8390: Move the 8390 related drivers

Moves the drivers for the National Semi-conductor 8390 chipset into
drivers/net/ethernet/8390/ and the necessary Kconfig and Makefile
changes.

CC: Donald Becker <becker@scyld.com>
CC: Paul Gortmaker <paul.gortmaker@windriver.com>
CC: Alain Malek <alain.malek@cryogen.com>
CC: Peter De Schrijver <p2@mind.be>
CC: "David Huggins-Daines" <dhd@debian.org>
CC: Wim Dumon <wimpie@kotnet.org>
CC: Yoshinori Sato <ysato@users.sourceforge.jp>
CC: David Hinds <dahinds@users.sourceforge.net>
CC: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 0 insertions, 490 deletions

diff --git a/drivers/net/e2100.c b/drivers/net/e2100.c
deleted file mode 100644
index d50a9998ae7..00000000000
--- a/drivers/net/e2100.c
+++ /dev/null
@@ -1,490 +0,0 @@
-/* e2100.c: A Cabletron E2100 series ethernet driver for linux. */
-/*
-	Written 1993-1994 by Donald Becker.
-
-	Copyright 1994 by Donald Becker.
-	Copyright 1993 United States Government as represented by the
-	Director, National Security Agency.  This software may be used and
-	distributed according to the terms of the GNU General Public License,
-	incorporated herein by reference.
-
-	This is a driver for the Cabletron E2100 series ethercards.
-
-	The Author may be reached as becker@scyld.com, or C/O
-	Scyld Computing Corporation
-	410 Severn Ave., Suite 210
-	Annapolis MD 21403
-
-	The E2100 series ethercard is a fairly generic shared memory 8390
-	implementation.  The only unusual aspect is the way the shared memory
-	registers are set: first you do an inb() in what is normally the
-	station address region, and the low three bits of next outb() *address*
-	is used	as the write value for that register.  Either someone wasn't
-	too used to dem bit en bites, or they were trying to obfuscate the
-	programming interface.
-
-	There is an additional complication when setting the window on the packet
-	buffer.  You must first do a read into the packet buffer region with the
-	low 8 address bits the address setting the page for the start of the packet
-	buffer window, and then do the above operation.  See mem_on() for details.
-
-	One bug on the chip is that even a hard reset won't disable the memory
-	window, usually resulting in a hung machine if mem_off() isn't called.
-	If this happens, you must power down the machine for about 30 seconds.
-*/
-
-static const char version[] =
-	"e2100.c:v1.01 7/21/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/ioport.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-
-#include <asm/io.h>
-#include <asm/system.h>
-
-#include "8390.h"
-
-#define DRV_NAME "e2100"
-
-static int e21_probe_list[] = {0x300, 0x280, 0x380, 0x220, 0};
-
-/* Offsets from the base_addr.
