Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1745 commits)
  dp83640: free packet queues on remove
  dp83640: use proper function to free transmit time stamping packets
  ipv6: Do not use routes from locally generated RAs
  |PATCH net-next] tg3: add tx_dropped counter
  be2net: don't create multiple RX/TX rings in multi channel mode
  be2net: don't create multiple TXQs in BE2
  be2net: refactor VF setup/teardown code into be_vf_setup/clear()
  be2net: add vlan/rx-mode/flow-control config to be_setup()
  net_sched: cls_flow: use skb_header_pointer()
  ipv4: avoid useless call of the function check_peer_pmtu
  TCP: remove TCP_DEBUG
  net: Fix driver name for mdio-gpio.c
  ipv4: tcp: fix TOS value in ACK messages sent from TIME_WAIT
  rtnetlink: Add missing manual netlink notification in dev_change_net_namespaces
  ipv4: fix ipsec forward performance regression
  jme: fix irq storm after suspend/resume
  route: fix ICMP redirect validation
  net: hold sock reference while processing tx timestamps
  tcp: md5: add more const attributes
  Add ethtool -g support to virtio_net
  ...

Fix up conflicts in:
 - drivers/net/Kconfig:
	The split-up generated a trivial conflict with removal of a
	stale reference to Documentation/networking/net-modules.txt.
	Remove it from the new location instead.
 - fs/sysfs/dir.c:
	Fairly nasty conflicts with the sysfs rb-tree usage, conflicting
	with Eric Biederman's changes for tagged directories.

1 files changed, 941 insertions, 0 deletions

diff --git a/drivers/net/ethernet/chelsio/cxgb3/ael1002.c b/drivers/net/ethernet/chelsio/cxgb3/ael1002.c
new file mode 100644
index 00000000000..2028da95afa
--- /dev/null
+++ b/drivers/net/ethernet/chelsio/cxgb3/ael1002.c
@@ -0,0 +1,941 @@
+/*
+ * Copyright (c) 2005-2008 Chelsio, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include "common.h"
+#include "regs.h"
+
+enum {
+	AEL100X_TX_CONFIG1 = 0xc002,
+	AEL1002_PWR_DOWN_HI = 0xc011,
+	AEL1002_PWR_DOWN_LO = 0xc012,
+	AEL1002_XFI_EQL = 0xc015,
+	AEL1002_LB_EN = 0xc017,
+	AEL_OPT_SETTINGS = 0xc017,
+	AEL_I2C_CTRL = 0xc30a,
+	AEL_I2C_DATA = 0xc30b,
+	AEL_I2C_STAT = 0xc30c,
+	AEL2005_GPIO_CTRL = 0xc214,
+	AEL2005_GPIO_STAT = 0xc215,
+
+	AEL2020_GPIO_INTR   = 0xc103,	/* Latch High (LH) */
+	AEL2020_GPIO_CTRL   = 0xc108,	/* Store Clear (SC) */
+	AEL2020_GPIO_STAT   = 0xc10c,	/* Read Only (RO) */
+	AEL2020_GPIO_CFG    = 0xc110,	/* Read Write (RW) */
+
+	AEL2020_GPIO_SDA    = 0,	/* IN: i2c serial data */
+	AEL2020_GPIO_MODDET = 1,	/* IN: Module Detect */
+	AEL2020_GPIO_0      = 3,	/* IN: unassigned */
+	AEL2020_GPIO_1      = 2,	/* OUT: unassigned */
+	AEL2020_GPIO_LSTAT  = AEL2020_GPIO_1, /* wired to link status LED */
+};
+
+enum { edc_none, edc_sr, edc_twinax };
+
+/* PHY module I2C device address */
+enum {
+	MODULE_DEV_ADDR	= 0xa0,
+	SFF_DEV_ADDR	= 0xa2,
+};
+
+/* PHY transceiver type */
+enum {
+	phy_transtype_unknown = 0,
+	phy_transtype_sfp     = 3,
+	phy_transtype_xfp     = 6,
+};
+
+#define AEL2005_MODDET_IRQ 4
+
+struct reg_val {
+	unsigned short mmd_addr;
+	unsigned short reg_addr;
+	unsigned short clear_bits;
+	unsigned short set_bits;
+};
+
+static int set_phy_regs(struct cphy *phy, const struct reg_val *rv)
+{
+	int err;
+
+	for (err = 0; rv->mmd_addr && !err; rv++) {
+		if (rv->clear_bits == 0xffff)
+			err = t3_mdio_write(phy, rv->mmd_addr, rv->reg_addr,
+					    rv->set_bits);
+		else
+			err = t3_mdio_change_bits(phy, rv->mmd_addr,
+						  rv->reg_addr, rv->clear_bits,
+						  rv->set_bits);
+	}
+	return err;
+}
+
+static void ael100x_txon(struct cphy *phy)
+{
+	int tx_on_gpio =
+		phy->mdio.prtad == 0 ? F_GPIO7_OUT_VAL : F_GPIO2_OUT_VAL;
+
+	msleep(100);
+	t3_set_reg_field(phy->adapter, A_T3DBG_GPIO_EN, 0, tx_on_gpio);
+	msleep(30);
+}
+
+/*
+ * Read an 8-bit word from a device attached to the PHY's i2c bus.
