Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov.

 2) Multiqueue support in xen-netback and xen-netfront, from Andrew J
    Benniston.

 3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn
    Mork.

 4) BPF now has a "random" opcode, from Chema Gonzalez.

 5) Add more BPF documentation and improve test framework, from Daniel
    Borkmann.

 6) Support TCP fastopen over ipv6, from Daniel Lee.

 7) Add software TSO helper functions and use them to support software
    TSO in mvneta and mv643xx_eth drivers.  From Ezequiel Garcia.

 8) Support software TSO in fec driver too, from Nimrod Andy.

 9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli.

10) Handle broadcasts more gracefully over macvlan when there are large
    numbers of interfaces configured, from Herbert Xu.

11) Allow more control over fwmark used for non-socket based responses,
    from Lorenzo Colitti.

12) Do TCP congestion window limiting based upon measurements, from Neal
    Cardwell.

13) Support busy polling in SCTP, from Neal Horman.

14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru.

15) Bridge promisc mode handling improvements from Vlad Yasevich.

16) Don't use inetpeer entries to implement ID generation any more, it
    performs poorly, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits)
  rtnetlink: fix userspace API breakage for iproute2 < v3.9.0
  tcp: fixing TLP's FIN recovery
  net: fec: Add software TSO support
  net: fec: Add Scatter/gather support
  net: fec: Increase buffer descriptor entry number
  net: fec: Factorize feature setting
  net: fec: Enable IP header hardware checksum
  net: fec: Factorize the .xmit transmit function
  bridge: fix compile error when compiling without IPv6 support
  bridge: fix smatch warning / potential null pointer dereference
  via-rhine: fix full-duplex with autoneg disable
  bnx2x: Enlarge the dorq threshold for VFs
  bnx2x: Check for UNDI in uncommon branch
  bnx2x: Fix 1G-baseT link
  bnx2x: Fix link for KR with swapped polarity lane
  sctp: Fix sk_ack_backlog wrap-around problem
  net/core: Add VF link state control policy
  net/fsl: xgmac_mdio is dependent on OF_MDIO
  net/fsl: Make xgmac_mdio read error message useful
  net_sched: drr: warn when qdisc is not work conserving
  ...

1 files changed, 40 insertions, 26 deletions

diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c
index 8c4b93be333..13723c96d1a 100644
--- a/drivers/net/ethernet/davicom/dm9000.c
+++ b/drivers/net/ethernet/davicom/dm9000.c
@@ -109,6 +109,7 @@ typedef struct board_info {
 	u8		imr_all;
 
 	unsigned int	flags;
+	unsigned int	in_timeout:1;
 	unsigned int	in_suspend:1;
 	unsigned int	wake_supported:1;
 
@@ -187,13 +188,13 @@ dm9000_reset(board_info_t *db)
 	 * The essential point is that we have to do a double reset, and the
 	 * instruction is to set LBK into MAC internal loopback mode.
 	 */
-	iow(db, DM9000_NCR, 0x03);
+	iow(db, DM9000_NCR, NCR_RST | NCR_MAC_LBK);
 	udelay(100); /* Application note says at least 20 us */
 	if (ior(db, DM9000_NCR) & 1)
 		dev_err(db->dev, "dm9000 did not respond to first reset\n");
 
 	iow(db, DM9000_NCR, 0);
-	iow(db, DM9000_NCR, 0x03);
+	iow(db, DM9000_NCR, NCR_RST | NCR_MAC_LBK);
 	udelay(100);
 	if (ior(db, DM9000_NCR) & 1)
 		dev_err(db->dev, "dm9000 did not respond to second reset\n");
@@ -273,7 +274,7 @@ static void dm9000_dumpblk_32bit(void __iomem *reg, int count)
  */
 static void dm9000_msleep(board_info_t *db, unsigned int ms)
 {
-	if (db->in_suspend)
+	if (db->in_suspend || db->in_timeout)
 		mdelay(ms);
 	else
 		msleep(ms);
@@ -334,7 +335,8 @@ dm9000_phy_write(struct net_device *dev,
 	unsigned long reg_save;
 
 	dm9000_dbg(db, 5, "phy_write[%02x] = %04x\n", reg, value);
-	mutex_lock(&db->addr_lock);
+	if (!db->in_timeout)
+		mutex_lock(&db->addr_lock);
 
 	spin_lock_irqsave(&db->lock, flags);
 
@@ -365,7 +367,8 @@ dm9000_phy_write(struct net_device *dev,
 	writeb(reg_save, db->io_addr);
 
 	spin_unlock_irqrestore(&db->lock, flags);
-	mutex_unlock(&db->addr_lock);
+	if (!db->in_timeout)
+		mutex_unlock(&db->addr_lock);
 }
 
 /* dm9000_set_io
@@ -882,6 +885,18 @@ dm9000_hash_table(struct net_device *dev)
 	spin_unlock_irqrestore(&db->lock, flags);
 }
 
+static void
+dm9000_mask_interrupts(board_info_t *db)
+{
+	iow(db, DM9000_IMR, IMR_PAR);
+}
+
+static void
+dm9000_unmask_interrupts(board_info_t *db)
+{
+	iow(db, DM9000_IMR, db->imr_all);
+}
+
 /*
  * Initialize dm9000 board
  */
@@ -894,6 +909,9 @@ dm9000_init_dm9000(struct net_device *dev)
 
 	dm9000_dbg(db, 1, "entering %s\n", __func__);
 
+	dm9000_reset(db);
+	dm9000_mask_interrupts(db);
+
 	/* I/O mode */
 	db->io_mode = ior(db, DM9000_ISR) >> 6;	/* ISR bit7:6 keeps I/O mode */
 
