8390: Move the 8390 related drivers

Moves the drivers for the National Semi-conductor 8390 chipset into
drivers/net/ethernet/8390/ and the necessary Kconfig and Makefile
changes.

CC: Donald Becker <becker@scyld.com>
CC: Paul Gortmaker <paul.gortmaker@windriver.com>
CC: Alain Malek <alain.malek@cryogen.com>
CC: Peter De Schrijver <p2@mind.be>
CC: "David Huggins-Daines" <dhd@debian.org>
CC: Wim Dumon <wimpie@kotnet.org>
CC: Yoshinori Sato <ysato@users.sourceforge.jp>
CC: David Hinds <dahinds@users.sourceforge.net>
CC: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 506 insertions, 0 deletions

diff --git a/drivers/net/ethernet/8390/hp-plus.c b/drivers/net/ethernet/8390/hp-plus.c
new file mode 100644
index 00000000000..29917363ebf
--- /dev/null
+++ b/drivers/net/ethernet/8390/hp-plus.c
@@ -0,0 +1,506 @@
+/* hp-plus.c: A HP PCLAN/plus ethernet driver for linux. */
+/*
+	Written 1994 by Donald Becker.
+
+	This driver is for the Hewlett Packard PC LAN (27***) plus ethercards.
+	These cards are sold under several model numbers, usually 2724*.
+
+	This software may be used and distributed according to the terms
+	of the GNU General Public License, incorporated herein by reference.
+
+	The author may be reached as becker@scyld.com, or C/O
+	Scyld Computing Corporation
+	410 Severn Ave., Suite 210
+	Annapolis MD 21403
+
+	As is often the case, a great deal of credit is owed to Russ Nelson.
+	The Crynwr packet driver was my primary source of HP-specific
+	programming information.
+*/
+
+static const char version[] =
+"hp-plus.c:v1.10 9/24/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
+
+#include <linux/module.h>
+
+#include <linux/string.h>		/* Important -- this inlines word moves. */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+
+#include "8390.h"
+
+#define DRV_NAME "hp-plus"
+
+/* A zero-terminated list of I/O addresses to be probed. */
+static unsigned int hpplus_portlist[] __initdata =
+{0x200, 0x240, 0x280, 0x2C0, 0x300, 0x320, 0x340, 0};
+
+/*
+   The HP EtherTwist chip implementation is a fairly routine DP8390
+   implementation.  It allows both shared memory and programmed-I/O buffer
+   access, using a custom interface for both.  The programmed-I/O mode is
+   entirely implemented in the HP EtherTwist chip, bypassing the problem
+   ridden built-in 8390 facilities used on NE2000 designs.  The shared
+   memory mode is likewise special, with an offset register used to make
+   packets appear at the shared memory base.  Both modes use a base and bounds
+   page register to hide the Rx ring buffer wrap -- a packet that spans the
+   end of physical buffer memory appears continuous to the driver. (c.f. the
+   3c503 and Cabletron E2100)
+
+   A special note: the internal buffer of the board is only 8 bits wide.
+   This lays several nasty traps for the unaware:
+   - the 8390 must be programmed for byte-wide operations
+   - all I/O and memory operations must work on whole words (the access
+     latches are serially preloaded and have no byte-swapping ability).
+
+   This board is laid out in I/O space much like the earlier HP boards:
+   the first 16 locations are for the board registers, and the second 16 are
+   for the 8390.  The board is easy to identify, with both a dedicated 16 bit
+   ID register and a constant 0x530* value in the upper bits of the paging
+   register.