+ */
+static int ael_i2c_rd(struct cphy *phy, int dev_addr, int word_addr)
+{
+	int i, err;
+	unsigned int stat, data;
+
+	err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL_I2C_CTRL,
+			    (dev_addr << 8) | (1 << 8) | word_addr);
+	if (err)
+		return err;
+
+	for (i = 0; i < 200; i++) {
+		msleep(1);
+		err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, AEL_I2C_STAT, &stat);
+		if (err)
+			return err;
+		if ((stat & 3) == 1) {
+			err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, AEL_I2C_DATA,
+					   &data);
+			if (err)
+				return err;
+			return data >> 8;
+		}
+	}
+	CH_WARN(phy->adapter, "PHY %u i2c read of dev.addr %#x.%#x timed out\n",
+		phy->mdio.prtad, dev_addr, word_addr);
+	return -ETIMEDOUT;
+}
+
+static int ael1002_power_down(struct cphy *phy, int enable)
+{
+	int err;
+
+	err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, MDIO_PMA_TXDIS, !!enable);
+	if (!err)
+		err = mdio_set_flag(&phy->mdio, phy->mdio.prtad,
+				    MDIO_MMD_PMAPMD, MDIO_CTRL1,
+				    MDIO_CTRL1_LPOWER, enable);
+	return err;
+}
+
+static int ael1002_reset(struct cphy *phy, int wait)
+{
+	int err;
+
+	if ((err = ael1002_power_down(phy, 0)) ||
+	    (err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL100X_TX_CONFIG1, 1)) ||
+	    (err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL1002_PWR_DOWN_HI, 0)) ||
+	    (err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL1002_PWR_DOWN_LO, 0)) ||
+	    (err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL1002_XFI_EQL, 0x18)) ||
+	    (err = t3_mdio_change_bits(phy, MDIO_MMD_PMAPMD, AEL1002_LB_EN,
+				       0, 1 << 5)))
+		return err;
+	return 0;
+}
+
+static int ael1002_intr_noop(struct cphy *phy)
+{
+	return 0;
+}
+
+/*
+ * Get link status for a 10GBASE-R device.
+ */
+static int get_link_status_r(struct cphy *phy, int *link_ok, int *speed,
+			     int *duplex, int *fc)
+{
+	if (link_ok) {
+		unsigned int stat0, stat1, stat2;
+		int err = t3_mdio_read(phy, MDIO_MMD_PMAPMD,
+				       MDIO_PMA_RXDET, &stat0);
+
+		if (!err)
+			err = t3_mdio_read(phy, MDIO_MMD_PCS,
+					   MDIO_PCS_10GBRT_STAT1, &stat1);
+		if (!err)
+			err = t3_mdio_read(phy, MDIO_MMD_PHYXS,
+					   MDIO_PHYXS_LNSTAT, &stat2);
+		if (err)
+			return err;
+		*link_ok = (stat0 & stat1 & (stat2 >> 12)) & 1;
+	}
+	if (speed)
+		*speed = SPEED_10000;
+	if (duplex)
+		*duplex = DUPLEX_FULL;
+	return 0;
+}
+
+static struct cphy_ops ael1002_ops = {
+	.reset = ael1002_reset,
+	.intr_enable = ael1002_intr_noop,
+	.intr_disable = ael1002_intr_noop,
+	.intr_clear = ael1002_intr_noop,
+	.intr_handler = ael1002_intr_noop,
+	.get_link_status = get_link_status_r,
+	.power_down = ael1002_power_down,
+	.mmds = MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS | MDIO_DEVS_PHYXS,
+};
+
+int t3_ael1002_phy_prep(struct cphy *phy, struct adapter *adapter,
+			int phy_addr, const struct mdio_ops *mdio_ops)
+{
+	cphy_init(phy, adapter, phy_addr, &ael1002_ops, mdio_ops,
+		  SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_FIBRE,
+		   "10GBASE-R");
+	ael100x_txon(phy);
+	return 0;
+}
+
+static int ael1006_reset(struct cphy *phy, int wait)
+{
