Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1745 commits)
  dp83640: free packet queues on remove
  dp83640: use proper function to free transmit time stamping packets
  ipv6: Do not use routes from locally generated RAs
  |PATCH net-next] tg3: add tx_dropped counter
  be2net: don't create multiple RX/TX rings in multi channel mode
  be2net: don't create multiple TXQs in BE2
  be2net: refactor VF setup/teardown code into be_vf_setup/clear()
  be2net: add vlan/rx-mode/flow-control config to be_setup()
  net_sched: cls_flow: use skb_header_pointer()
  ipv4: avoid useless call of the function check_peer_pmtu
  TCP: remove TCP_DEBUG
  net: Fix driver name for mdio-gpio.c
  ipv4: tcp: fix TOS value in ACK messages sent from TIME_WAIT
  rtnetlink: Add missing manual netlink notification in dev_change_net_namespaces
  ipv4: fix ipsec forward performance regression
  jme: fix irq storm after suspend/resume
  route: fix ICMP redirect validation
  net: hold sock reference while processing tx timestamps
  tcp: md5: add more const attributes
  Add ethtool -g support to virtio_net
  ...

Fix up conflicts in:
 - drivers/net/Kconfig:
	The split-up generated a trivial conflict with removal of a
	stale reference to Documentation/networking/net-modules.txt.
	Remove it from the new location instead.
 - fs/sysfs/dir.c:
	Fairly nasty conflicts with the sysfs rb-tree usage, conflicting
	with Eric Biederman's changes for tagged directories.

17 files changed, 19221 insertions, 0 deletions

diff --git a/drivers/net/ethernet/intel/igb/Makefile b/drivers/net/ethernet/intel/igb/Makefile
new file mode 100644
index 00000000000..c6e4621b626
--- /dev/null
+++ b/drivers/net/ethernet/intel/igb/Makefile
@@ -0,0 +1,37 @@
+################################################################################
+#
+# Intel 82575 PCI-Express Ethernet Linux driver
+# Copyright(c) 1999 - 2011 Intel Corporation.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms and conditions of the GNU General Public License,
+# version 2, as published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+# more details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# The full GNU General Public License is included in this distribution in
+# the file called "COPYING".
+#
+# Contact Information:
+# Linux NICS <linux.nics@intel.com>
+# e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+# Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+#
+################################################################################
+
+#
+# Makefile for the Intel(R) 82575 PCI-Express ethernet driver
+#
+
+obj-$(CONFIG_IGB) += igb.o
+
+igb-objs := igb_main.o igb_ethtool.o e1000_82575.o \
+	    e1000_mac.o e1000_nvm.o e1000_phy.o e1000_mbx.o
+
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
new file mode 100644
index 00000000000..7881fb95a25
--- /dev/null
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -0,0 +1,2101 @@
+/*******************************************************************************
+
+  Intel(R) Gigabit Ethernet Linux driver
+  Copyright(c) 2007-2011 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/* e1000_82575
+ * e1000_82576
+ */
+
+#include <linux/types.h>
+#include <linux/if_ether.h>
+
+#include "e1000_mac.h"
+#include "e1000_82575.h"
+
+static s32  igb_get_invariants_82575(struct e1000_hw *);
+static s32  igb_acquire_phy_82575(struct e1000_hw *);
+static void igb_release_phy_82575(struct e1000_hw *);
+static s32  igb_acquire_nvm_82575(struct e1000_hw *);
+static void igb_release_nvm_82575(struct e1000_hw *);
+static s32  igb_check_for_link_82575(struct e1000_hw *);
+static s32  igb_get_cfg_done_82575(struct e1000_hw *);
+static s32  igb_init_hw_82575(struct e1000_hw *);
+static s32  igb_phy_hw_reset_sgmii_82575(struct e1000_hw *);
+static s32  igb_read_phy_reg_sgmii_82575(struct e1000_hw *, u32, u16 *);
+static s32  igb_read_phy_reg_82580(struct e1000_hw *, u32, u16 *);
+static s32  igb_write_phy_reg_82580(struct e1000_hw *, u32, u16);
+static s32  igb_reset_hw_82575(struct e1000_hw *);
+static s32  igb_reset_hw_82580(struct e1000_hw *);
+static s32  igb_set_d0_lplu_state_82575(struct e1000_hw *, bool);
+static s32  igb_setup_copper_link_82575(struct e1000_hw *);
+static s32  igb_setup_serdes_link_82575(struct e1000_hw *);
+static s32  igb_write_phy_reg_sgmii_82575(struct e1000_hw *, u32, u16);
+static void igb_clear_hw_cntrs_82575(struct e1000_hw *);
+static s32  igb_acquire_swfw_sync_82575(struct e1000_hw *, u16);
+static s32  igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *, u16 *,
+						 u16 *);
+static s32  igb_get_phy_id_82575(struct e1000_hw *);
+static void igb_release_swfw_sync_82575(struct e1000_hw *, u16);
+static bool igb_sgmii_active_82575(struct e1000_hw *);
+static s32  igb_reset_init_script_82575(struct e1000_hw *);
+static s32  igb_read_mac_addr_82575(struct e1000_hw *);
+static s32  igb_set_pcie_completion_timeout(struct e1000_hw *hw);
+static s32  igb_reset_mdicnfg_82580(struct e1000_hw *hw);
+static s32  igb_validate_nvm_checksum_82580(struct e1000_hw *hw);
+static s32  igb_update_nvm_checksum_82580(struct e1000_hw *hw);
+static s32 igb_validate_nvm_checksum_i350(struct e1000_hw *hw);
+static s32 igb_update_nvm_checksum_i350(struct e1000_hw *hw);
+static const u16 e1000_82580_rxpbs_table[] =
+	{ 36, 72, 144, 1, 2, 4, 8, 16,
+	  35, 70, 140 };
+#define E1000_82580_RXPBS_TABLE_SIZE \
+	(sizeof(e1000_82580_rxpbs_table)/sizeof(u16))
+
+/**
+ *  igb_sgmii_uses_mdio_82575 - Determine if I2C pins are for external MDIO
+ *  @hw: pointer to the HW structure
+ *
+ *  Called to determine if the I2C pins are being used for I2C or as an
+ *  external MDIO interface since the two options are mutually exclusive.
+ **/
+static bool igb_sgmii_uses_mdio_82575(struct e1000_hw *hw)
+{
+	u32 reg = 0;
+	bool ext_mdio = false;
+
+	switch (hw->mac.type) {
+	case e1000_82575:
+	case e1000_82576:
+		reg = rd32(E1000_MDIC);
+		ext_mdio = !!(reg & E1000_MDIC_DEST);
+		break;
+	case e1000_82580:
+	case e1000_i350:
+		reg = rd32(E1000_MDICNFG);
+		ext_mdio = !!(reg & E1000_MDICNFG_EXT_MDIO);
+		break;
+	default:
+		break;
+	}
+	return ext_mdio;
+}
+
+static s32 igb_get_invariants_82575(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	struct e1000_mac_info *mac = &hw->mac;
+	struct e1000_dev_spec_82575 * dev_spec = &hw->dev_spec._82575;
+	u32 eecd;
+	s32 ret_val;
+	u16 size;
+	u32 ctrl_ext = 0;
+
+	switch (hw->device_id) {
+	case E1000_DEV_ID_82575EB_COPPER:
+	case E1000_DEV_ID_82575EB_FIBER_SERDES:
+	case E1000_DEV_ID_82575GB_QUAD_COPPER:
+		mac->type = e1000_82575;
+		break;
+	case E1000_DEV_ID_82576:
+	case E1000_DEV_ID_82576_NS:
+	case E1000_DEV_ID_82576_NS_SERDES:
+	case E1000_DEV_ID_82576_FIBER:
+	case E1000_DEV_ID_82576_SERDES:
+	case E1000_DEV_ID_82576_QUAD_COPPER:
+	case E1000_DEV_ID_82576_QUAD_COPPER_ET2:
+	case E1000_DEV_ID_82576_SERDES_QUAD:
+		mac->type = e1000_82576;
+		break;
+	case E1000_DEV_ID_82580_COPPER:
+	case E1000_DEV_ID_82580_FIBER:
+	case E1000_DEV_ID_82580_QUAD_FIBER:
+	case E1000_DEV_ID_82580_SERDES:
+	case E1000_DEV_ID_82580_SGMII:
+	case E1000_DEV_ID_82580_COPPER_DUAL:
+	case E1000_DEV_ID_DH89XXCC_SGMII:
+	case E1000_DEV_ID_DH89XXCC_SERDES:
+	case E1000_DEV_ID_DH89XXCC_BACKPLANE:
+	case E1000_DEV_ID_DH89XXCC_SFP:
+		mac->type = e1000_82580;
+		break;
+	case E1000_DEV_ID_I350_COPPER:
+	case E1000_DEV_ID_I350_FIBER:
+	case E1000_DEV_ID_I350_SERDES:
+	case E1000_DEV_ID_I350_SGMII:
+		mac->type = e1000_i350;
+		break;
+	default:
+		return -E1000_ERR_MAC_INIT;
+		break;
+	}
+
+	/* Set media type */
+	/*
+	 * The 82575 uses bits 22:23 for link mode. The mode can be changed
+	 * based on the EEPROM. We cannot rely upon device ID. There
+	 * is no distinguishable difference between fiber and internal
+	 * SerDes mode on the 82575. There can be an external PHY attached
+	 * on the SGMII interface. For this, we'll set sgmii_active to true.
+	 */
+	phy->media_type = e1000_media_type_copper;
+	dev_spec->sgmii_active = false;
+
+	ctrl_ext = rd32(E1000_CTRL_EXT);
+	switch (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK) {
+	case E1000_CTRL_EXT_LINK_MODE_SGMII:
+		dev_spec->sgmii_active = true;
+		break;
+	case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX:
+	case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES:
+		hw->phy.media_type = e1000_media_type_internal_serdes;
+		break;
+	default:
+		break;
+	}
+
+	/* Set mta register count */
+	mac->mta_reg_count = 128;
+	/* Set rar entry count */
+	mac->rar_entry_count = E1000_RAR_ENTRIES_82575;
+	if (mac->type == e1000_82576)
+		mac->rar_entry_count = E1000_RAR_ENTRIES_82576;
+	if (mac->type == e1000_82580)
+		mac->rar_entry_count = E1000_RAR_ENTRIES_82580;
+	if (mac->type == e1000_i350)
+		mac->rar_entry_count = E1000_RAR_ENTRIES_I350;
+	/* reset */
+	if (mac->type >= e1000_82580)
+		mac->ops.reset_hw = igb_reset_hw_82580;
+	else
+		mac->ops.reset_hw = igb_reset_hw_82575;
+	/* Set if part includes ASF firmware */
+	mac->asf_firmware_present = true;
+	/* Set if manageability features are enabled. */
+	mac->arc_subsystem_valid =
+		(rd32(E1000_FWSM) & E1000_FWSM_MODE_MASK)
+			? true : false;
+	/* enable EEE on i350 parts */
+	if (mac->type == e1000_i350)
+		dev_spec->eee_disable = false;
+	else
+		dev_spec->eee_disable = true;
+	/* physical interface link setup */
+	mac->ops.setup_physical_interface =
+		(hw->phy.media_type == e1000_media_type_copper)
+			? igb_setup_copper_link_82575
+			: igb_setup_serdes_link_82575;
+
+	/* NVM initialization */
+	eecd = rd32(E1000_EECD);
+
+	nvm->opcode_bits        = 8;
+	nvm->delay_usec         = 1;
+	switch (nvm->override) {
+	case e1000_nvm_override_spi_large:
+		nvm->page_size    = 32;
+		nvm->address_bits = 16;
+		break;
+	case e1000_nvm_override_spi_small:
+		nvm->page_size    = 8;
+		nvm->address_bits = 8;
+		break;
+	default:
+		nvm->page_size    = eecd & E1000_EECD_ADDR_BITS ? 32 : 8;
+		nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ? 16 : 8;
+		break;
+	}
+
+	nvm->type = e1000_nvm_eeprom_spi;
+
+	size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >>
+		     E1000_EECD_SIZE_EX_SHIFT);
+
+	/*
+	 * Added to a constant, "size" becomes the left-shift value
+	 * for setting word_size.
+	 */
+	size += NVM_WORD_SIZE_BASE_SHIFT;
+
+	/*
+	 * Check for invalid size
+	 */
+	if ((hw->mac.type == e1000_82576) && (size > 15)) {
+		printk("igb: The NVM size is not valid, "
+			"defaulting to 32K.\n");
+		size = 15;
+	}
+	nvm->word_size = 1 << size;
+	if (nvm->word_size == (1 << 15))
+		nvm->page_size = 128;
+
+	/* NVM Function Pointers */
+	nvm->ops.acquire = igb_acquire_nvm_82575;
+	if (nvm->word_size < (1 << 15))
+		nvm->ops.read = igb_read_nvm_eerd;
+	else
+		nvm->ops.read = igb_read_nvm_spi;
+
+	nvm->ops.release = igb_release_nvm_82575;
+	switch (hw->mac.type) {
+	case e1000_82580:
+		nvm->ops.validate = igb_validate_nvm_checksum_82580;
+		nvm->ops.update = igb_update_nvm_checksum_82580;
+		break;
+	case e1000_i350:
+		nvm->ops.validate = igb_validate_nvm_checksum_i350;
+		nvm->ops.update = igb_update_nvm_checksum_i350;
+		break;
+	default:
+		nvm->ops.validate = igb_validate_nvm_checksum;
+		nvm->ops.update = igb_update_nvm_checksum;
+	}
+	nvm->ops.write = igb_write_nvm_spi;
+
+	/* if part supports SR-IOV then initialize mailbox parameters */
+	switch (mac->type) {
+	case e1000_82576:
+	case e1000_i350:
+		igb_init_mbx_params_pf(hw);
+		break;
+	default:
+		break;
+	}
+
+	/* setup PHY parameters */
+	if (phy->media_type != e1000_media_type_copper) {
+		phy->type = e1000_phy_none;
+		return 0;
+	}
+
+	phy->autoneg_mask        = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+	phy->reset_delay_us      = 100;
+
+	ctrl_ext = rd32(E1000_CTRL_EXT);
+
+	/* PHY function pointers */
+	if (igb_sgmii_active_82575(hw)) {
+		phy->ops.reset      = igb_phy_hw_reset_sgmii_82575;
+		ctrl_ext |= E1000_CTRL_I2C_ENA;
+	} else {
+		phy->ops.reset      = igb_phy_hw_reset;
+		ctrl_ext &= ~E1000_CTRL_I2C_ENA;
+	}
+
+	wr32(E1000_CTRL_EXT, ctrl_ext);
+	igb_reset_mdicnfg_82580(hw);
+
+	if (igb_sgmii_active_82575(hw) && !igb_sgmii_uses_mdio_82575(hw)) {
+		phy->ops.read_reg   = igb_read_phy_reg_sgmii_82575;
+		phy->ops.write_reg  = igb_write_phy_reg_sgmii_82575;
+	} else if (hw->mac.type >= e1000_82580) {
+		phy->ops.read_reg   = igb_read_phy_reg_82580;
+		phy->ops.write_reg  = igb_write_phy_reg_82580;
+	} else {
+		phy->ops.read_reg   = igb_read_phy_reg_igp;
+		phy->ops.write_reg  = igb_write_phy_reg_igp;
+	}
+
+	/* set lan id */
+	hw->bus.func = (rd32(E1000_STATUS) & E1000_STATUS_FUNC_MASK) >>
+	               E1000_STATUS_FUNC_SHIFT;
+
+	/* Set phy->phy_addr and phy->id. */
+	ret_val = igb_get_phy_id_82575(hw);
+	if (ret_val)
+		return ret_val;
+
+	/* Verify phy id and set remaining function pointers */
+	switch (phy->id) {
+	case I347AT4_E_PHY_ID:
+	case M88E1112_E_PHY_ID:
+	case M88E1111_I_PHY_ID:
+		phy->type                   = e1000_phy_m88;
+		phy->ops.get_phy_info       = igb_get_phy_info_m88;
+
+		if (phy->id == I347AT4_E_PHY_ID ||
+		    phy->id == M88E1112_E_PHY_ID)
+			phy->ops.get_cable_length = igb_get_cable_length_m88_gen2;
+		else
+			phy->ops.get_cable_length = igb_get_cable_length_m88;
+
+		phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_m88;
+		break;
+	case IGP03E1000_E_PHY_ID:
+		phy->type                   = e1000_phy_igp_3;
+		phy->ops.get_phy_info       = igb_get_phy_info_igp;
+		phy->ops.get_cable_length   = igb_get_cable_length_igp_2;
+		phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_igp;
+		phy->ops.set_d0_lplu_state  = igb_set_d0_lplu_state_82575;
+		phy->ops.set_d3_lplu_state  = igb_set_d3_lplu_state;
+		break;
+	case I82580_I_PHY_ID:
+	case I350_I_PHY_ID:
+		phy->type                   = e1000_phy_82580;
+		phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_82580;
+		phy->ops.get_cable_length   = igb_get_cable_length_82580;
+		phy->ops.get_phy_info       = igb_get_phy_info_82580;
+		break;
+	default:
+		return -E1000_ERR_PHY;
+	}
+
+	return 0;
+}
+
+/**
+ *  igb_acquire_phy_82575 - Acquire rights to access PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  Acquire access rights to the correct PHY.  This is a
+ *  function pointer entry point called by the api module.
+ **/
+static s32 igb_acquire_phy_82575(struct e1000_hw *hw)
+{
+	u16 mask = E1000_SWFW_PHY0_SM;
+
+	if (hw->bus.func == E1000_FUNC_1)
+		mask = E1000_SWFW_PHY1_SM;
+	else if (hw->bus.func == E1000_FUNC_2)
+		mask = E1000_SWFW_PHY2_SM;
+	else if (hw->bus.func == E1000_FUNC_3)
+		mask = E1000_SWFW_PHY3_SM;
+
+	return igb_acquire_swfw_sync_82575(hw, mask);
+}
+
+/**
+ *  igb_release_phy_82575 - Release rights to access PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  A wrapper to release access rights to the correct PHY.  This is a
+ *  function pointer entry point called by the api module.
+ **/
+static void igb_release_phy_82575(struct e1000_hw *hw)
+{
+	u16 mask = E1000_SWFW_PHY0_SM;
+
+	if (hw->bus.func == E1000_FUNC_1)
+		mask = E1000_SWFW_PHY1_SM;
+	else if (hw->bus.func == E1000_FUNC_2)
+		mask = E1000_SWFW_PHY2_SM;
+	else if (hw->bus.func == E1000_FUNC_3)
+		mask = E1000_SWFW_PHY3_SM;
+
+	igb_release_swfw_sync_82575(hw, mask);
+}
+
+/**
+ *  igb_read_phy_reg_sgmii_82575 - Read PHY register using sgmii
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Reads the PHY register at offset using the serial gigabit media independent
+ *  interface and stores the retrieved information in data.
+ **/
+static s32 igb_read_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset,
+					  u16 *data)
+{
+	s32 ret_val = -E1000_ERR_PARAM;
+
+	if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) {
+		hw_dbg("PHY Address %u is out of range\n", offset);
+		goto out;
+	}
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		goto out;
+
+	ret_val = igb_read_phy_reg_i2c(hw, offset, data);
+
+	hw->phy.ops.release(hw);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_write_phy_reg_sgmii_82575 - Write PHY register using sgmii
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Writes the data to PHY register at the offset using the serial gigabit
+ *  media independent interface.
+ **/
+static s32 igb_write_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset,
+					   u16 data)
+{
+	s32 ret_val = -E1000_ERR_PARAM;
+
+
+	if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) {
+		hw_dbg("PHY Address %d is out of range\n", offset);
+		goto out;
+	}
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		goto out;
+
+	ret_val = igb_write_phy_reg_i2c(hw, offset, data);
+
+	hw->phy.ops.release(hw);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_get_phy_id_82575 - Retrieve PHY addr and id
+ *  @hw: pointer to the HW structure
+ *
+ *  Retrieves the PHY address and ID for both PHY's which do and do not use
+ *  sgmi interface.
+ **/
+static s32 igb_get_phy_id_82575(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32  ret_val = 0;
+	u16 phy_id;
+	u32 ctrl_ext;
+	u32 mdic;
+
+	/*
+	 * For SGMII PHYs, we try the list of possible addresses until
+	 * we find one that works.  For non-SGMII PHYs
+	 * (e.g. integrated copper PHYs), an address of 1 should
+	 * work.  The result of this function should mean phy->phy_addr
+	 * and phy->id are set correctly.
+	 */
+	if (!(igb_sgmii_active_82575(hw))) {
+		phy->addr = 1;
+		ret_val = igb_get_phy_id(hw);
+		goto out;
+	}
+
+	if (igb_sgmii_uses_mdio_82575(hw)) {
+		switch (hw->mac.type) {
+		case e1000_82575:
+		case e1000_82576:
+			mdic = rd32(E1000_MDIC);
+			mdic &= E1000_MDIC_PHY_MASK;
+			phy->addr = mdic >> E1000_MDIC_PHY_SHIFT;
+			break;
+		case e1000_82580:
+		case e1000_i350:
+			mdic = rd32(E1000_MDICNFG);
+			mdic &= E1000_MDICNFG_PHY_MASK;
+			phy->addr = mdic >> E1000_MDICNFG_PHY_SHIFT;
+			break;
+		default:
+			ret_val = -E1000_ERR_PHY;
+			goto out;
+			break;
+		}
+		ret_val = igb_get_phy_id(hw);
+		goto out;
+	}
+
+	/* Power on sgmii phy if it is disabled */
+	ctrl_ext = rd32(E1000_CTRL_EXT);
+	wr32(E1000_CTRL_EXT, ctrl_ext & ~E1000_CTRL_EXT_SDP3_DATA);
+	wrfl();
+	msleep(300);
+
+	/*
+	 * The address field in the I2CCMD register is 3 bits and 0 is invalid.
+	 * Therefore, we need to test 1-7
+	 */
+	for (phy->addr = 1; phy->addr < 8; phy->addr++) {
+		ret_val = igb_read_phy_reg_sgmii_82575(hw, PHY_ID1, &phy_id);
+		if (ret_val == 0) {
+			hw_dbg("Vendor ID 0x%08X read at address %u\n",
+			       phy_id, phy->addr);
+			/*
+			 * At the time of this writing, The M88 part is
+			 * the only supported SGMII PHY product.
+			 */
+			if (phy_id == M88_VENDOR)
+				break;
+		} else {
+			hw_dbg("PHY address %u was unreadable\n", phy->addr);
+		}
+	}
+
+	/* A valid PHY type couldn't be found. */
+	if (phy->addr == 8) {
+		phy->addr = 0;
+		ret_val = -E1000_ERR_PHY;
+		goto out;
+	} else {
+		ret_val = igb_get_phy_id(hw);
+	}
+
+	/* restore previous sfp cage power state */
+	wr32(E1000_CTRL_EXT, ctrl_ext);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_phy_hw_reset_sgmii_82575 - Performs a PHY reset
+ *  @hw: pointer to the HW structure
+ *
+ *  Resets the PHY using the serial gigabit media independent interface.
+ **/
+static s32 igb_phy_hw_reset_sgmii_82575(struct e1000_hw *hw)
+{
+	s32 ret_val;
+
+	/*
+	 * This isn't a true "hard" reset, but is the only reset
+	 * available to us at this time.
+	 */
+
+	hw_dbg("Soft resetting SGMII attached PHY...\n");
+
+	/*
+	 * SFP documentation requires the following to configure the SPF module
+	 * to work on SGMII.  No further documentation is given.
+	 */
+	ret_val = hw->phy.ops.write_reg(hw, 0x1B, 0x8084);
+	if (ret_val)
+		goto out;
+
+	ret_val = igb_phy_sw_reset(hw);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_set_d0_lplu_state_82575 - Set Low Power Linkup D0 state
+ *  @hw: pointer to the HW structure
+ *  @active: true to enable LPLU, false to disable
+ *
+ *  Sets the LPLU D0 state according to the active flag.  When
+ *  activating LPLU this function also disables smart speed
+ *  and vice versa.  LPLU will not be activated unless the
+ *  device autonegotiation advertisement meets standards of
+ *  either 10 or 10/100 or 10/100/1000 at all duplexes.
+ *  This is a function pointer entry point only called by
+ *  PHY setup routines.
+ **/
+static s32 igb_set_d0_lplu_state_82575(struct e1000_hw *hw, bool active)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+
+	ret_val = phy->ops.read_reg(hw, IGP02E1000_PHY_POWER_MGMT, &data);
+	if (ret_val)
+		goto out;
+
+	if (active) {
+		data |= IGP02E1000_PM_D0_LPLU;
+		ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT,
+						 data);
+		if (ret_val)
+			goto out;
+
+		/* When LPLU is enabled, we should disable SmartSpeed */
+		ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+						&data);
+		data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+		ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+						 data);
+		if (ret_val)
+			goto out;
+	} else {
+		data &= ~IGP02E1000_PM_D0_LPLU;
+		ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT,
+						 data);
+		/*
+		 * LPLU and SmartSpeed are mutually exclusive.  LPLU is used
+		 * during Dx states where the power conservation is most
+		 * important.  During driver activity we should enable
+		 * SmartSpeed, so performance is maintained.
+		 */
+		if (phy->smart_speed == e1000_smart_speed_on) {
+			ret_val = phy->ops.read_reg(hw,
+					IGP01E1000_PHY_PORT_CONFIG, &data);
+			if (ret_val)
+				goto out;
+
+			data |= IGP01E1000_PSCFR_SMART_SPEED;
+			ret_val = phy->ops.write_reg(hw,
+					IGP01E1000_PHY_PORT_CONFIG, data);
+			if (ret_val)
+				goto out;
+		} else if (phy->smart_speed == e1000_smart_speed_off) {
+			ret_val = phy->ops.read_reg(hw,
+					IGP01E1000_PHY_PORT_CONFIG, &data);
+			if (ret_val)
+				goto out;
+
+			data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+			ret_val = phy->ops.write_reg(hw,
+					IGP01E1000_PHY_PORT_CONFIG, data);
+			if (ret_val)
+				goto out;
+		}
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_acquire_nvm_82575 - Request for access to EEPROM
+ *  @hw: pointer to the HW structure
+ *
+ *  Acquire the necessary semaphores for exclusive access to the EEPROM.
+ *  Set the EEPROM access request bit and wait for EEPROM access grant bit.
+ *  Return successful if access grant bit set, else clear the request for
+ *  EEPROM access and return -E1000_ERR_NVM (-1).
+ **/
+static s32 igb_acquire_nvm_82575(struct e1000_hw *hw)
+{
+	s32 ret_val;
+
+	ret_val = igb_acquire_swfw_sync_82575(hw, E1000_SWFW_EEP_SM);
+	if (ret_val)
+		goto out;
+
+	ret_val = igb_acquire_nvm(hw);
+
+	if (ret_val)
+		igb_release_swfw_sync_82575(hw, E1000_SWFW_EEP_SM);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_release_nvm_82575 - Release exclusive access to EEPROM
+ *  @hw: pointer to the HW structure
+ *
+ *  Stop any current commands to the EEPROM and clear the EEPROM request bit,
+ *  then release the semaphores acquired.
+ **/
+static void igb_release_nvm_82575(struct e1000_hw *hw)
+{
+	igb_release_nvm(hw);
+	igb_release_swfw_sync_82575(hw, E1000_SWFW_EEP_SM);
+}
+
+/**
+ *  igb_acquire_swfw_sync_82575 - Acquire SW/FW semaphore
+ *  @hw: pointer to the HW structure
+ *  @mask: specifies which semaphore to acquire
+ *
+ *  Acquire the SW/FW semaphore to access the PHY or NVM.  The mask
+ *  will also specify which port we're acquiring the lock for.
+ **/
+static s32 igb_acquire_swfw_sync_82575(struct e1000_hw *hw, u16 mask)
+{
+	u32 swfw_sync;
+	u32 swmask = mask;
+	u32 fwmask = mask << 16;
+	s32 ret_val = 0;
+	s32 i = 0, timeout = 200; /* FIXME: find real value to use here */
+
+	while (i < timeout) {
+		if (igb_get_hw_semaphore(hw)) {
+			ret_val = -E1000_ERR_SWFW_SYNC;
+			goto out;
+		}
+
+		swfw_sync = rd32(E1000_SW_FW_SYNC);
+		if (!(swfw_sync & (fwmask | swmask)))
+			break;
+
+		/*
+		 * Firmware currently using resource (fwmask)
+		 * or other software thread using resource (swmask)
+		 */
+		igb_put_hw_semaphore(hw);
+		mdelay(5);
+		i++;
+	}
+
+	if (i == timeout) {
+		hw_dbg("Driver can't access resource, SW_FW_SYNC timeout.\n");
+		ret_val = -E1000_ERR_SWFW_SYNC;
+		goto out;
+	}
+
+	swfw_sync |= swmask;
+	wr32(E1000_SW_FW_SYNC, swfw_sync);
+
+	igb_put_hw_semaphore(hw);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_release_swfw_sync_82575 - Release SW/FW semaphore
+ *  @hw: pointer to the HW structure
+ *  @mask: specifies which semaphore to acquire
+ *
+ *  Release the SW/FW semaphore used to access the PHY or NVM.  The mask
+ *  will also specify which port we're releasing the lock for.
+ **/
+static void igb_release_swfw_sync_82575(struct e1000_hw *hw, u16 mask)
+{
+	u32 swfw_sync;
+
+	while (igb_get_hw_semaphore(hw) != 0);
+	/* Empty */
+
+	swfw_sync = rd32(E1000_SW_FW_SYNC);
+	swfw_sync &= ~mask;
+	wr32(E1000_SW_FW_SYNC, swfw_sync);
+
+	igb_put_hw_semaphore(hw);
+}
+
+/**
+ *  igb_get_cfg_done_82575 - Read config done bit
+ *  @hw: pointer to the HW structure
+ *
+ *  Read the management control register for the config done bit for
+ *  completion status.  NOTE: silicon which is EEPROM-less will fail trying
+ *  to read the config done bit, so an error is *ONLY* logged and returns
+ *  0.  If we were to return with error, EEPROM-less silicon
+ *  would not be able to be reset or change link.
+ **/
+static s32 igb_get_cfg_done_82575(struct e1000_hw *hw)
+{
+	s32 timeout = PHY_CFG_TIMEOUT;
+	s32 ret_val = 0;
+	u32 mask = E1000_NVM_CFG_DONE_PORT_0;
+
+	if (hw->bus.func == 1)
+		mask = E1000_NVM_CFG_DONE_PORT_1;
+	else if (hw->bus.func == E1000_FUNC_2)
+		mask = E1000_NVM_CFG_DONE_PORT_2;
+	else if (hw->bus.func == E1000_FUNC_3)
+		mask = E1000_NVM_CFG_DONE_PORT_3;
+
+	while (timeout) {
+		if (rd32(E1000_EEMNGCTL) & mask)
+			break;
+		msleep(1);
+		timeout--;
+	}
+	if (!timeout)
+		hw_dbg("MNG configuration cycle has not completed.\n");
+
+	/* If EEPROM is not marked present, init the PHY manually */
+	if (((rd32(E1000_EECD) & E1000_EECD_PRES) == 0) &&
+	    (hw->phy.type == e1000_phy_igp_3))
+		igb_phy_init_script_igp3(hw);
+
+	return ret_val;
+}
+
+/**
+ *  igb_check_for_link_82575 - Check for link
+ *  @hw: pointer to the HW structure
+ *
+ *  If sgmii is enabled, then use the pcs register to determine link, otherwise
+ *  use the generic interface for determining link.
+ **/
+static s32 igb_check_for_link_82575(struct e1000_hw *hw)
+{
+	s32 ret_val;
+	u16 speed, duplex;
+
+	if (hw->phy.media_type != e1000_media_type_copper) {
+		ret_val = igb_get_pcs_speed_and_duplex_82575(hw, &speed,
+		                                             &duplex);
+		/*
+		 * Use this flag to determine if link needs to be checked or
+		 * not.  If  we have link clear the flag so that we do not
+		 * continue to check for link.
+		 */
+		hw->mac.get_link_status = !hw->mac.serdes_has_link;
+	} else {
+		ret_val = igb_check_for_copper_link(hw);
+	}
+
+	return ret_val;
+}
+
+/**
+ *  igb_power_up_serdes_link_82575 - Power up the serdes link after shutdown
+ *  @hw: pointer to the HW structure
+ **/
+void igb_power_up_serdes_link_82575(struct e1000_hw *hw)
+{
+	u32 reg;
+
+
+	if ((hw->phy.media_type != e1000_media_type_internal_serdes) &&
+	    !igb_sgmii_active_82575(hw))
+		return;
+
+	/* Enable PCS to turn on link */
+	reg = rd32(E1000_PCS_CFG0);
+	reg |= E1000_PCS_CFG_PCS_EN;
+	wr32(E1000_PCS_CFG0, reg);
+
+	/* Power up the laser */
+	reg = rd32(E1000_CTRL_EXT);
+	reg &= ~E1000_CTRL_EXT_SDP3_DATA;
+	wr32(E1000_CTRL_EXT, reg);
+
+	/* flush the write to verify completion */
+	wrfl();
+	msleep(1);
+}
+
+/**
+ *  igb_get_pcs_speed_and_duplex_82575 - Retrieve current speed/duplex
+ *  @hw: pointer to the HW structure
+ *  @speed: stores the current speed
+ *  @duplex: stores the current duplex
+ *
+ *  Using the physical coding sub-layer (PCS), retrieve the current speed and
+ *  duplex, then store the values in the pointers provided.
+ **/
+static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, u16 *speed,
+						u16 *duplex)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	u32 pcs;
+
+	/* Set up defaults for the return values of this function */
+	mac->serdes_has_link = false;
+	*speed = 0;
+	*duplex = 0;
+
+	/*
+	 * Read the PCS Status register for link state. For non-copper mode,
+	 * the status register is not accurate. The PCS status register is
+	 * used instead.
+	 */
+	pcs = rd32(E1000_PCS_LSTAT);
+
+	/*
+	 * The link up bit determines when link is up on autoneg. The sync ok
+	 * gets set once both sides sync up and agree upon link. Stable link
+	 * can be determined by checking for both link up and link sync ok
+	 */
+	if ((pcs & E1000_PCS_LSTS_LINK_OK) && (pcs & E1000_PCS_LSTS_SYNK_OK)) {
+		mac->serdes_has_link = true;
+
+		/* Detect and store PCS speed */
+		if (pcs & E1000_PCS_LSTS_SPEED_1000) {
+			*speed = SPEED_1000;
+		} else if (pcs & E1000_PCS_LSTS_SPEED_100) {
+			*speed = SPEED_100;
+		} else {
+			*speed = SPEED_10;
+		}
+
+		/* Detect and store PCS duplex */
+		if (pcs & E1000_PCS_LSTS_DUPLEX_FULL) {
+			*duplex = FULL_DUPLEX;
+		} else {
+			*duplex = HALF_DUPLEX;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ *  igb_shutdown_serdes_link_82575 - Remove link during power down
+ *  @hw: pointer to the HW structure
+ *
+ *  In the case of fiber serdes, shut down optics and PCS on driver unload
+ *  when management pass thru is not enabled.
+ **/
+void igb_shutdown_serdes_link_82575(struct e1000_hw *hw)
+{
+	u32 reg;
+
+	if (hw->phy.media_type != e1000_media_type_internal_serdes &&
+	    igb_sgmii_active_82575(hw))
+		return;
+
+	if (!igb_enable_mng_pass_thru(hw)) {
+		/* Disable PCS to turn off link */
+		reg = rd32(E1000_PCS_CFG0);
+		reg &= ~E1000_PCS_CFG_PCS_EN;
+		wr32(E1000_PCS_CFG0, reg);
+
+		/* shutdown the laser */
+		reg = rd32(E1000_CTRL_EXT);
+		reg |= E1000_CTRL_EXT_SDP3_DATA;
+		wr32(E1000_CTRL_EXT, reg);
+
+		/* flush the write to verify completion */
+		wrfl();
+		msleep(1);
+	}
+}
+
+/**
+ *  igb_reset_hw_82575 - Reset hardware
+ *  @hw: pointer to the HW structure
+ *
+ *  This resets the hardware into a known state.  This is a
+ *  function pointer entry point called by the api module.
+ **/
+static s32 igb_reset_hw_82575(struct e1000_hw *hw)
+{
+	u32 ctrl, icr;
+	s32 ret_val;
+
+	/*
+	 * Prevent the PCI-E bus from sticking if there is no TLP connection
+	 * on the last TLP read/write transaction when MAC is reset.
+	 */
+	ret_val = igb_disable_pcie_master(hw);
+	if (ret_val)
+		hw_dbg("PCI-E Master disable polling has failed.\n");
+
+	/* set the completion timeout for interface */
+	ret_val = igb_set_pcie_completion_timeout(hw);
+	if (ret_val) {
+		hw_dbg("PCI-E Set completion timeout has failed.\n");
+	}
+
+	hw_dbg("Masking off all interrupts\n");
+	wr32(E1000_IMC, 0xffffffff);
+
+	wr32(E1000_RCTL, 0);
+	wr32(E1000_TCTL, E1000_TCTL_PSP);
+	wrfl();
+
+	msleep(10);
+
+	ctrl = rd32(E1000_CTRL);
+
+	hw_dbg("Issuing a global reset to MAC\n");
+	wr32(E1000_CTRL, ctrl | E1000_CTRL_RST);
+
+	ret_val = igb_get_auto_rd_done(hw);
+	if (ret_val) {
+		/*
+		 * When auto config read does not complete, do not
+		 * return with an error. This can happen in situations
+		 * where there is no eeprom and prevents getting link.
+		 */
+		hw_dbg("Auto Read Done did not complete\n");
+	}
+
+	/* If EEPROM is not present, run manual init scripts */
+	if ((rd32(E1000_EECD) & E1000_EECD_PRES) == 0)
+		igb_reset_init_script_82575(hw);
+
+	/* Clear any pending interrupt events. */
+	wr32(E1000_IMC, 0xffffffff);
+	icr = rd32(E1000_ICR);
+
+	/* Install any alternate MAC address into RAR0 */
+	ret_val = igb_check_alt_mac_addr(hw);
+
+	return ret_val;
+}
+
+/**
+ *  igb_init_hw_82575 - Initialize hardware
+ *  @hw: pointer to the HW structure
+ *
+ *  This inits the hardware readying it for operation.
+ **/
+static s32 igb_init_hw_82575(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	s32 ret_val;
+	u16 i, rar_count = mac->rar_entry_count;
+
+	/* Initialize identification LED */
+	ret_val = igb_id_led_init(hw);
+	if (ret_val) {
+		hw_dbg("Error initializing identification LED\n");
+		/* This is not fatal and we should not stop init due to this */
+	}
+
+	/* Disabling VLAN filtering */
+	hw_dbg("Initializing the IEEE VLAN\n");
+	if (hw->mac.type == e1000_i350)
+		igb_clear_vfta_i350(hw);
+	else
+		igb_clear_vfta(hw);
+
+	/* Setup the receive address */
+	igb_init_rx_addrs(hw, rar_count);
+
+	/* Zero out the Multicast HASH table */
+	hw_dbg("Zeroing the MTA\n");
+	for (i = 0; i < mac->mta_reg_count; i++)
+		array_wr32(E1000_MTA, i, 0);
+
+	/* Zero out the Unicast HASH table */
+	hw_dbg("Zeroing the UTA\n");
+	for (i = 0; i < mac->uta_reg_count; i++)
+		array_wr32(E1000_UTA, i, 0);
+
+	/* Setup link and flow control */
+	ret_val = igb_setup_link(hw);
+
+	/*
+	 * Clear all of the statistics registers (clear on read).  It is
+	 * important that we do this after we have tried to establish link
+	 * because the symbol error count will increment wildly if there
+	 * is no link.
+	 */
+	igb_clear_hw_cntrs_82575(hw);
+
+	return ret_val;
+}
+
+/**
+ *  igb_setup_copper_link_82575 - Configure copper link settings
+ *  @hw: pointer to the HW structure
+ *
+ *  Configures the link for auto-neg or forced speed and duplex.  Then we check
+ *  for link, once link is established calls to configure collision distance
+ *  and flow control are called.
+ **/
+static s32 igb_setup_copper_link_82575(struct e1000_hw *hw)
+{
+	u32 ctrl;
+	s32  ret_val;
+
+	ctrl = rd32(E1000_CTRL);
+	ctrl |= E1000_CTRL_SLU;
+	ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+	wr32(E1000_CTRL, ctrl);
+
+	ret_val = igb_setup_serdes_link_82575(hw);
+	if (ret_val)
+		goto out;
+
+	if (igb_sgmii_active_82575(hw) && !hw->phy.reset_disable) {
+		/* allow time for SFP cage time to power up phy */
+		msleep(300);
+
+		ret_val = hw->phy.ops.reset(hw);
+		if (ret_val) {
+			hw_dbg("Error resetting the PHY.\n");
+			goto out;
+		}
+	}
+	switch (hw->phy.type) {
+	case e1000_phy_m88:
+		if (hw->phy.id == I347AT4_E_PHY_ID ||
+		    hw->phy.id == M88E1112_E_PHY_ID)
+			ret_val = igb_copper_link_setup_m88_gen2(hw);
+		else
+			ret_val = igb_copper_link_setup_m88(hw);
+		break;
+	case e1000_phy_igp_3:
+		ret_val = igb_copper_link_setup_igp(hw);
+		break;
+	case e1000_phy_82580:
+		ret_val = igb_copper_link_setup_82580(hw);
+		break;
+	default:
+		ret_val = -E1000_ERR_PHY;
+		break;
+	}
+
+	if (ret_val)
+		goto out;
+
+	ret_val = igb_setup_copper_link(hw);
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_setup_serdes_link_82575 - Setup link for serdes
+ *  @hw: pointer to the HW structure
+ *
+ *  Configure the physical coding sub-layer (PCS) link.  The PCS link is
+ *  used on copper connections where the serialized gigabit media independent
+ *  interface (sgmii), or serdes fiber is being used.  Configures the link
+ *  for auto-negotiation or forces speed/duplex.
+ **/
+static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw)
+{
+	u32 ctrl_ext, ctrl_reg, reg;
+	bool pcs_autoneg;
+	s32 ret_val = E1000_SUCCESS;
+	u16 data;
+
+	if ((hw->phy.media_type != e1000_media_type_internal_serdes) &&
+	    !igb_sgmii_active_82575(hw))
+		return ret_val;
+
+
+	/*
+	 * On the 82575, SerDes loopback mode persists until it is
+	 * explicitly turned off or a power cycle is performed.  A read to
+	 * the register does not indicate its status.  Therefore, we ensure
+	 * loopback mode is disabled during initialization.
+	 */
+	wr32(E1000_SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK);
+
+	/* power on the sfp cage if present */
+	ctrl_ext = rd32(E1000_CTRL_EXT);
+	ctrl_ext &= ~E1000_CTRL_EXT_SDP3_DATA;
+	wr32(E1000_CTRL_EXT, ctrl_ext);
+
+	ctrl_reg = rd32(E1000_CTRL);
+	ctrl_reg |= E1000_CTRL_SLU;
+
+	if (hw->mac.type == e1000_82575 || hw->mac.type == e1000_82576) {
+		/* set both sw defined pins */
+		ctrl_reg |= E1000_CTRL_SWDPIN0 | E1000_CTRL_SWDPIN1;
+
+		/* Set switch control to serdes energy detect */
+		reg = rd32(E1000_CONNSW);
+		reg |= E1000_CONNSW_ENRGSRC;
+		wr32(E1000_CONNSW, reg);
+	}
+
+	reg = rd32(E1000_PCS_LCTL);
+
+	/* default pcs_autoneg to the same setting as mac autoneg */
+	pcs_autoneg = hw->mac.autoneg;
+
+	switch (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK) {
+	case E1000_CTRL_EXT_LINK_MODE_SGMII:
+		/* sgmii mode lets the phy handle forcing speed/duplex */
+		pcs_autoneg = true;
+		/* autoneg time out should be disabled for SGMII mode */
+		reg &= ~(E1000_PCS_LCTL_AN_TIMEOUT);
+		break;
+	case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX:
+		/* disable PCS autoneg and support parallel detect only */
+		pcs_autoneg = false;
+	default:
+		if (hw->mac.type == e1000_82575 ||
+		    hw->mac.type == e1000_82576) {
+			ret_val = hw->nvm.ops.read(hw, NVM_COMPAT, 1, &data);
+			if (ret_val) {
+				printk(KERN_DEBUG "NVM Read Error\n\n");
+				return ret_val;
+			}
+
+			if (data & E1000_EEPROM_PCS_AUTONEG_DISABLE_BIT)
+				pcs_autoneg = false;
+		}
+
+		/*
+		 * non-SGMII modes only supports a speed of 1000/Full for the
+		 * link so it is best to just force the MAC and let the pcs
+		 * link either autoneg or be forced to 1000/Full
+		 */
+		ctrl_reg |= E1000_CTRL_SPD_1000 | E1000_CTRL_FRCSPD |
+		            E1000_CTRL_FD | E1000_CTRL_FRCDPX;
+
+		/* set speed of 1000/Full if speed/duplex is forced */
+		reg |= E1000_PCS_LCTL_FSV_1000 | E1000_PCS_LCTL_FDV_FULL;
+		break;
+	}
+
+	wr32(E1000_CTRL, ctrl_reg);
+
+	/*
+	 * New SerDes mode allows for forcing speed or autonegotiating speed
+	 * at 1gb. Autoneg should be default set by most drivers. This is the
+	 * mode that will be compatible with older link partners and switches.
+	 * However, both are supported by the hardware and some drivers/tools.
+	 */
+	reg &= ~(E1000_PCS_LCTL_AN_ENABLE | E1000_PCS_LCTL_FLV_LINK_UP |
+		E1000_PCS_LCTL_FSD | E1000_PCS_LCTL_FORCE_LINK);
+
+	/*
+	 * We force flow control to prevent the CTRL register values from being
+	 * overwritten by the autonegotiated flow control values
+	 */
+	reg |= E1000_PCS_LCTL_FORCE_FCTRL;
+
+	if (pcs_autoneg) {
+		/* Set PCS register for autoneg */
+		reg |= E1000_PCS_LCTL_AN_ENABLE | /* Enable Autoneg */
+		       E1000_PCS_LCTL_AN_RESTART; /* Restart autoneg */
+		hw_dbg("Configuring Autoneg:PCS_LCTL=0x%08X\n", reg);
+	} else {
+		/* Set PCS register for forced link */
+		reg |= E1000_PCS_LCTL_FSD;        /* Force Speed */
+
+		hw_dbg("Configuring Forced Link:PCS_LCTL=0x%08X\n", reg);
+	}
+
+	wr32(E1000_PCS_LCTL, reg);
+
+	if (!igb_sgmii_active_82575(hw))
+		igb_force_mac_fc(hw);
+
+	return ret_val;
+}
+
+/**
+ *  igb_sgmii_active_82575 - Return sgmii state
+ *  @hw: pointer to the HW structure
+ *
+ *  82575 silicon has a serialized gigabit media independent interface (sgmii)
+ *  which can be enabled for use in the embedded applications.  Simply
+ *  return the current state of the sgmii interface.
+ **/
+static bool igb_sgmii_active_82575(struct e1000_hw *hw)
+{
+	struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575;
+	return dev_spec->sgmii_active;
+}
+
+/**
+ *  igb_reset_init_script_82575 - Inits HW defaults after reset
+ *  @hw: pointer to the HW structure
+ *
+ *  Inits recommended HW defaults after a reset when there is no EEPROM
+ *  detected. This is only for the 82575.
+ **/
+static s32 igb_reset_init_script_82575(struct e1000_hw *hw)
+{
+	if (hw->mac.type == e1000_82575) {
+		hw_dbg("Running reset init script for 82575\n");
+		/* SerDes configuration via SERDESCTRL */
+		igb_write_8bit_ctrl_reg(hw, E1000_SCTL, 0x00, 0x0C);
+		igb_write_8bit_ctrl_reg(hw, E1000_SCTL, 0x01, 0x78);
+		igb_write_8bit_ctrl_reg(hw, E1000_SCTL, 0x1B, 0x23);
+		igb_write_8bit_ctrl_reg(hw, E1000_SCTL, 0x23, 0x15);
+
+		/* CCM configuration via CCMCTL register */
+		igb_write_8bit_ctrl_reg(hw, E1000_CCMCTL, 0x14, 0x00);
+		igb_write_8bit_ctrl_reg(hw, E1000_CCMCTL, 0x10, 0x00);
+
+		/* PCIe lanes configuration */
+		igb_write_8bit_ctrl_reg(hw, E1000_GIOCTL, 0x00, 0xEC);
+		igb_write_8bit_ctrl_reg(hw, E1000_GIOCTL, 0x61, 0xDF);
+		igb_write_8bit_ctrl_reg(hw, E1000_GIOCTL, 0x34, 0x05);
+		igb_write_8bit_ctrl_reg(hw, E1000_GIOCTL, 0x2F, 0x81);
+
+		/* PCIe PLL Configuration */
+		igb_write_8bit_ctrl_reg(hw, E1000_SCCTL, 0x02, 0x47);
+		igb_write_8bit_ctrl_reg(hw, E1000_SCCTL, 0x14, 0x00);
+		igb_write_8bit_ctrl_reg(hw, E1000_SCCTL, 0x10, 0x00);
+	}
+
+	return 0;
+}
+
+/**
+ *  igb_read_mac_addr_82575 - Read device MAC address
+ *  @hw: pointer to the HW structure
+ **/
+static s32 igb_read_mac_addr_82575(struct e1000_hw *hw)
+{
+	s32 ret_val = 0;
+
+	/*
+	 * If there's an alternate MAC address place it in RAR0
+	 * so that it will override the Si installed default perm
+	 * address.
+	 */
+	ret_val = igb_check_alt_mac_addr(hw);
+	if (ret_val)
+		goto out;
+
+	ret_val = igb_read_mac_addr(hw);
+
+out:
+	return ret_val;
+}
+
+/**
+ * igb_power_down_phy_copper_82575 - Remove link during PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, or wake on lan is not enabled, remove the link.
+ **/
+void igb_power_down_phy_copper_82575(struct e1000_hw *hw)
+{
+	/* If the management interface is not enabled, then power down */
+	if (!(igb_enable_mng_pass_thru(hw) || igb_check_reset_block(hw)))
+		igb_power_down_phy_copper(hw);
+}
+
+/**
+ *  igb_clear_hw_cntrs_82575 - Clear device specific hardware counters
+ *  @hw: pointer to the HW structure
+ *
+ *  Clears the hardware counters by reading the counter registers.
+ **/
+static void igb_clear_hw_cntrs_82575(struct e1000_hw *hw)
+{
+	igb_clear_hw_cntrs_base(hw);
+
+	rd32(E1000_PRC64);
+	rd32(E1000_PRC127);
+	rd32(E1000_PRC255);
+	rd32(E1000_PRC511);
+	rd32(E1000_PRC1023);
+	rd32(E1000_PRC1522);
+	rd32(E1000_PTC64);
+	rd32(E1000_PTC127);
+	rd32(E1000_PTC255);
+	rd32(E1000_PTC511);
+	rd32(E1000_PTC1023);
+	rd32(E1000_PTC1522);
+
+	rd32(E1000_ALGNERRC);
+	rd32(E1000_RXERRC);
+	rd32(E1000_TNCRS);
+	rd32(E1000_CEXTERR);
+	rd32(E1000_TSCTC);
+	rd32(E1000_TSCTFC);
+
+	rd32(E1000_MGTPRC);
+	rd32(E1000_MGTPDC);
+	rd32(E1000_MGTPTC);
+
+	rd32(E1000_IAC);
+	rd32(E1000_ICRXOC);
+
+	rd32(E1000_ICRXPTC);
+	rd32(E1000_ICRXATC);
+	rd32(E1000_ICTXPTC);
+	rd32(E1000_ICTXATC);
+	rd32(E1000_ICTXQEC);
+	rd32(E1000_ICTXQMTC);
+	rd32(E1000_ICRXDMTC);
+
+	rd32(E1000_CBTMPC);
+	rd32(E1000_HTDPMC);
+	rd32(E1000_CBRMPC);
+	rd32(E1000_RPTHC);
+	rd32(E1000_HGPTC);
+	rd32(E1000_HTCBDPC);
+	rd32(E1000_HGORCL);
+	rd32(E1000_HGORCH);
+	rd32(E1000_HGOTCL);
+	rd32(E1000_HGOTCH);
+	rd32(E1000_LENERRS);
+
+	/* This register should not be read in copper configurations */
+	if (hw->phy.media_type == e1000_media_type_internal_serdes ||
+	    igb_sgmii_active_82575(hw))
+		rd32(E1000_SCVPC);
+}
+
+/**
+ *  igb_rx_fifo_flush_82575 - Clean rx fifo after RX enable
+ *  @hw: pointer to the HW structure
+ *
+ *  After rx enable if managability is enabled then there is likely some
+ *  bad data at the start of the fifo and possibly in the DMA fifo.  This
+ *  function clears the fifos and flushes any packets that came in as rx was
+ *  being enabled.
+ **/
+void igb_rx_fifo_flush_82575(struct e1000_hw *hw)
+{
+	u32 rctl, rlpml, rxdctl[4], rfctl, temp_rctl, rx_enabled;
+	int i, ms_wait;
+
+	if (hw->mac.type != e1000_82575 ||
+	    !(rd32(E1000_MANC) & E1000_MANC_RCV_TCO_EN))
+		return;
+
+	/* Disable all RX queues */
+	for (i = 0; i < 4; i++) {
+		rxdctl[i] = rd32(E1000_RXDCTL(i));
+		wr32(E1000_RXDCTL(i),
+		     rxdctl[i] & ~E1000_RXDCTL_QUEUE_ENABLE);
+	}
+	/* Poll all queues to verify they have shut down */
+	for (ms_wait = 0; ms_wait < 10; ms_wait++) {
+		msleep(1);
+		rx_enabled = 0;
+		for (i = 0; i < 4; i++)
+			rx_enabled |= rd32(E1000_RXDCTL(i));
+		if (!(rx_enabled & E1000_RXDCTL_QUEUE_ENABLE))
+			break;
+	}
+
+	if (ms_wait == 10)
+		hw_dbg("Queue disable timed out after 10ms\n");
+
+	/* Clear RLPML, RCTL.SBP, RFCTL.LEF, and set RCTL.LPE so that all
+	 * incoming packets are rejected.  Set enable and wait 2ms so that
+	 * any packet that was coming in as RCTL.EN was set is flushed
+	 */
+	rfctl = rd32(E1000_RFCTL);
+	wr32(E1000_RFCTL, rfctl & ~E1000_RFCTL_LEF);
+
+	rlpml = rd32(E1000_RLPML);
+	wr32(E1000_RLPML, 0);
+
+	rctl = rd32(E1000_RCTL);
+	temp_rctl = rctl & ~(E1000_RCTL_EN | E1000_RCTL_SBP);
+	temp_rctl |= E1000_RCTL_LPE;
+
+	wr32(E1000_RCTL, temp_rctl);
+	wr32(E1000_RCTL, temp_rctl | E1000_RCTL_EN);
+	wrfl();
+	msleep(2);
+
+	/* Enable RX queues that were previously enabled and restore our
+	 * previous state
+	 */
+	for (i = 0; i < 4; i++)
+		wr32(E1000_RXDCTL(i), rxdctl[i]);
+	wr32(E1000_RCTL, rctl);
+	wrfl();
+
+	wr32(E1000_RLPML, rlpml);
+	wr32(E1000_RFCTL, rfctl);
+
+	/* Flush receive errors generated by workaround */
+	rd32(E1000_ROC);
+	rd32(E1000_RNBC);
+	rd32(E1000_MPC);
+}
+
+/**
+ *  igb_set_pcie_completion_timeout - set pci-e completion timeout
+ *  @hw: pointer to the HW structure
+ *
+ *  The defaults for 82575 and 82576 should be in the range of 50us to 50ms,
+ *  however the hardware default for these parts is 500us to 1ms which is less
+ *  than the 10ms recommended by the pci-e spec.  To address this we need to
+ *  increase the value to either 10ms to 200ms for capability version 1 config,
+ *  or 16ms to 55ms for version 2.
+ **/
+static s32 igb_set_pcie_completion_timeout(struct e1000_hw *hw)
+{
+	u32 gcr = rd32(E1000_GCR);
+	s32 ret_val = 0;
+	u16 pcie_devctl2;
+
+	/* only take action if timeout value is defaulted to 0 */
+	if (gcr & E1000_GCR_CMPL_TMOUT_MASK)
+		goto out;
+
+	/*
+	 * if capababilities version is type 1 we can write the
+	 * timeout of 10ms to 200ms through the GCR register
+	 */
+	if (!(gcr & E1000_GCR_CAP_VER2)) {
+		gcr |= E1000_GCR_CMPL_TMOUT_10ms;
+		goto out;
+	}
+
+	/*
+	 * for version 2 capabilities we need to write the config space
+	 * directly in order to set the completion timeout value for
+	 * 16ms to 55ms
+	 */
+	ret_val = igb_read_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2,
+	                                &pcie_devctl2);
+	if (ret_val)
+		goto out;
+
+	pcie_devctl2 |= PCIE_DEVICE_CONTROL2_16ms;
+
+	ret_val = igb_write_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2,
+	                                 &pcie_devctl2);
+out:
+	/* disable completion timeout resend */
+	gcr &= ~E1000_GCR_CMPL_TMOUT_RESEND;
+
+	wr32(E1000_GCR, gcr);
+	return ret_val;
+}
+
+/**
+ *  igb_vmdq_set_anti_spoofing_pf - enable or disable anti-spoofing
+ *  @hw: pointer to the hardware struct
+ *  @enable: state to enter, either enabled or disabled
+ *  @pf: Physical Function pool - do not set anti-spoofing for the PF
+ *
+ *  enables/disables L2 switch anti-spoofing functionality.
+ **/
+void igb_vmdq_set_anti_spoofing_pf(struct e1000_hw *hw, bool enable, int pf)
+{
+	u32 dtxswc;
+
+	switch (hw->mac.type) {
+	case e1000_82576:
+	case e1000_i350:
+		dtxswc = rd32(E1000_DTXSWC);
+		if (enable) {
+			dtxswc |= (E1000_DTXSWC_MAC_SPOOF_MASK |
+				   E1000_DTXSWC_VLAN_SPOOF_MASK);
+			/* The PF can spoof - it has to in order to
+			 * support emulation mode NICs */
+			dtxswc ^= (1 << pf | 1 << (pf + MAX_NUM_VFS));
+		} else {
+			dtxswc &= ~(E1000_DTXSWC_MAC_SPOOF_MASK |
+				    E1000_DTXSWC_VLAN_SPOOF_MASK);
+		}
+		wr32(E1000_DTXSWC, dtxswc);
+		break;
+	default:
+		break;
+	}
+}
+
+/**
+ *  igb_vmdq_set_loopback_pf - enable or disable vmdq loopback
+ *  @hw: pointer to the hardware struct
+ *  @enable: state to enter, either enabled or disabled
+ *
+ *  enables/disables L2 switch loopback functionality.
