struct led_blink_task;
+	struct work_struct print_hang_task;
 };
 
 struct e1000_info {
@@ -488,6 +492,7 @@ extern void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
 extern void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw);
 extern void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw);
 extern void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw);
+extern s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable);
 
 extern s32 e1000e_check_for_copper_link(struct e1000_hw *hw);
 extern s32 e1000e_check_for_fiber_link(struct e1000_hw *hw);
@@ -507,7 +512,7 @@ extern s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw);
 extern s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw);
 extern s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw);
 extern s32 e1000e_setup_link(struct e1000_hw *hw);
-extern void e1000e_clear_vfta(struct e1000_hw *hw);
+extern void e1000_clear_vfta_generic(struct e1000_hw *hw);
 extern void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count);
 extern void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw,
 					       u8 *mc_addr_list,
@@ -523,7 +528,7 @@ extern void e1000e_config_collision_dist(struct e1000_hw *hw);
 extern s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw);
 extern s32 e1000e_force_mac_fc(struct e1000_hw *hw);
 extern s32 e1000e_blink_led(struct e1000_hw *hw);
-extern void e1000e_write_vfta(struct e1000_hw *hw, u32 offset, u32 value);
+extern void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value);
 extern void e1000e_reset_adaptive(struct e1000_hw *hw);
 extern void e1000e_update_adaptive(struct e1000_hw *hw);
 
@@ -566,6 +571,8 @@ extern s32 e1000e_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset,
 extern s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
 			       u32 usec_interval, bool *success);
 extern s32 e1000e_phy_reset_dsp(struct e1000_hw *hw);
+extern void e1000_power_up_phy_copper(struct e1000_hw *hw);
+extern void e1000_power_down_phy_copper(struct e1000_hw *hw);
 extern s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data);
 extern s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
 extern s32 e1000e_check_downshift(struct e1000_hw *hw);
@@ -583,9 +590,15 @@ extern s32 e1000_get_phy_info_82577(struct e1000_hw *hw);
 extern s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw);
 extern s32 e1000_get_cable_length_82577(struct e1000_hw *hw);
 
+extern s32 e1000_check_polarity_m88(struct e1000_hw *hw);
+extern s32 e1000_get_phy_info_ife(struct e1000_hw *hw);
+extern s32 e1000_check_polarity_ife(struct e1000_hw *hw);
+extern s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw);
+extern s32 e1000_check_polarity_igp(struct e1000_hw *hw);
+
 static inline s32 e1000_phy_hw_reset(struct e1000_hw *hw)
 {
-	return hw->phy.ops.reset_phy(hw);
+	return hw->phy.ops.reset(hw);
 }
 
 static inline s32 e1000_check_reset_block(struct e1000_hw *hw)
@@ -595,12 +608,12 @@ static inline s32 e1000_check_reset_block(struct e1000_hw *hw)
 
 static inline s32 e1e_rphy(struct e1000_hw *hw, u32 offset, u16 *data)
 {
-	return hw->phy.ops.read_phy_reg(hw, offset, data);
+	return hw->phy.ops.read_reg(hw, offset, data);
 }
 
 static inline s32 e1e_wphy(struct e1000_hw *hw, u32 offset, u16 data)
 {
-	return hw->phy.ops.write_phy_reg(hw, offset, data);
+	return hw->phy.ops.write_reg(hw, offset, data);
 }
 
 static inline s32 e1000_get_cable_length(struct e1000_hw *hw)
@@ -620,27 +633,27 @@ extern s32 e1000e_read_mac_addr(struct e1000_hw *hw);
 
 static inline s32 e1000_validate_nvm_checksum(struct e1000_hw *hw)
 {
-	return hw->nvm.ops.validate_nvm(hw);
+	return hw->nvm.ops.validate(hw);
 }
 
 static inline s32 e1000e_update_nvm_checksum(struct e1000_hw *hw)
 {
-	return hw->nvm.ops.update_nvm(hw);
+	return hw->nvm.ops.update(hw);
 }
 
 static inline s32 e1000_read_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
 {
-	return hw->nvm.ops.read_nvm(hw, offset, words, data);
+	return hw->nvm.ops.read(hw, offset, words, data);
 }
 
 static inline s32 e1000_write_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
 {
-	return hw->nvm.ops.write_nvm(hw, offset, words, data);
+	return hw->nvm.ops.write(hw, offset, words, data);
 }
 
 static inline s32 e1000_get_phy_info(struct e1000_hw *hw)
 {
-	return hw->phy.ops.get_phy_info(hw);
+	return hw->phy.ops.get_info(hw);
 }
 
 static inline s32 e1000e_check_mng_mode(struct e1000_hw *hw)
diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c
index ae5d7368935..d2a10479460 100644
--- a/drivers/net/e1000e/es2lan.c
+++ b/drivers/net/e1000e/es2lan.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2008 Intel Corporation.
+  Copyright(c) 1999 - 2009 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -31,11 +31,6 @@
  * 80003ES2LAN Gigabit Ethernet Controller (Serdes)
  */
 
-#include <linux/netdevice.h>
-#include <linux/ethtool.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-
 #include "e1000.h"
 
 #define E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL	 0x00
@@ -104,6 +99,8 @@
  */
 static const u16 e1000_gg82563_cable_length_table[] =
 	 { 0, 60, 115, 150, 150, 60, 115, 150, 180, 180, 0xFF };
+#define GG82563_CABLE_LENGTH_TABLE_SIZE \
+		ARRAY_SIZE(e1000_gg82563_cable_length_table)
 
 static s32 e1000_setup_copper_link_80003es2lan(struct e1000_hw *hw);
 static s32 e1000_acquire_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask);
@@ -117,12 +114,11 @@ static s32  e1000_read_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
                                             u16 *data);
 static s32  e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
                                              u16 data);
+static void e1000_power_down_phy_copper_80003es2lan(struct e1000_hw *hw);
 
 /**
  *  e1000_init_phy_params_80003es2lan - Init ESB2 PHY func ptrs.
  *  @hw: pointer to the HW structure
- *
- *  This is a function pointer entry point called by the api module.
  **/
 static s32 e1000_init_phy_params_80003es2lan(struct e1000_hw *hw)
 {
@@ -132,6 +128,9 @@ static s32 e1000_init_phy_params_80003es2lan(struct e1000_hw *hw)
 	if (hw->phy.media_type != e1000_media_type_copper) {
 		phy->type	= e1000_phy_none;
 		return 0;
+	} else {
+		phy->ops.power_up = e1000_power_up_phy_copper;
+		phy->ops.power_down = e1000_power_down_phy_copper_80003es2lan;
 	}
 
 	phy->addr		= 1;
@@ -152,8 +151,6 @@ static s32 e1000_init_phy_params_80003es2lan(struct e1000_hw *hw)
 /**
  *  e1000_init_nvm_params_80003es2lan - Init ESB2 NVM func ptrs.
  *  @hw: pointer to the HW structure
- *
- *  This is a function pointer entry point called by the api module.
  **/
 static s32 e1000_init_nvm_params_80003es2lan(struct e1000_hw *hw)
 {
@@ -200,8 +197,6 @@ static s32 e1000_init_nvm_params_80003es2lan(struct e1000_hw *hw)
 /**
  *  e1000_init_mac_params_80003es2lan - Init ESB2 MAC func ptrs.
  *  @hw: pointer to the HW structure
- *
- *  This is a function pointer entry point called by the api module.
  **/
 static s32 e1000_init_mac_params_80003es2lan(struct e1000_adapter *adapter)
 {
@@ -224,7 +219,8 @@ static s32 e1000_init_mac_params_80003es2lan(struct e1000_adapter *adapter)
 	/* Set rar entry count */
 	mac->rar_entry_count = E1000_RAR_ENTRIES;
 	/* Set if manageability features are enabled. */
-	mac->arc_subsystem_valid = (er32(FWSM) & E1000_FWSM_MODE_MASK) ? 1 : 0;
+	mac->arc_subsystem_valid = (er32(FWSM) & E1000_FWSM_MODE_MASK)
+                        ? true : false;
 
 	/* check for link */
 	switch (hw->phy.media_type) {
@@ -272,8 +268,7 @@ static s32 e1000_get_variants_80003es2lan(struct e1000_adapter *adapter)
  *  e1000_acquire_phy_80003es2lan - Acquire rights to access PHY
  *  @hw: pointer to the HW structure
  *
- *  A wrapper to acquire access rights to the correct PHY.  This is a
- *  function pointer entry point called by the api module.
+ *  A wrapper to acquire access rights to the correct PHY.
  **/
 static s32 e1000_acquire_phy_80003es2lan(struct e1000_hw *hw)
 {
@@ -287,8 +282,7 @@ static s32 e1000_acquire_phy_80003es2lan(struct e1000_hw *hw)
  *  e1000_release_phy_80003es2lan - Release rights to access PHY
  *  @hw: pointer to the HW structure
  *
- *  A wrapper to release access rights to the correct PHY.  This is a
- *  function pointer entry point called by the api module.
+ *  A wrapper to release access rights to the correct PHY.
  **/
 static void e1000_release_phy_80003es2lan(struct e1000_hw *hw)
 {
@@ -333,8 +327,7 @@ static void e1000_release_mac_csr_80003es2lan(struct e1000_hw *hw)
  *  e1000_acquire_nvm_80003es2lan - Acquire rights to access NVM
  *  @hw: pointer to the HW structure
  *
- *  Acquire the semaphore to access the EEPROM.  This is a function
- *  pointer entry point called by the api module.
+ *  Acquire the semaphore to access the EEPROM.
  **/
 static s32 e1000_acquire_nvm_80003es2lan(struct e1000_hw *hw)
 {
@@ -356,8 +349,7 @@ static s32 e1000_acquire_nvm_80003es2lan(struct e1000_hw *hw)
  *  e1000_release_nvm_80003es2lan - Relinquish rights to access NVM
  *  @hw: pointer to the HW structure
  *
- *  Release the semaphore used to access the EEPROM.  This is a
- *  function pointer entry point called by the api module.
+ *  Release the semaphore used to access the EEPROM.
  **/
 static void e1000_release_nvm_80003es2lan(struct e1000_hw *hw)
 {
@@ -399,8 +391,7 @@ static s32 e1000_acquire_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask)
 	}
 
 	if (i == timeout) {
-		hw_dbg(hw,
-		       "Driver can't access resource, SW_FW_SYNC timeout.\n");
+		e_dbg("Driver can't access resource, SW_FW_SYNC timeout.\n");
 		return -E1000_ERR_SWFW_SYNC;
 	}
 
@@ -440,8 +431,7 @@ static void e1000_release_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask)
  *  @offset: offset of the register to read
  *  @data: pointer to the data returned from the operation
  *
- *  Read the GG82563 PHY register.  This is a function pointer entry
- *  point called by the api module.
+ *  Read the GG82563 PHY register.
  **/
 static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
 						  u32 offset, u16 *data)
@@ -505,8 +495,7 @@ static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
  *  @offset: offset of the register to read
  *  @data: value to write to the register
  *
- *  Write to the GG82563 PHY register.  This is a function pointer entry
- *  point called by the api module.
+ *  Write to the GG82563 PHY register.
  **/
 static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
 						   u32 offset, u16 data)
@@ -571,8 +560,7 @@ static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
  *  @words: number of words to write
  *  @data: buffer of data to write to the NVM
  *
- *  Write "words" of data to the ESB2 NVM.  This is a function
- *  pointer entry point called by the api module.
+ *  Write "words" of data to the ESB2 NVM.
  **/
 static s32 e1000_write_nvm_80003es2lan(struct e1000_hw *hw, u16 offset,
 				       u16 words, u16 *data)
@@ -602,7 +590,7 @@ static s32 e1000_get_cfg_done_80003es2lan(struct e1000_hw *hw)
 		timeout--;
 	}
 	if (!timeout) {
-		hw_dbg(hw, "MNG configuration cycle has not completed.\n");
+		e_dbg("MNG configuration cycle has not completed.\n");
 		return -E1000_ERR_RESET;
 	}
 
@@ -635,7 +623,7 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw)
 	if (ret_val)
 		return ret_val;
 
-	hw_dbg(hw, "GG82563 PSCR: %X\n", phy_data);
+	e_dbg("GG82563 PSCR: %X\n", phy_data);
 
 	ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data);
 	if (ret_val)
@@ -653,7 +641,7 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw)
 	udelay(1);
 
 	if (hw->phy.autoneg_wait_to_complete) {
-		hw_dbg(hw, "Waiting for forced speed/duplex link "
+		e_dbg("Waiting for forced speed/duplex link "
 			 "on GG82563 phy.\n");
 
 		ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
@@ -712,21 +700,27 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw)
 static s32 e1000_get_cable_length_80003es2lan(struct e1000_hw *hw)
 {
 	struct e1000_phy_info *phy = &hw->phy;
-	s32 ret_val;
-	u16 phy_data;
-	u16 index;
+	s32 ret_val = 0;
+	u16 phy_data, index;
 
 	ret_val = e1e_rphy(hw, GG82563_PHY_DSP_DISTANCE, &phy_data);
 	if (ret_val)
-		return ret_val;
+		goto out;
 
 	index = phy_data & GG82563_DSPD_CABLE_LENGTH;
+
+	if (index >= GG82563_CABLE_LENGTH_TABLE_SIZE - 5) {
+		ret_val = -E1000_ERR_PHY;
+		goto out;
+	}
+
 	phy->min_cable_length = e1000_gg82563_cable_length_table[index];
-	phy->max_cable_length = e1000_gg82563_cable_length_table[index+5];
+	phy->max_cable_length = e1000_gg82563_cable_length_table[index + 5];
 
 	phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
 
-	return 0;
+out:
+	return ret_val;
 }
 
 /**
@@ -736,7 +730,6 @@ static s32 e1000_get_cable_length_80003es2lan(struct e1000_hw *hw)
  *  @duplex: pointer to duplex buffer
  *
  *  Retrieve the current speed and duplex configuration.
- *  This is a function pointer entry point called by the api module.
  **/
 static s32 e1000_get_link_up_info_80003es2lan(struct e1000_hw *hw, u16 *speed,
 					      u16 *duplex)
@@ -762,12 +755,10 @@ static s32 e1000_get_link_up_info_80003es2lan(struct e1000_hw *hw, u16 *speed,
  *  @hw: pointer to the HW structure
  *
  *  Perform a global reset to the ESB2 controller.
- *  This is a function pointer entry point called by the api module.
  **/
 static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw)
 {
-	u32 ctrl;
-	u32 icr;
+	u32 ctrl, icr;
 	s32 ret_val;
 
 	/*
@@ -776,9 +767,9 @@ static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw)
 	 */
 	ret_val = e1000e_disable_pcie_master(hw);
 	if (ret_val)
-		hw_dbg(hw, "PCI-E Master disable polling has failed.\n");
+		e_dbg("PCI-E Master disable polling has failed.\n");
 
-	hw_dbg(hw, "Masking off all interrupts\n");
+	e_dbg("Masking off all interrupts\n");
 	ew32(IMC, 0xffffffff);
 
 	ew32(RCTL, 0);
@@ -790,7 +781,7 @@ static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw)
 	ctrl = er32(CTRL);
 
 	ret_val = e1000_acquire_phy_80003es2lan(hw);
-	hw_dbg(hw, "Issuing a global reset to MAC\n");
+	e_dbg("Issuing a global reset to MAC\n");
 	ew32(CTRL, ctrl | E1000_CTRL_RST);
 	e1000_release_phy_80003es2lan(hw);
 
@@ -811,7 +802,6 @@ static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw)
  *  @hw: pointer to the HW structure
  *
  *  Initialize the hw bits, LED, VFTA, MTA, link and hw counters.
- *  This is a function pointer entry point called by the api module.
  **/
 static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw)
 {
@@ -824,20 +814,19 @@ static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw)
 
 	/* Initialize identification LED */
 	ret_val = e1000e_id_led_init(hw);
-	if (ret_val) {
-		hw_dbg(hw, "Error initializing identification LED\n");
-		return ret_val;
-	}
+	if (ret_val)
+		e_dbg("Error initializing identification LED\n");
+		/* This is not fatal and we should not stop init due to this */
 
 	/* Disabling VLAN filtering */
-	hw_dbg(hw, "Initializing the IEEE VLAN\n");
-	e1000e_clear_vfta(hw);
+	e_dbg("Initializing the IEEE VLAN\n");
+	mac->ops.clear_vfta(hw);
 
 	/* Setup the receive address. */
 	e1000e_init_rx_addrs(hw, mac->rar_entry_count);
 
 	/* Zero out the Multicast HASH table */
-	hw_dbg(hw, "Zeroing the MTA\n");
+	e_dbg("Zeroing the MTA\n");
 	for (i = 0; i < mac->mta_reg_count; i++)
 		E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
 
@@ -994,7 +983,7 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
 	/* SW Reset the PHY so all changes take effect */
 	ret_val = e1000e_commit_phy(hw);
 	if (ret_val) {
-		hw_dbg(hw, "Error Resetting the PHY\n");
+		e_dbg("Error Resetting the PHY\n");
 		return ret_val;
 	}
 
@@ -1318,6 +1307,23 @@ static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
 }
 
 /**
+ * e1000_power_down_phy_copper_80003es2lan - Remove link during PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, or wake on lan is not enabled, remove the link.
+ **/
+static void e1000_power_down_phy_copper_80003es2lan(struct e1000_hw *hw)
+{
+	/* If the management interface is not enabled, then power down */
+	if (!(hw->mac.ops.check_mng_mode(hw) ||
+	      hw->phy.ops.check_reset_block(hw)))
+		e1000_power_down_phy_copper(hw);
+
+	return;
+}
+
+/**
  *  e1000_clear_hw_cntrs_80003es2lan - Clear device specific hardware counters
  *  @hw: pointer to the HW structure
  *
@@ -1325,44 +1331,42 @@ static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
  **/
 static void e1000_clear_hw_cntrs_80003es2lan(struct e1000_hw *hw)
 {
-	u32 temp;
-
 	e1000e_clear_hw_cntrs_base(hw);
 
-	temp = er32(PRC64);
-	temp = er32(PRC127);
-	temp = er32(PRC255);
-	temp = er32(PRC511);
-	temp = er32(PRC1023);
-	temp = er32(PRC1522);
-	temp = er32(PTC64);
-	temp = er32(PTC127);
-	temp = er32(PTC255);
-	temp = er32(PTC511);
-	temp = er32(PTC1023);
-	temp = er32(PTC1522);
-
-	temp = er32(ALGNERRC);
-	temp = er32(RXERRC);
-	temp = er32(TNCRS);
-	temp = er32(CEXTERR);
-	temp = er32(TSCTC);
-	temp = er32(TSCTFC);
-
-	temp = er32(MGTPRC);
-	temp = er32(MGTPDC);
-	temp = er32(MGTPTC);
-
-	temp = er32(IAC);
-	temp = er32(ICRXOC);
-
-	temp = er32(ICRXPTC);
-	temp = er32(ICRXATC);
-	temp = er32(ICTXPTC);
-	temp = er32(ICTXATC);
-	temp = er32(ICTXQEC);
-	temp = er32(ICTXQMTC);
-	temp = er32(ICRXDMTC);
+	er32(PRC64);
+	er32(PRC127);
+	er32(PRC255);
+	er32(PRC511);
+	er32(PRC1023);
+	er32(PRC1522);
+	er32(PTC64);
+	er32(PTC127);
+	er32(PTC255);
+	er32(PTC511);
+	er32(PTC1023);
+	er32(PTC1522);
+
+	er32(ALGNERRC);
+	er32(RXERRC);
+	er32(TNCRS);
+	er32(CEXTERR);
+	er32(TSCTC);
+	er32(TSCTFC);
+
+	er32(MGTPRC);
+	er32(MGTPDC);
+	er32(MGTPTC);
+
+	er32(IAC);
+	er32(ICRXOC);
+
+	er32(ICRXPTC);
+	er32(ICRXATC);
+	er32(ICTXPTC);
+	er32(ICTXATC);
+	er32(ICTXQEC);
+	er32(ICTXQMTC);
+	er32(ICRXDMTC);
 }
 
 static struct e1000_mac_operations es2_mac_ops = {
@@ -1376,6 +1380,8 @@ static struct e1000_mac_operations es2_mac_ops = {
 	.led_on			= e1000e_led_on_generic,
 	.led_off		= e1000e_led_off_generic,
 	.update_mc_addr_list	= e1000e_update_mc_addr_list_generic,
+	.write_vfta		= e1000_write_vfta_generic,
+	.clear_vfta		= e1000_clear_vfta_generic,
 	.reset_hw		= e1000_reset_hw_80003es2lan,
 	.init_hw		= e1000_init_hw_80003es2lan,
 	.setup_link		= e1000e_setup_link,
@@ -1384,30 +1390,31 @@ static struct e1000_mac_operations es2_mac_ops = {
 };
 
 static struct e1000_phy_operations es2_phy_ops = {
-	.acquire_phy		= e1000_acquire_phy_80003es2lan,
+	.acquire		= e1000_acquire_phy_80003es2lan,
+	.check_polarity		= e1000_check_polarity_m88,
 	.check_reset_block	= e1000e_check_reset_block_generic,
-	.commit_phy	 	= e1000e_phy_sw_reset,
+	.commit		 	= e1000e_phy_sw_reset,
 	.force_speed_duplex 	= e1000_phy_force_speed_duplex_80003es2lan,
 	.get_cfg_done       	= e1000_get_cfg_done_80003es2lan,
 	.get_cable_length   	= e1000_get_cable_length_80003es2lan,
-	.get_phy_info       	= e1000e_get_phy_info_m88,
-	.read_phy_reg       	= e1000_read_phy_reg_gg82563_80003es2lan,
-	.release_phy		= e1000_release_phy_80003es2lan,
-	.reset_phy	  	= e1000e_phy_hw_reset_generic,
+	.get_info       	= e1000e_get_phy_info_m88,
+	.read_reg       	= e1000_read_phy_reg_gg82563_80003es2lan,
+	.release		= e1000_release_phy_80003es2lan,
+	.reset		  	= e1000e_phy_hw_reset_generic,
 	.set_d0_lplu_state  	= NULL,
 	.set_d3_lplu_state  	= e1000e_set_d3_lplu_state,
-	.write_phy_reg      	= e1000_write_phy_reg_gg82563_80003es2lan,
+	.write_reg      	= e1000_write_phy_reg_gg82563_80003es2lan,
 	.cfg_on_link_up      	= e1000_cfg_on_link_up_80003es2lan,
 };
 
 static struct e1000_nvm_operations es2_nvm_ops = {
-	.acquire_nvm		= e1000_acquire_nvm_80003es2lan,
-	.read_nvm		= e1000e_read_nvm_eerd,
-	.release_nvm		= e1000_release_nvm_80003es2lan,
-	.update_nvm		= e1000e_update_nvm_checksum_generic,
+	.acquire		= e1000_acquire_nvm_80003es2lan,
+	.read			= e1000e_read_nvm_eerd,
+	.release		= e1000_release_nvm_80003es2lan,
+	.update			= e1000e_update_nvm_checksum_generic,
 	.valid_led_default	= e1000e_valid_led_default,
-	.validate_nvm		= e1000e_validate_nvm_checksum_generic,
-	.write_nvm		= e1000_write_nvm_80003es2lan,
+	.validate		= e1000e_validate_nvm_checksum_generic,
+	.write			= e1000_write_nvm_80003es2lan,
 };
 
 struct e1000_info e1000_es2_info = {
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index e82638ecae8..0aa50c229c7 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2008 Intel Corporation.
+  Copyright(c) 1999 - 2009 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -35,14 +35,22 @@
 
 #include "e1000.h"
 
+enum {NETDEV_STATS, E1000_STATS};
+
 struct e1000_stats {
 	char stat_string[ETH_GSTRING_LEN];
+	int type;
 	int sizeof_stat;
 	int stat_offset;
 };
 