+	return t3_phy_reset(phy, MDIO_MMD_PMAPMD, wait);
+}
+
+static struct cphy_ops ael1006_ops = {
+	.reset = ael1006_reset,
+	.intr_enable = t3_phy_lasi_intr_enable,
+	.intr_disable = t3_phy_lasi_intr_disable,
+	.intr_clear = t3_phy_lasi_intr_clear,
+	.intr_handler = t3_phy_lasi_intr_handler,
+	.get_link_status = get_link_status_r,
+	.power_down = ael1002_power_down,
+	.mmds = MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS | MDIO_DEVS_PHYXS,
+};
+
+int t3_ael1006_phy_prep(struct cphy *phy, struct adapter *adapter,
+			     int phy_addr, const struct mdio_ops *mdio_ops)
+{
+	cphy_init(phy, adapter, phy_addr, &ael1006_ops, mdio_ops,
+		  SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_FIBRE,
+		   "10GBASE-SR");
+	ael100x_txon(phy);
+	return 0;
+}
+
+/*
+ * Decode our module type.
+ */
+static int ael2xxx_get_module_type(struct cphy *phy, int delay_ms)
+{
+	int v;
+
+	if (delay_ms)
+		msleep(delay_ms);
+
+	/* see SFF-8472 for below */
+	v = ael_i2c_rd(phy, MODULE_DEV_ADDR, 3);
+	if (v < 0)
+		return v;
+
+	if (v == 0x10)
+		return phy_modtype_sr;
+	if (v == 0x20)
+		return phy_modtype_lr;
+	if (v == 0x40)
+		return phy_modtype_lrm;
+
+	v = ael_i2c_rd(phy, MODULE_DEV_ADDR, 6);
+	if (v < 0)
+		return v;
+	if (v != 4)
+		goto unknown;
+
+	v = ael_i2c_rd(phy, MODULE_DEV_ADDR, 10);
+	if (v < 0)
+		return v;
+
+	if (v & 0x80) {
+		v = ael_i2c_rd(phy, MODULE_DEV_ADDR, 0x12);
+		if (v < 0)
+			return v;
+		return v > 10 ? phy_modtype_twinax_long : phy_modtype_twinax;
+	}
+unknown:
+	return phy_modtype_unknown;
+}
+
+/*
+ * Code to support the Aeluros/NetLogic 2005 10Gb PHY.
+ */
+static int ael2005_setup_sr_edc(struct cphy *phy)
+{
+	static const struct reg_val regs[] = {
+		{ MDIO_MMD_PMAPMD, 0xc003, 0xffff, 0x181 },
+		{ MDIO_MMD_PMAPMD, 0xc010, 0xffff, 0x448a },
+		{ MDIO_MMD_PMAPMD, 0xc04a, 0xffff, 0x5200 },
+		{ 0, 0, 0, 0 }
+	};
+
+	int i, err;
+
+	err = set_phy_regs(phy, regs);
+	if (err)
+		return err;
+
+	msleep(50);
+
+	if (phy->priv != edc_sr)
+		err = t3_get_edc_fw(phy, EDC_OPT_AEL2005,
+				    EDC_OPT_AEL2005_SIZE);
+	if (err)
+		return err;
+
+	for (i = 0; i <  EDC_OPT_AEL2005_SIZE / sizeof(u16) && !err; i += 2)
+		err = t3_mdio_write(phy, MDIO_MMD_PMAPMD,
+				    phy->phy_cache[i],
+				    phy->phy_cache[i + 1]);
+	if (!err)
+		phy->priv = edc_sr;
+	return err;
+}
+
+static int ael2005_setup_twinax_edc(struct cphy *phy, int modtype)
+{
+	static const struct reg_val regs[] = {
+		{ MDIO_MMD_PMAPMD, 0xc04a, 0xffff, 0x5a00 },
+		{ 0, 0, 0, 0 }
+	};
+	static const struct reg_val preemphasis[] = {
+		{ MDIO_MMD_PMAPMD, 0xc014, 0xffff, 0xfe16 },
+		{ MDIO_MMD_PMAPMD, 0xc015, 0xffff, 0xa000 },
+		{ 0, 0, 0, 0 }
+	};
+	int i, err;
+
+	err = set_phy_regs(phy, regs);
+	if (!err && modtype == phy_modtype_twinax_long)
+		err = set_phy_regs(phy, preemphasis);
+	if (err)
+		return err;
+
+	msleep(50);
+
+	if (phy->priv != edc_twinax)
+		err = t3_get_edc_fw(phy, EDC_TWX_AEL2005,
+				    EDC_TWX_AEL2005_SIZE);
+	if (err)
+		return err;
+
+	for (i = 0; i <  EDC_TWX_AEL2005_SIZE / sizeof(u16) && !err; i += 2)
+		err = t3_mdio_write(phy, MDIO_MMD_PMAPMD,
+				    phy->phy_cache[i],