+*/
+
+#define HP_ID			0x00	/* ID register, always 0x4850. */
+#define HP_PAGING		0x02	/* Registers visible @ 8-f, see PageName. */
+#define HPP_OPTION		0x04	/* Bitmapped options, see HP_Option.	*/
+#define HPP_OUT_ADDR	0x08	/* I/O output location in Perf_Page.	*/
+#define HPP_IN_ADDR		0x0A	/* I/O input location in Perf_Page.		*/
+#define HP_DATAPORT		0x0c	/* I/O data transfer in Perf_Page.		*/
+#define NIC_OFFSET		0x10	/* Offset to the 8390 registers.		*/
+#define HP_IO_EXTENT	32
+
+#define HP_START_PG		0x00	/* First page of TX buffer */
+#define HP_STOP_PG		0x80	/* Last page +1 of RX ring */
+
+/* The register set selected in HP_PAGING. */
+enum PageName {
+	Perf_Page = 0,				/* Normal operation. */
+	MAC_Page = 1,				/* The ethernet address (+checksum). */
+	HW_Page = 2,				/* EEPROM-loaded hardware parameters. */
+	LAN_Page = 4,				/* Transceiver selection, testing, etc. */
+	ID_Page = 6 };
+
+/* The bit definitions for the HPP_OPTION register. */
+enum HP_Option {
+	NICReset = 1, ChipReset = 2, 	/* Active low, really UNreset. */
+	EnableIRQ = 4, FakeIntr = 8, BootROMEnb = 0x10, IOEnb = 0x20,
+	MemEnable = 0x40, ZeroWait = 0x80, MemDisable = 0x1000, };
+
+static int hpp_probe1(struct net_device *dev, int ioaddr);
+
+static void hpp_reset_8390(struct net_device *dev);
+static int hpp_open(struct net_device *dev);
+static int hpp_close(struct net_device *dev);
+static void hpp_mem_block_input(struct net_device *dev, int count,
+						  struct sk_buff *skb, int ring_offset);
+static void hpp_mem_block_output(struct net_device *dev, int count,
+							const unsigned char *buf, int start_page);
+static void hpp_mem_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
+						  int ring_page);
+static void hpp_io_block_input(struct net_device *dev, int count,
+						  struct sk_buff *skb, int ring_offset);
+static void hpp_io_block_output(struct net_device *dev, int count,
+							const unsigned char *buf, int start_page);
+static void hpp_io_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
+						  int ring_page);
+
+
+/*	Probe a list of addresses for an HP LAN+ adaptor.
+	This routine is almost boilerplate. */
+
+static int __init do_hpp_probe(struct net_device *dev)
+{
+	int i;
+	int base_addr = dev->base_addr;
+	int irq = dev->irq;
+
+	if (base_addr > 0x1ff)		/* Check a single specified location. */
+		return hpp_probe1(dev, base_addr);
+	else if (base_addr != 0)	/* Don't probe at all. */
+		return -ENXIO;
+
+	for (i = 0; hpplus_portlist[i]; i++) {
+		if (hpp_probe1(dev, hpplus_portlist[i]) == 0)
+			return 0;
+		dev->irq = irq;
+	}
+
+	return -ENODEV;
+}
+
+#ifndef MODULE
+struct net_device * __init hp_plus_probe(int unit)
+{
+	struct net_device *dev = alloc_eip_netdev();
+	int err;
+
+	if (!dev)
+		return ERR_PTR(-ENOMEM);
+
+	sprintf(dev->name, "eth%d", unit);
+	netdev_boot_setup_check(dev);
+
+	err = do_hpp_probe(dev);
+	if (err)
+		goto out;
+	return dev;
+out:
+	free_netdev(dev);
+	return ERR_PTR(err);
+}
+#endif
+
+static const struct net_device_ops hpp_netdev_ops = {
+	.ndo_open		= hpp_open,
+	.ndo_stop		= hpp_close,
+	.ndo_start_xmit		= eip_start_xmit,
+	.ndo_tx_timeout		= eip_tx_timeout,
+	.ndo_get_stats		= eip_get_stats,
+	.ndo_set_multicast_list = eip_set_multicast_list,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= eip_poll,
+#endif
+};
+
+