-#define E1000_STAT(m) sizeof(((struct e1000_adapter *)0)->m), \
-		      offsetof(struct e1000_adapter, m)
+#define E1000_STAT(m)		E1000_STATS, \
+				sizeof(((struct e1000_adapter *)0)->m), \
+		      		offsetof(struct e1000_adapter, m)
+#define E1000_NETDEV_STAT(m)	NETDEV_STATS, \
+				sizeof(((struct net_device *)0)->m), \
+				offsetof(struct net_device, m)
+
 static const struct e1000_stats e1000_gstrings_stats[] = {
 	{ "rx_packets", E1000_STAT(stats.gprc) },
 	{ "tx_packets", E1000_STAT(stats.gptc) },
@@ -52,21 +60,21 @@ static const struct e1000_stats e1000_gstrings_stats[] = {
 	{ "tx_broadcast", E1000_STAT(stats.bptc) },
 	{ "rx_multicast", E1000_STAT(stats.mprc) },
 	{ "tx_multicast", E1000_STAT(stats.mptc) },
-	{ "rx_errors", E1000_STAT(net_stats.rx_errors) },
-	{ "tx_errors", E1000_STAT(net_stats.tx_errors) },
-	{ "tx_dropped", E1000_STAT(net_stats.tx_dropped) },
+	{ "rx_errors", E1000_NETDEV_STAT(stats.rx_errors) },
+	{ "tx_errors", E1000_NETDEV_STAT(stats.tx_errors) },
+	{ "tx_dropped", E1000_NETDEV_STAT(stats.tx_dropped) },
 	{ "multicast", E1000_STAT(stats.mprc) },
 	{ "collisions", E1000_STAT(stats.colc) },
-	{ "rx_length_errors", E1000_STAT(net_stats.rx_length_errors) },
-	{ "rx_over_errors", E1000_STAT(net_stats.rx_over_errors) },
+	{ "rx_length_errors", E1000_NETDEV_STAT(stats.rx_length_errors) },
+	{ "rx_over_errors", E1000_NETDEV_STAT(stats.rx_over_errors) },
 	{ "rx_crc_errors", E1000_STAT(stats.crcerrs) },
-	{ "rx_frame_errors", E1000_STAT(net_stats.rx_frame_errors) },
+	{ "rx_frame_errors", E1000_NETDEV_STAT(stats.rx_frame_errors) },
 	{ "rx_no_buffer_count", E1000_STAT(stats.rnbc) },
 	{ "rx_missed_errors", E1000_STAT(stats.mpc) },
 	{ "tx_aborted_errors", E1000_STAT(stats.ecol) },
 	{ "tx_carrier_errors", E1000_STAT(stats.tncrs) },
-	{ "tx_fifo_errors", E1000_STAT(net_stats.tx_fifo_errors) },
-	{ "tx_heartbeat_errors", E1000_STAT(net_stats.tx_heartbeat_errors) },
+	{ "tx_fifo_errors", E1000_NETDEV_STAT(stats.tx_fifo_errors) },
+	{ "tx_heartbeat_errors", E1000_NETDEV_STAT(stats.tx_heartbeat_errors) },
 	{ "tx_window_errors", E1000_STAT(stats.latecol) },
 	{ "tx_abort_late_coll", E1000_STAT(stats.latecol) },
 	{ "tx_deferred_ok", E1000_STAT(stats.dc) },
@@ -182,6 +190,17 @@ static int e1000_get_settings(struct net_device *netdev,
 static u32 e1000_get_link(struct net_device *netdev)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_mac_info *mac = &adapter->hw.mac;
+
+	/*
+	 * If the link is not reported up to netdev, interrupts are disabled,
+	 * and so the physical link state may have changed since we last
+	 * looked. Set get_link_status to make sure that the true link
+	 * state is interrogated, rather than pulling a cached and possibly
+	 * stale link state from the driver.
+	 */
+	if (!netif_carrier_ok(netdev))
+		mac->get_link_status = 1;
 
 	return e1000_has_link(adapter);
 }
@@ -516,7 +535,8 @@ static int e1000_get_eeprom(struct net_device *netdev,
 
 	if (ret_val) {
 		/* a read error occurred, throw away the result */
-		memset(eeprom_buff, 0xff, sizeof(eeprom_buff));
+		memset(eeprom_buff, 0xff, sizeof(u16) *
+		       (last_word - first_word + 1));
 	} else {
 		/* Device's eeprom is always little-endian, word addressable */
 		for (i = 0; i < last_word - first_word + 1; i++)
@@ -596,7 +616,9 @@ static int e1000_set_eeprom(struct net_device *netdev,
 	 * and flush shadow RAM for applicable controllers
 	 */
 	if ((first_word <= NVM_CHECKSUM_REG) ||
-	    (hw->mac.type == e1000_82574) || (hw->mac.type == e1000_82573))
+	    (hw->mac.type == e1000_82583) ||
+	    (hw->mac.type == e1000_82574) ||
+	    (hw->mac.type == e1000_82573))
 		ret_val = e1000e_update_nvm_checksum(hw);
 
 out:
@@ -929,10 +951,10 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
 		e1000e_set_interrupt_capability(adapter);
 	}
 	/* Hook up test interrupt handler just for this test */
-	if (!request_irq(irq, &e1000_test_intr, IRQF_PROBE_SHARED, netdev->name,
+	if (!request_irq(irq, e1000_test_intr, IRQF_PROBE_SHARED, netdev->name,
 			 netdev)) {
 		shared_int = 0;
-	} else if (request_irq(irq, &e1000_test_intr, IRQF_SHARED,
+	} else if (request_irq(irq, e1000_test_intr, IRQF_SHARED,
 		 netdev->name, netdev)) {
 		*data = 1;
 		ret_val = -1;
@@ -1239,6 +1261,10 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
 
 	hw->mac.autoneg = 0;
 
+	/* Workaround: K1 must be disabled for stable 1Gbps operation */
+	if (hw->mac.type == e1000_pchlan)
+		e1000_configure_k1_ich8lan(hw, false);
+
 	if (hw->phy.type == e1000_phy_m88) {
 		/* Auto-MDI/MDIX Off */
 		e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, 0x0808);
@@ -1769,12 +1795,11 @@ static int e1000_set_wol(struct net_device *netdev,
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 
-	if (wol->wolopts & WAKE_MAGICSECURE)
-		return -EOPNOTSUPP;
-
 	if (!(adapter->flags & FLAG_HAS_WOL) ||
-	    !device_can_wakeup(&adapter->pdev->dev))
-		return wol->wolopts ? -EOPNOTSUPP : 0;
+	    !device_can_wakeup(&adapter->pdev->dev) ||
+	    (wol->wolopts & ~(WAKE_UCAST | WAKE_MCAST | WAKE_BCAST |
+	                      WAKE_MAGIC | WAKE_PHY | WAKE_ARP)))
+		return -EOPNOTSUPP;
 
 	/* these settings will always override what we currently have */
 	adapter->wol = 0;
@@ -1832,6 +1857,7 @@ static int e1000_phys_id(struct net_device *netdev, u32 data)
 
 	if ((hw->phy.type == e1000_phy_ife) ||
 	    (hw->mac.type == e1000_pchlan) ||
+	    (hw->mac.type == e1000_82583) ||
 	    (hw->mac.type == e1000_82574)) {
 		INIT_WORK(&adapter->led_blink_task, e1000e_led_blink_task);
 		if (!adapter->blink_timer.function) {
@@ -1912,10 +1938,21 @@ static void e1000_get_ethtool_stats(struct net_device *netdev,
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	int i;
+	char *p = NULL;
 
 	e1000e_update_stats(adapter);
 	for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
-		char *p = (char *)adapter+e1000_gstrings_stats[i].stat_offset;
+		switch (e1000_gstrings_stats[i].type) {
+		case NETDEV_STATS:
+			p = (char *) netdev +
+					e1000_gstrings_stats[i].stat_offset;
+			break;
+		case E1000_STATS:
+			p = (char *) adapter +
+					e1000_gstrings_stats[i].stat_offset;
+			break;
+		}
+
 		data[i] = (e1000_gstrings_stats[i].sizeof_stat ==
 			sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
 	}
@@ -1975,6 +2012,8 @@ static const struct ethtool_ops e1000_ethtool_ops = {
 	.get_sset_count		= e1000e_get_sset_count,
 	.get_coalesce		= e1000_get_coalesce,
 	.set_coalesce		= e1000_set_coalesce,
+	.get_flags		= ethtool_op_get_flags,
+	.set_flags		= ethtool_op_set_flags,
 };
 
 void e1000e_set_ethtool_ops(struct net_device *netdev)
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index aaea41ef794..a7d08dae79c 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2008 Intel Corporation.
+  Copyright(c) 1999 - 2009 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -219,7 +219,7 @@ enum e1e_registers {
 	E1000_HICR      = 0x08F00, /* Host Interface Control */
 };
 
-/* RSS registers */
+#define E1000_MAX_PHY_ADDR		4
 
 /* IGP01E1000 Specific Registers */
 #define IGP01E1000_PHY_PORT_CONFIG	0x10 /* Port Config */
@@ -356,6 +356,7 @@ enum e1e_registers {
 #define E1000_DEV_ID_80003ES2LAN_COPPER_SPT	0x10BA
 #define E1000_DEV_ID_80003ES2LAN_SERDES_SPT	0x10BB
 
+#define E1000_DEV_ID_ICH8_82567V_3		0x1501
 #define E1000_DEV_ID_ICH8_IGP_M_AMT		0x1049
 #define E1000_DEV_ID_ICH8_IGP_AMT		0x104A
 #define E1000_DEV_ID_ICH8_IGP_C			0x104B
@@ -741,6 +742,7 @@ struct e1000_mac_operations {
 	s32  (*check_for_link)(struct e1000_hw *);
 	s32  (*cleanup_led)(struct e1000_hw *);
 	void (*clear_hw_cntrs)(struct e1000_hw *);
+	void (*clear_vfta)(struct e1000_hw *);
 	s32  (*get_bus_info)(struct e1000_hw *);
 	s32  (*get_link_up_info)(struct e1000_hw *, u16 *, u16 *);
 	s32  (*led_on)(struct e1000_hw *);
@@ -751,38 +753,41 @@ struct e1000_mac_operations {
 	s32  (*setup_link)(struct e1000_hw *);
 	s32  (*setup_physical_interface)(struct e1000_hw *);
 	s32  (*setup_led)(struct e1000_hw *);
+	void (*write_vfta)(struct e1000_hw *, u32, u32);
 };
 
 /* Function pointers for the PHY. */
 struct e1000_phy_operations {
-	s32  (*acquire_phy)(struct e1000_hw *);
+	s32  (*acquire)(struct e1000_hw *);
+	s32  (*cfg_on_link_up)(struct e1000_hw *);
 	s32  (*check_polarity)(struct e1000_hw *);
 	s32  (*check_reset_block)(struct e1000_hw *);
-	s32  (*commit_phy)(struct e1000_hw *);
+	s32  (*commit)(struct e1000_hw *);
 	s32  (*force_speed_duplex)(struct e1000_hw *);
 	s32  (*get_cfg_done)(struct e1000_hw *hw);
 	s32  (*get_cable_length)(struct e1000_hw *);
-	s32  (*get_phy_info)(struct e1000_hw *);
-	s32  (*read_phy_reg)(struct e1000_hw *, u32, u16 *);
-	s32  (*read_phy_reg_locked)(struct e1000_hw *, u32, u16 *);
-	void (*release_phy)(struct e1000_hw *);
-	s32  (*reset_phy)(struct e1000_hw *);
+	s32  (*get_info)(struct e1000_hw *);
+	s32  (*read_reg)(struct e1000_hw *, u32, u16 *);
+	s32  (*read_reg_locked)(struct e1000_hw *, u32, u16 *);
+	void (*release)(struct e1000_hw *);
+	s32  (*reset)(struct e1000_hw *);
 	s32  (*set_d0_lplu_state)(struct e1000_hw *, bool);
 	s32  (*set_d3_lplu_state)(struct e1000_hw *, bool);
-	s32  (*write_phy_reg)(struct e1000_hw *, u32, u16);
-	s32  (*write_phy_reg_locked)(struct e1000_hw *, u32, u16);
-	s32  (*cfg_on_link_up)(struct e1000_hw *);
+	s32  (*write_reg)(struct e1000_hw *, u32, u16);
+	s32  (*write_reg_locked)(struct e1000_hw *, u32, u16);
+	void (*power_up)(struct e1000_hw *);
+	void (*power_down)(struct e1000_hw *);
 };
 
 /* Function pointers for the NVM. */
 struct e1000_nvm_operations {
-	s32  (*acquire_nvm)(struct e1000_hw *);
-	s32  (*read_nvm)(struct e1000_hw *, u16, u16, u16 *);
-	void (*release_nvm)(struct e1000_hw *);
-	s32  (*update_nvm)(struct e1000_hw *);
+	s32  (*acquire)(struct e1000_hw *);
+	s32  (*read)(struct e1000_hw *, u16, u16, u16 *);
+	void (*release)(struct e1000_hw *);
+	s32  (*update)(struct e1000_hw *);
 	s32  (*valid_led_default)(struct e1000_hw *, u16 *);
-	s32  (*validate_nvm)(struct e1000_hw *);
-	s32  (*write_nvm)(struct e1000_hw *, u16, u16, u16 *);
+	s32  (*validate)(struct e1000_hw *);
+	s32  (*write)(struct e1000_hw *, u16, u16, u16 *);
 };
 
 struct e1000_mac_info {
@@ -925,15 +930,4 @@ struct e1000_hw {
 	} dev_spec;
 };
 
-#ifdef DEBUG
-#define hw_dbg(hw, format, arg...) \
-	printk(KERN_DEBUG "%s: " format, e1000e_get_hw_dev_name(hw), ##arg)
-#else
-static inline int __attribute__ ((format (printf, 2, 3)))
-hw_dbg(struct e1000_hw *hw, const char *format, ...)
-{
-	return 0;
-}
-#endif
-
 #endif
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index eff3f478365..7b33be98a2c 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2008 Intel Corporation.
+  Copyright(c) 1999 - 2009 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -54,11 +54,6 @@
  * 82578DC Gigabit Network Connection
  */
 
-#include <linux/netdevice.h>
-#include <linux/ethtool.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-
 #include "e1000.h"
 
 #define ICH_FLASH_GFPREG		0x0000
@@ -200,7 +195,6 @@ union ich8_flash_protected_range {
 static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw);
 static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw);
 static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw);
-static s32 e1000_check_polarity_ife_ich8lan(struct e1000_hw *hw);
 static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank);
 static s32 e1000_retry_write_flash_byte_ich8lan(struct e1000_hw *hw,
 						u32 offset, u8 byte);
@@ -222,9 +216,9 @@ static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw);
 static s32 e1000_led_on_pchlan(struct e1000_hw *hw);
 static s32 e1000_led_off_pchlan(struct e1000_hw *hw);
 static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active);
+static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw);
 static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw);
 static s32  e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link);
-static s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable);
 
 static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg)
 {
@@ -265,26 +259,37 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
 	phy->addr                     = 1;
 	phy->reset_delay_us           = 100;
 
-	phy->ops.check_polarity       = e1000_check_polarity_ife_ich8lan;
-	phy->ops.read_phy_reg         = e1000_read_phy_reg_hv;
-	phy->ops.read_phy_reg_locked  = e1000_read_phy_reg_hv_locked;
+	phy->ops.read_reg             = e1000_read_phy_reg_hv;
+	phy->ops.read_reg_locked      = e1000_read_phy_reg_hv_locked;
 	phy->ops.set_d0_lplu_state    = e1000_set_lplu_state_pchlan;
 	phy->ops.set_d3_lplu_state    = e1000_set_lplu_state_pchlan;
-	phy->ops.write_phy_reg        = e1000_write_phy_reg_hv;
-	phy->ops.write_phy_reg_locked = e1000_write_phy_reg_hv_locked;
+	phy->ops.write_reg            = e1000_write_phy_reg_hv;
+	phy->ops.write_reg_locked     = e1000_write_phy_reg_hv_locked;
+	phy->ops.power_up             = e1000_power_up_phy_copper;
+	phy->ops.power_down           = e1000_power_down_phy_copper_ich8lan;
 	phy->autoneg_mask             = AUTONEG_ADVERTISE_SPEED_DEFAULT;
 
 	phy->id = e1000_phy_unknown;
 	e1000e_get_phy_id(hw);
 	phy->type = e1000e_get_phy_type_from_id(phy->id);
 
-	if (phy->type == e1000_phy_82577) {
+	switch (phy->type) {
+	case e1000_phy_82577:
 		phy->ops.check_polarity = e1000_check_polarity_82577;
 		phy->ops.force_speed_duplex =
 			e1000_phy_force_speed_duplex_82577;
-		phy->ops.get_cable_length   = e1000_get_cable_length_82577;
-		phy->ops.get_phy_info = e1000_get_phy_info_82577;
-		phy->ops.commit_phy = e1000e_phy_sw_reset;
+		phy->ops.get_cable_length = e1000_get_cable_length_82577;
+		phy->ops.get_info = e1000_get_phy_info_82577;
+		phy->ops.commit = e1000e_phy_sw_reset;
+	case e1000_phy_82578:
+		phy->ops.check_polarity = e1000_check_polarity_m88;
+		phy->ops.force_speed_duplex = e1000e_phy_force_speed_duplex_m88;
+		phy->ops.get_cable_length = e1000e_get_cable_length_m88;
+		phy->ops.get_info = e1000e_get_phy_info_m88;
+		break;
+	default:
+		ret_val = -E1000_ERR_PHY;
+		break;
 	}
 
 	return ret_val;
@@ -305,17 +310,22 @@ static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw)
 	phy->addr			= 1;
 	phy->reset_delay_us		= 100;
 
+	phy->ops.power_up               = e1000_power_up_phy_copper;
+	phy->ops.power_down             = e1000_power_down_phy_copper_ich8lan;
+
 	/*
 	 * We may need to do this twice - once for IGP and if that fails,
 	 * we'll set BM func pointers and try again
 	 */
 	ret_val = e1000e_determine_phy_address(hw);
 	if (ret_val) {
-		hw->phy.ops.write_phy_reg = e1000e_write_phy_reg_bm;
-		hw->phy.ops.read_phy_reg  = e1000e_read_phy_reg_bm;
+		phy->ops.write_reg = e1000e_write_phy_reg_bm;
+		phy->ops.read_reg  = e1000e_read_phy_reg_bm;
 		ret_val = e1000e_determine_phy_address(hw);
-		if (ret_val)
+		if (ret_val) {
+			e_dbg("Cannot determine PHY addr. Erroring out\n");
 			return ret_val;
+		}
 	}
 
 	phy->id = 0;
@@ -332,29 +342,36 @@ static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw)
 	case IGP03E1000_E_PHY_ID:
 		phy->type = e1000_phy_igp_3;
 		phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
-		phy->ops.read_phy_reg_locked = e1000e_read_phy_reg_igp_locked;
-		phy->ops.write_phy_reg_locked = e1000e_write_phy_reg_igp_locked;
+		phy->ops.read_reg_locked = e1000e_read_phy_reg_igp_locked;
+		phy->ops.write_reg_locked = e1000e_write_phy_reg_igp_locked;
+		phy->ops.get_info = e1000e_get_phy_info_igp;
+		phy->ops.check_polarity = e1000_check_polarity_igp;
+		phy->ops.force_speed_duplex = e1000e_phy_force_speed_duplex_igp;
 		break;
 	case IFE_E_PHY_ID:
 	case IFE_PLUS_E_PHY_ID:
 	case IFE_C_E_PHY_ID:
 		phy->type = e1000_phy_ife;
 		phy->autoneg_mask = E1000_ALL_NOT_GIG;
+		phy->ops.get_info = e1000_get_phy_info_ife;
+		phy->ops.check_polarity = e1000_check_polarity_ife;
+		phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_ife;
 		break;
 	case BME1000_E_PHY_ID:
 		phy->type = e1000_phy_bm;
 		phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
-		hw->phy.ops.read_phy_reg = e1000e_read_phy_reg_bm;
-		hw->phy.ops.write_phy_reg = e1000e_write_phy_reg_bm;
-		hw->phy.ops.commit_phy = e1000e_phy_sw_reset;
+		phy->ops.read_reg = e1000e_read_phy_reg_bm;
+		phy->ops.write_reg = e1000e_write_phy_reg_bm;
+		phy->ops.commit = e1000e_phy_sw_reset;
+		phy->ops.get_info = e1000e_get_phy_info_m88;
+		phy->ops.check_polarity = e1000_check_polarity_m88;
+		phy->ops.force_speed_duplex = e1000e_phy_force_speed_duplex_m88;
 		break;
 	default:
 		return -E1000_ERR_PHY;
 		break;
 	}
 
-	phy->ops.check_polarity = e1000_check_polarity_ife_ich8lan;
-
 	return 0;
 }
 
@@ -374,7 +391,7 @@ static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw)
 
 	/* Can't read flash registers if the register set isn't mapped. */
 	if (!hw->flash_address) {
-		hw_dbg(hw, "ERROR: Flash registers not mapped\n");
+		e_dbg("ERROR: Flash registers not mapped\n");
 		return -E1000_ERR_CONFIG;
 	}
 
@@ -407,7 +424,7 @@ static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw)
 
 	/* Clear shadow ram */
 	for (i = 0; i < nvm->word_size; i++) {
-		dev_spec->shadow_ram[i].modified = 0;
+		dev_spec->shadow_ram[i].modified = false;
 		dev_spec->shadow_ram[i].value    = 0xFFFF;
 	}
 
@@ -436,7 +453,7 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter)
 	if (mac->type == e1000_ich8lan)
 		mac->rar_entry_count--;
 	/* Set if manageability features are enabled. */
-	mac->arc_subsystem_valid = 1;
+	mac->arc_subsystem_valid = true;
 
 	/* LED operations */
 	switch (mac->type) {
@@ -470,7 +487,7 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter)
 
 	/* Enable PCS Lock-loss workaround for ICH8 */
 	if (mac->type == e1000_ich8lan)
-		e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, 1);
+		e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, true);
 
 	return 0;
 }
@@ -556,7 +573,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
 	 */
 	ret_val = e1000e_config_fc_after_link_up(hw);
 	if (ret_val)
-		hw_dbg(hw, "Error configuring flow control\n");
+		e_dbg("Error configuring flow control\n");
 
 out:
 	return ret_val;
@@ -636,8 +653,6 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw)
 	u32 extcnf_ctrl, timeout = PHY_CFG_TIMEOUT;
 	s32 ret_val = 0;
 
-	might_sleep();
-
 	mutex_lock(&swflag_mutex);
 
 	while (timeout) {
@@ -650,7 +665,7 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw)
 	}
 
 	if (!timeout) {
-		hw_dbg(hw, "SW/FW/HW has locked the resource for too long.\n");
+		e_dbg("SW/FW/HW has locked the resource for too long.\n");
 		ret_val = -E1000_ERR_CONFIG;
 		goto out;
 	}
@@ -670,7 +685,7 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw)
 	}
 
 	if (!timeout) {
-		hw_dbg(hw, "Failed to acquire the semaphore.\n");
+		e_dbg("Failed to acquire the semaphore.\n");
 		extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
 		ew32(EXTCNF_CTRL, extcnf_ctrl);
 		ret_val = -E1000_ERR_CONFIG;
@@ -714,7 +729,9 @@ static void e1000_release_swflag_ich8lan(struct e1000_hw *hw)
  **/
 static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw)
 {
-	u32 fwsm = er32(FWSM);
+	u32 fwsm;
+
+	fwsm = er32(FWSM);
 
 	return (fwsm & E1000_FWSM_MODE_MASK) ==
 		(E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT);
@@ -738,77 +755,6 @@ static s32 e1000_check_reset_block_ich8lan(struct e1000_hw *hw)
 }
 
 /**
- *  e1000_phy_force_speed_duplex_ich8lan - Force PHY speed & duplex
- *  @hw: pointer to the HW structure
- *
- *  Forces the speed and duplex settings of the PHY.
- *  This is a function pointer entry point only called by
- *  PHY setup routines.
- **/
-static s32 e1000_phy_force_speed_duplex_ich8lan(struct e1000_hw *hw)
-{
-	struct e1000_phy_info *phy = &hw->phy;
-	s32 ret_val;
-	u16 data;
-	bool link;
-
-	if (phy->type != e1000_phy_ife) {
-		ret_val = e1000e_phy_force_speed_duplex_igp(hw);
-		return ret_val;
-	}
-
-	ret_val = e1e_rphy(hw, PHY_CONTROL, &data);
-	if (ret_val)
-		return ret_val;
-
-	e1000e_phy_force_speed_duplex_setup(hw, &data);
-
-	ret_val = e1e_wphy(hw, PHY_CONTROL, data);
-	if (ret_val)
-		return ret_val;
-
-	/* Disable MDI-X support for 10/100 */
-	ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &data);
-	if (ret_val)
-		return ret_val;
-
-	data &= ~IFE_PMC_AUTO_MDIX;
-	data &= ~IFE_PMC_FORCE_MDIX;
-
-	ret_val = e1e_wphy(hw, IFE_PHY_MDIX_CONTROL, data);
-	if (ret_val)
-		return ret_val;
-
-	hw_dbg(hw, "IFE PMC: %X\n", data);
-
-	udelay(1);
-
-	if (phy->autoneg_wait_to_complete) {
-		hw_dbg(hw, "Waiting for forced speed/duplex link on IFE phy.\n");
-
-		ret_val = e1000e_phy_has_link_generic(hw,
-						     PHY_FORCE_LIMIT,
-						     100000,
-						     &link);
-		if (ret_val)
-			return ret_val;
-
-		if (!link)
-			hw_dbg(hw, "Link taking longer than expected.\n");
-
-		/* Try once more */
-		ret_val = e1000e_phy_has_link_generic(hw,
-						     PHY_FORCE_LIMIT,
-						     100000,
-						     &link);
-		if (ret_val)
-			return ret_val;
-	}
-
-	return 0;
-}
-
-/**
  *  e1000_sw_lcd_config_ich8lan - SW-based LCD Configuration
  *  @hw:   pointer to the HW structure
  *
@@ -822,7 +768,7 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
 	s32 ret_val;
 	u16 word_addr, reg_data, reg_addr, phy_page = 0;
 
