bnx2x, cnic, bnx2i, bnx2fc: Fix bnx2i and bnx2fc regressions.

commit b9871bcfd211d316adee317608dab44c58d6ea2d
    bnx2x: VF RSS support - PF side

changed the configuration of the doorbell HW and it broke iSCSI and FCoE.
We fix this by making compatible changes to the doorbell address in bnx2i
and bnx2fc.  For the userspace driver, we need to pass a modified CID
so that the existing userspace driver will calculate the correct doorbell
address and continue to work.

Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

3 files changed, 39 insertions, 4 deletions

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index 70b6a05834d..97b3d32a98b 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -246,8 +246,37 @@ enum {
 	BNX2X_MAX_CNIC_ETH_CL_ID_IDX,
 };
 
-#define BNX2X_CNIC_START_ETH_CID(bp)	(BNX2X_NUM_NON_CNIC_QUEUES(bp) *\
+/* use a value high enough to be above all the PFs, which has least significant
+ * nibble as 8, so when cnic needs to come up with a CID for UIO to use to
+ * calculate doorbell address according to old doorbell configuration scheme
+ * (db_msg_sz 1 << 7 * cid + 0x40 DPM offset) it can come up with a valid number
+ * We must avoid coming up with cid 8 for iscsi since according to this method
+ * the designated UIO cid will come out 0 and it has a special handling for that
+ * case which doesn't suit us. Therefore will will cieling to closes cid which
+ * has least signigifcant nibble 8 and if it is 8 we will move forward to 0x18.
+ */
+
+#define BNX2X_1st_NON_L2_ETH_CID(bp)	(BNX2X_NUM_NON_CNIC_QUEUES(bp) * \
 					 (bp)->max_cos)
+/* amount of cids traversed by UIO's DPM addition to doorbell */
+#define UIO_DPM				8
+/* roundup to DPM offset */
+#define UIO_ROUNDUP(bp)			(roundup(BNX2X_1st_NON_L2_ETH_CID(bp), \
+					 UIO_DPM))
+/* offset to nearest value which has lsb nibble matching DPM */
+#define UIO_CID_OFFSET(bp)		((UIO_ROUNDUP(bp) + UIO_DPM) % \
+					 (UIO_DPM * 2))
+/* add offset to rounded-up cid to get a value which could be used with UIO */
+#define UIO_DPM_ALIGN(bp)		(UIO_ROUNDUP(bp) + UIO_CID_OFFSET(bp))
+/* but wait - avoid UIO special case for cid 0 */
+#define UIO_DPM_CID0_OFFSET(bp)		((UIO_DPM * 2) * \
+					 (UIO_DPM_ALIGN(bp) == UIO_DPM))
+/* Properly DPM aligned CID dajusted to cid 0 secal case */
+#define BNX2X_CNIC_START_ETH_CID(bp)	(UIO_DPM_ALIGN(bp) + \
+					 (UIO_DPM_CID0_OFFSET(bp)))
+/* how many cids were wasted  - need this value for cid allocation */
+#define UIO_CID_PAD(bp)			(BNX2X_CNIC_START_ETH_CID(bp) - \
+					 BNX2X_1st_NON_L2_ETH_CID(bp))
 	/* iSCSI L2 */
 #define	BNX2X_ISCSI_ETH_CID(bp)		(BNX2X_CNIC_START_ETH_CID(bp))
 	/* FCoE L2 */
@@ -1680,10 +1709,11 @@ struct bnx2x {
  * Maximum CID count that might be required by the bnx2x:
  * Max RSS * Max_Tx_Multi_Cos + FCoE + iSCSI
  */
+
 #define BNX2X_L2_CID_COUNT(bp)	(BNX2X_NUM_ETH_QUEUES(bp) * BNX2X_MULTI_TX_COS \
-				+ 2 * CNIC_SUPPORT(bp))
+				+ CNIC_SUPPORT(bp) * (2 + UIO_CID_PAD(bp)))
 #define BNX2X_L2_MAX_CID(bp)	(BNX2X_MAX_RSS_COUNT(bp) * BNX2X_MULTI_TX_COS \
-				+ 2 * CNIC_SUPPORT(bp))
+				+ CNIC_SUPPORT(bp) * (2 + UIO_CID_PAD(bp)))
 #define L2_ILT_LINES(bp)	(DIV_ROUND_UP(BNX2X_L2_CID_COUNT(bp),\
 					ILT_PAGE_CIDS))
 
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 62c59eda123..a6704b55504 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -13632,6 +13632,10 @@ void bnx2x_setup_cnic_info(struct bnx2x *bp)
 	cp->fcoe_init_cid = BNX2X_FCOE_ETH_CID(bp);
 	cp->iscsi_l2_cid = BNX2X_ISCSI_ETH_CID(bp);
 
+	DP(NETIF_MSG_IFUP, "BNX2X_1st_NON_L2_ETH_CID(bp) %x, cp->starting_cid %x, cp->fcoe_init_cid %x, cp->iscsi_l2_cid %x\n",
+	   BNX2X_1st_NON_L2_ETH_CID(bp), cp->starting_cid, cp->fcoe_init_cid,
+	   cp->iscsi_l2_cid);
+
 	if (NO_ISCSI_OOO(bp))
 		cp->drv_state |= CNIC_DRV_STATE_NO_ISCSI_OOO;
 }
diff --git a/drivers/net/ethernet/broadcom/cnic.c b/drivers/net/ethernet/broadcom/cnic.c
index 8142480d977..93da16b36df 100644
--- a/drivers/net/ethernet/broadcom/cnic.c
+++ b/drivers/net/ethernet/broadcom/cnic.c
@@ -5217,7 +5217,8 @@ static void cnic_init_rings(struct cnic_dev *dev)
 				"iSCSI CLIENT_SETUP did not complete\n");
 		cnic_spq_completion(dev, DRV_CTL_RET_L2_SPQ_CREDIT_CMD, 1);
 		cnic_ring_ctl(dev, cid, cli, 1);
-		*cid_ptr = cid;
+		*cid_ptr = cid >> 4;
+		*(cid_ptr + 1) = cid * bp->db_size;
 	}
 }