+				    phy->phy_cache[i + 1]);
+	if (!err)
+		phy->priv = edc_twinax;
+	return err;
+}
+
+static int ael2005_get_module_type(struct cphy *phy, int delay_ms)
+{
+	int v;
+	unsigned int stat;
+
+	v = t3_mdio_read(phy, MDIO_MMD_PMAPMD, AEL2005_GPIO_CTRL, &stat);
+	if (v)
+		return v;
+
+	if (stat & (1 << 8))			/* module absent */
+		return phy_modtype_none;
+
+	return ael2xxx_get_module_type(phy, delay_ms);
+}
+
+static int ael2005_intr_enable(struct cphy *phy)
+{
+	int err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL2005_GPIO_CTRL, 0x200);
+	return err ? err : t3_phy_lasi_intr_enable(phy);
+}
+
+static int ael2005_intr_disable(struct cphy *phy)
+{
+	int err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL2005_GPIO_CTRL, 0x100);
+	return err ? err : t3_phy_lasi_intr_disable(phy);
+}
+
+static int ael2005_intr_clear(struct cphy *phy)
+{
+	int err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL2005_GPIO_CTRL, 0xd00);
+	return err ? err : t3_phy_lasi_intr_clear(phy);
+}
+
+static int ael2005_reset(struct cphy *phy, int wait)
+{
+	static const struct reg_val regs0[] = {
+		{ MDIO_MMD_PMAPMD, 0xc001, 0, 1 << 5 },
+		{ MDIO_MMD_PMAPMD, 0xc017, 0, 1 << 5 },
+		{ MDIO_MMD_PMAPMD, 0xc013, 0xffff, 0xf341 },
+		{ MDIO_MMD_PMAPMD, 0xc210, 0xffff, 0x8000 },
+		{ MDIO_MMD_PMAPMD, 0xc210, 0xffff, 0x8100 },
+		{ MDIO_MMD_PMAPMD, 0xc210, 0xffff, 0x8000 },
+		{ MDIO_MMD_PMAPMD, 0xc210, 0xffff, 0 },
+		{ 0, 0, 0, 0 }
+	};
+	static const struct reg_val regs1[] = {
+		{ MDIO_MMD_PMAPMD, 0xca00, 0xffff, 0x0080 },
+		{ MDIO_MMD_PMAPMD, 0xca12, 0xffff, 0 },
+		{ 0, 0, 0, 0 }
+	};
+
+	int err;
+	unsigned int lasi_ctrl;
+
+	err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_CTRL,
+			   &lasi_ctrl);
+	if (err)
+		return err;
+
+	err = t3_phy_reset(phy, MDIO_MMD_PMAPMD, 0);
+	if (err)
+		return err;
+
+	msleep(125);
+	phy->priv = edc_none;
+	err = set_phy_regs(phy, regs0);
+	if (err)
+		return err;
+
+	msleep(50);
+
+	err = ael2005_get_module_type(phy, 0);
+	if (err < 0)
+		return err;
+	phy->modtype = err;
+
+	if (err == phy_modtype_twinax || err == phy_modtype_twinax_long)
+		err = ael2005_setup_twinax_edc(phy, err);
+	else
+		err = ael2005_setup_sr_edc(phy);
+	if (err)
+		return err;
+
+	err = set_phy_regs(phy, regs1);
+	if (err)
+		return err;
+
+	/* reset wipes out interrupts, reenable them if they were on */
+	if (lasi_ctrl & 1)
+		err = ael2005_intr_enable(phy);
+	return err;
+}
+
+static int ael2005_intr_handler(struct cphy *phy)
+{
+	unsigned int stat;
+	int ret, edc_needed, cause = 0;
+
+	ret = t3_mdio_read(phy, MDIO_MMD_PMAPMD, AEL2005_GPIO_STAT, &stat);
+	if (ret)
+		return ret;
+
+	if (stat & AEL2005_MODDET_IRQ) {
+		ret = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL2005_GPIO_CTRL,
+				    0xd00);
+		if (ret)
+			return ret;
+
+		/* modules have max 300 ms init time after hot plug */
+		ret = ael2005_get_module_type(phy, 300);
+		if (ret < 0)
+			return ret;
+
+		phy->modtype = ret;
+		if (ret == phy_modtype_none)
+			edc_needed = phy->priv;       /* on unplug retain EDC */
+		else if (ret == phy_modtype_twinax ||
+			 ret == phy_modtype_twinax_long)
+			edc_needed = edc_twinax;