+/* Do the interesting part of the probe at a single address. */
+static int __init hpp_probe1(struct net_device *dev, int ioaddr)
+{
+	int i, retval;
+	unsigned char checksum = 0;
+	const char name[] = "HP-PC-LAN+";
+	int mem_start;
+	static unsigned version_printed;
+
+	if (!request_region(ioaddr, HP_IO_EXTENT, DRV_NAME))
+		return -EBUSY;
+
+	/* Check for the HP+ signature, 50 48 0x 53. */
+	if (inw(ioaddr + HP_ID) != 0x4850 ||
+	    (inw(ioaddr + HP_PAGING) & 0xfff0) != 0x5300) {
+		retval = -ENODEV;
+		goto out;
+	}
+
+	if (ei_debug  &&  version_printed++ == 0)
+		printk(version);
+
+	printk("%s: %s at %#3x, ", dev->name, name, ioaddr);
+
+	/* Retrieve and checksum the station address. */
+	outw(MAC_Page, ioaddr + HP_PAGING);
+
+	for(i = 0; i < ETHER_ADDR_LEN; i++) {
+		unsigned char inval = inb(ioaddr + 8 + i);
+		dev->dev_addr[i] = inval;
+		checksum += inval;
+	}
+	checksum += inb(ioaddr + 14);
+
+	printk("%pM", dev->dev_addr);
+
+	if (checksum != 0xff) {
+		printk(" bad checksum %2.2x.\n", checksum);
+		retval = -ENODEV;
+		goto out;
+	} else {
+		/* Point at the Software Configuration Flags. */
+		outw(ID_Page, ioaddr + HP_PAGING);
+		printk(" ID %4.4x", inw(ioaddr + 12));
+	}
+
+	/* Read the IRQ line. */
+	outw(HW_Page, ioaddr + HP_PAGING);
+	{
+		int irq = inb(ioaddr + 13) & 0x0f;
+		int option = inw(ioaddr + HPP_OPTION);
+
+		dev->irq = irq;
+		if (option & MemEnable) {
+			mem_start = inw(ioaddr + 9) << 8;
+			printk(", IRQ %d, memory address %#x.\n", irq, mem_start);
+		} else {
+			mem_start = 0;
+			printk(", IRQ %d, programmed-I/O mode.\n", irq);
+		}
+	}
+
+	/* Set the wrap registers for string I/O reads.   */
+	outw((HP_START_PG + TX_PAGES/2) | ((HP_STOP_PG - 1) << 8), ioaddr + 14);
+
+	/* Set the base address to point to the NIC, not the "real" base! */
+	dev->base_addr = ioaddr + NIC_OFFSET;
+
+	dev->netdev_ops = &hpp_netdev_ops;
+
+	ei_status.name = name;
+	ei_status.word16 = 0;		/* Agggghhhhh! Debug time: 2 days! */
+	ei_status.tx_start_page = HP_START_PG;
+	ei_status.rx_start_page = HP_START_PG + TX_PAGES/2;
+	ei_status.stop_page = HP_STOP_PG;
+
+	ei_status.reset_8390 = &hpp_reset_8390;
+	ei_status.block_input = &hpp_io_block_input;
+	ei_status.block_output = &hpp_io_block_output;
+	ei_status.get_8390_hdr = &hpp_io_get_8390_hdr;
+
+	/* Check if the memory_enable flag is set in the option register. */
+	if (mem_start) {
+		ei_status.block_input = &hpp_mem_block_input;
+		ei_status.block_output = &hpp_mem_block_output;
+		ei_status.get_8390_hdr = &hpp_mem_get_8390_hdr;
+		dev->mem_start = mem_start;
+		ei_status.mem = ioremap(mem_start,
+					(HP_STOP_PG - HP_START_PG)*256);
+		if (!ei_status.mem) {
+			retval = -ENOMEM;
+			goto out;
+		}
+		ei_status.rmem_start = dev->mem_start + TX_PAGES/2*256;
+		dev->mem_end = ei_status.rmem_end
+			= dev->mem_start + (HP_STOP_PG - HP_START_PG)*256;
+	}
+
+	outw(Perf_Page, ioaddr + HP_PAGING);
+	NS8390p_init(dev, 0);
+	/* Leave the 8390 and HP chip reset. */
+	outw(inw(ioaddr + HPP_OPTION) & ~EnableIRQ, ioaddr + HPP_OPTION);
+
+	retval = register_netdev(dev);
+	if (retval)
+		goto out1;
+	return 0;
+out1:
+	iounmap(ei_status.mem);
+out:
+	release_region(ioaddr, HP_IO_EXTENT);
+	return retval;
+}
+
+static int
+hpp_open(struct net_device *dev)
+{
+	int ioaddr = dev->base_addr - NIC_OFFSET;
+	int option_reg;
+	int retval;
+
