eth16i: Move the Allied Telesis/Fujitsu drivers

Move the Allied Telesis/Fujitsu drivers into drivers/net/ethernet/fujitsu/
and make the necessary Kconfig and Makefile changes.

CC: Shingo Fujimoto <shingo@flab.fujitsu.co.jp>
CC: Yutaka Tamiya <tamy@flab.fujitsu.co.jp>
CC: Rene Schmit <rene@bss.lu>
CC: Mika Kuoppala <miku@iki.fi>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 0 insertions, 1484 deletions

diff --git a/drivers/net/eth16i.c b/drivers/net/eth16i.c
deleted file mode 100644
index 12d28e9d0cb..00000000000
--- a/drivers/net/eth16i.c
+++ /dev/null
@@ -1,1484 +0,0 @@
-/* eth16i.c An ICL EtherTeam 16i and 32 EISA ethernet driver for Linux
-
-   Written 1994-1999 by Mika Kuoppala
-
-   Copyright (C) 1994-1999 by Mika Kuoppala
-   Based on skeleton.c and heavily on at1700.c by Donald Becker
-
-   This software may be used and distributed according to the terms
-   of the GNU General Public License, incorporated herein by reference.
-
-   The author may be reached as miku@iki.fi
-
-   This driver supports following cards :
-	- ICL EtherTeam 16i
-	- ICL EtherTeam 32 EISA
-	  (Uses true 32 bit transfers rather than 16i compatibility mode)
-
-   Example Module usage:
-        insmod eth16i.o io=0x2a0 mediatype=bnc
-
-	mediatype can be one of the following: bnc,tp,dix,auto,eprom
-
-	'auto' will try to autoprobe mediatype.
-	'eprom' will use whatever type defined in eprom.
-
-   I have benchmarked driver with PII/300Mhz as a ftp client
-   and 486/33Mhz as a ftp server. Top speed was 1128.37 kilobytes/sec.
-
-   Sources:
-     - skeleton.c  a sample network driver core for linux,
-       written by Donald Becker <becker@scyld.com>
-     - at1700.c a driver for Allied Telesis AT1700, written
-       by Donald Becker.
-     - e16iSRV.asm a Netware 3.X Server Driver for ICL EtherTeam16i
-       written by Markku Viima
-     - The Fujitsu MB86965 databook.
-
-   Author thanks following persons due to their valueble assistance:
-        Markku Viima (ICL)
-	Ari Valve (ICL)
-	Donald Becker
-	Kurt Huwig <kurt@huwig.de>
-
-   Revision history:
-
-   Version	Date		Description
-
-   0.01         15.12-94        Initial version (card detection)
-   0.02         23.01-95        Interrupt is now hooked correctly
-   0.03         01.02-95        Rewrote initialization part
-   0.04         07.02-95        Base skeleton done...
-                                Made a few changes to signature checking
-                                to make it a bit reliable.
-                                - fixed bug in tx_buf mapping
-                                - fixed bug in initialization (DLC_EN
-                                  wasn't enabled when initialization
-                                  was done.)
-   0.05         08.02-95        If there were more than one packet to send,
-                                transmit was jammed due to invalid
-                                register write...now fixed
-   0.06         19.02-95        Rewrote interrupt handling
-   0.07         13.04-95        Wrote EEPROM read routines
-                                Card configuration now set according to
-                                data read from EEPROM
-   0.08         23.06-95        Wrote part that tries to probe used interface
-                                port if AUTO is selected
-
-   0.09         01.09-95        Added module support
-
-   0.10         04.09-95        Fixed receive packet allocation to work
-                                with kernels > 1.3.x
-
-   0.20		20.09-95	Added support for EtherTeam32 EISA
-
-   0.21         17.10-95        Removed the unnecessary extern
-				init_etherdev() declaration. Some
-				other cleanups.
-
-   0.22		22.02-96	Receive buffer was not flushed
-				correctly when faulty packet was
-				received. Now fixed.
-
-   0.23		26.02-96	Made resetting the adapter
-			 	more reliable.
-
-   0.24		27.02-96	Rewrote faulty packet handling in eth16i_rx
-
-   0.25		22.05-96	kfree() was missing from cleanup_module.
-
-   0.26		11.06-96	Sometimes card was not found by
-				check_signature(). Now made more reliable.
-
-   0.27		23.06-96	Oops. 16 consecutive collisions halted
-				adapter. Now will try to retransmit
-				MAX_COL_16 times before finally giving up.
-
-   0.28	        28.10-97	Added dev_id parameter (NULL) for free_irq
-
-   0.29         29.10-97        Multiple card support for module users
-
-   0.30         30.10-97        Fixed irq allocation bug.
-                                (request_irq moved from probe to open)
-
-   0.30a        21.08-98        Card detection made more relaxed. Driver
-                                had problems with some TCP/IP-PROM boots
-				to find the card. Suggested by
-				Kurt Huwig <kurt@huwig.de>
-
-   0.31         28.08-98        Media interface port can now be selected
-                                with module parameters or kernel
-				boot parameters.
-
-   0.32         31.08-98        IRQ was never freed if open/close
-                                pair wasn't called. Now fixed.
-
-   0.33         10.09-98        When eth16i_open() was called after
-                                eth16i_close() chip never recovered.
-				Now more shallow reset is made on
-				close.
-
-   0.34         29.06-99	Fixed one bad #ifdef.
-				Changed ioaddr -> io for consistency
-
-   0.35         01.07-99        transmit,-receive bytes were never
-                                updated in stats.
-
-   Bugs:
-	In some cases the media interface autoprobing code doesn't find
-	the correct interface type. In this case you can
-	manually choose the interface type in DOS with E16IC.EXE which is
-	configuration software for EtherTeam16i and EtherTeam32 cards.
-	This is also true for IRQ setting. You cannot use module
-	parameter to configure IRQ of the card (yet).
-
-   To do:
-	- Real multicast support
-	- Rewrite the media interface autoprobing code. Its _horrible_ !
-	- Possibly merge all the MB86965 specific code to external
-	  module for use by eth16.c and Donald's at1700.c
-	- IRQ configuration with module parameter. I will do
-	  this when i will get enough info about setting
-	  irq without configuration utility.