+		else
+			edc_needed = edc_sr;
+
+		if (edc_needed != phy->priv) {
+			ret = ael2005_reset(phy, 0);
+			return ret ? ret : cphy_cause_module_change;
+		}
+		cause = cphy_cause_module_change;
+	}
+
+	ret = t3_phy_lasi_intr_handler(phy);
+	if (ret < 0)
+		return ret;
+
+	ret |= cause;
+	return ret ? ret : cphy_cause_link_change;
+}
+
+static struct cphy_ops ael2005_ops = {
+	.reset           = ael2005_reset,
+	.intr_enable     = ael2005_intr_enable,
+	.intr_disable    = ael2005_intr_disable,
+	.intr_clear      = ael2005_intr_clear,
+	.intr_handler    = ael2005_intr_handler,
+	.get_link_status = get_link_status_r,
+	.power_down      = ael1002_power_down,
+	.mmds            = MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS | MDIO_DEVS_PHYXS,
+};
+
+int t3_ael2005_phy_prep(struct cphy *phy, struct adapter *adapter,
+			int phy_addr, const struct mdio_ops *mdio_ops)
+{
+	cphy_init(phy, adapter, phy_addr, &ael2005_ops, mdio_ops,
+		  SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_FIBRE |
+		  SUPPORTED_IRQ, "10GBASE-R");
+	msleep(125);
+	return t3_mdio_change_bits(phy, MDIO_MMD_PMAPMD, AEL_OPT_SETTINGS, 0,
+				   1 << 5);
+}
+
+/*
+ * Setup EDC and other parameters for operation with an optical module.
+ */
+static int ael2020_setup_sr_edc(struct cphy *phy)
+{
+	static const struct reg_val regs[] = {
+		/* set CDR offset to 10 */
+		{ MDIO_MMD_PMAPMD, 0xcc01, 0xffff, 0x488a },
+
+		/* adjust 10G RX bias current */
+		{ MDIO_MMD_PMAPMD, 0xcb1b, 0xffff, 0x0200 },
+		{ MDIO_MMD_PMAPMD, 0xcb1c, 0xffff, 0x00f0 },
+		{ MDIO_MMD_PMAPMD, 0xcc06, 0xffff, 0x00e0 },
+
+		/* end */
+		{ 0, 0, 0, 0 }
+	};
+	int err;
+
+	err = set_phy_regs(phy, regs);
+	msleep(50);
+	if (err)
+		return err;
+
+	phy->priv = edc_sr;
+	return 0;
+}
+
+/*
+ * Setup EDC and other parameters for operation with an TWINAX module.
+ */
+static int ael2020_setup_twinax_edc(struct cphy *phy, int modtype)
+{
+	/* set uC to 40MHz */
+	static const struct reg_val uCclock40MHz[] = {
+		{ MDIO_MMD_PMAPMD, 0xff28, 0xffff, 0x4001 },
+		{ MDIO_MMD_PMAPMD, 0xff2a, 0xffff, 0x0002 },
+		{ 0, 0, 0, 0 }
+	};
+
+	/* activate uC clock */
+	static const struct reg_val uCclockActivate[] = {
+		{ MDIO_MMD_PMAPMD, 0xd000, 0xffff, 0x5200 },
+		{ 0, 0, 0, 0 }
+	};
+
+	/* set PC to start of SRAM and activate uC */
+	static const struct reg_val uCactivate[] = {
+		{ MDIO_MMD_PMAPMD, 0xd080, 0xffff, 0x0100 },
+		{ MDIO_MMD_PMAPMD, 0xd092, 0xffff, 0x0000 },
+		{ 0, 0, 0, 0 }
+	};
+	int i, err;
+
+	/* set uC clock and activate it */
+	err = set_phy_regs(phy, uCclock40MHz);
+	msleep(500);
+	if (err)
+		return err;
+	err = set_phy_regs(phy, uCclockActivate);
+	msleep(500);
+	if (err)
+		return err;
+
+	if (phy->priv != edc_twinax)
+		err = t3_get_edc_fw(phy, EDC_TWX_AEL2020,
+				    EDC_TWX_AEL2020_SIZE);
+	if (err)
+		return err;
+
+	for (i = 0; i <  EDC_TWX_AEL2020_SIZE / sizeof(u16) && !err; i += 2)
+		err = t3_mdio_write(phy, MDIO_MMD_PMAPMD,
+				    phy->phy_cache[i],
+				    phy->phy_cache[i + 1]);
+	/* activate uC */
+	err = set_phy_regs(phy, uCactivate);
+	if (!err)
+		phy->priv = edc_twinax;
+	return err;
+}
+
+/*
+ * Return Module Type.