-   Read from the ASIC register, and the low three bits of the next outb()
-   address is used to set the corresponding register. */
-#define E21_NIC_OFFSET  0		/* Offset to the 8390 NIC. */
-#define E21_ASIC		0x10
-#define E21_MEM_ENABLE	0x10
-#define  E21_MEM_ON		0x05	/* Enable memory in 16 bit mode. */
-#define  E21_MEM_ON_8	0x07	/* Enable memory in  8 bit mode. */
-#define E21_MEM_BASE	0x11
-#define E21_IRQ_LOW		0x12	/* The low three bits of the IRQ number. */
-#define E21_IRQ_HIGH	0x14	/* The high IRQ bit and media select ...  */
-#define E21_MEDIA		0x14	/* (alias). */
-#define  E21_ALT_IFPORT 0x02	/* Set to use the other (BNC,AUI) port. */
-#define  E21_BIG_MEM	0x04	/* Use a bigger (64K) buffer (we don't) */
-#define E21_SAPROM		0x10	/* Offset to station address data. */
-#define E21_IO_EXTENT	 0x20
-
-static inline void mem_on(short port, volatile char __iomem *mem_base,
-						  unsigned char start_page )
-{
-	/* This is a little weird: set the shared memory window by doing a
-	   read.  The low address bits specify the starting page. */
-	readb(mem_base+start_page);
-	inb(port + E21_MEM_ENABLE);
-	outb(E21_MEM_ON, port + E21_MEM_ENABLE + E21_MEM_ON);
-}
-
-static inline void mem_off(short port)
-{
-	inb(port + E21_MEM_ENABLE);
-	outb(0x00, port + E21_MEM_ENABLE);
-}
-
-/* In other drivers I put the TX pages first, but the E2100 window circuitry
-   is designed to have a 4K Tx region last. The windowing circuitry wraps the
-   window at 0x2fff->0x0000 so that the packets at e.g. 0x2f00 in the RX ring
-   appear contiguously in the window. */
-#define E21_RX_START_PG		0x00	/* First page of RX buffer */
-#define E21_RX_STOP_PG		0x30	/* Last page +1 of RX ring */
-#define E21_BIG_RX_STOP_PG	0xF0	/* Last page +1 of RX ring */
-#define E21_TX_START_PG		E21_RX_STOP_PG	/* First page of TX buffer */
-
-static int e21_probe1(struct net_device *dev, int ioaddr);
-
-static int e21_open(struct net_device *dev);
-static void e21_reset_8390(struct net_device *dev);
-static void e21_block_input(struct net_device *dev, int count,
-						   struct sk_buff *skb, int ring_offset);
-static void e21_block_output(struct net_device *dev, int count,
-							 const unsigned char *buf, int start_page);
-static void e21_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
-							int ring_page);
-static int e21_open(struct net_device *dev);
-static int e21_close(struct net_device *dev);
-
-
-/*  Probe for the E2100 series ethercards.  These cards have an 8390 at the
-	base address and the station address at both offset 0x10 and 0x18.  I read
-	the station address from offset 0x18 to avoid the dataport of NE2000
-	ethercards, and look for Ctron's unique ID (first three octets of the
-	station address).
- */
-
-static int  __init do_e2100_probe(struct net_device *dev)
-{
-	int *port;
-	int base_addr = dev->base_addr;
-	int irq = dev->irq;
-
-	if (base_addr > 0x1ff)		/* Check a single specified location. */
-		return e21_probe1(dev, base_addr);
-	else if (base_addr != 0)	/* Don't probe at all. */
-		return -ENXIO;
-
-	for (port = e21_probe_list; *port; port++) {
-		dev->irq = irq;
-		if (e21_probe1(dev, *port) == 0)
-			return 0;
-	}
-
-	return -ENODEV;
-}
-
-#ifndef MODULE