-*/
-
-static char *version =
-    "eth16i.c: v0.35 01-Jul-1999 Mika Kuoppala (miku@iki.fi)\n";
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/in.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/bitops.h>
-#include <linux/jiffies.h>
-#include <linux/io.h>
-
-#include <asm/system.h>
-#include <asm/dma.h>
-
-
-
-/* Few macros */
-#define BITSET(ioaddr, bnum)   ((outb(((inb(ioaddr)) | (bnum)), ioaddr)))
-#define BITCLR(ioaddr, bnum)   ((outb(((inb(ioaddr)) & (~(bnum))), ioaddr)))
-
-/* This is the I/O address space for Etherteam 16i adapter. */
-#define ETH16I_IO_EXTENT       32
-
-/* Ticks before deciding that transmit has timed out */
-#define TX_TIMEOUT             (400*HZ/1000)
-
-/* Maximum loop count when receiving packets */
-#define MAX_RX_LOOP            20
-
-/* Some interrupt masks */
-#define ETH16I_INTR_ON	       0xef8a       /* Higher is receive mask */
-#define ETH16I_INTR_OFF	       0x0000
-
-/* Buffers header status byte meanings */
-#define PKT_GOOD               BIT(5)
-#define PKT_GOOD_RMT           BIT(4)
-#define PKT_SHORT              BIT(3)
-#define PKT_ALIGN_ERR          BIT(2)
-#define PKT_CRC_ERR            BIT(1)
-#define PKT_RX_BUF_OVERFLOW    BIT(0)
-
-/* Transmit status register (DLCR0) */
-#define TX_STATUS_REG          0
-#define TX_DONE                BIT(7)
-#define NET_BUSY               BIT(6)
-#define TX_PKT_RCD             BIT(5)
-#define CR_LOST                BIT(4)
-#define TX_JABBER_ERR	       BIT(3)
-#define COLLISION              BIT(2)
-#define COLLISIONS_16          BIT(1)
-
-/* Receive status register (DLCR1) */
-#define RX_STATUS_REG          1
-#define RX_PKT                 BIT(7)  /* Packet received */
-#define BUS_RD_ERR             BIT(6)
-#define SHORT_PKT_ERR          BIT(3)
-#define ALIGN_ERR              BIT(2)
-#define CRC_ERR                BIT(1)
-#define RX_BUF_OVERFLOW        BIT(0)
-
-/* Transmit Interrupt Enable Register (DLCR2) */
-#define TX_INTR_REG            2
-#define TX_INTR_DONE           BIT(7)
-#define TX_INTR_COL            BIT(2)
-#define TX_INTR_16_COL         BIT(1)
-
-/* Receive Interrupt Enable Register (DLCR3) */
-#define RX_INTR_REG            3
-#define RX_INTR_RECEIVE        BIT(7)
-#define RX_INTR_SHORT_PKT      BIT(3)
-#define RX_INTR_CRC_ERR        BIT(1)
-#define RX_INTR_BUF_OVERFLOW   BIT(0)
-
-/* Transmit Mode Register (DLCR4) */
-#define TRANSMIT_MODE_REG      4
-#define LOOPBACK_CONTROL       BIT(1)
-#define CONTROL_OUTPUT         BIT(2)
-
-/* Receive Mode Register (DLCR5) */
-#define RECEIVE_MODE_REG       5
-#define RX_BUFFER_EMPTY        BIT(6)
-#define ACCEPT_BAD_PACKETS     BIT(5)
-#define RECEIVE_SHORT_ADDR     BIT(4)
-#define ACCEPT_SHORT_PACKETS   BIT(3)
-#define REMOTE_RESET           BIT(2)
-
-#define ADDRESS_FILTER_MODE    BIT(1) | BIT(0)
-#define REJECT_ALL             0
-#define ACCEPT_ALL             3
-#define MODE_1                 1            /* NODE ID, BC, MC, 2-24th bit */
-#define MODE_2                 2            /* NODE ID, BC, MC, Hash Table */
-
-/* Configuration Register 0 (DLCR6) */
-#define CONFIG_REG_0           6
-#define DLC_EN                 BIT(7)
-#define SRAM_CYCLE_TIME_100NS  BIT(6)
-#define SYSTEM_BUS_WIDTH_8     BIT(5)       /* 1 = 8bit, 0 = 16bit */
-#define BUFFER_WIDTH_8         BIT(4)       /* 1 = 8bit, 0 = 16bit */
-#define TBS1                   BIT(3)
-#define TBS0                   BIT(2)
-#define SRAM_BS1               BIT(1)       /* 00=8kb,  01=16kb  */
-#define SRAM_BS0               BIT(0)       /* 10=32kb, 11=64kb  */
-
-#ifndef ETH16I_TX_BUF_SIZE                   /* 0 = 2kb, 1 = 4kb  */
-#define ETH16I_TX_BUF_SIZE     3             /* 2 = 8kb, 3 = 16kb */
-#endif
-#define TX_BUF_1x2048          0
-#define TX_BUF_2x2048          1
-#define TX_BUF_2x4098          2
-#define TX_BUF_2x8192          3
-
-/* Configuration Register 1 (DLCR7) */
-#define CONFIG_REG_1           7
-#define POWERUP                BIT(5)
-
-/* Transmit start register */
-#define TRANSMIT_START_REG     10
-#define TRANSMIT_START_RB      2
-#define TX_START               BIT(7)       /* Rest of register bit indicate*/
-                                            /* number of packets in tx buffer*/
-/* Node ID registers (DLCR8-13) */
-#define NODE_ID_0              8
-#define NODE_ID_RB             0
-
-/* Hash Table registers (HT8-15) */
-#define HASH_TABLE_0           8
-#define HASH_TABLE_RB          1
-
-/* Buffer memory ports */
-#define BUFFER_MEM_PORT_LB     8
-#define DATAPORT               BUFFER_MEM_PORT_LB
-#define BUFFER_MEM_PORT_HB     9
-
-/* 16 Collision control register (BMPR11) */
-#define COL_16_REG             11
-#define HALT_ON_16             0x00
-#define RETRANS_AND_HALT_ON_16 0x02
-
-/* Maximum number of attempts to send after 16 concecutive collisions */
-#define MAX_COL_16	       10
-
-/* DMA Burst and Transceiver Mode Register (BMPR13) */
-#define TRANSCEIVER_MODE_REG   13
-#define TRANSCEIVER_MODE_RB    2
-#define IO_BASE_UNLOCK	       BIT(7)
-#define LOWER_SQUELCH_TRESH    BIT(6)
-#define LINK_TEST_DISABLE      BIT(5)
-#define AUI_SELECT             BIT(4)
-#define DIS_AUTO_PORT_SEL      BIT(3)
-
-/* Filter Self Receive Register (BMPR14)  */
-#define FILTER_SELF_RX_REG     14
-#define SKIP_RX_PACKET         BIT(2)
-#define FILTER_SELF_RECEIVE    BIT(0)
-
-/* EEPROM Control Register (BMPR 16) */
-#define EEPROM_CTRL_REG        16
-
-/* EEPROM Data Register (BMPR 17) */
-#define EEPROM_DATA_REG        17
-
-/* NMC93CSx6 EEPROM Control Bits */
-#define CS_0                   0x00
-#define CS_1                   0x20
-#define SK_0                   0x00
-#define SK_1                   0x40
-#define DI_0                   0x00
-#define DI_1                   0x80
-
-/* NMC93CSx6 EEPROM Instructions */
-#define EEPROM_READ            0x80
-
-/* NMC93CSx6 EEPROM Addresses */
-#define E_NODEID_0             0x02
-#define E_NODEID_1             0x03
-#define E_NODEID_2             0x04
-#define E_PORT_SELECT          0x14
-  #define E_PORT_BNC           0x00
-  #define E_PORT_DIX           0x01
-  #define E_PORT_TP            0x02
-  #define E_PORT_AUTO          0x03