+ */
+static int ael2020_get_module_type(struct cphy *phy, int delay_ms)
+{
+	int v;
+	unsigned int stat;
+
+	v = t3_mdio_read(phy, MDIO_MMD_PMAPMD, AEL2020_GPIO_STAT, &stat);
+	if (v)
+		return v;
+
+	if (stat & (0x1 << (AEL2020_GPIO_MODDET*4))) {
+		/* module absent */
+		return phy_modtype_none;
+	}
+
+	return ael2xxx_get_module_type(phy, delay_ms);
+}
+
+/*
+ * Enable PHY interrupts.  We enable "Module Detection" interrupts (on any
+ * state transition) and then generic Link Alarm Status Interrupt (LASI).
+ */
+static int ael2020_intr_enable(struct cphy *phy)
+{
+	static const struct reg_val regs[] = {
+		/* output Module's Loss Of Signal (LOS) to LED */
+		{ MDIO_MMD_PMAPMD, AEL2020_GPIO_CFG+AEL2020_GPIO_LSTAT,
+			0xffff, 0x4 },
+		{ MDIO_MMD_PMAPMD, AEL2020_GPIO_CTRL,
+			0xffff, 0x8 << (AEL2020_GPIO_LSTAT*4) },
+
+		 /* enable module detect status change interrupts */
+		{ MDIO_MMD_PMAPMD, AEL2020_GPIO_CTRL,
+			0xffff, 0x2 << (AEL2020_GPIO_MODDET*4) },
+
+		/* end */
+		{ 0, 0, 0, 0 }
+	};
+	int err, link_ok = 0;
+
+	/* set up "link status" LED and enable module change interrupts */
+	err = set_phy_regs(phy, regs);
+	if (err)
+		return err;
+
+	err = get_link_status_r(phy, &link_ok, NULL, NULL, NULL);
+	if (err)
+		return err;
+	if (link_ok)
+		t3_link_changed(phy->adapter,
+				phy2portid(phy));
+
+	err = t3_phy_lasi_intr_enable(phy);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+/*
+ * Disable PHY interrupts.  The mirror of the above ...
+ */
+static int ael2020_intr_disable(struct cphy *phy)
+{
+	static const struct reg_val regs[] = {
+		/* reset "link status" LED to "off" */
+		{ MDIO_MMD_PMAPMD, AEL2020_GPIO_CTRL,
+			0xffff, 0xb << (AEL2020_GPIO_LSTAT*4) },
+
+		/* disable module detect status change interrupts */
+		{ MDIO_MMD_PMAPMD, AEL2020_GPIO_CTRL,
+			0xffff, 0x1 << (AEL2020_GPIO_MODDET*4) },
+
+		/* end */
+		{ 0, 0, 0, 0 }
+	};
+	int err;
+
+	/* turn off "link status" LED and disable module change interrupts */
+	err = set_phy_regs(phy, regs);
+	if (err)
+		return err;
+
+	return t3_phy_lasi_intr_disable(phy);
+}
+
+/*
+ * Clear PHY interrupt state.
+ */
+static int ael2020_intr_clear(struct cphy *phy)
+{
+	/*
+	 * The GPIO Interrupt register on the AEL2020 is a "Latching High"
+	 * (LH) register which is cleared to the current state when it's read.
+	 * Thus, we simply read the register and discard the result.