+ **/
+void igb_vmdq_set_loopback_pf(struct e1000_hw *hw, bool enable)
+{
+	u32 dtxswc;
+
+	switch (hw->mac.type) {
+	case e1000_82576:
+		dtxswc = rd32(E1000_DTXSWC);
+		if (enable)
+			dtxswc |= E1000_DTXSWC_VMDQ_LOOPBACK_EN;
+		else
+			dtxswc &= ~E1000_DTXSWC_VMDQ_LOOPBACK_EN;
+		wr32(E1000_DTXSWC, dtxswc);
+		break;
+	case e1000_i350:
+		dtxswc = rd32(E1000_TXSWC);
+		if (enable)
+			dtxswc |= E1000_DTXSWC_VMDQ_LOOPBACK_EN;
+		else
+			dtxswc &= ~E1000_DTXSWC_VMDQ_LOOPBACK_EN;
+		wr32(E1000_TXSWC, dtxswc);
+		break;
+	default:
+		/* Currently no other hardware supports loopback */
+		break;
+	}
+
+
+}
+
+/**
+ *  igb_vmdq_set_replication_pf - enable or disable vmdq replication
+ *  @hw: pointer to the hardware struct
+ *  @enable: state to enter, either enabled or disabled
+ *
+ *  enables/disables replication of packets across multiple pools.
+ **/
+void igb_vmdq_set_replication_pf(struct e1000_hw *hw, bool enable)
+{
+	u32 vt_ctl = rd32(E1000_VT_CTL);
+
+	if (enable)
+		vt_ctl |= E1000_VT_CTL_VM_REPL_EN;
+	else
+		vt_ctl &= ~E1000_VT_CTL_VM_REPL_EN;
+
+	wr32(E1000_VT_CTL, vt_ctl);
+}
+
+/**
+ *  igb_read_phy_reg_82580 - Read 82580 MDI control register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Reads the MDI control register in the PHY at offset and stores the
+ *  information read to data.
+ **/
+static s32 igb_read_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+	s32 ret_val;
+
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		goto out;
+
+	ret_val = igb_read_phy_reg_mdic(hw, offset, data);
+
+	hw->phy.ops.release(hw);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_write_phy_reg_82580 - Write 82580 MDI control register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write to register at offset
+ *
+ *  Writes data to MDI control register in the PHY at offset.
+ **/
+static s32 igb_write_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 data)
+{
+	s32 ret_val;
+
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		goto out;
+
+	ret_val = igb_write_phy_reg_mdic(hw, offset, data);
+
+	hw->phy.ops.release(hw);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_reset_mdicnfg_82580 - Reset MDICNFG destination and com_mdio bits
+ *  @hw: pointer to the HW structure
+ *
+ *  This resets the the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
+ *  the values found in the EEPROM.  This addresses an issue in which these
+ *  bits are not restored from EEPROM after reset.
+ **/
+static s32 igb_reset_mdicnfg_82580(struct e1000_hw *hw)
+{
+	s32 ret_val = 0;
+	u32 mdicnfg;
+	u16 nvm_data = 0;
+
+	if (hw->mac.type != e1000_82580)
+		goto out;
+	if (!igb_sgmii_active_82575(hw))
+		goto out;
+
+	ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A +
+				   NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1,
+				   &nvm_data);
+	if (ret_val) {
+		hw_dbg("NVM Read Error\n");
+		goto out;
+	}
+
+	mdicnfg = rd32(E1000_MDICNFG);
+	if (nvm_data & NVM_WORD24_EXT_MDIO)
+		mdicnfg |= E1000_MDICNFG_EXT_MDIO;
+	if (nvm_data & NVM_WORD24_COM_MDIO)
+		mdicnfg |= E1000_MDICNFG_COM_MDIO;
+	wr32(E1000_MDICNFG, mdicnfg);
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_reset_hw_82580 - Reset hardware
+ *  @hw: pointer to the HW structure
+ *
+ *  This resets function or entire device (all ports, etc.)
+ *  to a known state.
+ **/
+static s32 igb_reset_hw_82580(struct e1000_hw *hw)
+{
+	s32 ret_val = 0;
+	/* BH SW mailbox bit in SW_FW_SYNC */
+	u16 swmbsw_mask = E1000_SW_SYNCH_MB;
+	u32 ctrl, icr;
+	bool global_device_reset = hw->dev_spec._82575.global_device_reset;
+
+
+	hw->dev_spec._82575.global_device_reset = false;
+
+	/* Get current control state. */
+	ctrl = rd32(E1000_CTRL);
+
+	/*
+	 * Prevent the PCI-E bus from sticking if there is no TLP connection
+	 * on the last TLP read/write transaction when MAC is reset.
+	 */
+	ret_val = igb_disable_pcie_master(hw);
+	if (ret_val)
+		hw_dbg("PCI-E Master disable polling has failed.\n");
+
+	hw_dbg("Masking off all interrupts\n");
+	wr32(E1000_IMC, 0xffffffff);
+	wr32(E1000_RCTL, 0);
+	wr32(E1000_TCTL, E1000_TCTL_PSP);
+	wrfl();
+
+	msleep(10);
+
+	/* Determine whether or not a global dev reset is requested */
+	if (global_device_reset &&
+		igb_acquire_swfw_sync_82575(hw, swmbsw_mask))
+			global_device_reset = false;
+
+	if (global_device_reset &&
+		!(rd32(E1000_STATUS) & E1000_STAT_DEV_RST_SET))
+		ctrl |= E1000_CTRL_DEV_RST;
+	else
+		ctrl |= E1000_CTRL_RST;
+
+	wr32(E1000_CTRL, ctrl);
+	wrfl();
+
+	/* Add delay to insure DEV_RST has time to complete */
+	if (global_device_reset)
+		msleep(5);
+
+	ret_val = igb_get_auto_rd_done(hw);
+	if (ret_val) {
+		/*
+		 * When auto config read does not complete, do not
+		 * return with an error. This can happen in situations
+		 * where there is no eeprom and prevents getting link.
+		 */
+		hw_dbg("Auto Read Done did not complete\n");
+	}
+
+	/* If EEPROM is not present, run manual init scripts */
+	if ((rd32(E1000_EECD) & E1000_EECD_PRES) == 0)
+		igb_reset_init_script_82575(hw);
+
+	/* clear global device reset status bit */
+	wr32(E1000_STATUS, E1000_STAT_DEV_RST_SET);
+
+	/* Clear any pending interrupt events. */
+	wr32(E1000_IMC, 0xffffffff);
+	icr = rd32(E1000_ICR);
+
+	ret_val = igb_reset_mdicnfg_82580(hw);
+	if (ret_val)
+		hw_dbg("Could not reset MDICNFG based on EEPROM\n");
+
+	/* Install any alternate MAC address into RAR0 */
+	ret_val = igb_check_alt_mac_addr(hw);
+
+	/* Release semaphore */
+	if (global_device_reset)
+		igb_release_swfw_sync_82575(hw, swmbsw_mask);
+
+	return ret_val;
+}
+
+/**
+ *  igb_rxpbs_adjust_82580 - adjust RXPBS value to reflect actual RX PBA size
+ *  @data: data received by reading RXPBS register
+ *
+ *  The 82580 uses a table based approach for packet buffer allocation sizes.
+ *  This function converts the retrieved value into the correct table value
+ *     0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7
+ *  0x0 36  72 144   1   2   4   8  16
+ *  0x8 35  70 140 rsv rsv rsv rsv rsv
+ */
+u16 igb_rxpbs_adjust_82580(u32 data)
+{
+	u16 ret_val = 0;
+
+	if (data < E1000_82580_RXPBS_TABLE_SIZE)
+		ret_val = e1000_82580_rxpbs_table[data];
+
+	return ret_val;
+}
+
+/**
+ *  igb_validate_nvm_checksum_with_offset - Validate EEPROM
+ *  checksum
+ *  @hw: pointer to the HW structure
+ *  @offset: offset in words of the checksum protected region
+ *
+ *  Calculates the EEPROM checksum by reading/adding each word of the EEPROM
+ *  and then verifies that the sum of the EEPROM is equal to 0xBABA.
+ **/
+static s32 igb_validate_nvm_checksum_with_offset(struct e1000_hw *hw,
+						 u16 offset)
+{
+	s32 ret_val = 0;
+	u16 checksum = 0;
+	u16 i, nvm_data;
+
+	for (i = offset; i < ((NVM_CHECKSUM_REG + offset) + 1); i++) {
+		ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
+		if (ret_val) {
+			hw_dbg("NVM Read Error\n");
+			goto out;
+		}
+		checksum += nvm_data;
+	}
+
+	if (checksum != (u16) NVM_SUM) {
+		hw_dbg("NVM Checksum Invalid\n");
+		ret_val = -E1000_ERR_NVM;
+		goto out;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_update_nvm_checksum_with_offset - Update EEPROM
+ *  checksum
+ *  @hw: pointer to the HW structure
+ *  @offset: offset in words of the checksum protected region
+ *
+ *  Updates the EEPROM checksum by reading/adding each word of the EEPROM
+ *  up to the checksum.  Then calculates the EEPROM checksum and writes the
+ *  value to the EEPROM.
+ **/
+static s32 igb_update_nvm_checksum_with_offset(struct e1000_hw *hw, u16 offset)
+{
+	s32 ret_val;
+	u16 checksum = 0;
+	u16 i, nvm_data;
+
+	for (i = offset; i < (NVM_CHECKSUM_REG + offset); i++) {
+		ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
+		if (ret_val) {
+			hw_dbg("NVM Read Error while updating checksum.\n");
+			goto out;
+		}
+		checksum += nvm_data;
+	}
+	checksum = (u16) NVM_SUM - checksum;
+	ret_val = hw->nvm.ops.write(hw, (NVM_CHECKSUM_REG + offset), 1,
+				&checksum);
+	if (ret_val)
+		hw_dbg("NVM Write Error while updating checksum.\n");
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_validate_nvm_checksum_82580 - Validate EEPROM checksum
+ *  @hw: pointer to the HW structure
+ *
+ *  Calculates the EEPROM section checksum by reading/adding each word of
+ *  the EEPROM and then verifies that the sum of the EEPROM is
+ *  equal to 0xBABA.
+ **/
+static s32 igb_validate_nvm_checksum_82580(struct e1000_hw *hw)
+{
+	s32 ret_val = 0;
+	u16 eeprom_regions_count = 1;
+	u16 j, nvm_data;
+	u16 nvm_offset;
+
+	ret_val = hw->nvm.ops.read(hw, NVM_COMPATIBILITY_REG_3, 1, &nvm_data);
+	if (ret_val) {
+		hw_dbg("NVM Read Error\n");
+		goto out;
+	}
+
+	if (nvm_data & NVM_COMPATIBILITY_BIT_MASK) {
+		/* if checksums compatibility bit is set validate checksums
+		 * for all 4 ports. */
+		eeprom_regions_count = 4;
+	}
+
+	for (j = 0; j < eeprom_regions_count; j++) {
+		nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j);
+		ret_val = igb_validate_nvm_checksum_with_offset(hw,
+								nvm_offset);
+		if (ret_val != 0)
+			goto out;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_update_nvm_checksum_82580 - Update EEPROM checksum
+ *  @hw: pointer to the HW structure
+ *
+ *  Updates the EEPROM section checksums for all 4 ports by reading/adding
+ *  each word of the EEPROM up to the checksum.  Then calculates the EEPROM
+ *  checksum and writes the value to the EEPROM.
+ **/
+static s32 igb_update_nvm_checksum_82580(struct e1000_hw *hw)
+{
+	s32 ret_val;
+	u16 j, nvm_data;
+	u16 nvm_offset;
+
+	ret_val = hw->nvm.ops.read(hw, NVM_COMPATIBILITY_REG_3, 1, &nvm_data);
+	if (ret_val) {
+		hw_dbg("NVM Read Error while updating checksum"
+			" compatibility bit.\n");
+		goto out;
+	}
+
+	if ((nvm_data & NVM_COMPATIBILITY_BIT_MASK) == 0) {
+		/* set compatibility bit to validate checksums appropriately */
+		nvm_data = nvm_data | NVM_COMPATIBILITY_BIT_MASK;
+		ret_val = hw->nvm.ops.write(hw, NVM_COMPATIBILITY_REG_3, 1,
+					&nvm_data);
+		if (ret_val) {
+			hw_dbg("NVM Write Error while updating checksum"
+				" compatibility bit.\n");
+			goto out;
+		}
+	}
+
+	for (j = 0; j < 4; j++) {
+		nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j);
+		ret_val = igb_update_nvm_checksum_with_offset(hw, nvm_offset);
+		if (ret_val)
+			goto out;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_validate_nvm_checksum_i350 - Validate EEPROM checksum
+ *  @hw: pointer to the HW structure
+ *
+ *  Calculates the EEPROM section checksum by reading/adding each word of
+ *  the EEPROM and then verifies that the sum of the EEPROM is
+ *  equal to 0xBABA.
+ **/
+static s32 igb_validate_nvm_checksum_i350(struct e1000_hw *hw)
+{
+	s32 ret_val = 0;
+	u16 j;
+	u16 nvm_offset;
+
+	for (j = 0; j < 4; j++) {
+		nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j);
+		ret_val = igb_validate_nvm_checksum_with_offset(hw,
+								nvm_offset);
+		if (ret_val != 0)
+			goto out;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_update_nvm_checksum_i350 - Update EEPROM checksum
+ *  @hw: pointer to the HW structure
+ *
+ *  Updates the EEPROM section checksums for all 4 ports by reading/adding
+ *  each word of the EEPROM up to the checksum.  Then calculates the EEPROM
+ *  checksum and writes the value to the EEPROM.
+ **/
+static s32 igb_update_nvm_checksum_i350(struct e1000_hw *hw)
+{
+	s32 ret_val = 0;
+	u16 j;
+	u16 nvm_offset;
+
+	for (j = 0; j < 4; j++) {
+		nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j);
+		ret_val = igb_update_nvm_checksum_with_offset(hw, nvm_offset);
+		if (ret_val != 0)
+			goto out;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_set_eee_i350 - Enable/disable EEE support
+ *  @hw: pointer to the HW structure
+ *
+ *  Enable/disable EEE based on setting in dev_spec structure.
+ *
+ **/
+s32 igb_set_eee_i350(struct e1000_hw *hw)
+{
+	s32 ret_val = 0;
+	u32 ipcnfg, eeer, ctrl_ext;
+
+	ctrl_ext = rd32(E1000_CTRL_EXT);
+	if ((hw->mac.type != e1000_i350) ||
+	    (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK))
+		goto out;
+	ipcnfg = rd32(E1000_IPCNFG);
+	eeer = rd32(E1000_EEER);
+
+	/* enable or disable per user setting */
+	if (!(hw->dev_spec._82575.eee_disable)) {
+		ipcnfg |= (E1000_IPCNFG_EEE_1G_AN |
+			E1000_IPCNFG_EEE_100M_AN);
+		eeer |= (E1000_EEER_TX_LPI_EN |
+			E1000_EEER_RX_LPI_EN |
+			E1000_EEER_LPI_FC);
+
+	} else {
+		ipcnfg &= ~(E1000_IPCNFG_EEE_1G_AN |
+			E1000_IPCNFG_EEE_100M_AN);
+		eeer &= ~(E1000_EEER_TX_LPI_EN |
+			E1000_EEER_RX_LPI_EN |
+			E1000_EEER_LPI_FC);
+	}
+	wr32(E1000_IPCNFG, ipcnfg);
+	wr32(E1000_EEER, eeer);
+out:
+
+	return ret_val;
+}
+
+static struct e1000_mac_operations e1000_mac_ops_82575 = {
+	.init_hw              = igb_init_hw_82575,
+	.check_for_link       = igb_check_for_link_82575,
+	.rar_set              = igb_rar_set,
+	.read_mac_addr        = igb_read_mac_addr_82575,
+	.get_speed_and_duplex = igb_get_speed_and_duplex_copper,
+};
+
+static struct e1000_phy_operations e1000_phy_ops_82575 = {
+	.acquire              = igb_acquire_phy_82575,
+	.get_cfg_done         = igb_get_cfg_done_82575,
+	.release              = igb_release_phy_82575,
+};
+
+static struct e1000_nvm_operations e1000_nvm_ops_82575 = {
+	.acquire              = igb_acquire_nvm_82575,
+	.read                 = igb_read_nvm_eerd,
+	.release              = igb_release_nvm_82575,
+	.write                = igb_write_nvm_spi,
+};
+
+const struct e1000_info e1000_82575_info = {
+	.get_invariants = igb_get_invariants_82575,
+	.mac_ops = &e1000_mac_ops_82575,
+	.phy_ops = &e1000_phy_ops_82575,
+	.nvm_ops = &e1000_nvm_ops_82575,
+};
+
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.h b/drivers/net/ethernet/intel/igb/e1000_82575.h
new file mode 100644
index 00000000000..08a757eb660
--- /dev/null
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.h
@@ -0,0 +1,260 @@
+/*******************************************************************************
+
+  Intel(R) Gigabit Ethernet Linux driver
+  Copyright(c) 2007-2011 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_82575_H_
+#define _E1000_82575_H_
+
+extern void igb_shutdown_serdes_link_82575(struct e1000_hw *hw);
+extern void igb_power_up_serdes_link_82575(struct e1000_hw *hw);
+extern void igb_power_down_phy_copper_82575(struct e1000_hw *hw);
+extern void igb_rx_fifo_flush_82575(struct e1000_hw *hw);
+
+#define ID_LED_DEFAULT_82575_SERDES ((ID_LED_DEF1_DEF2 << 12) | \
+                                     (ID_LED_DEF1_DEF2 <<  8) | \
+                                     (ID_LED_DEF1_DEF2 <<  4) | \
+                                     (ID_LED_OFF1_ON2))
+
+#define E1000_RAR_ENTRIES_82575        16
+#define E1000_RAR_ENTRIES_82576        24
+#define E1000_RAR_ENTRIES_82580        24
+#define E1000_RAR_ENTRIES_I350         32
+
+#define E1000_SW_SYNCH_MB              0x00000100
+#define E1000_STAT_DEV_RST_SET         0x00100000
+#define E1000_CTRL_DEV_RST             0x20000000
+
+/* SRRCTL bit definitions */
+#define E1000_SRRCTL_BSIZEPKT_SHIFT                     10 /* Shift _right_ */
+#define E1000_SRRCTL_BSIZEHDRSIZE_SHIFT                 2  /* Shift _left_ */
+#define E1000_SRRCTL_DESCTYPE_ADV_ONEBUF                0x02000000
+#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS          0x0A000000
+#define E1000_SRRCTL_DROP_EN                            0x80000000
+#define E1000_SRRCTL_TIMESTAMP                          0x40000000
+
+#define E1000_MRQC_ENABLE_RSS_4Q            0x00000002
+#define E1000_MRQC_ENABLE_VMDQ              0x00000003
+#define E1000_MRQC_ENABLE_VMDQ_RSS_2Q       0x00000005
+#define E1000_MRQC_RSS_FIELD_IPV4_UDP       0x00400000
+#define E1000_MRQC_RSS_FIELD_IPV6_UDP       0x00800000
+#define E1000_MRQC_RSS_FIELD_IPV6_UDP_EX    0x01000000
+
+#define E1000_EICR_TX_QUEUE ( \
+    E1000_EICR_TX_QUEUE0 |    \
+    E1000_EICR_TX_QUEUE1 |    \
+    E1000_EICR_TX_QUEUE2 |    \
+    E1000_EICR_TX_QUEUE3)
+
+#define E1000_EICR_RX_QUEUE ( \
+    E1000_EICR_RX_QUEUE0 |    \
+    E1000_EICR_RX_QUEUE1 |    \
+    E1000_EICR_RX_QUEUE2 |    \
+    E1000_EICR_RX_QUEUE3)
+
+/* Immediate Interrupt Rx (A.K.A. Low Latency Interrupt) */
+#define E1000_IMIREXT_SIZE_BP     0x00001000  /* Packet size bypass */
+#define E1000_IMIREXT_CTRL_BP     0x00080000  /* Bypass check of ctrl bits */
+
+/* Receive Descriptor - Advanced */
+union e1000_adv_rx_desc {
+	struct {
+		__le64 pkt_addr;             /* Packet buffer address */
+		__le64 hdr_addr;             /* Header buffer address */
+	} read;
+	struct {
+		struct {
+			struct {
+				__le16 pkt_info;   /* RSS type, Packet type */
+				__le16 hdr_info;   /* Split Header,
+						    * header buffer length */
+			} lo_dword;
+			union {
+				__le32 rss;          /* RSS Hash */
+				struct {
+					__le16 ip_id;    /* IP id */
+					__le16 csum;     /* Packet Checksum */
+				} csum_ip;
+			} hi_dword;
+		} lower;
+		struct {
+			__le32 status_error;     /* ext status/error */
+			__le16 length;           /* Packet length */
+			__le16 vlan;             /* VLAN tag */
+		} upper;
+	} wb;  /* writeback */
+};
+
+#define E1000_RXDADV_HDRBUFLEN_MASK      0x7FE0
+#define E1000_RXDADV_HDRBUFLEN_SHIFT     5
+#define E1000_RXDADV_STAT_TS             0x10000 /* Pkt was time stamped */
+#define E1000_RXDADV_STAT_TSIP           0x08000 /* timestamp in packet */
+
+/* Transmit Descriptor - Advanced */
+union e1000_adv_tx_desc {
+	struct {
+		__le64 buffer_addr;    /* Address of descriptor's data buf */
+		__le32 cmd_type_len;
+		__le32 olinfo_status;
+	} read;
+	struct {
+		__le64 rsvd;       /* Reserved */
+		__le32 nxtseq_seed;
+		__le32 status;
+	} wb;
+};
+
+/* Adv Transmit Descriptor Config Masks */
+#define E1000_ADVTXD_MAC_TSTAMP   0x00080000 /* IEEE1588 Timestamp packet */
+#define E1000_ADVTXD_DTYP_CTXT    0x00200000 /* Advanced Context Descriptor */
+#define E1000_ADVTXD_DTYP_DATA    0x00300000 /* Advanced Data Descriptor */
+#define E1000_ADVTXD_DCMD_EOP     0x01000000 /* End of Packet */
+#define E1000_ADVTXD_DCMD_IFCS    0x02000000 /* Insert FCS (Ethernet CRC) */
+#define E1000_ADVTXD_DCMD_RS      0x08000000 /* Report Status */
+#define E1000_ADVTXD_DCMD_DEXT    0x20000000 /* Descriptor extension (1=Adv) */
+#define E1000_ADVTXD_DCMD_VLE     0x40000000 /* VLAN pkt enable */
+#define E1000_ADVTXD_DCMD_TSE     0x80000000 /* TCP Seg enable */
+#define E1000_ADVTXD_PAYLEN_SHIFT    14 /* Adv desc PAYLEN shift */
+
+/* Context descriptors */
+struct e1000_adv_tx_context_desc {
+	__le32 vlan_macip_lens;
+	__le32 seqnum_seed;
+	__le32 type_tucmd_mlhl;
+	__le32 mss_l4len_idx;
+};
+
+#define E1000_ADVTXD_MACLEN_SHIFT    9  /* Adv ctxt desc mac len shift */
+#define E1000_ADVTXD_TUCMD_IPV4    0x00000400  /* IP Packet Type: 1=IPv4 */
+#define E1000_ADVTXD_TUCMD_L4T_TCP 0x00000800  /* L4 Packet TYPE of TCP */
+#define E1000_ADVTXD_TUCMD_L4T_SCTP 0x00001000 /* L4 packet TYPE of SCTP */
+/* IPSec Encrypt Enable for ESP */
+#define E1000_ADVTXD_L4LEN_SHIFT     8  /* Adv ctxt L4LEN shift */
+#define E1000_ADVTXD_MSS_SHIFT      16  /* Adv ctxt MSS shift */
+/* Adv ctxt IPSec SA IDX mask */
+/* Adv ctxt IPSec ESP len mask */
+
+/* Additional Transmit Descriptor Control definitions */
+#define E1000_TXDCTL_QUEUE_ENABLE  0x02000000 /* Enable specific Tx Queue */
+/* Tx Queue Arbitration Priority 0=low, 1=high */
+
+/* Additional Receive Descriptor Control definitions */
+#define E1000_RXDCTL_QUEUE_ENABLE  0x02000000 /* Enable specific Rx Queue */
+
+/* Direct Cache Access (DCA) definitions */
+#define E1000_DCA_CTRL_DCA_MODE_DISABLE 0x01 /* DCA Disable */
+#define E1000_DCA_CTRL_DCA_MODE_CB2     0x02 /* DCA Mode CB2 */
+
+#define E1000_DCA_RXCTRL_CPUID_MASK 0x0000001F /* Rx CPUID Mask */
+#define E1000_DCA_RXCTRL_DESC_DCA_EN (1 << 5) /* DCA Rx Desc enable */
+#define E1000_DCA_RXCTRL_HEAD_DCA_EN (1 << 6) /* DCA Rx Desc header enable */
+#define E1000_DCA_RXCTRL_DATA_DCA_EN (1 << 7) /* DCA Rx Desc payload enable */
+
+#define E1000_DCA_TXCTRL_CPUID_MASK 0x0000001F /* Tx CPUID Mask */
+#define E1000_DCA_TXCTRL_DESC_DCA_EN (1 << 5) /* DCA Tx Desc enable */
+#define E1000_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* Tx Desc writeback RO bit */
+
+/* Additional DCA related definitions, note change in position of CPUID */
+#define E1000_DCA_TXCTRL_CPUID_MASK_82576 0xFF000000 /* Tx CPUID Mask */
+#define E1000_DCA_RXCTRL_CPUID_MASK_82576 0xFF000000 /* Rx CPUID Mask */
+#define E1000_DCA_TXCTRL_CPUID_SHIFT 24 /* Tx CPUID now in the last byte */
+#define E1000_DCA_RXCTRL_CPUID_SHIFT 24 /* Rx CPUID now in the last byte */
+
+/* ETQF register bit definitions */
+#define E1000_ETQF_FILTER_ENABLE   (1 << 26)
+#define E1000_ETQF_1588            (1 << 30)
+
+/* FTQF register bit definitions */
+#define E1000_FTQF_VF_BP               0x00008000
+#define E1000_FTQF_1588_TIME_STAMP     0x08000000
+#define E1000_FTQF_MASK                0xF0000000
+#define E1000_FTQF_MASK_PROTO_BP       0x10000000
+#define E1000_FTQF_MASK_SOURCE_PORT_BP 0x80000000
+
+#define E1000_NVM_APME_82575          0x0400
+#define MAX_NUM_VFS                   8
+
+#define E1000_DTXSWC_MAC_SPOOF_MASK   0x000000FF /* Per VF MAC spoof control */
+#define E1000_DTXSWC_VLAN_SPOOF_MASK  0x0000FF00 /* Per VF VLAN spoof control */
+#define E1000_DTXSWC_LLE_MASK         0x00FF0000 /* Per VF Local LB enables */
+#define E1000_DTXSWC_VLAN_SPOOF_SHIFT 8
+#define E1000_DTXSWC_VMDQ_LOOPBACK_EN (1 << 31)  /* global VF LB enable */
+
+/* Easy defines for setting default pool, would normally be left a zero */
+#define E1000_VT_CTL_DEFAULT_POOL_SHIFT 7
+#define E1000_VT_CTL_DEFAULT_POOL_MASK  (0x7 << E1000_VT_CTL_DEFAULT_POOL_SHIFT)
+
+/* Other useful VMD_CTL register defines */
+#define E1000_VT_CTL_IGNORE_MAC         (1 << 28)
+#define E1000_VT_CTL_DISABLE_DEF_POOL   (1 << 29)
+#define E1000_VT_CTL_VM_REPL_EN         (1 << 30)
+
+/* Per VM Offload register setup */
+#define E1000_VMOLR_RLPML_MASK 0x00003FFF /* Long Packet Maximum Length mask */
+#define E1000_VMOLR_LPE        0x00010000 /* Accept Long packet */
+#define E1000_VMOLR_RSSE       0x00020000 /* Enable RSS */
+#define E1000_VMOLR_AUPE       0x01000000 /* Accept untagged packets */
+#define E1000_VMOLR_ROMPE      0x02000000 /* Accept overflow multicast */
+#define E1000_VMOLR_ROPE       0x04000000 /* Accept overflow unicast */
+#define E1000_VMOLR_BAM        0x08000000 /* Accept Broadcast packets */
+#define E1000_VMOLR_MPME       0x10000000 /* Multicast promiscuous mode */
+#define E1000_VMOLR_STRVLAN    0x40000000 /* Vlan stripping enable */
+#define E1000_VMOLR_STRCRC     0x80000000 /* CRC stripping enable */
+
+#define E1000_VLVF_ARRAY_SIZE     32
+#define E1000_VLVF_VLANID_MASK    0x00000FFF
+#define E1000_VLVF_POOLSEL_SHIFT  12
+#define E1000_VLVF_POOLSEL_MASK   (0xFF << E1000_VLVF_POOLSEL_SHIFT)
+#define E1000_VLVF_LVLAN          0x00100000
+#define E1000_VLVF_VLANID_ENABLE  0x80000000
+
+#define E1000_VMVIR_VLANA_DEFAULT      0x40000000 /* Always use default VLAN */
+#define E1000_VMVIR_VLANA_NEVER        0x80000000 /* Never insert VLAN tag */
+
+#define E1000_IOVCTL 0x05BBC
+#define E1000_IOVCTL_REUSE_VFQ 0x00000001
+
+#define E1000_RPLOLR_STRVLAN   0x40000000
+#define E1000_RPLOLR_STRCRC    0x80000000
+
+#define E1000_DTXCTL_8023LL     0x0004
+#define E1000_DTXCTL_VLAN_ADDED 0x0008
+#define E1000_DTXCTL_OOS_ENABLE 0x0010
+#define E1000_DTXCTL_MDP_EN     0x0020
+#define E1000_DTXCTL_SPOOF_INT  0x0040
+
+#define E1000_EEPROM_PCS_AUTONEG_DISABLE_BIT	(1 << 14)
+
+#define ALL_QUEUES   0xFFFF
+
+/* RX packet buffer size defines */
+#define E1000_RXPBS_SIZE_MASK_82576  0x0000007F
+void igb_vmdq_set_anti_spoofing_pf(struct e1000_hw *, bool, int);
+void igb_vmdq_set_loopback_pf(struct e1000_hw *, bool);
+void igb_vmdq_set_replication_pf(struct e1000_hw *, bool);
+u16 igb_rxpbs_adjust_82580(u32 data);
+s32 igb_set_eee_i350(struct e1000_hw *);
+
+#endif
diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h
new file mode 100644
index 00000000000..f5fc5725ea9
--- /dev/null
+++ b/drivers/net/ethernet/intel/igb/e1000_defines.h
@@ -0,0 +1,838 @@
+/*******************************************************************************
+
+  Intel(R) Gigabit Ethernet Linux driver
+  Copyright(c) 2007-2011 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_DEFINES_H_
+#define _E1000_DEFINES_H_
+
+/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
+#define REQ_TX_DESCRIPTOR_MULTIPLE  8
+#define REQ_RX_DESCRIPTOR_MULTIPLE  8
+
+/* Definitions for power management and wakeup registers */
+/* Wake Up Control */
+#define E1000_WUC_PME_EN     0x00000002 /* PME Enable */
+
+/* Wake Up Filter Control */
+#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
+#define E1000_WUFC_MAG  0x00000002 /* Magic Packet Wakeup Enable */
+#define E1000_WUFC_EX   0x00000004 /* Directed Exact Wakeup Enable */
+#define E1000_WUFC_MC   0x00000008 /* Directed Multicast Wakeup Enable */
+#define E1000_WUFC_BC   0x00000010 /* Broadcast Wakeup Enable */
+
+/* Extended Device Control */
+#define E1000_CTRL_EXT_SDP3_DATA 0x00000080 /* Value of SW Defineable Pin 3 */
+/* Physical Func Reset Done Indication */
+#define E1000_CTRL_EXT_PFRSTD    0x00004000
+#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES  0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_1000BASE_KX  0x00400000
+#define E1000_CTRL_EXT_LINK_MODE_SGMII   0x00800000
+#define E1000_CTRL_EXT_LINK_MODE_GMII   0x00000000
+#define E1000_CTRL_EXT_EIAME          0x01000000
+#define E1000_CTRL_EXT_IRCA           0x00000001
+/* Interrupt delay cancellation */
+/* Driver loaded bit for FW */
+#define E1000_CTRL_EXT_DRV_LOAD       0x10000000
+/* Interrupt acknowledge Auto-mask */
+/* Clear Interrupt timers after IMS clear */
+/* packet buffer parity error detection enabled */
+/* descriptor FIFO parity error detection enable */
+#define E1000_CTRL_EXT_PBA_CLR        0x80000000 /* PBA Clear */
+#define E1000_I2CCMD_REG_ADDR_SHIFT   16
+#define E1000_I2CCMD_PHY_ADDR_SHIFT   24
+#define E1000_I2CCMD_OPCODE_READ      0x08000000
+#define E1000_I2CCMD_OPCODE_WRITE     0x00000000
+#define E1000_I2CCMD_READY            0x20000000
+#define E1000_I2CCMD_ERROR            0x80000000
+#define E1000_MAX_SGMII_PHY_REG_ADDR  255
+#define E1000_I2CCMD_PHY_TIMEOUT      200
+#define E1000_IVAR_VALID              0x80
+#define E1000_GPIE_NSICR              0x00000001
+#define E1000_GPIE_MSIX_MODE          0x00000010
+#define E1000_GPIE_EIAME              0x40000000
+#define E1000_GPIE_PBA                0x80000000
+
+/* Receive Descriptor bit definitions */
+#define E1000_RXD_STAT_DD       0x01    /* Descriptor Done */
+#define E1000_RXD_STAT_EOP      0x02    /* End of Packet */
+#define E1000_RXD_STAT_IXSM     0x04    /* Ignore checksum */
+#define E1000_RXD_STAT_VP       0x08    /* IEEE VLAN Packet */
+#define E1000_RXD_STAT_UDPCS    0x10    /* UDP xsum calculated */
+#define E1000_RXD_STAT_TCPCS    0x20    /* TCP xsum calculated */
+#define E1000_RXD_STAT_TS       0x10000 /* Pkt was time stamped */
+
+#define E1000_RXDEXT_STATERR_LB    0x00040000
+#define E1000_RXDEXT_STATERR_CE    0x01000000
+#define E1000_RXDEXT_STATERR_SE    0x02000000
+#define E1000_RXDEXT_STATERR_SEQ   0x04000000
+#define E1000_RXDEXT_STATERR_CXE   0x10000000
+#define E1000_RXDEXT_STATERR_TCPE  0x20000000
+#define E1000_RXDEXT_STATERR_IPE   0x40000000
+#define E1000_RXDEXT_STATERR_RXE   0x80000000
+
+/* Same mask, but for extended and packet split descriptors */
+#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
+    E1000_RXDEXT_STATERR_CE  |            \
+    E1000_RXDEXT_STATERR_SE  |            \
+    E1000_RXDEXT_STATERR_SEQ |            \
+    E1000_RXDEXT_STATERR_CXE |            \
+    E1000_RXDEXT_STATERR_RXE)
+
+#define E1000_MRQC_RSS_FIELD_IPV4_TCP          0x00010000
+#define E1000_MRQC_RSS_FIELD_IPV4              0x00020000
+#define E1000_MRQC_RSS_FIELD_IPV6_TCP_EX       0x00040000
+#define E1000_MRQC_RSS_FIELD_IPV6              0x00100000
+#define E1000_MRQC_RSS_FIELD_IPV6_TCP          0x00200000
+
+
+/* Management Control */
+#define E1000_MANC_SMBUS_EN      0x00000001 /* SMBus Enabled - RO */
+#define E1000_MANC_ASF_EN        0x00000002 /* ASF Enabled - RO */
+#define E1000_MANC_EN_BMC2OS     0x10000000 /* OSBMC is Enabled or not */
+/* Enable Neighbor Discovery Filtering */
+#define E1000_MANC_RCV_TCO_EN    0x00020000 /* Receive TCO Packets Enabled */
+#define E1000_MANC_BLK_PHY_RST_ON_IDE   0x00040000 /* Block phy resets */
+/* Enable MAC address filtering */
+#define E1000_MANC_EN_MAC_ADDR_FILTER   0x00100000
+
+/* Receive Control */
+#define E1000_RCTL_EN             0x00000002    /* enable */
+#define E1000_RCTL_SBP            0x00000004    /* store bad packet */
+#define E1000_RCTL_UPE            0x00000008    /* unicast promiscuous enable */
+#define E1000_RCTL_MPE            0x00000010    /* multicast promiscuous enab */
+#define E1000_RCTL_LPE            0x00000020    /* long packet enable */
+#define E1000_RCTL_LBM_MAC        0x00000040    /* MAC loopback mode */
+#define E1000_RCTL_LBM_TCVR       0x000000C0    /* tcvr loopback mode */
+#define E1000_RCTL_RDMTS_HALF     0x00000000    /* rx desc min threshold size */
+#define E1000_RCTL_MO_SHIFT       12            /* multicast offset shift */
+#define E1000_RCTL_BAM            0x00008000    /* broadcast enable */
+#define E1000_RCTL_SZ_512         0x00020000    /* rx buffer size 512 */
+#define E1000_RCTL_SZ_256         0x00030000    /* rx buffer size 256 */
+#define E1000_RCTL_VFE            0x00040000    /* vlan filter enable */
+#define E1000_RCTL_CFIEN          0x00080000    /* canonical form enable */
+#define E1000_RCTL_SECRC          0x04000000    /* Strip Ethernet CRC */
+
+/*
+ * Use byte values for the following shift parameters
+ * Usage:
+ *     psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) &
+ *                  E1000_PSRCTL_BSIZE0_MASK) |
+ *                ((ROUNDUP(value1, 1024) >> E1000_PSRCTL_BSIZE1_SHIFT) &
+ *                  E1000_PSRCTL_BSIZE1_MASK) |
+ *                ((ROUNDUP(value2, 1024) << E1000_PSRCTL_BSIZE2_SHIFT) &
+ *                  E1000_PSRCTL_BSIZE2_MASK) |
+ *                ((ROUNDUP(value3, 1024) << E1000_PSRCTL_BSIZE3_SHIFT) |;
+ *                  E1000_PSRCTL_BSIZE3_MASK))
+ * where value0 = [128..16256],  default=256
+ *       value1 = [1024..64512], default=4096
+ *       value2 = [0..64512],    default=4096
+ *       value3 = [0..64512],    default=0
+ */
+
+#define E1000_PSRCTL_BSIZE0_MASK   0x0000007F
+#define E1000_PSRCTL_BSIZE1_MASK   0x00003F00
+#define E1000_PSRCTL_BSIZE2_MASK   0x003F0000
+#define E1000_PSRCTL_BSIZE3_MASK   0x3F000000
+
+#define E1000_PSRCTL_BSIZE0_SHIFT  7            /* Shift _right_ 7 */
+#define E1000_PSRCTL_BSIZE1_SHIFT  2            /* Shift _right_ 2 */
+#define E1000_PSRCTL_BSIZE2_SHIFT  6            /* Shift _left_ 6 */
+#define E1000_PSRCTL_BSIZE3_SHIFT 14            /* Shift _left_ 14 */
+
+/* SWFW_SYNC Definitions */
+#define E1000_SWFW_EEP_SM   0x1
+#define E1000_SWFW_PHY0_SM  0x2
+#define E1000_SWFW_PHY1_SM  0x4
+#define E1000_SWFW_PHY2_SM  0x20
+#define E1000_SWFW_PHY3_SM  0x40
+
+/* FACTPS Definitions */
+/* Device Control */
+#define E1000_CTRL_FD       0x00000001  /* Full duplex.0=half; 1=full */
+#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master requests */
+#define E1000_CTRL_LRST     0x00000008  /* Link reset. 0=normal,1=reset */
+#define E1000_CTRL_ASDE     0x00000020  /* Auto-speed detect enable */
+#define E1000_CTRL_SLU      0x00000040  /* Set link up (Force Link) */
+#define E1000_CTRL_ILOS     0x00000080  /* Invert Loss-Of Signal */
+#define E1000_CTRL_SPD_SEL  0x00000300  /* Speed Select Mask */
+#define E1000_CTRL_SPD_100  0x00000100  /* Force 100Mb */
+#define E1000_CTRL_SPD_1000 0x00000200  /* Force 1Gb */
+#define E1000_CTRL_FRCSPD   0x00000800  /* Force Speed */
+#define E1000_CTRL_FRCDPX   0x00001000  /* Force Duplex */
+/* Defined polarity of Dock/Undock indication in SDP[0] */
+/* Reset both PHY ports, through PHYRST_N pin */
+/* enable link status from external LINK_0 and LINK_1 pins */
+#define E1000_CTRL_SWDPIN0  0x00040000  /* SWDPIN 0 value */
+#define E1000_CTRL_SWDPIN1  0x00080000  /* SWDPIN 1 value */
+#define E1000_CTRL_SWDPIO0  0x00400000  /* SWDPIN 0 Input or output */
+#define E1000_CTRL_RST      0x04000000  /* Global reset */
+#define E1000_CTRL_RFCE     0x08000000  /* Receive Flow Control enable */
+#define E1000_CTRL_TFCE     0x10000000  /* Transmit flow control enable */
+#define E1000_CTRL_VME      0x40000000  /* IEEE VLAN mode enable */
+#define E1000_CTRL_PHY_RST  0x80000000  /* PHY Reset */
+/* Initiate an interrupt to manageability engine */
+#define E1000_CTRL_I2C_ENA  0x02000000  /* I2C enable */
+
+/* Bit definitions for the Management Data IO (MDIO) and Management Data
+ * Clock (MDC) pins in the Device Control Register.
+ */
+
+#define E1000_CONNSW_ENRGSRC             0x4
+#define E1000_PCS_CFG_PCS_EN             8
+#define E1000_PCS_LCTL_FLV_LINK_UP       1
+#define E1000_PCS_LCTL_FSV_100           2
+#define E1000_PCS_LCTL_FSV_1000          4
+#define E1000_PCS_LCTL_FDV_FULL          8
+#define E1000_PCS_LCTL_FSD               0x10
+#define E1000_PCS_LCTL_FORCE_LINK        0x20
+#define E1000_PCS_LCTL_FORCE_FCTRL       0x80
+#define E1000_PCS_LCTL_AN_ENABLE         0x10000
+#define E1000_PCS_LCTL_AN_RESTART        0x20000
+#define E1000_PCS_LCTL_AN_TIMEOUT        0x40000
+#define E1000_ENABLE_SERDES_LOOPBACK     0x0410
+
+#define E1000_PCS_LSTS_LINK_OK           1
+#define E1000_PCS_LSTS_SPEED_100         2
+#define E1000_PCS_LSTS_SPEED_1000        4
+#define E1000_PCS_LSTS_DUPLEX_FULL       8
+#define E1000_PCS_LSTS_SYNK_OK           0x10
+
+/* Device Status */
+#define E1000_STATUS_FD         0x00000001      /* Full duplex.0=half,1=full */
+#define E1000_STATUS_LU         0x00000002      /* Link up.0=no,1=link */
+#define E1000_STATUS_FUNC_MASK  0x0000000C      /* PCI Function Mask */
+#define E1000_STATUS_FUNC_SHIFT 2
+#define E1000_STATUS_FUNC_1     0x00000004      /* Function 1 */
+#define E1000_STATUS_TXOFF      0x00000010      /* transmission paused */
+#define E1000_STATUS_SPEED_100  0x00000040      /* Speed 100Mb/s */
+#define E1000_STATUS_SPEED_1000 0x00000080      /* Speed 1000Mb/s */
+/* Change in Dock/Undock state. Clear on write '0'. */
+/* Status of Master requests. */
+#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000
+/* BMC external code execution disabled */
+
+/* Constants used to intrepret the masked PCI-X bus speed. */
+
+#define SPEED_10    10
+#define SPEED_100   100
+#define SPEED_1000  1000
+#define HALF_DUPLEX 1
+#define FULL_DUPLEX 2
+
+
+#define ADVERTISE_10_HALF                 0x0001
+#define ADVERTISE_10_FULL                 0x0002
+#define ADVERTISE_100_HALF                0x0004
+#define ADVERTISE_100_FULL                0x0008
+#define ADVERTISE_1000_HALF               0x0010 /* Not used, just FYI */
+#define ADVERTISE_1000_FULL               0x0020
+
+/* 1000/H is not supported, nor spec-compliant. */
+#define E1000_ALL_SPEED_DUPLEX (ADVERTISE_10_HALF  |  ADVERTISE_10_FULL | \
+				ADVERTISE_100_HALF |  ADVERTISE_100_FULL | \
+						      ADVERTISE_1000_FULL)
+#define E1000_ALL_NOT_GIG      (ADVERTISE_10_HALF  |  ADVERTISE_10_FULL | \
+				ADVERTISE_100_HALF |  ADVERTISE_100_FULL)
+#define E1000_ALL_100_SPEED    (ADVERTISE_100_HALF |  ADVERTISE_100_FULL)
+#define E1000_ALL_10_SPEED     (ADVERTISE_10_HALF  |  ADVERTISE_10_FULL)
+#define E1000_ALL_FULL_DUPLEX  (ADVERTISE_10_FULL  |  ADVERTISE_100_FULL | \
+						      ADVERTISE_1000_FULL)
+#define E1000_ALL_HALF_DUPLEX  (ADVERTISE_10_HALF  |  ADVERTISE_100_HALF)
+
+#define AUTONEG_ADVERTISE_SPEED_DEFAULT   E1000_ALL_SPEED_DUPLEX
+
+/* LED Control */
+#define E1000_LEDCTL_LED0_MODE_SHIFT      0
+#define E1000_LEDCTL_LED0_BLINK           0x00000080
+
+#define E1000_LEDCTL_MODE_LED_ON        0xE
+#define E1000_LEDCTL_MODE_LED_OFF       0xF
+
+/* Transmit Descriptor bit definitions */
+#define E1000_TXD_POPTS_IXSM 0x01       /* Insert IP checksum */
+#define E1000_TXD_POPTS_TXSM 0x02       /* Insert TCP/UDP checksum */
+#define E1000_TXD_CMD_EOP    0x01000000 /* End of Packet */
+#define E1000_TXD_CMD_IFCS   0x02000000 /* Insert FCS (Ethernet CRC) */
+#define E1000_TXD_CMD_RS     0x08000000 /* Report Status */
+#define E1000_TXD_CMD_DEXT   0x20000000 /* Descriptor extension (0 = legacy) */
+#define E1000_TXD_STAT_DD    0x00000001 /* Descriptor Done */
+/* Extended desc bits for Linksec and timesync */
+
+/* Transmit Control */
+#define E1000_TCTL_EN     0x00000002    /* enable tx */
+#define E1000_TCTL_PSP    0x00000008    /* pad short packets */
+#define E1000_TCTL_CT     0x00000ff0    /* collision threshold */
+#define E1000_TCTL_COLD   0x003ff000    /* collision distance */
+#define E1000_TCTL_RTLC   0x01000000    /* Re-transmit on late collision */
+
+/* DMA Coalescing register fields */
+#define E1000_DMACR_DMACWT_MASK         0x00003FFF /* DMA Coalescing
+							* Watchdog Timer */
+#define E1000_DMACR_DMACTHR_MASK        0x00FF0000 /* DMA Coalescing Receive
+							* Threshold */
+#define E1000_DMACR_DMACTHR_SHIFT       16
+#define E1000_DMACR_DMAC_LX_MASK        0x30000000 /* Lx when no PCIe
+							* transactions */
+#define E1000_DMACR_DMAC_LX_SHIFT       28
+#define E1000_DMACR_DMAC_EN             0x80000000 /* Enable DMA Coalescing */
+
+#define E1000_DMCTXTH_DMCTTHR_MASK      0x00000FFF /* DMA Coalescing Transmit
+							* Threshold */
+
+#define E1000_DMCTLX_TTLX_MASK          0x00000FFF /* Time to LX request */
+
+#define E1000_DMCRTRH_UTRESH_MASK       0x0007FFFF /* Receive Traffic Rate
+							* Threshold */
+#define E1000_DMCRTRH_LRPRCW            0x80000000 /* Rcv packet rate in
+							* current window */
+
+#define E1000_DMCCNT_CCOUNT_MASK        0x01FFFFFF /* DMA Coal Rcv Traffic
+							* Current Cnt */
+
+#define E1000_FCRTC_RTH_COAL_MASK       0x0003FFF0 /* Flow ctrl Rcv Threshold
+							* High val */
+#define E1000_FCRTC_RTH_COAL_SHIFT      4
+#define E1000_PCIEMISC_LX_DECISION      0x00000080 /* Lx power decision */
+
+/* SerDes Control */
+#define E1000_SCTL_DISABLE_SERDES_LOOPBACK 0x0400
+
+/* Receive Checksum Control */
+#define E1000_RXCSUM_IPOFL     0x00000100   /* IPv4 checksum offload */
+#define E1000_RXCSUM_TUOFL     0x00000200   /* TCP / UDP checksum offload */
+#define E1000_RXCSUM_CRCOFL    0x00000800   /* CRC32 offload enable */
+#define E1000_RXCSUM_PCSD      0x00002000   /* packet checksum disabled */
+
+/* Header split receive */
+#define E1000_RFCTL_LEF        0x00040000
+
+/* Collision related configuration parameters */
+#define E1000_COLLISION_THRESHOLD       15
+#define E1000_CT_SHIFT                  4
+#define E1000_COLLISION_DISTANCE        63
+#define E1000_COLD_SHIFT                12
+
+/* Ethertype field values */
+#define ETHERNET_IEEE_VLAN_TYPE 0x8100  /* 802.3ac packet */
+
+#define MAX_JUMBO_FRAME_SIZE    0x3F00
+
+/* PBA constants */
+#define E1000_PBA_34K 0x0022
+#define E1000_PBA_64K 0x0040    /* 64KB */
+
+/* SW Semaphore Register */
+#define E1000_SWSM_SMBI         0x00000001 /* Driver Semaphore bit */
+#define E1000_SWSM_SWESMBI      0x00000002 /* FW Semaphore bit */
+
+/* Interrupt Cause Read */
+#define E1000_ICR_TXDW          0x00000001 /* Transmit desc written back */
+#define E1000_ICR_LSC           0x00000004 /* Link Status Change */
+#define E1000_ICR_RXSEQ         0x00000008 /* rx sequence error */
+#define E1000_ICR_RXDMT0        0x00000010 /* rx desc min. threshold (0) */
+#define E1000_ICR_RXT0          0x00000080 /* rx timer intr (ring 0) */
+#define E1000_ICR_VMMB          0x00000100 /* VM MB event */
+#define E1000_ICR_DRSTA         0x40000000 /* Device Reset Asserted */
+/* If this bit asserted, the driver should claim the interrupt */
+#define E1000_ICR_INT_ASSERTED  0x80000000
+/* LAN connected device generates an interrupt */
+#define E1000_ICR_DOUTSYNC      0x10000000 /* NIC DMA out of sync */
+
+/* Extended Interrupt Cause Read */
+#define E1000_EICR_RX_QUEUE0    0x00000001 /* Rx Queue 0 Interrupt */
+#define E1000_EICR_RX_QUEUE1    0x00000002 /* Rx Queue 1 Interrupt */
+#define E1000_EICR_RX_QUEUE2    0x00000004 /* Rx Queue 2 Interrupt */
+#define E1000_EICR_RX_QUEUE3    0x00000008 /* Rx Queue 3 Interrupt */
+#define E1000_EICR_TX_QUEUE0    0x00000100 /* Tx Queue 0 Interrupt */
+#define E1000_EICR_TX_QUEUE1    0x00000200 /* Tx Queue 1 Interrupt */
+#define E1000_EICR_TX_QUEUE2    0x00000400 /* Tx Queue 2 Interrupt */
+#define E1000_EICR_TX_QUEUE3    0x00000800 /* Tx Queue 3 Interrupt */
+#define E1000_EICR_OTHER        0x80000000 /* Interrupt Cause Active */
+/* TCP Timer */
+
+/*
+ * This defines the bits that are set in the Interrupt Mask
+ * Set/Read Register.  Each bit is documented below:
+ *   o RXT0   = Receiver Timer Interrupt (ring 0)
+ *   o TXDW   = Transmit Descriptor Written Back
+ *   o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
+ *   o RXSEQ  = Receive Sequence Error
+ *   o LSC    = Link Status Change
+ */
+#define IMS_ENABLE_MASK ( \
+    E1000_IMS_RXT0   |    \
+    E1000_IMS_TXDW   |    \
+    E1000_IMS_RXDMT0 |    \
+    E1000_IMS_RXSEQ  |    \
+    E1000_IMS_LSC    |    \
+    E1000_IMS_DOUTSYNC)
+
+/* Interrupt Mask Set */
+#define E1000_IMS_TXDW      E1000_ICR_TXDW      /* Transmit desc written back */
+#define E1000_IMS_LSC       E1000_ICR_LSC       /* Link Status Change */
+#define E1000_IMS_VMMB      E1000_ICR_VMMB      /* Mail box activity */
+#define E1000_IMS_RXSEQ     E1000_ICR_RXSEQ     /* rx sequence error */
+#define E1000_IMS_RXDMT0    E1000_ICR_RXDMT0    /* rx desc min. threshold */
+#define E1000_IMS_RXT0      E1000_ICR_RXT0      /* rx timer intr */
+#define E1000_IMS_DRSTA     E1000_ICR_DRSTA     /* Device Reset Asserted */
+#define E1000_IMS_DOUTSYNC  E1000_ICR_DOUTSYNC /* NIC DMA out of sync */
+
+/* Extended Interrupt Mask Set */
+#define E1000_EIMS_OTHER        E1000_EICR_OTHER   /* Interrupt Cause Active */
+
+/* Interrupt Cause Set */
+#define E1000_ICS_LSC       E1000_ICR_LSC       /* Link Status Change */
+#define E1000_ICS_RXDMT0    E1000_ICR_RXDMT0    /* rx desc min. threshold */
+#define E1000_ICS_DRSTA     E1000_ICR_DRSTA     /* Device Reset Aserted */
+
+/* Extended Interrupt Cause Set */
+/* E1000_EITR_CNT_IGNR is only for 82576 and newer */
+#define E1000_EITR_CNT_IGNR     0x80000000 /* Don't reset counters on write */
+
+
+/* Transmit Descriptor Control */
+/* Enable the counting of descriptors still to be processed. */
+
+/* Flow Control Constants */
+#define FLOW_CONTROL_ADDRESS_LOW  0x00C28001
+#define FLOW_CONTROL_ADDRESS_HIGH 0x00000100
+#define FLOW_CONTROL_TYPE         0x8808
+
+/* 802.1q VLAN Packet Size */
+#define VLAN_TAG_SIZE              4    /* 802.3ac tag (not DMA'd) */
+#define E1000_VLAN_FILTER_TBL_SIZE 128  /* VLAN Filter Table (4096 bits) */
+
+/* Receive Address */
+/*
+ * Number of high/low register pairs in the RAR. The RAR (Receive Address
+ * Registers) holds the directed and multicast addresses that we monitor.
+ * Technically, we have 16 spots.  However, we reserve one of these spots
+ * (RAR[15]) for our directed address used by controllers with
+ * manageability enabled, allowing us room for 15 multicast addresses.