-  #define E_PORT_FROM_EPROM    0x04
-#define E_PRODUCT_CFG          0x30
-
-
-/* Macro to slow down io between EEPROM clock transitions */
-#define eeprom_slow_io() do { int _i = 40; while(--_i > 0) { inb(0x80); }}while(0)
-
-/* Jumperless Configuration Register (BMPR19) */
-#define JUMPERLESS_CONFIG      19
-
-/* ID ROM registers, writing to them also resets some parts of chip */
-#define ID_ROM_0               24
-#define ID_ROM_7               31
-#define RESET                  ID_ROM_0
-
-/* This is the I/O address list to be probed when seeking the card */
-static unsigned int eth16i_portlist[] __initdata = {
-	0x260, 0x280, 0x2A0, 0x240, 0x340, 0x320, 0x380, 0x300, 0
-};
-
-static unsigned int eth32i_portlist[] __initdata = {
-	0x1000, 0x2000, 0x3000, 0x4000, 0x5000, 0x6000, 0x7000, 0x8000,
-	0x9000, 0xA000, 0xB000, 0xC000, 0xD000, 0xE000, 0xF000, 0
-};
-
-/* This is the Interrupt lookup table for Eth16i card */
-static unsigned int eth16i_irqmap[] __initdata = { 9, 10, 5, 15, 0 };
-#define NUM_OF_ISA_IRQS    4
-
-/* This is the Interrupt lookup table for Eth32i card */
-static unsigned int eth32i_irqmap[] __initdata = { 3, 5, 7, 9, 10, 11, 12, 15, 0 };
-#define EISA_IRQ_REG	0xc89
-#define NUM_OF_EISA_IRQS   8
-
-static unsigned int eth16i_tx_buf_map[] = { 2048, 2048, 4096, 8192 };
-
-/* Use 0 for production, 1 for verification, >2 for debug */
-#ifndef ETH16I_DEBUG
-#define ETH16I_DEBUG 0
-#endif
-static unsigned int eth16i_debug = ETH16I_DEBUG;
-
-/* Information for each board */
-
-struct eth16i_local {
-	unsigned char     tx_started;
-	unsigned char     tx_buf_busy;
-	unsigned short    tx_queue;  /* Number of packets in transmit buffer */
-	unsigned short    tx_queue_len;
-	unsigned int      tx_buf_size;
-	unsigned long     open_time;
-	unsigned long     tx_buffered_packets;
-	unsigned long     tx_buffered_bytes;
-	unsigned long     col_16;
-	spinlock_t	  lock;
-};
-
-/* Function prototypes */
-
-static int     eth16i_probe1(struct net_device *dev, int ioaddr);
-static int     eth16i_check_signature(int ioaddr);
-static int     eth16i_probe_port(int ioaddr);
-static void    eth16i_set_port(int ioaddr, int porttype);
-static int     eth16i_send_probe_packet(int ioaddr, unsigned char *b, int l);
-static int     eth16i_receive_probe_packet(int ioaddr);
-static int     eth16i_get_irq(int ioaddr);
-static int     eth16i_read_eeprom(int ioaddr, int offset);
-static int     eth16i_read_eeprom_word(int ioaddr);
-static void    eth16i_eeprom_cmd(int ioaddr, unsigned char command);
-static int     eth16i_open(struct net_device *dev);
-static int     eth16i_close(struct net_device *dev);
-static netdev_tx_t eth16i_tx(struct sk_buff *skb, struct net_device *dev);
-static void    eth16i_rx(struct net_device *dev);
-static void    eth16i_timeout(struct net_device *dev);
-static irqreturn_t eth16i_interrupt(int irq, void *dev_id);
-static void    eth16i_reset(struct net_device *dev);
-static void    eth16i_timeout(struct net_device *dev);
-static void    eth16i_skip_packet(struct net_device *dev);
-static void    eth16i_multicast(struct net_device *dev);
-static void    eth16i_select_regbank(unsigned char regbank, int ioaddr);
-static void    eth16i_initialize(struct net_device *dev, int boot);
-
-#if 0
-static int     eth16i_set_irq(struct net_device *dev);
-#endif
-
-#ifdef MODULE
-static ushort  eth16i_parse_mediatype(const char* s);
-#endif
-
-static char cardname[] __initdata = "ICL EtherTeam 16i/32";
-
-static int __init do_eth16i_probe(struct net_device *dev)
-{
-	int i;
-	int ioaddr;
-	int base_addr = dev->base_addr;
-
-	if(eth16i_debug > 4)
-		printk(KERN_DEBUG "Probing started for %s\n", cardname);
-
-	if(base_addr > 0x1ff)           /* Check only single location */
-		return eth16i_probe1(dev, base_addr);
-	else if(base_addr != 0)         /* Don't probe at all */
-		return -ENXIO;
-
-	/* Seek card from the ISA io address space */
-	for(i = 0; (ioaddr = eth16i_portlist[i]) ; i++)
-		if(eth16i_probe1(dev, ioaddr) == 0)
-			return 0;
-
-	/* Seek card from the EISA io address space */
-	for(i = 0; (ioaddr = eth32i_portlist[i]) ; i++)
-		if(eth16i_probe1(dev, ioaddr) == 0)
-			return 0;
-
-	return -ENODEV;
-}
-
-#ifndef MODULE
-struct net_device * __init eth16i_probe(int unit)
-{
-	struct net_device *dev = alloc_etherdev(sizeof(struct eth16i_local));
-	int err;
-
-	if (!dev)
-		return ERR_PTR(-ENOMEM);
-
-	sprintf(dev->name, "eth%d", unit);
-	netdev_boot_setup_check(dev);
-
-	err = do_eth16i_probe(dev);
-	if (err)
-		goto out;
-	return dev;
-out:
-	free_netdev(dev);
-	return ERR_PTR(err);
-}
-#endif
-
-static const struct net_device_ops eth16i_netdev_ops = {
-	.ndo_open               = eth16i_open,
-	.ndo_stop               = eth16i_close,
-	.ndo_start_xmit    	= eth16i_tx,
-	.ndo_set_multicast_list = eth16i_multicast,
-	.ndo_tx_timeout 	= eth16i_timeout,
-	.ndo_change_mtu		= eth_change_mtu,
-	.ndo_set_mac_address 	= eth_mac_addr,
-	.ndo_validate_addr	= eth_validate_addr,
-};
-
-static int __init eth16i_probe1(struct net_device *dev, int ioaddr)
-{
-	struct eth16i_local *lp = netdev_priv(dev);
-	static unsigned version_printed;
-	int retval;
-
-	/* Let's grab the region */
-	if (!request_region(ioaddr, ETH16I_IO_EXTENT, cardname))
-		return -EBUSY;
-
-	/*
-	  The MB86985 chip has on register which holds information in which
-	  io address the chip lies. First read this register and compare
-	  it to our current io address and if match then this could
-	  be our chip.
-	  */
-
-	if(ioaddr < 0x1000) {
-		if(eth16i_portlist[(inb(ioaddr + JUMPERLESS_CONFIG) & 0x07)]
-		   != ioaddr) {
-			retval = -ENODEV;
-			goto out;
-		}
-	}
-
-	/* Now we will go a bit deeper and try to find the chip's signature */
-
-	if(eth16i_check_signature(ioaddr) != 0) {
-		retval = -ENODEV;
-		goto out;
-	}
-
-	/*
-	   Now it seems that we have found a ethernet chip in this particular
-	   ioaddr. The MB86985 chip has this feature, that when you read a
-	   certain register it will increase it's io base address to next
-	   configurable slot. Now when we have found the chip, first thing is
-	   to make sure that the chip's ioaddr will hold still here.