-struct net_device * __init e2100_probe(int unit)
-{
-	struct net_device *dev = alloc_ei_netdev();
-	int err;
-
-	if (!dev)
-		return ERR_PTR(-ENOMEM);
-
-	sprintf(dev->name, "eth%d", unit);
-	netdev_boot_setup_check(dev);
-
-	err = do_e2100_probe(dev);
-	if (err)
-		goto out;
-	return dev;
-out:
-	free_netdev(dev);
-	return ERR_PTR(err);
-}
-#endif
-
-static const struct net_device_ops e21_netdev_ops = {
-	.ndo_open		= e21_open,
-	.ndo_stop		= e21_close,
-
-	.ndo_start_xmit		= ei_start_xmit,
-	.ndo_tx_timeout		= ei_tx_timeout,
-	.ndo_get_stats		= ei_get_stats,
-	.ndo_set_multicast_list = ei_set_multicast_list,
-	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_mac_address 	= eth_mac_addr,
-	.ndo_change_mtu		= eth_change_mtu,
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	.ndo_poll_controller 	= ei_poll,
-#endif
-};
-
-static int __init e21_probe1(struct net_device *dev, int ioaddr)
-{
-	int i, status, retval;
-	unsigned char *station_addr = dev->dev_addr;
-	static unsigned version_printed;
-
-	if (!request_region(ioaddr, E21_IO_EXTENT, DRV_NAME))
-		return -EBUSY;
-
-	/* First check the station address for the Ctron prefix. */
-	if (inb(ioaddr + E21_SAPROM + 0) != 0x00 ||
-	    inb(ioaddr + E21_SAPROM + 1) != 0x00 ||
-	    inb(ioaddr + E21_SAPROM + 2) != 0x1d) {
-		retval = -ENODEV;
-		goto out;
-	}
-
-	/* Verify by making certain that there is a 8390 at there. */
-	outb(E8390_NODMA + E8390_STOP, ioaddr);
-	udelay(1);	/* we want to delay one I/O cycle - which is 2MHz */
-	status = inb(ioaddr);
-	if (status != 0x21 && status != 0x23) {
-		retval = -ENODEV;
-		goto out;
-	}
-
-	/* Read the station address PROM.  */
-	for (i = 0; i < 6; i++)
-		station_addr[i] = inb(ioaddr + E21_SAPROM + i);
-
-	inb(ioaddr + E21_MEDIA); 		/* Point to media selection. */
-	outb(0, ioaddr + E21_ASIC); 	/* and disable the secondary interface. */
-
-	if (ei_debug  &&  version_printed++ == 0)
-		printk(version);
-
-	for (i = 0; i < 6; i++)
-		printk(" %02X", station_addr[i]);
-
-	if (dev->irq < 2) {
-		static const int irqlist[] = {15, 11, 10, 12, 5, 9, 3, 4};
-		for (i = 0; i < ARRAY_SIZE(irqlist); i++)
-			if (request_irq (irqlist[i], NULL, 0, "bogus", NULL) != -EBUSY) {
-				dev->irq = irqlist[i];
-				break;
-			}
-		if (i >= ARRAY_SIZE(irqlist)) {
-			printk(" unable to get IRQ %d.\n", dev->irq);
-			retval = -EAGAIN;
-			goto out;
-		}
-	} else if (dev->irq == 2)	/* Fixup luser bogosity: IRQ2 is really IRQ9 */
-		dev->irq = 9;
-
-	/* The 8390 is at the base address. */
-	dev->base_addr = ioaddr;
-
-	ei_status.name = "E2100";
-	ei_status.word16 = 1;
-	ei_status.tx_start_page = E21_TX_START_PG;
-	ei_status.rx_start_page = E21_RX_START_PG;
-	ei_status.stop_page = E21_RX_STOP_PG;
-	ei_status.saved_irq = dev->irq;
-
-	/* Check the media port used.  The port can be passed in on the
-	   low mem_end bits. */
-	if (dev->mem_end & 15)
-		dev->if_port = dev->mem_end & 7;
-	else {
-		dev->if_port = 0;
-		inb(ioaddr + E21_MEDIA); 	/* Turn automatic media detection on. */
-		for(i = 0; i < 6; i++)
-			if (station_addr[i] != inb(ioaddr + E21_SAPROM + 8 + i)) {
-				dev->if_port = 1;
-				break;
-			}
-	}
-
-	/* Never map in the E21 shared memory unless you are actively using it.