+	 */
+	unsigned int stat;
+	int err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, AEL2020_GPIO_INTR, &stat);
+	return err ? err : t3_phy_lasi_intr_clear(phy);
+}
+
+static const struct reg_val ael2020_reset_regs[] = {
+	/* Erratum #2: CDRLOL asserted, causing PMA link down status */
+	{ MDIO_MMD_PMAPMD, 0xc003, 0xffff, 0x3101 },
+
+	/* force XAUI to send LF when RX_LOS is asserted */
+	{ MDIO_MMD_PMAPMD, 0xcd40, 0xffff, 0x0001 },
+
+	/* allow writes to transceiver module EEPROM on i2c bus */
+	{ MDIO_MMD_PMAPMD, 0xff02, 0xffff, 0x0023 },
+	{ MDIO_MMD_PMAPMD, 0xff03, 0xffff, 0x0000 },
+	{ MDIO_MMD_PMAPMD, 0xff04, 0xffff, 0x0000 },
+
+	/* end */
+	{ 0, 0, 0, 0 }
+};
+/*
+ * Reset the PHY and put it into a canonical operating state.
+ */
+static int ael2020_reset(struct cphy *phy, int wait)
+{
+	int err;
+	unsigned int lasi_ctrl;
+
+	/* grab current interrupt state */
+	err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_CTRL,
+			   &lasi_ctrl);
+	if (err)
+		return err;
+
+	err = t3_phy_reset(phy, MDIO_MMD_PMAPMD, 125);
+	if (err)
+		return err;
+	msleep(100);
+
+	/* basic initialization for all module types */
+	phy->priv = edc_none;
+	err = set_phy_regs(phy, ael2020_reset_regs);
+	if (err)
+		return err;
+
+	/* determine module type and perform appropriate initialization */
+	err = ael2020_get_module_type(phy, 0);
+	if (err < 0)
+		return err;
+	phy->modtype = (u8)err;
+	if (err == phy_modtype_twinax || err == phy_modtype_twinax_long)
+		err = ael2020_setup_twinax_edc(phy, err);
+	else
+		err = ael2020_setup_sr_edc(phy);
+	if (err)
+		return err;
+
+	/* reset wipes out interrupts, reenable them if they were on */
+	if (lasi_ctrl & 1)
+		err = ael2005_intr_enable(phy);
+	return err;
+}
+
+/*
+ * Handle a PHY interrupt.
+ */
+static int ael2020_intr_handler(struct cphy *phy)
+{
+	unsigned int stat;
+	int ret, edc_needed, cause = 0;
+
+	ret = t3_mdio_read(phy, MDIO_MMD_PMAPMD, AEL2020_GPIO_INTR, &stat);
+	if (ret)
+		return ret;
+
+	if (stat & (0x1 << AEL2020_GPIO_MODDET)) {
+		/* modules have max 300 ms init time after hot plug */
+		ret = ael2020_get_module_type(phy, 300);
+		if (ret < 0)
+			return ret;
+
+		phy->modtype = (u8)ret;
+		if (ret == phy_modtype_none)
+			edc_needed = phy->priv;       /* on unplug retain EDC */
+		else if (ret == phy_modtype_twinax ||
+			 ret == phy_modtype_twinax_long)
+			edc_needed = edc_twinax;
+		else
+			edc_needed = edc_sr;
+
+		if (edc_needed != phy->priv) {
+			ret = ael2020_reset(phy, 0);
+			return ret ? ret : cphy_cause_module_change;
+		}
+		cause = cphy_cause_module_change;
+	}
+
+	ret = t3_phy_lasi_intr_handler(phy);
+	if (ret < 0)
+		return ret;
+
+	ret |= cause;
+	return ret ? ret : cphy_cause_link_change;
+}
+
+static struct cphy_ops ael2020_ops = {
+	.reset           = ael2020_reset,
+	.intr_enable     = ael2020_intr_enable,
+	.intr_disable    = ael2020_intr_disable,
+	.intr_clear      = ael2020_intr_clear,
+	.intr_handler    = ael2020_intr_handler,
+	.get_link_status = get_link_status_r,
+	.power_down      = ael1002_power_down,
+	.mmds		 = MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS | MDIO_DEVS_PHYXS,
+};
+
+int t3_ael2020_phy_prep(struct cphy *phy, struct adapter *adapter, int phy_addr,
+			const struct mdio_ops *mdio_ops)
+{
+	int err;
+
+	cphy_init(phy, adapter, phy_addr, &ael2020_ops, mdio_ops,
+		  SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_FIBRE |
+		  SUPPORTED_IRQ, "10GBASE-R");
+	msleep(125);
+
+	err = set_phy_regs(phy, ael2020_reset_regs);
+	if (err)
+		return err;
+	return 0;
+}
+
+/*
+ * Get link status for a 10GBASE-X device.