+ */
+#define E1000_RAH_AV  0x80000000        /* Receive descriptor valid */
+#define E1000_RAL_MAC_ADDR_LEN 4
+#define E1000_RAH_MAC_ADDR_LEN 2
+#define E1000_RAH_POOL_MASK 0x03FC0000
+#define E1000_RAH_POOL_1 0x00040000
+
+/* Error Codes */
+#define E1000_SUCCESS      0
+#define E1000_ERR_NVM      1
+#define E1000_ERR_PHY      2
+#define E1000_ERR_CONFIG   3
+#define E1000_ERR_PARAM    4
+#define E1000_ERR_MAC_INIT 5
+#define E1000_ERR_RESET   9
+#define E1000_ERR_MASTER_REQUESTS_PENDING 10
+#define E1000_BLK_PHY_RESET   12
+#define E1000_ERR_SWFW_SYNC 13
+#define E1000_NOT_IMPLEMENTED 14
+#define E1000_ERR_MBX      15
+#define E1000_ERR_INVALID_ARGUMENT  16
+#define E1000_ERR_NO_SPACE          17
+#define E1000_ERR_NVM_PBA_SECTION   18
+
+/* Loop limit on how long we wait for auto-negotiation to complete */
+#define COPPER_LINK_UP_LIMIT              10
+#define PHY_AUTO_NEG_LIMIT                45
+#define PHY_FORCE_LIMIT                   20
+/* Number of 100 microseconds we wait for PCI Express master disable */
+#define MASTER_DISABLE_TIMEOUT      800
+/* Number of milliseconds we wait for PHY configuration done after MAC reset */
+#define PHY_CFG_TIMEOUT             100
+/* Number of 2 milliseconds we wait for acquiring MDIO ownership. */
+/* Number of milliseconds for NVM auto read done after MAC reset. */
+#define AUTO_READ_DONE_TIMEOUT      10
+
+/* Flow Control */
+#define E1000_FCRTL_XONE 0x80000000     /* Enable XON frame transmission */
+
+#define E1000_TSYNCTXCTL_VALID    0x00000001 /* tx timestamp valid */
+#define E1000_TSYNCTXCTL_ENABLED  0x00000010 /* enable tx timestampping */
+
+#define E1000_TSYNCRXCTL_VALID      0x00000001 /* rx timestamp valid */
+#define E1000_TSYNCRXCTL_TYPE_MASK  0x0000000E /* rx type mask */
+#define E1000_TSYNCRXCTL_TYPE_L2_V2       0x00
+#define E1000_TSYNCRXCTL_TYPE_L4_V1       0x02
+#define E1000_TSYNCRXCTL_TYPE_L2_L4_V2    0x04
+#define E1000_TSYNCRXCTL_TYPE_ALL         0x08
+#define E1000_TSYNCRXCTL_TYPE_EVENT_V2    0x0A
+#define E1000_TSYNCRXCTL_ENABLED    0x00000010 /* enable rx timestampping */
+
+#define E1000_TSYNCRXCFG_PTP_V1_CTRLT_MASK   0x000000FF
+#define E1000_TSYNCRXCFG_PTP_V1_SYNC_MESSAGE       0x00
+#define E1000_TSYNCRXCFG_PTP_V1_DELAY_REQ_MESSAGE  0x01
+#define E1000_TSYNCRXCFG_PTP_V1_FOLLOWUP_MESSAGE   0x02
+#define E1000_TSYNCRXCFG_PTP_V1_DELAY_RESP_MESSAGE 0x03
+#define E1000_TSYNCRXCFG_PTP_V1_MANAGEMENT_MESSAGE 0x04
+
+#define E1000_TSYNCRXCFG_PTP_V2_MSGID_MASK               0x00000F00
+#define E1000_TSYNCRXCFG_PTP_V2_SYNC_MESSAGE                 0x0000
+#define E1000_TSYNCRXCFG_PTP_V2_DELAY_REQ_MESSAGE            0x0100
+#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_REQ_MESSAGE       0x0200
+#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_RESP_MESSAGE      0x0300
+#define E1000_TSYNCRXCFG_PTP_V2_FOLLOWUP_MESSAGE             0x0800
+#define E1000_TSYNCRXCFG_PTP_V2_DELAY_RESP_MESSAGE           0x0900
+#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_FOLLOWUP_MESSAGE  0x0A00
+#define E1000_TSYNCRXCFG_PTP_V2_ANNOUNCE_MESSAGE             0x0B00
+#define E1000_TSYNCRXCFG_PTP_V2_SIGNALLING_MESSAGE           0x0C00
+#define E1000_TSYNCRXCFG_PTP_V2_MANAGEMENT_MESSAGE           0x0D00
+
+#define E1000_TIMINCA_16NS_SHIFT 24
+
+#define E1000_MDICNFG_EXT_MDIO    0x80000000      /* MDI ext/int destination */
+#define E1000_MDICNFG_COM_MDIO    0x40000000      /* MDI shared w/ lan 0 */
+#define E1000_MDICNFG_PHY_MASK    0x03E00000
+#define E1000_MDICNFG_PHY_SHIFT   21
+
+/* PCI Express Control */
+#define E1000_GCR_CMPL_TMOUT_MASK       0x0000F000
+#define E1000_GCR_CMPL_TMOUT_10ms       0x00001000
+#define E1000_GCR_CMPL_TMOUT_RESEND     0x00010000
+#define E1000_GCR_CAP_VER2              0x00040000
+
+/* mPHY Address Control and Data Registers */
+#define E1000_MPHY_ADDR_CTL          0x0024 /* mPHY Address Control Register */
+#define E1000_MPHY_ADDR_CTL_OFFSET_MASK 0xFFFF0000
+#define E1000_MPHY_DATA                 0x0E10 /* mPHY Data Register */
+
+/* mPHY PCS CLK Register */
+#define E1000_MPHY_PCS_CLK_REG_OFFSET  0x0004 /* mPHY PCS CLK AFE CSR Offset */
+/* mPHY Near End Digital Loopback Override Bit */
+#define E1000_MPHY_PCS_CLK_REG_DIGINELBEN 0x10
+
+/* PHY Control Register */
+#define MII_CR_FULL_DUPLEX      0x0100  /* FDX =1, half duplex =0 */
+#define MII_CR_RESTART_AUTO_NEG 0x0200  /* Restart auto negotiation */
+#define MII_CR_POWER_DOWN       0x0800  /* Power down */
+#define MII_CR_AUTO_NEG_EN      0x1000  /* Auto Neg Enable */
+#define MII_CR_LOOPBACK         0x4000  /* 0 = normal, 1 = loopback */
+#define MII_CR_RESET            0x8000  /* 0 = normal, 1 = PHY reset */
+#define MII_CR_SPEED_1000       0x0040
+#define MII_CR_SPEED_100        0x2000
+#define MII_CR_SPEED_10         0x0000
+
+/* PHY Status Register */
+#define MII_SR_LINK_STATUS       0x0004 /* Link Status 1 = link */
+#define MII_SR_AUTONEG_COMPLETE  0x0020 /* Auto Neg Complete */
+
+/* Autoneg Advertisement Register */
+#define NWAY_AR_10T_HD_CAPS      0x0020   /* 10T   Half Duplex Capable */
+#define NWAY_AR_10T_FD_CAPS      0x0040   /* 10T   Full Duplex Capable */
+#define NWAY_AR_100TX_HD_CAPS    0x0080   /* 100TX Half Duplex Capable */
+#define NWAY_AR_100TX_FD_CAPS    0x0100   /* 100TX Full Duplex Capable */
+#define NWAY_AR_PAUSE            0x0400   /* Pause operation desired */
+#define NWAY_AR_ASM_DIR          0x0800   /* Asymmetric Pause Direction bit */
+
+/* Link Partner Ability Register (Base Page) */
+#define NWAY_LPAR_PAUSE          0x0400 /* LP Pause operation desired */
+#define NWAY_LPAR_ASM_DIR        0x0800 /* LP Asymmetric Pause Direction bit */
+
+/* Autoneg Expansion Register */
+
+/* 1000BASE-T Control Register */
+#define CR_1000T_HD_CAPS         0x0100 /* Advertise 1000T HD capability */
+#define CR_1000T_FD_CAPS         0x0200 /* Advertise 1000T FD capability  */
+#define CR_1000T_MS_VALUE        0x0800 /* 1=Configure PHY as Master */
+					/* 0=Configure PHY as Slave */
+#define CR_1000T_MS_ENABLE       0x1000 /* 1=Master/Slave manual config value */
+					/* 0=Automatic Master/Slave config */
+
+/* 1000BASE-T Status Register */
+#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */
+#define SR_1000T_LOCAL_RX_STATUS  0x2000 /* Local receiver OK */
+
+
+/* PHY 1000 MII Register/Bit Definitions */
+/* PHY Registers defined by IEEE */
+#define PHY_CONTROL      0x00 /* Control Register */
+#define PHY_STATUS       0x01 /* Status Register */
+#define PHY_ID1          0x02 /* Phy Id Reg (word 1) */
+#define PHY_ID2          0x03 /* Phy Id Reg (word 2) */
+#define PHY_AUTONEG_ADV  0x04 /* Autoneg Advertisement */
+#define PHY_LP_ABILITY   0x05 /* Link Partner Ability (Base Page) */
+#define PHY_1000T_CTRL   0x09 /* 1000Base-T Control Reg */
+#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
+
+/* NVM Control */
+#define E1000_EECD_SK        0x00000001 /* NVM Clock */
+#define E1000_EECD_CS        0x00000002 /* NVM Chip Select */
+#define E1000_EECD_DI        0x00000004 /* NVM Data In */
+#define E1000_EECD_DO        0x00000008 /* NVM Data Out */
+#define E1000_EECD_REQ       0x00000040 /* NVM Access Request */
+#define E1000_EECD_GNT       0x00000080 /* NVM Access Grant */
+#define E1000_EECD_PRES      0x00000100 /* NVM Present */
+/* NVM Addressing bits based on type 0=small, 1=large */
+#define E1000_EECD_ADDR_BITS 0x00000400
+#define E1000_NVM_GRANT_ATTEMPTS   1000 /* NVM # attempts to gain grant */
+#define E1000_EECD_AUTO_RD          0x00000200  /* NVM Auto Read done */
+#define E1000_EECD_SIZE_EX_MASK     0x00007800  /* NVM Size */
+#define E1000_EECD_SIZE_EX_SHIFT     11
+
+/* Offset to data in NVM read/write registers */
+#define E1000_NVM_RW_REG_DATA   16
+#define E1000_NVM_RW_REG_DONE   2    /* Offset to READ/WRITE done bit */
+#define E1000_NVM_RW_REG_START  1    /* Start operation */
+#define E1000_NVM_RW_ADDR_SHIFT 2    /* Shift to the address bits */
+#define E1000_NVM_POLL_READ     0    /* Flag for polling for read complete */
+
+/* NVM Word Offsets */
+#define NVM_COMPAT                 0x0003
+#define NVM_ID_LED_SETTINGS        0x0004 /* SERDES output amplitude */
+#define NVM_INIT_CONTROL2_REG      0x000F
+#define NVM_INIT_CONTROL3_PORT_B   0x0014
+#define NVM_INIT_CONTROL3_PORT_A   0x0024
+#define NVM_ALT_MAC_ADDR_PTR       0x0037
+#define NVM_CHECKSUM_REG           0x003F
+#define NVM_COMPATIBILITY_REG_3    0x0003
+#define NVM_COMPATIBILITY_BIT_MASK 0x8000
+
+#define E1000_NVM_CFG_DONE_PORT_0  0x040000 /* MNG config cycle done */
+#define E1000_NVM_CFG_DONE_PORT_1  0x080000 /* ...for second port */
+#define E1000_NVM_CFG_DONE_PORT_2  0x100000 /* ...for third port */
+#define E1000_NVM_CFG_DONE_PORT_3  0x200000 /* ...for fourth port */
+
+#define NVM_82580_LAN_FUNC_OFFSET(a) (a ? (0x40 + (0x40 * a)) : 0)
+
+/* Mask bits for fields in Word 0x24 of the NVM */
+#define NVM_WORD24_COM_MDIO         0x0008 /* MDIO interface shared */
+#define NVM_WORD24_EXT_MDIO         0x0004 /* MDIO accesses routed external */
+
+/* Mask bits for fields in Word 0x0f of the NVM */
+#define NVM_WORD0F_PAUSE_MASK       0x3000
+#define NVM_WORD0F_ASM_DIR          0x2000
+
+/* Mask bits for fields in Word 0x1a of the NVM */
+
+/* length of string needed to store part num */
+#define E1000_PBANUM_LENGTH         11
+
+/* For checksumming, the sum of all words in the NVM should equal 0xBABA. */
+#define NVM_SUM                    0xBABA
+
+#define NVM_PBA_OFFSET_0           8
+#define NVM_PBA_OFFSET_1           9
+#define NVM_PBA_PTR_GUARD          0xFAFA
+#define NVM_WORD_SIZE_BASE_SHIFT   6
+
+/* NVM Commands - Microwire */
+
+/* NVM Commands - SPI */
+#define NVM_MAX_RETRY_SPI          5000 /* Max wait of 5ms, for RDY signal */
+#define NVM_WRITE_OPCODE_SPI       0x02 /* NVM write opcode */
+#define NVM_READ_OPCODE_SPI        0x03 /* NVM read opcode */
+#define NVM_A8_OPCODE_SPI          0x08 /* opcode bit-3 = address bit-8 */
+#define NVM_WREN_OPCODE_SPI        0x06 /* NVM set Write Enable latch */
+#define NVM_RDSR_OPCODE_SPI        0x05 /* NVM read Status register */
+
+/* SPI NVM Status Register */
+#define NVM_STATUS_RDY_SPI         0x01
+
+/* Word definitions for ID LED Settings */
+#define ID_LED_RESERVED_0000 0x0000
+#define ID_LED_RESERVED_FFFF 0xFFFF
+#define ID_LED_DEFAULT       ((ID_LED_OFF1_ON2  << 12) | \
+			      (ID_LED_OFF1_OFF2 <<  8) | \
+			      (ID_LED_DEF1_DEF2 <<  4) | \
+			      (ID_LED_DEF1_DEF2))
+#define ID_LED_DEF1_DEF2     0x1
+#define ID_LED_DEF1_ON2      0x2
+#define ID_LED_DEF1_OFF2     0x3
+#define ID_LED_ON1_DEF2      0x4
+#define ID_LED_ON1_ON2       0x5
+#define ID_LED_ON1_OFF2      0x6
+#define ID_LED_OFF1_DEF2     0x7
+#define ID_LED_OFF1_ON2      0x8
+#define ID_LED_OFF1_OFF2     0x9
+
+#define IGP_ACTIVITY_LED_MASK   0xFFFFF0FF
+#define IGP_ACTIVITY_LED_ENABLE 0x0300
+#define IGP_LED3_MODE           0x07000000
+
+/* PCI/PCI-X/PCI-EX Config space */
+#define PCIE_DEVICE_CONTROL2         0x28
+#define PCIE_DEVICE_CONTROL2_16ms    0x0005
+
+#define PHY_REVISION_MASK      0xFFFFFFF0
+#define MAX_PHY_REG_ADDRESS    0x1F  /* 5 bit address bus (0-0x1F) */
+#define MAX_PHY_MULTI_PAGE_REG 0xF
+
+/* Bit definitions for valid PHY IDs. */
+/*
+ * I = Integrated
+ * E = External
+ */
+#define M88E1111_I_PHY_ID    0x01410CC0
+#define M88E1112_E_PHY_ID    0x01410C90
+#define I347AT4_E_PHY_ID     0x01410DC0
+#define IGP03E1000_E_PHY_ID  0x02A80390
+#define I82580_I_PHY_ID      0x015403A0
+#define I350_I_PHY_ID        0x015403B0
+#define M88_VENDOR           0x0141
+
+/* M88E1000 Specific Registers */
+#define M88E1000_PHY_SPEC_CTRL     0x10  /* PHY Specific Control Register */
+#define M88E1000_PHY_SPEC_STATUS   0x11  /* PHY Specific Status Register */
+#define M88E1000_EXT_PHY_SPEC_CTRL 0x14  /* Extended PHY Specific Control */
+
+#define M88E1000_PHY_PAGE_SELECT   0x1D  /* Reg 29 for page number setting */
+#define M88E1000_PHY_GEN_CONTROL   0x1E  /* Its meaning depends on reg 29 */
+
+/* M88E1000 PHY Specific Control Register */
+#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */
+/* 1=CLK125 low, 0=CLK125 toggling */
+#define M88E1000_PSCR_MDI_MANUAL_MODE  0x0000  /* MDI Crossover Mode bits 6:5 */
+					       /* Manual MDI configuration */
+#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020  /* Manual MDIX configuration */
+/* 1000BASE-T: Auto crossover, 100BASE-TX/10BASE-T: MDI Mode */
+#define M88E1000_PSCR_AUTO_X_1000T     0x0040
+/* Auto crossover enabled all speeds */
+#define M88E1000_PSCR_AUTO_X_MODE      0x0060
+/*
+ * 1=Enable Extended 10BASE-T distance (Lower 10BASE-T Rx Threshold
+ * 0=Normal 10BASE-T Rx Threshold
+ */
+/* 1=5-bit interface in 100BASE-TX, 0=MII interface in 100BASE-TX */
+#define M88E1000_PSCR_ASSERT_CRS_ON_TX     0x0800 /* 1=Assert CRS on Transmit */
+
+/* M88E1000 PHY Specific Status Register */
+#define M88E1000_PSSR_REV_POLARITY       0x0002 /* 1=Polarity reversed */
+#define M88E1000_PSSR_DOWNSHIFT          0x0020 /* 1=Downshifted */
+#define M88E1000_PSSR_MDIX               0x0040 /* 1=MDIX; 0=MDI */
+/*
+ * 0 = <50M
+ * 1 = 50-80M
+ * 2 = 80-110M
+ * 3 = 110-140M
+ * 4 = >140M
+ */
+#define M88E1000_PSSR_CABLE_LENGTH       0x0380
+#define M88E1000_PSSR_SPEED              0xC000 /* Speed, bits 14:15 */
+#define M88E1000_PSSR_1000MBS            0x8000 /* 10=1000Mbs */
+
+#define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7
+
+/* M88E1000 Extended PHY Specific Control Register */
+/*
+ * 1 = Lost lock detect enabled.
+ * Will assert lost lock and bring
+ * link down if idle not seen
+ * within 1ms in 1000BASE-T
+ */
+/*
+ * Number of times we will attempt to autonegotiate before downshifting if we
+ * are the master
+ */
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X   0x0000
+/*
+ * Number of times we will attempt to autonegotiate before downshifting if we
+ * are the slave
+ */
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK  0x0300
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X    0x0100
+#define M88E1000_EPSCR_TX_CLK_25      0x0070 /* 25  MHz TX_CLK */
+
+/* Intel i347-AT4 Registers */
+
+#define I347AT4_PCDL                   0x10 /* PHY Cable Diagnostics Length */
+#define I347AT4_PCDC                   0x15 /* PHY Cable Diagnostics Control */
+#define I347AT4_PAGE_SELECT            0x16
+
+/* i347-AT4 Extended PHY Specific Control Register */
+
+/*
+ *  Number of times we will attempt to autonegotiate before downshifting if we
+ *  are the master
+ */
+#define I347AT4_PSCR_DOWNSHIFT_ENABLE 0x0800
+#define I347AT4_PSCR_DOWNSHIFT_MASK   0x7000
+#define I347AT4_PSCR_DOWNSHIFT_1X     0x0000
+#define I347AT4_PSCR_DOWNSHIFT_2X     0x1000
+#define I347AT4_PSCR_DOWNSHIFT_3X     0x2000
+#define I347AT4_PSCR_DOWNSHIFT_4X     0x3000
+#define I347AT4_PSCR_DOWNSHIFT_5X     0x4000
+#define I347AT4_PSCR_DOWNSHIFT_6X     0x5000
+#define I347AT4_PSCR_DOWNSHIFT_7X     0x6000
+#define I347AT4_PSCR_DOWNSHIFT_8X     0x7000
+
+/* i347-AT4 PHY Cable Diagnostics Control */
+#define I347AT4_PCDC_CABLE_LENGTH_UNIT 0x0400 /* 0=cm 1=meters */
+
+/* Marvell 1112 only registers */
+#define M88E1112_VCT_DSP_DISTANCE       0x001A
+
+/* M88EC018 Rev 2 specific DownShift settings */
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK  0x0E00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X    0x0800
+
+/* MDI Control */
+#define E1000_MDIC_DATA_MASK 0x0000FFFF
+#define E1000_MDIC_REG_MASK  0x001F0000
+#define E1000_MDIC_REG_SHIFT 16
+#define E1000_MDIC_PHY_MASK  0x03E00000
+#define E1000_MDIC_PHY_SHIFT 21
+#define E1000_MDIC_OP_WRITE  0x04000000
+#define E1000_MDIC_OP_READ   0x08000000
+#define E1000_MDIC_READY     0x10000000
+#define E1000_MDIC_INT_EN    0x20000000
+#define E1000_MDIC_ERROR     0x40000000
+#define E1000_MDIC_DEST      0x80000000
+
+/* Thermal Sensor */
+#define E1000_THSTAT_PWR_DOWN       0x00000001 /* Power Down Event */
+#define E1000_THSTAT_LINK_THROTTLE  0x00000002 /* Link Speed Throttle Event */
+
+/* Energy Efficient Ethernet */
+#define E1000_IPCNFG_EEE_1G_AN       0x00000008  /* EEE Enable 1G AN */
+#define E1000_IPCNFG_EEE_100M_AN     0x00000004  /* EEE Enable 100M AN */
+#define E1000_EEER_TX_LPI_EN         0x00010000  /* EEE Tx LPI Enable */
+#define E1000_EEER_RX_LPI_EN         0x00020000  /* EEE Rx LPI Enable */
+#define E1000_EEER_LPI_FC            0x00040000  /* EEE Enable on FC */
+
+/* SerDes Control */
+#define E1000_GEN_CTL_READY             0x80000000
+#define E1000_GEN_CTL_ADDRESS_SHIFT     8
+#define E1000_GEN_POLL_TIMEOUT          640
+
+#define E1000_VFTA_ENTRY_SHIFT               5
+#define E1000_VFTA_ENTRY_MASK                0x7F
+#define E1000_VFTA_ENTRY_BIT_SHIFT_MASK      0x1F
+
+/* DMA Coalescing register fields */
+#define E1000_PCIEMISC_LX_DECISION      0x00000080 /* Lx power decision based
+                                                      on DMA coal */
+
+/* Tx Rate-Scheduler Config fields */
+#define E1000_RTTBCNRC_RS_ENA		0x80000000
+#define E1000_RTTBCNRC_RF_DEC_MASK	0x00003FFF
+#define E1000_RTTBCNRC_RF_INT_SHIFT	14
+#define E1000_RTTBCNRC_RF_INT_MASK	\
+	(E1000_RTTBCNRC_RF_DEC_MASK << E1000_RTTBCNRC_RF_INT_SHIFT)
+
+#endif
diff --git a/drivers/net/ethernet/intel/igb/e1000_hw.h b/drivers/net/ethernet/intel/igb/e1000_hw.h
new file mode 100644
index 00000000000..4519a136717
--- /dev/null
+++ b/drivers/net/ethernet/intel/igb/e1000_hw.h
@@ -0,0 +1,529 @@
+/*******************************************************************************
+
+  Intel(R) Gigabit Ethernet Linux driver
+  Copyright(c) 2007-2011 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_HW_H_
+#define _E1000_HW_H_
+
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/netdevice.h>
+
+#include "e1000_regs.h"
+#include "e1000_defines.h"
+
+struct e1000_hw;
+
+#define E1000_DEV_ID_82576                    0x10C9
+#define E1000_DEV_ID_82576_FIBER              0x10E6
+#define E1000_DEV_ID_82576_SERDES             0x10E7
+#define E1000_DEV_ID_82576_QUAD_COPPER        0x10E8
+#define E1000_DEV_ID_82576_QUAD_COPPER_ET2    0x1526
+#define E1000_DEV_ID_82576_NS                 0x150A
+#define E1000_DEV_ID_82576_NS_SERDES          0x1518
+#define E1000_DEV_ID_82576_SERDES_QUAD        0x150D
+#define E1000_DEV_ID_82575EB_COPPER           0x10A7
+#define E1000_DEV_ID_82575EB_FIBER_SERDES     0x10A9
+#define E1000_DEV_ID_82575GB_QUAD_COPPER      0x10D6
+#define E1000_DEV_ID_82580_COPPER             0x150E
+#define E1000_DEV_ID_82580_FIBER              0x150F
+#define E1000_DEV_ID_82580_SERDES             0x1510
+#define E1000_DEV_ID_82580_SGMII              0x1511
+#define E1000_DEV_ID_82580_COPPER_DUAL        0x1516
+#define E1000_DEV_ID_82580_QUAD_FIBER         0x1527
+#define E1000_DEV_ID_DH89XXCC_SGMII           0x0438
+#define E1000_DEV_ID_DH89XXCC_SERDES          0x043A
+#define E1000_DEV_ID_DH89XXCC_BACKPLANE       0x043C
+#define E1000_DEV_ID_DH89XXCC_SFP             0x0440
+#define E1000_DEV_ID_I350_COPPER              0x1521
+#define E1000_DEV_ID_I350_FIBER               0x1522
+#define E1000_DEV_ID_I350_SERDES              0x1523
+#define E1000_DEV_ID_I350_SGMII               0x1524
+
+#define E1000_REVISION_2 2
+#define E1000_REVISION_4 4
+
+#define E1000_FUNC_0     0
+#define E1000_FUNC_1     1
+#define E1000_FUNC_2     2
+#define E1000_FUNC_3     3
+
+#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN0   0
+#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN1   3
+#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN2   6
+#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN3   9
+
+enum e1000_mac_type {
+	e1000_undefined = 0,
+	e1000_82575,
+	e1000_82576,
+	e1000_82580,
+	e1000_i350,
+	e1000_num_macs  /* List is 1-based, so subtract 1 for true count. */
+};
+
+enum e1000_media_type {
+	e1000_media_type_unknown = 0,
+	e1000_media_type_copper = 1,
+	e1000_media_type_internal_serdes = 2,
+	e1000_num_media_types
+};
+
+enum e1000_nvm_type {
+	e1000_nvm_unknown = 0,
+	e1000_nvm_none,
+	e1000_nvm_eeprom_spi,
+	e1000_nvm_flash_hw,
+	e1000_nvm_flash_sw
+};
+
+enum e1000_nvm_override {
+	e1000_nvm_override_none = 0,
+	e1000_nvm_override_spi_small,
+	e1000_nvm_override_spi_large,
+};
+
+enum e1000_phy_type {
+	e1000_phy_unknown = 0,
+	e1000_phy_none,
+	e1000_phy_m88,
+	e1000_phy_igp,
+	e1000_phy_igp_2,
+	e1000_phy_gg82563,
+	e1000_phy_igp_3,
+	e1000_phy_ife,
+	e1000_phy_82580,
+};
+
+enum e1000_bus_type {
+	e1000_bus_type_unknown = 0,
+	e1000_bus_type_pci,
+	e1000_bus_type_pcix,
+	e1000_bus_type_pci_express,
+	e1000_bus_type_reserved
+};
+
+enum e1000_bus_speed {
+	e1000_bus_speed_unknown = 0,
+	e1000_bus_speed_33,
+	e1000_bus_speed_66,
+	e1000_bus_speed_100,
+	e1000_bus_speed_120,
+	e1000_bus_speed_133,
+	e1000_bus_speed_2500,
+	e1000_bus_speed_5000,
+	e1000_bus_speed_reserved
+};
+
+enum e1000_bus_width {
+	e1000_bus_width_unknown = 0,
+	e1000_bus_width_pcie_x1,
+	e1000_bus_width_pcie_x2,
+	e1000_bus_width_pcie_x4 = 4,
+	e1000_bus_width_pcie_x8 = 8,
+	e1000_bus_width_32,
+	e1000_bus_width_64,
+	e1000_bus_width_reserved
+};
+
+enum e1000_1000t_rx_status {
+	e1000_1000t_rx_status_not_ok = 0,
+	e1000_1000t_rx_status_ok,
+	e1000_1000t_rx_status_undefined = 0xFF
+};
+
+enum e1000_rev_polarity {
+	e1000_rev_polarity_normal = 0,
+	e1000_rev_polarity_reversed,
+	e1000_rev_polarity_undefined = 0xFF
+};
+
+enum e1000_fc_mode {
+	e1000_fc_none = 0,
+	e1000_fc_rx_pause,
+	e1000_fc_tx_pause,
+	e1000_fc_full,
+	e1000_fc_default = 0xFF
+};
+
+/* Statistics counters collected by the MAC */
+struct e1000_hw_stats {
+	u64 crcerrs;
+	u64 algnerrc;
+	u64 symerrs;
+	u64 rxerrc;
+	u64 mpc;
+	u64 scc;
+	u64 ecol;
+	u64 mcc;
+	u64 latecol;
+	u64 colc;
+	u64 dc;
+	u64 tncrs;
+	u64 sec;
+	u64 cexterr;
+	u64 rlec;
+	u64 xonrxc;
+	u64 xontxc;
+	u64 xoffrxc;
+	u64 xofftxc;
+	u64 fcruc;
+	u64 prc64;
+	u64 prc127;
+	u64 prc255;
+	u64 prc511;
+	u64 prc1023;
+	u64 prc1522;
+	u64 gprc;
+	u64 bprc;
+	u64 mprc;
+	u64 gptc;
+	u64 gorc;
+	u64 gotc;
+	u64 rnbc;
+	u64 ruc;
+	u64 rfc;
+	u64 roc;
+	u64 rjc;
+	u64 mgprc;
+	u64 mgpdc;
+	u64 mgptc;
+	u64 tor;
+	u64 tot;
+	u64 tpr;
+	u64 tpt;
+	u64 ptc64;
+	u64 ptc127;
+	u64 ptc255;
+	u64 ptc511;
+	u64 ptc1023;
+	u64 ptc1522;
+	u64 mptc;
+	u64 bptc;
+	u64 tsctc;
+	u64 tsctfc;
+	u64 iac;
+	u64 icrxptc;
+	u64 icrxatc;
+	u64 ictxptc;
+	u64 ictxatc;
+	u64 ictxqec;
+	u64 ictxqmtc;
+	u64 icrxdmtc;
+	u64 icrxoc;
+	u64 cbtmpc;
+	u64 htdpmc;
+	u64 cbrdpc;
+	u64 cbrmpc;
+	u64 rpthc;
+	u64 hgptc;
+	u64 htcbdpc;
+	u64 hgorc;
+	u64 hgotc;
+	u64 lenerrs;
+	u64 scvpc;
+	u64 hrmpc;
+	u64 doosync;
+	u64 o2bgptc;
+	u64 o2bspc;
+	u64 b2ospc;
+	u64 b2ogprc;
+};
+
+struct e1000_phy_stats {
+	u32 idle_errors;
+	u32 receive_errors;
+};
+
+struct e1000_host_mng_dhcp_cookie {
+	u32 signature;
+	u8  status;
+	u8  reserved0;
+	u16 vlan_id;
+	u32 reserved1;
+	u16 reserved2;
+	u8  reserved3;
+	u8  checksum;
+};
+
+/* Host Interface "Rev 1" */
+struct e1000_host_command_header {
+	u8 command_id;
+	u8 command_length;
+	u8 command_options;
+	u8 checksum;
+};
+
+#define E1000_HI_MAX_DATA_LENGTH     252
+struct e1000_host_command_info {
+	struct e1000_host_command_header command_header;
+	u8 command_data[E1000_HI_MAX_DATA_LENGTH];
+};
+
+/* Host Interface "Rev 2" */
+struct e1000_host_mng_command_header {
+	u8  command_id;
+	u8  checksum;
+	u16 reserved1;
+	u16 reserved2;
+	u16 command_length;
+};
+
+#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8
+struct e1000_host_mng_command_info {
+	struct e1000_host_mng_command_header command_header;
+	u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH];
+};
+
+#include "e1000_mac.h"
+#include "e1000_phy.h"
+#include "e1000_nvm.h"
+#include "e1000_mbx.h"
+
+struct e1000_mac_operations {
+	s32  (*check_for_link)(struct e1000_hw *);
+	s32  (*reset_hw)(struct e1000_hw *);
+	s32  (*init_hw)(struct e1000_hw *);
+	bool (*check_mng_mode)(struct e1000_hw *);
+	s32  (*setup_physical_interface)(struct e1000_hw *);
+	void (*rar_set)(struct e1000_hw *, u8 *, u32);
+	s32  (*read_mac_addr)(struct e1000_hw *);
+	s32  (*get_speed_and_duplex)(struct e1000_hw *, u16 *, u16 *);
+};
+
+struct e1000_phy_operations {
+	s32  (*acquire)(struct e1000_hw *);
+	s32  (*check_polarity)(struct e1000_hw *);
+	s32  (*check_reset_block)(struct e1000_hw *);
+	s32  (*force_speed_duplex)(struct e1000_hw *);
+	s32  (*get_cfg_done)(struct e1000_hw *hw);
+	s32  (*get_cable_length)(struct e1000_hw *);
+	s32  (*get_phy_info)(struct e1000_hw *);
+	s32  (*read_reg)(struct e1000_hw *, u32, u16 *);
+	void (*release)(struct e1000_hw *);
+	s32  (*reset)(struct e1000_hw *);
+	s32  (*set_d0_lplu_state)(struct e1000_hw *, bool);
+	s32  (*set_d3_lplu_state)(struct e1000_hw *, bool);
+	s32  (*write_reg)(struct e1000_hw *, u32, u16);
+};
+
+struct e1000_nvm_operations {
+	s32  (*acquire)(struct e1000_hw *);
+	s32  (*read)(struct e1000_hw *, u16, u16, u16 *);
+	void (*release)(struct e1000_hw *);
+	s32  (*write)(struct e1000_hw *, u16, u16, u16 *);
+	s32  (*update)(struct e1000_hw *);
+	s32  (*validate)(struct e1000_hw *);
+};
+
+struct e1000_info {
+	s32 (*get_invariants)(struct e1000_hw *);
+	struct e1000_mac_operations *mac_ops;
+	struct e1000_phy_operations *phy_ops;
+	struct e1000_nvm_operations *nvm_ops;
+};
+
+extern const struct e1000_info e1000_82575_info;
+
+struct e1000_mac_info {
+	struct e1000_mac_operations ops;
+
+	u8 addr[6];
+	u8 perm_addr[6];
+
+	enum e1000_mac_type type;
+
+	u32 ledctl_default;
+	u32 ledctl_mode1;
+	u32 ledctl_mode2;
+	u32 mc_filter_type;
+	u32 txcw;
+
+	u16 mta_reg_count;
+	u16 uta_reg_count;
+
+	/* Maximum size of the MTA register table in all supported adapters */
+	#define MAX_MTA_REG 128
+	u32 mta_shadow[MAX_MTA_REG];
+	u16 rar_entry_count;
+
+	u8  forced_speed_duplex;
+
+	bool adaptive_ifs;
+	bool arc_subsystem_valid;
+	bool asf_firmware_present;
+	bool autoneg;
+	bool autoneg_failed;
+	bool disable_hw_init_bits;
+	bool get_link_status;
+	bool ifs_params_forced;
+	bool in_ifs_mode;
+	bool report_tx_early;
+	bool serdes_has_link;
+	bool tx_pkt_filtering;
+};
+
+struct e1000_phy_info {
+	struct e1000_phy_operations ops;
+
+	enum e1000_phy_type type;
+
+	enum e1000_1000t_rx_status local_rx;
+	enum e1000_1000t_rx_status remote_rx;
+	enum e1000_ms_type ms_type;
+	enum e1000_ms_type original_ms_type;
+	enum e1000_rev_polarity cable_polarity;
+	enum e1000_smart_speed smart_speed;
+
+	u32 addr;
+	u32 id;
+	u32 reset_delay_us; /* in usec */
+	u32 revision;
+
+	enum e1000_media_type media_type;
+
+	u16 autoneg_advertised;
+	u16 autoneg_mask;
+	u16 cable_length;
+	u16 max_cable_length;
+	u16 min_cable_length;
+
+	u8 mdix;
+
+	bool disable_polarity_correction;
+	bool is_mdix;
+	bool polarity_correction;
+	bool reset_disable;
+	bool speed_downgraded;
+	bool autoneg_wait_to_complete;
+};
+
+struct e1000_nvm_info {
+	struct e1000_nvm_operations ops;
+	enum e1000_nvm_type type;
+	enum e1000_nvm_override override;
+
+	u32 flash_bank_size;
+	u32 flash_base_addr;
+
+	u16 word_size;
+	u16 delay_usec;
+	u16 address_bits;
+	u16 opcode_bits;
+	u16 page_size;
+};
+
+struct e1000_bus_info {
+	enum e1000_bus_type type;
+	enum e1000_bus_speed speed;
+	enum e1000_bus_width width;
+
+	u32 snoop;
+
+	u16 func;
+	u16 pci_cmd_word;
+};
+
+struct e1000_fc_info {
+	u32 high_water;     /* Flow control high-water mark */
+	u32 low_water;      /* Flow control low-water mark */
+	u16 pause_time;     /* Flow control pause timer */
+	bool send_xon;      /* Flow control send XON */
+	bool strict_ieee;   /* Strict IEEE mode */
+	enum e1000_fc_mode current_mode; /* Type of flow control */
+	enum e1000_fc_mode requested_mode;
+};
+
+struct e1000_mbx_operations {
+	s32 (*init_params)(struct e1000_hw *hw);
+	s32 (*read)(struct e1000_hw *, u32 *, u16,  u16);
+	s32 (*write)(struct e1000_hw *, u32 *, u16, u16);
+	s32 (*read_posted)(struct e1000_hw *, u32 *, u16,  u16);
+	s32 (*write_posted)(struct e1000_hw *, u32 *, u16, u16);
+	s32 (*check_for_msg)(struct e1000_hw *, u16);
+	s32 (*check_for_ack)(struct e1000_hw *, u16);
+	s32 (*check_for_rst)(struct e1000_hw *, u16);
+};
+
+struct e1000_mbx_stats {
+	u32 msgs_tx;
+	u32 msgs_rx;
+
+	u32 acks;
+	u32 reqs;
+	u32 rsts;
+};
+
+struct e1000_mbx_info {
+	struct e1000_mbx_operations ops;
+	struct e1000_mbx_stats stats;
+	u32 timeout;
+	u32 usec_delay;
+	u16 size;
+};
+
+struct e1000_dev_spec_82575 {
+	bool sgmii_active;
+	bool global_device_reset;
+	bool eee_disable;
+};
+
+struct e1000_hw {
+	void *back;
+
+	u8 __iomem *hw_addr;
+	u8 __iomem *flash_address;
+	unsigned long io_base;
+
+	struct e1000_mac_info  mac;
+	struct e1000_fc_info   fc;
+	struct e1000_phy_info  phy;
+	struct e1000_nvm_info  nvm;
+	struct e1000_bus_info  bus;
+	struct e1000_mbx_info mbx;
+	struct e1000_host_mng_dhcp_cookie mng_cookie;
+
+	union {
+		struct e1000_dev_spec_82575	_82575;
+	} dev_spec;
+
+	u16 device_id;
+	u16 subsystem_vendor_id;
+	u16 subsystem_device_id;
+	u16 vendor_id;
+
+	u8  revision_id;
+};
+
+extern struct net_device *igb_get_hw_dev(struct e1000_hw *hw);
+#define hw_dbg(format, arg...) \
+	netdev_dbg(igb_get_hw_dev(hw), format, ##arg)
+
+/* These functions must be implemented by drivers */
+s32  igb_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value);
+s32  igb_write_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value);
+#endif /* _E1000_HW_H_ */
diff --git a/drivers/net/ethernet/intel/igb/e1000_mac.c b/drivers/net/ethernet/intel/igb/e1000_mac.c
new file mode 100644
index 00000000000..73aac082c44
--- /dev/null
+++ b/drivers/net/ethernet/intel/igb/e1000_mac.c
@@ -0,0 +1,1483 @@
+/*******************************************************************************
+
+  Intel(R) Gigabit Ethernet Linux driver
+  Copyright(c) 2007-2011 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/if_ether.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+
+#include "e1000_mac.h"
+
+#include "igb.h"
+
+static s32 igb_set_default_fc(struct e1000_hw *hw);
+static s32 igb_set_fc_watermarks(struct e1000_hw *hw);
+
+/**
+ *  igb_get_bus_info_pcie - Get PCIe bus information
+ *  @hw: pointer to the HW structure
+ *
+ *  Determines and stores the system bus information for a particular
+ *  network interface.  The following bus information is determined and stored:
+ *  bus speed, bus width, type (PCIe), and PCIe function.
+ **/
+s32 igb_get_bus_info_pcie(struct e1000_hw *hw)
+{
+	struct e1000_bus_info *bus = &hw->bus;
+	s32 ret_val;
+	u32 reg;
+	u16 pcie_link_status;
+
+	bus->type = e1000_bus_type_pci_express;
+
+	ret_val = igb_read_pcie_cap_reg(hw,
+					PCI_EXP_LNKSTA,
+					&pcie_link_status);
+	if (ret_val) {
+		bus->width = e1000_bus_width_unknown;
+		bus->speed = e1000_bus_speed_unknown;
+	} else {
+		switch (pcie_link_status & PCI_EXP_LNKSTA_CLS) {
+		case PCI_EXP_LNKSTA_CLS_2_5GB:
+			bus->speed = e1000_bus_speed_2500;
+			break;
+		case PCI_EXP_LNKSTA_CLS_5_0GB:
+			bus->speed = e1000_bus_speed_5000;
+			break;
+		default:
+			bus->speed = e1000_bus_speed_unknown;
+			break;
+		}
+
+		bus->width = (enum e1000_bus_width)((pcie_link_status &
+						     PCI_EXP_LNKSTA_NLW) >>
+						     PCI_EXP_LNKSTA_NLW_SHIFT);
+	}
+
+	reg = rd32(E1000_STATUS);
+	bus->func = (reg & E1000_STATUS_FUNC_MASK) >> E1000_STATUS_FUNC_SHIFT;
+
+	return 0;
+}
+
+/**
+ *  igb_clear_vfta - Clear VLAN filter table
+ *  @hw: pointer to the HW structure
+ *
+ *  Clears the register array which contains the VLAN filter table by
+ *  setting all the values to 0.
+ **/
+void igb_clear_vfta(struct e1000_hw *hw)
+{
+	u32 offset;
+
+	for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
+		array_wr32(E1000_VFTA, offset, 0);
+		wrfl();
+	}
+}
+
+/**
+ *  igb_write_vfta - Write value to VLAN filter table
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset in VLAN filter table
+ *  @value: register value written to VLAN filter table
+ *
+ *  Writes value at the given offset in the register array which stores
+ *  the VLAN filter table.
+ **/
+static void igb_write_vfta(struct e1000_hw *hw, u32 offset, u32 value)
+{
+	array_wr32(E1000_VFTA, offset, value);
+	wrfl();
+}
+
+/* Due to a hw errata, if the host tries to  configure the VFTA register
+ * while performing queries from the BMC or DMA, then the VFTA in some
+ * cases won't be written.
+ */
+
+/**
+ *  igb_clear_vfta_i350 - Clear VLAN filter table
+ *  @hw: pointer to the HW structure
+ *
+ *  Clears the register array which contains the VLAN filter table by
+ *  setting all the values to 0.
+ **/
+void igb_clear_vfta_i350(struct e1000_hw *hw)
+{
+	u32 offset;
+	int i;
+
+	for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
+		for (i = 0; i < 10; i++)
+			array_wr32(E1000_VFTA, offset, 0);
+
+		wrfl();
+	}
+}
+
+/**
+ *  igb_write_vfta_i350 - Write value to VLAN filter table
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset in VLAN filter table
+ *  @value: register value written to VLAN filter table
+ *
+ *  Writes value at the given offset in the register array which stores
+ *  the VLAN filter table.
+ **/
+void igb_write_vfta_i350(struct e1000_hw *hw, u32 offset, u32 value)
+{
+	int i;
+
+	for (i = 0; i < 10; i++)
+		array_wr32(E1000_VFTA, offset, value);
+
+	wrfl();
+}
+
+/**
+ *  igb_init_rx_addrs - Initialize receive address's
+ *  @hw: pointer to the HW structure
+ *  @rar_count: receive address registers
+ *
+ *  Setups the receive address registers by setting the base receive address
+ *  register to the devices MAC address and clearing all the other receive
+ *  address registers to 0.
+ **/
+void igb_init_rx_addrs(struct e1000_hw *hw, u16 rar_count)
+{
+	u32 i;
+	u8 mac_addr[ETH_ALEN] = {0};
+
+	/* Setup the receive address */
+	hw_dbg("Programming MAC Address into RAR[0]\n");
+
+	hw->mac.ops.rar_set(hw, hw->mac.addr, 0);
+
+	/* Zero out the other (rar_entry_count - 1) receive addresses */
+	hw_dbg("Clearing RAR[1-%u]\n", rar_count-1);
+	for (i = 1; i < rar_count; i++)
+		hw->mac.ops.rar_set(hw, mac_addr, i);
+}
+
+/**
+ *  igb_vfta_set - enable or disable vlan in VLAN filter table
+ *  @hw: pointer to the HW structure
+ *  @vid: VLAN id to add or remove
+ *  @add: if true add filter, if false remove
+ *
+ *  Sets or clears a bit in the VLAN filter table array based on VLAN id
+ *  and if we are adding or removing the filter
+ **/
+s32 igb_vfta_set(struct e1000_hw *hw, u32 vid, bool add)
+{
+	u32 index = (vid >> E1000_VFTA_ENTRY_SHIFT) & E1000_VFTA_ENTRY_MASK;
+	u32 mask = 1 << (vid & E1000_VFTA_ENTRY_BIT_SHIFT_MASK);
+	u32 vfta;
+	struct igb_adapter *adapter = hw->back;
+	s32 ret_val = 0;
+
+	vfta = adapter->shadow_vfta[index];
+
+	/* bit was set/cleared before we started */
+	if ((!!(vfta & mask)) == add) {
+		ret_val = -E1000_ERR_CONFIG;
+	} else {
+		if (add)
+			vfta |= mask;
+		else
+			vfta &= ~mask;
+	}
+	if (hw->mac.type == e1000_i350)
+		igb_write_vfta_i350(hw, index, vfta);
+	else
+		igb_write_vfta(hw, index, vfta);
+	adapter->shadow_vfta[index] = vfta;
+
+	return ret_val;
+}
+
+/**
+ *  igb_check_alt_mac_addr - Check for alternate MAC addr
+ *  @hw: pointer to the HW structure
+ *
+ *  Checks the nvm for an alternate MAC address.  An alternate MAC address
+ *  can be setup by pre-boot software and must be treated like a permanent
+ *  address and must override the actual permanent MAC address.  If an
+ *  alternate MAC address is fopund it is saved in the hw struct and
+ *  prgrammed into RAR0 and the cuntion returns success, otherwise the
+ *  function returns an error.
+ **/
+s32 igb_check_alt_mac_addr(struct e1000_hw *hw)
+{
+	u32 i;
+	s32 ret_val = 0;
+	u16 offset, nvm_alt_mac_addr_offset, nvm_data;
+	u8 alt_mac_addr[ETH_ALEN];
+
+	/*
+	 * Alternate MAC address is handled by the option ROM for 82580
+	 * and newer. SW support not required.
+	 */
+	if (hw->mac.type >= e1000_82580)
+		goto out;
+
+	ret_val = hw->nvm.ops.read(hw, NVM_ALT_MAC_ADDR_PTR, 1,
+				 &nvm_alt_mac_addr_offset);
+	if (ret_val) {
+		hw_dbg("NVM Read Error\n");
+		goto out;
+	}
+
+	if ((nvm_alt_mac_addr_offset == 0xFFFF) ||
+	    (nvm_alt_mac_addr_offset == 0x0000))
+		/* There is no Alternate MAC Address */
+		goto out;
+
+	if (hw->bus.func == E1000_FUNC_1)
+		nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN1;
+	if (hw->bus.func == E1000_FUNC_2)
+		nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN2;
+
+	if (hw->bus.func == E1000_FUNC_3)
+		nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN3;
+	for (i = 0; i < ETH_ALEN; i += 2) {
+		offset = nvm_alt_mac_addr_offset + (i >> 1);
+		ret_val = hw->nvm.ops.read(hw, offset, 1, &nvm_data);
+		if (ret_val) {
+			hw_dbg("NVM Read Error\n");
+			goto out;
+		}
+
+		alt_mac_addr[i] = (u8)(nvm_data & 0xFF);
+		alt_mac_addr[i + 1] = (u8)(nvm_data >> 8);
+	}
+
+	/* if multicast bit is set, the alternate address will not be used */
+	if (is_multicast_ether_addr(alt_mac_addr)) {
+		hw_dbg("Ignoring Alternate Mac Address with MC bit set\n");
+		goto out;
+	}
+
+	/*
+	 * We have a valid alternate MAC address, and we want to treat it the
+	 * same as the normal permanent MAC address stored by the HW into the
+	 * RAR. Do this by mapping this address into RAR0.
+	 */
+	hw->mac.ops.rar_set(hw, alt_mac_addr, 0);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_rar_set - Set receive address register
+ *  @hw: pointer to the HW structure
+ *  @addr: pointer to the receive address
+ *  @index: receive address array register
+ *
+ *  Sets the receive address array register at index to the address passed
+ *  in by addr.
+ **/
+void igb_rar_set(struct e1000_hw *hw, u8 *addr, u32 index)
+{
+	u32 rar_low, rar_high;
+
+	/*
+	 * HW expects these in little endian so we reverse the byte order
+	 * from network order (big endian) to little endian
+	 */
+	rar_low = ((u32) addr[0] |
+		   ((u32) addr[1] << 8) |
+		    ((u32) addr[2] << 16) | ((u32) addr[3] << 24));
+
+	rar_high = ((u32) addr[4] | ((u32) addr[5] << 8));
+
+	/* If MAC address zero, no need to set the AV bit */
+	if (rar_low || rar_high)
+		rar_high |= E1000_RAH_AV;
+
+	/*
+	 * Some bridges will combine consecutive 32-bit writes into
+	 * a single burst write, which will malfunction on some parts.
+	 * The flushes avoid this.
+	 */
+	wr32(E1000_RAL(index), rar_low);
+	wrfl();
+	wr32(E1000_RAH(index), rar_high);
+	wrfl();
+}
+
+/**
+ *  igb_mta_set - Set multicast filter table address
+ *  @hw: pointer to the HW structure
+ *  @hash_value: determines the MTA register and bit to set
+ *
+ *  The multicast table address is a register array of 32-bit registers.
+ *  The hash_value is used to determine what register the bit is in, the
+ *  current value is read, the new bit is OR'd in and the new value is
+ *  written back into the register.
+ **/
+void igb_mta_set(struct e1000_hw *hw, u32 hash_value)
+{
+	u32 hash_bit, hash_reg, mta;
+
+	/*
+	 * The MTA is a register array of 32-bit registers. It is
+	 * treated like an array of (32*mta_reg_count) bits.  We want to
+	 * set bit BitArray[hash_value]. So we figure out what register
+	 * the bit is in, read it, OR in the new bit, then write
+	 * back the new value.  The (hw->mac.mta_reg_count - 1) serves as a
+	 * mask to bits 31:5 of the hash value which gives us the
+	 * register we're modifying.  The hash bit within that register
+	 * is determined by the lower 5 bits of the hash value.
+	 */
+	hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1);
+	hash_bit = hash_value & 0x1F;
+
+	mta = array_rd32(E1000_MTA, hash_reg);
+
+	mta |= (1 << hash_bit);
+
+	array_wr32(E1000_MTA, hash_reg, mta);
+	wrfl();
+}
+
+/**
+ *  igb_hash_mc_addr - Generate a multicast hash value
+ *  @hw: pointer to the HW structure
+ *  @mc_addr: pointer to a multicast address
+ *
+ *  Generates a multicast address hash value which is used to determine
+ *  the multicast filter table array address and new table value.  See
+ *  igb_mta_set()
+ **/
+static u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
+{
+	u32 hash_value, hash_mask;
+	u8 bit_shift = 0;
+
+	/* Register count multiplied by bits per register */
+	hash_mask = (hw->mac.mta_reg_count * 32) - 1;
+
+	/*
+	 * For a mc_filter_type of 0, bit_shift is the number of left-shifts
+	 * where 0xFF would still fall within the hash mask.
+	 */
+	while (hash_mask >> bit_shift != 0xFF)
+		bit_shift++;
+
+	/*
+	 * The portion of the address that is used for the hash table
+	 * is determined by the mc_filter_type setting.
+	 * The algorithm is such that there is a total of 8 bits of shifting.
+	 * The bit_shift for a mc_filter_type of 0 represents the number of
+	 * left-shifts where the MSB of mc_addr[5] would still fall within
+	 * the hash_mask.  Case 0 does this exactly.  Since there are a total
+	 * of 8 bits of shifting, then mc_addr[4] will shift right the
+	 * remaining number of bits. Thus 8 - bit_shift.  The rest of the
+	 * cases are a variation of this algorithm...essentially raising the
+	 * number of bits to shift mc_addr[5] left, while still keeping the
+	 * 8-bit shifting total.
+	 *
+	 * For example, given the following Destination MAC Address and an
+	 * mta register count of 128 (thus a 4096-bit vector and 0xFFF mask),
+	 * we can see that the bit_shift for case 0 is 4.  These are the hash
+	 * values resulting from each mc_filter_type...
+	 * [0] [1] [2] [3] [4] [5]
+	 * 01  AA  00  12  34  56
+	 * LSB                 MSB
+	 *
+	 * case 0: hash_value = ((0x34 >> 4) | (0x56 << 4)) & 0xFFF = 0x563
+	 * case 1: hash_value = ((0x34 >> 3) | (0x56 << 5)) & 0xFFF = 0xAC6
+	 * case 2: hash_value = ((0x34 >> 2) | (0x56 << 6)) & 0xFFF = 0x163
+	 * case 3: hash_value = ((0x34 >> 0) | (0x56 << 8)) & 0xFFF = 0x634
+	 */
+	switch (hw->mac.mc_filter_type) {
+	default:
+	case 0:
+		break;
+	case 1:
+		bit_shift += 1;
+		break;
+	case 2:
+		bit_shift += 2;
+		break;
+	case 3:
+		bit_shift += 4;
+		break;
+	}
+
+	hash_value = hash_mask & (((mc_addr[4] >> (8 - bit_shift)) |
+				  (((u16) mc_addr[5]) << bit_shift)));
+
+	return hash_value;
+}
+
+/**
+ *  igb_update_mc_addr_list - Update Multicast addresses
+ *  @hw: pointer to the HW structure
+ *  @mc_addr_list: array of multicast addresses to program
+ *  @mc_addr_count: number of multicast addresses to program
+ *
+ *  Updates entire Multicast Table Array.
+ *  The caller must have a packed mc_addr_list of multicast addresses.
+ **/
+void igb_update_mc_addr_list(struct e1000_hw *hw,
+                             u8 *mc_addr_list, u32 mc_addr_count)
+{
+	u32 hash_value, hash_bit, hash_reg;
+	int i;
+
+	/* clear mta_shadow */
+	memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow));
+
+	/* update mta_shadow from mc_addr_list */
+	for (i = 0; (u32) i < mc_addr_count; i++) {
+		hash_value = igb_hash_mc_addr(hw, mc_addr_list);
+
+		hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1);
+		hash_bit = hash_value & 0x1F;
+
+		hw->mac.mta_shadow[hash_reg] |= (1 << hash_bit);
+		mc_addr_list += (ETH_ALEN);
+	}
+
+	/* replace the entire MTA table */
+	for (i = hw->mac.mta_reg_count - 1; i >= 0; i--)
+		array_wr32(E1000_MTA, i, hw->mac.mta_shadow[i]);
+	wrfl();
+}
+
+/**
+ *  igb_clear_hw_cntrs_base - Clear base hardware counters
+ *  @hw: pointer to the HW structure
+ *
+ *  Clears the base hardware counters by reading the counter registers.
+ **/
+void igb_clear_hw_cntrs_base(struct e1000_hw *hw)
+{
+	rd32(E1000_CRCERRS);
+	rd32(E1000_SYMERRS);
+	rd32(E1000_MPC);
+	rd32(E1000_SCC);
+	rd32(E1000_ECOL);
+	rd32(E1000_MCC);
+	rd32(E1000_LATECOL);
+	rd32(E1000_COLC);
+	rd32(E1000_DC);
+	rd32(E1000_SEC);
+	rd32(E1000_RLEC);
+	rd32(E1000_XONRXC);
+	rd32(E1000_XONTXC);
+	rd32(E1000_XOFFRXC);
+	rd32(E1000_XOFFTXC);
+	rd32(E1000_FCRUC);
+	rd32(E1000_GPRC);
+	rd32(E1000_BPRC);
+	rd32(E1000_MPRC);
+	rd32(E1000_GPTC);
+	rd32(E1000_GORCL);
+	rd32(E1000_GORCH);
+	rd32(E1000_GOTCL);
+	rd32(E1000_GOTCH);
+	rd32(E1000_RNBC);
+	rd32(E1000_RUC);
+	rd32(E1000_RFC);
+	rd32(E1000_ROC);
+	rd32(E1000_RJC);
+	rd32(E1000_TORL);
+	rd32(E1000_TORH);
+	rd32(E1000_TOTL);
+	rd32(E1000_TOTH);
+	rd32(E1000_TPR);
+	rd32(E1000_TPT);
+	rd32(E1000_MPTC);
+	rd32(E1000_BPTC);
+}
+
+/**
+ *  igb_check_for_copper_link - Check for link (Copper)
+ *  @hw: pointer to the HW structure
+ *
+ *  Checks to see of the link status of the hardware has changed.  If a
+ *  change in link status has been detected, then we read the PHY registers
+ *  to get the current speed/duplex if link exists.
+ **/
+s32 igb_check_for_copper_link(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	s32 ret_val;
+	bool link;
+
+	/*
+	 * We only want to go out to the PHY registers to see if Auto-Neg
+	 * has completed and/or if our link status has changed.  The
+	 * get_link_status flag is set upon receiving a Link Status
+	 * Change or Rx Sequence Error interrupt.
+	 */
+	if (!mac->get_link_status) {
+		ret_val = 0;
+		goto out;
+	}
+
+	/*
+	 * First we want to see if the MII Status Register reports
+	 * link.  If so, then we want to get the current speed/duplex
+	 * of the PHY.
+	 */
+	ret_val = igb_phy_has_link(hw, 1, 0, &link);
+	if (ret_val)
+		goto out;
+
+	if (!link)
+		goto out; /* No link detected */
+
+	mac->get_link_status = false;
+
+	/*
+	 * Check if there was DownShift, must be checked
+	 * immediately after link-up
+	 */
+	igb_check_downshift(hw);
+
+	/*
+	 * If we are forcing speed/duplex, then we simply return since
+	 * we have already determined whether we have link or not.
+	 */
+	if (!mac->autoneg) {
+		ret_val = -E1000_ERR_CONFIG;
+		goto out;
+	}
+
+	/*
+	 * Auto-Neg is enabled.  Auto Speed Detection takes care
+	 * of MAC speed/duplex configuration.  So we only need to
+	 * configure Collision Distance in the MAC.
+	 */
+	igb_config_collision_dist(hw);
+
+	/*
+	 * Configure Flow Control now that Auto-Neg has completed.
+	 * First, we need to restore the desired flow control
+	 * settings because we may have had to re-autoneg with a
+	 * different link partner.
+	 */
+	ret_val = igb_config_fc_after_link_up(hw);
+	if (ret_val)
+		hw_dbg("Error configuring flow control\n");
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_setup_link - Setup flow control and link settings
+ *  @hw: pointer to the HW structure
+ *
+ *  Determines which flow control settings to use, then configures flow
+ *  control.  Calls the appropriate media-specific link configuration
+ *  function.  Assuming the adapter has a valid link partner, a valid link
+ *  should be established.  Assumes the hardware has previously been reset
+ *  and the transmitter and receiver are not enabled.
+ **/
+s32 igb_setup_link(struct e1000_hw *hw)
+{
+	s32 ret_val = 0;
+
+	/*
+	 * In the case of the phy reset being blocked, we already have a link.
+	 * We do not need to set it up again.
+	 */
+	if (igb_check_reset_block(hw))
+		goto out;
+
+	/*
+	 * If requested flow control is set to default, set flow control
+	 * based on the EEPROM flow control settings.
+	 */
+	if (hw->fc.requested_mode == e1000_fc_default) {
+		ret_val = igb_set_default_fc(hw);
+		if (ret_val)
+			goto out;
+	}
+
+	/*
+	 * We want to save off the original Flow Control configuration just
+	 * in case we get disconnected and then reconnected into a different
+	 * hub or switch with different Flow Control capabilities.
+	 */
+	hw->fc.current_mode = hw->fc.requested_mode;
+
+	hw_dbg("After fix-ups FlowControl is now = %x\n", hw->fc.current_mode);
+
+	/* Call the necessary media_type subroutine to configure the link. */
+	ret_val = hw->mac.ops.setup_physical_interface(hw);
+	if (ret_val)
+		goto out;
+
+	/*
+	 * Initialize the flow control address, type, and PAUSE timer
+	 * registers to their default values.  This is done even if flow
+	 * control is disabled, because it does not hurt anything to
+	 * initialize these registers.