-	   */
-
-	eth16i_select_regbank(TRANSCEIVER_MODE_RB, ioaddr);
-	outb(0x00, ioaddr + TRANSCEIVER_MODE_REG);
-
-	outb(0x00, ioaddr + RESET);             /* Reset some parts of chip */
-	BITSET(ioaddr + CONFIG_REG_0, BIT(7));  /* Disable the data link */
-
-	if( (eth16i_debug & version_printed++) == 0)
-		printk(KERN_INFO "%s", version);
-
-	dev->base_addr = ioaddr;
-	dev->irq = eth16i_get_irq(ioaddr);
-
-	/* Try to obtain interrupt vector */
-
-	if ((retval = request_irq(dev->irq, (void *)&eth16i_interrupt, 0, cardname, dev))) {
-		printk(KERN_WARNING "%s at %#3x, but is unusable due to conflicting IRQ %d.\n",
-		       cardname, ioaddr, dev->irq);
-		goto out;
-	}
-
-	printk(KERN_INFO "%s: %s at %#3x, IRQ %d, ",
-	       dev->name, cardname, ioaddr, dev->irq);
-
-
-	/* Now we will have to lock the chip's io address */
-	eth16i_select_regbank(TRANSCEIVER_MODE_RB, ioaddr);
-	outb(0x38, ioaddr + TRANSCEIVER_MODE_REG);
-
-	eth16i_initialize(dev, 1); /* Initialize rest of the chip's registers */
-
-	/* Now let's same some energy by shutting down the chip ;) */
-	BITCLR(ioaddr + CONFIG_REG_1, POWERUP);
-
-	/* Initialize the device structure */
-	dev->netdev_ops         = &eth16i_netdev_ops;
-	dev->watchdog_timeo	= TX_TIMEOUT;
-	spin_lock_init(&lp->lock);
-
-	retval = register_netdev(dev);
-	if (retval)
-		goto out1;
-	return 0;
-out1:
-	free_irq(dev->irq, dev);
-out:
-	release_region(ioaddr, ETH16I_IO_EXTENT);
-	return retval;
-}
-
-
-static void eth16i_initialize(struct net_device *dev, int boot)
-{
-	int ioaddr = dev->base_addr;
-	int i, node_w = 0;
-	unsigned char node_byte = 0;
-
-	/* Setup station address */
-	eth16i_select_regbank(NODE_ID_RB, ioaddr);
-	for(i = 0 ; i < 3 ; i++) {
-		unsigned short node_val = eth16i_read_eeprom(ioaddr, E_NODEID_0 + i);
-		((unsigned short *)dev->dev_addr)[i] = ntohs(node_val);
-	}
-
-	for(i = 0; i < 6; i++) {
-		outb( ((unsigned char *)dev->dev_addr)[i], ioaddr + NODE_ID_0 + i);
-		if(boot) {
-			printk("%02x", inb(ioaddr + NODE_ID_0 + i));
-			if(i != 5)
-				printk(":");
-		}
-	}
-
-	/* Now we will set multicast addresses to accept none */
-	eth16i_select_regbank(HASH_TABLE_RB, ioaddr);
-	for(i = 0; i < 8; i++)
-		outb(0x00, ioaddr + HASH_TABLE_0 + i);
-
-	/*
-	  Now let's disable the transmitter and receiver, set the buffer ram
-	  cycle time, bus width and buffer data path width. Also we shall
-	  set transmit buffer size and total buffer size.
-	  */
-
-	eth16i_select_regbank(2, ioaddr);
-
-	node_byte = 0;
-	node_w = eth16i_read_eeprom(ioaddr, E_PRODUCT_CFG);
-
-	if( (node_w & 0xFF00) == 0x0800)
-		node_byte |= BUFFER_WIDTH_8;
-
-	node_byte |= SRAM_BS1;
-
-	if( (node_w & 0x00FF) == 64)
-		node_byte |= SRAM_BS0;
-
-	node_byte |= DLC_EN | SRAM_CYCLE_TIME_100NS | (ETH16I_TX_BUF_SIZE << 2);
-
-	outb(node_byte, ioaddr + CONFIG_REG_0);
-
-	/* We shall halt the transmitting, if 16 collisions are detected */
-	outb(HALT_ON_16, ioaddr + COL_16_REG);
-
-#ifdef MODULE
-	/* if_port already set by init_module() */
-#else
-	dev->if_port = (dev->mem_start < E_PORT_FROM_EPROM) ?
-		dev->mem_start : E_PORT_FROM_EPROM;
-#endif
-
-	/* Set interface port type */
-	if(boot) {
-		static const char * const porttype[] = {
-			"BNC", "DIX", "TP", "AUTO", "FROM_EPROM"
-		};
-
-		switch(dev->if_port)
-		{
-
-		case E_PORT_FROM_EPROM:
-			dev->if_port = eth16i_read_eeprom(ioaddr, E_PORT_SELECT);
-			break;
-
-		case E_PORT_AUTO:
-			dev->if_port = eth16i_probe_port(ioaddr);
-			break;
-
-		case E_PORT_BNC:
-		case E_PORT_TP:
-		case E_PORT_DIX:
-			break;
-		}
-
-		printk(" %s interface.\n", porttype[dev->if_port]);
-
-		eth16i_set_port(ioaddr, dev->if_port);
-	}
-
-	/* Set Receive Mode to normal operation */
-	outb(MODE_2, ioaddr + RECEIVE_MODE_REG);
-}
-
-static int eth16i_probe_port(int ioaddr)
-{
-	int i;
-	int retcode;
-	unsigned char dummy_packet[64];
-
-	/* Powerup the chip */
-	outb(0xc0 | POWERUP, ioaddr + CONFIG_REG_1);
-
-	BITSET(ioaddr + CONFIG_REG_0, DLC_EN);
-
-	eth16i_select_regbank(NODE_ID_RB, ioaddr);
-
-	for(i = 0; i < 6; i++) {
-		dummy_packet[i] = inb(ioaddr + NODE_ID_0 + i);
-		dummy_packet[i+6] = inb(ioaddr + NODE_ID_0 + i);
-	}
-
-	dummy_packet[12] = 0x00;
-	dummy_packet[13] = 0x04;
-	memset(dummy_packet + 14, 0, sizeof(dummy_packet) - 14);
-
-	eth16i_select_regbank(2, ioaddr);
-
-	for(i = 0; i < 3; i++) {
-		BITSET(ioaddr + CONFIG_REG_0, DLC_EN);