-	ret_val = hw->phy.ops.acquire_phy(hw);
+	ret_val = hw->phy.ops.acquire(hw);
 	if (ret_val)
 		return ret_val;
 
@@ -918,7 +864,7 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
 			reg_addr &= PHY_REG_MASK;
 			reg_addr |= phy_page;
 
-			ret_val = phy->ops.write_phy_reg_locked(hw,
+			ret_val = phy->ops.write_reg_locked(hw,
 			                                    (u32)reg_addr,
 			                                    reg_data);
 			if (ret_val)
@@ -927,7 +873,7 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
 	}
 
 out:
-	hw->phy.ops.release_phy(hw);
+	hw->phy.ops.release(hw);
 	return ret_val;
 }
 
@@ -951,15 +897,14 @@ static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link)
 		goto out;
 
 	/* Wrap the whole flow with the sw flag */
-	ret_val = hw->phy.ops.acquire_phy(hw);
+	ret_val = hw->phy.ops.acquire(hw);
 	if (ret_val)
 		goto out;
 
 	/* Disable K1 when link is 1Gbps, otherwise use the NVM setting */
 	if (link) {
 		if (hw->phy.type == e1000_phy_82578) {
-			ret_val = hw->phy.ops.read_phy_reg_locked(hw,
-			                                          BM_CS_STATUS,
+			ret_val = hw->phy.ops.read_reg_locked(hw, BM_CS_STATUS,
 			                                          &status_reg);
 			if (ret_val)
 				goto release;
@@ -975,8 +920,7 @@ static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link)
 		}
 
 		if (hw->phy.type == e1000_phy_82577) {
-			ret_val = hw->phy.ops.read_phy_reg_locked(hw,
-			                                          HV_M_STATUS,
+			ret_val = hw->phy.ops.read_reg_locked(hw, HV_M_STATUS,
 			                                          &status_reg);
 			if (ret_val)
 				goto release;
@@ -992,14 +936,14 @@ static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link)
 		}
 
 		/* Link stall fix for link up */
-		ret_val = hw->phy.ops.write_phy_reg_locked(hw, PHY_REG(770, 19),
+		ret_val = hw->phy.ops.write_reg_locked(hw, PHY_REG(770, 19),
 		                                           0x0100);
 		if (ret_val)
 			goto release;
 
 	} else {
 		/* Link stall fix for link down */
-		ret_val = hw->phy.ops.write_phy_reg_locked(hw, PHY_REG(770, 19),
+		ret_val = hw->phy.ops.write_reg_locked(hw, PHY_REG(770, 19),
 		                                           0x4100);
 		if (ret_val)
 			goto release;
@@ -1008,7 +952,7 @@ static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link)
 	ret_val = e1000_configure_k1_ich8lan(hw, k1_enable);
 
 release:
-	hw->phy.ops.release_phy(hw);
+	hw->phy.ops.release(hw);
 out:
 	return ret_val;
 }
@@ -1023,7 +967,7 @@ out:
  *
  *  Success returns 0, Failure returns -E1000_ERR_PHY (-2)
  **/
-static s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable)
+s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable)
 {
 	s32 ret_val = 0;
 	u32 ctrl_reg = 0;
@@ -1084,7 +1028,7 @@ static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state)
 	if (hw->mac.type != e1000_pchlan)
 		return ret_val;
 
-	ret_val = hw->phy.ops.acquire_phy(hw);
+	ret_val = hw->phy.ops.acquire(hw);
 	if (ret_val)
 		return ret_val;
 
@@ -1098,7 +1042,7 @@ static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state)
 
 	mac_reg = er32(PHY_CTRL);
 
-	ret_val = hw->phy.ops.read_phy_reg_locked(hw, HV_OEM_BITS, &oem_reg);
+	ret_val = hw->phy.ops.read_reg_locked(hw, HV_OEM_BITS, &oem_reg);
 	if (ret_val)
 		goto out;
 
@@ -1120,10 +1064,10 @@ static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state)
 	/* Restart auto-neg to activate the bits */
 	if (!e1000_check_reset_block(hw))
 		oem_reg |= HV_OEM_BITS_RESTART_AN;
-	ret_val = hw->phy.ops.write_phy_reg_locked(hw, HV_OEM_BITS, oem_reg);
+	ret_val = hw->phy.ops.write_reg_locked(hw, HV_OEM_BITS, oem_reg);
 
 out:
-	hw->phy.ops.release_phy(hw);
+	hw->phy.ops.release(hw);
 
 	return ret_val;
 }
@@ -1166,7 +1110,7 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw)
 	}
 
 	/* Select page 0 */
-	ret_val = hw->phy.ops.acquire_phy(hw);
+	ret_val = hw->phy.ops.acquire(hw);
 	if (ret_val)
 		return ret_val;
 
@@ -1174,7 +1118,7 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw)
 	ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0);
 	if (ret_val)
 		goto out;
-	hw->phy.ops.release_phy(hw);
+	hw->phy.ops.release(hw);
 
 	/*
 	 * Configure the K1 Si workaround during phy reset assuming there is
@@ -1210,7 +1154,7 @@ static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw)
 	 * leave the PHY in a bad state possibly resulting in no link.
 	 */
 	if (loop == 0)
-		hw_dbg(hw, "LAN_INIT_DONE not set, increase timeout\n");
+		e_dbg("LAN_INIT_DONE not set, increase timeout\n");
 
 	/* Clear the Init Done bit for the next init event */
 	data = er32(STATUS);
@@ -1262,122 +1206,6 @@ out:
 }
 
 /**
- *  e1000_get_phy_info_ife_ich8lan - Retrieves various IFE PHY states
- *  @hw: pointer to the HW structure
- *
- *  Populates "phy" structure with various feature states.
- *  This function is only called by other family-specific
- *  routines.
- **/
-static s32 e1000_get_phy_info_ife_ich8lan(struct e1000_hw *hw)
-{
-	struct e1000_phy_info *phy = &hw->phy;
-	s32 ret_val;
-	u16 data;
-	bool link;
-
-	ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
-	if (ret_val)
-		return ret_val;
-
-	if (!link) {
-		hw_dbg(hw, "Phy info is only valid if link is up\n");
-		return -E1000_ERR_CONFIG;
-	}
-
-	ret_val = e1e_rphy(hw, IFE_PHY_SPECIAL_CONTROL, &data);
-	if (ret_val)
-		return ret_val;
-	phy->polarity_correction = (!(data & IFE_PSC_AUTO_POLARITY_DISABLE));
-
-	if (phy->polarity_correction) {
-		ret_val = phy->ops.check_polarity(hw);
-		if (ret_val)
-			return ret_val;
-	} else {
-		/* Polarity is forced */
-		phy->cable_polarity = (data & IFE_PSC_FORCE_POLARITY)
-				      ? e1000_rev_polarity_reversed
-				      : e1000_rev_polarity_normal;
-	}
-
-	ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &data);
-	if (ret_val)
-		return ret_val;
-
-	phy->is_mdix = (data & IFE_PMC_MDIX_STATUS);
-
-	/* The following parameters are undefined for 10/100 operation. */
-	phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
-	phy->local_rx = e1000_1000t_rx_status_undefined;
-	phy->remote_rx = e1000_1000t_rx_status_undefined;
-
-	return 0;
-}
-
-/**
- *  e1000_get_phy_info_ich8lan - Calls appropriate PHY type get_phy_info
- *  @hw: pointer to the HW structure
- *
- *  Wrapper for calling the get_phy_info routines for the appropriate phy type.
- *  This is a function pointer entry point called by drivers
- *  or other shared routines.
- **/
-static s32 e1000_get_phy_info_ich8lan(struct e1000_hw *hw)
-{
-	switch (hw->phy.type) {
-	case e1000_phy_ife:
-		return e1000_get_phy_info_ife_ich8lan(hw);
-		break;
-	case e1000_phy_igp_3:
-	case e1000_phy_bm:
-	case e1000_phy_82578:
-	case e1000_phy_82577:
-		return e1000e_get_phy_info_igp(hw);
-		break;
-	default:
-		break;
-	}
-
-	return -E1000_ERR_PHY_TYPE;
-}
-
-/**
- *  e1000_check_polarity_ife_ich8lan - Check cable polarity for IFE PHY
- *  @hw: pointer to the HW structure
- *
- *  Polarity is determined on the polarity reversal feature being enabled.
- *  This function is only called by other family-specific
- *  routines.
- **/
-static s32 e1000_check_polarity_ife_ich8lan(struct e1000_hw *hw)
-{
-	struct e1000_phy_info *phy = &hw->phy;
-	s32 ret_val;
-	u16 phy_data, offset, mask;
-
-	/*
-	 * Polarity is determined based on the reversal feature being enabled.
-	 */
-	if (phy->polarity_correction) {
-		offset	= IFE_PHY_EXTENDED_STATUS_CONTROL;
-		mask	= IFE_PESC_POLARITY_REVERSED;
-	} else {
-		offset	= IFE_PHY_SPECIAL_CONTROL;
-		mask	= IFE_PSC_FORCE_POLARITY;
-	}
-
-	ret_val = e1e_rphy(hw, offset, &phy_data);
-
-	if (!ret_val)
-		phy->cable_polarity = (phy_data & mask)
-				      ? e1000_rev_polarity_reversed
-				      : e1000_rev_polarity_normal;
-
-	return ret_val;
-}
-
-/**
  *  e1000_set_lplu_state_pchlan - Set Low Power Link Up state
  *  @hw: pointer to the HW structure
  *  @active: true to enable LPLU, false to disable
@@ -1412,7 +1240,7 @@ out:
 /**
  *  e1000_set_d0_lplu_state_ich8lan - Set Low Power Linkup D0 state
  *  @hw: pointer to the HW structure
- *  @active: TRUE to enable LPLU, FALSE to disable
+ *  @active: true to enable LPLU, false to disable
  *
  *  Sets the LPLU D0 state according to the active flag.  When
  *  activating LPLU this function also disables smart speed
@@ -1498,7 +1326,7 @@ static s32 e1000_set_d0_lplu_state_ich8lan(struct e1000_hw *hw, bool active)
 /**
  *  e1000_set_d3_lplu_state_ich8lan - Set Low Power Linkup D3 state
  *  @hw: pointer to the HW structure
- *  @active: TRUE to enable LPLU, FALSE to disable
+ *  @active: true to enable LPLU, false to disable
  *
  *  Sets the LPLU D3 state according to the active flag.  When
  *  activating LPLU this function also disables smart speed
@@ -1611,7 +1439,7 @@ static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank)
 
 			return 0;
 		}
-		hw_dbg(hw, "Unable to determine valid NVM bank via EEC - "
+		e_dbg("Unable to determine valid NVM bank via EEC - "
 		       "reading flash signature\n");
 		/* fall-thru */
 	default:
@@ -1641,7 +1469,7 @@ static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank)
 			return 0;
 		}
 
-		hw_dbg(hw, "ERROR: No valid NVM bank present\n");
+		e_dbg("ERROR: No valid NVM bank present\n");
 		return -E1000_ERR_NVM;
 	}
 
@@ -1669,16 +1497,16 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
 
 	if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) ||
 	    (words == 0)) {
-		hw_dbg(hw, "nvm parameter(s) out of bounds\n");
+		e_dbg("nvm parameter(s) out of bounds\n");
 		ret_val = -E1000_ERR_NVM;
 		goto out;
 	}
 
-	nvm->ops.acquire_nvm(hw);
+	nvm->ops.acquire(hw);
 
 	ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
 	if (ret_val) {
-		hw_dbg(hw, "Could not detect valid bank, assuming bank 0\n");
+		e_dbg("Could not detect valid bank, assuming bank 0\n");
 		bank = 0;
 	}
 
@@ -1700,11 +1528,11 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
 		}
 	}
 
-	nvm->ops.release_nvm(hw);
+	nvm->ops.release(hw);
 
 out:
 	if (ret_val)
-		hw_dbg(hw, "NVM read error: %d\n", ret_val);
+		e_dbg("NVM read error: %d\n", ret_val);
 
 	return ret_val;
 }
@@ -1726,7 +1554,7 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw)
 
 	/* Check if the flash descriptor is valid */
 	if (hsfsts.hsf_status.fldesvalid == 0) {
-		hw_dbg(hw, "Flash descriptor invalid.  "
+		e_dbg("Flash descriptor invalid.  "
 			 "SW Sequencing must be used.");
 		return -E1000_ERR_NVM;
 	}
@@ -1749,7 +1577,7 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw)
 	if (hsfsts.hsf_status.flcinprog == 0) {
 		/*
 		 * There is no cycle running at present,
-		 * so we can start a cycle
+		 * so we can start a cycle.
 		 * Begin by setting Flash Cycle Done.
 		 */
 		hsfsts.hsf_status.flcdone = 1;
@@ -1757,7 +1585,7 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw)
 		ret_val = 0;
 	} else {
 		/*
-		 * otherwise poll for sometime so the current
+		 * Otherwise poll for sometime so the current
 		 * cycle has a chance to end before giving up.
 		 */
 		for (i = 0; i < ICH_FLASH_READ_COMMAND_TIMEOUT; i++) {
@@ -1776,7 +1604,7 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw)
 			hsfsts.hsf_status.flcdone = 1;
 			ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval);
 		} else {
-			hw_dbg(hw, "Flash controller busy, cannot get access");
+			e_dbg("Flash controller busy, cannot get access");
 		}
 	}
 
@@ -1926,7 +1754,7 @@ static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
 				/* Repeat for some time before giving up. */
 				continue;
 			} else if (hsfsts.hsf_status.flcdone == 0) {
-				hw_dbg(hw, "Timeout error - flash cycle "
+				e_dbg("Timeout error - flash cycle "
 					 "did not complete.");
 				break;
 			}
@@ -1954,18 +1782,18 @@ static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
 
 	if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) ||
 	    (words == 0)) {
-		hw_dbg(hw, "nvm parameter(s) out of bounds\n");
+		e_dbg("nvm parameter(s) out of bounds\n");
 		return -E1000_ERR_NVM;
 	}
 
-	nvm->ops.acquire_nvm(hw);
+	nvm->ops.acquire(hw);
 
 	for (i = 0; i < words; i++) {
-		dev_spec->shadow_ram[offset+i].modified = 1;
+		dev_spec->shadow_ram[offset+i].modified = true;
 		dev_spec->shadow_ram[offset+i].value = data[i];
 	}
 
-	nvm->ops.release_nvm(hw);
+	nvm->ops.release(hw);
 
 	return 0;
 }
@@ -1996,7 +1824,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
 	if (nvm->type != e1000_nvm_flash_sw)
 		goto out;
 
-	nvm->ops.acquire_nvm(hw);
+	nvm->ops.acquire(hw);
 
 	/*
 	 * We're writing to the opposite bank so if we're on bank 1,
@@ -2005,7 +1833,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
 	 */
 	ret_val =  e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
 	if (ret_val) {
-		hw_dbg(hw, "Could not detect valid bank, assuming bank 0\n");
+		e_dbg("Could not detect valid bank, assuming bank 0\n");
 		bank = 0;
 	}
 
@@ -2014,7 +1842,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
 		old_bank_offset = 0;
 		ret_val = e1000_erase_flash_bank_ich8lan(hw, 1);
 		if (ret_val) {
-			nvm->ops.release_nvm(hw);
+			nvm->ops.release(hw);
 			goto out;
 		}
 	} else {
@@ -2022,7 +1850,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
 		new_bank_offset = 0;
 		ret_val = e1000_erase_flash_bank_ich8lan(hw, 0);
 		if (ret_val) {
-			nvm->ops.release_nvm(hw);
+			nvm->ops.release(hw);
 			goto out;
 		}
 	}
@@ -2079,8 +1907,8 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
 	 */
 	if (ret_val) {
 		/* Possibly read-only, see e1000e_write_protect_nvm_ich8lan() */
-		hw_dbg(hw, "Flash commit failed.\n");
-		nvm->ops.release_nvm(hw);
+		e_dbg("Flash commit failed.\n");
+		nvm->ops.release(hw);
 		goto out;
 	}
 
@@ -2093,7 +1921,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
 	act_offset = new_bank_offset + E1000_ICH_NVM_SIG_WORD;
 	ret_val = e1000_read_flash_word_ich8lan(hw, act_offset, &data);
 	if (ret_val) {
-		nvm->ops.release_nvm(hw);
+		nvm->ops.release(hw);
 		goto out;
 	}
 	data &= 0xBFFF;
@@ -2101,7 +1929,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
 						       act_offset * 2 + 1,
 						       (u8)(data >> 8));
 	if (ret_val) {
-		nvm->ops.release_nvm(hw);
+		nvm->ops.release(hw);
 		goto out;
 	}
 
@@ -2114,17 +1942,17 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
 	act_offset = (old_bank_offset + E1000_ICH_NVM_SIG_WORD) * 2 + 1;
 	ret_val = e1000_retry_write_flash_byte_ich8lan(hw, act_offset, 0);
 	if (ret_val) {
-		nvm->ops.release_nvm(hw);
+		nvm->ops.release(hw);
 		goto out;
 	}
 
 	/* Great!  Everything worked, we can now clear the cached entries. */
 	for (i = 0; i < E1000_ICH8_SHADOW_RAM_WORDS; i++) {
-		dev_spec->shadow_ram[i].modified = 0;
+		dev_spec->shadow_ram[i].modified = false;
 		dev_spec->shadow_ram[i].value = 0xFFFF;
 	}
 
-	nvm->ops.release_nvm(hw);
+	nvm->ops.release(hw);
 
 	/*
 	 * Reload the EEPROM, or else modifications will not appear
@@ -2135,7 +1963,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
 
 out:
 	if (ret_val)
-		hw_dbg(hw, "NVM update error: %d\n", ret_val);
+		e_dbg("NVM update error: %d\n", ret_val);
 
 	return ret_val;
 }
@@ -2193,7 +2021,7 @@ void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw)
 	union ich8_hws_flash_status hsfsts;
 	u32 gfpreg;
 
-	nvm->ops.acquire_nvm(hw);
+	nvm->ops.acquire(hw);
 
 	gfpreg = er32flash(ICH_FLASH_GFPREG);
 
@@ -2214,7 +2042,7 @@ void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw)
 	hsfsts.hsf_status.flockdn = true;
 	ew32flash(ICH_FLASH_HSFSTS, hsfsts.regval);
 
-	nvm->ops.release_nvm(hw);
+	nvm->ops.release(hw);
 }
 
 /**
@@ -2285,7 +2113,7 @@ static s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
 			/* Repeat for some time before giving up. */
 			continue;
 		if (hsfsts.hsf_status.flcdone == 0) {
-			hw_dbg(hw, "Timeout error - flash cycle "
+			e_dbg("Timeout error - flash cycle "
 				 "did not complete.");
 			break;
 		}
@@ -2330,7 +2158,7 @@ static s32 e1000_retry_write_flash_byte_ich8lan(struct e1000_hw *hw,
 		return ret_val;
 
 	for (program_retries = 0; program_retries < 100; program_retries++) {
-		hw_dbg(hw, "Retrying Byte %2.2X at offset %u\n", byte, offset);
+		e_dbg("Retrying Byte %2.2X at offset %u\n", byte, offset);
 		udelay(100);
 		ret_val = e1000_write_flash_byte_ich8lan(hw, offset, byte);
 		if (!ret_val)
@@ -2360,9 +2188,7 @@ static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank)
 	u32 flash_bank_size = nvm->flash_bank_size * 2;
 	s32 ret_val;
 	s32 count = 0;
-	s32 iteration;
-	s32 sector_size;
-	s32 j;
+	s32 j, iteration, sector_size;
 
 	hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
 
@@ -2465,7 +2291,7 @@ static s32 e1000_valid_led_default_ich8lan(struct e1000_hw *hw, u16 *data)
 
 	ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data);
 	if (ret_val) {
-		hw_dbg(hw, "NVM Read Error\n");
+		e_dbg("NVM Read Error\n");
 		return ret_val;
 	}
 
@@ -2595,10 +2421,10 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
 	 */
 	ret_val = e1000e_disable_pcie_master(hw);
 	if (ret_val) {
-		hw_dbg(hw, "PCI-E Master disable polling has failed.\n");
+		e_dbg("PCI-E Master disable polling has failed.\n");
 	}
 
-	hw_dbg(hw, "Masking off all interrupts\n");
+	e_dbg("Masking off all interrupts\n");
 	ew32(IMC, 0xffffffff);
 
 	/*
@@ -2649,8 +2475,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
 		ctrl |= E1000_CTRL_PHY_RST;
 	}
 	ret_val = e1000_acquire_swflag_ich8lan(hw);
-	/* Whether or not the swflag was acquired, we need to reset the part */
-	hw_dbg(hw, "Issuing a global reset to ich8lan\n");
+	e_dbg("Issuing a global reset to ich8lan\n");
 	ew32(CTRL, (ctrl | E1000_CTRL_RST));
 	msleep(20);
 
@@ -2670,7 +2495,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
 			 * return with an error. This can happen in situations
 			 * where there is no eeprom and prevents getting link.
 			 */
-			hw_dbg(hw, "Auto Read Done did not complete\n");
+			e_dbg("Auto Read Done did not complete\n");
 		}
 	}
 	/* Dummy read to clear the phy wakeup bit after lcd reset */
@@ -2731,16 +2556,15 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw)
 
 	/* Initialize identification LED */
 	ret_val = mac->ops.id_led_init(hw);
-	if (ret_val) {
-		hw_dbg(hw, "Error initializing identification LED\n");
-		return ret_val;
-	}
+	if (ret_val)
+		e_dbg("Error initializing identification LED\n");
+		/* This is not fatal and we should not stop init due to this */
 
 	/* Setup the receive address. */
 	e1000e_init_rx_addrs(hw, mac->rar_entry_count);
 
 	/* Zero out the Multicast HASH table */
-	hw_dbg(hw, "Zeroing the MTA\n");
+	e_dbg("Zeroing the MTA\n");
 	for (i = 0; i < mac->mta_reg_count; i++)
 		E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
 
@@ -2750,7 +2574,7 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw)
 	 * Reset the phy after disabling host wakeup to reset the Rx buffer.
 	 */
 	if (hw->phy.type == e1000_phy_82578) {
-		hw->phy.ops.read_phy_reg(hw, BM_WUC, &i);
+		hw->phy.ops.read_reg(hw, BM_WUC, &i);
 		ret_val = e1000_phy_hw_reset_ich8lan(hw);
 		if (ret_val)
 			return ret_val;
@@ -2886,7 +2710,7 @@ static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw)
 	 */
 	hw->fc.current_mode = hw->fc.requested_mode;
 
-	hw_dbg(hw, "After fix-ups FlowControl is now = %x\n",
+	e_dbg("After fix-ups FlowControl is now = %x\n",
 		hw->fc.current_mode);
 
 	/* Continue to configure the copper link. */
@@ -2897,7 +2721,7 @@ static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw)
 	ew32(FCTTV, hw->fc.pause_time);
 	if ((hw->phy.type == e1000_phy_82578) ||
 	    (hw->phy.type == e1000_phy_82577)) {
-		ret_val = hw->phy.ops.write_phy_reg(hw,
+		ret_val = hw->phy.ops.write_reg(hw,
 		                             PHY_REG(BM_PORT_CTRL_PAGE, 27),
 		                             hw->fc.pause_time);
 		if (ret_val)
@@ -2960,7 +2784,7 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw)
 			return ret_val;
 		break;
 	case e1000_phy_ife:
-		ret_val = hw->phy.ops.read_phy_reg(hw, IFE_PHY_MDIX_CONTROL,
+		ret_val = hw->phy.ops.read_reg(hw, IFE_PHY_MDIX_CONTROL,
 		                               &reg_data);
 		if (ret_val)
 			return ret_val;
@@ -2979,7 +2803,7 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw)
 			reg_data |= IFE_PMC_AUTO_MDIX;
 			break;
 		}
-		ret_val = hw->phy.ops.write_phy_reg(hw, IFE_PHY_MDIX_CONTROL,
+		ret_val = hw->phy.ops.write_reg(hw, IFE_PHY_MDIX_CONTROL,
 		                                reg_data);
 		if (ret_val)
 			return ret_val;
@@ -3092,8 +2916,8 @@ static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw)
  *  @hw: pointer to the HW structure
  *  @state: boolean value used to set the current Kumeran workaround state
  *
- *  If ICH8, set the current Kumeran workaround state (enabled - TRUE
- *  /disabled - FALSE).
+ *  If ICH8, set the current Kumeran workaround state (enabled - true
+ *  /disabled - false).
  **/
 void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
 						 bool state)
@@ -3101,7 +2925,7 @@ void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
 	struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
 
 	if (hw->mac.type != e1000_ich8lan) {
-		hw_dbg(hw, "Workaround applies to ICH8 only.\n");
+		e_dbg("Workaround applies to ICH8 only.\n");
 		return;
 	}
 