-	   Also, the shared memory has effective only one setting -- spread all
-	   over the 128K region! */
-	if (dev->mem_start == 0)
-		dev->mem_start = 0xd0000;
-
-	ei_status.mem = ioremap(dev->mem_start, 2*1024);
-	if (!ei_status.mem) {
-		printk("unable to remap memory\n");
-		retval = -EAGAIN;
-		goto out;
-	}
-
-#ifdef notdef
-	/* These values are unused.  The E2100 has a 2K window into the packet
-	   buffer.  The window can be set to start on any page boundary. */
-	ei_status.rmem_start = dev->mem_start + TX_PAGES*256;
-	dev->mem_end = ei_status.rmem_end = dev->mem_start + 2*1024;
-#endif
-
-	printk(", IRQ %d, %s media, memory @ %#lx.\n", dev->irq,
-		   dev->if_port ? "secondary" : "primary", dev->mem_start);
-
-	ei_status.reset_8390 = &e21_reset_8390;
-	ei_status.block_input = &e21_block_input;
-	ei_status.block_output = &e21_block_output;
-	ei_status.get_8390_hdr = &e21_get_8390_hdr;
-
-	dev->netdev_ops = &e21_netdev_ops;
-	NS8390_init(dev, 0);
-
-	retval = register_netdev(dev);
-	if (retval)
-		goto out;
-	return 0;
-out:
-	release_region(ioaddr, E21_IO_EXTENT);
-	return retval;
-}
-
-static int
-e21_open(struct net_device *dev)
-{
-	short ioaddr = dev->base_addr;
-	int retval;
-
-	if ((retval = request_irq(dev->irq, ei_interrupt, 0, dev->name, dev)))
-		return retval;
-
-	/* Set the interrupt line and memory base on the hardware. */
-	inb(ioaddr + E21_IRQ_LOW);
-	outb(0, ioaddr + E21_ASIC + (dev->irq & 7));
-	inb(ioaddr + E21_IRQ_HIGH); 			/* High IRQ bit, and if_port. */
-	outb(0, ioaddr + E21_ASIC + (dev->irq > 7 ? 1:0)
-		   + (dev->if_port ? E21_ALT_IFPORT : 0));
-	inb(ioaddr + E21_MEM_BASE);
-	outb(0, ioaddr + E21_ASIC + ((dev->mem_start >> 17) & 7));
-
-	ei_open(dev);
-	return 0;
-}
-
-static void
-e21_reset_8390(struct net_device *dev)
-{
-	short ioaddr = dev->base_addr;
-
-	outb(0x01, ioaddr);
-	if (ei_debug > 1) printk("resetting the E2180x3 t=%ld...", jiffies);
-	ei_status.txing = 0;
-
-	/* Set up the ASIC registers, just in case something changed them. */
-
-	if (ei_debug > 1) printk("reset done\n");
-}
-
-/* Grab the 8390 specific header. We put the 2k window so the header page
-   appears at the start of the shared memory. */
-
-static void
-e21_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
-{
-
-	short ioaddr = dev->base_addr;
-	char __iomem *shared_mem = ei_status.mem;
-
-	mem_on(ioaddr, shared_mem, ring_page);
-
-#ifdef notdef
-	/* Officially this is what we are doing, but the readl() is faster */
-	memcpy_fromio(hdr, shared_mem, sizeof(struct e8390_pkt_hdr));
-#else
-	((unsigned int*)hdr)[0] = readl(shared_mem);
-#endif
-
-	/* Turn off memory access: we would need to reprogram the window anyway. */
-	mem_off(ioaddr);
-
-}
-
-/*  Block input and output are easy on shared memory ethercards.