+ */
+static int get_link_status_x(struct cphy *phy, int *link_ok, int *speed,
+			     int *duplex, int *fc)
+{
+	if (link_ok) {
+		unsigned int stat0, stat1, stat2;
+		int err = t3_mdio_read(phy, MDIO_MMD_PMAPMD,
+				       MDIO_PMA_RXDET, &stat0);
+
+		if (!err)
+			err = t3_mdio_read(phy, MDIO_MMD_PCS,
+					   MDIO_PCS_10GBX_STAT1, &stat1);
+		if (!err)
+			err = t3_mdio_read(phy, MDIO_MMD_PHYXS,
+					   MDIO_PHYXS_LNSTAT, &stat2);
+		if (err)
+			return err;
+		*link_ok = (stat0 & (stat1 >> 12) & (stat2 >> 12)) & 1;
+	}
+	if (speed)
+		*speed = SPEED_10000;
+	if (duplex)
+		*duplex = DUPLEX_FULL;
+	return 0;
+}
+
+static struct cphy_ops qt2045_ops = {
+	.reset = ael1006_reset,
+	.intr_enable = t3_phy_lasi_intr_enable,
+	.intr_disable = t3_phy_lasi_intr_disable,
+	.intr_clear = t3_phy_lasi_intr_clear,
+	.intr_handler = t3_phy_lasi_intr_handler,
+	.get_link_status = get_link_status_x,
+	.power_down = ael1002_power_down,
+	.mmds = MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS | MDIO_DEVS_PHYXS,
+};
+
+int t3_qt2045_phy_prep(struct cphy *phy, struct adapter *adapter,
+		       int phy_addr, const struct mdio_ops *mdio_ops)
+{
+	unsigned int stat;
+
+	cphy_init(phy, adapter, phy_addr, &qt2045_ops, mdio_ops,
+		  SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_TP,
+		  "10GBASE-CX4");
+
+	/*
+	 * Some cards where the PHY is supposed to be at address 0 actually
+	 * have it at 1.
+	 */
+	if (!phy_addr &&
+	    !t3_mdio_read(phy, MDIO_MMD_PMAPMD, MDIO_STAT1, &stat) &&
+	    stat == 0xffff)
+		phy->mdio.prtad = 1;
+	return 0;
+}
+
+static int xaui_direct_reset(struct cphy *phy, int wait)
+{
+	return 0;
+}
+
+static int xaui_direct_get_link_status(struct cphy *phy, int *link_ok,
+				       int *speed, int *duplex, int *fc)
+{
+	if (link_ok) {
+		unsigned int status;
+		int prtad = phy->mdio.prtad;
+
+		status = t3_read_reg(phy->adapter,
+				     XGM_REG(A_XGM_SERDES_STAT0, prtad)) |
+		    t3_read_reg(phy->adapter,
+				    XGM_REG(A_XGM_SERDES_STAT1, prtad)) |
+		    t3_read_reg(phy->adapter,
+				XGM_REG(A_XGM_SERDES_STAT2, prtad)) |
+		    t3_read_reg(phy->adapter,
+				XGM_REG(A_XGM_SERDES_STAT3, prtad));
+		*link_ok = !(status & F_LOWSIG0);
+	}
+	if (speed)
+		*speed = SPEED_10000;
+	if (duplex)
+		*duplex = DUPLEX_FULL;
+	return 0;
+}
+
+static int xaui_direct_power_down(struct cphy *phy, int enable)
+{
+	return 0;
+}
+
+static struct cphy_ops xaui_direct_ops = {
+	.reset = xaui_direct_reset,
+	.intr_enable = ael1002_intr_noop,
+	.intr_disable = ael1002_intr_noop,
+	.intr_clear = ael1002_intr_noop,
+	.intr_handler = ael1002_intr_noop,
+	.get_link_status = xaui_direct_get_link_status,
+	.power_down = xaui_direct_power_down,
+};
+
+int t3_xaui_direct_phy_prep(struct cphy *phy, struct adapter *adapter,
+			    int phy_addr, const struct mdio_ops *mdio_ops)
+{
+	cphy_init(phy, adapter, phy_addr, &xaui_direct_ops, mdio_ops,
+		  SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_TP,
+		  "10GBASE-CX4");
+	return 0;
+}