Merge branch 'master' into pm-sleep

* master: (848 commits)
  SELinux: Fix RCU deref check warning in sel_netport_insert()
  binary_sysctl(): fix memory leak
  mm/vmalloc.c: remove static declaration of va from __get_vm_area_node
  ipmi_watchdog: restore settings when BMC reset
  oom: fix integer overflow of points in oom_badness
  memcg: keep root group unchanged if creation fails
  nilfs2: potential integer overflow in nilfs_ioctl_clean_segments()
  nilfs2: unbreak compat ioctl
  cpusets: stall when updating mems_allowed for mempolicy or disjoint nodemask
  evm: prevent racing during tfm allocation
  evm: key must be set once during initialization
  mmc: vub300: fix type of firmware_rom_wait_states module parameter
  Revert "mmc: enable runtime PM by default"
  mmc: sdhci: remove "state" argument from sdhci_suspend_host
  x86, dumpstack: Fix code bytes breakage due to missing KERN_CONT
  IB/qib: Correct sense on freectxts increment and decrement
  RDMA/cma: Verify private data length
  cgroups: fix a css_set not found bug in cgroup_attach_proc
  oprofile: Fix uninitialized memory access when writing to writing to oprofilefs
  Revert "xen/pv-on-hvm kexec: add xs_reset_watches to shutdown watches from old kernel"
  ...

Conflicts:
	kernel/cgroup_freezer.c

3 files changed, 40 insertions, 2 deletions

diff --git a/drivers/net/ethernet/broadcom/b44.c b/drivers/net/ethernet/broadcom/b44.c
index 4cf835dbc12..3fb66d09ece 100644
--- a/drivers/net/ethernet/broadcom/b44.c
+++ b/drivers/net/ethernet/broadcom/b44.c
@@ -608,7 +608,7 @@ static void b44_tx(struct b44 *bp)
 				 skb->len,
 				 DMA_TO_DEVICE);
 		rp->skb = NULL;
-		dev_kfree_skb(skb);
+		dev_kfree_skb_irq(skb);
 	}
 
 	bp->tx_cons = cons;
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index bce203fa4b9..882f48f0a03 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -10327,6 +10327,43 @@ static int bnx2x_54618se_config_init(struct bnx2x_phy *phy,
 	return 0;
 }
 
+
+static void bnx2x_5461x_set_link_led(struct bnx2x_phy *phy,
+				       struct link_params *params, u8 mode)
+{
+	struct bnx2x *bp = params->bp;
+	u16 temp;
+
+	bnx2x_cl22_write(bp, phy,
+		MDIO_REG_GPHY_SHADOW,
+		MDIO_REG_GPHY_SHADOW_LED_SEL1);
+	bnx2x_cl22_read(bp, phy,
+		MDIO_REG_GPHY_SHADOW,
+		&temp);
+	temp &= 0xff00;
+
+	DP(NETIF_MSG_LINK, "54618x set link led (mode=%x)\n", mode);
+	switch (mode) {
+	case LED_MODE_FRONT_PANEL_OFF:
+	case LED_MODE_OFF:
+		temp |= 0x00ee;
+		break;
+	case LED_MODE_OPER:
+		temp |= 0x0001;
+		break;
+	case LED_MODE_ON:
+		temp |= 0x00ff;
+		break;
+	default:
+		break;
+	}
+	bnx2x_cl22_write(bp, phy,
+		MDIO_REG_GPHY_SHADOW,
+		MDIO_REG_GPHY_SHADOW_WR_ENA | temp);
+	return;
+}
+
+
 static void bnx2x_54618se_link_reset(struct bnx2x_phy *phy,
 				     struct link_params *params)
 {
@@ -11103,7 +11140,7 @@ static struct bnx2x_phy phy_54618se = {
 	.config_loopback = (config_loopback_t)bnx2x_54618se_config_loopback,
 	.format_fw_ver	= (format_fw_ver_t)NULL,
 	.hw_reset	= (hw_reset_t)NULL,
-	.set_link_led	= (set_link_led_t)NULL,
+	.set_link_led	= (set_link_led_t)bnx2x_5461x_set_link_led,
 	.phy_specific_func = (phy_specific_func_t)NULL
 };
 /*****************************************************************/
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
index fc7bd0f23c0..e58073ef33b 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
@@ -6990,6 +6990,7 @@ Theotherbitsarereservedandshouldbezero*/
 #define MDIO_REG_INTR_MASK				0x1b
 #define MDIO_REG_INTR_MASK_LINK_STATUS			(0x1 << 1)
 #define MDIO_REG_GPHY_SHADOW				0x1c
+#define MDIO_REG_GPHY_SHADOW_LED_SEL1			(0x0d << 10)
 #define MDIO_REG_GPHY_SHADOW_LED_SEL2			(0x0e << 10)
 #define MDIO_REG_GPHY_SHADOW_WR_ENA			(0x1 << 15)
 #define MDIO_REG_GPHY_SHADOW_AUTO_DET_MED		(0x1e << 10)