+	 */
+	hw_dbg("Initializing the Flow Control address, type and timer regs\n");
+	wr32(E1000_FCT, FLOW_CONTROL_TYPE);
+	wr32(E1000_FCAH, FLOW_CONTROL_ADDRESS_HIGH);
+	wr32(E1000_FCAL, FLOW_CONTROL_ADDRESS_LOW);
+
+	wr32(E1000_FCTTV, hw->fc.pause_time);
+
+	ret_val = igb_set_fc_watermarks(hw);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_config_collision_dist - Configure collision distance
+ *  @hw: pointer to the HW structure
+ *
+ *  Configures the collision distance to the default value and is used
+ *  during link setup. Currently no func pointer exists and all
+ *  implementations are handled in the generic version of this function.
+ **/
+void igb_config_collision_dist(struct e1000_hw *hw)
+{
+	u32 tctl;
+
+	tctl = rd32(E1000_TCTL);
+
+	tctl &= ~E1000_TCTL_COLD;
+	tctl |= E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT;
+
+	wr32(E1000_TCTL, tctl);
+	wrfl();
+}
+
+/**
+ *  igb_set_fc_watermarks - Set flow control high/low watermarks
+ *  @hw: pointer to the HW structure
+ *
+ *  Sets the flow control high/low threshold (watermark) registers.  If
+ *  flow control XON frame transmission is enabled, then set XON frame
+ *  tansmission as well.
+ **/
+static s32 igb_set_fc_watermarks(struct e1000_hw *hw)
+{
+	s32 ret_val = 0;
+	u32 fcrtl = 0, fcrth = 0;
+
+	/*
+	 * Set the flow control receive threshold registers.  Normally,
+	 * these registers will be set to a default threshold that may be
+	 * adjusted later by the driver's runtime code.  However, if the
+	 * ability to transmit pause frames is not enabled, then these
+	 * registers will be set to 0.
+	 */
+	if (hw->fc.current_mode & e1000_fc_tx_pause) {
+		/*
+		 * We need to set up the Receive Threshold high and low water
+		 * marks as well as (optionally) enabling the transmission of
+		 * XON frames.
+		 */
+		fcrtl = hw->fc.low_water;
+		if (hw->fc.send_xon)
+			fcrtl |= E1000_FCRTL_XONE;
+
+		fcrth = hw->fc.high_water;
+	}
+	wr32(E1000_FCRTL, fcrtl);
+	wr32(E1000_FCRTH, fcrth);
+
+	return ret_val;
+}
+
+/**
+ *  igb_set_default_fc - Set flow control default values
+ *  @hw: pointer to the HW structure
+ *
+ *  Read the EEPROM for the default values for flow control and store the
+ *  values.
+ **/
+static s32 igb_set_default_fc(struct e1000_hw *hw)
+{
+	s32 ret_val = 0;
+	u16 nvm_data;
+
+	/*
+	 * Read and store word 0x0F of the EEPROM. This word contains bits
+	 * that determine the hardware's default PAUSE (flow control) mode,
+	 * a bit that determines whether the HW defaults to enabling or
+	 * disabling auto-negotiation, and the direction of the
+	 * SW defined pins. If there is no SW over-ride of the flow
+	 * control setting, then the variable hw->fc will
+	 * be initialized based on a value in the EEPROM.
+	 */
+	ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL2_REG, 1, &nvm_data);
+
+	if (ret_val) {
+		hw_dbg("NVM Read Error\n");
+		goto out;
+	}
+
+	if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == 0)
+		hw->fc.requested_mode = e1000_fc_none;
+	else if ((nvm_data & NVM_WORD0F_PAUSE_MASK) ==
+		 NVM_WORD0F_ASM_DIR)
+		hw->fc.requested_mode = e1000_fc_tx_pause;
+	else
+		hw->fc.requested_mode = e1000_fc_full;
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_force_mac_fc - Force the MAC's flow control settings
+ *  @hw: pointer to the HW structure
+ *
+ *  Force the MAC's flow control settings.  Sets the TFCE and RFCE bits in the
+ *  device control register to reflect the adapter settings.  TFCE and RFCE
+ *  need to be explicitly set by software when a copper PHY is used because
+ *  autonegotiation is managed by the PHY rather than the MAC.  Software must
+ *  also configure these bits when link is forced on a fiber connection.
+ **/
+s32 igb_force_mac_fc(struct e1000_hw *hw)
+{
+	u32 ctrl;
+	s32 ret_val = 0;
+
+	ctrl = rd32(E1000_CTRL);
+
+	/*
+	 * Because we didn't get link via the internal auto-negotiation
+	 * mechanism (we either forced link or we got link via PHY
+	 * auto-neg), we have to manually enable/disable transmit an
+	 * receive flow control.
+	 *
+	 * The "Case" statement below enables/disable flow control
+	 * according to the "hw->fc.current_mode" parameter.
+	 *
+	 * The possible values of the "fc" parameter are:
+	 *      0:  Flow control is completely disabled
+	 *      1:  Rx flow control is enabled (we can receive pause
+	 *          frames but not send pause frames).
+	 *      2:  Tx flow control is enabled (we can send pause frames
+	 *          frames but we do not receive pause frames).
+	 *      3:  Both Rx and TX flow control (symmetric) is enabled.
+	 *  other:  No other values should be possible at this point.
+	 */
+	hw_dbg("hw->fc.current_mode = %u\n", hw->fc.current_mode);
+
+	switch (hw->fc.current_mode) {
+	case e1000_fc_none:
+		ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE));
+		break;
+	case e1000_fc_rx_pause:
+		ctrl &= (~E1000_CTRL_TFCE);
+		ctrl |= E1000_CTRL_RFCE;
+		break;
+	case e1000_fc_tx_pause:
+		ctrl &= (~E1000_CTRL_RFCE);
+		ctrl |= E1000_CTRL_TFCE;
+		break;
+	case e1000_fc_full:
+		ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE);
+		break;
+	default:
+		hw_dbg("Flow control param set incorrectly\n");
+		ret_val = -E1000_ERR_CONFIG;
+		goto out;
+	}
+
+	wr32(E1000_CTRL, ctrl);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_config_fc_after_link_up - Configures flow control after link
+ *  @hw: pointer to the HW structure
+ *
+ *  Checks the status of auto-negotiation after link up to ensure that the
+ *  speed and duplex were not forced.  If the link needed to be forced, then
+ *  flow control needs to be forced also.  If auto-negotiation is enabled
+ *  and did not fail, then we configure flow control based on our link
+ *  partner.
+ **/
+s32 igb_config_fc_after_link_up(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	s32 ret_val = 0;
+	u16 mii_status_reg, mii_nway_adv_reg, mii_nway_lp_ability_reg;
+	u16 speed, duplex;
+
+	/*
+	 * Check for the case where we have fiber media and auto-neg failed
+	 * so we had to force link.  In this case, we need to force the
+	 * configuration of the MAC to match the "fc" parameter.
+	 */
+	if (mac->autoneg_failed) {
+		if (hw->phy.media_type == e1000_media_type_internal_serdes)
+			ret_val = igb_force_mac_fc(hw);
+	} else {
+		if (hw->phy.media_type == e1000_media_type_copper)
+			ret_val = igb_force_mac_fc(hw);
+	}
+
+	if (ret_val) {
+		hw_dbg("Error forcing flow control settings\n");
+		goto out;
+	}
+
+	/*
+	 * Check for the case where we have copper media and auto-neg is
+	 * enabled.  In this case, we need to check and see if Auto-Neg
+	 * has completed, and if so, how the PHY and link partner has
+	 * flow control configured.
+	 */
+	if ((hw->phy.media_type == e1000_media_type_copper) && mac->autoneg) {
+		/*
+		 * Read the MII Status Register and check to see if AutoNeg
+		 * has completed.  We read this twice because this reg has
+		 * some "sticky" (latched) bits.
+		 */
+		ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS,
+						   &mii_status_reg);
+		if (ret_val)
+			goto out;
+		ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS,
+						   &mii_status_reg);
+		if (ret_val)
+			goto out;
+
+		if (!(mii_status_reg & MII_SR_AUTONEG_COMPLETE)) {
+			hw_dbg("Copper PHY and Auto Neg "
+				 "has not completed.\n");
+			goto out;
+		}
+
+		/*
+		 * The AutoNeg process has completed, so we now need to
+		 * read both the Auto Negotiation Advertisement
+		 * Register (Address 4) and the Auto_Negotiation Base
+		 * Page Ability Register (Address 5) to determine how
+		 * flow control was negotiated.
+		 */
+		ret_val = hw->phy.ops.read_reg(hw, PHY_AUTONEG_ADV,
+					    &mii_nway_adv_reg);
+		if (ret_val)
+			goto out;
+		ret_val = hw->phy.ops.read_reg(hw, PHY_LP_ABILITY,
+					    &mii_nway_lp_ability_reg);
+		if (ret_val)
+			goto out;
+
+		/*
+		 * Two bits in the Auto Negotiation Advertisement Register
+		 * (Address 4) and two bits in the Auto Negotiation Base
+		 * Page Ability Register (Address 5) determine flow control
+		 * for both the PHY and the link partner.  The following
+		 * table, taken out of the IEEE 802.3ab/D6.0 dated March 25,
+		 * 1999, describes these PAUSE resolution bits and how flow
+		 * control is determined based upon these settings.
+		 * NOTE:  DC = Don't Care
+		 *
+		 *   LOCAL DEVICE  |   LINK PARTNER
+		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution
+		 *-------|---------|-------|---------|--------------------
+		 *   0   |    0    |  DC   |   DC    | e1000_fc_none
+		 *   0   |    1    |   0   |   DC    | e1000_fc_none
+		 *   0   |    1    |   1   |    0    | e1000_fc_none
+		 *   0   |    1    |   1   |    1    | e1000_fc_tx_pause
+		 *   1   |    0    |   0   |   DC    | e1000_fc_none
+		 *   1   |   DC    |   1   |   DC    | e1000_fc_full
+		 *   1   |    1    |   0   |    0    | e1000_fc_none
+		 *   1   |    1    |   0   |    1    | e1000_fc_rx_pause
+		 *
+		 * Are both PAUSE bits set to 1?  If so, this implies
+		 * Symmetric Flow Control is enabled at both ends.  The
+		 * ASM_DIR bits are irrelevant per the spec.
+		 *
+		 * For Symmetric Flow Control:
+		 *
+		 *   LOCAL DEVICE  |   LINK PARTNER
+		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+		 *-------|---------|-------|---------|--------------------
+		 *   1   |   DC    |   1   |   DC    | E1000_fc_full
+		 *
+		 */
+		if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+		    (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) {
+			/*
+			 * Now we need to check if the user selected RX ONLY
+			 * of pause frames.  In this case, we had to advertise
+			 * FULL flow control because we could not advertise RX
+			 * ONLY. Hence, we must now check to see if we need to
+			 * turn OFF  the TRANSMISSION of PAUSE frames.
+			 */
+			if (hw->fc.requested_mode == e1000_fc_full) {
+				hw->fc.current_mode = e1000_fc_full;
+				hw_dbg("Flow Control = FULL.\r\n");
+			} else {
+				hw->fc.current_mode = e1000_fc_rx_pause;
+				hw_dbg("Flow Control = "
+				       "RX PAUSE frames only.\r\n");
+			}
+		}
+		/*
+		 * For receiving PAUSE frames ONLY.
+		 *
+		 *   LOCAL DEVICE  |   LINK PARTNER
+		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+		 *-------|---------|-------|---------|--------------------
+		 *   0   |    1    |   1   |    1    | e1000_fc_tx_pause
+		 */
+		else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+			  (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
+			  (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
+			  (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
+			hw->fc.current_mode = e1000_fc_tx_pause;
+			hw_dbg("Flow Control = TX PAUSE frames only.\r\n");
+		}
+		/*
+		 * For transmitting PAUSE frames ONLY.
+		 *
+		 *   LOCAL DEVICE  |   LINK PARTNER
+		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+		 *-------|---------|-------|---------|--------------------
+		 *   1   |    1    |   0   |    1    | e1000_fc_rx_pause
+		 */
+		else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+			 (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
+			 !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
+			 (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
+			hw->fc.current_mode = e1000_fc_rx_pause;
+			hw_dbg("Flow Control = RX PAUSE frames only.\r\n");
+		}
+		/*
+		 * Per the IEEE spec, at this point flow control should be
+		 * disabled.  However, we want to consider that we could
+		 * be connected to a legacy switch that doesn't advertise
+		 * desired flow control, but can be forced on the link
+		 * partner.  So if we advertised no flow control, that is
+		 * what we will resolve to.  If we advertised some kind of
+		 * receive capability (Rx Pause Only or Full Flow Control)
+		 * and the link partner advertised none, we will configure
+		 * ourselves to enable Rx Flow Control only.  We can do
+		 * this safely for two reasons:  If the link partner really
+		 * didn't want flow control enabled, and we enable Rx, no
+		 * harm done since we won't be receiving any PAUSE frames
+		 * anyway.  If the intent on the link partner was to have
+		 * flow control enabled, then by us enabling RX only, we
+		 * can at least receive pause frames and process them.
+		 * This is a good idea because in most cases, since we are
+		 * predominantly a server NIC, more times than not we will
+		 * be asked to delay transmission of packets than asking
+		 * our link partner to pause transmission of frames.
+		 */
+		else if ((hw->fc.requested_mode == e1000_fc_none ||
+			  hw->fc.requested_mode == e1000_fc_tx_pause) ||
+			 hw->fc.strict_ieee) {
+			hw->fc.current_mode = e1000_fc_none;
+			hw_dbg("Flow Control = NONE.\r\n");
+		} else {
+			hw->fc.current_mode = e1000_fc_rx_pause;
+			hw_dbg("Flow Control = RX PAUSE frames only.\r\n");
+		}
+
+		/*
+		 * Now we need to do one last check...  If we auto-
+		 * negotiated to HALF DUPLEX, flow control should not be
+		 * enabled per IEEE 802.3 spec.
+		 */
+		ret_val = hw->mac.ops.get_speed_and_duplex(hw, &speed, &duplex);
+		if (ret_val) {
+			hw_dbg("Error getting link speed and duplex\n");
+			goto out;
+		}
+
+		if (duplex == HALF_DUPLEX)
+			hw->fc.current_mode = e1000_fc_none;
+
+		/*
+		 * Now we call a subroutine to actually force the MAC
+		 * controller to use the correct flow control settings.
+		 */
+		ret_val = igb_force_mac_fc(hw);
+		if (ret_val) {
+			hw_dbg("Error forcing flow control settings\n");
+			goto out;
+		}
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_get_speed_and_duplex_copper - Retrieve current speed/duplex
+ *  @hw: pointer to the HW structure
+ *  @speed: stores the current speed
+ *  @duplex: stores the current duplex
+ *
+ *  Read the status register for the current speed/duplex and store the current
+ *  speed and duplex for copper connections.
+ **/
+s32 igb_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed,
+				      u16 *duplex)
+{
+	u32 status;
+
+	status = rd32(E1000_STATUS);
+	if (status & E1000_STATUS_SPEED_1000) {
+		*speed = SPEED_1000;
+		hw_dbg("1000 Mbs, ");
+	} else if (status & E1000_STATUS_SPEED_100) {
+		*speed = SPEED_100;
+		hw_dbg("100 Mbs, ");
+	} else {
+		*speed = SPEED_10;
+		hw_dbg("10 Mbs, ");
+	}
+
+	if (status & E1000_STATUS_FD) {
+		*duplex = FULL_DUPLEX;
+		hw_dbg("Full Duplex\n");
+	} else {
+		*duplex = HALF_DUPLEX;
+		hw_dbg("Half Duplex\n");
+	}
+
+	return 0;
+}
+
+/**
+ *  igb_get_hw_semaphore - Acquire hardware semaphore
+ *  @hw: pointer to the HW structure
+ *
+ *  Acquire the HW semaphore to access the PHY or NVM
+ **/
+s32 igb_get_hw_semaphore(struct e1000_hw *hw)
+{
+	u32 swsm;
+	s32 ret_val = 0;
+	s32 timeout = hw->nvm.word_size + 1;
+	s32 i = 0;
+
+	/* Get the SW semaphore */
+	while (i < timeout) {
+		swsm = rd32(E1000_SWSM);
+		if (!(swsm & E1000_SWSM_SMBI))
+			break;
+
+		udelay(50);
+		i++;
+	}
+
+	if (i == timeout) {
+		hw_dbg("Driver can't access device - SMBI bit is set.\n");
+		ret_val = -E1000_ERR_NVM;
+		goto out;
+	}
+
+	/* Get the FW semaphore. */
+	for (i = 0; i < timeout; i++) {
+		swsm = rd32(E1000_SWSM);
+		wr32(E1000_SWSM, swsm | E1000_SWSM_SWESMBI);
+
+		/* Semaphore acquired if bit latched */
+		if (rd32(E1000_SWSM) & E1000_SWSM_SWESMBI)
+			break;
+
+		udelay(50);
+	}
+
+	if (i == timeout) {
+		/* Release semaphores */
+		igb_put_hw_semaphore(hw);
+		hw_dbg("Driver can't access the NVM\n");
+		ret_val = -E1000_ERR_NVM;
+		goto out;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_put_hw_semaphore - Release hardware semaphore
+ *  @hw: pointer to the HW structure
+ *
+ *  Release hardware semaphore used to access the PHY or NVM
+ **/
+void igb_put_hw_semaphore(struct e1000_hw *hw)
+{
+	u32 swsm;
+
+	swsm = rd32(E1000_SWSM);
+
+	swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI);
+
+	wr32(E1000_SWSM, swsm);
+}
+
+/**
+ *  igb_get_auto_rd_done - Check for auto read completion
+ *  @hw: pointer to the HW structure
+ *
+ *  Check EEPROM for Auto Read done bit.
+ **/
+s32 igb_get_auto_rd_done(struct e1000_hw *hw)
+{
+	s32 i = 0;
+	s32 ret_val = 0;
+
+
+	while (i < AUTO_READ_DONE_TIMEOUT) {
+		if (rd32(E1000_EECD) & E1000_EECD_AUTO_RD)
+			break;
+		msleep(1);
+		i++;
+	}
+
+	if (i == AUTO_READ_DONE_TIMEOUT) {
+		hw_dbg("Auto read by HW from NVM has not completed.\n");
+		ret_val = -E1000_ERR_RESET;
+		goto out;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_valid_led_default - Verify a valid default LED config
+ *  @hw: pointer to the HW structure
+ *  @data: pointer to the NVM (EEPROM)
+ *
+ *  Read the EEPROM for the current default LED configuration.  If the
+ *  LED configuration is not valid, set to a valid LED configuration.
+ **/
+static s32 igb_valid_led_default(struct e1000_hw *hw, u16 *data)
+{
+	s32 ret_val;
+
+	ret_val = hw->nvm.ops.read(hw, NVM_ID_LED_SETTINGS, 1, data);
+	if (ret_val) {
+		hw_dbg("NVM Read Error\n");
+		goto out;
+	}
+
+	if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) {
+		switch(hw->phy.media_type) {
+		case e1000_media_type_internal_serdes:
+			*data = ID_LED_DEFAULT_82575_SERDES;
+			break;
+		case e1000_media_type_copper:
+		default:
+			*data = ID_LED_DEFAULT;
+			break;
+		}
+	}
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_id_led_init -
+ *  @hw: pointer to the HW structure
+ *
+ **/
+s32 igb_id_led_init(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	s32 ret_val;
+	const u32 ledctl_mask = 0x000000FF;
+	const u32 ledctl_on = E1000_LEDCTL_MODE_LED_ON;
+	const u32 ledctl_off = E1000_LEDCTL_MODE_LED_OFF;
+	u16 data, i, temp;
+	const u16 led_mask = 0x0F;
+
+	ret_val = igb_valid_led_default(hw, &data);
+	if (ret_val)
+		goto out;
+
+	mac->ledctl_default = rd32(E1000_LEDCTL);
+	mac->ledctl_mode1 = mac->ledctl_default;
+	mac->ledctl_mode2 = mac->ledctl_default;
+
+	for (i = 0; i < 4; i++) {
+		temp = (data >> (i << 2)) & led_mask;
+		switch (temp) {
+		case ID_LED_ON1_DEF2:
+		case ID_LED_ON1_ON2:
+		case ID_LED_ON1_OFF2:
+			mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
+			mac->ledctl_mode1 |= ledctl_on << (i << 3);
+			break;
+		case ID_LED_OFF1_DEF2:
+		case ID_LED_OFF1_ON2:
+		case ID_LED_OFF1_OFF2:
+			mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
+			mac->ledctl_mode1 |= ledctl_off << (i << 3);
+			break;
+		default:
+			/* Do nothing */
+			break;
+		}
+		switch (temp) {
+		case ID_LED_DEF1_ON2:
+		case ID_LED_ON1_ON2:
+		case ID_LED_OFF1_ON2:
+			mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
+			mac->ledctl_mode2 |= ledctl_on << (i << 3);
+			break;
+		case ID_LED_DEF1_OFF2:
+		case ID_LED_ON1_OFF2:
+		case ID_LED_OFF1_OFF2:
+			mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
+			mac->ledctl_mode2 |= ledctl_off << (i << 3);
+			break;
+		default:
+			/* Do nothing */
+			break;
+		}
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_cleanup_led - Set LED config to default operation
+ *  @hw: pointer to the HW structure
+ *
+ *  Remove the current LED configuration and set the LED configuration
+ *  to the default value, saved from the EEPROM.
+ **/
+s32 igb_cleanup_led(struct e1000_hw *hw)
+{
+	wr32(E1000_LEDCTL, hw->mac.ledctl_default);
+	return 0;
+}
+
+/**
+ *  igb_blink_led - Blink LED
+ *  @hw: pointer to the HW structure
+ *
+ *  Blink the led's which are set to be on.
+ **/
+s32 igb_blink_led(struct e1000_hw *hw)
+{
+	u32 ledctl_blink = 0;
+	u32 i;
+
+	/*
+	 * set the blink bit for each LED that's "on" (0x0E)
+	 * in ledctl_mode2
+	 */
+	ledctl_blink = hw->mac.ledctl_mode2;
+	for (i = 0; i < 4; i++)
+		if (((hw->mac.ledctl_mode2 >> (i * 8)) & 0xFF) ==
+		    E1000_LEDCTL_MODE_LED_ON)
+			ledctl_blink |= (E1000_LEDCTL_LED0_BLINK <<
+					 (i * 8));
+
+	wr32(E1000_LEDCTL, ledctl_blink);
+
+	return 0;
+}
+
+/**
+ *  igb_led_off - Turn LED off
+ *  @hw: pointer to the HW structure
+ *
+ *  Turn LED off.
+ **/
+s32 igb_led_off(struct e1000_hw *hw)
+{
+	switch (hw->phy.media_type) {
+	case e1000_media_type_copper:
+		wr32(E1000_LEDCTL, hw->mac.ledctl_mode1);
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+/**
+ *  igb_disable_pcie_master - Disables PCI-express master access
+ *  @hw: pointer to the HW structure
+ *
+ *  Returns 0 (0) if successful, else returns -10
+ *  (-E1000_ERR_MASTER_REQUESTS_PENDING) if master disable bit has not casued
+ *  the master requests to be disabled.
+ *
+ *  Disables PCI-Express master access and verifies there are no pending
+ *  requests.
+ **/
+s32 igb_disable_pcie_master(struct e1000_hw *hw)
+{
+	u32 ctrl;
+	s32 timeout = MASTER_DISABLE_TIMEOUT;
+	s32 ret_val = 0;
+
+	if (hw->bus.type != e1000_bus_type_pci_express)
+		goto out;
+
+	ctrl = rd32(E1000_CTRL);
+	ctrl |= E1000_CTRL_GIO_MASTER_DISABLE;
+	wr32(E1000_CTRL, ctrl);
+
+	while (timeout) {
+		if (!(rd32(E1000_STATUS) &
+		      E1000_STATUS_GIO_MASTER_ENABLE))
+			break;
+		udelay(100);
+		timeout--;
+	}
+
+	if (!timeout) {
+		hw_dbg("Master requests are pending.\n");
+		ret_val = -E1000_ERR_MASTER_REQUESTS_PENDING;
+		goto out;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_validate_mdi_setting - Verify MDI/MDIx settings
+ *  @hw: pointer to the HW structure
+ *
+ *  Verify that when not using auto-negotitation that MDI/MDIx is correctly
+ *  set, which is forced to MDI mode only.
+ **/
+s32 igb_validate_mdi_setting(struct e1000_hw *hw)
+{
+	s32 ret_val = 0;
+
+	if (!hw->mac.autoneg && (hw->phy.mdix == 0 || hw->phy.mdix == 3)) {
+		hw_dbg("Invalid MDI setting detected\n");
+		hw->phy.mdix = 1;
+		ret_val = -E1000_ERR_CONFIG;
+		goto out;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_write_8bit_ctrl_reg - Write a 8bit CTRL register
+ *  @hw: pointer to the HW structure
+ *  @reg: 32bit register offset such as E1000_SCTL
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Writes an address/data control type register.  There are several of these
+ *  and they all have the format address << 8 | data and bit 31 is polled for
+ *  completion.
+ **/
+s32 igb_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg,
+			      u32 offset, u8 data)
+{
+	u32 i, regvalue = 0;
+	s32 ret_val = 0;
+
+	/* Set up the address and data */
+	regvalue = ((u32)data) | (offset << E1000_GEN_CTL_ADDRESS_SHIFT);
+	wr32(reg, regvalue);
+
+	/* Poll the ready bit to see if the MDI read completed */
+	for (i = 0; i < E1000_GEN_POLL_TIMEOUT; i++) {
+		udelay(5);
+		regvalue = rd32(reg);
+		if (regvalue & E1000_GEN_CTL_READY)
+			break;
+	}
+	if (!(regvalue & E1000_GEN_CTL_READY)) {
+		hw_dbg("Reg %08x did not indicate ready\n", reg);
+		ret_val = -E1000_ERR_PHY;
+		goto out;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_enable_mng_pass_thru - Enable processing of ARP's
+ *  @hw: pointer to the HW structure
+ *
+ *  Verifies the hardware needs to leave interface enabled so that frames can
+ *  be directed to and from the management interface.
+ **/
+bool igb_enable_mng_pass_thru(struct e1000_hw *hw)
+{
+	u32 manc;
+	u32 fwsm, factps;
+	bool ret_val = false;
+
+	if (!hw->mac.asf_firmware_present)
+		goto out;
+
+	manc = rd32(E1000_MANC);
+
+	if (!(manc & E1000_MANC_RCV_TCO_EN))
+		goto out;
+
+	if (hw->mac.arc_subsystem_valid) {
+		fwsm = rd32(E1000_FWSM);
+		factps = rd32(E1000_FACTPS);
+
+		if (!(factps & E1000_FACTPS_MNGCG) &&
+		    ((fwsm & E1000_FWSM_MODE_MASK) ==
+		     (e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT))) {
+			ret_val = true;
+			goto out;
+		}
+	} else {
+		if ((manc & E1000_MANC_SMBUS_EN) &&
+		    !(manc & E1000_MANC_ASF_EN)) {
+			ret_val = true;
+			goto out;
+		}
+	}
+
+out:
+	return ret_val;
+}
diff --git a/drivers/net/ethernet/intel/igb/e1000_mac.h b/drivers/net/ethernet/intel/igb/e1000_mac.h
new file mode 100644
index 00000000000..e45996b4ea3
--- /dev/null
+++ b/drivers/net/ethernet/intel/igb/e1000_mac.h
@@ -0,0 +1,91 @@
+/*******************************************************************************
+
+  Intel(R) Gigabit Ethernet Linux driver
+  Copyright(c) 2007-2011 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_MAC_H_
+#define _E1000_MAC_H_
+
+#include "e1000_hw.h"
+
+#include "e1000_phy.h"
+#include "e1000_nvm.h"
+#include "e1000_defines.h"
+
+/*
+ * Functions that should not be called directly from drivers but can be used
+ * by other files in this 'shared code'
+ */
+s32  igb_blink_led(struct e1000_hw *hw);
+s32  igb_check_for_copper_link(struct e1000_hw *hw);
+s32  igb_cleanup_led(struct e1000_hw *hw);
+s32  igb_config_fc_after_link_up(struct e1000_hw *hw);
+s32  igb_disable_pcie_master(struct e1000_hw *hw);
+s32  igb_force_mac_fc(struct e1000_hw *hw);
+s32  igb_get_auto_rd_done(struct e1000_hw *hw);
+s32  igb_get_bus_info_pcie(struct e1000_hw *hw);
+s32  igb_get_hw_semaphore(struct e1000_hw *hw);
+s32  igb_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed,
+				       u16 *duplex);
+s32  igb_id_led_init(struct e1000_hw *hw);
+s32  igb_led_off(struct e1000_hw *hw);
+void igb_update_mc_addr_list(struct e1000_hw *hw,
+	                     u8 *mc_addr_list, u32 mc_addr_count);
+s32  igb_setup_link(struct e1000_hw *hw);
+s32  igb_validate_mdi_setting(struct e1000_hw *hw);
+s32  igb_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg,
+			       u32 offset, u8 data);
+
+void igb_clear_hw_cntrs_base(struct e1000_hw *hw);
+void igb_clear_vfta(struct e1000_hw *hw);
+void igb_clear_vfta_i350(struct e1000_hw *hw);
+s32  igb_vfta_set(struct e1000_hw *hw, u32 vid, bool add);
+void igb_config_collision_dist(struct e1000_hw *hw);
+void igb_init_rx_addrs(struct e1000_hw *hw, u16 rar_count);
+void igb_mta_set(struct e1000_hw *hw, u32 hash_value);
+void igb_put_hw_semaphore(struct e1000_hw *hw);
+void igb_rar_set(struct e1000_hw *hw, u8 *addr, u32 index);
+s32  igb_check_alt_mac_addr(struct e1000_hw *hw);
+
+bool igb_enable_mng_pass_thru(struct e1000_hw *hw);
+
+enum e1000_mng_mode {
+	e1000_mng_mode_none = 0,
+	e1000_mng_mode_asf,
+	e1000_mng_mode_pt,
+	e1000_mng_mode_ipmi,
+	e1000_mng_mode_host_if_only
+};
+
+#define E1000_FACTPS_MNGCG    0x20000000
+
+#define E1000_FWSM_MODE_MASK  0xE
+#define E1000_FWSM_MODE_SHIFT 1
+
+#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN    0x2
+
+extern void e1000_init_function_pointers_82575(struct e1000_hw *hw);
+
+#endif
diff --git a/drivers/net/ethernet/intel/igb/e1000_mbx.c b/drivers/net/ethernet/intel/igb/e1000_mbx.c
new file mode 100644
index 00000000000..469d95eaa15
--- /dev/null
+++ b/drivers/net/ethernet/intel/igb/e1000_mbx.c
@@ -0,0 +1,446 @@
+/*******************************************************************************
+
+  Intel(R) Gigabit Ethernet Linux driver
+  Copyright(c) 2007-2011 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "e1000_mbx.h"
+
+/**
+ *  igb_read_mbx - Reads a message from the mailbox
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *  @mbx_id: id of mailbox to read
+ *
+ *  returns SUCCESS if it successfully read message from buffer
+ **/
+s32 igb_read_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id)
+{
+	struct e1000_mbx_info *mbx = &hw->mbx;
+	s32 ret_val = -E1000_ERR_MBX;
+
+	/* limit read to size of mailbox */
+	if (size > mbx->size)
+		size = mbx->size;
+
+	if (mbx->ops.read)
+		ret_val = mbx->ops.read(hw, msg, size, mbx_id);
+
+	return ret_val;
+}
+
+/**
+ *  igb_write_mbx - Write a message to the mailbox
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *  @mbx_id: id of mailbox to write
+ *
+ *  returns SUCCESS if it successfully copied message into the buffer
+ **/
+s32 igb_write_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id)
+{
+	struct e1000_mbx_info *mbx = &hw->mbx;
+	s32 ret_val = 0;
+
+	if (size > mbx->size)
+		ret_val = -E1000_ERR_MBX;
+
+	else if (mbx->ops.write)
+		ret_val = mbx->ops.write(hw, msg, size, mbx_id);
+
+	return ret_val;
+}
+
+/**
+ *  igb_check_for_msg - checks to see if someone sent us mail
+ *  @hw: pointer to the HW structure
+ *  @mbx_id: id of mailbox to check
+ *
+ *  returns SUCCESS if the Status bit was found or else ERR_MBX
+ **/
+s32 igb_check_for_msg(struct e1000_hw *hw, u16 mbx_id)
+{
+	struct e1000_mbx_info *mbx = &hw->mbx;
+	s32 ret_val = -E1000_ERR_MBX;
+
+	if (mbx->ops.check_for_msg)
+		ret_val = mbx->ops.check_for_msg(hw, mbx_id);
+
+	return ret_val;
+}
+
+/**
+ *  igb_check_for_ack - checks to see if someone sent us ACK
+ *  @hw: pointer to the HW structure
+ *  @mbx_id: id of mailbox to check
+ *
+ *  returns SUCCESS if the Status bit was found or else ERR_MBX
+ **/
+s32 igb_check_for_ack(struct e1000_hw *hw, u16 mbx_id)
+{
+	struct e1000_mbx_info *mbx = &hw->mbx;
+	s32 ret_val = -E1000_ERR_MBX;
+
+	if (mbx->ops.check_for_ack)
+		ret_val = mbx->ops.check_for_ack(hw, mbx_id);
+
+	return ret_val;
+}
+
+/**
+ *  igb_check_for_rst - checks to see if other side has reset
+ *  @hw: pointer to the HW structure
+ *  @mbx_id: id of mailbox to check
+ *
+ *  returns SUCCESS if the Status bit was found or else ERR_MBX
+ **/
+s32 igb_check_for_rst(struct e1000_hw *hw, u16 mbx_id)
+{
+	struct e1000_mbx_info *mbx = &hw->mbx;
+	s32 ret_val = -E1000_ERR_MBX;
+
+	if (mbx->ops.check_for_rst)
+		ret_val = mbx->ops.check_for_rst(hw, mbx_id);
+
+	return ret_val;
+}
+
+/**
+ *  igb_poll_for_msg - Wait for message notification
+ *  @hw: pointer to the HW structure
+ *  @mbx_id: id of mailbox to write
+ *
+ *  returns SUCCESS if it successfully received a message notification
+ **/
+static s32 igb_poll_for_msg(struct e1000_hw *hw, u16 mbx_id)
+{
+	struct e1000_mbx_info *mbx = &hw->mbx;
+	int countdown = mbx->timeout;
+
+	if (!countdown || !mbx->ops.check_for_msg)
+		goto out;
+
+	while (countdown && mbx->ops.check_for_msg(hw, mbx_id)) {
+		countdown--;
+		if (!countdown)
+			break;
+		udelay(mbx->usec_delay);
+	}
+
+	/* if we failed, all future posted messages fail until reset */
+	if (!countdown)
+		mbx->timeout = 0;
+out:
+	return countdown ? 0 : -E1000_ERR_MBX;
+}
+
+/**
+ *  igb_poll_for_ack - Wait for message acknowledgement
+ *  @hw: pointer to the HW structure
+ *  @mbx_id: id of mailbox to write
+ *
+ *  returns SUCCESS if it successfully received a message acknowledgement
+ **/
+static s32 igb_poll_for_ack(struct e1000_hw *hw, u16 mbx_id)
+{
+	struct e1000_mbx_info *mbx = &hw->mbx;
+	int countdown = mbx->timeout;
+
+	if (!countdown || !mbx->ops.check_for_ack)
+		goto out;
+
+	while (countdown && mbx->ops.check_for_ack(hw, mbx_id)) {
+		countdown--;
+		if (!countdown)
+			break;
+		udelay(mbx->usec_delay);
+	}
+
+	/* if we failed, all future posted messages fail until reset */
+	if (!countdown)
+		mbx->timeout = 0;
+out:
+	return countdown ? 0 : -E1000_ERR_MBX;
+}
+
+/**
+ *  igb_read_posted_mbx - Wait for message notification and receive message
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *  @mbx_id: id of mailbox to write
+ *
+ *  returns SUCCESS if it successfully received a message notification and
+ *  copied it into the receive buffer.
+ **/
+static s32 igb_read_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id)
+{
+	struct e1000_mbx_info *mbx = &hw->mbx;
+	s32 ret_val = -E1000_ERR_MBX;
+
+	if (!mbx->ops.read)
+		goto out;
+
+	ret_val = igb_poll_for_msg(hw, mbx_id);
+
+	if (!ret_val)
+		ret_val = mbx->ops.read(hw, msg, size, mbx_id);
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_write_posted_mbx - Write a message to the mailbox, wait for ack
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *  @mbx_id: id of mailbox to write
+ *
+ *  returns SUCCESS if it successfully copied message into the buffer and
+ *  received an ack to that message within delay * timeout period
+ **/
+static s32 igb_write_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id)
+{
+	struct e1000_mbx_info *mbx = &hw->mbx;
+	s32 ret_val = -E1000_ERR_MBX;
+
+	/* exit if either we can't write or there isn't a defined timeout */
+	if (!mbx->ops.write || !mbx->timeout)
+		goto out;
+
+	/* send msg */
+	ret_val = mbx->ops.write(hw, msg, size, mbx_id);
+
+	/* if msg sent wait until we receive an ack */
+	if (!ret_val)
+		ret_val = igb_poll_for_ack(hw, mbx_id);
+out:
+	return ret_val;
+}
+
+static s32 igb_check_for_bit_pf(struct e1000_hw *hw, u32 mask)
+{
+	u32 mbvficr = rd32(E1000_MBVFICR);
+	s32 ret_val = -E1000_ERR_MBX;
+
+	if (mbvficr & mask) {
+		ret_val = 0;
+		wr32(E1000_MBVFICR, mask);
+	}
+
+	return ret_val;
+}
+
+/**
+ *  igb_check_for_msg_pf - checks to see if the VF has sent mail
+ *  @hw: pointer to the HW structure
+ *  @vf_number: the VF index
+ *
+ *  returns SUCCESS if the VF has set the Status bit or else ERR_MBX
+ **/
+static s32 igb_check_for_msg_pf(struct e1000_hw *hw, u16 vf_number)
+{
+	s32 ret_val = -E1000_ERR_MBX;
+
+	if (!igb_check_for_bit_pf(hw, E1000_MBVFICR_VFREQ_VF1 << vf_number)) {
+		ret_val = 0;
+		hw->mbx.stats.reqs++;
+	}
+
+	return ret_val;
+}
+
+/**
+ *  igb_check_for_ack_pf - checks to see if the VF has ACKed
+ *  @hw: pointer to the HW structure
+ *  @vf_number: the VF index
+ *
+ *  returns SUCCESS if the VF has set the Status bit or else ERR_MBX
+ **/
+static s32 igb_check_for_ack_pf(struct e1000_hw *hw, u16 vf_number)
+{
+	s32 ret_val = -E1000_ERR_MBX;
+
+	if (!igb_check_for_bit_pf(hw, E1000_MBVFICR_VFACK_VF1 << vf_number)) {
+		ret_val = 0;
+		hw->mbx.stats.acks++;
+	}
+
+	return ret_val;
+}
+
+/**
+ *  igb_check_for_rst_pf - checks to see if the VF has reset
+ *  @hw: pointer to the HW structure
+ *  @vf_number: the VF index
+ *
+ *  returns SUCCESS if the VF has set the Status bit or else ERR_MBX
+ **/
+static s32 igb_check_for_rst_pf(struct e1000_hw *hw, u16 vf_number)
+{
+	u32 vflre = rd32(E1000_VFLRE);
+	s32 ret_val = -E1000_ERR_MBX;
+
+	if (vflre & (1 << vf_number)) {
+		ret_val = 0;
+		wr32(E1000_VFLRE, (1 << vf_number));
+		hw->mbx.stats.rsts++;
+	}
+
+	return ret_val;
+}
+
+/**
+ *  igb_obtain_mbx_lock_pf - obtain mailbox lock
+ *  @hw: pointer to the HW structure
+ *  @vf_number: the VF index
+ *
+ *  return SUCCESS if we obtained the mailbox lock
+ **/
+static s32 igb_obtain_mbx_lock_pf(struct e1000_hw *hw, u16 vf_number)
+{
+	s32 ret_val = -E1000_ERR_MBX;
+	u32 p2v_mailbox;
+
+
+	/* Take ownership of the buffer */
+	wr32(E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_PFU);
+
+	/* reserve mailbox for vf use */
+	p2v_mailbox = rd32(E1000_P2VMAILBOX(vf_number));
+	if (p2v_mailbox & E1000_P2VMAILBOX_PFU)
+		ret_val = 0;
+
+	return ret_val;
+}
+
+/**
+ *  igb_write_mbx_pf - Places a message in the mailbox
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *  @vf_number: the VF index
+ *
+ *  returns SUCCESS if it successfully copied message into the buffer
+ **/
+static s32 igb_write_mbx_pf(struct e1000_hw *hw, u32 *msg, u16 size,
+                              u16 vf_number)
+{
+	s32 ret_val;
+	u16 i;
+
+	/* lock the mailbox to prevent pf/vf race condition */
+	ret_val = igb_obtain_mbx_lock_pf(hw, vf_number);
+	if (ret_val)
+		goto out_no_write;
+
+	/* flush msg and acks as we are overwriting the message buffer */
+	igb_check_for_msg_pf(hw, vf_number);
+	igb_check_for_ack_pf(hw, vf_number);
+
+	/* copy the caller specified message to the mailbox memory buffer */
+	for (i = 0; i < size; i++)
+		array_wr32(E1000_VMBMEM(vf_number), i, msg[i]);
+
+	/* Interrupt VF to tell it a message has been sent and release buffer*/
+	wr32(E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_STS);
+
+	/* update stats */
+	hw->mbx.stats.msgs_tx++;
+
+out_no_write:
+	return ret_val;
+
+}
+
+/**
+ *  igb_read_mbx_pf - Read a message from the mailbox
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *  @vf_number: the VF index
+ *
+ *  This function copies a message from the mailbox buffer to the caller's
+ *  memory buffer.  The presumption is that the caller knows that there was
+ *  a message due to a VF request so no polling for message is needed.
+ **/
+static s32 igb_read_mbx_pf(struct e1000_hw *hw, u32 *msg, u16 size,
+                             u16 vf_number)
+{
+	s32 ret_val;
+	u16 i;
+
+	/* lock the mailbox to prevent pf/vf race condition */
+	ret_val = igb_obtain_mbx_lock_pf(hw, vf_number);
+	if (ret_val)
+		goto out_no_read;
+
+	/* copy the message to the mailbox memory buffer */
+	for (i = 0; i < size; i++)
+		msg[i] = array_rd32(E1000_VMBMEM(vf_number), i);
+
+	/* Acknowledge the message and release buffer */
+	wr32(E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_ACK);
+
+	/* update stats */
+	hw->mbx.stats.msgs_rx++;
+
+out_no_read:
+	return ret_val;
+}
+
+/**
+ *  e1000_init_mbx_params_pf - set initial values for pf mailbox
+ *  @hw: pointer to the HW structure
+ *
+ *  Initializes the hw->mbx struct to correct values for pf mailbox
+ */
+s32 igb_init_mbx_params_pf(struct e1000_hw *hw)
+{
+	struct e1000_mbx_info *mbx = &hw->mbx;
+
+	mbx->timeout = 0;
+	mbx->usec_delay = 0;
+
+	mbx->size = E1000_VFMAILBOX_SIZE;
+
+	mbx->ops.read = igb_read_mbx_pf;
+	mbx->ops.write = igb_write_mbx_pf;
+	mbx->ops.read_posted = igb_read_posted_mbx;
+	mbx->ops.write_posted = igb_write_posted_mbx;
+	mbx->ops.check_for_msg = igb_check_for_msg_pf;
+	mbx->ops.check_for_ack = igb_check_for_ack_pf;
+	mbx->ops.check_for_rst = igb_check_for_rst_pf;
+
+	mbx->stats.msgs_tx = 0;
+	mbx->stats.msgs_rx = 0;
+	mbx->stats.reqs = 0;
+	mbx->stats.acks = 0;
+	mbx->stats.rsts = 0;
+
+	return 0;
+}
+
diff --git a/drivers/net/ethernet/intel/igb/e1000_mbx.h b/drivers/net/ethernet/intel/igb/e1000_mbx.h
new file mode 100644
index 00000000000..eddb0f83dce
--- /dev/null
+++ b/drivers/net/ethernet/intel/igb/e1000_mbx.h
@@ -0,0 +1,77 @@
+/*******************************************************************************
+
+  Intel(R) Gigabit Ethernet Linux driver
+  Copyright(c) 2007-2011 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_MBX_H_
+#define _E1000_MBX_H_
+
+#include "e1000_hw.h"
+
+#define E1000_P2VMAILBOX_STS   0x00000001 /* Initiate message send to VF */
+#define E1000_P2VMAILBOX_ACK   0x00000002 /* Ack message recv'd from VF */
+#define E1000_P2VMAILBOX_VFU   0x00000004 /* VF owns the mailbox buffer */
+#define E1000_P2VMAILBOX_PFU   0x00000008 /* PF owns the mailbox buffer */
+#define E1000_P2VMAILBOX_RVFU  0x00000010 /* Reset VFU - used when VF stuck */
+
+#define E1000_MBVFICR_VFREQ_MASK 0x000000FF /* bits for VF messages */
+#define E1000_MBVFICR_VFREQ_VF1  0x00000001 /* bit for VF 1 message */
+#define E1000_MBVFICR_VFACK_MASK 0x00FF0000 /* bits for VF acks */
+#define E1000_MBVFICR_VFACK_VF1  0x00010000 /* bit for VF 1 ack */
+
+#define E1000_VFMAILBOX_SIZE   16 /* 16 32 bit words - 64 bytes */
+
+/* If it's a E1000_VF_* msg then it originates in the VF and is sent to the
+ * PF.  The reverse is true if it is E1000_PF_*.
+ * Message ACK's are the value or'd with 0xF0000000
+ */
+#define E1000_VT_MSGTYPE_ACK      0x80000000  /* Messages below or'd with
+                                               * this are the ACK */
+#define E1000_VT_MSGTYPE_NACK     0x40000000  /* Messages below or'd with
+                                               * this are the NACK */
+#define E1000_VT_MSGTYPE_CTS      0x20000000  /* Indicates that VF is still
+                                                 clear to send requests */
+#define E1000_VT_MSGINFO_SHIFT    16
+/* bits 23:16 are used for exra info for certain messages */
+#define E1000_VT_MSGINFO_MASK     (0xFF << E1000_VT_MSGINFO_SHIFT)
+
+#define E1000_VF_RESET            0x01 /* VF requests reset */
+#define E1000_VF_SET_MAC_ADDR     0x02 /* VF requests to set MAC addr */
+#define E1000_VF_SET_MULTICAST    0x03 /* VF requests to set MC addr */
+#define E1000_VF_SET_VLAN         0x04 /* VF requests to set VLAN */
+#define E1000_VF_SET_LPE          0x05 /* VF requests to set VMOLR.LPE */
+#define E1000_VF_SET_PROMISC      0x06 /*VF requests to clear VMOLR.ROPE/MPME*/
+#define E1000_VF_SET_PROMISC_MULTICAST    (0x02 << E1000_VT_MSGINFO_SHIFT)
+
+#define E1000_PF_CONTROL_MSG      0x0100 /* PF control message */
+
+s32 igb_read_mbx(struct e1000_hw *, u32 *, u16, u16);
+s32 igb_write_mbx(struct e1000_hw *, u32 *, u16, u16);
+s32 igb_check_for_msg(struct e1000_hw *, u16);
+s32 igb_check_for_ack(struct e1000_hw *, u16);
+s32 igb_check_for_rst(struct e1000_hw *, u16);
+s32 igb_init_mbx_params_pf(struct e1000_hw *);
+
+#endif /* _E1000_MBX_H_ */
diff --git a/drivers/net/ethernet/intel/igb/e1000_nvm.c b/drivers/net/ethernet/intel/igb/e1000_nvm.c
new file mode 100644
index 00000000000..40407124e72
--- /dev/null
+++ b/drivers/net/ethernet/intel/igb/e1000_nvm.c
@@ -0,0 +1,713 @@
+/*******************************************************************************
+
+  Intel(R) Gigabit Ethernet Linux driver
+  Copyright(c) 2007-2011 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/if_ether.h>
+#include <linux/delay.h>
+
+#include "e1000_mac.h"
+#include "e1000_nvm.h"
+
+/**
+ *  igb_raise_eec_clk - Raise EEPROM clock
+ *  @hw: pointer to the HW structure
+ *  @eecd: pointer to the EEPROM
+ *
+ *  Enable/Raise the EEPROM clock bit.
+ **/
+static void igb_raise_eec_clk(struct e1000_hw *hw, u32 *eecd)
+{
+	*eecd = *eecd | E1000_EECD_SK;
+	wr32(E1000_EECD, *eecd);
+	wrfl();
+	udelay(hw->nvm.delay_usec);
+}
+
+/**
+ *  igb_lower_eec_clk - Lower EEPROM clock
+ *  @hw: pointer to the HW structure
+ *  @eecd: pointer to the EEPROM
+ *
+ *  Clear/Lower the EEPROM clock bit.
+ **/
+static void igb_lower_eec_clk(struct e1000_hw *hw, u32 *eecd)
+{
+	*eecd = *eecd & ~E1000_EECD_SK;
+	wr32(E1000_EECD, *eecd);
+	wrfl();
+	udelay(hw->nvm.delay_usec);
+}
+
+/**
+ *  igb_shift_out_eec_bits - Shift data bits our to the EEPROM
+ *  @hw: pointer to the HW structure
+ *  @data: data to send to the EEPROM
+ *  @count: number of bits to shift out
+ *
+ *  We need to shift 'count' bits out to the EEPROM.  So, the value in the
+ *  "data" parameter will be shifted out to the EEPROM one bit at a time.
+ *  In order to do this, "data" must be broken down into bits.
+ **/
+static void igb_shift_out_eec_bits(struct e1000_hw *hw, u16 data, u16 count)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	u32 eecd = rd32(E1000_EECD);
+	u32 mask;
+
+	mask = 0x01 << (count - 1);
+	if (nvm->type == e1000_nvm_eeprom_spi)
+		eecd |= E1000_EECD_DO;
+
+	do {
+		eecd &= ~E1000_EECD_DI;
+
+		if (data & mask)
+			eecd |= E1000_EECD_DI;
+
+		wr32(E1000_EECD, eecd);
+		wrfl();
+
+		udelay(nvm->delay_usec);
+
+		igb_raise_eec_clk(hw, &eecd);
+		igb_lower_eec_clk(hw, &eecd);
+
+		mask >>= 1;
+	} while (mask);
+
+	eecd &= ~E1000_EECD_DI;
+	wr32(E1000_EECD, eecd);
+}
+
+/**
+ *  igb_shift_in_eec_bits - Shift data bits in from the EEPROM
+ *  @hw: pointer to the HW structure
+ *  @count: number of bits to shift in
+ *
+ *  In order to read a register from the EEPROM, we need to shift 'count' bits
+ *  in from the EEPROM.  Bits are "shifted in" by raising the clock input to
+ *  the EEPROM (setting the SK bit), and then reading the value of the data out
+ *  "DO" bit.  During this "shifting in" process the data in "DI" bit should
+ *  always be clear.
+ **/
+static u16 igb_shift_in_eec_bits(struct e1000_hw *hw, u16 count)
+{
+	u32 eecd;
+	u32 i;
+	u16 data;
+
+	eecd = rd32(E1000_EECD);
+
+	eecd &= ~(E1000_EECD_DO | E1000_EECD_DI);
+	data = 0;
+
+	for (i = 0; i < count; i++) {
+		data <<= 1;
+		igb_raise_eec_clk(hw, &eecd);
+
+		eecd = rd32(E1000_EECD);
+
+		eecd &= ~E1000_EECD_DI;
+		if (eecd & E1000_EECD_DO)
+			data |= 1;
+
+		igb_lower_eec_clk(hw, &eecd);
+	}
+
+	return data;
+}
+
+/**
+ *  igb_poll_eerd_eewr_done - Poll for EEPROM read/write completion
+ *  @hw: pointer to the HW structure
+ *  @ee_reg: EEPROM flag for polling
+ *
+ *  Polls the EEPROM status bit for either read or write completion based
+ *  upon the value of 'ee_reg'.
+ **/
+static s32 igb_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg)
+{
+	u32 attempts = 100000;
+	u32 i, reg = 0;
+	s32 ret_val = -E1000_ERR_NVM;
+
+	for (i = 0; i < attempts; i++) {
+		if (ee_reg == E1000_NVM_POLL_READ)
+			reg = rd32(E1000_EERD);
+		else
+			reg = rd32(E1000_EEWR);
+
+		if (reg & E1000_NVM_RW_REG_DONE) {
+			ret_val = 0;
+			break;
+		}
+
+		udelay(5);
+	}
+
+	return ret_val;
+}
+
+/**
+ *  igb_acquire_nvm - Generic request for access to EEPROM
+ *  @hw: pointer to the HW structure
+ *
+ *  Set the EEPROM access request bit and wait for EEPROM access grant bit.
+ *  Return successful if access grant bit set, else clear the request for
+ *  EEPROM access and return -E1000_ERR_NVM (-1).
+ **/
+s32 igb_acquire_nvm(struct e1000_hw *hw)
+{
+	u32 eecd = rd32(E1000_EECD);
+	s32 timeout = E1000_NVM_GRANT_ATTEMPTS;
+	s32 ret_val = 0;
+
+
+	wr32(E1000_EECD, eecd | E1000_EECD_REQ);
+	eecd = rd32(E1000_EECD);
+
+	while (timeout) {
+		if (eecd & E1000_EECD_GNT)
+			break;
+		udelay(5);
+		eecd = rd32(E1000_EECD);
+		timeout--;
+	}
+
+	if (!timeout) {
+		eecd &= ~E1000_EECD_REQ;
+		wr32(E1000_EECD, eecd);
+		hw_dbg("Could not acquire NVM grant\n");
+		ret_val = -E1000_ERR_NVM;
+	}
+
+	return ret_val;
+}
+
+/**
+ *  igb_standby_nvm - Return EEPROM to standby state
+ *  @hw: pointer to the HW structure
+ *
+ *  Return the EEPROM to a standby state.
+ **/
+static void igb_standby_nvm(struct e1000_hw *hw)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	u32 eecd = rd32(E1000_EECD);
+
+	if (nvm->type == e1000_nvm_eeprom_spi) {
+		/* Toggle CS to flush commands */
+		eecd |= E1000_EECD_CS;
+		wr32(E1000_EECD, eecd);
+		wrfl();
+		udelay(nvm->delay_usec);
+		eecd &= ~E1000_EECD_CS;
+		wr32(E1000_EECD, eecd);
+		wrfl();
+		udelay(nvm->delay_usec);
+	}
+}
+
+/**
+ *  e1000_stop_nvm - Terminate EEPROM command
+ *  @hw: pointer to the HW structure
+ *
+ *  Terminates the current command by inverting the EEPROM's chip select pin.
+ **/
+static void e1000_stop_nvm(struct e1000_hw *hw)
+{
+	u32 eecd;
+
+	eecd = rd32(E1000_EECD);
+	if (hw->nvm.type == e1000_nvm_eeprom_spi) {
+		/* Pull CS high */
+		eecd |= E1000_EECD_CS;
+		igb_lower_eec_clk(hw, &eecd);
+	}
+}
+
+/**
+ *  igb_release_nvm - Release exclusive access to EEPROM
+ *  @hw: pointer to the HW structure
+ *
+ *  Stop any current commands to the EEPROM and clear the EEPROM request bit.
+ **/
+void igb_release_nvm(struct e1000_hw *hw)
+{
+	u32 eecd;
+
+	e1000_stop_nvm(hw);
+
+	eecd = rd32(E1000_EECD);
+	eecd &= ~E1000_EECD_REQ;
+	wr32(E1000_EECD, eecd);
+}
+
+/**
+ *  igb_ready_nvm_eeprom - Prepares EEPROM for read/write
+ *  @hw: pointer to the HW structure
+ *
+ *  Setups the EEPROM for reading and writing.
+ **/
+static s32 igb_ready_nvm_eeprom(struct e1000_hw *hw)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	u32 eecd = rd32(E1000_EECD);
+	s32 ret_val = 0;
+	u16 timeout = 0;
+	u8 spi_stat_reg;
+
+
+	if (nvm->type == e1000_nvm_eeprom_spi) {
+		/* Clear SK and CS */
+		eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
+		wr32(E1000_EECD, eecd);
+		wrfl();
+		udelay(1);
+		timeout = NVM_MAX_RETRY_SPI;
+
+		/*
+		 * Read "Status Register" repeatedly until the LSB is cleared.
+		 * The EEPROM will signal that the command has been completed
+		 * by clearing bit 0 of the internal status register.  If it's
+		 * not cleared within 'timeout', then error out.
+		 */
+		while (timeout) {
+			igb_shift_out_eec_bits(hw, NVM_RDSR_OPCODE_SPI,
+						 hw->nvm.opcode_bits);
+			spi_stat_reg = (u8)igb_shift_in_eec_bits(hw, 8);
+			if (!(spi_stat_reg & NVM_STATUS_RDY_SPI))
+				break;
+
+			udelay(5);
+			igb_standby_nvm(hw);
+			timeout--;
+		}
+
+		if (!timeout) {
+			hw_dbg("SPI NVM Status error\n");
+			ret_val = -E1000_ERR_NVM;
+			goto out;
+		}
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_read_nvm_spi - Read EEPROM's using SPI
+ *  @hw: pointer to the HW structure
+ *  @offset: offset of word in the EEPROM to read
+ *  @words: number of words to read
+ *  @data: word read from the EEPROM
+ *
+ *  Reads a 16 bit word from the EEPROM.
+ **/
+s32 igb_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	u32 i = 0;
+	s32 ret_val;
+	u16 word_in;
+	u8 read_opcode = NVM_READ_OPCODE_SPI;
+
+	/*
+	 * A check for invalid values:  offset too large, too many words,
+	 * and not enough words.
+	 */
+	if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
+	    (words == 0)) {
+		hw_dbg("nvm parameter(s) out of bounds\n");
+		ret_val = -E1000_ERR_NVM;
+		goto out;
+	}
+
+	ret_val = nvm->ops.acquire(hw);
+	if (ret_val)
+		goto out;
+
+	ret_val = igb_ready_nvm_eeprom(hw);
+	if (ret_val)
+		goto release;
+
+	igb_standby_nvm(hw);
+
+	if ((nvm->address_bits == 8) && (offset >= 128))
+		read_opcode |= NVM_A8_OPCODE_SPI;
+
+	/* Send the READ command (opcode + addr) */
+	igb_shift_out_eec_bits(hw, read_opcode, nvm->opcode_bits);
+	igb_shift_out_eec_bits(hw, (u16)(offset*2), nvm->address_bits);
+
+	/*
+	 * Read the data.  SPI NVMs increment the address with each byte
+	 * read and will roll over if reading beyond the end.  This allows
+	 * us to read the whole NVM from any offset
+	 */
+	for (i = 0; i < words; i++) {
+		word_in = igb_shift_in_eec_bits(hw, 16);
+		data[i] = (word_in >> 8) | (word_in << 8);
+	}
+
+release:
+	nvm->ops.release(hw);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_read_nvm_eerd - Reads EEPROM using EERD register
+ *  @hw: pointer to the HW structure
+ *  @offset: offset of word in the EEPROM to read
+ *  @words: number of words to read
+ *  @data: word read from the EEPROM
+ *
+ *  Reads a 16 bit word from the EEPROM using the EERD register.