@@ -3209,6 +3033,7 @@ void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw)
 	u32 phy_ctrl;
 
 	switch (hw->mac.type) {
+	case e1000_ich8lan:
 	case e1000_ich9lan:
 	case e1000_ich10lan:
 	case e1000_pchlan:
@@ -3281,7 +3106,7 @@ static s32 e1000_led_off_ich8lan(struct e1000_hw *hw)
  **/
 static s32 e1000_setup_led_pchlan(struct e1000_hw *hw)
 {
-	return hw->phy.ops.write_phy_reg(hw, HV_LED_CONFIG,
+	return hw->phy.ops.write_reg(hw, HV_LED_CONFIG,
 					(u16)hw->mac.ledctl_mode1);
 }
 
@@ -3293,7 +3118,7 @@ static s32 e1000_setup_led_pchlan(struct e1000_hw *hw)
  **/
 static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw)
 {
-	return hw->phy.ops.write_phy_reg(hw, HV_LED_CONFIG,
+	return hw->phy.ops.write_reg(hw, HV_LED_CONFIG,
 					(u16)hw->mac.ledctl_default);
 }
 
@@ -3325,7 +3150,7 @@ static s32 e1000_led_on_pchlan(struct e1000_hw *hw)
 		}
 	}
 
-	return hw->phy.ops.write_phy_reg(hw, HV_LED_CONFIG, data);
+	return hw->phy.ops.write_reg(hw, HV_LED_CONFIG, data);
 }
 
 /**
@@ -3356,7 +3181,7 @@ static s32 e1000_led_off_pchlan(struct e1000_hw *hw)
 		}
 	}
 
-	return hw->phy.ops.write_phy_reg(hw, HV_LED_CONFIG, data);
+	return hw->phy.ops.write_reg(hw, HV_LED_CONFIG, data);
 }
 
 /**
@@ -3379,8 +3204,7 @@ static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw)
 		if (status & E1000_STATUS_PHYRA)
 			ew32(STATUS, status & ~E1000_STATUS_PHYRA);
 		else
-			hw_dbg(hw,
-			       "PHY Reset Asserted not set - needs delay\n");
+			e_dbg("PHY Reset Asserted not set - needs delay\n");
 	}
 
 	e1000e_get_cfg_done(hw);
@@ -3395,7 +3219,7 @@ static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw)
 	} else {
 		if (e1000_valid_nvm_bank_detect_ich8lan(hw, &bank)) {
 			/* Maybe we should do a basic PHY config */
-			hw_dbg(hw, "EEPROM not present\n");
+			e_dbg("EEPROM not present\n");
 			return -E1000_ERR_CONFIG;
 		}
 	}
@@ -3404,6 +3228,23 @@ static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw)
 }
 
 /**
+ * e1000_power_down_phy_copper_ich8lan - Remove link during PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, or wake on lan is not enabled, remove the link.
+ **/
+static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw)
+{
+	/* If the management interface is not enabled, then power down */
+	if (!(hw->mac.ops.check_mng_mode(hw) ||
+	      hw->phy.ops.check_reset_block(hw)))
+		e1000_power_down_phy_copper(hw);
+
+	return;
+}
+
+/**
  *  e1000_clear_hw_cntrs_ich8lan - Clear statistical counters
  *  @hw: pointer to the HW structure
  *
@@ -3412,42 +3253,41 @@ static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw)
  **/
 static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw)
 {
-	u32 temp;
 	u16 phy_data;
 
 	e1000e_clear_hw_cntrs_base(hw);
 
-	temp = er32(ALGNERRC);
-	temp = er32(RXERRC);
-	temp = er32(TNCRS);
-	temp = er32(CEXTERR);
-	temp = er32(TSCTC);
-	temp = er32(TSCTFC);
+	er32(ALGNERRC);
+	er32(RXERRC);
+	er32(TNCRS);
+	er32(CEXTERR);
+	er32(TSCTC);
+	er32(TSCTFC);
 
-	temp = er32(MGTPRC);
-	temp = er32(MGTPDC);
-	temp = er32(MGTPTC);
+	er32(MGTPRC);
+	er32(MGTPDC);
+	er32(MGTPTC);
 
-	temp = er32(IAC);
-	temp = er32(ICRXOC);
+	er32(IAC);
+	er32(ICRXOC);
 
 	/* Clear PHY statistics registers */
 	if ((hw->phy.type == e1000_phy_82578) ||
 	    (hw->phy.type == e1000_phy_82577)) {
-		hw->phy.ops.read_phy_reg(hw, HV_SCC_UPPER, &phy_data);
-		hw->phy.ops.read_phy_reg(hw, HV_SCC_LOWER, &phy_data);
-		hw->phy.ops.read_phy_reg(hw, HV_ECOL_UPPER, &phy_data);
-		hw->phy.ops.read_phy_reg(hw, HV_ECOL_LOWER, &phy_data);
-		hw->phy.ops.read_phy_reg(hw, HV_MCC_UPPER, &phy_data);
-		hw->phy.ops.read_phy_reg(hw, HV_MCC_LOWER, &phy_data);
-		hw->phy.ops.read_phy_reg(hw, HV_LATECOL_UPPER, &phy_data);
-		hw->phy.ops.read_phy_reg(hw, HV_LATECOL_LOWER, &phy_data);
-		hw->phy.ops.read_phy_reg(hw, HV_COLC_UPPER, &phy_data);
-		hw->phy.ops.read_phy_reg(hw, HV_COLC_LOWER, &phy_data);
-		hw->phy.ops.read_phy_reg(hw, HV_DC_UPPER, &phy_data);
-		hw->phy.ops.read_phy_reg(hw, HV_DC_LOWER, &phy_data);
-		hw->phy.ops.read_phy_reg(hw, HV_TNCRS_UPPER, &phy_data);
-		hw->phy.ops.read_phy_reg(hw, HV_TNCRS_LOWER, &phy_data);
+		hw->phy.ops.read_reg(hw, HV_SCC_UPPER, &phy_data);
+		hw->phy.ops.read_reg(hw, HV_SCC_LOWER, &phy_data);
+		hw->phy.ops.read_reg(hw, HV_ECOL_UPPER, &phy_data);
+		hw->phy.ops.read_reg(hw, HV_ECOL_LOWER, &phy_data);
+		hw->phy.ops.read_reg(hw, HV_MCC_UPPER, &phy_data);
+		hw->phy.ops.read_reg(hw, HV_MCC_LOWER, &phy_data);
+		hw->phy.ops.read_reg(hw, HV_LATECOL_UPPER, &phy_data);
+		hw->phy.ops.read_reg(hw, HV_LATECOL_LOWER, &phy_data);
+		hw->phy.ops.read_reg(hw, HV_COLC_UPPER, &phy_data);
+		hw->phy.ops.read_reg(hw, HV_COLC_LOWER, &phy_data);
+		hw->phy.ops.read_reg(hw, HV_DC_UPPER, &phy_data);
+		hw->phy.ops.read_reg(hw, HV_DC_LOWER, &phy_data);
+		hw->phy.ops.read_reg(hw, HV_TNCRS_UPPER, &phy_data);
+		hw->phy.ops.read_reg(hw, HV_TNCRS_LOWER, &phy_data);
 	}
 }
 
@@ -3470,29 +3310,27 @@ static struct e1000_mac_operations ich8_mac_ops = {
 };
 
 static struct e1000_phy_operations ich8_phy_ops = {
-	.acquire_phy		= e1000_acquire_swflag_ich8lan,
+	.acquire		= e1000_acquire_swflag_ich8lan,
 	.check_reset_block	= e1000_check_reset_block_ich8lan,
-	.commit_phy		= NULL,
-	.force_speed_duplex	= e1000_phy_force_speed_duplex_ich8lan,
+	.commit			= NULL,
 	.get_cfg_done		= e1000_get_cfg_done_ich8lan,
 	.get_cable_length	= e1000e_get_cable_length_igp_2,
-	.get_phy_info		= e1000_get_phy_info_ich8lan,
-	.read_phy_reg		= e1000e_read_phy_reg_igp,
-	.release_phy		= e1000_release_swflag_ich8lan,
-	.reset_phy		= e1000_phy_hw_reset_ich8lan,
+	.read_reg		= e1000e_read_phy_reg_igp,
+	.release		= e1000_release_swflag_ich8lan,
+	.reset			= e1000_phy_hw_reset_ich8lan,
 	.set_d0_lplu_state	= e1000_set_d0_lplu_state_ich8lan,
 	.set_d3_lplu_state	= e1000_set_d3_lplu_state_ich8lan,
-	.write_phy_reg		= e1000e_write_phy_reg_igp,
+	.write_reg		= e1000e_write_phy_reg_igp,
 };
 
 static struct e1000_nvm_operations ich8_nvm_ops = {
-	.acquire_nvm		= e1000_acquire_nvm_ich8lan,
-	.read_nvm	 	= e1000_read_nvm_ich8lan,
-	.release_nvm		= e1000_release_nvm_ich8lan,
-	.update_nvm		= e1000_update_nvm_checksum_ich8lan,
+	.acquire		= e1000_acquire_nvm_ich8lan,
+	.read		 	= e1000_read_nvm_ich8lan,
+	.release		= e1000_release_nvm_ich8lan,
+	.update			= e1000_update_nvm_checksum_ich8lan,
 	.valid_led_default	= e1000_valid_led_default_ich8lan,
-	.validate_nvm		= e1000_validate_nvm_checksum_ich8lan,
-	.write_nvm		= e1000_write_nvm_ich8lan,
+	.validate		= e1000_validate_nvm_checksum_ich8lan,
+	.write			= e1000_write_nvm_ich8lan,
 };
 
 struct e1000_info e1000_ich8_info = {
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index 99ba2b8a2a0..a86c17548c1 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2008 Intel Corporation.
+  Copyright(c) 1999 - 2009 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -26,11 +26,6 @@
 
 *******************************************************************************/
 
-#include <linux/netdevice.h>
-#include <linux/ethtool.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-
 #include "e1000.h"
 
 enum e1000_mng_mode {
@@ -87,7 +82,24 @@ s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw)
 }
 
 /**
- *  e1000e_write_vfta - Write value to VLAN filter table
+ *  e1000_clear_vfta_generic - Clear VLAN filter table
+ *  @hw: pointer to the HW structure
+ *
+ *  Clears the register array which contains the VLAN filter table by
+ *  setting all the values to 0.
+ **/
+void e1000_clear_vfta_generic(struct e1000_hw *hw)
+{
+	u32 offset;
+
+	for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
+		E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, 0);
+		e1e_flush();
+	}
+}
+
+/**
+ *  e1000_write_vfta_generic - Write value to VLAN filter table
  *  @hw: pointer to the HW structure
  *  @offset: register offset in VLAN filter table
  *  @value: register value written to VLAN filter table
@@ -95,7 +107,7 @@ s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw)
  *  Writes value at the given offset in the register array which stores
  *  the VLAN filter table.
  **/
-void e1000e_write_vfta(struct e1000_hw *hw, u32 offset, u32 value)
+void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value)
 {
 	E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, value);
 	e1e_flush();
@@ -115,12 +127,12 @@ void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count)
 	u32 i;
 
 	/* Setup the receive address */
-	hw_dbg(hw, "Programming MAC Address into RAR[0]\n");
+	e_dbg("Programming MAC Address into RAR[0]\n");
 
 	e1000e_rar_set(hw, hw->mac.addr, 0);
 
 	/* Zero out the other (rar_entry_count - 1) receive addresses */
-	hw_dbg(hw, "Clearing RAR[1-%u]\n", rar_count-1);
+	e_dbg("Clearing RAR[1-%u]\n", rar_count-1);
 	for (i = 1; i < rar_count; i++) {
 		E1000_WRITE_REG_ARRAY(hw, E1000_RA, (i << 1), 0);
 		e1e_flush();
@@ -276,7 +288,7 @@ void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw,
 	for (; mc_addr_count > 0; mc_addr_count--) {
 		u32 hash_value, hash_reg, hash_bit, mta;
 		hash_value = e1000_hash_mc_addr(hw, mc_addr_list);
-		hw_dbg(hw, "Hash value = 0x%03X\n", hash_value);
+		e_dbg("Hash value = 0x%03X\n", hash_value);
 		hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1);
 		hash_bit = hash_value & 0x1F;
 		mta = (1 << hash_bit);
@@ -300,45 +312,43 @@ void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw,
  **/
 void e1000e_clear_hw_cntrs_base(struct e1000_hw *hw)
 {
-	u32 temp;
-
-	temp = er32(CRCERRS);
-	temp = er32(SYMERRS);
-	temp = er32(MPC);
-	temp = er32(SCC);
-	temp = er32(ECOL);
-	temp = er32(MCC);
-	temp = er32(LATECOL);
-	temp = er32(COLC);
-	temp = er32(DC);
-	temp = er32(SEC);
-	temp = er32(RLEC);
-	temp = er32(XONRXC);
-	temp = er32(XONTXC);
-	temp = er32(XOFFRXC);
-	temp = er32(XOFFTXC);
-	temp = er32(FCRUC);
-	temp = er32(GPRC);
-	temp = er32(BPRC);
-	temp = er32(MPRC);
-	temp = er32(GPTC);
-	temp = er32(GORCL);
-	temp = er32(GORCH);
-	temp = er32(GOTCL);
-	temp = er32(GOTCH);
-	temp = er32(RNBC);
-	temp = er32(RUC);
-	temp = er32(RFC);
-	temp = er32(ROC);
-	temp = er32(RJC);
-	temp = er32(TORL);
-	temp = er32(TORH);
-	temp = er32(TOTL);
-	temp = er32(TOTH);
-	temp = er32(TPR);
-	temp = er32(TPT);
-	temp = er32(MPTC);
-	temp = er32(BPTC);
+	er32(CRCERRS);
+	er32(SYMERRS);
+	er32(MPC);
+	er32(SCC);
+	er32(ECOL);
+	er32(MCC);
+	er32(LATECOL);
+	er32(COLC);
+	er32(DC);
+	er32(SEC);
+	er32(RLEC);
+	er32(XONRXC);
+	er32(XONTXC);
+	er32(XOFFRXC);
+	er32(XOFFTXC);
+	er32(FCRUC);
+	er32(GPRC);
+	er32(BPRC);
+	er32(MPRC);
+	er32(GPTC);
+	er32(GORCL);
+	er32(GORCH);
+	er32(GOTCL);
+	er32(GOTCH);
+	er32(RNBC);
+	er32(RUC);
+	er32(RFC);
+	er32(ROC);
+	er32(RJC);
+	er32(TORL);
+	er32(TORH);
+	er32(TOTL);
+	er32(TOTH);
+	er32(TPR);
+	er32(TPT);
+	er32(MPTC);
+	er32(BPTC);
 }
 
 /**
@@ -376,7 +386,7 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
 	if (!link)
 		return ret_val; /* No link detected */
 
-	mac->get_link_status = 0;
+	mac->get_link_status = false;
 
 	/*
 	 * Check if there was DownShift, must be checked
@@ -408,7 +418,7 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
 	 */
 	ret_val = e1000e_config_fc_after_link_up(hw);
 	if (ret_val) {
-		hw_dbg(hw, "Error configuring flow control\n");
+		e_dbg("Error configuring flow control\n");
 	}
 
 	return ret_val;
@@ -448,7 +458,7 @@ s32 e1000e_check_for_fiber_link(struct e1000_hw *hw)
 			mac->autoneg_failed = 1;
 			return 0;
 		}
-		hw_dbg(hw, "NOT RXing /C/, disable AutoNeg and force link.\n");
+		e_dbg("NOT RXing /C/, disable AutoNeg and force link.\n");
 
 		/* Disable auto-negotiation in the TXCW register */
 		ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE));
@@ -461,7 +471,7 @@ s32 e1000e_check_for_fiber_link(struct e1000_hw *hw)
 		/* Configure Flow Control after forcing link up. */
 		ret_val = e1000e_config_fc_after_link_up(hw);
 		if (ret_val) {
-			hw_dbg(hw, "Error configuring flow control\n");
+			e_dbg("Error configuring flow control\n");
 			return ret_val;
 		}
 	} else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
@@ -471,7 +481,7 @@ s32 e1000e_check_for_fiber_link(struct e1000_hw *hw)
 		 * and disable forced link in the Device Control register
 		 * in an attempt to auto-negotiate with our link partner.
 		 */
-		hw_dbg(hw, "RXing /C/, enable AutoNeg and stop forcing link.\n");
+		e_dbg("RXing /C/, enable AutoNeg and stop forcing link.\n");
 		ew32(TXCW, mac->txcw);
 		ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
 
@@ -513,7 +523,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
 			mac->autoneg_failed = 1;
 			return 0;
 		}
-		hw_dbg(hw, "NOT RXing /C/, disable AutoNeg and force link.\n");
+		e_dbg("NOT RXing /C/, disable AutoNeg and force link.\n");
 
 		/* Disable auto-negotiation in the TXCW register */
 		ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE));
@@ -526,7 +536,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
 		/* Configure Flow Control after forcing link up. */
 		ret_val = e1000e_config_fc_after_link_up(hw);
 		if (ret_val) {
-			hw_dbg(hw, "Error configuring flow control\n");
+			e_dbg("Error configuring flow control\n");
 			return ret_val;
 		}
 	} else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
@@ -536,7 +546,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
 		 * and disable forced link in the Device Control register
 		 * in an attempt to auto-negotiate with our link partner.
 		 */
-		hw_dbg(hw, "RXing /C/, enable AutoNeg and stop forcing link.\n");
+		e_dbg("RXing /C/, enable AutoNeg and stop forcing link.\n");
 		ew32(TXCW, mac->txcw);
 		ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
 
@@ -553,11 +563,11 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
 		if (rxcw & E1000_RXCW_SYNCH) {
 			if (!(rxcw & E1000_RXCW_IV)) {
 				mac->serdes_has_link = true;
-				hw_dbg(hw, "SERDES: Link up - forced.\n");
+				e_dbg("SERDES: Link up - forced.\n");
 			}
 		} else {
 			mac->serdes_has_link = false;
-			hw_dbg(hw, "SERDES: Link down - force failed.\n");
+			e_dbg("SERDES: Link down - force failed.\n");
 		}
 	}
 
@@ -570,20 +580,20 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
 			if (rxcw & E1000_RXCW_SYNCH) {
 				if (!(rxcw & E1000_RXCW_IV)) {
 					mac->serdes_has_link = true;
-					hw_dbg(hw, "SERDES: Link up - autoneg "
+					e_dbg("SERDES: Link up - autoneg "
 					   "completed sucessfully.\n");
 				} else {
 					mac->serdes_has_link = false;
-					hw_dbg(hw, "SERDES: Link down - invalid"
+					e_dbg("SERDES: Link down - invalid"
 					   "codewords detected in autoneg.\n");
 				}
 			} else {
 				mac->serdes_has_link = false;
-				hw_dbg(hw, "SERDES: Link down - no sync.\n");
+				e_dbg("SERDES: Link down - no sync.\n");
 			}
 		} else {
 			mac->serdes_has_link = false;
-			hw_dbg(hw, "SERDES: Link down - autoneg failed\n");
+			e_dbg("SERDES: Link down - autoneg failed\n");
 		}
 	}
 
@@ -614,7 +624,7 @@ static s32 e1000_set_default_fc_generic(struct e1000_hw *hw)
 	ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &nvm_data);
 
 	if (ret_val) {
-		hw_dbg(hw, "NVM Read Error\n");
+		e_dbg("NVM Read Error\n");
 		return ret_val;
 	}
 
@@ -667,7 +677,7 @@ s32 e1000e_setup_link(struct e1000_hw *hw)
 	 */
 	hw->fc.current_mode = hw->fc.requested_mode;
 
-	hw_dbg(hw, "After fix-ups FlowControl is now = %x\n",
+	e_dbg("After fix-ups FlowControl is now = %x\n",
 		hw->fc.current_mode);
 
 	/* Call the necessary media_type subroutine to configure the link. */
@@ -681,7 +691,7 @@ s32 e1000e_setup_link(struct e1000_hw *hw)
 	 * control is disabled, because it does not hurt anything to
 	 * initialize these registers.
 	 */
-	hw_dbg(hw, "Initializing the Flow Control address, type and timer regs\n");
+	e_dbg("Initializing the Flow Control address, type and timer regs\n");
 	ew32(FCT, FLOW_CONTROL_TYPE);
 	ew32(FCAH, FLOW_CONTROL_ADDRESS_HIGH);
 	ew32(FCAL, FLOW_CONTROL_ADDRESS_LOW);
@@ -751,7 +761,7 @@ static s32 e1000_commit_fc_settings_generic(struct e1000_hw *hw)
 		txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
 		break;
 	default:
-		hw_dbg(hw, "Flow control param set incorrectly\n");
+		e_dbg("Flow control param set incorrectly\n");
 		return -E1000_ERR_CONFIG;
 		break;
 	}
@@ -789,7 +799,7 @@ static s32 e1000_poll_fiber_serdes_link_generic(struct e1000_hw *hw)
 			break;
 	}
 	if (i == FIBER_LINK_UP_LIMIT) {
-		hw_dbg(hw, "Never got a valid link from auto-neg!!!\n");
+		e_dbg("Never got a valid link from auto-neg!!!\n");
 		mac->autoneg_failed = 1;
 		/*
 		 * AutoNeg failed to achieve a link, so we'll call
@@ -799,13 +809,13 @@ static s32 e1000_poll_fiber_serdes_link_generic(struct e1000_hw *hw)
 		 */
 		ret_val = mac->ops.check_for_link(hw);
 		if (ret_val) {
-			hw_dbg(hw, "Error while checking for link\n");
+			e_dbg("Error while checking for link\n");
 			return ret_val;
 		}
 		mac->autoneg_failed = 0;
 	} else {
 		mac->autoneg_failed = 0;
-		hw_dbg(hw, "Valid Link Found\n");
+		e_dbg("Valid Link Found\n");
 	}
 
 	return 0;
@@ -841,7 +851,7 @@ s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw)
 	 * then the link-up status bit will be set and the flow control enable
 	 * bits (RFCE and TFCE) will be set according to their negotiated value.
 	 */
-	hw_dbg(hw, "Auto-negotiation enabled\n");
+	e_dbg("Auto-negotiation enabled\n");
 
 	ew32(CTRL, ctrl);
 	e1e_flush();
@@ -856,7 +866,7 @@ s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw)
 	    (er32(CTRL) & E1000_CTRL_SWDPIN1)) {
 		ret_val = e1000_poll_fiber_serdes_link_generic(hw);
 	} else {
-		hw_dbg(hw, "No signal detected\n");
+		e_dbg("No signal detected\n");
 	}
 
 	return 0;
@@ -952,7 +962,7 @@ s32 e1000e_force_mac_fc(struct e1000_hw *hw)
 	 *      3:  Both Rx and Tx flow control (symmetric) is enabled.
 	 *  other:  No other values should be possible at this point.
 	 */
-	hw_dbg(hw, "hw->fc.current_mode = %u\n", hw->fc.current_mode);
+	e_dbg("hw->fc.current_mode = %u\n", hw->fc.current_mode);
 
 	switch (hw->fc.current_mode) {
 	case e1000_fc_none:
@@ -970,7 +980,7 @@ s32 e1000e_force_mac_fc(struct e1000_hw *hw)
 		ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE);
 		break;
 	default:
-		hw_dbg(hw, "Flow control param set incorrectly\n");
+		e_dbg("Flow control param set incorrectly\n");
 		return -E1000_ERR_CONFIG;
 	}
 
@@ -1011,7 +1021,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
 	}
 
 	if (ret_val) {
-		hw_dbg(hw, "Error forcing flow control settings\n");
+		e_dbg("Error forcing flow control settings\n");
 		return ret_val;
 	}
 