+	if ((retval = request_irq(dev->irq, eip_interrupt, 0, dev->name, dev))) {
+	    return retval;
+	}
+
+	/* Reset the 8390 and HP chip. */
+	option_reg = inw(ioaddr + HPP_OPTION);
+	outw(option_reg & ~(NICReset + ChipReset), ioaddr + HPP_OPTION);
+	udelay(5);
+	/* Unreset the board and enable interrupts. */
+	outw(option_reg | (EnableIRQ + NICReset + ChipReset), ioaddr + HPP_OPTION);
+
+	/* Set the wrap registers for programmed-I/O operation.   */
+	outw(HW_Page, ioaddr + HP_PAGING);
+	outw((HP_START_PG + TX_PAGES/2) | ((HP_STOP_PG - 1) << 8), ioaddr + 14);
+
+	/* Select the operational page. */
+	outw(Perf_Page, ioaddr + HP_PAGING);
+
+	return eip_open(dev);
+}
+
+static int
+hpp_close(struct net_device *dev)
+{
+	int ioaddr = dev->base_addr - NIC_OFFSET;
+	int option_reg = inw(ioaddr + HPP_OPTION);
+
+	free_irq(dev->irq, dev);
+	eip_close(dev);
+	outw((option_reg & ~EnableIRQ) | MemDisable | NICReset | ChipReset,
+		 ioaddr + HPP_OPTION);
+
+	return 0;
+}
+
+static void
+hpp_reset_8390(struct net_device *dev)
+{
+	int ioaddr = dev->base_addr - NIC_OFFSET;
+	int option_reg = inw(ioaddr + HPP_OPTION);
+
+	if (ei_debug > 1) printk("resetting the 8390 time=%ld...", jiffies);
+
+	outw(option_reg & ~(NICReset + ChipReset), ioaddr + HPP_OPTION);
+	/* Pause a few cycles for the hardware reset to take place. */
+	udelay(5);
+	ei_status.txing = 0;
+	outw(option_reg | (EnableIRQ + NICReset + ChipReset), ioaddr + HPP_OPTION);
+
+	udelay(5);
+
+
+	if ((inb_p(ioaddr+NIC_OFFSET+EN0_ISR) & ENISR_RESET) == 0)
+		printk("%s: hp_reset_8390() did not complete.\n", dev->name);
+
+	if (ei_debug > 1) printk("8390 reset done (%ld).", jiffies);
+}
+
+/* The programmed-I/O version of reading the 4 byte 8390 specific header.
+   Note that transfer with the EtherTwist+ must be on word boundaries. */
+
+static void
+hpp_io_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
+{
+	int ioaddr = dev->base_addr - NIC_OFFSET;
+
+	outw((ring_page<<8), ioaddr + HPP_IN_ADDR);
+	insw(ioaddr + HP_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr)>>1);
+}
+
+/* Block input and output, similar to the Crynwr packet driver. */
+
+static void
+hpp_io_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
+{
+	int ioaddr = dev->base_addr - NIC_OFFSET;
+	char *buf = skb->data;
+
+	outw(ring_offset, ioaddr + HPP_IN_ADDR);
+	insw(ioaddr + HP_DATAPORT, buf, count>>1);
+	if (count & 0x01)
+        buf[count-1] = inw(ioaddr + HP_DATAPORT);
+}
+
+/* The corresponding shared memory versions of the above 2 functions. */
+
+static void
+hpp_mem_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
+{
+	int ioaddr = dev->base_addr - NIC_OFFSET;
+	int option_reg = inw(ioaddr + HPP_OPTION);
+
+	outw((ring_page<<8), ioaddr + HPP_IN_ADDR);
+	outw(option_reg & ~(MemDisable + BootROMEnb), ioaddr + HPP_OPTION);
+	memcpy_fromio(hdr, ei_status.mem, sizeof(struct e8390_pkt_hdr));
+	outw(option_reg, ioaddr + HPP_OPTION);
+	hdr->count = (le16_to_cpu(hdr->count) + 3) & ~3;	/* Round up allocation. */
+}
+
+static void
+hpp_mem_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
+{
+	int ioaddr = dev->base_addr - NIC_OFFSET;
+	int option_reg = inw(ioaddr + HPP_OPTION);
+
+	outw(ring_offset, ioaddr + HPP_IN_ADDR);
+
+	outw(option_reg & ~(MemDisable + BootROMEnb), ioaddr + HPP_OPTION);
+
+	/* Caution: this relies on get_8390_hdr() rounding up count!