@@ -941,9 +959,6 @@ dm9000_init_dm9000(struct net_device *dev)
 
 	db->imr_all = imr;
 
-	/* Enable TX/RX interrupt mask */
-	iow(db, DM9000_IMR, imr);
-
 	/* Init Driver variable */
 	db->tx_pkt_cnt = 0;
 	db->queue_pkt_len = 0;
@@ -959,17 +974,19 @@ static void dm9000_timeout(struct net_device *dev)
 
 	/* Save previous register address */
 	spin_lock_irqsave(&db->lock, flags);
+	db->in_timeout = 1;
 	reg_save = readb(db->io_addr);
 
 	netif_stop_queue(dev);
-	dm9000_reset(db);
 	dm9000_init_dm9000(dev);
+	dm9000_unmask_interrupts(db);
 	/* We can accept TX packets again */
 	dev->trans_start = jiffies; /* prevent tx timeout */
 	netif_wake_queue(dev);
 
 	/* Restore previous register address */
 	writeb(reg_save, db->io_addr);
+	db->in_timeout = 0;
 	spin_unlock_irqrestore(&db->lock, flags);
 }
 
@@ -1093,7 +1110,6 @@ dm9000_rx(struct net_device *dev)
 		if (rxbyte & DM9000_PKT_ERR) {
 			dev_warn(db->dev, "status check fail: %d\n", rxbyte);
 			iow(db, DM9000_RCR, 0x00);	/* Stop Device */
-			iow(db, DM9000_ISR, IMR_PAR);	/* Stop INT request */
 			return;
 		}
 
@@ -1193,9 +1209,7 @@ static irqreturn_t dm9000_interrupt(int irq, void *dev_id)
 	/* Save previous register address */
 	reg_save = readb(db->io_addr);
 
-	/* Disable all interrupts */
-	iow(db, DM9000_IMR, IMR_PAR);
-
+	dm9000_mask_interrupts(db);
 	/* Got DM9000 interrupt status */
 	int_status = ior(db, DM9000_ISR);	/* Got ISR */
 	iow(db, DM9000_ISR, int_status);	/* Clear ISR status */
@@ -1218,9 +1232,7 @@ static irqreturn_t dm9000_interrupt(int irq, void *dev_id)
 		}
 	}
 
-	/* Re-enable interrupt mask */
-	iow(db, DM9000_IMR, db->imr_all);
-
+	dm9000_unmask_interrupts(db);
 	/* Restore previous register address */
 	writeb(reg_save, db->io_addr);
 
@@ -1292,6 +1304,9 @@ dm9000_open(struct net_device *dev)
 	 * may work, and tell the user that this is a problem */
 
 	if (irqflags == IRQF_TRIGGER_NONE)
+		irqflags = irq_get_trigger_type(dev->irq);
+
+	if (irqflags == IRQF_TRIGGER_NONE)
 		dev_warn(db->dev, "WARNING: no IRQ resource flags set.\n");
 
 	irqflags |= IRQF_SHARED;
@@ -1301,11 +1316,14 @@ dm9000_open(struct net_device *dev)
 	mdelay(1); /* delay needs by DM9000B */
 
 	/* Initialize DM9000 board */
-	dm9000_reset(db);
 	dm9000_init_dm9000(dev);
 
 	if (request_irq(dev->irq, dm9000_interrupt, irqflags, dev->name, dev))
 		return -EAGAIN;
+	/* Now that we have an interrupt handler hooked up we can unmask
+	 * our interrupts
+	 */
+	dm9000_unmask_interrupts(db);
 
 	/* Init driver variable */
 	db->dbug_cnt = 0;
@@ -1313,7 +1331,8 @@ dm9000_open(struct net_device *dev)
 	mii_check_media(&db->mii, netif_msg_link(db), 1);
 	netif_start_queue(dev);
 
-	dm9000_schedule_poll(db);
+	/* Poll initial link status */
+	schedule_delayed_work(&db->phy_poll, 1);
 
 	return 0;
 }
@@ -1326,7 +1345,7 @@ dm9000_shutdown(struct net_device *dev)
 	/* RESET device */
 	dm9000_phy_write(dev, 0, MII_BMCR, BMCR_RESET);	/* PHY RESET */
 	iow(db, DM9000_GPR, 0x01);	/* Power-Down PHY */
-	iow(db, DM9000_IMR, IMR_PAR);	/* Disable all interrupt */
+	dm9000_mask_interrupts(db);
 	iow(db, DM9000_RCR, 0x00);	/* Disable RX */
 }
 
@@ -1547,12 +1566,7 @@ dm9000_probe(struct platform_device *pdev)
 	db->flags |= DM9000_PLATF_SIMPLE_PHY;
 #endif
 
-	/* Fixing bug on dm9000_probe, takeover dm9000_reset(db),
-	 * Need 'NCR_MAC_LBK' bit to indeed stable our DM9000 fifo
-	 * while probe stage.
-	 */
-
-	iow(db, DM9000_NCR, NCR_MAC_LBK | NCR_RST);
+	dm9000_reset(db);
 
 	/* try multiple times, DM9000 sometimes gets the read wrong */
 	for (i = 0; i < 8; i++) {
@@ -1695,8 +1709,8 @@ dm9000_drv_resume(struct device *dev)
 			/* reset if we were not in wake mode to ensure if
 			 * the device was powered off it is in a known state */
 			if (!db->wake_state) {
-				dm9000_reset(db);
 				dm9000_init_dm9000(ndev);
+				dm9000_unmask_interrupts(db);
 			}
 
 			netif_device_attach(ndev);