@@ -1035,7 +1045,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
 			return ret_val;
 
 		if (!(mii_status_reg & MII_SR_AUTONEG_COMPLETE)) {
-			hw_dbg(hw, "Copper PHY and Auto Neg "
+			e_dbg("Copper PHY and Auto Neg "
 				 "has not completed.\n");
 			return ret_val;
 		}
@@ -1076,7 +1086,6 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
 		 *   1   |    1    |   0   |    0    | e1000_fc_none
 		 *   1   |    1    |   0   |    1    | e1000_fc_rx_pause
 		 *
-		 *
 		 * Are both PAUSE bits set to 1?  If so, this implies
 		 * Symmetric Flow Control is enabled at both ends.  The
 		 * ASM_DIR bits are irrelevant per the spec.
@@ -1100,10 +1109,10 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
 			 */
 			if (hw->fc.requested_mode == e1000_fc_full) {
 				hw->fc.current_mode = e1000_fc_full;
-				hw_dbg(hw, "Flow Control = FULL.\r\n");
+				e_dbg("Flow Control = FULL.\r\n");
 			} else {
 				hw->fc.current_mode = e1000_fc_rx_pause;
-				hw_dbg(hw, "Flow Control = "
+				e_dbg("Flow Control = "
 					 "RX PAUSE frames only.\r\n");
 			}
 		}
@@ -1114,14 +1123,13 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
 		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
 		 *-------|---------|-------|---------|--------------------
 		 *   0   |    1    |   1   |    1    | e1000_fc_tx_pause
-		 *
 		 */
 		else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) &&
 			  (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
 			  (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
 			  (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
 			hw->fc.current_mode = e1000_fc_tx_pause;
-			hw_dbg(hw, "Flow Control = Tx PAUSE frames only.\r\n");
+			e_dbg("Flow Control = Tx PAUSE frames only.\r\n");
 		}
 		/*
 		 * For transmitting PAUSE frames ONLY.
@@ -1130,21 +1138,20 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
 		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
 		 *-------|---------|-------|---------|--------------------
 		 *   1   |    1    |   0   |    1    | e1000_fc_rx_pause
-		 *
 		 */
 		else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
 			 (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
 			 !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
 			 (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
 			hw->fc.current_mode = e1000_fc_rx_pause;
-			hw_dbg(hw, "Flow Control = Rx PAUSE frames only.\r\n");
+			e_dbg("Flow Control = Rx PAUSE frames only.\r\n");
 		} else {
 			/*
 			 * Per the IEEE spec, at this point flow control
 			 * should be disabled.
 			 */
 			hw->fc.current_mode = e1000_fc_none;
-			hw_dbg(hw, "Flow Control = NONE.\r\n");
+			e_dbg("Flow Control = NONE.\r\n");
 		}
 
 		/*
@@ -1154,7 +1161,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
 		 */
 		ret_val = mac->ops.get_link_up_info(hw, &speed, &duplex);
 		if (ret_val) {
-			hw_dbg(hw, "Error getting link speed and duplex\n");
+			e_dbg("Error getting link speed and duplex\n");
 			return ret_val;
 		}
 
@@ -1167,7 +1174,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
 		 */
 		ret_val = e1000e_force_mac_fc(hw);
 		if (ret_val) {
-			hw_dbg(hw, "Error forcing flow control settings\n");
+			e_dbg("Error forcing flow control settings\n");
 			return ret_val;
 		}
 	}
@@ -1191,21 +1198,21 @@ s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *dup
 	status = er32(STATUS);
 	if (status & E1000_STATUS_SPEED_1000) {
 		*speed = SPEED_1000;
-		hw_dbg(hw, "1000 Mbs, ");
+		e_dbg("1000 Mbs, ");
 	} else if (status & E1000_STATUS_SPEED_100) {
 		*speed = SPEED_100;
-		hw_dbg(hw, "100 Mbs, ");
+		e_dbg("100 Mbs, ");
 	} else {
 		*speed = SPEED_10;
-		hw_dbg(hw, "10 Mbs, ");
+		e_dbg("10 Mbs, ");
 	}
 
 	if (status & E1000_STATUS_FD) {
 		*duplex = FULL_DUPLEX;
-		hw_dbg(hw, "Full Duplex\n");
+		e_dbg("Full Duplex\n");
 	} else {
 		*duplex = HALF_DUPLEX;
-		hw_dbg(hw, "Half Duplex\n");
+		e_dbg("Half Duplex\n");
 	}
 
 	return 0;
@@ -1251,7 +1258,7 @@ s32 e1000e_get_hw_semaphore(struct e1000_hw *hw)
 	}
 
 	if (i == timeout) {
-		hw_dbg(hw, "Driver can't access device - SMBI bit is set.\n");
+		e_dbg("Driver can't access device - SMBI bit is set.\n");
 		return -E1000_ERR_NVM;
 	}
 
@@ -1270,7 +1277,7 @@ s32 e1000e_get_hw_semaphore(struct e1000_hw *hw)
 	if (i == timeout) {
 		/* Release semaphores */
 		e1000e_put_hw_semaphore(hw);
-		hw_dbg(hw, "Driver can't access the NVM\n");
+		e_dbg("Driver can't access the NVM\n");
 		return -E1000_ERR_NVM;
 	}
 
@@ -1310,7 +1317,7 @@ s32 e1000e_get_auto_rd_done(struct e1000_hw *hw)
 	}
 
 	if (i == AUTO_READ_DONE_TIMEOUT) {
-		hw_dbg(hw, "Auto read by HW from NVM has not completed.\n");
+		e_dbg("Auto read by HW from NVM has not completed.\n");
 		return -E1000_ERR_RESET;
 	}
 
@@ -1331,7 +1338,7 @@ s32 e1000e_valid_led_default(struct e1000_hw *hw, u16 *data)
 
 	ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data);
 	if (ret_val) {
-		hw_dbg(hw, "NVM Read Error\n");
+		e_dbg("NVM Read Error\n");
 		return ret_val;
 	}
 
@@ -1585,7 +1592,7 @@ s32 e1000e_disable_pcie_master(struct e1000_hw *hw)
 	}
 
 	if (!timeout) {
-		hw_dbg(hw, "Master requests are pending.\n");
+		e_dbg("Master requests are pending.\n");
 		return -E1000_ERR_MASTER_REQUESTS_PENDING;
 	}
 
@@ -1608,7 +1615,7 @@ void e1000e_reset_adaptive(struct e1000_hw *hw)
 	mac->ifs_step_size = IFS_STEP;
 	mac->ifs_ratio = IFS_RATIO;
 
-	mac->in_ifs_mode = 0;
+	mac->in_ifs_mode = false;
 	ew32(AIT, 0);
 }
 
@@ -1625,7 +1632,7 @@ void e1000e_update_adaptive(struct e1000_hw *hw)
 
 	if ((mac->collision_delta * mac->ifs_ratio) > mac->tx_packet_delta) {
 		if (mac->tx_packet_delta > MIN_NUM_XMITS) {
-			mac->in_ifs_mode = 1;
+			mac->in_ifs_mode = true;
 			if (mac->current_ifs_val < mac->ifs_max_val) {
 				if (!mac->current_ifs_val)
 					mac->current_ifs_val = mac->ifs_min_val;
@@ -1639,7 +1646,7 @@ void e1000e_update_adaptive(struct e1000_hw *hw)
 		if (mac->in_ifs_mode &&
 		    (mac->tx_packet_delta <= MIN_NUM_XMITS)) {
 			mac->current_ifs_val = 0;
-			mac->in_ifs_mode = 0;
+			mac->in_ifs_mode = false;
 			ew32(AIT, 0);
 		}
 	}
@@ -1809,7 +1816,7 @@ s32 e1000e_acquire_nvm(struct e1000_hw *hw)
 	if (!timeout) {
 		eecd &= ~E1000_EECD_REQ;
 		ew32(EECD, eecd);
-		hw_dbg(hw, "Could not acquire NVM grant\n");
+		e_dbg("Could not acquire NVM grant\n");
 		return -E1000_ERR_NVM;
 	}
 
@@ -1914,7 +1921,7 @@ static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw)
 		}
 
 		if (!timeout) {
-			hw_dbg(hw, "SPI NVM Status error\n");
+			e_dbg("SPI NVM Status error\n");
 			return -E1000_ERR_NVM;
 		}
 	}
@@ -1943,7 +1950,7 @@ s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
 	 */
 	if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
 	    (words == 0)) {
-		hw_dbg(hw, "nvm parameter(s) out of bounds\n");
+		e_dbg("nvm parameter(s) out of bounds\n");
 		return -E1000_ERR_NVM;
 	}
 
@@ -1986,11 +1993,11 @@ s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
 	 */
 	if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
 	    (words == 0)) {
-		hw_dbg(hw, "nvm parameter(s) out of bounds\n");
+		e_dbg("nvm parameter(s) out of bounds\n");
 		return -E1000_ERR_NVM;
 	}
 
-	ret_val = nvm->ops.acquire_nvm(hw);
+	ret_val = nvm->ops.acquire(hw);
 	if (ret_val)
 		return ret_val;
 
@@ -2001,7 +2008,7 @@ s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
 
 		ret_val = e1000_ready_nvm_eeprom(hw);
 		if (ret_val) {
-			nvm->ops.release_nvm(hw);
+			nvm->ops.release(hw);
 			return ret_val;
 		}
 
@@ -2040,7 +2047,7 @@ s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
 	}
 
 	msleep(10);
-	nvm->ops.release_nvm(hw);
+	nvm->ops.release(hw);
 	return 0;
 }
 
@@ -2066,7 +2073,7 @@ s32 e1000e_read_mac_addr(struct e1000_hw *hw)
 		ret_val = e1000_read_nvm(hw, NVM_ALT_MAC_ADDR_PTR, 1,
 					 &mac_addr_offset);
 		if (ret_val) {
-			hw_dbg(hw, "NVM Read Error\n");
+			e_dbg("NVM Read Error\n");
 			return ret_val;
 		}
 		if (mac_addr_offset == 0xFFFF)
@@ -2081,7 +2088,7 @@ s32 e1000e_read_mac_addr(struct e1000_hw *hw)
 			ret_val = e1000_read_nvm(hw, mac_addr_offset, 1,
 						 &nvm_data);
 			if (ret_val) {
-				hw_dbg(hw, "NVM Read Error\n");
+				e_dbg("NVM Read Error\n");
 				return ret_val;
 			}
 			if (nvm_data & 0x0001)
@@ -2096,7 +2103,7 @@ s32 e1000e_read_mac_addr(struct e1000_hw *hw)
 		offset = mac_addr_offset + (i >> 1);
 		ret_val = e1000_read_nvm(hw, offset, 1, &nvm_data);
 		if (ret_val) {
-			hw_dbg(hw, "NVM Read Error\n");
+			e_dbg("NVM Read Error\n");
 			return ret_val;
 		}
 		hw->mac.perm_addr[i] = (u8)(nvm_data & 0xFF);
@@ -2129,14 +2136,14 @@ s32 e1000e_validate_nvm_checksum_generic(struct e1000_hw *hw)
 	for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) {
 		ret_val = e1000_read_nvm(hw, i, 1, &nvm_data);
 		if (ret_val) {
-			hw_dbg(hw, "NVM Read Error\n");
+			e_dbg("NVM Read Error\n");
 			return ret_val;
 		}
 		checksum += nvm_data;
 	}
 
 	if (checksum != (u16) NVM_SUM) {
-		hw_dbg(hw, "NVM Checksum Invalid\n");
+		e_dbg("NVM Checksum Invalid\n");
 		return -E1000_ERR_NVM;
 	}
 
@@ -2160,7 +2167,7 @@ s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw)
 	for (i = 0; i < NVM_CHECKSUM_REG; i++) {
 		ret_val = e1000_read_nvm(hw, i, 1, &nvm_data);
 		if (ret_val) {
-			hw_dbg(hw, "NVM Read Error while updating checksum.\n");
+			e_dbg("NVM Read Error while updating checksum.\n");
 			return ret_val;
 		}
 		checksum += nvm_data;
@@ -2168,7 +2175,7 @@ s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw)
 	checksum = (u16) NVM_SUM - checksum;
 	ret_val = e1000_write_nvm(hw, NVM_CHECKSUM_REG, 1, &checksum);
 	if (ret_val)
-		hw_dbg(hw, "NVM Write Error while updating checksum.\n");
+		e_dbg("NVM Write Error while updating checksum.\n");
 
 	return ret_val;
 }
@@ -2231,7 +2238,7 @@ static s32 e1000_mng_enable_host_if(struct e1000_hw *hw)
 	/* Check that the host interface is enabled. */
 	hicr = er32(HICR);
 	if ((hicr & E1000_HICR_EN) == 0) {
-		hw_dbg(hw, "E1000_HOST_EN bit disabled.\n");
+		e_dbg("E1000_HOST_EN bit disabled.\n");
 		return -E1000_ERR_HOST_INTERFACE_COMMAND;
 	}
 	/* check the previous command is completed */
@@ -2243,7 +2250,7 @@ static s32 e1000_mng_enable_host_if(struct e1000_hw *hw)
 	}
 
 	if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) {
-		hw_dbg(hw, "Previous command timeout failed .\n");
+		e_dbg("Previous command timeout failed .\n");
 		return -E1000_ERR_HOST_INTERFACE_COMMAND;
 	}
 
@@ -2282,7 +2289,7 @@ bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw)
 
 	/* No manageability, no filtering */
 	if (!e1000e_check_mng_mode(hw)) {
-		hw->mac.tx_pkt_filtering = 0;
+		hw->mac.tx_pkt_filtering = false;
 		return 0;
 	}
 
@@ -2292,7 +2299,7 @@ bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw)
 	 */
 	ret_val = e1000_mng_enable_host_if(hw);
 	if (ret_val != 0) {
-		hw->mac.tx_pkt_filtering = 0;
+		hw->mac.tx_pkt_filtering = false;
 		return ret_val;
 	}
 
@@ -2311,17 +2318,17 @@ bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw)
 	 * take the safe route of assuming Tx filtering is enabled.
 	 */
 	if ((hdr_csum != csum) || (hdr->signature != E1000_IAMT_SIGNATURE)) {
-		hw->mac.tx_pkt_filtering = 1;
+		hw->mac.tx_pkt_filtering = true;
 		return 1;
 	}
 
 	/* Cookie area is valid, make the final check for filtering. */
 	if (!(hdr->status & E1000_MNG_DHCP_COOKIE_STATUS_PARSING)) {
-		hw->mac.tx_pkt_filtering = 0;
+		hw->mac.tx_pkt_filtering = false;
 		return 0;
 	}
 
-	hw->mac.tx_pkt_filtering = 1;
+	hw->mac.tx_pkt_filtering = true;
 	return 1;
 }
 
@@ -2353,7 +2360,7 @@ static s32 e1000_mng_write_cmd_header(struct e1000_hw *hw,
 }
 
 /**
- *  e1000_mng_host_if_write - Writes to the manageability host interface
+ *  e1000_mng_host_if_write - Write to the manageability host interface
  *  @hw: pointer to the HW structure
  *  @buffer: pointer to the host interface buffer
  *  @length: size of the buffer
@@ -2478,7 +2485,7 @@ bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw)
 {
 	u32 manc;
 	u32 fwsm, factps;
-	bool ret_val = 0;
+	bool ret_val = false;
 
 	manc = er32(MANC);
 
@@ -2493,13 +2500,13 @@ bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw)
 		if (!(factps & E1000_FACTPS_MNGCG) &&
 		    ((fwsm & E1000_FWSM_MODE_MASK) ==
 		     (e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT))) {
-			ret_val = 1;
+			ret_val = true;
 			return ret_val;
 		}
 	} else {
 		if ((manc & E1000_MANC_SMBUS_EN) &&
 		    !(manc & E1000_MANC_ASF_EN)) {
-			ret_val = 1;
+			ret_val = true;
 			return ret_val;
 		}
 	}
@@ -2514,14 +2521,14 @@ s32 e1000e_read_pba_num(struct e1000_hw *hw, u32 *pba_num)
 
 	ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_0, 1, &nvm_data);
 	if (ret_val) {
-		hw_dbg(hw, "NVM Read Error\n");
+		e_dbg("NVM Read Error\n");
 		return ret_val;
 	}
 	*pba_num = (u32)(nvm_data << 16);
 
 	ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_1, 1, &nvm_data);
 	if (ret_val) {
-		hw_dbg(hw, "NVM Read Error\n");
+		e_dbg("NVM Read Error\n");
 		return ret_val;
 	}
 	*pba_num |= nvm_data;
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index fad8f9ea004..c3105c5087e 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2008 Intel Corporation.
+  Copyright(c) 1999 - 2009 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -65,17 +65,6 @@ static const struct e1000_info *e1000_info_tbl[] = {
 	[board_pchlan]		= &e1000_pch_info,
 };
 
-#ifdef DEBUG
-/**
- * e1000_get_hw_dev_name - return device name string
- * used by hardware layer to print debugging information
- **/
-char *e1000e_get_hw_dev_name(struct e1000_hw *hw)
-{
-	return hw->adapter->netdev->name;
-}
-#endif
-
 /**
  * e1000_desc_unused - calculate if we have unused descriptors
  **/
@@ -167,7 +156,7 @@ static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
 	struct e1000_buffer *buffer_info;
 	struct sk_buff *skb;
 	unsigned int i;
-	unsigned int bufsz = adapter->rx_buffer_len + NET_IP_ALIGN;
+	unsigned int bufsz = adapter->rx_buffer_len;
 
 	i = rx_ring->next_to_use;
 	buffer_info = &rx_ring->buffer_info[i];
@@ -179,20 +168,13 @@ static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
 			goto map_skb;
 		}
 
-		skb = netdev_alloc_skb(netdev, bufsz);
+		skb = netdev_alloc_skb_ip_align(netdev, bufsz);
 		if (!skb) {
 			/* Better luck next round */
 			adapter->alloc_rx_buff_failed++;
 			break;
 		}
 
-		/*
-		 * Make buffer alignment 2 beyond a 16 byte boundary
-		 * this will result in a 16 byte aligned IP header after
-		 * the 14 byte MAC header is removed
-		 */
-		skb_reserve(skb, NET_IP_ALIGN);
-
 		buffer_info->skb = skb;
 map_skb:
 		buffer_info->dma = pci_map_single(pdev, skb->data,
@@ -284,21 +266,14 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
 			     cpu_to_le64(ps_page->dma);
 		}
 
-		skb = netdev_alloc_skb(netdev,
-				       adapter->rx_ps_bsize0 + NET_IP_ALIGN);
+		skb = netdev_alloc_skb_ip_align(netdev,
+						adapter->rx_ps_bsize0);
 
 		if (!skb) {
 			adapter->alloc_rx_buff_failed++;
 			break;
 		}
 
-		/*
-		 * Make buffer alignment 2 beyond a 16 byte boundary
-		 * this will result in a 16 byte aligned IP header after
-		 * the 14 byte MAC header is removed
-		 */
-		skb_reserve(skb, NET_IP_ALIGN);
-
 		buffer_info->skb = skb;
 		buffer_info->dma = pci_map_single(pdev, skb->data,
 						  adapter->rx_ps_bsize0,
@@ -359,9 +334,7 @@ static void e1000_alloc_jumbo_rx_buffers(struct e1000_adapter *adapter,
 	struct e1000_buffer *buffer_info;
 	struct sk_buff *skb;
 	unsigned int i;
-	unsigned int bufsz = 256 -
-	                     16 /* for skb_reserve */ -
-	                     NET_IP_ALIGN;
+	unsigned int bufsz = 256 - 16 /* for skb_reserve */;
 
 	i = rx_ring->next_to_use;
 	buffer_info = &rx_ring->buffer_info[i];
@@ -373,19 +346,13 @@ static void e1000_alloc_jumbo_rx_buffers(struct e1000_adapter *adapter,
 			goto check_page;
 		}
 
-		skb = netdev_alloc_skb(netdev, bufsz);
+		skb = netdev_alloc_skb_ip_align(netdev, bufsz);
 		if (unlikely(!skb)) {
 			/* Better luck next round */
 			adapter->alloc_rx_buff_failed++;
 			break;
 		}
 
-		/* Make buffer alignment 2 beyond a 16 byte boundary
-		 * this will result in a 16 byte aligned IP header after
-		 * the 14 byte MAC header is removed
-		 */
-		skb_reserve(skb, NET_IP_ALIGN);
-
 		buffer_info->skb = skb;
 check_page:
 		/* allocate a new page if necessary */
@@ -437,6 +404,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 {
 	struct net_device *netdev = adapter->netdev;
 	struct pci_dev *pdev = adapter->pdev;
+	struct e1000_hw *hw = &adapter->hw;
 	struct e1000_ring *rx_ring = adapter->rx_ring;
 	struct e1000_rx_desc *rx_desc, *next_rxd;
 	struct e1000_buffer *buffer_info, *next_buffer;
@@ -486,8 +454,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 		 * packet, also make sure the frame isn't just CRC only */
 		if (!(status & E1000_RXD_STAT_EOP) || (length <= 4)) {
 			/* All receives must fit into a single buffer */
-			e_dbg("%s: Receive packet consumed multiple buffers\n",
-			      netdev->name);
+			e_dbg("Receive packet consumed multiple buffers\n");
 			/* recycle */
 			buffer_info->skb = skb;
 			goto next_desc;
@@ -513,9 +480,8 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 		 */
 		if (length < copybreak) {
 			struct sk_buff *new_skb =
-			    netdev_alloc_skb(netdev, length + NET_IP_ALIGN);
+			    netdev_alloc_skb_ip_align(netdev, length);
 			if (new_skb) {
-				skb_reserve(new_skb, NET_IP_ALIGN);
 				skb_copy_to_linear_data_offset(new_skb,
 							       -NET_IP_ALIGN,
 							       (skb->data -
@@ -560,33 +526,52 @@ next_desc:
 
 	adapter->total_rx_bytes += total_rx_bytes;
 	adapter->total_rx_packets += total_rx_packets;
-	adapter->net_stats.rx_bytes += total_rx_bytes;
-	adapter->net_stats.rx_packets += total_rx_packets;
+	netdev->stats.rx_bytes += total_rx_bytes;
+	netdev->stats.rx_packets += total_rx_packets;
 	return cleaned;
 }
 
 static void e1000_put_txbuf(struct e1000_adapter *adapter,
 			     struct e1000_buffer *buffer_info)
 {
-	buffer_info->dma = 0;
+	if (buffer_info->dma) {
+		if (buffer_info->mapped_as_page)
+			pci_unmap_page(adapter->pdev, buffer_info->dma,
+				       buffer_info->length, PCI_DMA_TODEVICE);
+		else
+			pci_unmap_single(adapter->pdev,	buffer_info->dma,
+					 buffer_info->length,
+					 PCI_DMA_TODEVICE);
+		buffer_info->dma = 0;
+	}
 	if (buffer_info->skb) {
-		skb_dma_unmap(&adapter->pdev->dev, buffer_info->skb,
-		              DMA_TO_DEVICE);
 		dev_kfree_skb_any(buffer_info->skb);
 		buffer_info->skb = NULL;
 	}
 	buffer_info->time_stamp = 0;
 }
 
-static void e1000_print_tx_hang(struct e1000_adapter *adapter)
+static void e1000_print_hw_hang(struct work_struct *work)
 {
+	struct e1000_adapter *adapter = container_of(work,
+	                                             struct e1000_adapter,
+	                                             print_hang_task);
 	struct e1000_ring *tx_ring = adapter->tx_ring;
 	unsigned int i = tx_ring->next_to_clean;
 	unsigned int eop = tx_ring->buffer_info[i].next_to_watch;
 	struct e1000_tx_desc *eop_desc = E1000_TX_DESC(*tx_ring, eop);
+	struct e1000_hw *hw = &adapter->hw;
+	u16 phy_status, phy_1000t_status, phy_ext_status;
+	u16 pci_status;
 
-	/* detected Tx unit hang */
-	e_err("Detected Tx Unit Hang:\n"
+	e1e_rphy(hw, PHY_STATUS, &phy_status);
+	e1e_rphy(hw, PHY_1000T_STATUS, &phy_1000t_status);
+	e1e_rphy(hw, PHY_EXT_STATUS, &phy_ext_status);
+
+	pci_read_config_word(adapter->pdev, PCI_STATUS, &pci_status);
+
+	/* detected Hardware unit hang */
+	e_err("Detected Hardware Unit Hang:\n"
 	      "  TDH                  <%x>\n"
 	      "  TDT                  <%x>\n"
 	      "  next_to_use          <%x>\n"
@@ -595,7 +580,12 @@ static void e1000_print_tx_hang(struct e1000_adapter *adapter)
 	      "  time_stamp           <%lx>\n"
 	      "  next_to_watch        <%x>\n"
 	      "  jiffies              <%lx>\n"
-	      "  next_to_watch.status <%x>\n",
+	      "  next_to_watch.status <%x>\n"
+	      "MAC Status             <%x>\n"
+	      "PHY Status             <%x>\n"
+	      "PHY 1000BASE-T Status  <%x>\n"
+	      "PHY Extended Status    <%x>\n"
+	      "PCI Status             <%x>\n",
 	      readl(adapter->hw.hw_addr + tx_ring->head),
 	      readl(adapter->hw.hw_addr + tx_ring->tail),
 	      tx_ring->next_to_use,
@@ -603,7 +593,12 @@ static void e1000_print_tx_hang(struct e1000_adapter *adapter)
 	      tx_ring->buffer_info[eop].time_stamp,
 	      eop,
 	      jiffies,
-	      eop_desc->upper.fields.status);
+	      eop_desc->upper.fields.status,
+	      er32(STATUS),
+	      phy_status,
+	      phy_1000t_status,
+	      phy_ext_status,
+	      pci_status);
 }
 