+ **/
+s32 igb_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	u32 i, eerd = 0;
+	s32 ret_val = 0;
+
+	/*
+	 * A check for invalid values:  offset too large, too many words,
+	 * and not enough words.
+	 */
+	if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
+	    (words == 0)) {
+		hw_dbg("nvm parameter(s) out of bounds\n");
+		ret_val = -E1000_ERR_NVM;
+		goto out;
+	}
+
+	for (i = 0; i < words; i++) {
+		eerd = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) +
+		       E1000_NVM_RW_REG_START;
+
+		wr32(E1000_EERD, eerd);
+		ret_val = igb_poll_eerd_eewr_done(hw, E1000_NVM_POLL_READ);
+		if (ret_val)
+			break;
+
+		data[i] = (rd32(E1000_EERD) >>
+			E1000_NVM_RW_REG_DATA);
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_write_nvm_spi - Write to EEPROM using SPI
+ *  @hw: pointer to the HW structure
+ *  @offset: offset within the EEPROM to be written to
+ *  @words: number of words to write
+ *  @data: 16 bit word(s) to be written to the EEPROM
+ *
+ *  Writes data to EEPROM at offset using SPI interface.
+ *
+ *  If e1000_update_nvm_checksum is not called after this function , the
+ *  EEPROM will most likley contain an invalid checksum.
+ **/
+s32 igb_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	s32 ret_val;
+	u16 widx = 0;
+
+	/*
+	 * A check for invalid values:  offset too large, too many words,
+	 * and not enough words.
+	 */
+	if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
+	    (words == 0)) {
+		hw_dbg("nvm parameter(s) out of bounds\n");
+		ret_val = -E1000_ERR_NVM;
+		goto out;
+	}
+
+	ret_val = hw->nvm.ops.acquire(hw);
+	if (ret_val)
+		goto out;
+
+	msleep(10);
+
+	while (widx < words) {
+		u8 write_opcode = NVM_WRITE_OPCODE_SPI;
+
+		ret_val = igb_ready_nvm_eeprom(hw);
+		if (ret_val)
+			goto release;
+
+		igb_standby_nvm(hw);
+
+		/* Send the WRITE ENABLE command (8 bit opcode) */
+		igb_shift_out_eec_bits(hw, NVM_WREN_OPCODE_SPI,
+					 nvm->opcode_bits);
+
+		igb_standby_nvm(hw);
+
+		/*
+		 * Some SPI eeproms use the 8th address bit embedded in the
+		 * opcode
+		 */
+		if ((nvm->address_bits == 8) && (offset >= 128))
+			write_opcode |= NVM_A8_OPCODE_SPI;
+
+		/* Send the Write command (8-bit opcode + addr) */
+		igb_shift_out_eec_bits(hw, write_opcode, nvm->opcode_bits);
+		igb_shift_out_eec_bits(hw, (u16)((offset + widx) * 2),
+					 nvm->address_bits);
+
+		/* Loop to allow for up to whole page write of eeprom */
+		while (widx < words) {
+			u16 word_out = data[widx];
+			word_out = (word_out >> 8) | (word_out << 8);
+			igb_shift_out_eec_bits(hw, word_out, 16);
+			widx++;
+
+			if ((((offset + widx) * 2) % nvm->page_size) == 0) {
+				igb_standby_nvm(hw);
+				break;
+			}
+		}
+	}
+
+	msleep(10);
+release:
+	hw->nvm.ops.release(hw);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_read_part_string - Read device part number
+ *  @hw: pointer to the HW structure
+ *  @part_num: pointer to device part number
+ *  @part_num_size: size of part number buffer
+ *
+ *  Reads the product board assembly (PBA) number from the EEPROM and stores
+ *  the value in part_num.
+ **/
+s32 igb_read_part_string(struct e1000_hw *hw, u8 *part_num, u32 part_num_size)
+{
+	s32 ret_val;
+	u16 nvm_data;
+	u16 pointer;
+	u16 offset;
+	u16 length;
+
+	if (part_num == NULL) {
+		hw_dbg("PBA string buffer was null\n");
+		ret_val = E1000_ERR_INVALID_ARGUMENT;
+		goto out;
+	}
+
+	ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_0, 1, &nvm_data);
+	if (ret_val) {
+		hw_dbg("NVM Read Error\n");
+		goto out;
+	}
+
+	ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_1, 1, &pointer);
+	if (ret_val) {
+		hw_dbg("NVM Read Error\n");
+		goto out;
+	}
+
+	/*
+	 * if nvm_data is not ptr guard the PBA must be in legacy format which
+	 * means pointer is actually our second data word for the PBA number
+	 * and we can decode it into an ascii string
+	 */
+	if (nvm_data != NVM_PBA_PTR_GUARD) {
+		hw_dbg("NVM PBA number is not stored as string\n");
+
+		/* we will need 11 characters to store the PBA */
+		if (part_num_size < 11) {
+			hw_dbg("PBA string buffer too small\n");
+			return E1000_ERR_NO_SPACE;
+		}
+
+		/* extract hex string from data and pointer */
+		part_num[0] = (nvm_data >> 12) & 0xF;
+		part_num[1] = (nvm_data >> 8) & 0xF;
+		part_num[2] = (nvm_data >> 4) & 0xF;
+		part_num[3] = nvm_data & 0xF;
+		part_num[4] = (pointer >> 12) & 0xF;
+		part_num[5] = (pointer >> 8) & 0xF;
+		part_num[6] = '-';
+		part_num[7] = 0;
+		part_num[8] = (pointer >> 4) & 0xF;
+		part_num[9] = pointer & 0xF;
+
+		/* put a null character on the end of our string */
+		part_num[10] = '\0';
+
+		/* switch all the data but the '-' to hex char */
+		for (offset = 0; offset < 10; offset++) {
+			if (part_num[offset] < 0xA)
+				part_num[offset] += '0';
+			else if (part_num[offset] < 0x10)
+				part_num[offset] += 'A' - 0xA;
+		}
+
+		goto out;
+	}
+
+	ret_val = hw->nvm.ops.read(hw, pointer, 1, &length);
+	if (ret_val) {
+		hw_dbg("NVM Read Error\n");
+		goto out;
+	}
+
+	if (length == 0xFFFF || length == 0) {
+		hw_dbg("NVM PBA number section invalid length\n");
+		ret_val = E1000_ERR_NVM_PBA_SECTION;
+		goto out;
+	}
+	/* check if part_num buffer is big enough */
+	if (part_num_size < (((u32)length * 2) - 1)) {
+		hw_dbg("PBA string buffer too small\n");
+		ret_val = E1000_ERR_NO_SPACE;
+		goto out;
+	}
+
+	/* trim pba length from start of string */
+	pointer++;
+	length--;
+
+	for (offset = 0; offset < length; offset++) {
+		ret_val = hw->nvm.ops.read(hw, pointer + offset, 1, &nvm_data);
+		if (ret_val) {
+			hw_dbg("NVM Read Error\n");
+			goto out;
+		}
+		part_num[offset * 2] = (u8)(nvm_data >> 8);
+		part_num[(offset * 2) + 1] = (u8)(nvm_data & 0xFF);
+	}
+	part_num[offset * 2] = '\0';
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_read_mac_addr - Read device MAC address
+ *  @hw: pointer to the HW structure
+ *
+ *  Reads the device MAC address from the EEPROM and stores the value.
+ *  Since devices with two ports use the same EEPROM, we increment the
+ *  last bit in the MAC address for the second port.
+ **/
+s32 igb_read_mac_addr(struct e1000_hw *hw)
+{
+	u32 rar_high;
+	u32 rar_low;
+	u16 i;
+
+	rar_high = rd32(E1000_RAH(0));
+	rar_low = rd32(E1000_RAL(0));
+
+	for (i = 0; i < E1000_RAL_MAC_ADDR_LEN; i++)
+		hw->mac.perm_addr[i] = (u8)(rar_low >> (i*8));
+
+	for (i = 0; i < E1000_RAH_MAC_ADDR_LEN; i++)
+		hw->mac.perm_addr[i+4] = (u8)(rar_high >> (i*8));
+
+	for (i = 0; i < ETH_ALEN; i++)
+		hw->mac.addr[i] = hw->mac.perm_addr[i];
+
+	return 0;
+}
+
+/**
+ *  igb_validate_nvm_checksum - Validate EEPROM checksum
+ *  @hw: pointer to the HW structure
+ *
+ *  Calculates the EEPROM checksum by reading/adding each word of the EEPROM
+ *  and then verifies that the sum of the EEPROM is equal to 0xBABA.
+ **/
+s32 igb_validate_nvm_checksum(struct e1000_hw *hw)
+{
+	s32 ret_val = 0;
+	u16 checksum = 0;
+	u16 i, nvm_data;
+
+	for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) {
+		ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
+		if (ret_val) {
+			hw_dbg("NVM Read Error\n");
+			goto out;
+		}
+		checksum += nvm_data;
+	}
+
+	if (checksum != (u16) NVM_SUM) {
+		hw_dbg("NVM Checksum Invalid\n");
+		ret_val = -E1000_ERR_NVM;
+		goto out;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_update_nvm_checksum - Update EEPROM checksum
+ *  @hw: pointer to the HW structure
+ *
+ *  Updates the EEPROM checksum by reading/adding each word of the EEPROM
+ *  up to the checksum.  Then calculates the EEPROM checksum and writes the
+ *  value to the EEPROM.
+ **/
+s32 igb_update_nvm_checksum(struct e1000_hw *hw)
+{
+	s32  ret_val;
+	u16 checksum = 0;
+	u16 i, nvm_data;
+
+	for (i = 0; i < NVM_CHECKSUM_REG; i++) {
+		ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
+		if (ret_val) {
+			hw_dbg("NVM Read Error while updating checksum.\n");
+			goto out;
+		}
+		checksum += nvm_data;
+	}
+	checksum = (u16) NVM_SUM - checksum;
+	ret_val = hw->nvm.ops.write(hw, NVM_CHECKSUM_REG, 1, &checksum);
+	if (ret_val)
+		hw_dbg("NVM Write Error while updating checksum.\n");
+
+out:
+	return ret_val;
+}
+
diff --git a/drivers/net/ethernet/intel/igb/e1000_nvm.h b/drivers/net/ethernet/intel/igb/e1000_nvm.h
new file mode 100644
index 00000000000..a2a7ca9fa73
--- /dev/null
+++ b/drivers/net/ethernet/intel/igb/e1000_nvm.h
@@ -0,0 +1,43 @@
+/*******************************************************************************
+
+  Intel(R) Gigabit Ethernet Linux driver
+  Copyright(c) 2011 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_NVM_H_
+#define _E1000_NVM_H_
+
+s32  igb_acquire_nvm(struct e1000_hw *hw);
+void igb_release_nvm(struct e1000_hw *hw);
+s32  igb_read_mac_addr(struct e1000_hw *hw);
+s32  igb_read_part_num(struct e1000_hw *hw, u32 *part_num);
+s32  igb_read_part_string(struct e1000_hw *hw, u8 *part_num,
+                          u32 part_num_size);
+s32  igb_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+s32  igb_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+s32  igb_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+s32  igb_validate_nvm_checksum(struct e1000_hw *hw);
+s32  igb_update_nvm_checksum(struct e1000_hw *hw);
+
+#endif
diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.c b/drivers/net/ethernet/intel/igb/e1000_phy.c
new file mode 100644
index 00000000000..7edf31efe75
--- /dev/null
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
@@ -0,0 +1,2347 @@
+/*******************************************************************************
+
+  Intel(R) Gigabit Ethernet Linux driver
+  Copyright(c) 2007-2011 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/if_ether.h>
+#include <linux/delay.h>
+
+#include "e1000_mac.h"
+#include "e1000_phy.h"
+
+static s32  igb_phy_setup_autoneg(struct e1000_hw *hw);
+static void igb_phy_force_speed_duplex_setup(struct e1000_hw *hw,
+					       u16 *phy_ctrl);
+static s32  igb_wait_autoneg(struct e1000_hw *hw);
+
+/* Cable length tables */
+static const u16 e1000_m88_cable_length_table[] =
+	{ 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED };
+#define M88E1000_CABLE_LENGTH_TABLE_SIZE \
+                (sizeof(e1000_m88_cable_length_table) / \
+                 sizeof(e1000_m88_cable_length_table[0]))
+
+static const u16 e1000_igp_2_cable_length_table[] =
+    { 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21,
+      0, 0, 0, 3, 6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41,
+      6, 10, 14, 18, 22, 26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61,
+      21, 26, 31, 35, 40, 44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82,
+      40, 45, 51, 56, 61, 66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104,
+      60, 66, 72, 77, 82, 87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121,
+      83, 89, 95, 100, 105, 109, 113, 116, 119, 122, 124,
+      104, 109, 114, 118, 121, 124};
+#define IGP02E1000_CABLE_LENGTH_TABLE_SIZE \
+		(sizeof(e1000_igp_2_cable_length_table) / \
+		 sizeof(e1000_igp_2_cable_length_table[0]))
+
+/**
+ *  igb_check_reset_block - Check if PHY reset is blocked
+ *  @hw: pointer to the HW structure
+ *
+ *  Read the PHY management control register and check whether a PHY reset
+ *  is blocked.  If a reset is not blocked return 0, otherwise
+ *  return E1000_BLK_PHY_RESET (12).
+ **/
+s32 igb_check_reset_block(struct e1000_hw *hw)
+{
+	u32 manc;
+
+	manc = rd32(E1000_MANC);
+
+	return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ?
+	       E1000_BLK_PHY_RESET : 0;
+}
+
+/**
+ *  igb_get_phy_id - Retrieve the PHY ID and revision
+ *  @hw: pointer to the HW structure
+ *
+ *  Reads the PHY registers and stores the PHY ID and possibly the PHY
+ *  revision in the hardware structure.
+ **/
+s32 igb_get_phy_id(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val = 0;
+	u16 phy_id;
+
+	ret_val = phy->ops.read_reg(hw, PHY_ID1, &phy_id);
+	if (ret_val)
+		goto out;
+
+	phy->id = (u32)(phy_id << 16);
+	udelay(20);
+	ret_val = phy->ops.read_reg(hw, PHY_ID2, &phy_id);
+	if (ret_val)
+		goto out;
+
+	phy->id |= (u32)(phy_id & PHY_REVISION_MASK);
+	phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_phy_reset_dsp - Reset PHY DSP
+ *  @hw: pointer to the HW structure
+ *
+ *  Reset the digital signal processor.
+ **/
+static s32 igb_phy_reset_dsp(struct e1000_hw *hw)
+{
+	s32 ret_val = 0;
+
+	if (!(hw->phy.ops.write_reg))
+		goto out;
+
+	ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xC1);
+	if (ret_val)
+		goto out;
+
+	ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, 0);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_read_phy_reg_mdic - Read MDI control register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Reads the MDI control regsiter in the PHY at offset and stores the
+ *  information read to data.
+ **/
+s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	u32 i, mdic = 0;
+	s32 ret_val = 0;
+
+	if (offset > MAX_PHY_REG_ADDRESS) {
+		hw_dbg("PHY Address %d is out of range\n", offset);
+		ret_val = -E1000_ERR_PARAM;
+		goto out;
+	}
+
+	/*
+	 * Set up Op-code, Phy Address, and register offset in the MDI
+	 * Control register.  The MAC will take care of interfacing with the
+	 * PHY to retrieve the desired data.
+	 */
+	mdic = ((offset << E1000_MDIC_REG_SHIFT) |
+		(phy->addr << E1000_MDIC_PHY_SHIFT) |
+		(E1000_MDIC_OP_READ));
+
+	wr32(E1000_MDIC, mdic);
+
+	/*
+	 * Poll the ready bit to see if the MDI read completed
+	 * Increasing the time out as testing showed failures with
+	 * the lower time out
+	 */
+	for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
+		udelay(50);
+		mdic = rd32(E1000_MDIC);
+		if (mdic & E1000_MDIC_READY)
+			break;
+	}
+	if (!(mdic & E1000_MDIC_READY)) {
+		hw_dbg("MDI Read did not complete\n");
+		ret_val = -E1000_ERR_PHY;
+		goto out;
+	}
+	if (mdic & E1000_MDIC_ERROR) {
+		hw_dbg("MDI Error\n");
+		ret_val = -E1000_ERR_PHY;
+		goto out;
+	}
+	*data = (u16) mdic;
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_write_phy_reg_mdic - Write MDI control register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write to register at offset
+ *
+ *  Writes data to MDI control register in the PHY at offset.
+ **/
+s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	u32 i, mdic = 0;
+	s32 ret_val = 0;
+
+	if (offset > MAX_PHY_REG_ADDRESS) {
+		hw_dbg("PHY Address %d is out of range\n", offset);
+		ret_val = -E1000_ERR_PARAM;
+		goto out;
+	}
+
+	/*
+	 * Set up Op-code, Phy Address, and register offset in the MDI
+	 * Control register.  The MAC will take care of interfacing with the
+	 * PHY to retrieve the desired data.
+	 */
+	mdic = (((u32)data) |
+		(offset << E1000_MDIC_REG_SHIFT) |
+		(phy->addr << E1000_MDIC_PHY_SHIFT) |
+		(E1000_MDIC_OP_WRITE));
+
+	wr32(E1000_MDIC, mdic);
+
+	/*
+	 * Poll the ready bit to see if the MDI read completed
+	 * Increasing the time out as testing showed failures with
+	 * the lower time out
+	 */
+	for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
+		udelay(50);
+		mdic = rd32(E1000_MDIC);
+		if (mdic & E1000_MDIC_READY)
+			break;
+	}
+	if (!(mdic & E1000_MDIC_READY)) {
+		hw_dbg("MDI Write did not complete\n");
+		ret_val = -E1000_ERR_PHY;
+		goto out;
+	}
+	if (mdic & E1000_MDIC_ERROR) {
+		hw_dbg("MDI Error\n");
+		ret_val = -E1000_ERR_PHY;
+		goto out;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_read_phy_reg_i2c - Read PHY register using i2c
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Reads the PHY register at offset using the i2c interface and stores the
+ *  retrieved information in data.
+ **/
+s32 igb_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	u32 i, i2ccmd = 0;
+
+
+	/*
+	 * Set up Op-code, Phy Address, and register address in the I2CCMD
+	 * register.  The MAC will take care of interfacing with the
+	 * PHY to retrieve the desired data.
+	 */
+	i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) |
+	          (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) |
+	          (E1000_I2CCMD_OPCODE_READ));
+
+	wr32(E1000_I2CCMD, i2ccmd);
+
+	/* Poll the ready bit to see if the I2C read completed */
+	for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) {
+		udelay(50);
+		i2ccmd = rd32(E1000_I2CCMD);
+		if (i2ccmd & E1000_I2CCMD_READY)
+			break;
+	}
+	if (!(i2ccmd & E1000_I2CCMD_READY)) {
+		hw_dbg("I2CCMD Read did not complete\n");
+		return -E1000_ERR_PHY;
+	}
+	if (i2ccmd & E1000_I2CCMD_ERROR) {
+		hw_dbg("I2CCMD Error bit set\n");
+		return -E1000_ERR_PHY;
+	}
+
+	/* Need to byte-swap the 16-bit value. */
+	*data = ((i2ccmd >> 8) & 0x00FF) | ((i2ccmd << 8) & 0xFF00);
+
+	return 0;
+}
+
+/**
+ *  igb_write_phy_reg_i2c - Write PHY register using i2c
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Writes the data to PHY register at the offset using the i2c interface.
+ **/
+s32 igb_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	u32 i, i2ccmd = 0;
+	u16 phy_data_swapped;
+
+	/* Prevent overwritting SFP I2C EEPROM which is at A0 address.*/
+	if ((hw->phy.addr == 0) || (hw->phy.addr > 7)) {
+		hw_dbg("PHY I2C Address %d is out of range.\n",
+			  hw->phy.addr);
+		return -E1000_ERR_CONFIG;
+	}
+
+	/* Swap the data bytes for the I2C interface */
+	phy_data_swapped = ((data >> 8) & 0x00FF) | ((data << 8) & 0xFF00);
+
+	/*
+	 * Set up Op-code, Phy Address, and register address in the I2CCMD
+	 * register.  The MAC will take care of interfacing with the
+	 * PHY to retrieve the desired data.
+	 */
+	i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) |
+	          (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) |
+	          E1000_I2CCMD_OPCODE_WRITE |
+	          phy_data_swapped);
+
+	wr32(E1000_I2CCMD, i2ccmd);
+
+	/* Poll the ready bit to see if the I2C read completed */
+	for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) {
+		udelay(50);
+		i2ccmd = rd32(E1000_I2CCMD);
+		if (i2ccmd & E1000_I2CCMD_READY)
+			break;
+	}
+	if (!(i2ccmd & E1000_I2CCMD_READY)) {
+		hw_dbg("I2CCMD Write did not complete\n");
+		return -E1000_ERR_PHY;
+	}
+	if (i2ccmd & E1000_I2CCMD_ERROR) {
+		hw_dbg("I2CCMD Error bit set\n");
+		return -E1000_ERR_PHY;
+	}
+
+	return 0;
+}
+
+/**
+ *  igb_read_phy_reg_igp - Read igp PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Acquires semaphore, if necessary, then reads the PHY register at offset
+ *  and storing the retrieved information in data.  Release any acquired
+ *  semaphores before exiting.
+ **/
+s32 igb_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+	s32 ret_val = 0;
+
+	if (!(hw->phy.ops.acquire))
+		goto out;
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		goto out;
+
+	if (offset > MAX_PHY_MULTI_PAGE_REG) {
+		ret_val = igb_write_phy_reg_mdic(hw,
+						   IGP01E1000_PHY_PAGE_SELECT,
+						   (u16)offset);
+		if (ret_val) {
+			hw->phy.ops.release(hw);
+			goto out;
+		}
+	}
+
+	ret_val = igb_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+					data);
+
+	hw->phy.ops.release(hw);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_write_phy_reg_igp - Write igp PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Acquires semaphore, if necessary, then writes the data to PHY register
+ *  at the offset.  Release any acquired semaphores before exiting.
+ **/
+s32 igb_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data)
+{
+	s32 ret_val = 0;
+
+	if (!(hw->phy.ops.acquire))
+		goto out;
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		goto out;
+
+	if (offset > MAX_PHY_MULTI_PAGE_REG) {
+		ret_val = igb_write_phy_reg_mdic(hw,
+						   IGP01E1000_PHY_PAGE_SELECT,
+						   (u16)offset);
+		if (ret_val) {
+			hw->phy.ops.release(hw);
+			goto out;
+		}
+	}
+
+	ret_val = igb_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+					   data);
+
+	hw->phy.ops.release(hw);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_copper_link_setup_82580 - Setup 82580 PHY for copper link
+ *  @hw: pointer to the HW structure
+ *
+ *  Sets up Carrier-sense on Transmit and downshift values.
+ **/
+s32 igb_copper_link_setup_82580(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data;
+
+
+	if (phy->reset_disable) {
+		ret_val = 0;
+		goto out;
+	}
+
+	if (phy->type == e1000_phy_82580) {
+		ret_val = hw->phy.ops.reset(hw);
+		if (ret_val) {
+			hw_dbg("Error resetting the PHY.\n");
+			goto out;
+		}
+	}
+
+	/* Enable CRS on TX. This must be set for half-duplex operation. */
+	ret_val = phy->ops.read_reg(hw, I82580_CFG_REG, &phy_data);
+	if (ret_val)
+		goto out;
+
+	phy_data |= I82580_CFG_ASSERT_CRS_ON_TX;
+
+	/* Enable downshift */
+	phy_data |= I82580_CFG_ENABLE_DOWNSHIFT;
+
+	ret_val = phy->ops.write_reg(hw, I82580_CFG_REG, phy_data);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_copper_link_setup_m88 - Setup m88 PHY's for copper link
+ *  @hw: pointer to the HW structure
+ *
+ *  Sets up MDI/MDI-X and polarity for m88 PHY's.  If necessary, transmit clock
+ *  and downshift values are set also.
+ **/
+s32 igb_copper_link_setup_m88(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data;
+
+	if (phy->reset_disable) {
+		ret_val = 0;
+		goto out;
+	}
+
+	/* Enable CRS on TX. This must be set for half-duplex operation. */
+	ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+	if (ret_val)
+		goto out;
+
+	phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
+
+	/*
+	 * Options:
+	 *   MDI/MDI-X = 0 (default)
+	 *   0 - Auto for all speeds
+	 *   1 - MDI mode
+	 *   2 - MDI-X mode
+	 *   3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
+	 */
+	phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
+
+	switch (phy->mdix) {
+	case 1:
+		phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE;
+		break;
+	case 2:
+		phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE;
+		break;
+	case 3:
+		phy_data |= M88E1000_PSCR_AUTO_X_1000T;
+		break;
+	case 0:
+	default:
+		phy_data |= M88E1000_PSCR_AUTO_X_MODE;
+		break;
+	}
+
+	/*
+	 * Options:
+	 *   disable_polarity_correction = 0 (default)
+	 *       Automatic Correction for Reversed Cable Polarity
+	 *   0 - Disabled
+	 *   1 - Enabled
+	 */
+	phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
+	if (phy->disable_polarity_correction == 1)
+		phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
+
+	ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+	if (ret_val)
+		goto out;
+
+	if (phy->revision < E1000_REVISION_4) {
+		/*
+		 * Force TX_CLK in the Extended PHY Specific Control Register
+		 * to 25MHz clock.
+		 */
+		ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+					     &phy_data);
+		if (ret_val)
+			goto out;
+
+		phy_data |= M88E1000_EPSCR_TX_CLK_25;
+
+		if ((phy->revision == E1000_REVISION_2) &&
+		    (phy->id == M88E1111_I_PHY_ID)) {
+			/* 82573L PHY - set the downshift counter to 5x. */
+			phy_data &= ~M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK;
+			phy_data |= M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X;
+		} else {
+			/* Configure Master and Slave downshift values */
+			phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK |
+				      M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK);
+			phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X |
+				     M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X);
+		}
+		ret_val = phy->ops.write_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+					     phy_data);
+		if (ret_val)
+			goto out;
+	}
+
+	/* Commit the changes. */
+	ret_val = igb_phy_sw_reset(hw);
+	if (ret_val) {
+		hw_dbg("Error committing the PHY changes\n");
+		goto out;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_copper_link_setup_m88_gen2 - Setup m88 PHY's for copper link
+ *  @hw: pointer to the HW structure
+ *
+ *  Sets up MDI/MDI-X and polarity for i347-AT4, m88e1322 and m88e1112 PHY's.
+ *  Also enables and sets the downshift parameters.
+ **/
+s32 igb_copper_link_setup_m88_gen2(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data;
+
+	if (phy->reset_disable) {
+		ret_val = 0;
+		goto out;
+	}
+
+	/* Enable CRS on Tx. This must be set for half-duplex operation. */
+	ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+	if (ret_val)
+		goto out;
+
+	/*
+	 * Options:
+	 *   MDI/MDI-X = 0 (default)
+	 *   0 - Auto for all speeds
+	 *   1 - MDI mode
+	 *   2 - MDI-X mode
+	 *   3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
+	 */
+	phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
+
+	switch (phy->mdix) {
+	case 1:
+		phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE;
+		break;
+	case 2:
+		phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE;
+		break;
+	case 3:
+		/* M88E1112 does not support this mode) */
+		if (phy->id != M88E1112_E_PHY_ID) {
+			phy_data |= M88E1000_PSCR_AUTO_X_1000T;
+			break;
+		}
+	case 0:
+	default:
+		phy_data |= M88E1000_PSCR_AUTO_X_MODE;
+		break;
+	}
+
+	/*
+	 * Options:
+	 *   disable_polarity_correction = 0 (default)
+	 *       Automatic Correction for Reversed Cable Polarity
+	 *   0 - Disabled
+	 *   1 - Enabled
+	 */
+	phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
+	if (phy->disable_polarity_correction == 1)
+		phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
+
+	/* Enable downshift and setting it to X6 */
+	phy_data &= ~I347AT4_PSCR_DOWNSHIFT_MASK;
+	phy_data |= I347AT4_PSCR_DOWNSHIFT_6X;
+	phy_data |= I347AT4_PSCR_DOWNSHIFT_ENABLE;
+
+	ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+	if (ret_val)
+		goto out;
+
+	/* Commit the changes. */
+	ret_val = igb_phy_sw_reset(hw);
+	if (ret_val) {
+		hw_dbg("Error committing the PHY changes\n");
+		goto out;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_copper_link_setup_igp - Setup igp PHY's for copper link
+ *  @hw: pointer to the HW structure
+ *
+ *  Sets up LPLU, MDI/MDI-X, polarity, Smartspeed and Master/Slave config for
+ *  igp PHY's.
+ **/
+s32 igb_copper_link_setup_igp(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+
+	if (phy->reset_disable) {
+		ret_val = 0;
+		goto out;
+	}
+
+	ret_val = phy->ops.reset(hw);
+	if (ret_val) {
+		hw_dbg("Error resetting the PHY.\n");
+		goto out;
+	}
+
+	/*
+	 * Wait 100ms for MAC to configure PHY from NVM settings, to avoid
+	 * timeout issues when LFS is enabled.
+	 */
+	msleep(100);
+
+	/*
+	 * The NVM settings will configure LPLU in D3 for
+	 * non-IGP1 PHYs.
+	 */
+	if (phy->type == e1000_phy_igp) {
+		/* disable lplu d3 during driver init */
+		if (phy->ops.set_d3_lplu_state)
+			ret_val = phy->ops.set_d3_lplu_state(hw, false);
+		if (ret_val) {
+			hw_dbg("Error Disabling LPLU D3\n");
+			goto out;
+		}
+	}
+
+	/* disable lplu d0 during driver init */
+	ret_val = phy->ops.set_d0_lplu_state(hw, false);
+	if (ret_val) {
+		hw_dbg("Error Disabling LPLU D0\n");
+		goto out;
+	}
+	/* Configure mdi-mdix settings */
+	ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CTRL, &data);
+	if (ret_val)
+		goto out;
+
+	data &= ~IGP01E1000_PSCR_AUTO_MDIX;
+
+	switch (phy->mdix) {
+	case 1:
+		data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
+		break;
+	case 2:
+		data |= IGP01E1000_PSCR_FORCE_MDI_MDIX;
+		break;
+	case 0:
+	default:
+		data |= IGP01E1000_PSCR_AUTO_MDIX;
+		break;
+	}
+	ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CTRL, data);
+	if (ret_val)
+		goto out;
+
+	/* set auto-master slave resolution settings */
+	if (hw->mac.autoneg) {
+		/*
+		 * when autonegotiation advertisement is only 1000Mbps then we
+		 * should disable SmartSpeed and enable Auto MasterSlave
+		 * resolution as hardware default.
+		 */
+		if (phy->autoneg_advertised == ADVERTISE_1000_FULL) {
+			/* Disable SmartSpeed */
+			ret_val = phy->ops.read_reg(hw,
+						    IGP01E1000_PHY_PORT_CONFIG,
+						    &data);
+			if (ret_val)
+				goto out;
+
+			data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+			ret_val = phy->ops.write_reg(hw,
+						     IGP01E1000_PHY_PORT_CONFIG,
+						     data);
+			if (ret_val)
+				goto out;
+
+			/* Set auto Master/Slave resolution process */
+			ret_val = phy->ops.read_reg(hw, PHY_1000T_CTRL, &data);
+			if (ret_val)
+				goto out;
+
+			data &= ~CR_1000T_MS_ENABLE;
+			ret_val = phy->ops.write_reg(hw, PHY_1000T_CTRL, data);
+			if (ret_val)
+				goto out;
+		}
+
+		ret_val = phy->ops.read_reg(hw, PHY_1000T_CTRL, &data);
+		if (ret_val)
+			goto out;
+
+		/* load defaults for future use */
+		phy->original_ms_type = (data & CR_1000T_MS_ENABLE) ?
+			((data & CR_1000T_MS_VALUE) ?
+			e1000_ms_force_master :
+			e1000_ms_force_slave) :
+			e1000_ms_auto;
+
+		switch (phy->ms_type) {
+		case e1000_ms_force_master:
+			data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE);
+			break;
+		case e1000_ms_force_slave:
+			data |= CR_1000T_MS_ENABLE;
+			data &= ~(CR_1000T_MS_VALUE);
+			break;
+		case e1000_ms_auto:
+			data &= ~CR_1000T_MS_ENABLE;
+		default:
+			break;
+		}
+		ret_val = phy->ops.write_reg(hw, PHY_1000T_CTRL, data);
+		if (ret_val)
+			goto out;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_copper_link_autoneg - Setup/Enable autoneg for copper link
+ *  @hw: pointer to the HW structure
+ *
+ *  Performs initial bounds checking on autoneg advertisement parameter, then
+ *  configure to advertise the full capability.  Setup the PHY to autoneg
+ *  and restart the negotiation process between the link partner.  If
+ *  autoneg_wait_to_complete, then wait for autoneg to complete before exiting.
+ **/
+static s32 igb_copper_link_autoneg(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_ctrl;
+
+	/*
+	 * Perform some bounds checking on the autoneg advertisement
+	 * parameter.
+	 */
+	phy->autoneg_advertised &= phy->autoneg_mask;
+
+	/*
+	 * If autoneg_advertised is zero, we assume it was not defaulted
+	 * by the calling code so we set to advertise full capability.
+	 */
+	if (phy->autoneg_advertised == 0)
+		phy->autoneg_advertised = phy->autoneg_mask;
+
+	hw_dbg("Reconfiguring auto-neg advertisement params\n");
+	ret_val = igb_phy_setup_autoneg(hw);
+	if (ret_val) {
+		hw_dbg("Error Setting up Auto-Negotiation\n");
+		goto out;
+	}
+	hw_dbg("Restarting Auto-Neg\n");
+
+	/*
+	 * Restart auto-negotiation by setting the Auto Neg Enable bit and
+	 * the Auto Neg Restart bit in the PHY control register.
+	 */
+	ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_ctrl);
+	if (ret_val)
+		goto out;
+
+	phy_ctrl |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG);
+	ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_ctrl);
+	if (ret_val)
+		goto out;
+
+	/*
+	 * Does the user want to wait for Auto-Neg to complete here, or
+	 * check at a later time (for example, callback routine).
+	 */
+	if (phy->autoneg_wait_to_complete) {
+		ret_val = igb_wait_autoneg(hw);
+		if (ret_val) {
+			hw_dbg("Error while waiting for "
+			       "autoneg to complete\n");
+			goto out;
+		}
+	}
+
+	hw->mac.get_link_status = true;
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_phy_setup_autoneg - Configure PHY for auto-negotiation
+ *  @hw: pointer to the HW structure
+ *
+ *  Reads the MII auto-neg advertisement register and/or the 1000T control
+ *  register and if the PHY is already setup for auto-negotiation, then
+ *  return successful.  Otherwise, setup advertisement and flow control to
+ *  the appropriate values for the wanted auto-negotiation.
+ **/
+static s32 igb_phy_setup_autoneg(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 mii_autoneg_adv_reg;
+	u16 mii_1000t_ctrl_reg = 0;
+
+	phy->autoneg_advertised &= phy->autoneg_mask;
+
+	/* Read the MII Auto-Neg Advertisement Register (Address 4). */
+	ret_val = phy->ops.read_reg(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg);
+	if (ret_val)
+		goto out;
+
+	if (phy->autoneg_mask & ADVERTISE_1000_FULL) {
+		/* Read the MII 1000Base-T Control Register (Address 9). */
+		ret_val = phy->ops.read_reg(hw, PHY_1000T_CTRL,
+					    &mii_1000t_ctrl_reg);
+		if (ret_val)
+			goto out;
+	}
+
+	/*
+	 * Need to parse both autoneg_advertised and fc and set up
+	 * the appropriate PHY registers.  First we will parse for
+	 * autoneg_advertised software override.  Since we can advertise
+	 * a plethora of combinations, we need to check each bit
+	 * individually.
+	 */
+
+	/*
+	 * First we clear all the 10/100 mb speed bits in the Auto-Neg
+	 * Advertisement Register (Address 4) and the 1000 mb speed bits in
+	 * the  1000Base-T Control Register (Address 9).
+	 */
+	mii_autoneg_adv_reg &= ~(NWAY_AR_100TX_FD_CAPS |
+				 NWAY_AR_100TX_HD_CAPS |
+				 NWAY_AR_10T_FD_CAPS   |
+				 NWAY_AR_10T_HD_CAPS);
+	mii_1000t_ctrl_reg &= ~(CR_1000T_HD_CAPS | CR_1000T_FD_CAPS);
+
+	hw_dbg("autoneg_advertised %x\n", phy->autoneg_advertised);
+
+	/* Do we want to advertise 10 Mb Half Duplex? */
+	if (phy->autoneg_advertised & ADVERTISE_10_HALF) {
+		hw_dbg("Advertise 10mb Half duplex\n");
+		mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS;
+	}
+
+	/* Do we want to advertise 10 Mb Full Duplex? */
+	if (phy->autoneg_advertised & ADVERTISE_10_FULL) {
+		hw_dbg("Advertise 10mb Full duplex\n");
+		mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS;
+	}
+
+	/* Do we want to advertise 100 Mb Half Duplex? */
+	if (phy->autoneg_advertised & ADVERTISE_100_HALF) {
+		hw_dbg("Advertise 100mb Half duplex\n");
+		mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS;
+	}
+
+	/* Do we want to advertise 100 Mb Full Duplex? */
+	if (phy->autoneg_advertised & ADVERTISE_100_FULL) {
+		hw_dbg("Advertise 100mb Full duplex\n");
+		mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS;
+	}
+
+	/* We do not allow the Phy to advertise 1000 Mb Half Duplex */
+	if (phy->autoneg_advertised & ADVERTISE_1000_HALF)
+		hw_dbg("Advertise 1000mb Half duplex request denied!\n");
+
+	/* Do we want to advertise 1000 Mb Full Duplex? */
+	if (phy->autoneg_advertised & ADVERTISE_1000_FULL) {
+		hw_dbg("Advertise 1000mb Full duplex\n");
+		mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS;
+	}
+
+	/*
+	 * Check for a software override of the flow control settings, and
+	 * setup the PHY advertisement registers accordingly.  If
+	 * auto-negotiation is enabled, then software will have to set the
+	 * "PAUSE" bits to the correct value in the Auto-Negotiation
+	 * Advertisement Register (PHY_AUTONEG_ADV) and re-start auto-
+	 * negotiation.
+	 *
+	 * The possible values of the "fc" parameter are:
+	 *      0:  Flow control is completely disabled
+	 *      1:  Rx flow control is enabled (we can receive pause frames
+	 *          but not send pause frames).
+	 *      2:  Tx flow control is enabled (we can send pause frames
+	 *          but we do not support receiving pause frames).
+	 *      3:  Both Rx and TX flow control (symmetric) are enabled.
+	 *  other:  No software override.  The flow control configuration
+	 *          in the EEPROM is used.
+	 */
+	switch (hw->fc.current_mode) {
+	case e1000_fc_none:
+		/*
+		 * Flow control (RX & TX) is completely disabled by a
+		 * software over-ride.
+		 */
+		mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+		break;
+	case e1000_fc_rx_pause:
+		/*
+		 * RX Flow control is enabled, and TX Flow control is
+		 * disabled, by a software over-ride.
+		 *
+		 * Since there really isn't a way to advertise that we are
+		 * capable of RX Pause ONLY, we will advertise that we
+		 * support both symmetric and asymmetric RX PAUSE.  Later
+		 * (in e1000_config_fc_after_link_up) we will disable the
+		 * hw's ability to send PAUSE frames.
+		 */
+		mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+		break;
+	case e1000_fc_tx_pause:
+		/*
+		 * TX Flow control is enabled, and RX Flow control is
+		 * disabled, by a software over-ride.
+		 */
+		mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR;
+		mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE;
+		break;
+	case e1000_fc_full:
+		/*
+		 * Flow control (both RX and TX) is enabled by a software
+		 * over-ride.
+		 */
+		mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+		break;
+	default:
+		hw_dbg("Flow control param set incorrectly\n");
+		ret_val = -E1000_ERR_CONFIG;
+		goto out;
+	}
+
+	ret_val = phy->ops.write_reg(hw, PHY_AUTONEG_ADV, mii_autoneg_adv_reg);
+	if (ret_val)
+		goto out;
+
+	hw_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
+
+	if (phy->autoneg_mask & ADVERTISE_1000_FULL) {
+		ret_val = phy->ops.write_reg(hw,
+					     PHY_1000T_CTRL,
+					     mii_1000t_ctrl_reg);
+		if (ret_val)
+			goto out;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_setup_copper_link - Configure copper link settings
+ *  @hw: pointer to the HW structure
+ *
+ *  Calls the appropriate function to configure the link for auto-neg or forced
+ *  speed and duplex.  Then we check for link, once link is established calls
+ *  to configure collision distance and flow control are called.  If link is
+ *  not established, we return -E1000_ERR_PHY (-2).
+ **/
+s32 igb_setup_copper_link(struct e1000_hw *hw)
+{
+	s32 ret_val;
+	bool link;
+
+
+	if (hw->mac.autoneg) {
+		/*
+		 * Setup autoneg and flow control advertisement and perform
+		 * autonegotiation.
+		 */
+		ret_val = igb_copper_link_autoneg(hw);
+		if (ret_val)
+			goto out;
+	} else {
+		/*
+		 * PHY will be set to 10H, 10F, 100H or 100F
+		 * depending on user settings.
+		 */
+		hw_dbg("Forcing Speed and Duplex\n");
+		ret_val = hw->phy.ops.force_speed_duplex(hw);
+		if (ret_val) {
+			hw_dbg("Error Forcing Speed and Duplex\n");
+			goto out;
+		}
+	}
+
+	/*
+	 * Check link status. Wait up to 100 microseconds for link to become
+	 * valid.
+	 */
+	ret_val = igb_phy_has_link(hw,
+	                           COPPER_LINK_UP_LIMIT,
+	                           10,
+	                           &link);
+	if (ret_val)
+		goto out;
+
+	if (link) {
+		hw_dbg("Valid link established!!!\n");
+		igb_config_collision_dist(hw);
+		ret_val = igb_config_fc_after_link_up(hw);
+	} else {
+		hw_dbg("Unable to establish link!!!\n");
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_phy_force_speed_duplex_igp - Force speed/duplex for igp PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  Calls the PHY setup function to force speed and duplex.  Clears the
+ *  auto-crossover to force MDI manually.  Waits for link and returns
+ *  successful if link up is successful, else -E1000_ERR_PHY (-2).
+ **/
+s32 igb_phy_force_speed_duplex_igp(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data;
+	bool link;
+
+	ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data);
+	if (ret_val)
+		goto out;
+
+	igb_phy_force_speed_duplex_setup(hw, &phy_data);
+
+	ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data);
+	if (ret_val)
+		goto out;
+
+	/*
+	 * Clear Auto-Crossover to force MDI manually.  IGP requires MDI
+	 * forced whenever speed and duplex are forced.
+	 */
+	ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data);
+	if (ret_val)
+		goto out;
+
+	phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX;
+	phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
+
+	ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data);
+	if (ret_val)
+		goto out;
+
+	hw_dbg("IGP PSCR: %X\n", phy_data);
+
+	udelay(1);
+
+	if (phy->autoneg_wait_to_complete) {
+		hw_dbg("Waiting for forced speed/duplex link on IGP phy.\n");
+
+		ret_val = igb_phy_has_link(hw,
+						     PHY_FORCE_LIMIT,
+						     100000,
+						     &link);
+		if (ret_val)
+			goto out;
+
+		if (!link)
+			hw_dbg("Link taking longer than expected.\n");
+
+		/* Try once more */
+		ret_val = igb_phy_has_link(hw,
+						     PHY_FORCE_LIMIT,
+						     100000,
+						     &link);
+		if (ret_val)
+			goto out;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_phy_force_speed_duplex_m88 - Force speed/duplex for m88 PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  Calls the PHY setup function to force speed and duplex.  Clears the
+ *  auto-crossover to force MDI manually.  Resets the PHY to commit the
+ *  changes.  If time expires while waiting for link up, we reset the DSP.
+ *  After reset, TX_CLK and CRS on TX must be set.  Return successful upon
+ *  successful completion, else return corresponding error code.
+ **/
+s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data;
+	bool link;
+
+	/*
+	 * Clear Auto-Crossover to force MDI manually.  M88E1000 requires MDI
+	 * forced whenever speed and duplex are forced.
+	 */
+	ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+	if (ret_val)
+		goto out;
+
+	phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
+	ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+	if (ret_val)
+		goto out;
+
+	hw_dbg("M88E1000 PSCR: %X\n", phy_data);
+
+	ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data);
+	if (ret_val)
+		goto out;
+
+	igb_phy_force_speed_duplex_setup(hw, &phy_data);
+
+	ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data);
+	if (ret_val)
+		goto out;
+
+	/* Reset the phy to commit changes. */
+	ret_val = igb_phy_sw_reset(hw);
+	if (ret_val)
+		goto out;
+
+	if (phy->autoneg_wait_to_complete) {
+		hw_dbg("Waiting for forced speed/duplex link on M88 phy.\n");
+
+		ret_val = igb_phy_has_link(hw, PHY_FORCE_LIMIT, 100000, &link);
+		if (ret_val)
+			goto out;
+
+		if (!link) {
+			if (hw->phy.type != e1000_phy_m88 ||
+			    hw->phy.id == I347AT4_E_PHY_ID ||
+			    hw->phy.id == M88E1112_E_PHY_ID) {
+				hw_dbg("Link taking longer than expected.\n");
+			} else {
+
+				/*
+				 * We didn't get link.
+				 * Reset the DSP and cross our fingers.
+				 */
+				ret_val = phy->ops.write_reg(hw,
+							     M88E1000_PHY_PAGE_SELECT,
+							     0x001d);
+				if (ret_val)
+					goto out;
+				ret_val = igb_phy_reset_dsp(hw);
+				if (ret_val)
+					goto out;
+			}
+		}
+
+		/* Try once more */
+		ret_val = igb_phy_has_link(hw, PHY_FORCE_LIMIT,
+					   100000, &link);
+		if (ret_val)
+			goto out;
+	}
+
+	if (hw->phy.type != e1000_phy_m88 ||
+	    hw->phy.id == I347AT4_E_PHY_ID ||
+	    hw->phy.id == M88E1112_E_PHY_ID)
+		goto out;
+
+	ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
+	if (ret_val)
+		goto out;
+
+	/*
+	 * Resetting the phy means we need to re-force TX_CLK in the
+	 * Extended PHY Specific Control Register to 25MHz clock from
+	 * the reset value of 2.5MHz.
+	 */
+	phy_data |= M88E1000_EPSCR_TX_CLK_25;
+	ret_val = phy->ops.write_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
+	if (ret_val)
+		goto out;
+
+	/*
+	 * In addition, we must re-enable CRS on Tx for both half and full
+	 * duplex.
+	 */
+	ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+	if (ret_val)
+		goto out;
+
+	phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
+	ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_phy_force_speed_duplex_setup - Configure forced PHY speed/duplex
+ *  @hw: pointer to the HW structure
+ *  @phy_ctrl: pointer to current value of PHY_CONTROL
+ *
+ *  Forces speed and duplex on the PHY by doing the following: disable flow
+ *  control, force speed/duplex on the MAC, disable auto speed detection,
+ *  disable auto-negotiation, configure duplex, configure speed, configure
+ *  the collision distance, write configuration to CTRL register.  The
+ *  caller must write to the PHY_CONTROL register for these settings to
+ *  take affect.
+ **/
+static void igb_phy_force_speed_duplex_setup(struct e1000_hw *hw,
+					       u16 *phy_ctrl)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	u32 ctrl;
+
+	/* Turn off flow control when forcing speed/duplex */
+	hw->fc.current_mode = e1000_fc_none;
+
+	/* Force speed/duplex on the mac */
+	ctrl = rd32(E1000_CTRL);
+	ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+	ctrl &= ~E1000_CTRL_SPD_SEL;
+
+	/* Disable Auto Speed Detection */
+	ctrl &= ~E1000_CTRL_ASDE;
+
+	/* Disable autoneg on the phy */
+	*phy_ctrl &= ~MII_CR_AUTO_NEG_EN;
+
+	/* Forcing Full or Half Duplex? */
+	if (mac->forced_speed_duplex & E1000_ALL_HALF_DUPLEX) {
+		ctrl &= ~E1000_CTRL_FD;
+		*phy_ctrl &= ~MII_CR_FULL_DUPLEX;
+		hw_dbg("Half Duplex\n");
+	} else {
+		ctrl |= E1000_CTRL_FD;
+		*phy_ctrl |= MII_CR_FULL_DUPLEX;
+		hw_dbg("Full Duplex\n");
+	}
+
+	/* Forcing 10mb or 100mb? */
+	if (mac->forced_speed_duplex & E1000_ALL_100_SPEED) {
+		ctrl |= E1000_CTRL_SPD_100;
+		*phy_ctrl |= MII_CR_SPEED_100;
+		*phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10);
+		hw_dbg("Forcing 100mb\n");
+	} else {
+		ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
+		*phy_ctrl |= MII_CR_SPEED_10;
+		*phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100);
+		hw_dbg("Forcing 10mb\n");
+	}
+
+	igb_config_collision_dist(hw);
+
+	wr32(E1000_CTRL, ctrl);
+}
+
+/**
+ *  igb_set_d3_lplu_state - Sets low power link up state for D3
+ *  @hw: pointer to the HW structure
+ *  @active: boolean used to enable/disable lplu
+ *
+ *  Success returns 0, Failure returns 1
+ *
+ *  The low power link up (lplu) state is set to the power management level D3
+ *  and SmartSpeed is disabled when active is true, else clear lplu for D3
+ *  and enable Smartspeed.  LPLU and Smartspeed are mutually exclusive.  LPLU
+ *  is used during Dx states where the power conservation is most important.
+ *  During driver activity, SmartSpeed should be enabled so performance is
+ *  maintained.
+ **/
+s32 igb_set_d3_lplu_state(struct e1000_hw *hw, bool active)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val = 0;
+	u16 data;
+
+	if (!(hw->phy.ops.read_reg))
+		goto out;
+
+	ret_val = phy->ops.read_reg(hw, IGP02E1000_PHY_POWER_MGMT, &data);
+	if (ret_val)
+		goto out;
+
+	if (!active) {
+		data &= ~IGP02E1000_PM_D3_LPLU;
+		ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT,
+					     data);
+		if (ret_val)
+			goto out;
+		/*
+		 * LPLU and SmartSpeed are mutually exclusive.  LPLU is used
+		 * during Dx states where the power conservation is most
+		 * important.  During driver activity we should enable
+		 * SmartSpeed, so performance is maintained.
+		 */
+		if (phy->smart_speed == e1000_smart_speed_on) {
+			ret_val = phy->ops.read_reg(hw,
+						    IGP01E1000_PHY_PORT_CONFIG,
+						    &data);
+			if (ret_val)
+				goto out;
+
+			data |= IGP01E1000_PSCFR_SMART_SPEED;
+			ret_val = phy->ops.write_reg(hw,
+						     IGP01E1000_PHY_PORT_CONFIG,
+						     data);
+			if (ret_val)
+				goto out;
+		} else if (phy->smart_speed == e1000_smart_speed_off) {
+			ret_val = phy->ops.read_reg(hw,
+						     IGP01E1000_PHY_PORT_CONFIG,
+						     &data);
+			if (ret_val)
+				goto out;
+
+			data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+			ret_val = phy->ops.write_reg(hw,
+						     IGP01E1000_PHY_PORT_CONFIG,
+						     data);
+			if (ret_val)
+				goto out;
+		}
+	} else if ((phy->autoneg_advertised == E1000_ALL_SPEED_DUPLEX) ||
+		   (phy->autoneg_advertised == E1000_ALL_NOT_GIG) ||
+		   (phy->autoneg_advertised == E1000_ALL_10_SPEED)) {
+		data |= IGP02E1000_PM_D3_LPLU;
+		ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT,
+					      data);
+		if (ret_val)
+			goto out;
+
+		/* When LPLU is enabled, we should disable SmartSpeed */
+		ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+					     &data);
+		if (ret_val)
+			goto out;
+
+		data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+		ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+					      data);
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_check_downshift - Checks whether a downshift in speed occurred
+ *  @hw: pointer to the HW structure
+ *
+ *  Success returns 0, Failure returns 1
+ *
+ *  A downshift is detected by querying the PHY link health.
+ **/
+s32 igb_check_downshift(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data, offset, mask;
+
+	switch (phy->type) {
+	case e1000_phy_m88:
+	case e1000_phy_gg82563:
+		offset	= M88E1000_PHY_SPEC_STATUS;
+		mask	= M88E1000_PSSR_DOWNSHIFT;
+		break;
+	case e1000_phy_igp_2:
+	case e1000_phy_igp:
+	case e1000_phy_igp_3:
+		offset	= IGP01E1000_PHY_LINK_HEALTH;
+		mask	= IGP01E1000_PLHR_SS_DOWNGRADE;
+		break;
+	default:
+		/* speed downshift not supported */
+		phy->speed_downgraded = false;
+		ret_val = 0;
+		goto out;
+	}
+
+	ret_val = phy->ops.read_reg(hw, offset, &phy_data);
+
+	if (!ret_val)
+		phy->speed_downgraded = (phy_data & mask) ? true : false;
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_check_polarity_m88 - Checks the polarity.
+ *  @hw: pointer to the HW structure
+ *
+ *  Success returns 0, Failure returns -E1000_ERR_PHY (-2)
+ *
+ *  Polarity is determined based on the PHY specific status register.
+ **/
+static s32 igb_check_polarity_m88(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+
+	ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_STATUS, &data);
+
+	if (!ret_val)
+		phy->cable_polarity = (data & M88E1000_PSSR_REV_POLARITY)
+				      ? e1000_rev_polarity_reversed
+				      : e1000_rev_polarity_normal;
+
+	return ret_val;
+}
+
+/**
+ *  igb_check_polarity_igp - Checks the polarity.
+ *  @hw: pointer to the HW structure
+ *
+ *  Success returns 0, Failure returns -E1000_ERR_PHY (-2)
+ *
+ *  Polarity is determined based on the PHY port status register, and the
+ *  current speed (since there is no polarity at 100Mbps).
+ **/
+static s32 igb_check_polarity_igp(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data, offset, mask;
+
+	/*
+	 * Polarity is determined based on the speed of
+	 * our connection.
+	 */
+	ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_STATUS, &data);
+	if (ret_val)
+		goto out;
+
+	if ((data & IGP01E1000_PSSR_SPEED_MASK) ==
+	    IGP01E1000_PSSR_SPEED_1000MBPS) {
+		offset	= IGP01E1000_PHY_PCS_INIT_REG;
+		mask	= IGP01E1000_PHY_POLARITY_MASK;
+	} else {
+		/*
+		 * This really only applies to 10Mbps since
+		 * there is no polarity for 100Mbps (always 0).
+		 */
+		offset	= IGP01E1000_PHY_PORT_STATUS;
+		mask	= IGP01E1000_PSSR_POLARITY_REVERSED;
+	}
+
+	ret_val = phy->ops.read_reg(hw, offset, &data);
+
+	if (!ret_val)
+		phy->cable_polarity = (data & mask)
+				      ? e1000_rev_polarity_reversed
+				      : e1000_rev_polarity_normal;
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_wait_autoneg - Wait for auto-neg compeletion
+ *  @hw: pointer to the HW structure
+ *
+ *  Waits for auto-negotiation to complete or for the auto-negotiation time
+ *  limit to expire, which ever happens first.
+ **/
+static s32 igb_wait_autoneg(struct e1000_hw *hw)
+{
+	s32 ret_val = 0;
+	u16 i, phy_status;
+
+	/* Break after autoneg completes or PHY_AUTO_NEG_LIMIT expires. */
+	for (i = PHY_AUTO_NEG_LIMIT; i > 0; i--) {
+		ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status);
+		if (ret_val)
+			break;
+		ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status);
+		if (ret_val)
+			break;
+		if (phy_status & MII_SR_AUTONEG_COMPLETE)
+			break;
+		msleep(100);
+	}
+
+	/*
+	 * PHY_AUTO_NEG_TIME expiration doesn't guarantee auto-negotiation
+	 * has completed.
+	 */
+	return ret_val;
+}
+
+/**
+ *  igb_phy_has_link - Polls PHY for link
+ *  @hw: pointer to the HW structure
+ *  @iterations: number of times to poll for link
+ *  @usec_interval: delay between polling attempts
+ *  @success: pointer to whether polling was successful or not
+ *
+ *  Polls the PHY status register for link, 'iterations' number of times.
+ **/
+s32 igb_phy_has_link(struct e1000_hw *hw, u32 iterations,
+			       u32 usec_interval, bool *success)
+{
+	s32 ret_val = 0;
+	u16 i, phy_status;
+
+	for (i = 0; i < iterations; i++) {
+		/*
+		 * Some PHYs require the PHY_STATUS register to be read
+		 * twice due to the link bit being sticky.  No harm doing
+		 * it across the board.
+		 */
+		ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status);
+		if (ret_val) {
+			/*
+			 * If the first read fails, another entity may have
+			 * ownership of the resources, wait and try again to
+			 * see if they have relinquished the resources yet.