+	   Also note that we *can't* use eth_io_copy_and_sum() because
+	   it will not always copy "count" bytes (e.g. padded IP).  */
+
+	memcpy_fromio(skb->data, ei_status.mem, count);
+	outw(option_reg, ioaddr + HPP_OPTION);
+}
+
+/* A special note: we *must* always transfer >=16 bit words.
+   It's always safe to round up, so we do. */
+static void
+hpp_io_block_output(struct net_device *dev, int count,
+					const unsigned char *buf, int start_page)
+{
+	int ioaddr = dev->base_addr - NIC_OFFSET;
+	outw(start_page << 8, ioaddr + HPP_OUT_ADDR);
+	outsl(ioaddr + HP_DATAPORT, buf, (count+3)>>2);
+}
+
+static void
+hpp_mem_block_output(struct net_device *dev, int count,
+				const unsigned char *buf, int start_page)
+{
+	int ioaddr = dev->base_addr - NIC_OFFSET;
+	int option_reg = inw(ioaddr + HPP_OPTION);
+
+	outw(start_page << 8, ioaddr + HPP_OUT_ADDR);
+	outw(option_reg & ~(MemDisable + BootROMEnb), ioaddr + HPP_OPTION);
+	memcpy_toio(ei_status.mem, buf, (count + 3) & ~3);
+	outw(option_reg, ioaddr + HPP_OPTION);
+}
+
+
+#ifdef MODULE
+#define MAX_HPP_CARDS	4	/* Max number of HPP cards per module */
+static struct net_device *dev_hpp[MAX_HPP_CARDS];
+static int io[MAX_HPP_CARDS];
+static int irq[MAX_HPP_CARDS];
+
+module_param_array(io, int, NULL, 0);
+module_param_array(irq, int, NULL, 0);
+MODULE_PARM_DESC(io, "I/O port address(es)");
+MODULE_PARM_DESC(irq, "IRQ number(s); ignored if properly detected");
+MODULE_DESCRIPTION("HP PC-LAN+ ISA ethernet driver");
+MODULE_LICENSE("GPL");
+
+/* This is set up so that only a single autoprobe takes place per call.
+ISA device autoprobes on a running machine are not recommended. */
+int __init
+init_module(void)
+{
+	struct net_device *dev;
+	int this_dev, found = 0;
+
+	for (this_dev = 0; this_dev < MAX_HPP_CARDS; this_dev++) {
+		if (io[this_dev] == 0)  {
+			if (this_dev != 0) break; /* only autoprobe 1st one */
+			printk(KERN_NOTICE "hp-plus.c: Presently autoprobing (not recommended) for a single card.\n");
+		}
+		dev = alloc_eip_netdev();
+		if (!dev)
+			break;
+		dev->irq = irq[this_dev];
+		dev->base_addr = io[this_dev];
+		if (do_hpp_probe(dev) == 0) {
+			dev_hpp[found++] = dev;
+			continue;
+		}
+		free_netdev(dev);
+		printk(KERN_WARNING "hp-plus.c: No HP-Plus card found (i/o = 0x%x).\n", io[this_dev]);
+		break;
+	}
+	if (found)
+		return 0;
+	return -ENXIO;
+}
+
+static void cleanup_card(struct net_device *dev)
+{
+	/* NB: hpp_close() handles free_irq */
+	iounmap(ei_status.mem);
+	release_region(dev->base_addr - NIC_OFFSET, HP_IO_EXTENT);
+}
+
+void __exit
+cleanup_module(void)
+{
+	int this_dev;
+
+	for (this_dev = 0; this_dev < MAX_HPP_CARDS; this_dev++) {
+		struct net_device *dev = dev_hpp[this_dev];
+		if (dev) {
+			unregister_netdev(dev);
+			cleanup_card(dev);
+			free_netdev(dev);
+		}
+	}
+}
+#endif /* MODULE */