 /**
@@ -677,21 +672,23 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter)
 	}
 
 	if (adapter->detect_tx_hung) {
-		/* Detect a transmit hang in hardware, this serializes the
-		 * check with the clearing of time_stamp and movement of i */
+		/*
+		 * Detect a transmit hang in hardware, this serializes the
+		 * check with the clearing of time_stamp and movement of i
+		 */
 		adapter->detect_tx_hung = 0;
 		if (tx_ring->buffer_info[i].time_stamp &&
 		    time_after(jiffies, tx_ring->buffer_info[i].time_stamp
-			       + (adapter->tx_timeout_factor * HZ))
-		    && !(er32(STATUS) & E1000_STATUS_TXOFF)) {
-			e1000_print_tx_hang(adapter);
+			       + (adapter->tx_timeout_factor * HZ)) &&
+		    !(er32(STATUS) & E1000_STATUS_TXOFF)) {
+			schedule_work(&adapter->print_hang_task);
 			netif_stop_queue(netdev);
 		}
 	}
 	adapter->total_tx_bytes += total_tx_bytes;
 	adapter->total_tx_packets += total_tx_packets;
-	adapter->net_stats.tx_bytes += total_tx_bytes;
-	adapter->net_stats.tx_packets += total_tx_packets;
+	netdev->stats.tx_bytes += total_tx_bytes;
+	netdev->stats.tx_packets += total_tx_packets;
 	return (count < tx_ring->count);
 }
 
@@ -705,6 +702,7 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter)
 static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 				  int *work_done, int work_to_do)
 {
+	struct e1000_hw *hw = &adapter->hw;
 	union e1000_rx_desc_packet_split *rx_desc, *next_rxd;
 	struct net_device *netdev = adapter->netdev;
 	struct pci_dev *pdev = adapter->pdev;
@@ -748,8 +746,8 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 		buffer_info->dma = 0;
 
 		if (!(staterr & E1000_RXD_STAT_EOP)) {
-			e_dbg("%s: Packet Split buffers didn't pick up the "
-			      "full packet\n", netdev->name);
+			e_dbg("Packet Split buffers didn't pick up the full "
+			      "packet\n");
 			dev_kfree_skb_irq(skb);
 			goto next_desc;
 		}
@@ -762,8 +760,8 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 		length = le16_to_cpu(rx_desc->wb.middle.length0);
 
 		if (!length) {
-			e_dbg("%s: Last part of the packet spanning multiple "
-			      "descriptors\n", netdev->name);
+			e_dbg("Last part of the packet spanning multiple "
+			      "descriptors\n");
 			dev_kfree_skb_irq(skb);
 			goto next_desc;
 		}
@@ -871,8 +869,8 @@ next_desc:
 
 	adapter->total_rx_bytes += total_rx_bytes;
 	adapter->total_rx_packets += total_rx_packets;
-	adapter->net_stats.rx_bytes += total_rx_bytes;
-	adapter->net_stats.rx_packets += total_rx_packets;
+	netdev->stats.rx_bytes += total_rx_bytes;
+	netdev->stats.rx_packets += total_rx_packets;
 	return cleaned;
 }
 
@@ -1051,8 +1049,8 @@ next_desc:
 
 	adapter->total_rx_bytes += total_rx_bytes;
 	adapter->total_rx_packets += total_rx_packets;
-	adapter->net_stats.rx_bytes += total_rx_bytes;
-	adapter->net_stats.rx_packets += total_rx_packets;
+	netdev->stats.rx_bytes += total_rx_bytes;
+	netdev->stats.rx_packets += total_rx_packets;
 	return cleaned;
 }
 
@@ -1199,7 +1197,7 @@ static irqreturn_t e1000_intr(int irq, void *data)
 	struct e1000_hw *hw = &adapter->hw;
 	u32 rctl, icr = er32(ICR);
 
-	if (!icr)
+	if (!icr || test_bit(__E1000_DOWN, &adapter->state))
 		return IRQ_NONE;  /* Not our interrupt */
 
 	/*
@@ -1481,7 +1479,7 @@ static int e1000_request_msix(struct e1000_adapter *adapter)
 	else
 		memcpy(adapter->rx_ring->name, netdev->name, IFNAMSIZ);
 	err = request_irq(adapter->msix_entries[vector].vector,
-			  &e1000_intr_msix_rx, 0, adapter->rx_ring->name,
+			  e1000_intr_msix_rx, 0, adapter->rx_ring->name,
 			  netdev);
 	if (err)
 		goto out;
@@ -1494,7 +1492,7 @@ static int e1000_request_msix(struct e1000_adapter *adapter)
 	else
 		memcpy(adapter->tx_ring->name, netdev->name, IFNAMSIZ);
 	err = request_irq(adapter->msix_entries[vector].vector,
-			  &e1000_intr_msix_tx, 0, adapter->tx_ring->name,
+			  e1000_intr_msix_tx, 0, adapter->tx_ring->name,
 			  netdev);
 	if (err)
 		goto out;
@@ -1503,7 +1501,7 @@ static int e1000_request_msix(struct e1000_adapter *adapter)
 	vector++;
 
 	err = request_irq(adapter->msix_entries[vector].vector,
-			  &e1000_msix_other, 0, netdev->name, netdev);
+			  e1000_msix_other, 0, netdev->name, netdev);
 	if (err)
 		goto out;
 
@@ -1534,7 +1532,7 @@ static int e1000_request_irq(struct e1000_adapter *adapter)
 		e1000e_set_interrupt_capability(adapter);
 	}
 	if (adapter->flags & FLAG_MSI_ENABLED) {
-		err = request_irq(adapter->pdev->irq, &e1000_intr_msi, 0,
+		err = request_irq(adapter->pdev->irq, e1000_intr_msi, 0,
 				  netdev->name, netdev);
 		if (!err)
 			return err;
@@ -1544,7 +1542,7 @@ static int e1000_request_irq(struct e1000_adapter *adapter)
 		adapter->int_mode = E1000E_INT_MODE_LEGACY;
 	}
 
-	err = request_irq(adapter->pdev->irq, &e1000_intr, IRQF_SHARED,
+	err = request_irq(adapter->pdev->irq, e1000_intr, IRQF_SHARED,
 			  netdev->name, netdev);
 	if (err)
 		e_err("Unable to allocate interrupt, Error: %d\n", err);
@@ -2040,11 +2038,14 @@ static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
 	     E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
 	    (vid == adapter->mng_vlan_id))
 		return;
+
 	/* add VID to filter table */
-	index = (vid >> 5) & 0x7F;
-	vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index);
-	vfta |= (1 << (vid & 0x1F));
-	e1000e_write_vfta(hw, index, vfta);
+	if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
+		index = (vid >> 5) & 0x7F;
+		vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index);
+		vfta |= (1 << (vid & 0x1F));
+		hw->mac.ops.write_vfta(hw, index, vfta);
+	}
 }
 
 static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
@@ -2069,10 +2070,12 @@ static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
 	}
 
 	/* remove VID from filter table */
-	index = (vid >> 5) & 0x7F;
-	vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index);
-	vfta &= ~(1 << (vid & 0x1F));
-	e1000e_write_vfta(hw, index, vfta);
+	if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
+		index = (vid >> 5) & 0x7F;
+		vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index);
+		vfta &= ~(1 << (vid & 0x1F));
+		hw->mac.ops.write_vfta(hw, index, vfta);
+	}
 }
 
 static void e1000_update_mng_vlan(struct e1000_adapter *adapter)
@@ -2464,8 +2467,6 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
 		ew32(ITR, 1000000000 / (adapter->itr * 256));
 
 	ctrl_ext = er32(CTRL_EXT);
-	/* Reset delay timers after every interrupt */
-	ctrl_ext |= E1000_CTRL_EXT_INT_TIMER_CLR;
 	/* Auto-Mask interrupts upon ICR access */
 	ctrl_ext |= E1000_CTRL_EXT_IAME;
 	ew32(IAM, 0xffffffff);
@@ -2507,21 +2508,23 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
 	 * packet size is equal or larger than the specified value (in 8 byte
 	 * units), e.g. using jumbo frames when setting to E1000_ERT_2048
 	 */
-	if ((adapter->flags & FLAG_HAS_ERT) &&
-	    (adapter->netdev->mtu > ETH_DATA_LEN)) {
-		u32 rxdctl = er32(RXDCTL(0));
-		ew32(RXDCTL(0), rxdctl | 0x3);
-		ew32(ERT, E1000_ERT_2048 | (1 << 13));
-		/*
-		 * With jumbo frames and early-receive enabled, excessive
-		 * C4->C2 latencies result in dropped transactions.
-		 */
-		pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY,
-					  e1000e_driver_name, 55);
-	} else {
-		pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY,
-					  e1000e_driver_name,
-					  PM_QOS_DEFAULT_VALUE);
+	if (adapter->flags & FLAG_HAS_ERT) {
+		if (adapter->netdev->mtu > ETH_DATA_LEN) {
+			u32 rxdctl = er32(RXDCTL(0));
+			ew32(RXDCTL(0), rxdctl | 0x3);
+			ew32(ERT, E1000_ERT_2048 | (1 << 13));
+			/*
+			 * With jumbo frames and early-receive enabled,
+			 * excessive C-state transition latencies result in
+			 * dropped transactions.
+			 */
+			pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY,
+						  adapter->netdev->name, 55);
+		} else {
+			pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY,
+						  adapter->netdev->name,
+						  PM_QOS_DEFAULT_VALUE);
+		}
 	}
 
 	/* Enable Receives */
@@ -2645,18 +2648,8 @@ static void e1000_configure(struct e1000_adapter *adapter)
  **/
 void e1000e_power_up_phy(struct e1000_adapter *adapter)
 {
-	u16 mii_reg = 0;
-
-	/* Just clear the power down bit to wake the phy back up */
-	if (adapter->hw.phy.media_type == e1000_media_type_copper) {
-		/*
-		 * According to the manual, the phy will retain its
-		 * settings across a power-down/up cycle
-		 */
-		e1e_rphy(&adapter->hw, PHY_CONTROL, &mii_reg);
-		mii_reg &= ~MII_CR_POWER_DOWN;
-		e1e_wphy(&adapter->hw, PHY_CONTROL, mii_reg);
-	}
+	if (adapter->hw.phy.ops.power_up)
+		adapter->hw.phy.ops.power_up(&adapter->hw);
 
 	adapter->hw.mac.ops.setup_link(&adapter->hw);
 }
@@ -2664,35 +2657,17 @@ void e1000e_power_up_phy(struct e1000_adapter *adapter)
 /**
  * e1000_power_down_phy - Power down the PHY
  *
- * Power down the PHY so no link is implied when interface is down
- * The PHY cannot be powered down is management or WoL is active
+ * Power down the PHY so no link is implied when interface is down.
+ * The PHY cannot be powered down if management or WoL is active.
  */
 static void e1000_power_down_phy(struct e1000_adapter *adapter)
 {
-	struct e1000_hw *hw = &adapter->hw;
-	u16 mii_reg;
-
 	/* WoL is enabled */
 	if (adapter->wol)
 		return;
 
-	/* non-copper PHY? */
-	if (adapter->hw.phy.media_type != e1000_media_type_copper)
-		return;
-
-	/* reset is blocked because of a SoL/IDER session */
-	if (e1000e_check_mng_mode(hw) || e1000_check_reset_block(hw))
-		return;
-
-	/* manageability (AMT) is enabled */
-	if (er32(MANC) & E1000_MANC_SMBUS_EN)
-		return;
-
-	/* power down the PHY */
-	e1e_rphy(hw, PHY_CONTROL, &mii_reg);
-	mii_reg |= MII_CR_POWER_DOWN;
-	e1e_wphy(hw, PHY_CONTROL, mii_reg);
-	mdelay(1);
+	if (adapter->hw.phy.ops.power_down)
+		adapter->hw.phy.ops.power_down(&adapter->hw);
 }
 
 /**
@@ -2856,6 +2831,12 @@ int e1000e_up(struct e1000_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
 
+	/* DMA latency requirement to workaround early-receive/jumbo issue */
+	if (adapter->flags & FLAG_HAS_ERT)
+		pm_qos_add_requirement(PM_QOS_CPU_DMA_LATENCY,
+		                       adapter->netdev->name,
+				       PM_QOS_DEFAULT_VALUE);
+
 	/* hardware has been reset, we need to reload some things */
 	e1000_configure(adapter);
 
@@ -2916,6 +2897,10 @@ void e1000e_down(struct e1000_adapter *adapter)
 	e1000_clean_tx_ring(adapter);
 	e1000_clean_rx_ring(adapter);
 
+	if (adapter->flags & FLAG_HAS_ERT)
+		pm_qos_remove_requirement(PM_QOS_CPU_DMA_LATENCY,
+		                          adapter->netdev->name);
+
 	/*
 	 * TODO: for power management, we could drop the link and
 	 * pci_disable_device here.
@@ -2973,7 +2958,7 @@ static irqreturn_t e1000_intr_msi_test(int irq, void *data)
 	struct e1000_hw *hw = &adapter->hw;
 	u32 icr = er32(ICR);
 
-	e_dbg("%s: icr is %08X\n", netdev->name, icr);
+	e_dbg("icr is %08X\n", icr);
 	if (icr & E1000_ICR_RXSEQ) {
 		adapter->flags &= ~FLAG_MSI_TEST_FAILED;
 		wmb();
@@ -3010,7 +2995,7 @@ static int e1000_test_msi_interrupt(struct e1000_adapter *adapter)
 	if (err)
 		goto msi_test_failed;
 
-	err = request_irq(adapter->pdev->irq, &e1000_intr_msi_test, 0,
+	err = request_irq(adapter->pdev->irq, e1000_intr_msi_test, 0,
 			  netdev->name, netdev);
 	if (err) {
 		pci_disable_msi(adapter->pdev);
@@ -3043,7 +3028,7 @@ static int e1000_test_msi_interrupt(struct e1000_adapter *adapter)
 		goto msi_test_failed;
 
 	/* okay so the test worked, restore settings */
-	e_dbg("%s: MSI interrupt test succeeded!\n", netdev->name);
+	e_dbg("MSI interrupt test succeeded!\n");
 msi_test_failed:
 	e1000e_set_interrupt_capability(adapter);
 	e1000_request_irq(adapter);
@@ -3304,6 +3289,7 @@ static void e1000_update_phy_info(unsigned long data)
  **/
 void e1000e_update_stats(struct e1000_adapter *adapter)
 {
+	struct net_device *netdev = adapter->netdev;
 	struct e1000_hw *hw = &adapter->hw;
 	struct pci_dev *pdev = adapter->pdev;
 	u16 phy_data;
@@ -3398,8 +3384,8 @@ void e1000e_update_stats(struct e1000_adapter *adapter)
 	adapter->stats.tsctfc += er32(TSCTFC);
 
 	/* Fill out the OS statistics structure */
-	adapter->net_stats.multicast = adapter->stats.mprc;
-	adapter->net_stats.collisions = adapter->stats.colc;
+	netdev->stats.multicast = adapter->stats.mprc;
+	netdev->stats.collisions = adapter->stats.colc;
 
 	/* Rx Errors */
 
@@ -3407,22 +3393,22 @@ void e1000e_update_stats(struct e1000_adapter *adapter)
 	 * RLEC on some newer hardware can be incorrect so build
 	 * our own version based on RUC and ROC
 	 */
-	adapter->net_stats.rx_errors = adapter->stats.rxerrc +
+	netdev->stats.rx_errors = adapter->stats.rxerrc +
 		adapter->stats.crcerrs + adapter->stats.algnerrc +
 		adapter->stats.ruc + adapter->stats.roc +
 		adapter->stats.cexterr;
-	adapter->net_stats.rx_length_errors = adapter->stats.ruc +
+	netdev->stats.rx_length_errors = adapter->stats.ruc +
 					      adapter->stats.roc;
-	adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs;
-	adapter->net_stats.rx_frame_errors = adapter->stats.algnerrc;
-	adapter->net_stats.rx_missed_errors = adapter->stats.mpc;
+	netdev->stats.rx_crc_errors = adapter->stats.crcerrs;
+	netdev->stats.rx_frame_errors = adapter->stats.algnerrc;
+	netdev->stats.rx_missed_errors = adapter->stats.mpc;
 
 	/* Tx Errors */
-	adapter->net_stats.tx_errors = adapter->stats.ecol +
+	netdev->stats.tx_errors = adapter->stats.ecol +
 				       adapter->stats.latecol;
-	adapter->net_stats.tx_aborted_errors = adapter->stats.ecol;
-	adapter->net_stats.tx_window_errors = adapter->stats.latecol;
-	adapter->net_stats.tx_carrier_errors = adapter->stats.tncrs;
+	netdev->stats.tx_aborted_errors = adapter->stats.ecol;
+	netdev->stats.tx_window_errors = adapter->stats.latecol;
+	netdev->stats.tx_carrier_errors = adapter->stats.tncrs;
 
 	/* Tx Dropped needs to be maintained elsewhere */
 
@@ -3776,68 +3762,64 @@ static int e1000_tso(struct e1000_adapter *adapter,
 	u8 ipcss, ipcso, tucss, tucso, hdr_len;
 	int err;
 
-	if (skb_is_gso(skb)) {
-		if (skb_header_cloned(skb)) {
-			err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
-			if (err)
-				return err;
-		}
+	if (!skb_is_gso(skb))
+		return 0;
 
-		hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
-		mss = skb_shinfo(skb)->gso_size;
-		if (skb->protocol == htons(ETH_P_IP)) {
-			struct iphdr *iph = ip_hdr(skb);
-			iph->tot_len = 0;
-			iph->check = 0;
-			tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
-								 iph->daddr, 0,
-								 IPPROTO_TCP,
-								 0);
-			cmd_length = E1000_TXD_CMD_IP;
-			ipcse = skb_transport_offset(skb) - 1;
-		} else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) {
-			ipv6_hdr(skb)->payload_len = 0;
-			tcp_hdr(skb)->check =
-				~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
-						 &ipv6_hdr(skb)->daddr,
-						 0, IPPROTO_TCP, 0);
-			ipcse = 0;
-		}
-		ipcss = skb_network_offset(skb);
-		ipcso = (void *)&(ip_hdr(skb)->check) - (void *)skb->data;
-		tucss = skb_transport_offset(skb);
-		tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data;
-		tucse = 0;
+	if (skb_header_cloned(skb)) {
+		err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
+		if (err)
+			return err;
+	}
 
-		cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
-			       E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
+	hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
+	mss = skb_shinfo(skb)->gso_size;
+	if (skb->protocol == htons(ETH_P_IP)) {
+		struct iphdr *iph = ip_hdr(skb);
+		iph->tot_len = 0;
+		iph->check = 0;
+		tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr,
+		                                         0, IPPROTO_TCP, 0);
+		cmd_length = E1000_TXD_CMD_IP;
+		ipcse = skb_transport_offset(skb) - 1;
+	} else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) {
+		ipv6_hdr(skb)->payload_len = 0;
+		tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
+		                                       &ipv6_hdr(skb)->daddr,
+		                                       0, IPPROTO_TCP, 0);
+		ipcse = 0;
+	}
+	ipcss = skb_network_offset(skb);
+	ipcso = (void *)&(ip_hdr(skb)->check) - (void *)skb->data;
+	tucss = skb_transport_offset(skb);
+	tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data;
+	tucse = 0;
 
-		i = tx_ring->next_to_use;
-		context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
-		buffer_info = &tx_ring->buffer_info[i];
+	cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
+	               E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
 
-		context_desc->lower_setup.ip_fields.ipcss  = ipcss;
-		context_desc->lower_setup.ip_fields.ipcso  = ipcso;
-		context_desc->lower_setup.ip_fields.ipcse  = cpu_to_le16(ipcse);
-		context_desc->upper_setup.tcp_fields.tucss = tucss;
-		context_desc->upper_setup.tcp_fields.tucso = tucso;
-		context_desc->upper_setup.tcp_fields.tucse = cpu_to_le16(tucse);
-		context_desc->tcp_seg_setup.fields.mss     = cpu_to_le16(mss);
-		context_desc->tcp_seg_setup.fields.hdr_len = hdr_len;
-		context_desc->cmd_and_length = cpu_to_le32(cmd_length);
+	i = tx_ring->next_to_use;
+	context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
+	buffer_info = &tx_ring->buffer_info[i];
 
-		buffer_info->time_stamp = jiffies;
-		buffer_info->next_to_watch = i;
+	context_desc->lower_setup.ip_fields.ipcss  = ipcss;
+	context_desc->lower_setup.ip_fields.ipcso  = ipcso;
+	context_desc->lower_setup.ip_fields.ipcse  = cpu_to_le16(ipcse);
+	context_desc->upper_setup.tcp_fields.tucss = tucss;
+	context_desc->upper_setup.tcp_fields.tucso = tucso;
+	context_desc->upper_setup.tcp_fields.tucse = cpu_to_le16(tucse);
+	context_desc->tcp_seg_setup.fields.mss     = cpu_to_le16(mss);
+	context_desc->tcp_seg_setup.fields.hdr_len = hdr_len;
+	context_desc->cmd_and_length = cpu_to_le32(cmd_length);
 
-		i++;
-		if (i == tx_ring->count)
-			i = 0;
-		tx_ring->next_to_use = i;
+	buffer_info->time_stamp = jiffies;
+	buffer_info->next_to_watch = i;
 
-		return 1;
-	}
+	i++;
+	if (i == tx_ring->count)
+		i = 0;
+	tx_ring->next_to_use = i;
 
-	return 0;
+	return 1;
 }
 
 static bool e1000_tx_csum(struct e1000_adapter *adapter, struct sk_buff *skb)
@@ -3909,23 +3891,14 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
 			unsigned int mss)
 {
 	struct e1000_ring *tx_ring = adapter->tx_ring;
+	struct pci_dev *pdev = adapter->pdev;
 	struct e1000_buffer *buffer_info;
 	unsigned int len = skb_headlen(skb);
-	unsigned int offset, size, count = 0, i;
+	unsigned int offset = 0, size, count = 0, i;
 	unsigned int f;
-	dma_addr_t *map;
 
 	i = tx_ring->next_to_use;
 
-	if (skb_dma_map(&adapter->pdev->dev, skb, DMA_TO_DEVICE)) {
-		dev_err(&adapter->pdev->dev, "TX DMA map failed\n");
-		adapter->tx_dma_failed++;
-		return 0;
-	}
-
-	map = skb_shinfo(skb)->dma_maps;
-	offset = 0;
-
 	while (len) {
 		buffer_info = &tx_ring->buffer_info[i];
 		size = min(len, max_per_txd);
@@ -3933,11 +3906,15 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
 		buffer_info->length = size;
 		buffer_info->time_stamp = jiffies;
 		buffer_info->next_to_watch = i;
-		buffer_info->dma = skb_shinfo(skb)->dma_head + offset;
-		count++;
+		buffer_info->dma = pci_map_single(pdev,	skb->data + offset,
+						  size,	PCI_DMA_TODEVICE);
+		buffer_info->mapped_as_page = false;
+		if (pci_dma_mapping_error(pdev, buffer_info->dma))
+			goto dma_error;
 
 		len -= size;
 		offset += size;
+		count++;
 
 		if (len) {
 			i++;
@@ -3951,7 +3928,7 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
 
 		frag = &skb_shinfo(skb)->frags[f];
 		len = frag->size;
-		offset = 0;
+		offset = frag->page_offset;
 
 		while (len) {
 			i++;
@@ -3964,7 +3941,12 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
 			buffer_info->length = size;
 			buffer_info->time_stamp = jiffies;
 			buffer_info->next_to_watch = i;
-			buffer_info->dma = map[f] + offset;
+			buffer_info->dma = pci_map_page(pdev, frag->page,
+							offset, size,
+							PCI_DMA_TODEVICE);
+			buffer_info->mapped_as_page = true;
+			if (pci_dma_mapping_error(pdev, buffer_info->dma))
+				goto dma_error;
 
 			len -= size;
 			offset += size;
@@ -3976,6 +3958,22 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
 	tx_ring->buffer_info[first].next_to_watch = i;
 
 	return count;
+
+dma_error:
+	dev_err(&pdev->dev, "TX DMA map failed\n");
+	buffer_info->dma = 0;
+	count--;
+
+	while (count >= 0) {
+		count--;
+		i--;
+		if (i < 0)
+			i += tx_ring->count;
+		buffer_info = &tx_ring->buffer_info[i];
+		e1000_put_txbuf(adapter, buffer_info);;
+	}
+
+	return 0;
 }
 
 static void e1000_tx_queue(struct e1000_adapter *adapter,
@@ -4048,8 +4046,8 @@ static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter,
 	u16 length, offset;
 
 	if (vlan_tx_tag_present(skb)) {
-		if (!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id)
-		    && (adapter->hw.mng_cookie.status &
+		if (!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) &&
+		    (adapter->hw.mng_cookie.status &
 			E1000_MNG_DHCP_COOKIE_STATUS_VLAN)))
 			return 0;
 	}
@@ -4271,10 +4269,8 @@ static void e1000_reset_task(struct work_struct *work)
  **/
 static struct net_device_stats *e1000_get_stats(struct net_device *netdev)
 {
-	struct e1000_adapter *adapter = netdev_priv(netdev);
-
 	/* only return the current stats */
-	return &adapter->net_stats;
+	return &netdev->stats;
 }
 