-		BITCLR(ioaddr + CONFIG_REG_0, DLC_EN);
-		eth16i_set_port(ioaddr, i);
-
-		if(eth16i_debug > 1)
-			printk(KERN_DEBUG "Set port number %d\n", i);
-
-		retcode = eth16i_send_probe_packet(ioaddr, dummy_packet, 64);
-		if(retcode == 0) {
-			retcode = eth16i_receive_probe_packet(ioaddr);
-			if(retcode != -1) {
-				if(eth16i_debug > 1)
-					printk(KERN_DEBUG "Eth16i interface port found at %d\n", i);
-				return i;
-			}
-		}
-		else {
-			if(eth16i_debug > 1)
-				printk(KERN_DEBUG "TRANSMIT_DONE timeout when probing interface port\n");
-		}
-	}
-
-	if( eth16i_debug > 1)
-		printk(KERN_DEBUG "Using default port\n");
-
-	return E_PORT_BNC;
-}
-
-static void eth16i_set_port(int ioaddr, int porttype)
-{
-	unsigned short temp = 0;
-
-	eth16i_select_regbank(TRANSCEIVER_MODE_RB, ioaddr);
-	outb(LOOPBACK_CONTROL, ioaddr + TRANSMIT_MODE_REG);
-
-	temp |= DIS_AUTO_PORT_SEL;
-
-	switch(porttype) {
-
-	case E_PORT_BNC :
-		temp |= AUI_SELECT;
-		break;
-
-	case E_PORT_TP :
-		break;
-
-	case E_PORT_DIX :
-		temp |= AUI_SELECT;
-		BITSET(ioaddr + TRANSMIT_MODE_REG, CONTROL_OUTPUT);
-		break;
-	}
-
-	outb(temp, ioaddr + TRANSCEIVER_MODE_REG);
-
-	if(eth16i_debug > 1) {
-		printk(KERN_DEBUG "TRANSMIT_MODE_REG = %x\n", inb(ioaddr + TRANSMIT_MODE_REG));
-		printk(KERN_DEBUG "TRANSCEIVER_MODE_REG = %x\n",
-		       inb(ioaddr+TRANSCEIVER_MODE_REG));
-	}
-}
-
-static int eth16i_send_probe_packet(int ioaddr, unsigned char *b, int l)
-{
-	unsigned long starttime;
-
-	outb(0xff, ioaddr + TX_STATUS_REG);
-
-	outw(l, ioaddr + DATAPORT);
-	outsw(ioaddr + DATAPORT, (unsigned short *)b, (l + 1) >> 1);
-
-	starttime = jiffies;
-	outb(TX_START | 1, ioaddr + TRANSMIT_START_REG);
-
-	while( (inb(ioaddr + TX_STATUS_REG) & 0x80) == 0) {
-		if( time_after(jiffies, starttime + TX_TIMEOUT)) {
-			return -1;
-		}
-	}
-
-	return 0;
-}
-
-static int eth16i_receive_probe_packet(int ioaddr)
-{
-	unsigned long starttime;
-
-	starttime = jiffies;
-
-	while((inb(ioaddr + TX_STATUS_REG) & 0x20) == 0) {
-		if( time_after(jiffies, starttime + TX_TIMEOUT)) {
-
-			if(eth16i_debug > 1)
-				printk(KERN_DEBUG "Timeout occurred waiting transmit packet received\n");
-			starttime = jiffies;
-			while((inb(ioaddr + RX_STATUS_REG) & 0x80) == 0) {
-				if( time_after(jiffies, starttime + TX_TIMEOUT)) {
-					if(eth16i_debug > 1)
-						printk(KERN_DEBUG "Timeout occurred waiting receive packet\n");
-					return -1;
-				}
-			}
-
-			if(eth16i_debug > 1)
-				printk(KERN_DEBUG "RECEIVE_PACKET\n");
-			return 0; /* Found receive packet */
-		}
-	}
-
-	if(eth16i_debug > 1) {
-		printk(KERN_DEBUG "TRANSMIT_PACKET_RECEIVED %x\n", inb(ioaddr + TX_STATUS_REG));
-		printk(KERN_DEBUG "RX_STATUS_REG = %x\n", inb(ioaddr + RX_STATUS_REG));
-	}
-
-	return 0; /* Return success */
-}
-
-#if 0
-static int eth16i_set_irq(struct net_device* dev)
-{
-	const int ioaddr = dev->base_addr;
-	const int irq = dev->irq;
-	int i = 0;
-
-	if(ioaddr < 0x1000) {
-		while(eth16i_irqmap[i] && eth16i_irqmap[i] != irq)
-			i++;
-
-		if(i < NUM_OF_ISA_IRQS) {
-			u8 cbyte = inb(ioaddr + JUMPERLESS_CONFIG);
-			cbyte = (cbyte & 0x3F) | (i << 6);
-			outb(cbyte, ioaddr + JUMPERLESS_CONFIG);
-			return 0;
-		}
-	}
-	else {
-		printk(KERN_NOTICE "%s: EISA Interrupt cannot be set. Use EISA Configuration utility.\n", dev->name);
-	}
-
-	return -1;
-
-}
-#endif
-
-static int __init eth16i_get_irq(int ioaddr)
-{
-	unsigned char cbyte;
-
-	if( ioaddr < 0x1000) {
-		cbyte = inb(ioaddr + JUMPERLESS_CONFIG);
-		return eth16i_irqmap[((cbyte & 0xC0) >> 6)];
-	} else {  /* Oh..the card is EISA so method getting IRQ different */
-		unsigned short index = 0;
-		cbyte = inb(ioaddr + EISA_IRQ_REG);
-		while( (cbyte & 0x01) == 0) {
-			cbyte = cbyte >> 1;
-			index++;
-		}
-		return eth32i_irqmap[index];
-	}
-}
-
-static int __init eth16i_check_signature(int ioaddr)
-{
-	int i;
-	unsigned char creg[4] = { 0 };
-
-	for(i = 0; i < 4 ; i++) {
-
-		creg[i] = inb(ioaddr + TRANSMIT_MODE_REG + i);
-
-		if(eth16i_debug > 1)
-			printk("eth16i: read signature byte %x at %x\n",
-			       creg[i],
-			       ioaddr + TRANSMIT_MODE_REG + i);
-	}
-
-	creg[0] &= 0x0F;      /* Mask collision cnr */
-	creg[2] &= 0x7F;      /* Mask DCLEN bit */
-
-#if 0
-	/*
-	   This was removed because the card was sometimes left to state
-	   from which it couldn't be find anymore. If there is need
-	   to more strict check still this have to be fixed.
