diff options
| author | Daniel Vetter <daniel.vetter@ffwll.ch> | 2013-12-09 09:17:02 +0100 |
|---|---|---|
| committer | Daniel Vetter <daniel.vetter@ffwll.ch> | 2013-12-09 09:19:14 +0100 |
| commit | f7698ba75fa283435f5077b9dfb4319d28b9de9a (patch) | |
| tree | 4bc16a615a35baaf2b482de81cd256a69067ff72 /drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | |
| parent | 798183c54799fbe1e5a5bfabb3a8c0505ffd2149 (diff) | |
| parent | 374b105797c3d4f29c685f3be535c35f5689b30e (diff) | |
Merge tag 'v3.13-rc3' into drm-intel-next-queued
Linux 3.13-rc3
I need a backmerge for two reasons:
- For merging the ppgtt patches from Ben I need to pull in the bdw
support.
- We now have duplicated calls to intel_uncore_forcewake_reset in the
setup code to due 2 different patches merged into -next and 3.13.
The conflict is silen so I need the merge to be able to apply
Deepak's fixup patch.
Conflicts:
drivers/gpu/drm/i915/intel_display.c
Trivial conflict, it doesn't even show up in the merge diff.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Diffstat (limited to 'drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c')
| -rw-r--r-- | drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 25 |
1 files changed, 19 insertions, 6 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 51468227bf3..20dcc02431c 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -3122,7 +3122,7 @@ static void bnx2x_bsc_module_sel(struct link_params *params) } static int bnx2x_bsc_read(struct link_params *params, - struct bnx2x_phy *phy, + struct bnx2x *bp, u8 sl_devid, u16 sl_addr, u8 lc_addr, @@ -3131,7 +3131,6 @@ static int bnx2x_bsc_read(struct link_params *params, { u32 val, i; int rc = 0; - struct bnx2x *bp = params->bp; if (xfer_cnt > 16) { DP(NETIF_MSG_LINK, "invalid xfer_cnt %d. Max is 16 bytes\n", @@ -6371,9 +6370,15 @@ int bnx2x_set_led(struct link_params *params, * intended override. */ break; - } else + } else { + u32 nig_led_mode = ((params->hw_led_mode << + SHARED_HW_CFG_LED_MODE_SHIFT) == + SHARED_HW_CFG_LED_EXTPHY2) ? + (SHARED_HW_CFG_LED_PHY1 >> + SHARED_HW_CFG_LED_MODE_SHIFT) : hw_led_mode; REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, - hw_led_mode); + nig_led_mode); + } REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 + port*4, 0); /* Set blinking rate to ~15.9Hz */ @@ -7917,7 +7922,7 @@ static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy, usleep_range(1000, 2000); bnx2x_warpcore_power_module(params, 1); } - rc = bnx2x_bsc_read(params, phy, dev_addr, addr32, 0, byte_cnt, + rc = bnx2x_bsc_read(params, bp, dev_addr, addr32, 0, byte_cnt, data_array); } while ((rc != 0) && (++cnt < I2C_WA_RETRY_CNT)); @@ -10653,10 +10658,18 @@ static void bnx2x_848xx_set_link_led(struct bnx2x_phy *phy, 0x40); } else { + /* EXTPHY2 LED mode indicate that the 100M/1G/10G LED + * sources are all wired through LED1, rather than only + * 10G in other modes. + */ + val = ((params->hw_led_mode << + SHARED_HW_CFG_LED_MODE_SHIFT) == + SHARED_HW_CFG_LED_EXTPHY2) ? 0x98 : 0x80; + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_LED1_MASK, - 0x80); + val); /* Tell LED3 to blink on source */ bnx2x_cl45_read(bp, phy, |