 /**
@@ -4362,6 +4358,8 @@ static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
 		data->phy_id = adapter->hw.phy.addr;
 		break;
 	case SIOCGMIIREG:
+		e1000_phy_read_status(adapter);
+
 		switch (data->reg_num & 0x1F) {
 		case MII_BMCR:
 			data->val_out = adapter->phy_regs.bmcr;
@@ -4469,7 +4467,7 @@ static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc)
 	e1e_wphy(&adapter->hw, BM_WUC, E1000_WUC_PME_EN);
 
 	/* activate PHY wakeup */
-	retval = hw->phy.ops.acquire_phy(hw);
+	retval = hw->phy.ops.acquire(hw);
 	if (retval) {
 		e_err("Could not acquire PHY\n");
 		return retval;
@@ -4486,7 +4484,7 @@ static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc)
 	if (retval)
 		e_err("Could not set PHY Host Wakeup bit\n");
 out:
-	hw->phy.ops.release_phy(hw);
+	hw->phy.ops.release(hw);
 
 	return retval;
 }
@@ -5160,6 +5158,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	INIT_WORK(&adapter->watchdog_task, e1000_watchdog_task);
 	INIT_WORK(&adapter->downshift_task, e1000e_downshift_workaround);
 	INIT_WORK(&adapter->update_phy_task, e1000e_update_phy_task);
+	INIT_WORK(&adapter->print_hang_task, e1000_print_hw_hang);
 
 	/* Initialize link parameters. User can change them with ethtool */
 	adapter->hw.mac.autoneg = 1;
@@ -5283,19 +5282,24 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
 	del_timer_sync(&adapter->watchdog_timer);
 	del_timer_sync(&adapter->phy_info_timer);
 
+	cancel_work_sync(&adapter->reset_task);
+	cancel_work_sync(&adapter->watchdog_task);
+	cancel_work_sync(&adapter->downshift_task);
+	cancel_work_sync(&adapter->update_phy_task);
+	cancel_work_sync(&adapter->print_hang_task);
 	flush_scheduled_work();
 
+	if (!(netdev->flags & IFF_UP))
+		e1000_power_down_phy(adapter);
+
+	unregister_netdev(netdev);
+
 	/*
 	 * Release control of h/w to f/w.  If f/w is AMT enabled, this
 	 * would have already happened in close and is redundant.
 	 */
 	e1000_release_hw_control(adapter);
 
-	unregister_netdev(netdev);
-
-	if (!e1000_check_reset_block(&adapter->hw))
-		e1000_phy_hw_reset(&adapter->hw);
-
 	e1000e_reset_interrupt_capability(adapter);
 	kfree(adapter->tx_ring);
 	kfree(adapter->rx_ring);
@@ -5361,6 +5365,7 @@ static struct pci_device_id e1000_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_C), board_ich8lan },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M), board_ich8lan },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M_AMT), board_ich8lan },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_82567V_3), board_ich8lan },
 
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE), board_ich9lan },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_G), board_ich9lan },
@@ -5414,12 +5419,10 @@ static int __init e1000_init_module(void)
 	int ret;
 	printk(KERN_INFO "%s: Intel(R) PRO/1000 Network Driver - %s\n",
 	       e1000e_driver_name, e1000e_driver_version);
-	printk(KERN_INFO "%s: Copyright (c) 1999-2008 Intel Corporation.\n",
+	printk(KERN_INFO "%s: Copyright (c) 1999 - 2009 Intel Corporation.\n",
 	       e1000e_driver_name);
 	ret = pci_register_driver(&e1000_driver);
-	pm_qos_add_requirement(PM_QOS_CPU_DMA_LATENCY, e1000e_driver_name,
-			       PM_QOS_DEFAULT_VALUE);
-				
+
 	return ret;
 }
 module_init(e1000_init_module);
@@ -5433,7 +5436,6 @@ module_init(e1000_init_module);
 static void __exit e1000_exit_module(void)
 {
 	pci_unregister_driver(&e1000_driver);
-	pm_qos_remove_requirement(PM_QOS_CPU_DMA_LATENCY, e1000e_driver_name);
 }
 module_exit(e1000_exit_module);
 
diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c
index 1342e0b1815..2e399778cae 100644
--- a/drivers/net/e1000e/param.c
+++ b/drivers/net/e1000e/param.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2008 Intel Corporation.
+  Copyright(c) 1999 - 2009 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index 85f955f7041..55a2c0acfee 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2008 Intel Corporation.
+  Copyright(c) 1999 - 2009 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -44,6 +44,8 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
 /* Cable length tables */
 static const u16 e1000_m88_cable_length_table[] =
 	{ 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED };
+#define M88E1000_CABLE_LENGTH_TABLE_SIZE \
+		ARRAY_SIZE(e1000_m88_cable_length_table)
 
 static const u16 e1000_igp_2_cable_length_table[] =
 	{ 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, 0, 0, 0, 3,
@@ -130,7 +132,7 @@ s32 e1000e_get_phy_id(struct e1000_hw *hw)
 	u16 phy_id;
 	u16 retry_count = 0;
 
-	if (!(phy->ops.read_phy_reg))
+	if (!(phy->ops.read_reg))
 		goto out;
 
 	while (retry_count < 2) {
@@ -151,29 +153,29 @@ s32 e1000e_get_phy_id(struct e1000_hw *hw)
 			goto out;
 
 		/*
-		 * If the PHY ID is still unknown, we may have an 82577i
-		 * without link.  We will try again after setting Slow
-		 * MDIC mode. No harm in trying again in this case since
-		 * the PHY ID is unknown at this point anyway
+		 * If the PHY ID is still unknown, we may have an 82577
+		 * without link.  We will try again after setting Slow MDIC
+		 * mode. No harm in trying again in this case since the PHY
+		 * ID is unknown at this point anyway.
 		 */
-		ret_val = phy->ops.acquire_phy(hw);
+		ret_val = phy->ops.acquire(hw);
 		if (ret_val)
 			goto out;
 		ret_val = e1000_set_mdio_slow_mode_hv(hw, true);
 		if (ret_val)
 			goto out;
-		phy->ops.release_phy(hw);
+		phy->ops.release(hw);
 
 		retry_count++;
 	}
 out:
 	/* Revert to MDIO fast mode, if applicable */
 	if (retry_count) {
-		ret_val = phy->ops.acquire_phy(hw);
+		ret_val = phy->ops.acquire(hw);
 		if (ret_val)
 			return ret_val;
 		ret_val = e1000_set_mdio_slow_mode_hv(hw, false);
-		phy->ops.release_phy(hw);
+		phy->ops.release(hw);
 	}
 
 	return ret_val;
@@ -211,7 +213,7 @@ s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
 	u32 i, mdic = 0;
 
 	if (offset > MAX_PHY_REG_ADDRESS) {
-		hw_dbg(hw, "PHY Address %d is out of range\n", offset);
+		e_dbg("PHY Address %d is out of range\n", offset);
 		return -E1000_ERR_PARAM;
 	}
 
@@ -238,11 +240,11 @@ s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
 			break;
 	}
 	if (!(mdic & E1000_MDIC_READY)) {
-		hw_dbg(hw, "MDI Read did not complete\n");
+		e_dbg("MDI Read did not complete\n");
 		return -E1000_ERR_PHY;
 	}
 	if (mdic & E1000_MDIC_ERROR) {
-		hw_dbg(hw, "MDI Error\n");
+		e_dbg("MDI Error\n");
 		return -E1000_ERR_PHY;
 	}
 	*data = (u16) mdic;
@@ -264,7 +266,7 @@ s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
 	u32 i, mdic = 0;
 
 	if (offset > MAX_PHY_REG_ADDRESS) {
-		hw_dbg(hw, "PHY Address %d is out of range\n", offset);
+		e_dbg("PHY Address %d is out of range\n", offset);
 		return -E1000_ERR_PARAM;
 	}
 
@@ -292,11 +294,11 @@ s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
 			break;
 	}
 	if (!(mdic & E1000_MDIC_READY)) {
-		hw_dbg(hw, "MDI Write did not complete\n");
+		e_dbg("MDI Write did not complete\n");
 		return -E1000_ERR_PHY;
 	}
 	if (mdic & E1000_MDIC_ERROR) {
-		hw_dbg(hw, "MDI Error\n");
+		e_dbg("MDI Error\n");
 		return -E1000_ERR_PHY;
 	}
 
@@ -317,14 +319,14 @@ s32 e1000e_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data)
 {
 	s32 ret_val;
 
-	ret_val = hw->phy.ops.acquire_phy(hw);
+	ret_val = hw->phy.ops.acquire(hw);
 	if (ret_val)
 		return ret_val;
 
 	ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
 					   data);
 
-	hw->phy.ops.release_phy(hw);
+	hw->phy.ops.release(hw);
 
 	return ret_val;
 }
@@ -342,14 +344,14 @@ s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data)
 {
 	s32 ret_val;
 
-	ret_val = hw->phy.ops.acquire_phy(hw);
+	ret_val = hw->phy.ops.acquire(hw);
 	if (ret_val)
 		return ret_val;
 
 	ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
 					    data);
 
-	hw->phy.ops.release_phy(hw);
+	hw->phy.ops.release(hw);
 
 	return ret_val;
 }
@@ -371,10 +373,10 @@ static s32 __e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data,
 	s32 ret_val = 0;
 
 	if (!locked) {
-		if (!(hw->phy.ops.acquire_phy))
+		if (!(hw->phy.ops.acquire))
 			goto out;
 
-		ret_val = hw->phy.ops.acquire_phy(hw);
+		ret_val = hw->phy.ops.acquire(hw);
 		if (ret_val)
 			goto out;
 	}
@@ -392,7 +394,7 @@ static s32 __e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data,
 
 release:
 	if (!locked)
-		hw->phy.ops.release_phy(hw);
+		hw->phy.ops.release(hw);
 out:
 	return ret_val;
 }
@@ -442,10 +444,10 @@ static s32 __e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data,
 	s32 ret_val = 0;
 
 	if (!locked) {
-		if (!(hw->phy.ops.acquire_phy))
+		if (!(hw->phy.ops.acquire))
 			goto out;
 
-		ret_val = hw->phy.ops.acquire_phy(hw);
+		ret_val = hw->phy.ops.acquire(hw);
 		if (ret_val)
 			goto out;
 	}
@@ -463,7 +465,7 @@ static s32 __e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data,
 
 release:
 	if (!locked)
-		hw->phy.ops.release_phy(hw);
+		hw->phy.ops.release(hw);
 
 out:
 	return ret_val;
@@ -515,10 +517,10 @@ static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data,
 	s32 ret_val = 0;
 
 	if (!locked) {
-		if (!(hw->phy.ops.acquire_phy))
+		if (!(hw->phy.ops.acquire))
 			goto out;
 
-		ret_val = hw->phy.ops.acquire_phy(hw);
+		ret_val = hw->phy.ops.acquire(hw);
 		if (ret_val)
 			goto out;
 	}
@@ -533,7 +535,7 @@ static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data,
 	*data = (u16)kmrnctrlsta;
 
 	if (!locked)
-		hw->phy.ops.release_phy(hw);
+		hw->phy.ops.release(hw);
 
 out:
 	return ret_val;
@@ -587,10 +589,10 @@ static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data,
 	s32 ret_val = 0;
 
 	if (!locked) {
-		if (!(hw->phy.ops.acquire_phy))
+		if (!(hw->phy.ops.acquire))
 			goto out;
 
-		ret_val = hw->phy.ops.acquire_phy(hw);
+		ret_val = hw->phy.ops.acquire(hw);
 		if (ret_val)
 			goto out;
 	}
@@ -602,7 +604,7 @@ static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data,
 	udelay(2);
 
 	if (!locked)
-		hw->phy.ops.release_phy(hw);
+		hw->phy.ops.release(hw);
 
 out:
 	return ret_val;
@@ -649,7 +651,7 @@ s32 e1000_copper_link_setup_82577(struct e1000_hw *hw)
 	u16 phy_data;
 
 	/* Enable CRS on TX. This must be set for half-duplex operation. */
-	ret_val = phy->ops.read_phy_reg(hw, I82577_CFG_REG, &phy_data);
+	ret_val = phy->ops.read_reg(hw, I82577_CFG_REG, &phy_data);
 	if (ret_val)
 		goto out;
 
@@ -658,7 +660,7 @@ s32 e1000_copper_link_setup_82577(struct e1000_hw *hw)
 	/* Enable downshift */
 	phy_data |= I82577_CFG_ENABLE_DOWNSHIFT;
 
-	ret_val = phy->ops.write_phy_reg(hw, I82577_CFG_REG, phy_data);
+	ret_val = phy->ops.write_reg(hw, I82577_CFG_REG, phy_data);
 
 out:
 	return ret_val;
@@ -776,12 +778,12 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
 	/* Commit the changes. */
 	ret_val = e1000e_commit_phy(hw);
 	if (ret_val) {
-		hw_dbg(hw, "Error committing the PHY changes\n");
+		e_dbg("Error committing the PHY changes\n");
 		return ret_val;
 	}
 
 	if (phy->type == e1000_phy_82578) {
-		ret_val = phy->ops.read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+		ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
 		                            &phy_data);
 		if (ret_val)
 			return ret_val;
@@ -789,7 +791,7 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
 		/* 82578 PHY - set the downshift count to 1x. */
 		phy_data |= I82578_EPSCR_DOWNSHIFT_ENABLE;
 		phy_data &= ~I82578_EPSCR_DOWNSHIFT_COUNTER_MASK;
-		ret_val = phy->ops.write_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+		ret_val = phy->ops.write_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
 		                             phy_data);
 		if (ret_val)
 			return ret_val;
@@ -813,7 +815,7 @@ s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw)
 
 	ret_val = e1000_phy_hw_reset(hw);
 	if (ret_val) {
-		hw_dbg(hw, "Error resetting the PHY.\n");
+		e_dbg("Error resetting the PHY.\n");
 		return ret_val;
 	}
 
@@ -824,9 +826,9 @@ s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw)
 	msleep(100);
 
 	/* disable lplu d0 during driver init */
-	ret_val = e1000_set_d0_lplu_state(hw, 0);
+	ret_val = e1000_set_d0_lplu_state(hw, false);
 	if (ret_val) {
-		hw_dbg(hw, "Error Disabling LPLU D0\n");
+		e_dbg("Error Disabling LPLU D0\n");
 		return ret_val;
 	}
 	/* Configure mdi-mdix settings */
@@ -962,39 +964,39 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
 				 NWAY_AR_10T_HD_CAPS);
 	mii_1000t_ctrl_reg &= ~(CR_1000T_HD_CAPS | CR_1000T_FD_CAPS);
 
-	hw_dbg(hw, "autoneg_advertised %x\n", phy->autoneg_advertised);
+	e_dbg("autoneg_advertised %x\n", phy->autoneg_advertised);
 
 	/* Do we want to advertise 10 Mb Half Duplex? */
 	if (phy->autoneg_advertised & ADVERTISE_10_HALF) {
-		hw_dbg(hw, "Advertise 10mb Half duplex\n");
+		e_dbg("Advertise 10mb Half duplex\n");
 		mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS;
 	}
 
 	/* Do we want to advertise 10 Mb Full Duplex? */
 	if (phy->autoneg_advertised & ADVERTISE_10_FULL) {
-		hw_dbg(hw, "Advertise 10mb Full duplex\n");
+		e_dbg("Advertise 10mb Full duplex\n");
 		mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS;
 	}
 
 	/* Do we want to advertise 100 Mb Half Duplex? */
 	if (phy->autoneg_advertised & ADVERTISE_100_HALF) {
-		hw_dbg(hw, "Advertise 100mb Half duplex\n");
+		e_dbg("Advertise 100mb Half duplex\n");
 		mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS;
 	}
 
 	/* Do we want to advertise 100 Mb Full Duplex? */
 	if (phy->autoneg_advertised & ADVERTISE_100_FULL) {
-		hw_dbg(hw, "Advertise 100mb Full duplex\n");
+		e_dbg("Advertise 100mb Full duplex\n");
 		mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS;
 	}
 
 	/* We do not allow the Phy to advertise 1000 Mb Half Duplex */
 	if (phy->autoneg_advertised & ADVERTISE_1000_HALF)
-		hw_dbg(hw, "Advertise 1000mb Half duplex request denied!\n");
+		e_dbg("Advertise 1000mb Half duplex request denied!\n");
 
 	/* Do we want to advertise 1000 Mb Full Duplex? */
 	if (phy->autoneg_advertised & ADVERTISE_1000_FULL) {
-		hw_dbg(hw, "Advertise 1000mb Full duplex\n");
+		e_dbg("Advertise 1000mb Full duplex\n");
 		mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS;
 	}
 
@@ -1053,7 +1055,7 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
 		mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
 		break;
 	default:
-		hw_dbg(hw, "Flow control param set incorrectly\n");
+		e_dbg("Flow control param set incorrectly\n");
 		ret_val = -E1000_ERR_CONFIG;
 		return ret_val;
 	}
@@ -1062,7 +1064,7 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
 	if (ret_val)
 		return ret_val;
 
-	hw_dbg(hw, "Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
+	e_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
 
 	if (phy->autoneg_mask & ADVERTISE_1000_FULL) {
 		ret_val = e1e_wphy(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
@@ -1099,13 +1101,13 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
 	if (phy->autoneg_advertised == 0)
 		phy->autoneg_advertised = phy->autoneg_mask;
 
-	hw_dbg(hw, "Reconfiguring auto-neg advertisement params\n");
+	e_dbg("Reconfiguring auto-neg advertisement params\n");
 	ret_val = e1000_phy_setup_autoneg(hw);
 	if (ret_val) {
-		hw_dbg(hw, "Error Setting up Auto-Negotiation\n");
+		e_dbg("Error Setting up Auto-Negotiation\n");
 		return ret_val;
 	}
-	hw_dbg(hw, "Restarting Auto-Neg\n");
+	e_dbg("Restarting Auto-Neg\n");
 
 	/*
 	 * Restart auto-negotiation by setting the Auto Neg Enable bit and
@@ -1127,7 +1129,7 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
 	if (phy->autoneg_wait_to_complete) {
 		ret_val = e1000_wait_autoneg(hw);
 		if (ret_val) {
-			hw_dbg(hw, "Error while waiting for "
+			e_dbg("Error while waiting for "
 				 "autoneg to complete\n");
 			return ret_val;
 		}
@@ -1165,10 +1167,10 @@ s32 e1000e_setup_copper_link(struct e1000_hw *hw)
 		 * PHY will be set to 10H, 10F, 100H or 100F
 		 * depending on user settings.
 		 */
-		hw_dbg(hw, "Forcing Speed and Duplex\n");
+		e_dbg("Forcing Speed and Duplex\n");
 		ret_val = e1000_phy_force_speed_duplex(hw);
 		if (ret_val) {
-			hw_dbg(hw, "Error Forcing Speed and Duplex\n");
+			e_dbg("Error Forcing Speed and Duplex\n");
 			return ret_val;
 		}
 	}
@@ -1185,11 +1187,11 @@ s32 e1000e_setup_copper_link(struct e1000_hw *hw)
 		return ret_val;
 
 	if (link) {
-		hw_dbg(hw, "Valid link established!!!\n");
+		e_dbg("Valid link established!!!\n");
 		e1000e_config_collision_dist(hw);
 		ret_val = e1000e_config_fc_after_link_up(hw);
 	} else {
-		hw_dbg(hw, "Unable to establish link!!!\n");
+		e_dbg("Unable to establish link!!!\n");
 	}
 
 	return ret_val;
@@ -1235,12 +1237,12 @@ s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw)
 	if (ret_val)
 		return ret_val;
 
-	hw_dbg(hw, "IGP PSCR: %X\n", phy_data);
+	e_dbg("IGP PSCR: %X\n", phy_data);
 
 	udelay(1);
 
 	if (phy->autoneg_wait_to_complete) {
-		hw_dbg(hw, "Waiting for forced speed/duplex link on IGP phy.\n");
+		e_dbg("Waiting for forced speed/duplex link on IGP phy.\n");
 
 		ret_val = e1000e_phy_has_link_generic(hw,
 						     PHY_FORCE_LIMIT,
@@ -1250,7 +1252,7 @@ s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw)
 			return ret_val;
 
 		if (!link)
-			hw_dbg(hw, "Link taking longer than expected.\n");
+			e_dbg("Link taking longer than expected.\n");
 
 		/* Try once more */
 		ret_val = e1000e_phy_has_link_generic(hw,
@@ -1294,7 +1296,7 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
 	if (ret_val)
 		return ret_val;
 
-	hw_dbg(hw, "M88E1000 PSCR: %X\n", phy_data);
+	e_dbg("M88E1000 PSCR: %X\n", phy_data);
 
 	ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data);
 	if (ret_val)
@@ -1312,7 +1314,7 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
 		return ret_val;
 
 	if (phy->autoneg_wait_to_complete) {
-		hw_dbg(hw, "Waiting for forced speed/duplex link on M88 phy.\n");
+		e_dbg("Waiting for forced speed/duplex link on M88 phy.\n");
 
 		ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
 						     100000, &link);
@@ -1320,17 +1322,22 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
 			return ret_val;
 
 		if (!link) {
-			/*
-			 * We didn't get link.
-			 * Reset the DSP and cross our fingers.
-			 */
-			ret_val = e1e_wphy(hw, M88E1000_PHY_PAGE_SELECT,
-					   0x001d);
-			if (ret_val)
-				return ret_val;
-			ret_val = e1000e_phy_reset_dsp(hw);
-			if (ret_val)
-				return ret_val;
+			if (hw->phy.type != e1000_phy_m88) {
+				e_dbg("Link taking longer than expected.\n");
+			} else {
+				/*
+				 * We didn't get link.
+				 * Reset the DSP and cross our fingers.
+				 */
+				ret_val = e1e_wphy(hw,
+						M88E1000_PHY_PAGE_SELECT,
+						0x001d);
+				if (ret_val)
+					return ret_val;
+				ret_val = e1000e_phy_reset_dsp(hw);
+				if (ret_val)
+					return ret_val;
+			}
 		}
 
 		/* Try once more */
@@ -1340,6 +1347,9 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
 			return ret_val;
 	}
 
+	if (hw->phy.type != e1000_phy_m88)
+		return 0;
+
 	ret_val = e1e_rphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
 	if (ret_val)
 		return ret_val;
@@ -1369,6 +1379,73 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
 }
 
 /**
+ *  e1000_phy_force_speed_duplex_ife - Force PHY speed & duplex
+ *  @hw: pointer to the HW structure
+ *
+ *  Forces the speed and duplex settings of the PHY.
+ *  This is a function pointer entry point only called by
+ *  PHY setup routines.
+ **/
+s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+	bool link;
+
+	ret_val = e1e_rphy(hw, PHY_CONTROL, &data);
+	if (ret_val)
+		goto out;
+
+	e1000e_phy_force_speed_duplex_setup(hw, &data);
+
+	ret_val = e1e_wphy(hw, PHY_CONTROL, data);
+	if (ret_val)
+		goto out;
+
+	/* Disable MDI-X support for 10/100 */
+	ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &data);
+	if (ret_val)
+		goto out;
+
+	data &= ~IFE_PMC_AUTO_MDIX;
+	data &= ~IFE_PMC_FORCE_MDIX;
+
+	ret_val = e1e_wphy(hw, IFE_PHY_MDIX_CONTROL, data);
+	if (ret_val)
+		goto out;
+
+	e_dbg("IFE PMC: %X\n", data);
+
+	udelay(1);
+
+	if (phy->autoneg_wait_to_complete) {
+		e_dbg("Waiting for forced speed/duplex link on IFE phy.\n");
+
+		ret_val = e1000e_phy_has_link_generic(hw,
+		                                     PHY_FORCE_LIMIT,
+		                                     100000,
+		                                     &link);
+		if (ret_val)
+			goto out;
+
+		if (!link)
+			e_dbg("Link taking longer than expected.\n");
+
+		/* Try once more */
+		ret_val = e1000e_phy_has_link_generic(hw,
+		                                     PHY_FORCE_LIMIT,
+		                                     100000,
+		                                     &link);
+		if (ret_val)
+			goto out;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
  *  e1000e_phy_force_speed_duplex_setup - Configure forced PHY speed/duplex
  *  @hw: pointer to the HW structure
  *  @phy_ctrl: pointer to current value of PHY_CONTROL
@@ -1403,11 +1480,11 @@ void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl)
 	if (mac->forced_speed_duplex & E1000_ALL_HALF_DUPLEX) {
 		ctrl &= ~E1000_CTRL_FD;
 		*phy_ctrl &= ~MII_CR_FULL_DUPLEX;
-		hw_dbg(hw, "Half Duplex\n");
+		e_dbg("Half Duplex\n");
 	} else {
 		ctrl |= E1000_CTRL_FD;
 		*phy_ctrl |= MII_CR_FULL_DUPLEX;
-		hw_dbg(hw, "Full Duplex\n");
+		e_dbg("Full Duplex\n");
 	}
 