+			 */
+			udelay(usec_interval);
+		}
+		ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status);
+		if (ret_val)
+			break;
+		if (phy_status & MII_SR_LINK_STATUS)
+			break;
+		if (usec_interval >= 1000)
+			mdelay(usec_interval/1000);
+		else
+			udelay(usec_interval);
+	}
+
+	*success = (i < iterations) ? true : false;
+
+	return ret_val;
+}
+
+/**
+ *  igb_get_cable_length_m88 - Determine cable length for m88 PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  Reads the PHY specific status register to retrieve the cable length
+ *  information.  The cable length is determined by averaging the minimum and
+ *  maximum values to get the "average" cable length.  The m88 PHY has four
+ *  possible cable length values, which are:
+ *	Register Value		Cable Length
+ *	0			< 50 meters
+ *	1			50 - 80 meters
+ *	2			80 - 110 meters
+ *	3			110 - 140 meters
+ *	4			> 140 meters
+ **/
+s32 igb_get_cable_length_m88(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data, index;
+
+	ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
+	if (ret_val)
+		goto out;
+
+	index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
+		M88E1000_PSSR_CABLE_LENGTH_SHIFT;
+	if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) {
+		ret_val = -E1000_ERR_PHY;
+		goto out;
+	}
+
+	phy->min_cable_length = e1000_m88_cable_length_table[index];
+	phy->max_cable_length = e1000_m88_cable_length_table[index + 1];
+
+	phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
+
+out:
+	return ret_val;
+}
+
+s32 igb_get_cable_length_m88_gen2(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data, phy_data2, index, default_page, is_cm;
+
+	switch (hw->phy.id) {
+	case I347AT4_E_PHY_ID:
+		/* Remember the original page select and set it to 7 */
+		ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT,
+					    &default_page);
+		if (ret_val)
+			goto out;
+
+		ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, 0x07);
+		if (ret_val)
+			goto out;
+
+		/* Get cable length from PHY Cable Diagnostics Control Reg */
+		ret_val = phy->ops.read_reg(hw, (I347AT4_PCDL + phy->addr),
+					    &phy_data);
+		if (ret_val)
+			goto out;
+
+		/* Check if the unit of cable length is meters or cm */
+		ret_val = phy->ops.read_reg(hw, I347AT4_PCDC, &phy_data2);
+		if (ret_val)
+			goto out;
+
+		is_cm = !(phy_data & I347AT4_PCDC_CABLE_LENGTH_UNIT);
+
+		/* Populate the phy structure with cable length in meters */
+		phy->min_cable_length = phy_data / (is_cm ? 100 : 1);
+		phy->max_cable_length = phy_data / (is_cm ? 100 : 1);
+		phy->cable_length = phy_data / (is_cm ? 100 : 1);
+
+		/* Reset the page selec to its original value */
+		ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT,
+					     default_page);
+		if (ret_val)
+			goto out;
+		break;
+	case M88E1112_E_PHY_ID:
+		/* Remember the original page select and set it to 5 */
+		ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT,
+					    &default_page);
+		if (ret_val)
+			goto out;
+
+		ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, 0x05);
+		if (ret_val)
+			goto out;
+
+		ret_val = phy->ops.read_reg(hw, M88E1112_VCT_DSP_DISTANCE,
+					    &phy_data);
+		if (ret_val)
+			goto out;
+
+		index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
+			M88E1000_PSSR_CABLE_LENGTH_SHIFT;
+		if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) {
+			ret_val = -E1000_ERR_PHY;
+			goto out;
+		}
+
+		phy->min_cable_length = e1000_m88_cable_length_table[index];
+		phy->max_cable_length = e1000_m88_cable_length_table[index + 1];
+
+		phy->cable_length = (phy->min_cable_length +
+				     phy->max_cable_length) / 2;
+
+		/* Reset the page select to its original value */
+		ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT,
+					     default_page);
+		if (ret_val)
+			goto out;
+
+		break;
+	default:
+		ret_val = -E1000_ERR_PHY;
+		goto out;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_get_cable_length_igp_2 - Determine cable length for igp2 PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  The automatic gain control (agc) normalizes the amplitude of the
+ *  received signal, adjusting for the attenuation produced by the
+ *  cable.  By reading the AGC registers, which represent the
+ *  combination of coarse and fine gain value, the value can be put
+ *  into a lookup table to obtain the approximate cable length
+ *  for each channel.
+ **/
+s32 igb_get_cable_length_igp_2(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val = 0;
+	u16 phy_data, i, agc_value = 0;
+	u16 cur_agc_index, max_agc_index = 0;
+	u16 min_agc_index = IGP02E1000_CABLE_LENGTH_TABLE_SIZE - 1;
+	static const u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = {
+	       IGP02E1000_PHY_AGC_A,
+	       IGP02E1000_PHY_AGC_B,
+	       IGP02E1000_PHY_AGC_C,
+	       IGP02E1000_PHY_AGC_D
+	};
+
+	/* Read the AGC registers for all channels */
+	for (i = 0; i < IGP02E1000_PHY_CHANNEL_NUM; i++) {
+		ret_val = phy->ops.read_reg(hw, agc_reg_array[i], &phy_data);
+		if (ret_val)
+			goto out;
+
+		/*
+		 * Getting bits 15:9, which represent the combination of
+		 * coarse and fine gain values.  The result is a number
+		 * that can be put into the lookup table to obtain the
+		 * approximate cable length.
+		 */
+		cur_agc_index = (phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) &
+				IGP02E1000_AGC_LENGTH_MASK;
+
+		/* Array index bound check. */
+		if ((cur_agc_index >= IGP02E1000_CABLE_LENGTH_TABLE_SIZE) ||
+		    (cur_agc_index == 0)) {
+			ret_val = -E1000_ERR_PHY;
+			goto out;
+		}
+
+		/* Remove min & max AGC values from calculation. */
+		if (e1000_igp_2_cable_length_table[min_agc_index] >
+		    e1000_igp_2_cable_length_table[cur_agc_index])
+			min_agc_index = cur_agc_index;
+		if (e1000_igp_2_cable_length_table[max_agc_index] <
+		    e1000_igp_2_cable_length_table[cur_agc_index])
+			max_agc_index = cur_agc_index;
+
+		agc_value += e1000_igp_2_cable_length_table[cur_agc_index];
+	}
+
+	agc_value -= (e1000_igp_2_cable_length_table[min_agc_index] +
+		      e1000_igp_2_cable_length_table[max_agc_index]);
+	agc_value /= (IGP02E1000_PHY_CHANNEL_NUM - 2);
+
+	/* Calculate cable length with the error range of +/- 10 meters. */
+	phy->min_cable_length = ((agc_value - IGP02E1000_AGC_RANGE) > 0) ?
+				 (agc_value - IGP02E1000_AGC_RANGE) : 0;
+	phy->max_cable_length = agc_value + IGP02E1000_AGC_RANGE;
+
+	phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_get_phy_info_m88 - Retrieve PHY information
+ *  @hw: pointer to the HW structure
+ *
+ *  Valid for only copper links.  Read the PHY status register (sticky read)
+ *  to verify that link is up.  Read the PHY special control register to
+ *  determine the polarity and 10base-T extended distance.  Read the PHY
+ *  special status register to determine MDI/MDIx and current speed.  If
+ *  speed is 1000, then determine cable length, local and remote receiver.
+ **/
+s32 igb_get_phy_info_m88(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32  ret_val;
+	u16 phy_data;
+	bool link;
+
+	if (phy->media_type != e1000_media_type_copper) {
+		hw_dbg("Phy info is only valid for copper media\n");
+		ret_val = -E1000_ERR_CONFIG;
+		goto out;
+	}
+
+	ret_val = igb_phy_has_link(hw, 1, 0, &link);
+	if (ret_val)
+		goto out;
+
+	if (!link) {
+		hw_dbg("Phy info is only valid if link is up\n");
+		ret_val = -E1000_ERR_CONFIG;
+		goto out;
+	}
+
+	ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+	if (ret_val)
+		goto out;
+
+	phy->polarity_correction = (phy_data & M88E1000_PSCR_POLARITY_REVERSAL)
+				   ? true : false;
+
+	ret_val = igb_check_polarity_m88(hw);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
+	if (ret_val)
+		goto out;
+
+	phy->is_mdix = (phy_data & M88E1000_PSSR_MDIX) ? true : false;
+
+	if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) {
+		ret_val = phy->ops.get_cable_length(hw);
+		if (ret_val)
+			goto out;
+
+		ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &phy_data);
+		if (ret_val)
+			goto out;
+
+		phy->local_rx = (phy_data & SR_1000T_LOCAL_RX_STATUS)
+				? e1000_1000t_rx_status_ok
+				: e1000_1000t_rx_status_not_ok;
+
+		phy->remote_rx = (phy_data & SR_1000T_REMOTE_RX_STATUS)
+				 ? e1000_1000t_rx_status_ok
+				 : e1000_1000t_rx_status_not_ok;
+	} else {
+		/* Set values to "undefined" */
+		phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
+		phy->local_rx = e1000_1000t_rx_status_undefined;
+		phy->remote_rx = e1000_1000t_rx_status_undefined;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_get_phy_info_igp - Retrieve igp PHY information
+ *  @hw: pointer to the HW structure
+ *
+ *  Read PHY status to determine if link is up.  If link is up, then
+ *  set/determine 10base-T extended distance and polarity correction.  Read
+ *  PHY port status to determine MDI/MDIx and speed.  Based on the speed,
+ *  determine on the cable length, local and remote receiver.
+ **/
+s32 igb_get_phy_info_igp(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+	bool link;
+
+	ret_val = igb_phy_has_link(hw, 1, 0, &link);
+	if (ret_val)
+		goto out;
+
+	if (!link) {
+		hw_dbg("Phy info is only valid if link is up\n");
+		ret_val = -E1000_ERR_CONFIG;
+		goto out;
+	}
+
+	phy->polarity_correction = true;
+
+	ret_val = igb_check_polarity_igp(hw);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_STATUS, &data);
+	if (ret_val)
+		goto out;
+
+	phy->is_mdix = (data & IGP01E1000_PSSR_MDIX) ? true : false;
+
+	if ((data & IGP01E1000_PSSR_SPEED_MASK) ==
+	    IGP01E1000_PSSR_SPEED_1000MBPS) {
+		ret_val = phy->ops.get_cable_length(hw);
+		if (ret_val)
+			goto out;
+
+		ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &data);
+		if (ret_val)
+			goto out;
+
+		phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS)
+				? e1000_1000t_rx_status_ok
+				: e1000_1000t_rx_status_not_ok;
+
+		phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS)
+				 ? e1000_1000t_rx_status_ok
+				 : e1000_1000t_rx_status_not_ok;
+	} else {
+		phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
+		phy->local_rx = e1000_1000t_rx_status_undefined;
+		phy->remote_rx = e1000_1000t_rx_status_undefined;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_phy_sw_reset - PHY software reset
+ *  @hw: pointer to the HW structure
+ *
+ *  Does a software reset of the PHY by reading the PHY control register and
+ *  setting/write the control register reset bit to the PHY.
+ **/
+s32 igb_phy_sw_reset(struct e1000_hw *hw)
+{
+	s32 ret_val = 0;
+	u16 phy_ctrl;
+
+	if (!(hw->phy.ops.read_reg))
+		goto out;
+
+	ret_val = hw->phy.ops.read_reg(hw, PHY_CONTROL, &phy_ctrl);
+	if (ret_val)
+		goto out;
+
+	phy_ctrl |= MII_CR_RESET;
+	ret_val = hw->phy.ops.write_reg(hw, PHY_CONTROL, phy_ctrl);
+	if (ret_val)
+		goto out;
+
+	udelay(1);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_phy_hw_reset - PHY hardware reset
+ *  @hw: pointer to the HW structure
+ *
+ *  Verify the reset block is not blocking us from resetting.  Acquire
+ *  semaphore (if necessary) and read/set/write the device control reset
+ *  bit in the PHY.  Wait the appropriate delay time for the device to
+ *  reset and relase the semaphore (if necessary).
+ **/
+s32 igb_phy_hw_reset(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32  ret_val;
+	u32 ctrl;
+
+	ret_val = igb_check_reset_block(hw);
+	if (ret_val) {
+		ret_val = 0;
+		goto out;
+	}
+
+	ret_val = phy->ops.acquire(hw);
+	if (ret_val)
+		goto out;
+
+	ctrl = rd32(E1000_CTRL);
+	wr32(E1000_CTRL, ctrl | E1000_CTRL_PHY_RST);
+	wrfl();
+
+	udelay(phy->reset_delay_us);
+
+	wr32(E1000_CTRL, ctrl);
+	wrfl();
+
+	udelay(150);
+
+	phy->ops.release(hw);
+
+	ret_val = phy->ops.get_cfg_done(hw);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_phy_init_script_igp3 - Inits the IGP3 PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  Initializes a Intel Gigabit PHY3 when an EEPROM is not present.
+ **/
+s32 igb_phy_init_script_igp3(struct e1000_hw *hw)
+{
+	hw_dbg("Running IGP 3 PHY init script\n");
+
+	/* PHY init IGP 3 */
+	/* Enable rise/fall, 10-mode work in class-A */
+	hw->phy.ops.write_reg(hw, 0x2F5B, 0x9018);
+	/* Remove all caps from Replica path filter */
+	hw->phy.ops.write_reg(hw, 0x2F52, 0x0000);
+	/* Bias trimming for ADC, AFE and Driver (Default) */
+	hw->phy.ops.write_reg(hw, 0x2FB1, 0x8B24);
+	/* Increase Hybrid poly bias */
+	hw->phy.ops.write_reg(hw, 0x2FB2, 0xF8F0);
+	/* Add 4% to TX amplitude in Giga mode */
+	hw->phy.ops.write_reg(hw, 0x2010, 0x10B0);
+	/* Disable trimming (TTT) */
+	hw->phy.ops.write_reg(hw, 0x2011, 0x0000);
+	/* Poly DC correction to 94.6% + 2% for all channels */
+	hw->phy.ops.write_reg(hw, 0x20DD, 0x249A);
+	/* ABS DC correction to 95.9% */
+	hw->phy.ops.write_reg(hw, 0x20DE, 0x00D3);
+	/* BG temp curve trim */
+	hw->phy.ops.write_reg(hw, 0x28B4, 0x04CE);
+	/* Increasing ADC OPAMP stage 1 currents to max */
+	hw->phy.ops.write_reg(hw, 0x2F70, 0x29E4);
+	/* Force 1000 ( required for enabling PHY regs configuration) */
+	hw->phy.ops.write_reg(hw, 0x0000, 0x0140);
+	/* Set upd_freq to 6 */
+	hw->phy.ops.write_reg(hw, 0x1F30, 0x1606);
+	/* Disable NPDFE */
+	hw->phy.ops.write_reg(hw, 0x1F31, 0xB814);
+	/* Disable adaptive fixed FFE (Default) */
+	hw->phy.ops.write_reg(hw, 0x1F35, 0x002A);
+	/* Enable FFE hysteresis */
+	hw->phy.ops.write_reg(hw, 0x1F3E, 0x0067);
+	/* Fixed FFE for short cable lengths */
+	hw->phy.ops.write_reg(hw, 0x1F54, 0x0065);
+	/* Fixed FFE for medium cable lengths */
+	hw->phy.ops.write_reg(hw, 0x1F55, 0x002A);
+	/* Fixed FFE for long cable lengths */
+	hw->phy.ops.write_reg(hw, 0x1F56, 0x002A);
+	/* Enable Adaptive Clip Threshold */
+	hw->phy.ops.write_reg(hw, 0x1F72, 0x3FB0);
+	/* AHT reset limit to 1 */
+	hw->phy.ops.write_reg(hw, 0x1F76, 0xC0FF);
+	/* Set AHT master delay to 127 msec */
+	hw->phy.ops.write_reg(hw, 0x1F77, 0x1DEC);
+	/* Set scan bits for AHT */
+	hw->phy.ops.write_reg(hw, 0x1F78, 0xF9EF);
+	/* Set AHT Preset bits */
+	hw->phy.ops.write_reg(hw, 0x1F79, 0x0210);
+	/* Change integ_factor of channel A to 3 */
+	hw->phy.ops.write_reg(hw, 0x1895, 0x0003);
+	/* Change prop_factor of channels BCD to 8 */
+	hw->phy.ops.write_reg(hw, 0x1796, 0x0008);
+	/* Change cg_icount + enable integbp for channels BCD */
+	hw->phy.ops.write_reg(hw, 0x1798, 0xD008);
+	/*
+	 * Change cg_icount + enable integbp + change prop_factor_master
+	 * to 8 for channel A
+	 */
+	hw->phy.ops.write_reg(hw, 0x1898, 0xD918);
+	/* Disable AHT in Slave mode on channel A */
+	hw->phy.ops.write_reg(hw, 0x187A, 0x0800);
+	/*
+	 * Enable LPLU and disable AN to 1000 in non-D0a states,
+	 * Enable SPD+B2B
+	 */
+	hw->phy.ops.write_reg(hw, 0x0019, 0x008D);
+	/* Enable restart AN on an1000_dis change */
+	hw->phy.ops.write_reg(hw, 0x001B, 0x2080);
+	/* Enable wh_fifo read clock in 10/100 modes */
+	hw->phy.ops.write_reg(hw, 0x0014, 0x0045);
+	/* Restart AN, Speed selection is 1000 */
+	hw->phy.ops.write_reg(hw, 0x0000, 0x1340);
+
+	return 0;
+}
+
+/**
+ * igb_power_up_phy_copper - Restore copper link in case of PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, restore the link to previous settings.
+ **/
+void igb_power_up_phy_copper(struct e1000_hw *hw)
+{
+	u16 mii_reg = 0;
+
+	/* The PHY will retain its settings across a power down/up cycle */
+	hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg);
+	mii_reg &= ~MII_CR_POWER_DOWN;
+	hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg);
+}
+
+/**
+ * igb_power_down_phy_copper - Power down copper PHY
+ * @hw: pointer to the HW structure
+ *
+ * Power down PHY to save power when interface is down and wake on lan
+ * is not enabled.
+ **/
+void igb_power_down_phy_copper(struct e1000_hw *hw)
+{
+	u16 mii_reg = 0;
+
+	/* The PHY will retain its settings across a power down/up cycle */
+	hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg);
+	mii_reg |= MII_CR_POWER_DOWN;
+	hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg);
+	msleep(1);
+}
+
+/**
+ *  igb_check_polarity_82580 - Checks the polarity.
+ *  @hw: pointer to the HW structure
+ *
+ *  Success returns 0, Failure returns -E1000_ERR_PHY (-2)
+ *
+ *  Polarity is determined based on the PHY specific status register.
+ **/
+static s32 igb_check_polarity_82580(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+
+
+	ret_val = phy->ops.read_reg(hw, I82580_PHY_STATUS_2, &data);
+
+	if (!ret_val)
+		phy->cable_polarity = (data & I82580_PHY_STATUS2_REV_POLARITY)
+		                      ? e1000_rev_polarity_reversed
+		                      : e1000_rev_polarity_normal;
+
+	return ret_val;
+}
+
+/**
+ *  igb_phy_force_speed_duplex_82580 - Force speed/duplex for I82580 PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  Calls the PHY setup function to force speed and duplex.  Clears the
+ *  auto-crossover to force MDI manually.  Waits for link and returns
+ *  successful if link up is successful, else -E1000_ERR_PHY (-2).
+ **/
+s32 igb_phy_force_speed_duplex_82580(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data;
+	bool link;
+
+
+	ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data);
+	if (ret_val)
+		goto out;
+
+	igb_phy_force_speed_duplex_setup(hw, &phy_data);
+
+	ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data);
+	if (ret_val)
+		goto out;
+
+	/*
+	 * Clear Auto-Crossover to force MDI manually.  82580 requires MDI
+	 * forced whenever speed and duplex are forced.
+	 */
+	ret_val = phy->ops.read_reg(hw, I82580_PHY_CTRL_2, &phy_data);
+	if (ret_val)
+		goto out;
+
+	phy_data &= ~I82580_PHY_CTRL2_AUTO_MDIX;
+	phy_data &= ~I82580_PHY_CTRL2_FORCE_MDI_MDIX;
+
+	ret_val = phy->ops.write_reg(hw, I82580_PHY_CTRL_2, phy_data);
+	if (ret_val)
+		goto out;
+
+	hw_dbg("I82580_PHY_CTRL_2: %X\n", phy_data);
+
+	udelay(1);
+
+	if (phy->autoneg_wait_to_complete) {
+		hw_dbg("Waiting for forced speed/duplex link on 82580 phy\n");
+
+		ret_val = igb_phy_has_link(hw,
+		                           PHY_FORCE_LIMIT,
+		                           100000,
+		                           &link);
+		if (ret_val)
+			goto out;
+
+		if (!link)
+			hw_dbg("Link taking longer than expected.\n");
+
+		/* Try once more */
+		ret_val = igb_phy_has_link(hw,
+		                           PHY_FORCE_LIMIT,
+		                           100000,
+		                           &link);
+		if (ret_val)
+			goto out;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_get_phy_info_82580 - Retrieve I82580 PHY information
+ *  @hw: pointer to the HW structure
+ *
+ *  Read PHY status to determine if link is up.  If link is up, then
+ *  set/determine 10base-T extended distance and polarity correction.  Read
+ *  PHY port status to determine MDI/MDIx and speed.  Based on the speed,
+ *  determine on the cable length, local and remote receiver.
+ **/
+s32 igb_get_phy_info_82580(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+	bool link;
+
+
+	ret_val = igb_phy_has_link(hw, 1, 0, &link);
+	if (ret_val)
+		goto out;
+
+	if (!link) {
+		hw_dbg("Phy info is only valid if link is up\n");
+		ret_val = -E1000_ERR_CONFIG;
+		goto out;
+	}
+
+	phy->polarity_correction = true;
+
+	ret_val = igb_check_polarity_82580(hw);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.read_reg(hw, I82580_PHY_STATUS_2, &data);
+	if (ret_val)
+		goto out;
+
+	phy->is_mdix = (data & I82580_PHY_STATUS2_MDIX) ? true : false;
+
+	if ((data & I82580_PHY_STATUS2_SPEED_MASK) ==
+	    I82580_PHY_STATUS2_SPEED_1000MBPS) {
+		ret_val = hw->phy.ops.get_cable_length(hw);
+		if (ret_val)
+			goto out;
+
+		ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &data);
+		if (ret_val)
+			goto out;
+
+		phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS)
+		                ? e1000_1000t_rx_status_ok
+		                : e1000_1000t_rx_status_not_ok;
+
+		phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS)
+		                 ? e1000_1000t_rx_status_ok
+		                 : e1000_1000t_rx_status_not_ok;
+	} else {
+		phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
+		phy->local_rx = e1000_1000t_rx_status_undefined;
+		phy->remote_rx = e1000_1000t_rx_status_undefined;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_get_cable_length_82580 - Determine cable length for 82580 PHY
+ *  @hw: pointer to the HW structure
+ *
+ * Reads the diagnostic status register and verifies result is valid before
+ * placing it in the phy_cable_length field.
+ **/
+s32 igb_get_cable_length_82580(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data, length;
+
+
+	ret_val = phy->ops.read_reg(hw, I82580_PHY_DIAG_STATUS, &phy_data);
+	if (ret_val)
+		goto out;
+
+	length = (phy_data & I82580_DSTATUS_CABLE_LENGTH) >>
+	         I82580_DSTATUS_CABLE_LENGTH_SHIFT;
+
+	if (length == E1000_CABLE_LENGTH_UNDEFINED)
+		ret_val = -E1000_ERR_PHY;
+
+	phy->cable_length = length;
+
+out:
+	return ret_val;
+}
diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.h b/drivers/net/ethernet/intel/igb/e1000_phy.h
new file mode 100644
index 00000000000..8510797b9d8
--- /dev/null
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.h
@@ -0,0 +1,136 @@
+/*******************************************************************************
+
+  Intel(R) Gigabit Ethernet Linux driver
+  Copyright(c) 2007-2011 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_PHY_H_
+#define _E1000_PHY_H_
+
+enum e1000_ms_type {
+	e1000_ms_hw_default = 0,
+	e1000_ms_force_master,
+	e1000_ms_force_slave,
+	e1000_ms_auto
+};
+
+enum e1000_smart_speed {
+	e1000_smart_speed_default = 0,
+	e1000_smart_speed_on,
+	e1000_smart_speed_off
+};
+
+s32  igb_check_downshift(struct e1000_hw *hw);
+s32  igb_check_reset_block(struct e1000_hw *hw);
+s32  igb_copper_link_setup_igp(struct e1000_hw *hw);
+s32  igb_copper_link_setup_m88(struct e1000_hw *hw);
+s32  igb_copper_link_setup_m88_gen2(struct e1000_hw *hw);
+s32  igb_phy_force_speed_duplex_igp(struct e1000_hw *hw);
+s32  igb_phy_force_speed_duplex_m88(struct e1000_hw *hw);
+s32  igb_get_cable_length_m88(struct e1000_hw *hw);
+s32  igb_get_cable_length_m88_gen2(struct e1000_hw *hw);
+s32  igb_get_cable_length_igp_2(struct e1000_hw *hw);
+s32  igb_get_phy_id(struct e1000_hw *hw);
+s32  igb_get_phy_info_igp(struct e1000_hw *hw);
+s32  igb_get_phy_info_m88(struct e1000_hw *hw);
+s32  igb_phy_sw_reset(struct e1000_hw *hw);
+s32  igb_phy_hw_reset(struct e1000_hw *hw);
+s32  igb_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data);
+s32  igb_set_d3_lplu_state(struct e1000_hw *hw, bool active);
+s32  igb_setup_copper_link(struct e1000_hw *hw);
+s32  igb_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data);
+s32  igb_phy_has_link(struct e1000_hw *hw, u32 iterations,
+				u32 usec_interval, bool *success);
+void igb_power_up_phy_copper(struct e1000_hw *hw);
+void igb_power_down_phy_copper(struct e1000_hw *hw);
+s32  igb_phy_init_script_igp3(struct e1000_hw *hw);
+s32  igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data);
+s32  igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
+s32  igb_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data);
+s32  igb_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data);
+s32  igb_copper_link_setup_82580(struct e1000_hw *hw);
+s32  igb_get_phy_info_82580(struct e1000_hw *hw);
+s32  igb_phy_force_speed_duplex_82580(struct e1000_hw *hw);
+s32  igb_get_cable_length_82580(struct e1000_hw *hw);
+
+/* IGP01E1000 Specific Registers */
+#define IGP01E1000_PHY_PORT_CONFIG        0x10 /* Port Config */
+#define IGP01E1000_PHY_PORT_STATUS        0x11 /* Status */
+#define IGP01E1000_PHY_PORT_CTRL          0x12 /* Control */
+#define IGP01E1000_PHY_LINK_HEALTH        0x13 /* PHY Link Health */
+#define IGP02E1000_PHY_POWER_MGMT         0x19 /* Power Management */
+#define IGP01E1000_PHY_PAGE_SELECT        0x1F /* Page Select */
+#define IGP01E1000_PHY_PCS_INIT_REG       0x00B4
+#define IGP01E1000_PHY_POLARITY_MASK      0x0078
+#define IGP01E1000_PSCR_AUTO_MDIX         0x1000
+#define IGP01E1000_PSCR_FORCE_MDI_MDIX    0x2000 /* 0=MDI, 1=MDIX */
+#define IGP01E1000_PSCFR_SMART_SPEED      0x0080
+
+#define I82580_ADDR_REG                   16
+#define I82580_CFG_REG                    22
+#define I82580_CFG_ASSERT_CRS_ON_TX       (1 << 15)
+#define I82580_CFG_ENABLE_DOWNSHIFT       (3 << 10) /* auto downshift 100/10 */
+#define I82580_CTRL_REG                   23
+#define I82580_CTRL_DOWNSHIFT_MASK        (7 << 10)
+
+/* 82580 specific PHY registers */
+#define I82580_PHY_CTRL_2            18
+#define I82580_PHY_LBK_CTRL          19
+#define I82580_PHY_STATUS_2          26
+#define I82580_PHY_DIAG_STATUS       31
+
+/* I82580 PHY Status 2 */
+#define I82580_PHY_STATUS2_REV_POLARITY   0x0400
+#define I82580_PHY_STATUS2_MDIX           0x0800
+#define I82580_PHY_STATUS2_SPEED_MASK     0x0300
+#define I82580_PHY_STATUS2_SPEED_1000MBPS 0x0200
+#define I82580_PHY_STATUS2_SPEED_100MBPS  0x0100
+
+/* I82580 PHY Control 2 */
+#define I82580_PHY_CTRL2_AUTO_MDIX        0x0400
+#define I82580_PHY_CTRL2_FORCE_MDI_MDIX   0x0200
+
+/* I82580 PHY Diagnostics Status */
+#define I82580_DSTATUS_CABLE_LENGTH       0x03FC
+#define I82580_DSTATUS_CABLE_LENGTH_SHIFT 2
+/* Enable flexible speed on link-up */
+#define IGP02E1000_PM_D0_LPLU             0x0002 /* For D0a states */
+#define IGP02E1000_PM_D3_LPLU             0x0004 /* For all other states */
+#define IGP01E1000_PLHR_SS_DOWNGRADE      0x8000
+#define IGP01E1000_PSSR_POLARITY_REVERSED 0x0002
+#define IGP01E1000_PSSR_MDIX              0x0800
+#define IGP01E1000_PSSR_SPEED_MASK        0xC000
+#define IGP01E1000_PSSR_SPEED_1000MBPS    0xC000
+#define IGP02E1000_PHY_CHANNEL_NUM        4
+#define IGP02E1000_PHY_AGC_A              0x11B1
+#define IGP02E1000_PHY_AGC_B              0x12B1
+#define IGP02E1000_PHY_AGC_C              0x14B1
+#define IGP02E1000_PHY_AGC_D              0x18B1
+#define IGP02E1000_AGC_LENGTH_SHIFT       9   /* Course - 15:13, Fine - 12:9 */
+#define IGP02E1000_AGC_LENGTH_MASK        0x7F
+#define IGP02E1000_AGC_RANGE              15
+
+#define E1000_CABLE_LENGTH_UNDEFINED      0xFF
+
+#endif
diff --git a/drivers/net/ethernet/intel/igb/e1000_regs.h b/drivers/net/ethernet/intel/igb/e1000_regs.h
new file mode 100644
index 00000000000..0a860bc1198
--- /dev/null
+++ b/drivers/net/ethernet/intel/igb/e1000_regs.h
@@ -0,0 +1,355 @@
+/*******************************************************************************
+
+  Intel(R) Gigabit Ethernet Linux driver
+  Copyright(c) 2007-2011 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_REGS_H_
+#define _E1000_REGS_H_
+
+#define E1000_CTRL     0x00000  /* Device Control - RW */
+#define E1000_STATUS   0x00008  /* Device Status - RO */
+#define E1000_EECD     0x00010  /* EEPROM/Flash Control - RW */
+#define E1000_EERD     0x00014  /* EEPROM Read - RW */
+#define E1000_CTRL_EXT 0x00018  /* Extended Device Control - RW */
+#define E1000_MDIC     0x00020  /* MDI Control - RW */
+#define E1000_MDICNFG  0x00E04  /* MDI Config - RW */
+#define E1000_SCTL     0x00024  /* SerDes Control - RW */
+#define E1000_FCAL     0x00028  /* Flow Control Address Low - RW */
+#define E1000_FCAH     0x0002C  /* Flow Control Address High -RW */
+#define E1000_FCT      0x00030  /* Flow Control Type - RW */
+#define E1000_CONNSW   0x00034  /* Copper/Fiber switch control - RW */
+#define E1000_VET      0x00038  /* VLAN Ether Type - RW */
+#define E1000_ICR      0x000C0  /* Interrupt Cause Read - R/clr */
+#define E1000_ITR      0x000C4  /* Interrupt Throttling Rate - RW */
+#define E1000_ICS      0x000C8  /* Interrupt Cause Set - WO */
+#define E1000_IMS      0x000D0  /* Interrupt Mask Set - RW */
+#define E1000_IMC      0x000D8  /* Interrupt Mask Clear - WO */
+#define E1000_IAM      0x000E0  /* Interrupt Acknowledge Auto Mask */
+#define E1000_RCTL     0x00100  /* RX Control - RW */
+#define E1000_FCTTV    0x00170  /* Flow Control Transmit Timer Value - RW */
+#define E1000_TXCW     0x00178  /* TX Configuration Word - RW */
+#define E1000_EICR     0x01580  /* Ext. Interrupt Cause Read - R/clr */
+#define E1000_EITR(_n) (0x01680 + (0x4 * (_n)))
+#define E1000_EICS     0x01520  /* Ext. Interrupt Cause Set - W0 */
+#define E1000_EIMS     0x01524  /* Ext. Interrupt Mask Set/Read - RW */
+#define E1000_EIMC     0x01528  /* Ext. Interrupt Mask Clear - WO */
+#define E1000_EIAC     0x0152C  /* Ext. Interrupt Auto Clear - RW */
+#define E1000_EIAM     0x01530  /* Ext. Interrupt Ack Auto Clear Mask - RW */
+#define E1000_GPIE     0x01514  /* General Purpose Interrupt Enable - RW */
+#define E1000_IVAR0    0x01700  /* Interrupt Vector Allocation (array) - RW */
+#define E1000_IVAR_MISC 0x01740 /* IVAR for "other" causes - RW */
+#define E1000_TCTL     0x00400  /* TX Control - RW */
+#define E1000_TCTL_EXT 0x00404  /* Extended TX Control - RW */
+#define E1000_TIPG     0x00410  /* TX Inter-packet gap -RW */
+#define E1000_AIT      0x00458  /* Adaptive Interframe Spacing Throttle - RW */
+#define E1000_LEDCTL   0x00E00  /* LED Control - RW */
+#define E1000_PBA      0x01000  /* Packet Buffer Allocation - RW */
+#define E1000_PBS      0x01008  /* Packet Buffer Size */
+#define E1000_EEMNGCTL 0x01010  /* MNG EEprom Control */
+#define E1000_EEWR     0x0102C  /* EEPROM Write Register - RW */
+#define E1000_I2CCMD   0x01028  /* SFPI2C Command Register - RW */
+#define E1000_FRTIMER  0x01048  /* Free Running Timer - RW */
+#define E1000_TCPTIMER 0x0104C  /* TCP Timer - RW */
+#define E1000_FCRTL    0x02160  /* Flow Control Receive Threshold Low - RW */
+#define E1000_FCRTH    0x02168  /* Flow Control Receive Threshold High - RW */
+#define E1000_FCRTV    0x02460  /* Flow Control Refresh Timer Value - RW */
+
+/* IEEE 1588 TIMESYNCH */
+#define E1000_TSYNCRXCTL 0x0B620 /* Rx Time Sync Control register - RW */
+#define E1000_TSYNCTXCTL 0x0B614 /* Tx Time Sync Control register - RW */
+#define E1000_TSYNCRXCFG 0x05F50 /* Time Sync Rx Configuration - RW */
+#define E1000_RXSTMPL    0x0B624 /* Rx timestamp Low - RO */
+#define E1000_RXSTMPH    0x0B628 /* Rx timestamp High - RO */
+#define E1000_RXSATRL    0x0B62C /* Rx timestamp attribute low - RO */
+#define E1000_RXSATRH    0x0B630 /* Rx timestamp attribute high - RO */
+#define E1000_TXSTMPL    0x0B618 /* Tx timestamp value Low - RO */
+#define E1000_TXSTMPH    0x0B61C /* Tx timestamp value High - RO */
+#define E1000_SYSTIML    0x0B600 /* System time register Low - RO */
+#define E1000_SYSTIMH    0x0B604 /* System time register High - RO */
+#define E1000_TIMINCA    0x0B608 /* Increment attributes register - RW */
+#define E1000_TSAUXC     0x0B640 /* Timesync Auxiliary Control register */
+#define E1000_SYSTIMR    0x0B6F8 /* System time register Residue */
+
+/* Filtering Registers */
+#define E1000_SAQF(_n) (0x5980 + 4 * (_n))
+#define E1000_DAQF(_n) (0x59A0 + 4 * (_n))
+#define E1000_SPQF(_n) (0x59C0 + 4 * (_n))
+#define E1000_FTQF(_n) (0x59E0 + 4 * (_n))
+#define E1000_SAQF0 E1000_SAQF(0)
+#define E1000_DAQF0 E1000_DAQF(0)
+#define E1000_SPQF0 E1000_SPQF(0)
+#define E1000_FTQF0 E1000_FTQF(0)
+#define E1000_SYNQF(_n) (0x055FC + (4 * (_n))) /* SYN Packet Queue Fltr */
+#define E1000_ETQF(_n)  (0x05CB0 + (4 * (_n))) /* EType Queue Fltr */
+
+#define E1000_RQDPC(_n) (0x0C030 + ((_n) * 0x40))
+
+/* DMA Coalescing registers */
+#define E1000_DMACR             0x02508 /* Control Register */
+#define E1000_DMCTXTH           0x03550 /* Transmit Threshold */
+#define E1000_DMCTLX            0x02514 /* Time to Lx Request */
+#define E1000_DMCRTRH           0x05DD0 /* Receive Packet Rate Threshold */
+#define E1000_DMCCNT            0x05DD4 /* Current Rx Count */
+#define E1000_FCRTC             0x02170 /* Flow Control Rx high watermark */
+#define E1000_PCIEMISC          0x05BB8 /* PCIE misc config register */
+
+/* TX Rate Limit Registers */
+#define E1000_RTTDQSEL	0x3604	/* Tx Desc Plane Queue Select - WO */
+#define E1000_RTTBCNRC	0x36B0	/* Tx BCN Rate-Scheduler Config - WO */
+
+/* Split and Replication RX Control - RW */
+#define E1000_RXPBS    0x02404  /* Rx Packet Buffer Size - RW */
+/*
+ * Convenience macros
+ *
+ * Note: "_n" is the queue number of the register to be written to.
+ *
+ * Example usage:
+ * E1000_RDBAL_REG(current_rx_queue)
+ */
+#define E1000_RDBAL(_n)   ((_n) < 4 ? (0x02800 + ((_n) * 0x100)) \
+				    : (0x0C000 + ((_n) * 0x40)))
+#define E1000_RDBAH(_n)   ((_n) < 4 ? (0x02804 + ((_n) * 0x100)) \
+				    : (0x0C004 + ((_n) * 0x40)))
+#define E1000_RDLEN(_n)   ((_n) < 4 ? (0x02808 + ((_n) * 0x100)) \
+				    : (0x0C008 + ((_n) * 0x40)))
+#define E1000_SRRCTL(_n)  ((_n) < 4 ? (0x0280C + ((_n) * 0x100)) \
+				    : (0x0C00C + ((_n) * 0x40)))
+#define E1000_RDH(_n)     ((_n) < 4 ? (0x02810 + ((_n) * 0x100)) \
+				    : (0x0C010 + ((_n) * 0x40)))
+#define E1000_RDT(_n)     ((_n) < 4 ? (0x02818 + ((_n) * 0x100)) \
+				    : (0x0C018 + ((_n) * 0x40)))
+#define E1000_RXDCTL(_n)  ((_n) < 4 ? (0x02828 + ((_n) * 0x100)) \
+				    : (0x0C028 + ((_n) * 0x40)))
+#define E1000_TDBAL(_n)   ((_n) < 4 ? (0x03800 + ((_n) * 0x100)) \
+				    : (0x0E000 + ((_n) * 0x40)))
+#define E1000_TDBAH(_n)   ((_n) < 4 ? (0x03804 + ((_n) * 0x100)) \
+				    : (0x0E004 + ((_n) * 0x40)))
+#define E1000_TDLEN(_n)   ((_n) < 4 ? (0x03808 + ((_n) * 0x100)) \
+				    : (0x0E008 + ((_n) * 0x40)))
+#define E1000_TDH(_n)     ((_n) < 4 ? (0x03810 + ((_n) * 0x100)) \
+				    : (0x0E010 + ((_n) * 0x40)))
+#define E1000_TDT(_n)     ((_n) < 4 ? (0x03818 + ((_n) * 0x100)) \
+				    : (0x0E018 + ((_n) * 0x40)))
+#define E1000_TXDCTL(_n)  ((_n) < 4 ? (0x03828 + ((_n) * 0x100)) \
+				    : (0x0E028 + ((_n) * 0x40)))
+#define E1000_DCA_TXCTRL(_n) (0x03814 + (_n << 8))
+#define E1000_DCA_RXCTRL(_n) (0x02814 + (_n << 8))
+#define E1000_TDWBAL(_n)  ((_n) < 4 ? (0x03838 + ((_n) * 0x100)) \
+				    : (0x0E038 + ((_n) * 0x40)))
+#define E1000_TDWBAH(_n)  ((_n) < 4 ? (0x0383C + ((_n) * 0x100)) \
+				    : (0x0E03C + ((_n) * 0x40)))
+#define E1000_TDFH     0x03410  /* TX Data FIFO Head - RW */
+#define E1000_TDFT     0x03418  /* TX Data FIFO Tail - RW */
+#define E1000_TDFHS    0x03420  /* TX Data FIFO Head Saved - RW */
+#define E1000_TDFPC    0x03430  /* TX Data FIFO Packet Count - RW */
+#define E1000_DTXCTL   0x03590  /* DMA TX Control - RW */
+#define E1000_CRCERRS  0x04000  /* CRC Error Count - R/clr */
+#define E1000_ALGNERRC 0x04004  /* Alignment Error Count - R/clr */
+#define E1000_SYMERRS  0x04008  /* Symbol Error Count - R/clr */
+#define E1000_RXERRC   0x0400C  /* Receive Error Count - R/clr */
+#define E1000_MPC      0x04010  /* Missed Packet Count - R/clr */
+#define E1000_SCC      0x04014  /* Single Collision Count - R/clr */
+#define E1000_ECOL     0x04018  /* Excessive Collision Count - R/clr */
+#define E1000_MCC      0x0401C  /* Multiple Collision Count - R/clr */
+#define E1000_LATECOL  0x04020  /* Late Collision Count - R/clr */
+#define E1000_COLC     0x04028  /* Collision Count - R/clr */
+#define E1000_DC       0x04030  /* Defer Count - R/clr */
+#define E1000_TNCRS    0x04034  /* TX-No CRS - R/clr */
+#define E1000_SEC      0x04038  /* Sequence Error Count - R/clr */
+#define E1000_CEXTERR  0x0403C  /* Carrier Extension Error Count - R/clr */
+#define E1000_RLEC     0x04040  /* Receive Length Error Count - R/clr */
+#define E1000_XONRXC   0x04048  /* XON RX Count - R/clr */
+#define E1000_XONTXC   0x0404C  /* XON TX Count - R/clr */
+#define E1000_XOFFRXC  0x04050  /* XOFF RX Count - R/clr */
+#define E1000_XOFFTXC  0x04054  /* XOFF TX Count - R/clr */
+#define E1000_FCRUC    0x04058  /* Flow Control RX Unsupported Count- R/clr */
+#define E1000_PRC64    0x0405C  /* Packets RX (64 bytes) - R/clr */
+#define E1000_PRC127   0x04060  /* Packets RX (65-127 bytes) - R/clr */
+#define E1000_PRC255   0x04064  /* Packets RX (128-255 bytes) - R/clr */
+#define E1000_PRC511   0x04068  /* Packets RX (255-511 bytes) - R/clr */
+#define E1000_PRC1023  0x0406C  /* Packets RX (512-1023 bytes) - R/clr */
+#define E1000_PRC1522  0x04070  /* Packets RX (1024-1522 bytes) - R/clr */
+#define E1000_GPRC     0x04074  /* Good Packets RX Count - R/clr */
+#define E1000_BPRC     0x04078  /* Broadcast Packets RX Count - R/clr */
+#define E1000_MPRC     0x0407C  /* Multicast Packets RX Count - R/clr */
+#define E1000_GPTC     0x04080  /* Good Packets TX Count - R/clr */
+#define E1000_GORCL    0x04088  /* Good Octets RX Count Low - R/clr */
+#define E1000_GORCH    0x0408C  /* Good Octets RX Count High - R/clr */
+#define E1000_GOTCL    0x04090  /* Good Octets TX Count Low - R/clr */
+#define E1000_GOTCH    0x04094  /* Good Octets TX Count High - R/clr */
+#define E1000_RNBC     0x040A0  /* RX No Buffers Count - R/clr */
+#define E1000_RUC      0x040A4  /* RX Undersize Count - R/clr */
+#define E1000_RFC      0x040A8  /* RX Fragment Count - R/clr */
+#define E1000_ROC      0x040AC  /* RX Oversize Count - R/clr */
+#define E1000_RJC      0x040B0  /* RX Jabber Count - R/clr */
+#define E1000_MGTPRC   0x040B4  /* Management Packets RX Count - R/clr */
+#define E1000_MGTPDC   0x040B8  /* Management Packets Dropped Count - R/clr */
+#define E1000_MGTPTC   0x040BC  /* Management Packets TX Count - R/clr */
+#define E1000_TORL     0x040C0  /* Total Octets RX Low - R/clr */
+#define E1000_TORH     0x040C4  /* Total Octets RX High - R/clr */
+#define E1000_TOTL     0x040C8  /* Total Octets TX Low - R/clr */
+#define E1000_TOTH     0x040CC  /* Total Octets TX High - R/clr */
+#define E1000_TPR      0x040D0  /* Total Packets RX - R/clr */
+#define E1000_TPT      0x040D4  /* Total Packets TX - R/clr */
+#define E1000_PTC64    0x040D8  /* Packets TX (64 bytes) - R/clr */
+#define E1000_PTC127   0x040DC  /* Packets TX (65-127 bytes) - R/clr */
+#define E1000_PTC255   0x040E0  /* Packets TX (128-255 bytes) - R/clr */
+#define E1000_PTC511   0x040E4  /* Packets TX (256-511 bytes) - R/clr */
+#define E1000_PTC1023  0x040E8  /* Packets TX (512-1023 bytes) - R/clr */
+#define E1000_PTC1522  0x040EC  /* Packets TX (1024-1522 Bytes) - R/clr */
+#define E1000_MPTC     0x040F0  /* Multicast Packets TX Count - R/clr */
+#define E1000_BPTC     0x040F4  /* Broadcast Packets TX Count - R/clr */
+#define E1000_TSCTC    0x040F8  /* TCP Segmentation Context TX - R/clr */
+#define E1000_TSCTFC   0x040FC  /* TCP Segmentation Context TX Fail - R/clr */
+#define E1000_IAC      0x04100  /* Interrupt Assertion Count */
+/* Interrupt Cause Rx Packet Timer Expire Count */
+#define E1000_ICRXPTC  0x04104
+/* Interrupt Cause Rx Absolute Timer Expire Count */
+#define E1000_ICRXATC  0x04108
+/* Interrupt Cause Tx Packet Timer Expire Count */
+#define E1000_ICTXPTC  0x0410C
+/* Interrupt Cause Tx Absolute Timer Expire Count */
+#define E1000_ICTXATC  0x04110
+/* Interrupt Cause Tx Queue Empty Count */
+#define E1000_ICTXQEC  0x04118
+/* Interrupt Cause Tx Queue Minimum Threshold Count */
+#define E1000_ICTXQMTC 0x0411C
+/* Interrupt Cause Rx Descriptor Minimum Threshold Count */
+#define E1000_ICRXDMTC 0x04120
+#define E1000_ICRXOC   0x04124  /* Interrupt Cause Receiver Overrun Count */
+#define E1000_PCS_CFG0    0x04200  /* PCS Configuration 0 - RW */
+#define E1000_PCS_LCTL    0x04208  /* PCS Link Control - RW */
+#define E1000_PCS_LSTAT   0x0420C  /* PCS Link Status - RO */
+#define E1000_CBTMPC      0x0402C  /* Circuit Breaker TX Packet Count */
+#define E1000_HTDPMC      0x0403C  /* Host Transmit Discarded Packets */
+#define E1000_CBRMPC      0x040FC  /* Circuit Breaker RX Packet Count */
+#define E1000_RPTHC       0x04104  /* Rx Packets To Host */
+#define E1000_HGPTC       0x04118  /* Host Good Packets TX Count */
+#define E1000_HTCBDPC     0x04124  /* Host TX Circuit Breaker Dropped Count */
+#define E1000_HGORCL      0x04128  /* Host Good Octets Received Count Low */
+#define E1000_HGORCH      0x0412C  /* Host Good Octets Received Count High */
+#define E1000_HGOTCL      0x04130  /* Host Good Octets Transmit Count Low */
+#define E1000_HGOTCH      0x04134  /* Host Good Octets Transmit Count High */
+#define E1000_LENERRS     0x04138  /* Length Errors Count */
+#define E1000_SCVPC       0x04228  /* SerDes/SGMII Code Violation Pkt Count */
+#define E1000_PCS_ANADV   0x04218  /* AN advertisement - RW */
+#define E1000_PCS_LPAB    0x0421C  /* Link Partner Ability - RW */
+#define E1000_PCS_NPTX    0x04220  /* AN Next Page Transmit - RW */
+#define E1000_PCS_LPABNP  0x04224  /* Link Partner Ability Next Page - RW */
+#define E1000_RXCSUM   0x05000  /* RX Checksum Control - RW */
+#define E1000_RLPML    0x05004  /* RX Long Packet Max Length */
+#define E1000_RFCTL    0x05008  /* Receive Filter Control*/
+#define E1000_MTA      0x05200  /* Multicast Table Array - RW Array */
+#define E1000_RA       0x05400  /* Receive Address - RW Array */
+#define E1000_RA2      0x054E0  /* 2nd half of receive address array - RW Array */
+#define E1000_PSRTYPE(_i)       (0x05480 + ((_i) * 4))
+#define E1000_RAL(_i)  (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \
+                                       (0x054E0 + ((_i - 16) * 8)))
+#define E1000_RAH(_i)  (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \
+                                       (0x054E4 + ((_i - 16) * 8)))
+#define E1000_IP4AT_REG(_i)     (0x05840 + ((_i) * 8))
+#define E1000_IP6AT_REG(_i)     (0x05880 + ((_i) * 4))
+#define E1000_WUPM_REG(_i)      (0x05A00 + ((_i) * 4))
+#define E1000_FFMT_REG(_i)      (0x09000 + ((_i) * 8))
+#define E1000_FFVT_REG(_i)      (0x09800 + ((_i) * 8))
+#define E1000_FFLT_REG(_i)      (0x05F00 + ((_i) * 8))
+#define E1000_VFTA     0x05600  /* VLAN Filter Table Array - RW Array */
+#define E1000_VT_CTL   0x0581C  /* VMDq Control - RW */
+#define E1000_WUC      0x05800  /* Wakeup Control - RW */
+#define E1000_WUFC     0x05808  /* Wakeup Filter Control - RW */
+#define E1000_WUS      0x05810  /* Wakeup Status - RO */
+#define E1000_MANC     0x05820  /* Management Control - RW */
+#define E1000_IPAV     0x05838  /* IP Address Valid - RW */
+#define E1000_WUPL     0x05900  /* Wakeup Packet Length - RW */
+
+#define E1000_SW_FW_SYNC  0x05B5C /* Software-Firmware Synchronization - RW */
+#define E1000_CCMCTL      0x05B48 /* CCM Control Register */
+#define E1000_GIOCTL      0x05B44 /* GIO Analog Control Register */
+#define E1000_SCCTL       0x05B4C /* PCIc PLL Configuration Register */
+#define E1000_GCR         0x05B00 /* PCI-Ex Control */
+#define E1000_FACTPS    0x05B30 /* Function Active and Power State to MNG */
+#define E1000_SWSM      0x05B50 /* SW Semaphore */
+#define E1000_FWSM      0x05B54 /* FW Semaphore */
+#define E1000_DCA_CTRL  0x05B74 /* DCA Control - RW */
+
+/* RSS registers */
+#define E1000_MRQC      0x05818 /* Multiple Receive Control - RW */
+#define E1000_IMIR(_i)      (0x05A80 + ((_i) * 4))  /* Immediate Interrupt */
+#define E1000_IMIREXT(_i)   (0x05AA0 + ((_i) * 4))  /* Immediate Interrupt Ext*/
+#define E1000_IMIRVP    0x05AC0 /* Immediate Interrupt RX VLAN Priority - RW */
+/* MSI-X Allocation Register (_i) - RW */
+#define E1000_MSIXBM(_i)    (0x01600 + ((_i) * 4))
+/* Redirection Table - RW Array */
+#define E1000_RETA(_i)  (0x05C00 + ((_i) * 4))
+#define E1000_RSSRK(_i) (0x05C80 + ((_i) * 4)) /* RSS Random Key - RW Array */
+
+/* VT Registers */
+#define E1000_MBVFICR   0x00C80 /* Mailbox VF Cause - RWC */
+#define E1000_MBVFIMR   0x00C84 /* Mailbox VF int Mask - RW */
+#define E1000_VFLRE     0x00C88 /* VF Register Events - RWC */
+#define E1000_VFRE      0x00C8C /* VF Receive Enables */
+#define E1000_VFTE      0x00C90 /* VF Transmit Enables */
+#define E1000_QDE       0x02408 /* Queue Drop Enable - RW */
+#define E1000_DTXSWC    0x03500 /* DMA Tx Switch Control - RW */
+#define E1000_WVBR      0x03554 /* VM Wrong Behavior - RWS */
+#define E1000_RPLOLR    0x05AF0 /* Replication Offload - RW */
+#define E1000_UTA       0x0A000 /* Unicast Table Array - RW */
+#define E1000_IOVTCL    0x05BBC /* IOV Control Register */
+#define E1000_TXSWC     0x05ACC /* Tx Switch Control */
+/* These act per VF so an array friendly macro is used */
+#define E1000_P2VMAILBOX(_n)   (0x00C00 + (4 * (_n)))
+#define E1000_VMBMEM(_n)       (0x00800 + (64 * (_n)))
+#define E1000_VMOLR(_n)        (0x05AD0 + (4 * (_n)))
+#define E1000_VLVF(_n)         (0x05D00 + (4 * (_n))) /* VLAN Virtual Machine
+                                                       * Filter - RW */
+#define E1000_VMVIR(_n)        (0x03700 + (4 * (_n)))
+
+#define wr32(reg, value) (writel(value, hw->hw_addr + reg))
+#define rd32(reg) (readl(hw->hw_addr + reg))
+#define wrfl() ((void)rd32(E1000_STATUS))
+
+#define array_wr32(reg, offset, value) \
+	(writel(value, hw->hw_addr + reg + ((offset) << 2)))
+#define array_rd32(reg, offset) \
+	(readl(hw->hw_addr + reg + ((offset) << 2)))
+
+/* DMA Coalescing registers */
+#define E1000_PCIEMISC          0x05BB8 /* PCIE misc config register */
+
+/* Energy Efficient Ethernet "EEE" register */
+#define E1000_IPCNFG  0x0E38  /* Internal PHY Configuration */
+#define E1000_EEER    0x0E30  /* Energy Efficient Ethernet */
+
+/* Thermal Sensor Register */
+#define E1000_THSTAT    0x08110 /* Thermal Sensor Status */
+
+/* OS2BMC Registers */
+#define E1000_B2OSPC    0x08FE0 /* BMC2OS packets sent by BMC */
+#define E1000_B2OGPRC   0x04158 /* BMC2OS packets received by host */
+#define E1000_O2BGPTC   0x08FE4 /* OS2BMC packets received by BMC */
+#define E1000_O2BSPC    0x0415C /* OS2BMC packets transmitted by host */
+
+#endif
diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h
new file mode 100644
index 00000000000..c69feebf265
--- /dev/null
+++ b/drivers/net/ethernet/intel/igb/igb.h
@@ -0,0 +1,450 @@
+/*******************************************************************************
+
+  Intel(R) Gigabit Ethernet Linux driver
+  Copyright(c) 2007-2011 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+
+/* Linux PRO/1000 Ethernet Driver main header file */
+
+#ifndef _IGB_H_
+#define _IGB_H_
+
+#include "e1000_mac.h"
+#include "e1000_82575.h"
+
+#include <linux/clocksource.h>
+#include <linux/timecompare.h>
+#include <linux/net_tstamp.h>
+#include <linux/bitops.h>
+#include <linux/if_vlan.h>
+
+struct igb_adapter;
+
+/* Interrupt defines */
+#define IGB_START_ITR                    648 /* ~6000 ints/sec */
+#define IGB_4K_ITR                       980
+#define IGB_20K_ITR                      196
+#define IGB_70K_ITR                       56
+
+/* TX/RX descriptor defines */
+#define IGB_DEFAULT_TXD                  256
+#define IGB_DEFAULT_TX_WORK		 128
+#define IGB_MIN_TXD                       80
+#define IGB_MAX_TXD                     4096
+
+#define IGB_DEFAULT_RXD                  256
+#define IGB_MIN_RXD                       80
+#define IGB_MAX_RXD                     4096
+
+#define IGB_DEFAULT_ITR                    3 /* dynamic */
+#define IGB_MAX_ITR_USECS              10000
+#define IGB_MIN_ITR_USECS                 10
+#define NON_Q_VECTORS                      1
+#define MAX_Q_VECTORS                      8
+
+/* Transmit and receive queues */
+#define IGB_MAX_RX_QUEUES                  (adapter->vfs_allocated_count ? 2 : \
+                                           (hw->mac.type > e1000_82575 ? 8 : 4))
+#define IGB_MAX_TX_QUEUES                  16
+
+#define IGB_MAX_VF_MC_ENTRIES              30
+#define IGB_MAX_VF_FUNCTIONS               8
+#define IGB_MAX_VFTA_ENTRIES               128
+#define IGB_82576_VF_DEV_ID                0x10CA
+#define IGB_I350_VF_DEV_ID                 0x1520
+
+struct vf_data_storage {
+	unsigned char vf_mac_addresses[ETH_ALEN];
+	u16 vf_mc_hashes[IGB_MAX_VF_MC_ENTRIES];
+	u16 num_vf_mc_hashes;
+	u16 vlans_enabled;
+	u32 flags;
+	unsigned long last_nack;
+	u16 pf_vlan; /* When set, guest VLAN config not allowed. */
+	u16 pf_qos;
+	u16 tx_rate;
+	struct pci_dev *vfdev;
+};
+
+#define IGB_VF_FLAG_CTS            0x00000001 /* VF is clear to send data */
+#define IGB_VF_FLAG_UNI_PROMISC    0x00000002 /* VF has unicast promisc */
+#define IGB_VF_FLAG_MULTI_PROMISC  0x00000004 /* VF has multicast promisc */
+#define IGB_VF_FLAG_PF_SET_MAC     0x00000008 /* PF has set MAC address */
+
+/* RX descriptor control thresholds.
+ * PTHRESH - MAC will consider prefetch if it has fewer than this number of
+ *           descriptors available in its onboard memory.
+ *           Setting this to 0 disables RX descriptor prefetch.
+ * HTHRESH - MAC will only prefetch if there are at least this many descriptors
+ *           available in host memory.
+ *           If PTHRESH is 0, this should also be 0.
+ * WTHRESH - RX descriptor writeback threshold - MAC will delay writing back
+ *           descriptors until either it has this many to write back, or the
+ *           ITR timer expires.