-	   */
-	if( ! ((creg[0] == 0x06) && (creg[1] == 0x41)) ) {
-		if(creg[1] != 0x42)
-			return -1;
-	}
-#endif
-
-	if( !((creg[2] == 0x36) && (creg[3] == 0xE0)) ) {
-		creg[2] &= 0x40;
-		creg[3] &= 0x03;
-
-		if( !((creg[2] == 0x40) && (creg[3] == 0x00)) )
-			return -1;
-	}
-
-	if(eth16i_read_eeprom(ioaddr, E_NODEID_0) != 0)
-		return -1;
-
-	if((eth16i_read_eeprom(ioaddr, E_NODEID_1) & 0xFF00) != 0x4B00)
-		return -1;
-
-	return 0;
-}
-
-static int eth16i_read_eeprom(int ioaddr, int offset)
-{
-	int data = 0;
-
-	eth16i_eeprom_cmd(ioaddr, EEPROM_READ | offset);
-	outb(CS_1, ioaddr + EEPROM_CTRL_REG);
-	data = eth16i_read_eeprom_word(ioaddr);
-	outb(CS_0 | SK_0, ioaddr + EEPROM_CTRL_REG);
-
-	return data;
-}
-
-static int eth16i_read_eeprom_word(int ioaddr)
-{
-	int i;
-	int data = 0;
-
-	for(i = 16; i > 0; i--) {
-		outb(CS_1 | SK_0, ioaddr + EEPROM_CTRL_REG);
-		eeprom_slow_io();
-		outb(CS_1 | SK_1, ioaddr + EEPROM_CTRL_REG);
-		eeprom_slow_io();
-		data = (data << 1) |
-			((inb(ioaddr + EEPROM_DATA_REG) & DI_1) ? 1 : 0);
-
-		eeprom_slow_io();
-	}
-
-	return data;
-}
-
-static void eth16i_eeprom_cmd(int ioaddr, unsigned char command)
-{
-	int i;
-
-	outb(CS_0 | SK_0, ioaddr + EEPROM_CTRL_REG);
-	outb(DI_0, ioaddr + EEPROM_DATA_REG);
-	outb(CS_1 | SK_0, ioaddr + EEPROM_CTRL_REG);
-	outb(DI_1, ioaddr + EEPROM_DATA_REG);
-	outb(CS_1 | SK_1, ioaddr + EEPROM_CTRL_REG);
-
-	for(i = 7; i >= 0; i--) {
-		short cmd = ( (command & (1 << i)) ? DI_1 : DI_0 );
-		outb(cmd, ioaddr + EEPROM_DATA_REG);
-		outb(CS_1 | SK_0, ioaddr + EEPROM_CTRL_REG);
-		eeprom_slow_io();
-		outb(CS_1 | SK_1, ioaddr + EEPROM_CTRL_REG);
-		eeprom_slow_io();
-	}
-}
-
-static int eth16i_open(struct net_device *dev)
-{
-	struct eth16i_local *lp = netdev_priv(dev);
-	int ioaddr = dev->base_addr;
-
-	/* Powerup the chip */
-	outb(0xc0 | POWERUP, ioaddr + CONFIG_REG_1);
-
-	/* Initialize the chip */
-	eth16i_initialize(dev, 0);
-
-	/* Set the transmit buffer size */
-	lp->tx_buf_size = eth16i_tx_buf_map[ETH16I_TX_BUF_SIZE & 0x03];
-
-	if(eth16i_debug > 0)
-		printk(KERN_DEBUG "%s: transmit buffer size %d\n",
-		       dev->name, lp->tx_buf_size);
-
-	/* Now enable Transmitter and Receiver sections */
-	BITCLR(ioaddr + CONFIG_REG_0, DLC_EN);
-
-	/* Now switch to register bank 2, for run time operation */
-	eth16i_select_regbank(2, ioaddr);
-
-	lp->open_time = jiffies;
-	lp->tx_started = 0;
-	lp->tx_queue = 0;
-	lp->tx_queue_len = 0;
-
-	/* Turn on interrupts*/
-	outw(ETH16I_INTR_ON, ioaddr + TX_INTR_REG);
-
-	netif_start_queue(dev);
-	return 0;
-}
-
-static int eth16i_close(struct net_device *dev)
-{
-	struct eth16i_local *lp = netdev_priv(dev);
-	int ioaddr = dev->base_addr;
-
-	eth16i_reset(dev);
-
-	/* Turn off interrupts*/
-	outw(ETH16I_INTR_OFF, ioaddr + TX_INTR_REG);
-
-	netif_stop_queue(dev);
-
-	lp->open_time = 0;
-
-	/* Disable transmit and receive */
-	BITSET(ioaddr + CONFIG_REG_0, DLC_EN);
-
-	/* Reset the chip */
-	/* outb(0xff, ioaddr + RESET); */
-	/* outw(0xffff, ioaddr + TX_STATUS_REG);    */
-
-	outb(0x00, ioaddr + CONFIG_REG_1);
-
-	return 0;
-}
-
-static void eth16i_timeout(struct net_device *dev)
-{
-	struct eth16i_local *lp = netdev_priv(dev);
-	int ioaddr = dev->base_addr;
-	/*
-	   If we get here, some higher level has decided that
-	   we are broken. There should really be a "kick me"
-	   function call instead.
-	   */
-
-	outw(ETH16I_INTR_OFF, ioaddr + TX_INTR_REG);
-	printk(KERN_WARNING "%s: transmit timed out with status %04x, %s ?\n",
-	       dev->name,
-	inw(ioaddr + TX_STATUS_REG),  (inb(ioaddr + TX_STATUS_REG) & TX_DONE) ?
-		       "IRQ conflict" : "network cable problem");
-
-	dev->trans_start = jiffies; /* prevent tx timeout */
-
-	/* Let's dump all registers */
-	if(eth16i_debug > 0) {
-		printk(KERN_DEBUG "%s: timeout: %02x %02x %02x %02x %02x %02x %02x %02x.\n",
-		       dev->name, inb(ioaddr + 0),
-		       inb(ioaddr + 1), inb(ioaddr + 2),
-		       inb(ioaddr + 3), inb(ioaddr + 4),
-		       inb(ioaddr + 5),
-		       inb(ioaddr + 6), inb(ioaddr + 7));
-
-		printk(KERN_DEBUG "%s: transmit start reg: %02x. collision reg %02x\n",
-		       dev->name, inb(ioaddr + TRANSMIT_START_REG),
-		       inb(ioaddr + COL_16_REG));
-			printk(KERN_DEBUG "lp->tx_queue = %d\n", lp->tx_queue);
-		printk(KERN_DEBUG "lp->tx_queue_len = %d\n", lp->tx_queue_len);
-		printk(KERN_DEBUG "lp->tx_started = %d\n", lp->tx_started);
-	}
-	dev->stats.tx_errors++;
-	eth16i_reset(dev);
-	dev->trans_start = jiffies; /* prevent tx timeout */
-	outw(ETH16I_INTR_ON, ioaddr + TX_INTR_REG);
-	netif_wake_queue(dev);
-}
-
-static netdev_tx_t eth16i_tx(struct sk_buff *skb, struct net_device *dev)
-{
-	struct eth16i_local *lp = netdev_priv(dev);
-	int ioaddr = dev->base_addr;
-	int status = 0;
-	ushort length = skb->len;
-	unsigned char *buf;
-	unsigned long flags;
-
-	if (length < ETH_ZLEN) {
-		if (skb_padto(skb, ETH_ZLEN))
-			return NETDEV_TX_OK;
-		length = ETH_ZLEN;
-	}
-	buf = skb->data;
-
-	netif_stop_queue(dev);
-
-	/* Turn off TX interrupts */
-	outw(ETH16I_INTR_OFF, ioaddr + TX_INTR_REG);
-
-	/* We would be better doing the disable_irq tricks the 3c509 does,
-	   that would make this suck a lot less */
-
-	spin_lock_irqsave(&lp->lock, flags);
-
-	if( (length + 2) > (lp->tx_buf_size - lp->tx_queue_len)) {
