dmfe: enforce consistent timing delay.

The driver does not always use the same timing for what looks like
the same operations.

- DCR0
  Use the same udelay everywhere for reset. Upper bound is 100 us.
- DCR9
  Use 5us delay for srom clock. 1us delay for phy_write_1bit (writes
  PHY_DATA_[01]) are not changed as they stay withing a 2,5MHz MDIO
  clock range.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Reviewed-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 5 insertions, 1 deletions

diff --git a/drivers/net/ethernet/dec/tulip/dmfe.c b/drivers/net/ethernet/dec/tulip/dmfe.c
index 0ef5b68acd0..4d6fe604fa6 100644
--- a/drivers/net/ethernet/dec/tulip/dmfe.c
+++ b/drivers/net/ethernet/dec/tulip/dmfe.c
@@ -767,7 +767,7 @@ static int dmfe_stop(struct DEVICE *dev)
 
 	/* Reset & stop DM910X board */
 	dw32(DCR0, DM910X_RESET);
-	udelay(5);
+	udelay(100);
 	phy_write(ioaddr, db->phy_addr, 0, 0x8000, db->chip_id);
 
 	/* free interrupt */
@@ -1601,7 +1601,9 @@ static u16 read_srom_word(void __iomem *ioaddr, int offset)
 	int i;
 
 	dw32(DCR9, CR9_SROM_READ);
+	udelay(5);
 	dw32(DCR9, CR9_SROM_READ | CR9_SRCS);
+	udelay(5);
 
 	/* Send the Read Command 110b */
 	srom_clk_write(ioaddr, SROM_DATA_1);
@@ -1615,6 +1617,7 @@ static u16 read_srom_word(void __iomem *ioaddr, int offset)
 	}
 
 	dw32(DCR9, CR9_SROM_READ | CR9_SRCS);
+	udelay(5);
 
 	for (i = 16; i > 0; i--) {
 		dw32(DCR9, CR9_SROM_READ | CR9_SRCS | CR9_SRCLK);
@@ -1626,6 +1629,7 @@ static u16 read_srom_word(void __iomem *ioaddr, int offset)
 	}
 
 	dw32(DCR9, CR9_SROM_READ);
+	udelay(5);
 	return srom_data;
 }