+ */
+#define IGB_RX_PTHRESH                     8
+#define IGB_RX_HTHRESH                     8
+#define IGB_TX_PTHRESH                     8
+#define IGB_TX_HTHRESH                     1
+#define IGB_RX_WTHRESH                     ((hw->mac.type == e1000_82576 && \
+					     adapter->msix_entries) ? 1 : 4)
+#define IGB_TX_WTHRESH                     ((hw->mac.type == e1000_82576 && \
+					     adapter->msix_entries) ? 1 : 16)
+
+/* this is the size past which hardware will drop packets when setting LPE=0 */
+#define MAXIMUM_ETHERNET_VLAN_SIZE 1522
+
+/* Supported Rx Buffer Sizes */
+#define IGB_RXBUFFER_512   512
+#define IGB_RXBUFFER_16384 16384
+#define IGB_RX_HDR_LEN     IGB_RXBUFFER_512
+
+/* How many Tx Descriptors do we need to call netif_wake_queue ? */
+#define IGB_TX_QUEUE_WAKE	16
+/* How many Rx Buffers do we bundle into one write to the hardware ? */
+#define IGB_RX_BUFFER_WRITE	16	/* Must be power of 2 */
+
+#define AUTO_ALL_MODES            0
+#define IGB_EEPROM_APME         0x0400
+
+#ifndef IGB_MASTER_SLAVE
+/* Switch to override PHY master/slave setting */
+#define IGB_MASTER_SLAVE	e1000_ms_hw_default
+#endif
+
+#define IGB_MNG_VLAN_NONE -1
+
+#define IGB_TX_FLAGS_CSUM		0x00000001
+#define IGB_TX_FLAGS_VLAN		0x00000002
+#define IGB_TX_FLAGS_TSO		0x00000004
+#define IGB_TX_FLAGS_IPV4		0x00000008
+#define IGB_TX_FLAGS_TSTAMP		0x00000010
+#define IGB_TX_FLAGS_VLAN_MASK		0xffff0000
+#define IGB_TX_FLAGS_VLAN_SHIFT	16
+
+/* wrapper around a pointer to a socket buffer,
+ * so a DMA handle can be stored along with the buffer */
+struct igb_tx_buffer {
+	union e1000_adv_tx_desc *next_to_watch;
+	unsigned long time_stamp;
+	struct sk_buff *skb;
+	unsigned int bytecount;
+	u16 gso_segs;
+	__be16 protocol;
+	dma_addr_t dma;
+	u32 length;
+	u32 tx_flags;
+};
+
+struct igb_rx_buffer {
+	struct sk_buff *skb;
+	dma_addr_t dma;
+	struct page *page;
+	dma_addr_t page_dma;
+	u32 page_offset;
+};
+
+struct igb_tx_queue_stats {
+	u64 packets;
+	u64 bytes;
+	u64 restart_queue;
+	u64 restart_queue2;
+};
+
+struct igb_rx_queue_stats {
+	u64 packets;
+	u64 bytes;
+	u64 drops;
+	u64 csum_err;
+	u64 alloc_failed;
+};
+
+struct igb_ring_container {
+	struct igb_ring *ring;		/* pointer to linked list of rings */
+	unsigned int total_bytes;	/* total bytes processed this int */
+	unsigned int total_packets;	/* total packets processed this int */
+	u16 work_limit;			/* total work allowed per interrupt */
+	u8 count;			/* total number of rings in vector */
+	u8 itr;				/* current ITR setting for ring */
+};
+
+struct igb_q_vector {
+	struct igb_adapter *adapter;	/* backlink */
+	int cpu;			/* CPU for DCA */
+	u32 eims_value;			/* EIMS mask value */
+
+	struct igb_ring_container rx, tx;
+
+	struct napi_struct napi;
+	int numa_node;
+
+	u16 itr_val;
+	u8 set_itr;
+	void __iomem *itr_register;
+
+	char name[IFNAMSIZ + 9];
+};
+
+struct igb_ring {
+	struct igb_q_vector *q_vector;	/* backlink to q_vector */
+	struct net_device *netdev;	/* back pointer to net_device */
+	struct device *dev;		/* device pointer for dma mapping */
+	union {				/* array of buffer info structs */
+		struct igb_tx_buffer *tx_buffer_info;
+		struct igb_rx_buffer *rx_buffer_info;
+	};
+	void *desc;			/* descriptor ring memory */
+	unsigned long flags;		/* ring specific flags */
+	void __iomem *tail;		/* pointer to ring tail register */
+
+	u16 count;			/* number of desc. in the ring */
+	u8 queue_index;			/* logical index of the ring*/
+	u8 reg_idx;			/* physical index of the ring */
+	u32 size;			/* length of desc. ring in bytes */
+
+	/* everything past this point are written often */
+	u16 next_to_clean ____cacheline_aligned_in_smp;
+	u16 next_to_use;
+
+	union {
+		/* TX */
+		struct {
+			struct igb_tx_queue_stats tx_stats;
+			struct u64_stats_sync tx_syncp;
+			struct u64_stats_sync tx_syncp2;
+		};
+		/* RX */
+		struct {
+			struct igb_rx_queue_stats rx_stats;
+			struct u64_stats_sync rx_syncp;
+		};
+	};
+	/* Items past this point are only used during ring alloc / free */
+	dma_addr_t dma;                /* phys address of the ring */
+	int numa_node;                  /* node to alloc ring memory on */
+};
+
+enum e1000_ring_flags_t {
+	IGB_RING_FLAG_RX_SCTP_CSUM,
+	IGB_RING_FLAG_RX_LB_VLAN_BSWAP,
+	IGB_RING_FLAG_TX_CTX_IDX,
+	IGB_RING_FLAG_TX_DETECT_HANG
+};
+
+#define IGB_TXD_DCMD (E1000_ADVTXD_DCMD_EOP | E1000_ADVTXD_DCMD_RS)
+
+#define IGB_RX_DESC(R, i)	    \
+	(&(((union e1000_adv_rx_desc *)((R)->desc))[i]))
+#define IGB_TX_DESC(R, i)	    \
+	(&(((union e1000_adv_tx_desc *)((R)->desc))[i]))
+#define IGB_TX_CTXTDESC(R, i)	    \
+	(&(((struct e1000_adv_tx_context_desc *)((R)->desc))[i]))
+
+/* igb_test_staterr - tests bits within Rx descriptor status and error fields */
+static inline __le32 igb_test_staterr(union e1000_adv_rx_desc *rx_desc,
+				      const u32 stat_err_bits)
+{
+	return rx_desc->wb.upper.status_error & cpu_to_le32(stat_err_bits);
+}
+
+/* igb_desc_unused - calculate if we have unused descriptors */
+static inline int igb_desc_unused(struct igb_ring *ring)
+{
+	if (ring->next_to_clean > ring->next_to_use)
+		return ring->next_to_clean - ring->next_to_use - 1;
+
+	return ring->count + ring->next_to_clean - ring->next_to_use - 1;
+}
+
+/* board specific private data structure */
+struct igb_adapter {
+	unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
+
+	struct net_device *netdev;
+
+	unsigned long state;
+	unsigned int flags;
+
+	unsigned int num_q_vectors;
+	struct msix_entry *msix_entries;
+
+	/* Interrupt Throttle Rate */
+	u32 rx_itr_setting;
+	u32 tx_itr_setting;
+	u16 tx_itr;
+	u16 rx_itr;
+
+	/* TX */
+	u16 tx_work_limit;
+	u32 tx_timeout_count;
+	int num_tx_queues;
+	struct igb_ring *tx_ring[16];
+
+	/* RX */
+	int num_rx_queues;
+	struct igb_ring *rx_ring[16];
+
+	u32 max_frame_size;
+	u32 min_frame_size;
+
+	struct timer_list watchdog_timer;
+	struct timer_list phy_info_timer;
+
+	u16 mng_vlan_id;
+	u32 bd_number;
+	u32 wol;
+	u32 en_mng_pt;
+	u16 link_speed;
+	u16 link_duplex;
+
+	struct work_struct reset_task;
+	struct work_struct watchdog_task;
+	bool fc_autoneg;
+	u8  tx_timeout_factor;
+	struct timer_list blink_timer;
+	unsigned long led_status;
+
+	/* OS defined structs */
+	struct pci_dev *pdev;
+	struct cyclecounter cycles;
+	struct timecounter clock;
+	struct timecompare compare;
+	struct hwtstamp_config hwtstamp_config;
+
+	spinlock_t stats64_lock;
+	struct rtnl_link_stats64 stats64;
+
+	/* structs defined in e1000_hw.h */
+	struct e1000_hw hw;
+	struct e1000_hw_stats stats;
+	struct e1000_phy_info phy_info;
+	struct e1000_phy_stats phy_stats;
+
+	u32 test_icr;
+	struct igb_ring test_tx_ring;
+	struct igb_ring test_rx_ring;
+
+	int msg_enable;
+
+	struct igb_q_vector *q_vector[MAX_Q_VECTORS];
+	u32 eims_enable_mask;
+	u32 eims_other;
+
+	/* to not mess up cache alignment, always add to the bottom */
+	u32 eeprom_wol;
+
+	u16 tx_ring_count;
+	u16 rx_ring_count;
+	unsigned int vfs_allocated_count;
+	struct vf_data_storage *vf_data;
+	int vf_rate_link_speed;
+	u32 rss_queues;
+	u32 wvbr;
+	int node;
+	u32 *shadow_vfta;
+};
+
+#define IGB_FLAG_HAS_MSI           (1 << 0)
+#define IGB_FLAG_DCA_ENABLED       (1 << 1)
+#define IGB_FLAG_QUAD_PORT_A       (1 << 2)
+#define IGB_FLAG_QUEUE_PAIRS       (1 << 3)
+#define IGB_FLAG_DMAC              (1 << 4)
+
+/* DMA Coalescing defines */
+#define IGB_MIN_TXPBSIZE           20408
+#define IGB_TX_BUF_4096            4096
+#define IGB_DMCTLX_DCFLUSH_DIS     0x80000000  /* Disable DMA Coal Flush */
+
+#define IGB_82576_TSYNC_SHIFT 19
+#define IGB_82580_TSYNC_SHIFT 24
+#define IGB_TS_HDR_LEN        16
+enum e1000_state_t {
+	__IGB_TESTING,
+	__IGB_RESETTING,
+	__IGB_DOWN
+};
+
+enum igb_boards {
+	board_82575,
+};
+
+extern char igb_driver_name[];
+extern char igb_driver_version[];
+
+extern int igb_up(struct igb_adapter *);
+extern void igb_down(struct igb_adapter *);
+extern void igb_reinit_locked(struct igb_adapter *);
+extern void igb_reset(struct igb_adapter *);
+extern int igb_set_spd_dplx(struct igb_adapter *, u32, u8);
+extern int igb_setup_tx_resources(struct igb_ring *);
+extern int igb_setup_rx_resources(struct igb_ring *);
+extern void igb_free_tx_resources(struct igb_ring *);
+extern void igb_free_rx_resources(struct igb_ring *);
+extern void igb_configure_tx_ring(struct igb_adapter *, struct igb_ring *);
+extern void igb_configure_rx_ring(struct igb_adapter *, struct igb_ring *);
+extern void igb_setup_tctl(struct igb_adapter *);
+extern void igb_setup_rctl(struct igb_adapter *);
+extern netdev_tx_t igb_xmit_frame_ring(struct sk_buff *, struct igb_ring *);
+extern void igb_unmap_and_free_tx_resource(struct igb_ring *,
+					   struct igb_tx_buffer *);
+extern void igb_alloc_rx_buffers(struct igb_ring *, u16);
+extern void igb_update_stats(struct igb_adapter *, struct rtnl_link_stats64 *);
+extern bool igb_has_link(struct igb_adapter *adapter);
+extern void igb_set_ethtool_ops(struct net_device *);
+extern void igb_power_up_link(struct igb_adapter *);
+
+static inline s32 igb_reset_phy(struct e1000_hw *hw)
+{
+	if (hw->phy.ops.reset)
+		return hw->phy.ops.reset(hw);
+
+	return 0;
+}
+
+static inline s32 igb_read_phy_reg(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+	if (hw->phy.ops.read_reg)
+		return hw->phy.ops.read_reg(hw, offset, data);
+
+	return 0;
+}
+
+static inline s32 igb_write_phy_reg(struct e1000_hw *hw, u32 offset, u16 data)
+{
+	if (hw->phy.ops.write_reg)
+		return hw->phy.ops.write_reg(hw, offset, data);
+
+	return 0;
+}
+
+static inline s32 igb_get_phy_info(struct e1000_hw *hw)
+{
+	if (hw->phy.ops.get_phy_info)
+		return hw->phy.ops.get_phy_info(hw);
+
+	return 0;
+}
+
+#endif /* _IGB_H_ */
diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c
new file mode 100644
index 00000000000..43873eba2f6
--- /dev/null
+++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c
@@ -0,0 +1,2196 @@
+/*******************************************************************************
+
+  Intel(R) Gigabit Ethernet Linux driver
+  Copyright(c) 2007-2011 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/* ethtool support for igb */
+
+#include <linux/vmalloc.h>
+#include <linux/netdevice.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/if_ether.h>
+#include <linux/ethtool.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+
+#include "igb.h"
+
+struct igb_stats {
+	char stat_string[ETH_GSTRING_LEN];
+	int sizeof_stat;
+	int stat_offset;
+};
+
+#define IGB_STAT(_name, _stat) { \
+	.stat_string = _name, \
+	.sizeof_stat = FIELD_SIZEOF(struct igb_adapter, _stat), \
+	.stat_offset = offsetof(struct igb_adapter, _stat) \
+}
+static const struct igb_stats igb_gstrings_stats[] = {
+	IGB_STAT("rx_packets", stats.gprc),
+	IGB_STAT("tx_packets", stats.gptc),
+	IGB_STAT("rx_bytes", stats.gorc),
+	IGB_STAT("tx_bytes", stats.gotc),
+	IGB_STAT("rx_broadcast", stats.bprc),
+	IGB_STAT("tx_broadcast", stats.bptc),
+	IGB_STAT("rx_multicast", stats.mprc),
+	IGB_STAT("tx_multicast", stats.mptc),
+	IGB_STAT("multicast", stats.mprc),
+	IGB_STAT("collisions", stats.colc),
+	IGB_STAT("rx_crc_errors", stats.crcerrs),
+	IGB_STAT("rx_no_buffer_count", stats.rnbc),
+	IGB_STAT("rx_missed_errors", stats.mpc),
+	IGB_STAT("tx_aborted_errors", stats.ecol),
+	IGB_STAT("tx_carrier_errors", stats.tncrs),
+	IGB_STAT("tx_window_errors", stats.latecol),
+	IGB_STAT("tx_abort_late_coll", stats.latecol),
+	IGB_STAT("tx_deferred_ok", stats.dc),
+	IGB_STAT("tx_single_coll_ok", stats.scc),
+	IGB_STAT("tx_multi_coll_ok", stats.mcc),
+	IGB_STAT("tx_timeout_count", tx_timeout_count),
+	IGB_STAT("rx_long_length_errors", stats.roc),
+	IGB_STAT("rx_short_length_errors", stats.ruc),
+	IGB_STAT("rx_align_errors", stats.algnerrc),
+	IGB_STAT("tx_tcp_seg_good", stats.tsctc),
+	IGB_STAT("tx_tcp_seg_failed", stats.tsctfc),
+	IGB_STAT("rx_flow_control_xon", stats.xonrxc),
+	IGB_STAT("rx_flow_control_xoff", stats.xoffrxc),
+	IGB_STAT("tx_flow_control_xon", stats.xontxc),
+	IGB_STAT("tx_flow_control_xoff", stats.xofftxc),
+	IGB_STAT("rx_long_byte_count", stats.gorc),
+	IGB_STAT("tx_dma_out_of_sync", stats.doosync),
+	IGB_STAT("tx_smbus", stats.mgptc),
+	IGB_STAT("rx_smbus", stats.mgprc),
+	IGB_STAT("dropped_smbus", stats.mgpdc),
+	IGB_STAT("os2bmc_rx_by_bmc", stats.o2bgptc),
+	IGB_STAT("os2bmc_tx_by_bmc", stats.b2ospc),
+	IGB_STAT("os2bmc_tx_by_host", stats.o2bspc),
+	IGB_STAT("os2bmc_rx_by_host", stats.b2ogprc),
+};
+
+#define IGB_NETDEV_STAT(_net_stat) { \
+	.stat_string = __stringify(_net_stat), \
+	.sizeof_stat = FIELD_SIZEOF(struct rtnl_link_stats64, _net_stat), \
+	.stat_offset = offsetof(struct rtnl_link_stats64, _net_stat) \
+}
+static const struct igb_stats igb_gstrings_net_stats[] = {
+	IGB_NETDEV_STAT(rx_errors),
+	IGB_NETDEV_STAT(tx_errors),
+	IGB_NETDEV_STAT(tx_dropped),
+	IGB_NETDEV_STAT(rx_length_errors),
+	IGB_NETDEV_STAT(rx_over_errors),
+	IGB_NETDEV_STAT(rx_frame_errors),
+	IGB_NETDEV_STAT(rx_fifo_errors),
+	IGB_NETDEV_STAT(tx_fifo_errors),
+	IGB_NETDEV_STAT(tx_heartbeat_errors)
+};
+
+#define IGB_GLOBAL_STATS_LEN	\
+	(sizeof(igb_gstrings_stats) / sizeof(struct igb_stats))
+#define IGB_NETDEV_STATS_LEN	\
+	(sizeof(igb_gstrings_net_stats) / sizeof(struct igb_stats))
+#define IGB_RX_QUEUE_STATS_LEN \
+	(sizeof(struct igb_rx_queue_stats) / sizeof(u64))
+
+#define IGB_TX_QUEUE_STATS_LEN 3 /* packets, bytes, restart_queue */
+
+#define IGB_QUEUE_STATS_LEN \
+	((((struct igb_adapter *)netdev_priv(netdev))->num_rx_queues * \
+	  IGB_RX_QUEUE_STATS_LEN) + \
+	 (((struct igb_adapter *)netdev_priv(netdev))->num_tx_queues * \
+	  IGB_TX_QUEUE_STATS_LEN))
+#define IGB_STATS_LEN \
+	(IGB_GLOBAL_STATS_LEN + IGB_NETDEV_STATS_LEN + IGB_QUEUE_STATS_LEN)
+
+static const char igb_gstrings_test[][ETH_GSTRING_LEN] = {
+	"Register test  (offline)", "Eeprom test    (offline)",
+	"Interrupt test (offline)", "Loopback test  (offline)",
+	"Link test   (on/offline)"
+};
+#define IGB_TEST_LEN (sizeof(igb_gstrings_test) / ETH_GSTRING_LEN)
+
+static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	u32 status;
+
+	if (hw->phy.media_type == e1000_media_type_copper) {
+
+		ecmd->supported = (SUPPORTED_10baseT_Half |
+				   SUPPORTED_10baseT_Full |
+				   SUPPORTED_100baseT_Half |
+				   SUPPORTED_100baseT_Full |
+				   SUPPORTED_1000baseT_Full|
+				   SUPPORTED_Autoneg |
+				   SUPPORTED_TP);
+		ecmd->advertising = ADVERTISED_TP;
+
+		if (hw->mac.autoneg == 1) {
+			ecmd->advertising |= ADVERTISED_Autoneg;
+			/* the e1000 autoneg seems to match ethtool nicely */
+			ecmd->advertising |= hw->phy.autoneg_advertised;
+		}
+
+		ecmd->port = PORT_TP;
+		ecmd->phy_address = hw->phy.addr;
+	} else {
+		ecmd->supported   = (SUPPORTED_1000baseT_Full |
+				     SUPPORTED_FIBRE |
+				     SUPPORTED_Autoneg);
+
+		ecmd->advertising = (ADVERTISED_1000baseT_Full |
+				     ADVERTISED_FIBRE |
+				     ADVERTISED_Autoneg);
+
+		ecmd->port = PORT_FIBRE;
+	}
+
+	ecmd->transceiver = XCVR_INTERNAL;
+
+	status = rd32(E1000_STATUS);
+
+	if (status & E1000_STATUS_LU) {
+
+		if ((status & E1000_STATUS_SPEED_1000) ||
+		    hw->phy.media_type != e1000_media_type_copper)
+			ethtool_cmd_speed_set(ecmd, SPEED_1000);
+		else if (status & E1000_STATUS_SPEED_100)
+			ethtool_cmd_speed_set(ecmd, SPEED_100);
+		else
+			ethtool_cmd_speed_set(ecmd, SPEED_10);
+
+		if ((status & E1000_STATUS_FD) ||
+		    hw->phy.media_type != e1000_media_type_copper)
+			ecmd->duplex = DUPLEX_FULL;
+		else
+			ecmd->duplex = DUPLEX_HALF;
+	} else {
+		ethtool_cmd_speed_set(ecmd, -1);
+		ecmd->duplex = -1;
+	}
+
+	ecmd->autoneg = hw->mac.autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE;
+	return 0;
+}
+
+static int igb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+
+	/* When SoL/IDER sessions are active, autoneg/speed/duplex
+	 * cannot be changed */
+	if (igb_check_reset_block(hw)) {
+		dev_err(&adapter->pdev->dev, "Cannot change link "
+			"characteristics when SoL/IDER is active.\n");
+		return -EINVAL;
+	}
+
+	while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
+		msleep(1);
+
+	if (ecmd->autoneg == AUTONEG_ENABLE) {
+		hw->mac.autoneg = 1;
+		hw->phy.autoneg_advertised = ecmd->advertising |
+					     ADVERTISED_TP |
+					     ADVERTISED_Autoneg;
+		ecmd->advertising = hw->phy.autoneg_advertised;
+		if (adapter->fc_autoneg)
+			hw->fc.requested_mode = e1000_fc_default;
+	} else {
+		u32 speed = ethtool_cmd_speed(ecmd);
+		if (igb_set_spd_dplx(adapter, speed, ecmd->duplex)) {
+			clear_bit(__IGB_RESETTING, &adapter->state);
+			return -EINVAL;
+		}
+	}
+
+	/* reset the link */
+	if (netif_running(adapter->netdev)) {
+		igb_down(adapter);
+		igb_up(adapter);
+	} else
+		igb_reset(adapter);
+
+	clear_bit(__IGB_RESETTING, &adapter->state);
+	return 0;
+}
+
+static u32 igb_get_link(struct net_device *netdev)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct e1000_mac_info *mac = &adapter->hw.mac;
+
+	/*
+	 * If the link is not reported up to netdev, interrupts are disabled,
+	 * and so the physical link state may have changed since we last
+	 * looked. Set get_link_status to make sure that the true link
+	 * state is interrogated, rather than pulling a cached and possibly
+	 * stale link state from the driver.
+	 */
+	if (!netif_carrier_ok(netdev))
+		mac->get_link_status = 1;
+
+	return igb_has_link(adapter);
+}
+
+static void igb_get_pauseparam(struct net_device *netdev,
+			       struct ethtool_pauseparam *pause)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+
+	pause->autoneg =
+		(adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE);
+
+	if (hw->fc.current_mode == e1000_fc_rx_pause)
+		pause->rx_pause = 1;
+	else if (hw->fc.current_mode == e1000_fc_tx_pause)
+		pause->tx_pause = 1;
+	else if (hw->fc.current_mode == e1000_fc_full) {
+		pause->rx_pause = 1;
+		pause->tx_pause = 1;
+	}
+}
+
+static int igb_set_pauseparam(struct net_device *netdev,
+			      struct ethtool_pauseparam *pause)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	int retval = 0;
+
+	adapter->fc_autoneg = pause->autoneg;
+
+	while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
+		msleep(1);
+
+	if (adapter->fc_autoneg == AUTONEG_ENABLE) {
+		hw->fc.requested_mode = e1000_fc_default;
+		if (netif_running(adapter->netdev)) {
+			igb_down(adapter);
+			igb_up(adapter);
+		} else {
+			igb_reset(adapter);
+		}
+	} else {
+		if (pause->rx_pause && pause->tx_pause)
+			hw->fc.requested_mode = e1000_fc_full;
+		else if (pause->rx_pause && !pause->tx_pause)
+			hw->fc.requested_mode = e1000_fc_rx_pause;
+		else if (!pause->rx_pause && pause->tx_pause)
+			hw->fc.requested_mode = e1000_fc_tx_pause;
+		else if (!pause->rx_pause && !pause->tx_pause)
+			hw->fc.requested_mode = e1000_fc_none;
+
+		hw->fc.current_mode = hw->fc.requested_mode;
+
+		retval = ((hw->phy.media_type == e1000_media_type_copper) ?
+			  igb_force_mac_fc(hw) : igb_setup_link(hw));
+	}
+
+	clear_bit(__IGB_RESETTING, &adapter->state);
+	return retval;
+}
+
+static u32 igb_get_msglevel(struct net_device *netdev)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	return adapter->msg_enable;
+}
+
+static void igb_set_msglevel(struct net_device *netdev, u32 data)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	adapter->msg_enable = data;
+}
+
+static int igb_get_regs_len(struct net_device *netdev)
+{
+#define IGB_REGS_LEN 551
+	return IGB_REGS_LEN * sizeof(u32);
+}
+
+static void igb_get_regs(struct net_device *netdev,
+			 struct ethtool_regs *regs, void *p)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	u32 *regs_buff = p;
+	u8 i;
+
+	memset(p, 0, IGB_REGS_LEN * sizeof(u32));
+
+	regs->version = (1 << 24) | (hw->revision_id << 16) | hw->device_id;
+
+	/* General Registers */
+	regs_buff[0] = rd32(E1000_CTRL);
+	regs_buff[1] = rd32(E1000_STATUS);
+	regs_buff[2] = rd32(E1000_CTRL_EXT);
+	regs_buff[3] = rd32(E1000_MDIC);
+	regs_buff[4] = rd32(E1000_SCTL);
+	regs_buff[5] = rd32(E1000_CONNSW);
+	regs_buff[6] = rd32(E1000_VET);
+	regs_buff[7] = rd32(E1000_LEDCTL);
+	regs_buff[8] = rd32(E1000_PBA);
+	regs_buff[9] = rd32(E1000_PBS);
+	regs_buff[10] = rd32(E1000_FRTIMER);
+	regs_buff[11] = rd32(E1000_TCPTIMER);
+
+	/* NVM Register */
+	regs_buff[12] = rd32(E1000_EECD);
+
+	/* Interrupt */
+	/* Reading EICS for EICR because they read the
+	 * same but EICS does not clear on read */
+	regs_buff[13] = rd32(E1000_EICS);
+	regs_buff[14] = rd32(E1000_EICS);
+	regs_buff[15] = rd32(E1000_EIMS);
+	regs_buff[16] = rd32(E1000_EIMC);
+	regs_buff[17] = rd32(E1000_EIAC);
+	regs_buff[18] = rd32(E1000_EIAM);
+	/* Reading ICS for ICR because they read the
+	 * same but ICS does not clear on read */
+	regs_buff[19] = rd32(E1000_ICS);
+	regs_buff[20] = rd32(E1000_ICS);
+	regs_buff[21] = rd32(E1000_IMS);
+	regs_buff[22] = rd32(E1000_IMC);
+	regs_buff[23] = rd32(E1000_IAC);
+	regs_buff[24] = rd32(E1000_IAM);
+	regs_buff[25] = rd32(E1000_IMIRVP);
+
+	/* Flow Control */
+	regs_buff[26] = rd32(E1000_FCAL);
+	regs_buff[27] = rd32(E1000_FCAH);
+	regs_buff[28] = rd32(E1000_FCTTV);
+	regs_buff[29] = rd32(E1000_FCRTL);
+	regs_buff[30] = rd32(E1000_FCRTH);
+	regs_buff[31] = rd32(E1000_FCRTV);
+
+	/* Receive */
+	regs_buff[32] = rd32(E1000_RCTL);
+	regs_buff[33] = rd32(E1000_RXCSUM);
+	regs_buff[34] = rd32(E1000_RLPML);
+	regs_buff[35] = rd32(E1000_RFCTL);
+	regs_buff[36] = rd32(E1000_MRQC);
+	regs_buff[37] = rd32(E1000_VT_CTL);
+
+	/* Transmit */
+	regs_buff[38] = rd32(E1000_TCTL);
+	regs_buff[39] = rd32(E1000_TCTL_EXT);
+	regs_buff[40] = rd32(E1000_TIPG);
+	regs_buff[41] = rd32(E1000_DTXCTL);
+
+	/* Wake Up */
+	regs_buff[42] = rd32(E1000_WUC);
+	regs_buff[43] = rd32(E1000_WUFC);
+	regs_buff[44] = rd32(E1000_WUS);
+	regs_buff[45] = rd32(E1000_IPAV);
+	regs_buff[46] = rd32(E1000_WUPL);
+
+	/* MAC */
+	regs_buff[47] = rd32(E1000_PCS_CFG0);
+	regs_buff[48] = rd32(E1000_PCS_LCTL);
+	regs_buff[49] = rd32(E1000_PCS_LSTAT);
+	regs_buff[50] = rd32(E1000_PCS_ANADV);
+	regs_buff[51] = rd32(E1000_PCS_LPAB);
+	regs_buff[52] = rd32(E1000_PCS_NPTX);
+	regs_buff[53] = rd32(E1000_PCS_LPABNP);
+
+	/* Statistics */
+	regs_buff[54] = adapter->stats.crcerrs;
+	regs_buff[55] = adapter->stats.algnerrc;
+	regs_buff[56] = adapter->stats.symerrs;
+	regs_buff[57] = adapter->stats.rxerrc;
+	regs_buff[58] = adapter->stats.mpc;
+	regs_buff[59] = adapter->stats.scc;
+	regs_buff[60] = adapter->stats.ecol;
+	regs_buff[61] = adapter->stats.mcc;
+	regs_buff[62] = adapter->stats.latecol;
+	regs_buff[63] = adapter->stats.colc;
+	regs_buff[64] = adapter->stats.dc;
+	regs_buff[65] = adapter->stats.tncrs;
+	regs_buff[66] = adapter->stats.sec;
+	regs_buff[67] = adapter->stats.htdpmc;
+	regs_buff[68] = adapter->stats.rlec;
+	regs_buff[69] = adapter->stats.xonrxc;
+	regs_buff[70] = adapter->stats.xontxc;
+	regs_buff[71] = adapter->stats.xoffrxc;
+	regs_buff[72] = adapter->stats.xofftxc;
+	regs_buff[73] = adapter->stats.fcruc;
+	regs_buff[74] = adapter->stats.prc64;
+	regs_buff[75] = adapter->stats.prc127;
+	regs_buff[76] = adapter->stats.prc255;
+	regs_buff[77] = adapter->stats.prc511;
+	regs_buff[78] = adapter->stats.prc1023;
+	regs_buff[79] = adapter->stats.prc1522;
+	regs_buff[80] = adapter->stats.gprc;
+	regs_buff[81] = adapter->stats.bprc;
+	regs_buff[82] = adapter->stats.mprc;
+	regs_buff[83] = adapter->stats.gptc;
+	regs_buff[84] = adapter->stats.gorc;
+	regs_buff[86] = adapter->stats.gotc;
+	regs_buff[88] = adapter->stats.rnbc;
+	regs_buff[89] = adapter->stats.ruc;
+	regs_buff[90] = adapter->stats.rfc;
+	regs_buff[91] = adapter->stats.roc;
+	regs_buff[92] = adapter->stats.rjc;
+	regs_buff[93] = adapter->stats.mgprc;
+	regs_buff[94] = adapter->stats.mgpdc;
+	regs_buff[95] = adapter->stats.mgptc;
+	regs_buff[96] = adapter->stats.tor;
+	regs_buff[98] = adapter->stats.tot;
+	regs_buff[100] = adapter->stats.tpr;
+	regs_buff[101] = adapter->stats.tpt;
+	regs_buff[102] = adapter->stats.ptc64;
+	regs_buff[103] = adapter->stats.ptc127;
+	regs_buff[104] = adapter->stats.ptc255;
+	regs_buff[105] = adapter->stats.ptc511;
+	regs_buff[106] = adapter->stats.ptc1023;
+	regs_buff[107] = adapter->stats.ptc1522;
+	regs_buff[108] = adapter->stats.mptc;
+	regs_buff[109] = adapter->stats.bptc;
+	regs_buff[110] = adapter->stats.tsctc;
+	regs_buff[111] = adapter->stats.iac;
+	regs_buff[112] = adapter->stats.rpthc;
+	regs_buff[113] = adapter->stats.hgptc;
+	regs_buff[114] = adapter->stats.hgorc;
+	regs_buff[116] = adapter->stats.hgotc;
+	regs_buff[118] = adapter->stats.lenerrs;
+	regs_buff[119] = adapter->stats.scvpc;
+	regs_buff[120] = adapter->stats.hrmpc;
+
+	for (i = 0; i < 4; i++)
+		regs_buff[121 + i] = rd32(E1000_SRRCTL(i));
+	for (i = 0; i < 4; i++)
+		regs_buff[125 + i] = rd32(E1000_PSRTYPE(i));
+	for (i = 0; i < 4; i++)
+		regs_buff[129 + i] = rd32(E1000_RDBAL(i));
+	for (i = 0; i < 4; i++)
+		regs_buff[133 + i] = rd32(E1000_RDBAH(i));
+	for (i = 0; i < 4; i++)
+		regs_buff[137 + i] = rd32(E1000_RDLEN(i));
+	for (i = 0; i < 4; i++)
+		regs_buff[141 + i] = rd32(E1000_RDH(i));
+	for (i = 0; i < 4; i++)
+		regs_buff[145 + i] = rd32(E1000_RDT(i));
+	for (i = 0; i < 4; i++)
+		regs_buff[149 + i] = rd32(E1000_RXDCTL(i));
+
+	for (i = 0; i < 10; i++)
+		regs_buff[153 + i] = rd32(E1000_EITR(i));
+	for (i = 0; i < 8; i++)
+		regs_buff[163 + i] = rd32(E1000_IMIR(i));
+	for (i = 0; i < 8; i++)
+		regs_buff[171 + i] = rd32(E1000_IMIREXT(i));
+	for (i = 0; i < 16; i++)
+		regs_buff[179 + i] = rd32(E1000_RAL(i));
+	for (i = 0; i < 16; i++)
+		regs_buff[195 + i] = rd32(E1000_RAH(i));
+
+	for (i = 0; i < 4; i++)
+		regs_buff[211 + i] = rd32(E1000_TDBAL(i));
+	for (i = 0; i < 4; i++)
+		regs_buff[215 + i] = rd32(E1000_TDBAH(i));
+	for (i = 0; i < 4; i++)
+		regs_buff[219 + i] = rd32(E1000_TDLEN(i));
+	for (i = 0; i < 4; i++)
+		regs_buff[223 + i] = rd32(E1000_TDH(i));
+	for (i = 0; i < 4; i++)
+		regs_buff[227 + i] = rd32(E1000_TDT(i));
+	for (i = 0; i < 4; i++)
+		regs_buff[231 + i] = rd32(E1000_TXDCTL(i));
+	for (i = 0; i < 4; i++)
+		regs_buff[235 + i] = rd32(E1000_TDWBAL(i));
+	for (i = 0; i < 4; i++)
+		regs_buff[239 + i] = rd32(E1000_TDWBAH(i));
+	for (i = 0; i < 4; i++)
+		regs_buff[243 + i] = rd32(E1000_DCA_TXCTRL(i));
+
+	for (i = 0; i < 4; i++)
+		regs_buff[247 + i] = rd32(E1000_IP4AT_REG(i));
+	for (i = 0; i < 4; i++)
+		regs_buff[251 + i] = rd32(E1000_IP6AT_REG(i));
+	for (i = 0; i < 32; i++)
+		regs_buff[255 + i] = rd32(E1000_WUPM_REG(i));
+	for (i = 0; i < 128; i++)
+		regs_buff[287 + i] = rd32(E1000_FFMT_REG(i));
+	for (i = 0; i < 128; i++)
+		regs_buff[415 + i] = rd32(E1000_FFVT_REG(i));
+	for (i = 0; i < 4; i++)
+		regs_buff[543 + i] = rd32(E1000_FFLT_REG(i));
+
+	regs_buff[547] = rd32(E1000_TDFH);
+	regs_buff[548] = rd32(E1000_TDFT);
+	regs_buff[549] = rd32(E1000_TDFHS);
+	regs_buff[550] = rd32(E1000_TDFPC);
+	regs_buff[551] = adapter->stats.o2bgptc;
+	regs_buff[552] = adapter->stats.b2ospc;
+	regs_buff[553] = adapter->stats.o2bspc;
+	regs_buff[554] = adapter->stats.b2ogprc;
+}
+
+static int igb_get_eeprom_len(struct net_device *netdev)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	return adapter->hw.nvm.word_size * 2;
+}
+
+static int igb_get_eeprom(struct net_device *netdev,
+			  struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	u16 *eeprom_buff;
+	int first_word, last_word;
+	int ret_val = 0;
+	u16 i;
+
+	if (eeprom->len == 0)
+		return -EINVAL;
+
+	eeprom->magic = hw->vendor_id | (hw->device_id << 16);
+
+	first_word = eeprom->offset >> 1;
+	last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+
+	eeprom_buff = kmalloc(sizeof(u16) *
+			(last_word - first_word + 1), GFP_KERNEL);
+	if (!eeprom_buff)
+		return -ENOMEM;
+
+	if (hw->nvm.type == e1000_nvm_eeprom_spi)
+		ret_val = hw->nvm.ops.read(hw, first_word,
+					    last_word - first_word + 1,
+					    eeprom_buff);
+	else {
+		for (i = 0; i < last_word - first_word + 1; i++) {
+			ret_val = hw->nvm.ops.read(hw, first_word + i, 1,
+						    &eeprom_buff[i]);
+			if (ret_val)
+				break;
+		}
+	}
+
+	/* Device's eeprom is always little-endian, word addressable */
+	for (i = 0; i < last_word - first_word + 1; i++)
+		le16_to_cpus(&eeprom_buff[i]);
+
+	memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1),
+			eeprom->len);
+	kfree(eeprom_buff);
+
+	return ret_val;
+}
+
+static int igb_set_eeprom(struct net_device *netdev,
+			  struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	u16 *eeprom_buff;
+	void *ptr;
+	int max_len, first_word, last_word, ret_val = 0;
+	u16 i;
+
+	if (eeprom->len == 0)
+		return -EOPNOTSUPP;
+
+	if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16)))
+		return -EFAULT;
+
+	max_len = hw->nvm.word_size * 2;
+
+	first_word = eeprom->offset >> 1;
+	last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+	eeprom_buff = kmalloc(max_len, GFP_KERNEL);
+	if (!eeprom_buff)
+		return -ENOMEM;
+
+	ptr = (void *)eeprom_buff;
+
+	if (eeprom->offset & 1) {
+		/* need read/modify/write of first changed EEPROM word */
+		/* only the second byte of the word is being modified */
+		ret_val = hw->nvm.ops.read(hw, first_word, 1,
+					    &eeprom_buff[0]);
+		ptr++;
+	}
+	if (((eeprom->offset + eeprom->len) & 1) && (ret_val == 0)) {
+		/* need read/modify/write of last changed EEPROM word */
+		/* only the first byte of the word is being modified */
+		ret_val = hw->nvm.ops.read(hw, last_word, 1,
+				   &eeprom_buff[last_word - first_word]);
+	}
+
+	/* Device's eeprom is always little-endian, word addressable */
+	for (i = 0; i < last_word - first_word + 1; i++)
+		le16_to_cpus(&eeprom_buff[i]);
+
+	memcpy(ptr, bytes, eeprom->len);
+
+	for (i = 0; i < last_word - first_word + 1; i++)
+		eeprom_buff[i] = cpu_to_le16(eeprom_buff[i]);
+
+	ret_val = hw->nvm.ops.write(hw, first_word,
+				     last_word - first_word + 1, eeprom_buff);
+
+	/* Update the checksum over the first part of the EEPROM if needed
+	 * and flush shadow RAM for 82573 controllers */
+	if ((ret_val == 0) && ((first_word <= NVM_CHECKSUM_REG)))
+		hw->nvm.ops.update(hw);
+
+	kfree(eeprom_buff);
+	return ret_val;
+}
+
+static void igb_get_drvinfo(struct net_device *netdev,
+			    struct ethtool_drvinfo *drvinfo)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	char firmware_version[32];
+	u16 eeprom_data;
+
+	strncpy(drvinfo->driver,  igb_driver_name, sizeof(drvinfo->driver) - 1);
+	strncpy(drvinfo->version, igb_driver_version,
+		sizeof(drvinfo->version) - 1);
+
+	/* EEPROM image version # is reported as firmware version # for
+	 * 82575 controllers */
+	adapter->hw.nvm.ops.read(&adapter->hw, 5, 1, &eeprom_data);
+	sprintf(firmware_version, "%d.%d-%d",
+		(eeprom_data & 0xF000) >> 12,
+		(eeprom_data & 0x0FF0) >> 4,
+		eeprom_data & 0x000F);
+
+	strncpy(drvinfo->fw_version, firmware_version,
+		sizeof(drvinfo->fw_version) - 1);
+	strncpy(drvinfo->bus_info, pci_name(adapter->pdev),
+		sizeof(drvinfo->bus_info) - 1);
+	drvinfo->n_stats = IGB_STATS_LEN;
+	drvinfo->testinfo_len = IGB_TEST_LEN;
+	drvinfo->regdump_len = igb_get_regs_len(netdev);
+	drvinfo->eedump_len = igb_get_eeprom_len(netdev);
+}
+
+static void igb_get_ringparam(struct net_device *netdev,
+			      struct ethtool_ringparam *ring)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+
+	ring->rx_max_pending = IGB_MAX_RXD;
+	ring->tx_max_pending = IGB_MAX_TXD;
+	ring->rx_pending = adapter->rx_ring_count;
+	ring->tx_pending = adapter->tx_ring_count;
+}
+
+static int igb_set_ringparam(struct net_device *netdev,
+			     struct ethtool_ringparam *ring)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct igb_ring *temp_ring;
+	int i, err = 0;
+	u16 new_rx_count, new_tx_count;
+
+	if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
+		return -EINVAL;
+
+	new_rx_count = min_t(u32, ring->rx_pending, IGB_MAX_RXD);
+	new_rx_count = max_t(u16, new_rx_count, IGB_MIN_RXD);
+	new_rx_count = ALIGN(new_rx_count, REQ_RX_DESCRIPTOR_MULTIPLE);
+
+	new_tx_count = min_t(u32, ring->tx_pending, IGB_MAX_TXD);
+	new_tx_count = max_t(u16, new_tx_count, IGB_MIN_TXD);
+	new_tx_count = ALIGN(new_tx_count, REQ_TX_DESCRIPTOR_MULTIPLE);
+
+	if ((new_tx_count == adapter->tx_ring_count) &&
+	    (new_rx_count == adapter->rx_ring_count)) {
+		/* nothing to do */
+		return 0;
+	}
+
+	while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
+		msleep(1);
+
+	if (!netif_running(adapter->netdev)) {
+		for (i = 0; i < adapter->num_tx_queues; i++)
+			adapter->tx_ring[i]->count = new_tx_count;
+		for (i = 0; i < adapter->num_rx_queues; i++)
+			adapter->rx_ring[i]->count = new_rx_count;
+		adapter->tx_ring_count = new_tx_count;
+		adapter->rx_ring_count = new_rx_count;
+		goto clear_reset;
+	}
+
+	if (adapter->num_tx_queues > adapter->num_rx_queues)
+		temp_ring = vmalloc(adapter->num_tx_queues * sizeof(struct igb_ring));
+	else
+		temp_ring = vmalloc(adapter->num_rx_queues * sizeof(struct igb_ring));
+
+	if (!temp_ring) {
+		err = -ENOMEM;
+		goto clear_reset;
+	}
+
+	igb_down(adapter);
+
+	/*
+	 * We can't just free everything and then setup again,
+	 * because the ISRs in MSI-X mode get passed pointers
+	 * to the tx and rx ring structs.
+	 */
+	if (new_tx_count != adapter->tx_ring_count) {
+		for (i = 0; i < adapter->num_tx_queues; i++) {
+			memcpy(&temp_ring[i], adapter->tx_ring[i],
+			       sizeof(struct igb_ring));
+
+			temp_ring[i].count = new_tx_count;
+			err = igb_setup_tx_resources(&temp_ring[i]);
+			if (err) {
+				while (i) {
+					i--;
+					igb_free_tx_resources(&temp_ring[i]);
+				}
+				goto err_setup;
+			}
+		}
+
+		for (i = 0; i < adapter->num_tx_queues; i++) {
+			igb_free_tx_resources(adapter->tx_ring[i]);
+
+			memcpy(adapter->tx_ring[i], &temp_ring[i],
+			       sizeof(struct igb_ring));
+		}
+
+		adapter->tx_ring_count = new_tx_count;
+	}
+
+	if (new_rx_count != adapter->rx_ring_count) {
+		for (i = 0; i < adapter->num_rx_queues; i++) {
+			memcpy(&temp_ring[i], adapter->rx_ring[i],
+			       sizeof(struct igb_ring));
+
+			temp_ring[i].count = new_rx_count;
+			err = igb_setup_rx_resources(&temp_ring[i]);
+			if (err) {
+				while (i) {
+					i--;
+					igb_free_rx_resources(&temp_ring[i]);
+				}
+				goto err_setup;
+			}
+
+		}
+
+		for (i = 0; i < adapter->num_rx_queues; i++) {
+			igb_free_rx_resources(adapter->rx_ring[i]);
+
+			memcpy(adapter->rx_ring[i], &temp_ring[i],
+			       sizeof(struct igb_ring));
+		}
+
+		adapter->rx_ring_count = new_rx_count;
+	}
+err_setup:
+	igb_up(adapter);
+	vfree(temp_ring);
+clear_reset:
+	clear_bit(__IGB_RESETTING, &adapter->state);
+	return err;
+}
+
+/* ethtool register test data */
+struct igb_reg_test {
+	u16 reg;
+	u16 reg_offset;
+	u16 array_len;
+	u16 test_type;
+	u32 mask;
+	u32 write;
+};
+
+/* In the hardware, registers are laid out either singly, in arrays
+ * spaced 0x100 bytes apart, or in contiguous tables.  We assume
+ * most tests take place on arrays or single registers (handled
+ * as a single-element array) and special-case the tables.
+ * Table tests are always pattern tests.
+ *
+ * We also make provision for some required setup steps by specifying
+ * registers to be written without any read-back testing.
+ */
+
+#define PATTERN_TEST	1
+#define SET_READ_TEST	2
+#define WRITE_NO_TEST	3
+#define TABLE32_TEST	4
+#define TABLE64_TEST_LO	5
+#define TABLE64_TEST_HI	6
+
+/* i350 reg test */
+static struct igb_reg_test reg_test_i350[] = {
+	{ E1000_FCAL,	   0x100, 1,  PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ E1000_FCAH,	   0x100, 1,  PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+	{ E1000_FCT,	   0x100, 1,  PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+	{ E1000_VET,	   0x100, 1,  PATTERN_TEST, 0xFFFF0000, 0xFFFF0000 },
+	{ E1000_RDBAL(0),  0x100, 4,  PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+	{ E1000_RDBAH(0),  0x100, 4,  PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ E1000_RDLEN(0),  0x100, 4,  PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+	{ E1000_RDBAL(4),  0x40,  4,  PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+	{ E1000_RDBAH(4),  0x40,  4,  PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ E1000_RDLEN(4),  0x40,  4,  PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+	/* RDH is read-only for i350, only test RDT. */
+	{ E1000_RDT(0),	   0x100, 4,  PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+	{ E1000_RDT(4),	   0x40,  4,  PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+	{ E1000_FCRTH,	   0x100, 1,  PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 },
+	{ E1000_FCTTV,	   0x100, 1,  PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+	{ E1000_TIPG,	   0x100, 1,  PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF },
+	{ E1000_TDBAL(0),  0x100, 4,  PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+	{ E1000_TDBAH(0),  0x100, 4,  PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ E1000_TDLEN(0),  0x100, 4,  PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+	{ E1000_TDBAL(4),  0x40,  4,  PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+	{ E1000_TDBAH(4),  0x40,  4,  PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ E1000_TDLEN(4),  0x40,  4,  PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+	{ E1000_TDT(0),	   0x100, 4,  PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+	{ E1000_TDT(4),	   0x40,  4,  PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+	{ E1000_RCTL,	   0x100, 1,  SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+	{ E1000_RCTL, 	   0x100, 1,  SET_READ_TEST, 0x04CFB0FE, 0x003FFFFB },
+	{ E1000_RCTL, 	   0x100, 1,  SET_READ_TEST, 0x04CFB0FE, 0xFFFFFFFF },
+	{ E1000_TCTL,	   0x100, 1,  SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+	{ E1000_RA,	   0, 16, TABLE64_TEST_LO,
+						0xFFFFFFFF, 0xFFFFFFFF },
+	{ E1000_RA,	   0, 16, TABLE64_TEST_HI,
+						0xC3FFFFFF, 0xFFFFFFFF },
+	{ E1000_RA2,	   0, 16, TABLE64_TEST_LO,
+						0xFFFFFFFF, 0xFFFFFFFF },
+	{ E1000_RA2,	   0, 16, TABLE64_TEST_HI,
+						0xC3FFFFFF, 0xFFFFFFFF },
+	{ E1000_MTA,	   0, 128, TABLE32_TEST,
+						0xFFFFFFFF, 0xFFFFFFFF },
+	{ 0, 0, 0, 0 }
+};
+
+/* 82580 reg test */
+static struct igb_reg_test reg_test_82580[] = {
+	{ E1000_FCAL,	   0x100, 1,  PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ E1000_FCAH,	   0x100, 1,  PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+	{ E1000_FCT,	   0x100, 1,  PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+	{ E1000_VET,	   0x100, 1,  PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ E1000_RDBAL(0),  0x100, 4,  PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+	{ E1000_RDBAH(0),  0x100, 4,  PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ E1000_RDLEN(0),  0x100, 4,  PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
+	{ E1000_RDBAL(4),  0x40,  4,  PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+	{ E1000_RDBAH(4),  0x40,  4,  PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ E1000_RDLEN(4),  0x40,  4,  PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
+	/* RDH is read-only for 82580, only test RDT. */
+	{ E1000_RDT(0),	   0x100, 4,  PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+	{ E1000_RDT(4),	   0x40,  4,  PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+	{ E1000_FCRTH,	   0x100, 1,  PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 },
+	{ E1000_FCTTV,	   0x100, 1,  PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+	{ E1000_TIPG,	   0x100, 1,  PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF },
+	{ E1000_TDBAL(0),  0x100, 4,  PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+	{ E1000_TDBAH(0),  0x100, 4,  PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ E1000_TDLEN(0),  0x100, 4,  PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
+	{ E1000_TDBAL(4),  0x40,  4,  PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+	{ E1000_TDBAH(4),  0x40,  4,  PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ E1000_TDLEN(4),  0x40,  4,  PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
+	{ E1000_TDT(0),	   0x100, 4,  PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+	{ E1000_TDT(4),	   0x40,  4,  PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+	{ E1000_RCTL,	   0x100, 1,  SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+	{ E1000_RCTL, 	   0x100, 1,  SET_READ_TEST, 0x04CFB0FE, 0x003FFFFB },
+	{ E1000_RCTL, 	   0x100, 1,  SET_READ_TEST, 0x04CFB0FE, 0xFFFFFFFF },
+	{ E1000_TCTL,	   0x100, 1,  SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+	{ E1000_RA,	   0, 16, TABLE64_TEST_LO,
+						0xFFFFFFFF, 0xFFFFFFFF },
+	{ E1000_RA,	   0, 16, TABLE64_TEST_HI,
+						0x83FFFFFF, 0xFFFFFFFF },
+	{ E1000_RA2,	   0, 8, TABLE64_TEST_LO,
+						0xFFFFFFFF, 0xFFFFFFFF },
+	{ E1000_RA2,	   0, 8, TABLE64_TEST_HI,
+						0x83FFFFFF, 0xFFFFFFFF },
+	{ E1000_MTA,	   0, 128, TABLE32_TEST,
+						0xFFFFFFFF, 0xFFFFFFFF },
+	{ 0, 0, 0, 0 }
+};
+
+/* 82576 reg test */
+static struct igb_reg_test reg_test_82576[] = {
+	{ E1000_FCAL,	   0x100, 1,  PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ E1000_FCAH,	   0x100, 1,  PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+	{ E1000_FCT,	   0x100, 1,  PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+	{ E1000_VET,	   0x100, 1,  PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ E1000_RDBAL(0),  0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+	{ E1000_RDBAH(0),  0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ E1000_RDLEN(0),  0x100, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
+	{ E1000_RDBAL(4),  0x40, 12, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+	{ E1000_RDBAH(4),  0x40, 12, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ E1000_RDLEN(4),  0x40, 12, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
+	/* Enable all RX queues before testing. */
+	{ E1000_RXDCTL(0), 0x100, 4,  WRITE_NO_TEST, 0, E1000_RXDCTL_QUEUE_ENABLE },
+	{ E1000_RXDCTL(4), 0x40, 12,  WRITE_NO_TEST, 0, E1000_RXDCTL_QUEUE_ENABLE },
+	/* RDH is read-only for 82576, only test RDT. */
+	{ E1000_RDT(0),	   0x100, 4,  PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+	{ E1000_RDT(4),	   0x40, 12,  PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+	{ E1000_RXDCTL(0), 0x100, 4,  WRITE_NO_TEST, 0, 0 },
+	{ E1000_RXDCTL(4), 0x40, 12,  WRITE_NO_TEST, 0, 0 },
+	{ E1000_FCRTH,	   0x100, 1,  PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 },
+	{ E1000_FCTTV,	   0x100, 1,  PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+	{ E1000_TIPG,	   0x100, 1,  PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF },
+	{ E1000_TDBAL(0),  0x100, 4,  PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+	{ E1000_TDBAH(0),  0x100, 4,  PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ E1000_TDLEN(0),  0x100, 4,  PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
+	{ E1000_TDBAL(4),  0x40, 12,  PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+	{ E1000_TDBAH(4),  0x40, 12,  PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ E1000_TDLEN(4),  0x40, 12,  PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
+	{ E1000_RCTL,	   0x100, 1,  SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+	{ E1000_RCTL, 	   0x100, 1,  SET_READ_TEST, 0x04CFB0FE, 0x003FFFFB },
+	{ E1000_RCTL, 	   0x100, 1,  SET_READ_TEST, 0x04CFB0FE, 0xFFFFFFFF },
+	{ E1000_TCTL,	   0x100, 1,  SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+	{ E1000_RA,	   0, 16, TABLE64_TEST_LO, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ E1000_RA,	   0, 16, TABLE64_TEST_HI, 0x83FFFFFF, 0xFFFFFFFF },
+	{ E1000_RA2,	   0, 8, TABLE64_TEST_LO, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ E1000_RA2,	   0, 8, TABLE64_TEST_HI, 0x83FFFFFF, 0xFFFFFFFF },
+	{ E1000_MTA,	   0, 128,TABLE32_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ 0, 0, 0, 0 }
+};
+
+/* 82575 register test */
+static struct igb_reg_test reg_test_82575[] = {
+	{ E1000_FCAL,      0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ E1000_FCAH,      0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+	{ E1000_FCT,       0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+	{ E1000_VET,       0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ E1000_RDBAL(0),  0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+	{ E1000_RDBAH(0),  0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ E1000_RDLEN(0),  0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+	/* Enable all four RX queues before testing. */
+	{ E1000_RXDCTL(0), 0x100, 4, WRITE_NO_TEST, 0, E1000_RXDCTL_QUEUE_ENABLE },
+	/* RDH is read-only for 82575, only test RDT. */
+	{ E1000_RDT(0),    0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+	{ E1000_RXDCTL(0), 0x100, 4, WRITE_NO_TEST, 0, 0 },
+	{ E1000_FCRTH,     0x100, 1, PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 },
+	{ E1000_FCTTV,     0x100, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+	{ E1000_TIPG,      0x100, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF },
+	{ E1000_TDBAL(0),  0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+	{ E1000_TDBAH(0),  0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ E1000_TDLEN(0),  0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+	{ E1000_RCTL,      0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+	{ E1000_RCTL,      0x100, 1, SET_READ_TEST, 0x04CFB3FE, 0x003FFFFB },
+	{ E1000_RCTL,      0x100, 1, SET_READ_TEST, 0x04CFB3FE, 0xFFFFFFFF },
+	{ E1000_TCTL,      0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+	{ E1000_TXCW,      0x100, 1, PATTERN_TEST, 0xC000FFFF, 0x0000FFFF },
+	{ E1000_RA,        0, 16, TABLE64_TEST_LO, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ E1000_RA,        0, 16, TABLE64_TEST_HI, 0x800FFFFF, 0xFFFFFFFF },
+	{ E1000_MTA,       0, 128, TABLE32_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ 0, 0, 0, 0 }
+};
+
+static bool reg_pattern_test(struct igb_adapter *adapter, u64 *data,
+			     int reg, u32 mask, u32 write)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 pat, val;
+	static const u32 _test[] =
+		{0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
+	for (pat = 0; pat < ARRAY_SIZE(_test); pat++) {
+		wr32(reg, (_test[pat] & write));
+		val = rd32(reg) & mask;
+		if (val != (_test[pat] & write & mask)) {
+			dev_err(&adapter->pdev->dev, "pattern test reg %04X "
+				"failed: got 0x%08X expected 0x%08X\n",
+				reg, val, (_test[pat] & write & mask));
+			*data = reg;
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+static bool reg_set_and_check(struct igb_adapter *adapter, u64 *data,
+			      int reg, u32 mask, u32 write)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 val;
+	wr32(reg, write & mask);
+	val = rd32(reg);
+	if ((write & mask) != (val & mask)) {
+		dev_err(&adapter->pdev->dev, "set/check reg %04X test failed:"
+			" got 0x%08X expected 0x%08X\n", reg,
+			(val & mask), (write & mask));
+		*data = reg;
+		return 1;
+	}
+
+	return 0;
+}
+
+#define REG_PATTERN_TEST(reg, mask, write) \
+	do { \
+		if (reg_pattern_test(adapter, data, reg, mask, write)) \
+			return 1; \
+	} while (0)
+
+#define REG_SET_AND_CHECK(reg, mask, write) \
+	do { \
+		if (reg_set_and_check(adapter, data, reg, mask, write)) \
+			return 1; \
+	} while (0)
+
+static int igb_reg_test(struct igb_adapter *adapter, u64 *data)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	struct igb_reg_test *test;
+	u32 value, before, after;
+	u32 i, toggle;
+
+	switch (adapter->hw.mac.type) {
+	case e1000_i350:
+		test = reg_test_i350;
+		toggle = 0x7FEFF3FF;
+		break;
+	case e1000_82580:
+		test = reg_test_82580;
+		toggle = 0x7FEFF3FF;
+		break;
+	case e1000_82576:
+		test = reg_test_82576;
+		toggle = 0x7FFFF3FF;
+		break;
+	default:
+		test = reg_test_82575;
+		toggle = 0x7FFFF3FF;
+		break;
+	}
+
+	/* Because the status register is such a special case,
+	 * we handle it separately from the rest of the register
+	 * tests.  Some bits are read-only, some toggle, and some
+	 * are writable on newer MACs.