-		if(eth16i_debug > 0)
-			printk(KERN_WARNING "%s: Transmit buffer full.\n", dev->name);
-	}
-	else {
-		outw(length, ioaddr + DATAPORT);
-
-		if( ioaddr < 0x1000 )
-			outsw(ioaddr + DATAPORT, buf, (length + 1) >> 1);
-		else {
-			unsigned char frag = length % 4;
-			outsl(ioaddr + DATAPORT, buf, length >> 2);
-			if( frag != 0 ) {
-				outsw(ioaddr + DATAPORT, (buf + (length & 0xFFFC)), 1);
-				if( frag == 3 )
-					outsw(ioaddr + DATAPORT,
-					      (buf + (length & 0xFFFC) + 2), 1);
-			}
-		}
-		lp->tx_buffered_packets++;
-		lp->tx_buffered_bytes = length;
-		lp->tx_queue++;
-		lp->tx_queue_len += length + 2;
-	}
-	lp->tx_buf_busy = 0;
-
-	if(lp->tx_started == 0) {
-		/* If the transmitter is idle..always trigger a transmit */
-		outb(TX_START | lp->tx_queue, ioaddr + TRANSMIT_START_REG);
-		lp->tx_queue = 0;
-		lp->tx_queue_len = 0;
-		lp->tx_started = 1;
-		netif_wake_queue(dev);
-	}
-	else if(lp->tx_queue_len < lp->tx_buf_size - (ETH_FRAME_LEN + 2)) {
-		/* There is still more room for one more packet in tx buffer */
-		netif_wake_queue(dev);
-	}
-
-	spin_unlock_irqrestore(&lp->lock, flags);
-
-	outw(ETH16I_INTR_ON, ioaddr + TX_INTR_REG);
-	/* Turn TX interrupts back on */
-	/* outb(TX_INTR_DONE | TX_INTR_16_COL, ioaddr + TX_INTR_REG); */
-	status = 0;
-	dev_kfree_skb(skb);
-	return NETDEV_TX_OK;
-}
-
-static void eth16i_rx(struct net_device *dev)
-{
-	int ioaddr = dev->base_addr;
-	int boguscount = MAX_RX_LOOP;
-
-	/* Loop until all packets have been read */
-	while( (inb(ioaddr + RECEIVE_MODE_REG) & RX_BUFFER_EMPTY) == 0) {
-
-		/* Read status byte from receive buffer */
-		ushort status = inw(ioaddr + DATAPORT);
-
-		/* Get the size of the packet from receive buffer */
-		ushort pkt_len = inw(ioaddr + DATAPORT);
-
-		if(eth16i_debug > 4)
-			printk(KERN_DEBUG "%s: Receiving packet mode %02x status %04x.\n",
-			       dev->name,
-			       inb(ioaddr + RECEIVE_MODE_REG), status);
-
-		if( !(status & PKT_GOOD) ) {
-			dev->stats.rx_errors++;
-
-			if( (pkt_len < ETH_ZLEN) || (pkt_len > ETH_FRAME_LEN) ) {
-				dev->stats.rx_length_errors++;
-				eth16i_reset(dev);
-				return;
-			}
-			else {
-				eth16i_skip_packet(dev);
-				dev->stats.rx_dropped++;
-			}
-		}
-		else {   /* Ok so now we should have a good packet */
-			struct sk_buff *skb;
-
-			skb = dev_alloc_skb(pkt_len + 3);
-			if( skb == NULL ) {
-				printk(KERN_WARNING "%s: Could'n allocate memory for packet (len %d)\n",
-				       dev->name, pkt_len);
-				eth16i_skip_packet(dev);
-				dev->stats.rx_dropped++;
-				break;
-			}
-
-			skb_reserve(skb,2);
-
-			/*
-			   Now let's get the packet out of buffer.
-			   size is (pkt_len + 1) >> 1, cause we are now reading words
-			   and it have to be even aligned.
-			   */
-
-			if(ioaddr < 0x1000)
-				insw(ioaddr + DATAPORT, skb_put(skb, pkt_len),
-				     (pkt_len + 1) >> 1);
-			else {
-				unsigned char *buf = skb_put(skb, pkt_len);
-				unsigned char frag = pkt_len % 4;
-
-				insl(ioaddr + DATAPORT, buf, pkt_len >> 2);
-
-				if(frag != 0) {
-					unsigned short rest[2];
-					rest[0] = inw( ioaddr + DATAPORT );
-					if(frag == 3)
-						rest[1] = inw( ioaddr + DATAPORT );
-
-					memcpy(buf + (pkt_len & 0xfffc), (char *)rest, frag);
-				}
-			}
-
-			skb->protocol=eth_type_trans(skb, dev);
-
-			if( eth16i_debug > 5 ) {
-				int i;
-				printk(KERN_DEBUG "%s: Received packet of length %d.\n",
-				       dev->name, pkt_len);
-				for(i = 0; i < 14; i++)
-					printk(KERN_DEBUG " %02x", skb->data[i]);
-				printk(KERN_DEBUG ".\n");
-			}
-			netif_rx(skb);
-			dev->stats.rx_packets++;
-			dev->stats.rx_bytes += pkt_len;
-
-		} /* else */
-
-		if(--boguscount <= 0)
-			break;
-
-	} /* while */
-}
-
-static irqreturn_t eth16i_interrupt(int irq, void *dev_id)
-{
-	struct net_device *dev = dev_id;
-	struct eth16i_local *lp;
-	int ioaddr = 0, status;
-	int handled = 0;
-
-	ioaddr = dev->base_addr;
-	lp = netdev_priv(dev);
-
-	/* Turn off all interrupts from adapter */
-	outw(ETH16I_INTR_OFF, ioaddr + TX_INTR_REG);
-
-	/* eth16i_tx won't be called */
-	spin_lock(&lp->lock);
-
-	status = inw(ioaddr + TX_STATUS_REG);      /* Get the status */
-	outw(status, ioaddr + TX_STATUS_REG);      /* Clear status bits */
-
-	if (status)
-		handled = 1;
-
-	if(eth16i_debug > 3)
-		printk(KERN_DEBUG "%s: Interrupt with status %04x.\n", dev->name, status);
-
-	if( status & 0x7f00 ) {
-
-		dev->stats.rx_errors++;
-
-		if(status & (BUS_RD_ERR << 8) )
-			printk(KERN_WARNING "%s: Bus read error.\n",dev->name);
-		if(status & (SHORT_PKT_ERR << 8) )   dev->stats.rx_length_errors++;
-		if(status & (ALIGN_ERR << 8) )       dev->stats.rx_frame_errors++;
-		if(status & (CRC_ERR << 8) )	    dev->stats.rx_crc_errors++;
-		if(status & (RX_BUF_OVERFLOW << 8) ) dev->stats.rx_over_errors++;
-	}
-	if( status & 0x001a) {
-
-		dev->stats.tx_errors++;
-
-		if(status & CR_LOST) dev->stats.tx_carrier_errors++;
-		if(status & TX_JABBER_ERR) dev->stats.tx_window_errors++;
-
-#if 0
-		if(status & COLLISION) {
-			dev->stats.collisions +=
-				((inb(ioaddr+TRANSMIT_MODE_REG) & 0xF0) >> 4);
-		}
-#endif
-		if(status & COLLISIONS_16) {
-			if(lp->col_16 < MAX_COL_16) {
-				lp->col_16++;
-				dev->stats.collisions++;
-				/* Resume transmitting, skip failed packet */