 	/* Forcing 10mb or 100mb? */
@@ -1415,12 +1492,12 @@ void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl)
 		ctrl |= E1000_CTRL_SPD_100;
 		*phy_ctrl |= MII_CR_SPEED_100;
 		*phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10);
-		hw_dbg(hw, "Forcing 100mb\n");
+		e_dbg("Forcing 100mb\n");
 	} else {
 		ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
 		*phy_ctrl |= MII_CR_SPEED_10;
 		*phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100);
-		hw_dbg(hw, "Forcing 10mb\n");
+		e_dbg("Forcing 10mb\n");
 	}
 
 	e1000e_config_collision_dist(hw);
@@ -1523,8 +1600,8 @@ s32 e1000e_check_downshift(struct e1000_hw *hw)
 	switch (phy->type) {
 	case e1000_phy_m88:
 	case e1000_phy_gg82563:
+	case e1000_phy_bm:
 	case e1000_phy_82578:
-	case e1000_phy_82577:
 		offset	= M88E1000_PHY_SPEC_STATUS;
 		mask	= M88E1000_PSSR_DOWNSHIFT;
 		break;
@@ -1535,7 +1612,7 @@ s32 e1000e_check_downshift(struct e1000_hw *hw)
 		break;
 	default:
 		/* speed downshift not supported */
-		phy->speed_downgraded = 0;
+		phy->speed_downgraded = false;
 		return 0;
 	}
 
@@ -1555,7 +1632,7 @@ s32 e1000e_check_downshift(struct e1000_hw *hw)
  *
  *  Polarity is determined based on the PHY specific status register.
  **/
-static s32 e1000_check_polarity_m88(struct e1000_hw *hw)
+s32 e1000_check_polarity_m88(struct e1000_hw *hw)
 {
 	struct e1000_phy_info *phy = &hw->phy;
 	s32 ret_val;
@@ -1580,7 +1657,7 @@ static s32 e1000_check_polarity_m88(struct e1000_hw *hw)
  *  Polarity is determined based on the PHY port status register, and the
  *  current speed (since there is no polarity at 100Mbps).
  **/
-static s32 e1000_check_polarity_igp(struct e1000_hw *hw)
+s32 e1000_check_polarity_igp(struct e1000_hw *hw)
 {
 	struct e1000_phy_info *phy = &hw->phy;
 	s32 ret_val;
@@ -1618,6 +1695,39 @@ static s32 e1000_check_polarity_igp(struct e1000_hw *hw)
 }
 
 /**
+ *  e1000_check_polarity_ife - Check cable polarity for IFE PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  Polarity is determined on the polarity reversal feature being enabled.
+ **/
+s32 e1000_check_polarity_ife(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data, offset, mask;
+
+	/*
+	 * Polarity is determined based on the reversal feature being enabled.
+	 */
+	if (phy->polarity_correction) {
+		offset = IFE_PHY_EXTENDED_STATUS_CONTROL;
+		mask = IFE_PESC_POLARITY_REVERSED;
+	} else {
+		offset = IFE_PHY_SPECIAL_CONTROL;
+		mask = IFE_PSC_FORCE_POLARITY;
+	}
+
+	ret_val = e1e_rphy(hw, offset, &phy_data);
+
+	if (!ret_val)
+		phy->cable_polarity = (phy_data & mask)
+		                       ? e1000_rev_polarity_reversed
+		                       : e1000_rev_polarity_normal;
+
+	return ret_val;
+}
+
+/**
  *  e1000_wait_autoneg - Wait for auto-neg completion
  *  @hw: pointer to the HW structure
  *
@@ -1717,15 +1827,21 @@ s32 e1000e_get_cable_length_m88(struct e1000_hw *hw)
 
 	ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
 	if (ret_val)
-		return ret_val;
+		goto out;
 
 	index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
-		M88E1000_PSSR_CABLE_LENGTH_SHIFT;
+	        M88E1000_PSSR_CABLE_LENGTH_SHIFT;
+	if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) {
+		ret_val = -E1000_ERR_PHY;
+		goto out;
+	}
+
 	phy->min_cable_length = e1000_m88_cable_length_table[index];
-	phy->max_cable_length = e1000_m88_cable_length_table[index+1];
+	phy->max_cable_length = e1000_m88_cable_length_table[index + 1];
 
 	phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
 
+out:
 	return ret_val;
 }
 
@@ -1736,7 +1852,7 @@ s32 e1000e_get_cable_length_m88(struct e1000_hw *hw)
  *  The automatic gain control (agc) normalizes the amplitude of the
  *  received signal, adjusting for the attenuation produced by the
  *  cable.  By reading the AGC registers, which represent the
- *  combination of course and fine gain value, the value can be put
+ *  combination of coarse and fine gain value, the value can be put
  *  into a lookup table to obtain the approximate cable length
  *  for each channel.
  **/
@@ -1761,7 +1877,7 @@ s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw)
 
 		/*
 		 * Getting bits 15:9, which represent the combination of
-		 * course and fine gain values.  The result is a number
+		 * coarse and fine gain values.  The result is a number
 		 * that can be put into the lookup table to obtain the
 		 * approximate cable length.
 		 */
@@ -1815,8 +1931,8 @@ s32 e1000e_get_phy_info_m88(struct e1000_hw *hw)
 	u16 phy_data;
 	bool link;
 
-	if (hw->phy.media_type != e1000_media_type_copper) {
-		hw_dbg(hw, "Phy info is only valid for copper media\n");
+	if (phy->media_type != e1000_media_type_copper) {
+		e_dbg("Phy info is only valid for copper media\n");
 		return -E1000_ERR_CONFIG;
 	}
 
@@ -1825,7 +1941,7 @@ s32 e1000e_get_phy_info_m88(struct e1000_hw *hw)
 		return ret_val;
 
 	if (!link) {
-		hw_dbg(hw, "Phy info is only valid if link is up\n");
+		e_dbg("Phy info is only valid if link is up\n");
 		return -E1000_ERR_CONFIG;
 	}
 
@@ -1893,11 +2009,11 @@ s32 e1000e_get_phy_info_igp(struct e1000_hw *hw)
 		return ret_val;
 
 	if (!link) {
-		hw_dbg(hw, "Phy info is only valid if link is up\n");
+		e_dbg("Phy info is only valid if link is up\n");
 		return -E1000_ERR_CONFIG;
 	}
 
-	phy->polarity_correction = 1;
+	phy->polarity_correction = true;
 
 	ret_val = e1000_check_polarity_igp(hw);
 	if (ret_val)
@@ -1936,6 +2052,61 @@ s32 e1000e_get_phy_info_igp(struct e1000_hw *hw)
 }
 
 /**
+ *  e1000_get_phy_info_ife - Retrieves various IFE PHY states
+ *  @hw: pointer to the HW structure
+ *
+ *  Populates "phy" structure with various feature states.
+ **/
+s32 e1000_get_phy_info_ife(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+	bool link;
+
+	ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
+	if (ret_val)
+		goto out;
+
+	if (!link) {
+		e_dbg("Phy info is only valid if link is up\n");
+		ret_val = -E1000_ERR_CONFIG;
+		goto out;
+	}
+
+	ret_val = e1e_rphy(hw, IFE_PHY_SPECIAL_CONTROL, &data);
+	if (ret_val)
+		goto out;
+	phy->polarity_correction = (data & IFE_PSC_AUTO_POLARITY_DISABLE)
+	                           ? false : true;
+
+	if (phy->polarity_correction) {
+		ret_val = e1000_check_polarity_ife(hw);
+		if (ret_val)
+			goto out;
+	} else {
+		/* Polarity is forced */
+		phy->cable_polarity = (data & IFE_PSC_FORCE_POLARITY)
+		                      ? e1000_rev_polarity_reversed
+		                      : e1000_rev_polarity_normal;
+	}
+
+	ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &data);
+	if (ret_val)
+		goto out;
+
+	phy->is_mdix = (data & IFE_PMC_MDIX_STATUS) ? true : false;
+
+	/* The following parameters are undefined for 10/100 operation. */
+	phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
+	phy->local_rx = e1000_1000t_rx_status_undefined;
+	phy->remote_rx = e1000_1000t_rx_status_undefined;
+
+out:
+	return ret_val;
+}
+
+/**
  *  e1000e_phy_sw_reset - PHY software reset
  *  @hw: pointer to the HW structure
  *
@@ -1980,7 +2151,7 @@ s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw)
 	if (ret_val)
 		return 0;
 
-	ret_val = phy->ops.acquire_phy(hw);
+	ret_val = phy->ops.acquire(hw);
 	if (ret_val)
 		return ret_val;
 
@@ -1995,7 +2166,7 @@ s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw)
 
 	udelay(150);
 
-	phy->ops.release_phy(hw);
+	phy->ops.release(hw);
 
 	return e1000_get_phy_cfg_done(hw);
 }
@@ -2021,7 +2192,7 @@ s32 e1000e_get_cfg_done(struct e1000_hw *hw)
  **/
 s32 e1000e_phy_init_script_igp3(struct e1000_hw *hw)
 {
-	hw_dbg(hw, "Running IGP 3 PHY init script\n");
+	e_dbg("Running IGP 3 PHY init script\n");
 
 	/* PHY init IGP 3 */
 	/* Enable rise/fall, 10-mode work in class-A */
@@ -2189,28 +2360,34 @@ enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id)
 s32 e1000e_determine_phy_address(struct e1000_hw *hw)
 {
 	s32 ret_val = -E1000_ERR_PHY_TYPE;
-	u32 phy_addr= 0;
-	u32 i = 0;
+	u32 phy_addr = 0;
+	u32 i;
 	enum e1000_phy_type phy_type = e1000_phy_unknown;
 
-	do {
-		for (phy_addr = 0; phy_addr < 4; phy_addr++) {
-			hw->phy.addr = phy_addr;
+	hw->phy.id = phy_type;
+
+	for (phy_addr = 0; phy_addr < E1000_MAX_PHY_ADDR; phy_addr++) {
+		hw->phy.addr = phy_addr;
+		i = 0;
+
+		do {
 			e1000e_get_phy_id(hw);
 			phy_type = e1000e_get_phy_type_from_id(hw->phy.id);
 
-			/* 
+			/*
 			 * If phy_type is valid, break - we found our
 			 * PHY address
 			 */
 			if (phy_type  != e1000_phy_unknown) {
 				ret_val = 0;
-				break;
+				goto out;
 			}
-		}
-		i++;
-	} while ((ret_val != 0) && (i < 100));
+			msleep(1);
+			i++;
+		} while (i < 10);
+	}
 
+out:
 	return ret_val;
 }
 
@@ -2246,7 +2423,7 @@ s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data)
 	u32 page = offset >> IGP_PAGE_SHIFT;
 	u32 page_shift = 0;
 
-	ret_val = hw->phy.ops.acquire_phy(hw);
+	ret_val = hw->phy.ops.acquire(hw);
 	if (ret_val)
 		return ret_val;
 
@@ -2284,7 +2461,7 @@ s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data)
 	                                    data);
 
 out:
-	hw->phy.ops.release_phy(hw);
+	hw->phy.ops.release(hw);
 	return ret_val;
 }
 
@@ -2305,7 +2482,7 @@ s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data)
 	u32 page = offset >> IGP_PAGE_SHIFT;
 	u32 page_shift = 0;
 
-	ret_val = hw->phy.ops.acquire_phy(hw);
+	ret_val = hw->phy.ops.acquire(hw);
 	if (ret_val)
 		return ret_val;
 
@@ -2342,7 +2519,7 @@ s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data)
 	ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
 	                                   data);
 out:
-	hw->phy.ops.release_phy(hw);
+	hw->phy.ops.release(hw);
 	return ret_val;
 }
 
@@ -2361,7 +2538,7 @@ s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data)
 	s32 ret_val;
 	u16 page = (u16)(offset >> IGP_PAGE_SHIFT);
 
-	ret_val = hw->phy.ops.acquire_phy(hw);
+	ret_val = hw->phy.ops.acquire(hw);
 	if (ret_val)
 		return ret_val;
 
@@ -2387,7 +2564,7 @@ s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data)
 	ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
 					   data);
 out:
-	hw->phy.ops.release_phy(hw);
+	hw->phy.ops.release(hw);
 	return ret_val;
 }
 
@@ -2405,7 +2582,7 @@ s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data)
 	s32 ret_val;
 	u16 page = (u16)(offset >> IGP_PAGE_SHIFT);
 
-	ret_val = hw->phy.ops.acquire_phy(hw);
+	ret_val = hw->phy.ops.acquire(hw);
 	if (ret_val)
 		return ret_val;
 
@@ -2431,7 +2608,7 @@ s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data)
 					    data);
 
 out:
-	hw->phy.ops.release_phy(hw);
+	hw->phy.ops.release(hw);
 	return ret_val;
 }
 
@@ -2464,7 +2641,7 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
 	/* Gig must be disabled for MDIO accesses to page 800 */
 	if ((hw->mac.type == e1000_pchlan) &&
 	   (!(er32(PHY_CTRL) & E1000_PHY_CTRL_GBE_DISABLE)))
-		hw_dbg(hw, "Attempting to access page 800 while gig enabled\n");
+		e_dbg("Attempting to access page 800 while gig enabled.\n");
 
 	/* All operations in this function are phy address 1 */
 	hw->phy.addr = 1;
@@ -2474,20 +2651,26 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
 	                          (BM_WUC_ENABLE_PAGE << IGP_PAGE_SHIFT));
 
 	ret_val = e1000e_read_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, &phy_reg);
-	if (ret_val)
+	if (ret_val) {
+		e_dbg("Could not read PHY page 769\n");
 		goto out;
+	}
 
 	/* First clear bit 4 to avoid a power state change */
 	phy_reg &= ~(BM_WUC_HOST_WU_BIT);
 	ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg);
-	if (ret_val)
+	if (ret_val) {
+		e_dbg("Could not clear PHY page 769 bit 4\n");
 		goto out;
+	}
 
 	/* Write bit 2 = 1, and clear bit 4 to 769_17 */
 	ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG,
 	                                    phy_reg | BM_WUC_ENABLE_BIT);
-	if (ret_val)
+	if (ret_val) {
+		e_dbg("Could not write PHY page 769 bit 2\n");
 		goto out;
+	}
 
 	/* Select page 800 */
 	ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
@@ -2495,21 +2678,25 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
 
 	/* Write the page 800 offset value using opcode 0x11 */
 	ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ADDRESS_OPCODE, reg);
-	if (ret_val)
+	if (ret_val) {
+		e_dbg("Could not write address opcode to page 800\n");
 		goto out;
+	}
 
 	if (read) {
 	        /* Read the page 800 value using opcode 0x12 */
 		ret_val = e1000e_read_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE,
 		                                   data);
 	} else {
-	        /* Read the page 800 value using opcode 0x12 */
+	        /* Write the page 800 value using opcode 0x12 */
 		ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE,
 						    *data);
 	}
 
-	if (ret_val)
+	if (ret_val) {
+		e_dbg("Could not access data value from page 800\n");
 		goto out;
+	}
 
 	/*
 	 * Restore 769_17.2 to its original value
@@ -2520,12 +2707,53 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
 
 	/* Clear 769_17.2 */
 	ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg);
+	if (ret_val) {
+		e_dbg("Could not clear PHY page 769 bit 2\n");
+		goto out;
+	}
 
 out:
 	return ret_val;
 }
 
 /**
+ * e1000_power_up_phy_copper - Restore copper link in case of PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, or wake on lan is not enabled, restore the link to previous
+ * settings.
+ **/
+void e1000_power_up_phy_copper(struct e1000_hw *hw)
+{
+	u16 mii_reg = 0;
+
+	/* The PHY will retain its settings across a power down/up cycle */
+	e1e_rphy(hw, PHY_CONTROL, &mii_reg);
+	mii_reg &= ~MII_CR_POWER_DOWN;
+	e1e_wphy(hw, PHY_CONTROL, mii_reg);
+}
+
+/**
+ * e1000_power_down_phy_copper - Restore copper link in case of PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, or wake on lan is not enabled, restore the link to previous
+ * settings.
+ **/
+void e1000_power_down_phy_copper(struct e1000_hw *hw)
+{
+	u16 mii_reg = 0;
+
+	/* The PHY will retain its settings across a power down/up cycle */
+	e1e_rphy(hw, PHY_CONTROL, &mii_reg);
+	mii_reg |= MII_CR_POWER_DOWN;
+	e1e_wphy(hw, PHY_CONTROL, mii_reg);
+	msleep(1);
+}
+
+/**
  *  e1000e_commit_phy - Soft PHY reset
  *  @hw: pointer to the HW structure
  *
@@ -2534,8 +2762,8 @@ out:
  **/
 s32 e1000e_commit_phy(struct e1000_hw *hw)
 {
-	if (hw->phy.ops.commit_phy)
-		return hw->phy.ops.commit_phy(hw);
+	if (hw->phy.ops.commit)
+		return hw->phy.ops.commit(hw);
 
 	return 0;
 }
@@ -2614,7 +2842,7 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data,
 	bool in_slow_mode = false;
 
 	if (!locked) {
-		ret_val = hw->phy.ops.acquire_phy(hw);
+		ret_val = hw->phy.ops.acquire(hw);
 		if (ret_val)
 			return ret_val;
 	}
@@ -2670,7 +2898,7 @@ out:
 		ret_val |= e1000_set_mdio_slow_mode_hv(hw, false);
 
 	if (!locked)
-		hw->phy.ops.release_phy(hw);
+		hw->phy.ops.release(hw);
 
 	return ret_val;
 }
@@ -2723,7 +2951,7 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
 	bool in_slow_mode = false;
 
 	if (!locked) {
-		ret_val = hw->phy.ops.acquire_phy(hw);
+		ret_val = hw->phy.ops.acquire(hw);
 		if (ret_val)
 			return ret_val;
 	}
@@ -2796,7 +3024,7 @@ out:
 		ret_val |= e1000_set_mdio_slow_mode_hv(hw, false);
 
 	if (!locked)
-		hw->phy.ops.release_phy(hw);
+		hw->phy.ops.release(hw);
 
 	return ret_val;
 }
@@ -2872,7 +3100,7 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
 	/* masking with 0x3F to remove the page from offset */
 	ret_val = e1000e_write_phy_reg_mdic(hw, addr_reg, (u16)offset & 0x3F);
 	if (ret_val) {
-		hw_dbg(hw, "Could not write PHY the HV address register\n");
+		e_dbg("Could not write PHY the HV address register\n");
 		goto out;
 	}
 
@@ -2883,7 +3111,7 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
 		ret_val = e1000e_write_phy_reg_mdic(hw, data_reg, *data);
 
 	if (ret_val) {
-		hw_dbg(hw, "Could not read data value from HV data register\n");
+		e_dbg("Could not read data value from HV data register\n");
 		goto out;
 	}
 
@@ -2911,12 +3139,12 @@ s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw)
 		goto out;
 
 	/* Do not apply workaround if in PHY loopback bit 14 set */
-	hw->phy.ops.read_phy_reg(hw, PHY_CONTROL, &data);
+	hw->phy.ops.read_reg(hw, PHY_CONTROL, &data);
 	if (data & PHY_CONTROL_LB)
 		goto out;
 
 	/* check if link is up and at 1Gbps */
-	ret_val = hw->phy.ops.read_phy_reg(hw, BM_CS_STATUS, &data);
+	ret_val = hw->phy.ops.read_reg(hw, BM_CS_STATUS, &data);
 	if (ret_val)
 		goto out;
 
@@ -2932,13 +3160,13 @@ s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw)
 	mdelay(200);
 
 	/* flush the packets in the fifo buffer */
-	ret_val = hw->phy.ops.write_phy_reg(hw, HV_MUX_DATA_CTRL,
+	ret_val = hw->phy.ops.write_reg(hw, HV_MUX_DATA_CTRL,
 	                                HV_MUX_DATA_CTRL_GEN_TO_MAC |
 	                                HV_MUX_DATA_CTRL_FORCE_SPEED);
 	if (ret_val)
 		goto out;
 
-	ret_val = hw->phy.ops.write_phy_reg(hw, HV_MUX_DATA_CTRL,
+	ret_val = hw->phy.ops.write_reg(hw, HV_MUX_DATA_CTRL,
 	                                HV_MUX_DATA_CTRL_GEN_TO_MAC);
 
 out:
@@ -2959,7 +3187,7 @@ s32 e1000_check_polarity_82577(struct e1000_hw *hw)
 	s32 ret_val;
 	u16 data;
 
-	ret_val = phy->ops.read_phy_reg(hw, I82577_PHY_STATUS_2, &data);
+	ret_val = phy->ops.read_reg(hw, I82577_PHY_STATUS_2, &data);
 
 	if (!ret_val)
 		phy->cable_polarity = (data & I82577_PHY_STATUS2_REV_POLARITY)
@@ -2984,13 +3212,13 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw)
 	u16 phy_data;
 	bool link;
 
-	ret_val = phy->ops.read_phy_reg(hw, PHY_CONTROL, &phy_data);
+	ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data);
 	if (ret_val)
 		goto out;
 
 	e1000e_phy_force_speed_duplex_setup(hw, &phy_data);
 
-	ret_val = phy->ops.write_phy_reg(hw, PHY_CONTROL, phy_data);
+	ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data);
 	if (ret_val)
 		goto out;
 
@@ -2998,23 +3226,23 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw)
 	 * Clear Auto-Crossover to force MDI manually.  82577 requires MDI
 	 * forced whenever speed and duplex are forced.
 	 */
-	ret_val = phy->ops.read_phy_reg(hw, I82577_PHY_CTRL_2, &phy_data);
+	ret_val = phy->ops.read_reg(hw, I82577_PHY_CTRL_2, &phy_data);
 	if (ret_val)
 		goto out;
 
 	phy_data &= ~I82577_PHY_CTRL2_AUTO_MDIX;
 	phy_data &= ~I82577_PHY_CTRL2_FORCE_MDI_MDIX;
 
-	ret_val = phy->ops.write_phy_reg(hw, I82577_PHY_CTRL_2, phy_data);
+	ret_val = phy->ops.write_reg(hw, I82577_PHY_CTRL_2, phy_data);
 	if (ret_val)
 		goto out;
 
-	hw_dbg(hw, "I82577_PHY_CTRL_2: %X\n", phy_data);
+	e_dbg("I82577_PHY_CTRL_2: %X\n", phy_data);
 
 	udelay(1);
 
 	if (phy->autoneg_wait_to_complete) {
-		hw_dbg(hw, "Waiting for forced speed/duplex link on 82577 phy\n");
+		e_dbg("Waiting for forced speed/duplex link on 82577 phy\n");
 
 		ret_val = e1000e_phy_has_link_generic(hw,
 		                                     PHY_FORCE_LIMIT,
@@ -3024,7 +3252,7 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw)
 			goto out;
 
 		if (!link)
-			hw_dbg(hw, "Link taking longer than expected.\n");
+			e_dbg("Link taking longer than expected.\n");
 
 		/* Try once more */
 		ret_val = e1000e_phy_has_link_generic(hw,
@@ -3060,7 +3288,7 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw)
 		goto out;
 
 	if (!link) {
-		hw_dbg(hw, "Phy info is only valid if link is up\n");
+		e_dbg("Phy info is only valid if link is up\n");
 		ret_val = -E1000_ERR_CONFIG;
 		goto out;
 	}
@@ -3071,7 +3299,7 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw)
 	if (ret_val)
 		goto out;
 
-	ret_val = phy->ops.read_phy_reg(hw, I82577_PHY_STATUS_2, &data);
+	ret_val = phy->ops.read_reg(hw, I82577_PHY_STATUS_2, &data);
 	if (ret_val)
 		goto out;
 
@@ -3083,7 +3311,7 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw)
 		if (ret_val)
 			goto out;
 
-		ret_val = phy->ops.read_phy_reg(hw, PHY_1000T_STATUS, &data);
+		ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &data);
 		if (ret_val)
 			goto out;
 
@@ -3117,7 +3345,7 @@ s32 e1000_get_cable_length_82577(struct e1000_hw *hw)
 	s32 ret_val;
 	u16 phy_data, length;
 
-	ret_val = phy->ops.read_phy_reg(hw, I82577_PHY_DIAG_STATUS, &phy_data);
+	ret_val = phy->ops.read_reg(hw, I82577_PHY_DIAG_STATUS, &phy_data);
 	if (ret_val)
 		goto out;
 
@@ -3125,7 +3353,7 @@ s32 e1000_get_cable_length_82577(struct e1000_hw *hw)
 	         I82577_DSTATUS_CABLE_LENGTH_SHIFT;
 
 	if (length == E1000_CABLE_LENGTH_UNDEFINED)
-		ret_val = E1000_ERR_PHY;
+		ret_val = -E1000_ERR_PHY;
 
 	phy->cable_length = length;