-	The E21xx makes block_input() especially easy by wrapping the top
-	ring buffer to the bottom automatically. */
-static void
-e21_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
-{
-	short ioaddr = dev->base_addr;
-	char __iomem *shared_mem = ei_status.mem;
-
-	mem_on(ioaddr, shared_mem, (ring_offset>>8));
-
-	memcpy_fromio(skb->data, ei_status.mem + (ring_offset & 0xff), count);
-
-	mem_off(ioaddr);
-}
-
-static void
-e21_block_output(struct net_device *dev, int count, const unsigned char *buf,
-				 int start_page)
-{
-	short ioaddr = dev->base_addr;
-	volatile char __iomem *shared_mem = ei_status.mem;
-
-	/* Set the shared memory window start by doing a read, with the low address
-	   bits specifying the starting page. */
-	readb(shared_mem + start_page);
-	mem_on(ioaddr, shared_mem, start_page);
-
-	memcpy_toio(shared_mem, buf, count);
-	mem_off(ioaddr);
-}
-
-static int
-e21_close(struct net_device *dev)
-{
-	short ioaddr = dev->base_addr;
-
-	if (ei_debug > 1)
-		printk("%s: Shutting down ethercard.\n", dev->name);
-
-	free_irq(dev->irq, dev);
-	dev->irq = ei_status.saved_irq;
-
-	/* Shut off the interrupt line and secondary interface. */
-	inb(ioaddr + E21_IRQ_LOW);
-	outb(0, ioaddr + E21_ASIC);
-	inb(ioaddr + E21_IRQ_HIGH); 			/* High IRQ bit, and if_port. */
-	outb(0, ioaddr + E21_ASIC);
-
-	ei_close(dev);
-
-	/* Double-check that the memory has been turned off, because really
-	   really bad things happen if it isn't. */
-	mem_off(ioaddr);
-
-	return 0;
-}
-
-
-#ifdef MODULE
-#define MAX_E21_CARDS	4	/* Max number of E21 cards per module */
-static struct net_device *dev_e21[MAX_E21_CARDS];
-static int io[MAX_E21_CARDS];
-static int irq[MAX_E21_CARDS];
-static int mem[MAX_E21_CARDS];
-static int xcvr[MAX_E21_CARDS];		/* choose int. or ext. xcvr */
-
-module_param_array(io, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
-module_param_array(mem, int, NULL, 0);
-module_param_array(xcvr, int, NULL, 0);
-MODULE_PARM_DESC(io, "I/O base address(es)");
-MODULE_PARM_DESC(irq, "IRQ number(s)");
-MODULE_PARM_DESC(mem, " memory base address(es)");
-MODULE_PARM_DESC(xcvr, "transceiver(s) (0=internal, 1=external)");
-MODULE_DESCRIPTION("Cabletron E2100 ISA ethernet driver");
-MODULE_LICENSE("GPL");
-
-/* This is set up so that only a single autoprobe takes place per call.
-ISA device autoprobes on a running machine are not recommended. */
-
-int __init init_module(void)
-{
-	struct net_device *dev;
-	int this_dev, found = 0;
-
-	for (this_dev = 0; this_dev < MAX_E21_CARDS; this_dev++) {
-		if (io[this_dev] == 0)  {
-			if (this_dev != 0) break; /* only autoprobe 1st one */
-			printk(KERN_NOTICE "e2100.c: Presently autoprobing (not recommended) for a single card.\n");
-		}
-		dev = alloc_ei_netdev();
-		if (!dev)
-			break;
-		dev->irq = irq[this_dev];
-		dev->base_addr = io[this_dev];
-		dev->mem_start = mem[this_dev];
-		dev->mem_end = xcvr[this_dev];	/* low 4bits = xcvr sel. */
-		if (do_e2100_probe(dev) == 0) {
-			dev_e21[found++] = dev;
-			continue;
-		}
-		free_netdev(dev);
-		printk(KERN_WARNING "e2100.c: No E2100 card found (i/o = 0x%x).\n", io[this_dev]);
-		break;
-	}
-	if (found)
-		return 0;
-	return -ENXIO;
-}
-
-static void cleanup_card(struct net_device *dev)
-{
-	/* NB: e21_close() handles free_irq */
-	iounmap(ei_status.mem);
-	release_region(dev->base_addr, E21_IO_EXTENT);
-}
-
-void __exit
-cleanup_module(void)
-{
-	int this_dev;
-
-	for (this_dev = 0; this_dev < MAX_E21_CARDS; this_dev++) {
-		struct net_device *dev = dev_e21[this_dev];
-		if (dev) {
-			unregister_netdev(dev);
-			cleanup_card(dev);
-			free_netdev(dev);
-		}
-	}
-}
-#endif /* MODULE */