-				outb(0x02, ioaddr + COL_16_REG);
-			}
-			else {
-				printk(KERN_WARNING "%s: bailing out due to many consecutive 16-in-a-row collisions. Network cable problem?\n", dev->name);
-			}
-		}
-	}
-
-	if( status & 0x00ff ) {          /* Let's check the transmit status reg */
-
-		if(status & TX_DONE) {         /* The transmit has been done */
-			dev->stats.tx_packets = lp->tx_buffered_packets;
-			dev->stats.tx_bytes += lp->tx_buffered_bytes;
-			lp->col_16 = 0;
-
-			if(lp->tx_queue) {           /* Is there still packets ? */
-				/* There was packet(s) so start transmitting and write also
-				   how many packets there is to be sended */
-				outb(TX_START | lp->tx_queue, ioaddr + TRANSMIT_START_REG);
-				lp->tx_queue = 0;
-				lp->tx_queue_len = 0;
-				lp->tx_started = 1;
-			}
-			else {
-				lp->tx_started = 0;
-			}
-			netif_wake_queue(dev);
-		}
-	}
-
-	if( ( status & 0x8000 ) ||
-	    ( (inb(ioaddr + RECEIVE_MODE_REG) & RX_BUFFER_EMPTY) == 0) ) {
-		eth16i_rx(dev);  /* We have packet in receive buffer */
-	}
-
-	/* Turn interrupts back on */
-	outw(ETH16I_INTR_ON, ioaddr + TX_INTR_REG);
-
-	if(lp->tx_queue_len < lp->tx_buf_size - (ETH_FRAME_LEN + 2)) {
-		/* There is still more room for one more packet in tx buffer */
-		netif_wake_queue(dev);
-	}
-
-	spin_unlock(&lp->lock);
-
-	return IRQ_RETVAL(handled);
-}
-
-static void eth16i_skip_packet(struct net_device *dev)
-{
-	int ioaddr = dev->base_addr;
-
-	inw(ioaddr + DATAPORT);
-	inw(ioaddr + DATAPORT);
-	inw(ioaddr + DATAPORT);
-
-	outb(SKIP_RX_PACKET, ioaddr + FILTER_SELF_RX_REG);
-	while( inb( ioaddr + FILTER_SELF_RX_REG ) != 0);
-}
-
-static void eth16i_reset(struct net_device *dev)
-{
-	struct eth16i_local *lp = netdev_priv(dev);
-	int ioaddr = dev->base_addr;
-
-	if(eth16i_debug > 1)
-		printk(KERN_DEBUG "%s: Resetting device.\n", dev->name);
-
-	BITSET(ioaddr + CONFIG_REG_0, DLC_EN);
-	outw(0xffff, ioaddr + TX_STATUS_REG);
-	eth16i_select_regbank(2, ioaddr);
-
-	lp->tx_started = 0;
-	lp->tx_buf_busy = 0;
-	lp->tx_queue = 0;
-	lp->tx_queue_len = 0;
-	BITCLR(ioaddr + CONFIG_REG_0, DLC_EN);
-}
-
-static void eth16i_multicast(struct net_device *dev)
-{
-	int ioaddr = dev->base_addr;
-
-	if (!netdev_mc_empty(dev) || dev->flags&(IFF_ALLMULTI|IFF_PROMISC))
-	{
-		outb(3, ioaddr + RECEIVE_MODE_REG);
-	} else {
-		outb(2, ioaddr + RECEIVE_MODE_REG);
-	}
-}
-
-static void eth16i_select_regbank(unsigned char banknbr, int ioaddr)
-{
-	unsigned char data;
-
-	data = inb(ioaddr + CONFIG_REG_1);
-	outb( ((data & 0xF3) | ( (banknbr & 0x03) << 2)), ioaddr + CONFIG_REG_1);
-}
-
-#ifdef MODULE
-
-static ushort eth16i_parse_mediatype(const char* s)
-{
-	if(!s)
-		return E_PORT_FROM_EPROM;
-
-        if (!strncmp(s, "bnc", 3))
-		return E_PORT_BNC;
-        else if (!strncmp(s, "tp", 2))
-                return E_PORT_TP;
-        else if (!strncmp(s, "dix", 3))
-                return E_PORT_DIX;
-        else if (!strncmp(s, "auto", 4))
-		return E_PORT_AUTO;
-	else
-		return E_PORT_FROM_EPROM;
-}
-
-#define MAX_ETH16I_CARDS 4  /* Max number of Eth16i cards per module */
-
-static struct net_device *dev_eth16i[MAX_ETH16I_CARDS];
-static int io[MAX_ETH16I_CARDS];
-#if 0
-static int irq[MAX_ETH16I_CARDS];
-#endif
-static char* mediatype[MAX_ETH16I_CARDS];
-static int debug = -1;
-
-MODULE_AUTHOR("Mika Kuoppala <miku@iki.fi>");
-MODULE_DESCRIPTION("ICL EtherTeam 16i/32 driver");
-MODULE_LICENSE("GPL");
-
-
-module_param_array(io, int, NULL, 0);
-MODULE_PARM_DESC(io, "eth16i I/O base address(es)");
-
-#if 0
-module_param_array(irq, int, NULL, 0);
-MODULE_PARM_DESC(irq, "eth16i interrupt request number");
-#endif
-
-module_param_array(mediatype, charp, NULL, 0);
-MODULE_PARM_DESC(mediatype, "eth16i media type of interface(s) (bnc,tp,dix,auto,eprom)");
-
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug, "eth16i debug level (0-6)");
-
-int __init init_module(void)
-{
-	int this_dev, found = 0;
-	struct net_device *dev;
-
-	for (this_dev = 0; this_dev < MAX_ETH16I_CARDS; this_dev++) {
-		dev = alloc_etherdev(sizeof(struct eth16i_local));
-		if (!dev)
-			break;
-
-		dev->base_addr = io[this_dev];
-
-	        if(debug != -1)
-			eth16i_debug = debug;
-
-		if(eth16i_debug > 1)
-			printk(KERN_NOTICE "eth16i(%d): interface type %s\n", this_dev, mediatype[this_dev] ? mediatype[this_dev] : "none" );
-
-		dev->if_port = eth16i_parse_mediatype(mediatype[this_dev]);
-
-		if(io[this_dev] == 0) {
-			if (this_dev != 0) { /* Only autoprobe 1st one */
-				free_netdev(dev);
-				break;
-			}
-
-			printk(KERN_NOTICE "eth16i.c: Presently autoprobing (not recommended) for a single card.\n");
-		}
-
-		if (do_eth16i_probe(dev) == 0) {
-			dev_eth16i[found++] = dev;
-			continue;
-		}
-		printk(KERN_WARNING "eth16i.c No Eth16i card found (i/o = 0x%x).\n",
-		       io[this_dev]);
-		free_netdev(dev);
-		break;
-	}
-	if (found)
-		return 0;
-	return -ENXIO;
-}
-
-void __exit cleanup_module(void)
-{
-	int this_dev;
-
-	for(this_dev = 0; this_dev < MAX_ETH16I_CARDS; this_dev++) {
-		struct net_device *dev = dev_eth16i[this_dev];
-
-		if (netdev_priv(dev)) {
-			unregister_netdev(dev);
-			free_irq(dev->irq, dev);
-			release_region(dev->base_addr, ETH16I_IO_EXTENT);
-			free_netdev(dev);
-		}
-	}
-}
-#endif /* MODULE */