+	 */
+	before = rd32(E1000_STATUS);
+	value = (rd32(E1000_STATUS) & toggle);
+	wr32(E1000_STATUS, toggle);
+	after = rd32(E1000_STATUS) & toggle;
+	if (value != after) {
+		dev_err(&adapter->pdev->dev, "failed STATUS register test "
+			"got: 0x%08X expected: 0x%08X\n", after, value);
+		*data = 1;
+		return 1;
+	}
+	/* restore previous status */
+	wr32(E1000_STATUS, before);
+
+	/* Perform the remainder of the register test, looping through
+	 * the test table until we either fail or reach the null entry.
+	 */
+	while (test->reg) {
+		for (i = 0; i < test->array_len; i++) {
+			switch (test->test_type) {
+			case PATTERN_TEST:
+				REG_PATTERN_TEST(test->reg +
+						(i * test->reg_offset),
+						test->mask,
+						test->write);
+				break;
+			case SET_READ_TEST:
+				REG_SET_AND_CHECK(test->reg +
+						(i * test->reg_offset),
+						test->mask,
+						test->write);
+				break;
+			case WRITE_NO_TEST:
+				writel(test->write,
+				    (adapter->hw.hw_addr + test->reg)
+					+ (i * test->reg_offset));
+				break;
+			case TABLE32_TEST:
+				REG_PATTERN_TEST(test->reg + (i * 4),
+						test->mask,
+						test->write);
+				break;
+			case TABLE64_TEST_LO:
+				REG_PATTERN_TEST(test->reg + (i * 8),
+						test->mask,
+						test->write);
+				break;
+			case TABLE64_TEST_HI:
+				REG_PATTERN_TEST((test->reg + 4) + (i * 8),
+						test->mask,
+						test->write);
+				break;
+			}
+		}
+		test++;
+	}
+
+	*data = 0;
+	return 0;
+}
+
+static int igb_eeprom_test(struct igb_adapter *adapter, u64 *data)
+{
+	u16 temp;
+	u16 checksum = 0;
+	u16 i;
+
+	*data = 0;
+	/* Read and add up the contents of the EEPROM */
+	for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) {
+		if ((adapter->hw.nvm.ops.read(&adapter->hw, i, 1, &temp)) < 0) {
+			*data = 1;
+			break;
+		}
+		checksum += temp;
+	}
+
+	/* If Checksum is not Correct return error else test passed */
+	if ((checksum != (u16) NVM_SUM) && !(*data))
+		*data = 2;
+
+	return *data;
+}
+
+static irqreturn_t igb_test_intr(int irq, void *data)
+{
+	struct igb_adapter *adapter = (struct igb_adapter *) data;
+	struct e1000_hw *hw = &adapter->hw;
+
+	adapter->test_icr |= rd32(E1000_ICR);
+
+	return IRQ_HANDLED;
+}
+
+static int igb_intr_test(struct igb_adapter *adapter, u64 *data)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	struct net_device *netdev = adapter->netdev;
+	u32 mask, ics_mask, i = 0, shared_int = true;
+	u32 irq = adapter->pdev->irq;
+
+	*data = 0;
+
+	/* Hook up test interrupt handler just for this test */
+	if (adapter->msix_entries) {
+		if (request_irq(adapter->msix_entries[0].vector,
+		                igb_test_intr, 0, netdev->name, adapter)) {
+			*data = 1;
+			return -1;
+		}
+	} else if (adapter->flags & IGB_FLAG_HAS_MSI) {
+		shared_int = false;
+		if (request_irq(irq,
+		                igb_test_intr, 0, netdev->name, adapter)) {
+			*data = 1;
+			return -1;
+		}
+	} else if (!request_irq(irq, igb_test_intr, IRQF_PROBE_SHARED,
+				netdev->name, adapter)) {
+		shared_int = false;
+	} else if (request_irq(irq, igb_test_intr, IRQF_SHARED,
+		 netdev->name, adapter)) {
+		*data = 1;
+		return -1;
+	}
+	dev_info(&adapter->pdev->dev, "testing %s interrupt\n",
+		(shared_int ? "shared" : "unshared"));
+
+	/* Disable all the interrupts */
+	wr32(E1000_IMC, ~0);
+	wrfl();
+	msleep(10);
+
+	/* Define all writable bits for ICS */
+	switch (hw->mac.type) {
+	case e1000_82575:
+		ics_mask = 0x37F47EDD;
+		break;
+	case e1000_82576:
+		ics_mask = 0x77D4FBFD;
+		break;
+	case e1000_82580:
+		ics_mask = 0x77DCFED5;
+		break;
+	case e1000_i350:
+		ics_mask = 0x77DCFED5;
+		break;
+	default:
+		ics_mask = 0x7FFFFFFF;
+		break;
+	}
+
+	/* Test each interrupt */
+	for (; i < 31; i++) {
+		/* Interrupt to test */
+		mask = 1 << i;
+
+		if (!(mask & ics_mask))
+			continue;
+
+		if (!shared_int) {
+			/* Disable the interrupt to be reported in
+			 * the cause register and then force the same
+			 * interrupt and see if one gets posted.  If
+			 * an interrupt was posted to the bus, the
+			 * test failed.
+			 */
+			adapter->test_icr = 0;
+
+			/* Flush any pending interrupts */
+			wr32(E1000_ICR, ~0);
+
+			wr32(E1000_IMC, mask);
+			wr32(E1000_ICS, mask);
+			wrfl();
+			msleep(10);
+
+			if (adapter->test_icr & mask) {
+				*data = 3;
+				break;
+			}
+		}
+
+		/* Enable the interrupt to be reported in
+		 * the cause register and then force the same
+		 * interrupt and see if one gets posted.  If
+		 * an interrupt was not posted to the bus, the
+		 * test failed.
+		 */
+		adapter->test_icr = 0;
+
+		/* Flush any pending interrupts */
+		wr32(E1000_ICR, ~0);
+
+		wr32(E1000_IMS, mask);
+		wr32(E1000_ICS, mask);
+		wrfl();
+		msleep(10);
+
+		if (!(adapter->test_icr & mask)) {
+			*data = 4;
+			break;
+		}
+
+		if (!shared_int) {
+			/* Disable the other interrupts to be reported in
+			 * the cause register and then force the other
+			 * interrupts and see if any get posted.  If
+			 * an interrupt was posted to the bus, the
+			 * test failed.
+			 */
+			adapter->test_icr = 0;
+
+			/* Flush any pending interrupts */
+			wr32(E1000_ICR, ~0);
+
+			wr32(E1000_IMC, ~mask);
+			wr32(E1000_ICS, ~mask);
+			wrfl();
+			msleep(10);
+
+			if (adapter->test_icr & mask) {
+				*data = 5;
+				break;
+			}
+		}
+	}
+
+	/* Disable all the interrupts */
+	wr32(E1000_IMC, ~0);
+	wrfl();
+	msleep(10);
+
+	/* Unhook test interrupt handler */
+	if (adapter->msix_entries)
+		free_irq(adapter->msix_entries[0].vector, adapter);
+	else
+		free_irq(irq, adapter);
+
+	return *data;
+}
+
+static void igb_free_desc_rings(struct igb_adapter *adapter)
+{
+	igb_free_tx_resources(&adapter->test_tx_ring);
+	igb_free_rx_resources(&adapter->test_rx_ring);
+}
+
+static int igb_setup_desc_rings(struct igb_adapter *adapter)
+{
+	struct igb_ring *tx_ring = &adapter->test_tx_ring;
+	struct igb_ring *rx_ring = &adapter->test_rx_ring;
+	struct e1000_hw *hw = &adapter->hw;
+	int ret_val;
+
+	/* Setup Tx descriptor ring and Tx buffers */
+	tx_ring->count = IGB_DEFAULT_TXD;
+	tx_ring->dev = &adapter->pdev->dev;
+	tx_ring->netdev = adapter->netdev;
+	tx_ring->reg_idx = adapter->vfs_allocated_count;
+
+	if (igb_setup_tx_resources(tx_ring)) {
+		ret_val = 1;
+		goto err_nomem;
+	}
+
+	igb_setup_tctl(adapter);
+	igb_configure_tx_ring(adapter, tx_ring);
+
+	/* Setup Rx descriptor ring and Rx buffers */
+	rx_ring->count = IGB_DEFAULT_RXD;
+	rx_ring->dev = &adapter->pdev->dev;
+	rx_ring->netdev = adapter->netdev;
+	rx_ring->reg_idx = adapter->vfs_allocated_count;
+
+	if (igb_setup_rx_resources(rx_ring)) {
+		ret_val = 3;
+		goto err_nomem;
+	}
+
+	/* set the default queue to queue 0 of PF */
+	wr32(E1000_MRQC, adapter->vfs_allocated_count << 3);
+
+	/* enable receive ring */
+	igb_setup_rctl(adapter);
+	igb_configure_rx_ring(adapter, rx_ring);
+
+	igb_alloc_rx_buffers(rx_ring, igb_desc_unused(rx_ring));
+
+	return 0;
+
+err_nomem:
+	igb_free_desc_rings(adapter);
+	return ret_val;
+}
+
+static void igb_phy_disable_receiver(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+
+	/* Write out to PHY registers 29 and 30 to disable the Receiver. */
+	igb_write_phy_reg(hw, 29, 0x001F);
+	igb_write_phy_reg(hw, 30, 0x8FFC);
+	igb_write_phy_reg(hw, 29, 0x001A);
+	igb_write_phy_reg(hw, 30, 0x8FF0);
+}
+
+static int igb_integrated_phy_loopback(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 ctrl_reg = 0;
+
+	hw->mac.autoneg = false;
+
+	if (hw->phy.type == e1000_phy_m88) {
+		/* Auto-MDI/MDIX Off */
+		igb_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, 0x0808);
+		/* reset to update Auto-MDI/MDIX */
+		igb_write_phy_reg(hw, PHY_CONTROL, 0x9140);
+		/* autoneg off */
+		igb_write_phy_reg(hw, PHY_CONTROL, 0x8140);
+	} else if (hw->phy.type == e1000_phy_82580) {
+		/* enable MII loopback */
+		igb_write_phy_reg(hw, I82580_PHY_LBK_CTRL, 0x8041);
+	}
+
+	ctrl_reg = rd32(E1000_CTRL);
+
+	/* force 1000, set loopback */
+	igb_write_phy_reg(hw, PHY_CONTROL, 0x4140);
+
+	/* Now set up the MAC to the same speed/duplex as the PHY. */
+	ctrl_reg = rd32(E1000_CTRL);
+	ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
+	ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
+		     E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
+		     E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
+		     E1000_CTRL_FD |	 /* Force Duplex to FULL */
+		     E1000_CTRL_SLU);	 /* Set link up enable bit */
+
+	if (hw->phy.type == e1000_phy_m88)
+		ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */
+
+	wr32(E1000_CTRL, ctrl_reg);
+
+	/* Disable the receiver on the PHY so when a cable is plugged in, the
+	 * PHY does not begin to autoneg when a cable is reconnected to the NIC.
+	 */
+	if (hw->phy.type == e1000_phy_m88)
+		igb_phy_disable_receiver(adapter);
+
+	udelay(500);
+
+	return 0;
+}
+
+static int igb_set_phy_loopback(struct igb_adapter *adapter)
+{
+	return igb_integrated_phy_loopback(adapter);
+}
+
+static int igb_setup_loopback_test(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 reg;
+
+	reg = rd32(E1000_CTRL_EXT);
+
+	/* use CTRL_EXT to identify link type as SGMII can appear as copper */
+	if (reg & E1000_CTRL_EXT_LINK_MODE_MASK) {
+		if ((hw->device_id == E1000_DEV_ID_DH89XXCC_SGMII) ||
+		(hw->device_id == E1000_DEV_ID_DH89XXCC_SERDES) ||
+		(hw->device_id == E1000_DEV_ID_DH89XXCC_BACKPLANE) ||
+		(hw->device_id == E1000_DEV_ID_DH89XXCC_SFP)) {
+
+			/* Enable DH89xxCC MPHY for near end loopback */
+			reg = rd32(E1000_MPHY_ADDR_CTL);
+			reg = (reg & E1000_MPHY_ADDR_CTL_OFFSET_MASK) |
+			E1000_MPHY_PCS_CLK_REG_OFFSET;
+			wr32(E1000_MPHY_ADDR_CTL, reg);
+
+			reg = rd32(E1000_MPHY_DATA);
+			reg |= E1000_MPHY_PCS_CLK_REG_DIGINELBEN;
+			wr32(E1000_MPHY_DATA, reg);
+		}
+
+		reg = rd32(E1000_RCTL);
+		reg |= E1000_RCTL_LBM_TCVR;
+		wr32(E1000_RCTL, reg);
+
+		wr32(E1000_SCTL, E1000_ENABLE_SERDES_LOOPBACK);
+
+		reg = rd32(E1000_CTRL);
+		reg &= ~(E1000_CTRL_RFCE |
+			 E1000_CTRL_TFCE |
+			 E1000_CTRL_LRST);
+		reg |= E1000_CTRL_SLU |
+		       E1000_CTRL_FD;
+		wr32(E1000_CTRL, reg);
+
+		/* Unset switch control to serdes energy detect */
+		reg = rd32(E1000_CONNSW);
+		reg &= ~E1000_CONNSW_ENRGSRC;
+		wr32(E1000_CONNSW, reg);
+
+		/* Set PCS register for forced speed */
+		reg = rd32(E1000_PCS_LCTL);
+		reg &= ~E1000_PCS_LCTL_AN_ENABLE;     /* Disable Autoneg*/
+		reg |= E1000_PCS_LCTL_FLV_LINK_UP |   /* Force link up */
+		       E1000_PCS_LCTL_FSV_1000 |      /* Force 1000    */
+		       E1000_PCS_LCTL_FDV_FULL |      /* SerDes Full duplex */
+		       E1000_PCS_LCTL_FSD |           /* Force Speed */
+		       E1000_PCS_LCTL_FORCE_LINK;     /* Force Link */
+		wr32(E1000_PCS_LCTL, reg);
+
+		return 0;
+	}
+
+	return igb_set_phy_loopback(adapter);
+}
+
+static void igb_loopback_cleanup(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 rctl;
+	u16 phy_reg;
+
+	if ((hw->device_id == E1000_DEV_ID_DH89XXCC_SGMII) ||
+	(hw->device_id == E1000_DEV_ID_DH89XXCC_SERDES) ||
+	(hw->device_id == E1000_DEV_ID_DH89XXCC_BACKPLANE) ||
+	(hw->device_id == E1000_DEV_ID_DH89XXCC_SFP)) {
+		u32 reg;
+
+		/* Disable near end loopback on DH89xxCC */
+		reg = rd32(E1000_MPHY_ADDR_CTL);
+		reg = (reg & E1000_MPHY_ADDR_CTL_OFFSET_MASK) |
+		E1000_MPHY_PCS_CLK_REG_OFFSET;
+		wr32(E1000_MPHY_ADDR_CTL, reg);
+
+		reg = rd32(E1000_MPHY_DATA);
+		reg &= ~E1000_MPHY_PCS_CLK_REG_DIGINELBEN;
+		wr32(E1000_MPHY_DATA, reg);
+	}
+
+	rctl = rd32(E1000_RCTL);
+	rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC);
+	wr32(E1000_RCTL, rctl);
+
+	hw->mac.autoneg = true;
+	igb_read_phy_reg(hw, PHY_CONTROL, &phy_reg);
+	if (phy_reg & MII_CR_LOOPBACK) {
+		phy_reg &= ~MII_CR_LOOPBACK;
+		igb_write_phy_reg(hw, PHY_CONTROL, phy_reg);
+		igb_phy_sw_reset(hw);
+	}
+}
+
+static void igb_create_lbtest_frame(struct sk_buff *skb,
+				    unsigned int frame_size)
+{
+	memset(skb->data, 0xFF, frame_size);
+	frame_size /= 2;
+	memset(&skb->data[frame_size], 0xAA, frame_size - 1);
+	memset(&skb->data[frame_size + 10], 0xBE, 1);
+	memset(&skb->data[frame_size + 12], 0xAF, 1);
+}
+
+static int igb_check_lbtest_frame(struct sk_buff *skb, unsigned int frame_size)
+{
+	frame_size /= 2;
+	if (*(skb->data + 3) == 0xFF) {
+		if ((*(skb->data + frame_size + 10) == 0xBE) &&
+		   (*(skb->data + frame_size + 12) == 0xAF)) {
+			return 0;
+		}
+	}
+	return 13;
+}
+
+static int igb_clean_test_rings(struct igb_ring *rx_ring,
+                                struct igb_ring *tx_ring,
+                                unsigned int size)
+{
+	union e1000_adv_rx_desc *rx_desc;
+	struct igb_rx_buffer *rx_buffer_info;
+	struct igb_tx_buffer *tx_buffer_info;
+	u16 rx_ntc, tx_ntc, count = 0;
+
+	/* initialize next to clean and descriptor values */
+	rx_ntc = rx_ring->next_to_clean;
+	tx_ntc = tx_ring->next_to_clean;
+	rx_desc = IGB_RX_DESC(rx_ring, rx_ntc);
+
+	while (igb_test_staterr(rx_desc, E1000_RXD_STAT_DD)) {
+		/* check rx buffer */
+		rx_buffer_info = &rx_ring->rx_buffer_info[rx_ntc];
+
+		/* unmap rx buffer, will be remapped by alloc_rx_buffers */
+		dma_unmap_single(rx_ring->dev,
+				 rx_buffer_info->dma,
+				 IGB_RX_HDR_LEN,
+				 DMA_FROM_DEVICE);
+		rx_buffer_info->dma = 0;
+
+		/* verify contents of skb */
+		if (!igb_check_lbtest_frame(rx_buffer_info->skb, size))
+			count++;
+
+		/* unmap buffer on tx side */
+		tx_buffer_info = &tx_ring->tx_buffer_info[tx_ntc];
+		igb_unmap_and_free_tx_resource(tx_ring, tx_buffer_info);
+
+		/* increment rx/tx next to clean counters */
+		rx_ntc++;
+		if (rx_ntc == rx_ring->count)
+			rx_ntc = 0;
+		tx_ntc++;
+		if (tx_ntc == tx_ring->count)
+			tx_ntc = 0;
+
+		/* fetch next descriptor */
+		rx_desc = IGB_RX_DESC(rx_ring, rx_ntc);
+	}
+
+	/* re-map buffers to ring, store next to clean values */
+	igb_alloc_rx_buffers(rx_ring, count);
+	rx_ring->next_to_clean = rx_ntc;
+	tx_ring->next_to_clean = tx_ntc;
+
+	return count;
+}
+
+static int igb_run_loopback_test(struct igb_adapter *adapter)
+{
+	struct igb_ring *tx_ring = &adapter->test_tx_ring;
+	struct igb_ring *rx_ring = &adapter->test_rx_ring;
+	u16 i, j, lc, good_cnt;
+	int ret_val = 0;
+	unsigned int size = IGB_RX_HDR_LEN;
+	netdev_tx_t tx_ret_val;
+	struct sk_buff *skb;
+
+	/* allocate test skb */
+	skb = alloc_skb(size, GFP_KERNEL);
+	if (!skb)
+		return 11;
+
+	/* place data into test skb */
+	igb_create_lbtest_frame(skb, size);
+	skb_put(skb, size);
+
+	/*
+	 * Calculate the loop count based on the largest descriptor ring
+	 * The idea is to wrap the largest ring a number of times using 64
+	 * send/receive pairs during each loop
+	 */
+
+	if (rx_ring->count <= tx_ring->count)
+		lc = ((tx_ring->count / 64) * 2) + 1;
+	else
+		lc = ((rx_ring->count / 64) * 2) + 1;
+
+	for (j = 0; j <= lc; j++) { /* loop count loop */
+		/* reset count of good packets */
+		good_cnt = 0;
+
+		/* place 64 packets on the transmit queue*/
+		for (i = 0; i < 64; i++) {
+			skb_get(skb);
+			tx_ret_val = igb_xmit_frame_ring(skb, tx_ring);
+			if (tx_ret_val == NETDEV_TX_OK)
+				good_cnt++;
+		}
+
+		if (good_cnt != 64) {
+			ret_val = 12;
+			break;
+		}
+
+		/* allow 200 milliseconds for packets to go from tx to rx */
+		msleep(200);
+
+		good_cnt = igb_clean_test_rings(rx_ring, tx_ring, size);
+		if (good_cnt != 64) {
+			ret_val = 13;
+			break;
+		}
+	} /* end loop count loop */
+
+	/* free the original skb */
+	kfree_skb(skb);
+
+	return ret_val;
+}
+
+static int igb_loopback_test(struct igb_adapter *adapter, u64 *data)
+{
+	/* PHY loopback cannot be performed if SoL/IDER
+	 * sessions are active */
+	if (igb_check_reset_block(&adapter->hw)) {
+		dev_err(&adapter->pdev->dev,
+			"Cannot do PHY loopback test "
+			"when SoL/IDER is active.\n");
+		*data = 0;
+		goto out;
+	}
+	*data = igb_setup_desc_rings(adapter);
+	if (*data)
+		goto out;
+	*data = igb_setup_loopback_test(adapter);
+	if (*data)
+		goto err_loopback;
+	*data = igb_run_loopback_test(adapter);
+	igb_loopback_cleanup(adapter);
+
+err_loopback:
+	igb_free_desc_rings(adapter);
+out:
+	return *data;
+}
+
+static int igb_link_test(struct igb_adapter *adapter, u64 *data)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	*data = 0;
+	if (hw->phy.media_type == e1000_media_type_internal_serdes) {
+		int i = 0;
+		hw->mac.serdes_has_link = false;
+
+		/* On some blade server designs, link establishment
+		 * could take as long as 2-3 minutes */
+		do {
+			hw->mac.ops.check_for_link(&adapter->hw);
+			if (hw->mac.serdes_has_link)
+				return *data;
+			msleep(20);
+		} while (i++ < 3750);
+
+		*data = 1;
+	} else {
+		hw->mac.ops.check_for_link(&adapter->hw);
+		if (hw->mac.autoneg)
+			msleep(4000);
+
+		if (!(rd32(E1000_STATUS) & E1000_STATUS_LU))
+			*data = 1;
+	}
+	return *data;
+}
+
+static void igb_diag_test(struct net_device *netdev,
+			  struct ethtool_test *eth_test, u64 *data)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	u16 autoneg_advertised;
+	u8 forced_speed_duplex, autoneg;
+	bool if_running = netif_running(netdev);
+
+	set_bit(__IGB_TESTING, &adapter->state);
+	if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
+		/* Offline tests */
+
+		/* save speed, duplex, autoneg settings */
+		autoneg_advertised = adapter->hw.phy.autoneg_advertised;
+		forced_speed_duplex = adapter->hw.mac.forced_speed_duplex;
+		autoneg = adapter->hw.mac.autoneg;
+
+		dev_info(&adapter->pdev->dev, "offline testing starting\n");
+
+		/* power up link for link test */
+		igb_power_up_link(adapter);
+
+		/* Link test performed before hardware reset so autoneg doesn't
+		 * interfere with test result */
+		if (igb_link_test(adapter, &data[4]))
+			eth_test->flags |= ETH_TEST_FL_FAILED;
+
+		if (if_running)
+			/* indicate we're in test mode */
+			dev_close(netdev);
+		else
+			igb_reset(adapter);
+
+		if (igb_reg_test(adapter, &data[0]))
+			eth_test->flags |= ETH_TEST_FL_FAILED;
+
+		igb_reset(adapter);
+		if (igb_eeprom_test(adapter, &data[1]))
+			eth_test->flags |= ETH_TEST_FL_FAILED;
+
+		igb_reset(adapter);
+		if (igb_intr_test(adapter, &data[2]))
+			eth_test->flags |= ETH_TEST_FL_FAILED;
+
+		igb_reset(adapter);
+		/* power up link for loopback test */
+		igb_power_up_link(adapter);
+		if (igb_loopback_test(adapter, &data[3]))
+			eth_test->flags |= ETH_TEST_FL_FAILED;
+
+		/* restore speed, duplex, autoneg settings */
+		adapter->hw.phy.autoneg_advertised = autoneg_advertised;
+		adapter->hw.mac.forced_speed_duplex = forced_speed_duplex;
+		adapter->hw.mac.autoneg = autoneg;
+
+		/* force this routine to wait until autoneg complete/timeout */
+		adapter->hw.phy.autoneg_wait_to_complete = true;
+		igb_reset(adapter);
+		adapter->hw.phy.autoneg_wait_to_complete = false;
+
+		clear_bit(__IGB_TESTING, &adapter->state);
+		if (if_running)
+			dev_open(netdev);
+	} else {
+		dev_info(&adapter->pdev->dev, "online testing starting\n");
+
+		/* PHY is powered down when interface is down */
+		if (if_running && igb_link_test(adapter, &data[4]))
+			eth_test->flags |= ETH_TEST_FL_FAILED;
+		else
+			data[4] = 0;
+
+		/* Online tests aren't run; pass by default */
+		data[0] = 0;
+		data[1] = 0;
+		data[2] = 0;
+		data[3] = 0;
+
+		clear_bit(__IGB_TESTING, &adapter->state);
+	}
+	msleep_interruptible(4 * 1000);
+}
+
+static int igb_wol_exclusion(struct igb_adapter *adapter,
+			     struct ethtool_wolinfo *wol)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	int retval = 1; /* fail by default */
+
+	switch (hw->device_id) {
+	case E1000_DEV_ID_82575GB_QUAD_COPPER:
+		/* WoL not supported */
+		wol->supported = 0;
+		break;
+	case E1000_DEV_ID_82575EB_FIBER_SERDES:
+	case E1000_DEV_ID_82576_FIBER:
+	case E1000_DEV_ID_82576_SERDES:
+		/* Wake events not supported on port B */
+		if (rd32(E1000_STATUS) & E1000_STATUS_FUNC_1) {
+			wol->supported = 0;
+			break;
+		}
+		/* return success for non excluded adapter ports */
+		retval = 0;
+		break;
+	case E1000_DEV_ID_82576_QUAD_COPPER:
+	case E1000_DEV_ID_82576_QUAD_COPPER_ET2:
+		/* quad port adapters only support WoL on port A */
+		if (!(adapter->flags & IGB_FLAG_QUAD_PORT_A)) {
+			wol->supported = 0;
+			break;
+		}
+		/* return success for non excluded adapter ports */
+		retval = 0;
+		break;
+	default:
+		/* dual port cards only support WoL on port A from now on
+		 * unless it was enabled in the eeprom for port B
+		 * so exclude FUNC_1 ports from having WoL enabled */
+		if ((rd32(E1000_STATUS) & E1000_STATUS_FUNC_MASK) &&
+		    !adapter->eeprom_wol) {
+			wol->supported = 0;
+			break;
+		}
+
+		retval = 0;
+	}
+
+	return retval;
+}
+
+static void igb_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+
+	wol->supported = WAKE_UCAST | WAKE_MCAST |
+	                 WAKE_BCAST | WAKE_MAGIC |
+	                 WAKE_PHY;
+	wol->wolopts = 0;
+
+	/* this function will set ->supported = 0 and return 1 if wol is not
+	 * supported by this hardware */
+	if (igb_wol_exclusion(adapter, wol) ||
+	    !device_can_wakeup(&adapter->pdev->dev))
+		return;
+
+	/* apply any specific unsupported masks here */
+	switch (adapter->hw.device_id) {
+	default:
+		break;
+	}
+
+	if (adapter->wol & E1000_WUFC_EX)
+		wol->wolopts |= WAKE_UCAST;
+	if (adapter->wol & E1000_WUFC_MC)
+		wol->wolopts |= WAKE_MCAST;
+	if (adapter->wol & E1000_WUFC_BC)
+		wol->wolopts |= WAKE_BCAST;
+	if (adapter->wol & E1000_WUFC_MAG)
+		wol->wolopts |= WAKE_MAGIC;
+	if (adapter->wol & E1000_WUFC_LNKC)
+		wol->wolopts |= WAKE_PHY;
+}
+
+static int igb_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+
+	if (wol->wolopts & (WAKE_ARP | WAKE_MAGICSECURE))
+		return -EOPNOTSUPP;
+
+	if (igb_wol_exclusion(adapter, wol) ||
+	    !device_can_wakeup(&adapter->pdev->dev))
+		return wol->wolopts ? -EOPNOTSUPP : 0;
+
+	/* these settings will always override what we currently have */
+	adapter->wol = 0;
+
+	if (wol->wolopts & WAKE_UCAST)
+		adapter->wol |= E1000_WUFC_EX;
+	if (wol->wolopts & WAKE_MCAST)
+		adapter->wol |= E1000_WUFC_MC;
+	if (wol->wolopts & WAKE_BCAST)
+		adapter->wol |= E1000_WUFC_BC;
+	if (wol->wolopts & WAKE_MAGIC)
+		adapter->wol |= E1000_WUFC_MAG;
+	if (wol->wolopts & WAKE_PHY)
+		adapter->wol |= E1000_WUFC_LNKC;
+	device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
+	return 0;
+}
+
+/* bit defines for adapter->led_status */
+#define IGB_LED_ON		0
+
+static int igb_set_phys_id(struct net_device *netdev,
+			   enum ethtool_phys_id_state state)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+
+	switch (state) {
+	case ETHTOOL_ID_ACTIVE:
+		igb_blink_led(hw);
+		return 2;
+	case ETHTOOL_ID_ON:
+		igb_blink_led(hw);
+		break;
+	case ETHTOOL_ID_OFF:
+		igb_led_off(hw);
+		break;
+	case ETHTOOL_ID_INACTIVE:
+		igb_led_off(hw);
+		clear_bit(IGB_LED_ON, &adapter->led_status);
+		igb_cleanup_led(hw);
+		break;
+	}
+
+	return 0;
+}
+
+static int igb_set_coalesce(struct net_device *netdev,
+			    struct ethtool_coalesce *ec)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	int i;
+
+	if ((ec->rx_coalesce_usecs > IGB_MAX_ITR_USECS) ||
+	    ((ec->rx_coalesce_usecs > 3) &&
+	     (ec->rx_coalesce_usecs < IGB_MIN_ITR_USECS)) ||
+	    (ec->rx_coalesce_usecs == 2))
+		return -EINVAL;
+
+	if ((ec->tx_coalesce_usecs > IGB_MAX_ITR_USECS) ||
+	    ((ec->tx_coalesce_usecs > 3) &&
+	     (ec->tx_coalesce_usecs < IGB_MIN_ITR_USECS)) ||
+	    (ec->tx_coalesce_usecs == 2))
+		return -EINVAL;
+
+	if ((adapter->flags & IGB_FLAG_QUEUE_PAIRS) && ec->tx_coalesce_usecs)
+		return -EINVAL;
+
+	/* If ITR is disabled, disable DMAC */
+	if (ec->rx_coalesce_usecs == 0) {
+		if (adapter->flags & IGB_FLAG_DMAC)
+			adapter->flags &= ~IGB_FLAG_DMAC;
+	}
+
+	/* convert to rate of irq's per second */
+	if (ec->rx_coalesce_usecs && ec->rx_coalesce_usecs <= 3)
+		adapter->rx_itr_setting = ec->rx_coalesce_usecs;
+	else
+		adapter->rx_itr_setting = ec->rx_coalesce_usecs << 2;
+
+	/* convert to rate of irq's per second */
+	if (adapter->flags & IGB_FLAG_QUEUE_PAIRS)
+		adapter->tx_itr_setting = adapter->rx_itr_setting;
+	else if (ec->tx_coalesce_usecs && ec->tx_coalesce_usecs <= 3)
+		adapter->tx_itr_setting = ec->tx_coalesce_usecs;
+	else
+		adapter->tx_itr_setting = ec->tx_coalesce_usecs << 2;
+
+	for (i = 0; i < adapter->num_q_vectors; i++) {
+		struct igb_q_vector *q_vector = adapter->q_vector[i];
+		q_vector->tx.work_limit = adapter->tx_work_limit;
+		if (q_vector->rx.ring)
+			q_vector->itr_val = adapter->rx_itr_setting;
+		else
+			q_vector->itr_val = adapter->tx_itr_setting;
+		if (q_vector->itr_val && q_vector->itr_val <= 3)
+			q_vector->itr_val = IGB_START_ITR;
+		q_vector->set_itr = 1;
+	}
+
+	return 0;
+}
+
+static int igb_get_coalesce(struct net_device *netdev,
+			    struct ethtool_coalesce *ec)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+
+	if (adapter->rx_itr_setting <= 3)
+		ec->rx_coalesce_usecs = adapter->rx_itr_setting;
+	else
+		ec->rx_coalesce_usecs = adapter->rx_itr_setting >> 2;
+
+	if (!(adapter->flags & IGB_FLAG_QUEUE_PAIRS)) {
+		if (adapter->tx_itr_setting <= 3)
+			ec->tx_coalesce_usecs = adapter->tx_itr_setting;
+		else
+			ec->tx_coalesce_usecs = adapter->tx_itr_setting >> 2;
+	}
+
+	return 0;
+}
+
+static int igb_nway_reset(struct net_device *netdev)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	if (netif_running(netdev))
+		igb_reinit_locked(adapter);
+	return 0;
+}
+
+static int igb_get_sset_count(struct net_device *netdev, int sset)
+{
+	switch (sset) {
+	case ETH_SS_STATS:
+		return IGB_STATS_LEN;
+	case ETH_SS_TEST:
+		return IGB_TEST_LEN;
+	default:
+		return -ENOTSUPP;
+	}
+}
+
+static void igb_get_ethtool_stats(struct net_device *netdev,
+				  struct ethtool_stats *stats, u64 *data)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct rtnl_link_stats64 *net_stats = &adapter->stats64;
+	unsigned int start;
+	struct igb_ring *ring;
+	int i, j;
+	char *p;
+
+	spin_lock(&adapter->stats64_lock);
+	igb_update_stats(adapter, net_stats);
+
+	for (i = 0; i < IGB_GLOBAL_STATS_LEN; i++) {
+		p = (char *)adapter + igb_gstrings_stats[i].stat_offset;
+		data[i] = (igb_gstrings_stats[i].sizeof_stat ==
+			sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
+	}
+	for (j = 0; j < IGB_NETDEV_STATS_LEN; j++, i++) {
+		p = (char *)net_stats + igb_gstrings_net_stats[j].stat_offset;
+		data[i] = (igb_gstrings_net_stats[j].sizeof_stat ==
+			sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
+	}
+	for (j = 0; j < adapter->num_tx_queues; j++) {
+		u64	restart2;
+
+		ring = adapter->tx_ring[j];
+		do {
+			start = u64_stats_fetch_begin_bh(&ring->tx_syncp);
+			data[i]   = ring->tx_stats.packets;
+			data[i+1] = ring->tx_stats.bytes;
+			data[i+2] = ring->tx_stats.restart_queue;
+		} while (u64_stats_fetch_retry_bh(&ring->tx_syncp, start));
+		do {
+			start = u64_stats_fetch_begin_bh(&ring->tx_syncp2);
+			restart2  = ring->tx_stats.restart_queue2;
+		} while (u64_stats_fetch_retry_bh(&ring->tx_syncp2, start));
+		data[i+2] += restart2;
+
+		i += IGB_TX_QUEUE_STATS_LEN;
+	}
+	for (j = 0; j < adapter->num_rx_queues; j++) {
+		ring = adapter->rx_ring[j];
+		do {
+			start = u64_stats_fetch_begin_bh(&ring->rx_syncp);
+			data[i]   = ring->rx_stats.packets;
+			data[i+1] = ring->rx_stats.bytes;
+			data[i+2] = ring->rx_stats.drops;
+			data[i+3] = ring->rx_stats.csum_err;
+			data[i+4] = ring->rx_stats.alloc_failed;
+		} while (u64_stats_fetch_retry_bh(&ring->rx_syncp, start));
+		i += IGB_RX_QUEUE_STATS_LEN;
+	}
+	spin_unlock(&adapter->stats64_lock);
+}
+
+static void igb_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	u8 *p = data;
+	int i;
+
+	switch (stringset) {
+	case ETH_SS_TEST:
+		memcpy(data, *igb_gstrings_test,
+			IGB_TEST_LEN*ETH_GSTRING_LEN);
+		break;
+	case ETH_SS_STATS:
+		for (i = 0; i < IGB_GLOBAL_STATS_LEN; i++) {
+			memcpy(p, igb_gstrings_stats[i].stat_string,
+			       ETH_GSTRING_LEN);
+			p += ETH_GSTRING_LEN;
+		}
+		for (i = 0; i < IGB_NETDEV_STATS_LEN; i++) {
+			memcpy(p, igb_gstrings_net_stats[i].stat_string,
+			       ETH_GSTRING_LEN);
+			p += ETH_GSTRING_LEN;
+		}
+		for (i = 0; i < adapter->num_tx_queues; i++) {
+			sprintf(p, "tx_queue_%u_packets", i);
+			p += ETH_GSTRING_LEN;
+			sprintf(p, "tx_queue_%u_bytes", i);
+			p += ETH_GSTRING_LEN;
+			sprintf(p, "tx_queue_%u_restart", i);
+			p += ETH_GSTRING_LEN;
+		}
+		for (i = 0; i < adapter->num_rx_queues; i++) {
+			sprintf(p, "rx_queue_%u_packets", i);
+			p += ETH_GSTRING_LEN;
+			sprintf(p, "rx_queue_%u_bytes", i);
+			p += ETH_GSTRING_LEN;
+			sprintf(p, "rx_queue_%u_drops", i);
+			p += ETH_GSTRING_LEN;
+			sprintf(p, "rx_queue_%u_csum_err", i);
+			p += ETH_GSTRING_LEN;
+			sprintf(p, "rx_queue_%u_alloc_failed", i);
+			p += ETH_GSTRING_LEN;
+		}
+/*		BUG_ON(p - data != IGB_STATS_LEN * ETH_GSTRING_LEN); */
+		break;
+	}
+}
+
+static const struct ethtool_ops igb_ethtool_ops = {
+	.get_settings           = igb_get_settings,
+	.set_settings           = igb_set_settings,
+	.get_drvinfo            = igb_get_drvinfo,
+	.get_regs_len           = igb_get_regs_len,
+	.get_regs               = igb_get_regs,
+	.get_wol                = igb_get_wol,
+	.set_wol                = igb_set_wol,
+	.get_msglevel           = igb_get_msglevel,
+	.set_msglevel           = igb_set_msglevel,
+	.nway_reset             = igb_nway_reset,
+	.get_link               = igb_get_link,
+	.get_eeprom_len         = igb_get_eeprom_len,
+	.get_eeprom             = igb_get_eeprom,
+	.set_eeprom             = igb_set_eeprom,
+	.get_ringparam          = igb_get_ringparam,
+	.set_ringparam          = igb_set_ringparam,
+	.get_pauseparam         = igb_get_pauseparam,
+	.set_pauseparam         = igb_set_pauseparam,
+	.self_test              = igb_diag_test,
+	.get_strings            = igb_get_strings,
+	.set_phys_id            = igb_set_phys_id,
+	.get_sset_count         = igb_get_sset_count,
+	.get_ethtool_stats      = igb_get_ethtool_stats,
+	.get_coalesce           = igb_get_coalesce,
+	.set_coalesce           = igb_set_coalesce,
+};
+
+void igb_set_ethtool_ops(struct net_device *netdev)
+{
+	SET_ETHTOOL_OPS(netdev, &igb_ethtool_ops);
+}
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
new file mode 100644
index 00000000000..ced544499f1
--- /dev/null
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -0,0 +1,7119 @@
+/*******************************************************************************
+
+  Intel(R) Gigabit Ethernet Linux driver
+  Copyright(c) 2007-2011 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/vmalloc.h>
+#include <linux/pagemap.h>
+#include <linux/netdevice.h>
+#include <linux/ipv6.h>
+#include <linux/slab.h>
+#include <net/checksum.h>
+#include <net/ip6_checksum.h>
+#include <linux/net_tstamp.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/if.h>
+#include <linux/if_vlan.h>
+#include <linux/pci.h>
+#include <linux/pci-aspm.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/sctp.h>
+#include <linux/if_ether.h>
+#include <linux/aer.h>
+#include <linux/prefetch.h>
+#ifdef CONFIG_IGB_DCA
+#include <linux/dca.h>
+#endif
+#include "igb.h"
+
+#define MAJ 3
+#define MIN 2
+#define BUILD 10
+#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \
+__stringify(BUILD) "-k"
+char igb_driver_name[] = "igb";
+char igb_driver_version[] = DRV_VERSION;
+static const char igb_driver_string[] =
+				"Intel(R) Gigabit Ethernet Network Driver";
+static const char igb_copyright[] = "Copyright (c) 2007-2011 Intel Corporation.";
+
+static const struct e1000_info *igb_info_tbl[] = {
+	[board_82575] = &e1000_82575_info,
+};
+
+static DEFINE_PCI_DEVICE_TABLE(igb_pci_tbl) = {
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_COPPER), board_82575 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_FIBER), board_82575 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_SERDES), board_82575 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_SGMII), board_82575 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_COPPER), board_82575 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_FIBER), board_82575 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_QUAD_FIBER), board_82575 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_SERDES), board_82575 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_SGMII), board_82575 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_COPPER_DUAL), board_82575 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SGMII), board_82575 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SERDES), board_82575 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_BACKPLANE), board_82575 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SFP), board_82575 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576), board_82575 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS), board_82575 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS_SERDES), board_82575 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_FIBER), board_82575 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES), board_82575 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES_QUAD), board_82575 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_QUAD_COPPER_ET2), board_82575 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_QUAD_COPPER), board_82575 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_COPPER), board_82575 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_FIBER_SERDES), board_82575 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82575GB_QUAD_COPPER), board_82575 },
+	/* required last entry */
+	{0, }
+};
+
+MODULE_DEVICE_TABLE(pci, igb_pci_tbl);
+
+void igb_reset(struct igb_adapter *);
+static int igb_setup_all_tx_resources(struct igb_adapter *);
+static int igb_setup_all_rx_resources(struct igb_adapter *);
+static void igb_free_all_tx_resources(struct igb_adapter *);
+static void igb_free_all_rx_resources(struct igb_adapter *);
+static void igb_setup_mrqc(struct igb_adapter *);
+static int igb_probe(struct pci_dev *, const struct pci_device_id *);
+static void __devexit igb_remove(struct pci_dev *pdev);
+static void igb_init_hw_timer(struct igb_adapter *adapter);
+static int igb_sw_init(struct igb_adapter *);
+static int igb_open(struct net_device *);
+static int igb_close(struct net_device *);
+static void igb_configure_tx(struct igb_adapter *);
+static void igb_configure_rx(struct igb_adapter *);
+static void igb_clean_all_tx_rings(struct igb_adapter *);
+static void igb_clean_all_rx_rings(struct igb_adapter *);
+static void igb_clean_tx_ring(struct igb_ring *);
+static void igb_clean_rx_ring(struct igb_ring *);
+static void igb_set_rx_mode(struct net_device *);
+static void igb_update_phy_info(unsigned long);
+static void igb_watchdog(unsigned long);
+static void igb_watchdog_task(struct work_struct *);
+static netdev_tx_t igb_xmit_frame(struct sk_buff *skb, struct net_device *);
+static struct rtnl_link_stats64 *igb_get_stats64(struct net_device *dev,
+						 struct rtnl_link_stats64 *stats);
+static int igb_change_mtu(struct net_device *, int);
+static int igb_set_mac(struct net_device *, void *);
+static void igb_set_uta(struct igb_adapter *adapter);
+static irqreturn_t igb_intr(int irq, void *);
+static irqreturn_t igb_intr_msi(int irq, void *);
+static irqreturn_t igb_msix_other(int irq, void *);
+static irqreturn_t igb_msix_ring(int irq, void *);
+#ifdef CONFIG_IGB_DCA
+static void igb_update_dca(struct igb_q_vector *);
+static void igb_setup_dca(struct igb_adapter *);
+#endif /* CONFIG_IGB_DCA */
+static int igb_poll(struct napi_struct *, int);
+static bool igb_clean_tx_irq(struct igb_q_vector *);
+static bool igb_clean_rx_irq(struct igb_q_vector *, int);
+static int igb_ioctl(struct net_device *, struct ifreq *, int cmd);
+static void igb_tx_timeout(struct net_device *);
+static void igb_reset_task(struct work_struct *);
+static void igb_vlan_mode(struct net_device *netdev, u32 features);
+static void igb_vlan_rx_add_vid(struct net_device *, u16);
+static void igb_vlan_rx_kill_vid(struct net_device *, u16);
+static void igb_restore_vlan(struct igb_adapter *);
+static void igb_rar_set_qsel(struct igb_adapter *, u8 *, u32 , u8);
+static void igb_ping_all_vfs(struct igb_adapter *);
+static void igb_msg_task(struct igb_adapter *);
+static void igb_vmm_control(struct igb_adapter *);
+static int igb_set_vf_mac(struct igb_adapter *, int, unsigned char *);
+static void igb_restore_vf_multicasts(struct igb_adapter *adapter);
+static int igb_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac);
+static int igb_ndo_set_vf_vlan(struct net_device *netdev,
+			       int vf, u16 vlan, u8 qos);
+static int igb_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate);
+static int igb_ndo_get_vf_config(struct net_device *netdev, int vf,
+				 struct ifla_vf_info *ivi);
+static void igb_check_vf_rate_limit(struct igb_adapter *);
+
+#ifdef CONFIG_PCI_IOV
+static int igb_vf_configure(struct igb_adapter *adapter, int vf);
+static int igb_find_enabled_vfs(struct igb_adapter *adapter);
+static int igb_check_vf_assignment(struct igb_adapter *adapter);
+#endif
+
+#ifdef CONFIG_PM
+static int igb_suspend(struct pci_dev *, pm_message_t);
+static int igb_resume(struct pci_dev *);
+#endif
+static void igb_shutdown(struct pci_dev *);
+#ifdef CONFIG_IGB_DCA
+static int igb_notify_dca(struct notifier_block *, unsigned long, void *);
+static struct notifier_block dca_notifier = {
+	.notifier_call	= igb_notify_dca,
+	.next		= NULL,
+	.priority	= 0
+};
+#endif
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/* for netdump / net console */
+static void igb_netpoll(struct net_device *);
+#endif
+#ifdef CONFIG_PCI_IOV
+static unsigned int max_vfs = 0;
+module_param(max_vfs, uint, 0);
+MODULE_PARM_DESC(max_vfs, "Maximum number of virtual functions to allocate "
+                 "per physical function");
+#endif /* CONFIG_PCI_IOV */
+
+static pci_ers_result_t igb_io_error_detected(struct pci_dev *,
+		     pci_channel_state_t);
+static pci_ers_result_t igb_io_slot_reset(struct pci_dev *);
+static void igb_io_resume(struct pci_dev *);
+
+static struct pci_error_handlers igb_err_handler = {
+	.error_detected = igb_io_error_detected,
+	.slot_reset = igb_io_slot_reset,
+	.resume = igb_io_resume,
+};
+
+static void igb_init_dmac(struct igb_adapter *adapter, u32 pba);
+
+static struct pci_driver igb_driver = {
+	.name     = igb_driver_name,
+	.id_table = igb_pci_tbl,
+	.probe    = igb_probe,
+	.remove   = __devexit_p(igb_remove),
+#ifdef CONFIG_PM
+	/* Power Management Hooks */
+	.suspend  = igb_suspend,
+	.resume   = igb_resume,
+#endif
+	.shutdown = igb_shutdown,
+	.err_handler = &igb_err_handler
+};
+
+MODULE_AUTHOR("Intel Corporation, <e1000-devel@lists.sourceforge.net>");
+MODULE_DESCRIPTION("Intel(R) Gigabit Ethernet Network Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+struct igb_reg_info {
+	u32 ofs;
+	char *name;
+};
+
+static const struct igb_reg_info igb_reg_info_tbl[] = {
+
+	/* General Registers */
+	{E1000_CTRL, "CTRL"},
+	{E1000_STATUS, "STATUS"},
+	{E1000_CTRL_EXT, "CTRL_EXT"},
+
+	/* Interrupt Registers */
+	{E1000_ICR, "ICR"},
+
+	/* RX Registers */
+	{E1000_RCTL, "RCTL"},
+	{E1000_RDLEN(0), "RDLEN"},
+	{E1000_RDH(0), "RDH"},
+	{E1000_RDT(0), "RDT"},
+	{E1000_RXDCTL(0), "RXDCTL"},
+	{E1000_RDBAL(0), "RDBAL"},
+	{E1000_RDBAH(0), "RDBAH"},
+
+	/* TX Registers */
+	{E1000_TCTL, "TCTL"},
+	{E1000_TDBAL(0), "TDBAL"},
+	{E1000_TDBAH(0), "TDBAH"},
+	{E1000_TDLEN(0), "TDLEN"},
+	{E1000_TDH(0), "TDH"},
+	{E1000_TDT(0), "TDT"},
+	{E1000_TXDCTL(0), "TXDCTL"},
+	{E1000_TDFH, "TDFH"},
+	{E1000_TDFT, "TDFT"},
+	{E1000_TDFHS, "TDFHS"},
+	{E1000_TDFPC, "TDFPC"},
+
+	/* List Terminator */
+	{}
+};
+
+/*
+ * igb_regdump - register printout routine
+ */
+static void igb_regdump(struct e1000_hw *hw, struct igb_reg_info *reginfo)
+{
+	int n = 0;
+	char rname[16];
+	u32 regs[8];
+
+	switch (reginfo->ofs) {
+	case E1000_RDLEN(0):
+		for (n = 0; n < 4; n++)
+			regs[n] = rd32(E1000_RDLEN(n));
+		break;
+	case E1000_RDH(0):
+		for (n = 0; n < 4; n++)
+			regs[n] = rd32(E1000_RDH(n));
+		break;
+	case E1000_RDT(0):
+		for (n = 0; n < 4; n++)
+			regs[n] = rd32(E1000_RDT(n));
+		break;
+	case E1000_RXDCTL(0):
+		for (n = 0; n < 4; n++)
+			regs[n] = rd32(E1000_RXDCTL(n));
+		break;
+	case E1000_RDBAL(0):
+		for (n = 0; n < 4; n++)
+			regs[n] = rd32(E1000_RDBAL(n));
+		break;
+	case E1000_RDBAH(0):
+		for (n = 0; n < 4; n++)
+			regs[n] = rd32(E1000_RDBAH(n));
+		break;
+	case E1000_TDBAL(0):
+		for (n = 0; n < 4; n++)
+			regs[n] = rd32(E1000_RDBAL(n));
+		break;
+	case E1000_TDBAH(0):
+		for (n = 0; n < 4; n++)
+			regs[n] = rd32(E1000_TDBAH(n));
+		break;
+	case E1000_TDLEN(0):
+		for (n = 0; n < 4; n++)
+			regs[n] = rd32(E1000_TDLEN(n));
+		break;
+	case E1000_TDH(0):
+		for (n = 0; n < 4; n++)
+			regs[n] = rd32(E1000_TDH(n));
+		break;
+	case E1000_TDT(0):
+		for (n = 0; n < 4; n++)
+			regs[n] = rd32(E1000_TDT(n));
+		break;
+	case E1000_TXDCTL(0):
+		for (n = 0; n < 4; n++)
+			regs[n] = rd32(E1000_TXDCTL(n));
+		break;
+	default:
+		printk(KERN_INFO "%-15s %08x\n",
+			reginfo->name, rd32(reginfo->ofs));
+		return;
+	}
+
+	snprintf(rname, 16, "%s%s", reginfo->name, "[0-3]");
+	printk(KERN_INFO "%-15s ", rname);
+	for (n = 0; n < 4; n++)
+		printk(KERN_CONT "%08x ", regs[n]);
+	printk(KERN_CONT "\n");
+}
+
+/*
+ * igb_dump - Print registers, tx-rings and rx-rings
+ */
+static void igb_dump(struct igb_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	struct e1000_hw *hw = &adapter->hw;
+	struct igb_reg_info *reginfo;
+	struct igb_ring *tx_ring;
+	union e1000_adv_tx_desc *tx_desc;
+	struct my_u0 { u64 a; u64 b; } *u0;
+	struct igb_ring *rx_ring;
+	union e1000_adv_rx_desc *rx_desc;
+	u32 staterr;
+	u16 i, n;
+
+	if (!netif_msg_hw(adapter))
+		return;
+
+	/* Print netdevice Info */
+	if (netdev) {
+		dev_info(&adapter->pdev->dev, "Net device Info\n");
+		printk(KERN_INFO "Device Name     state            "
+			"trans_start      last_rx\n");
+		printk(KERN_INFO "%-15s %016lX %016lX %016lX\n",
+		netdev->name,
+		netdev->state,
+		netdev->trans_start,
+		netdev->last_rx);
+	}
+
+	/* Print Registers */
+	dev_info(&adapter->pdev->dev, "Register Dump\n");
+	printk(KERN_INFO " Register Name   Value\n");
+	for (reginfo = (struct igb_reg_info *)igb_reg_info_tbl;
+	     reginfo->name; reginfo++) {
+		igb_regdump(hw, reginfo);
+	}
+
+	/* Print TX Ring Summary */
+	if (!netdev || !netif_running(netdev))
+		goto exit;
+
+	dev_info(&adapter->pdev->dev, "TX Rings Summary\n");
+	printk(KERN_INFO "Queue [NTU] [NTC] [bi(ntc)->dma  ]"
+		" leng ntw timestamp\n");
+	for (n = 0; n < adapter->num_tx_queues; n++) {
+		struct igb_tx_buffer *buffer_info;
+		tx_ring = adapter->tx_ring[n];
+		buffer_info = &tx_ring->tx_buffer_info[tx_ring->next_to_clean];
+		printk(KERN_INFO " %5d %5X %5X %016llX %04X %p %016llX\n",
+			   n, tx_ring->next_to_use, tx_ring->next_to_clean,
+			   (u64)buffer_info->dma,
+			   buffer_info->length,
+			   buffer_info->next_to_watch,
+			   (u64)buffer_info->time_stamp);
+	}
+
+	/* Print TX Rings */
+	if (!netif_msg_tx_done(adapter))
+		goto rx_ring_summary;
+
+	dev_info(&adapter->pdev->dev, "TX Rings Dump\n");
+
+	/* Transmit Descriptor Formats
+	 *
+	 * Advanced Transmit Descriptor
+	 *   +--------------------------------------------------------------+
+	 * 0 |         Buffer Address [63:0]                                |
+	 *   +--------------------------------------------------------------+
+	 * 8 | PAYLEN  | PORTS  |CC|IDX | STA | DCMD  |DTYP|MAC|RSV| DTALEN |
+	 *   +--------------------------------------------------------------+
+	 *   63      46 45    40 39 38 36 35 32 31   24             15       0
+	 */
+
+	for (n = 0; n < adapter->num_tx_queues; n++) {
+		tx_ring = adapter->tx_ring[n];
+		printk(KERN_INFO "------------------------------------\n");
+		printk(KERN_INFO "TX QUEUE INDEX = %d\n", tx_ring->queue_index);
+		printk(KERN_INFO "------------------------------------\n");
+		printk(KERN_INFO "T [desc]     [address 63:0  ] "
+			"[PlPOCIStDDM Ln] [bi->dma       ] "
+			"leng  ntw timestamp        bi->skb\n");
+
+		for (i = 0; tx_ring->desc && (i < tx_ring->count); i++) {
+			struct igb_tx_buffer *buffer_info;
+			tx_desc = IGB_TX_DESC(tx_ring, i);
+			buffer_info = &tx_ring->tx_buffer_info[i];
+			u0 = (struct my_u0 *)tx_desc;
+			printk(KERN_INFO "T [0x%03X]    %016llX %016llX %016llX"
+				" %04X  %p %016llX %p", i,
+				le64_to_cpu(u0->a),
+				le64_to_cpu(u0->b),
+				(u64)buffer_info->dma,
+				buffer_info->length,
+				buffer_info->next_to_watch,
+				(u64)buffer_info->time_stamp,
+				buffer_info->skb);
+			if (i == tx_ring->next_to_use &&
+				i == tx_ring->next_to_clean)
+				printk(KERN_CONT " NTC/U\n");
+			else if (i == tx_ring->next_to_use)
+				printk(KERN_CONT " NTU\n");
+			else if (i == tx_ring->next_to_clean)
+				printk(KERN_CONT " NTC\n");
+			else
+				printk(KERN_CONT "\n");
+
+			if (netif_msg_pktdata(adapter) && buffer_info->dma != 0)
+				print_hex_dump(KERN_INFO, "",
+					DUMP_PREFIX_ADDRESS,
+					16, 1, phys_to_virt(buffer_info->dma),
+					buffer_info->length, true);
+		}
+	}
+
+	/* Print RX Rings Summary */
+rx_ring_summary:
+	dev_info(&adapter->pdev->dev, "RX Rings Summary\n");
+	printk(KERN_INFO "Queue [NTU] [NTC]\n");
+	for (n = 0; n < adapter->num_rx_queues; n++) {
+		rx_ring = adapter->rx_ring[n];
+		printk(KERN_INFO " %5d %5X %5X\n", n,
+			   rx_ring->next_to_use, rx_ring->next_to_clean);
+	}
+
+	/* Print RX Rings */
+	if (!netif_msg_rx_status(adapter))
+		goto exit;
+
+	dev_info(&adapter->pdev->dev, "RX Rings Dump\n");
+
+	/* Advanced Receive Descriptor (Read) Format
+	 *    63                                           1        0
+	 *    +-----------------------------------------------------+
+	 *  0 |       Packet Buffer Address [63:1]           |A0/NSE|
+	 *    +----------------------------------------------+------+
+	 *  8 |       Header Buffer Address [63:1]           |  DD  |
+	 *    +-----------------------------------------------------+
+	 *
+	 *
+	 * Advanced Receive Descriptor (Write-Back) Format
+	 *
+	 *   63       48 47    32 31  30      21 20 17 16   4 3     0
+	 *   +------------------------------------------------------+
+	 * 0 | Packet     IP     |SPH| HDR_LEN   | RSV|Packet|  RSS |
+	 *   | Checksum   Ident  |   |           |    | Type | Type |
+	 *   +------------------------------------------------------+
+	 * 8 | VLAN Tag | Length | Extended Error | Extended Status |
+	 *   +------------------------------------------------------+
+	 *   63       48 47    32 31            20 19               0
+	 */
+
+	for (n = 0; n < adapter->num_rx_queues; n++) {
+		rx_ring = adapter->rx_ring[n];
+		printk(KERN_INFO "------------------------------------\n");
+		printk(KERN_INFO "RX QUEUE INDEX = %d\n", rx_ring->queue_index);
+		printk(KERN_INFO "------------------------------------\n");
+		printk(KERN_INFO "R  [desc]      [ PktBuf     A0] "
+			"[  HeadBuf   DD] [bi->dma       ] [bi->skb] "
+			"<-- Adv Rx Read format\n");
+		printk(KERN_INFO "RWB[desc]      [PcsmIpSHl PtRs] "
+			"[vl er S cks ln] ---------------- [bi->skb] "
+			"<-- Adv Rx Write-Back format\n");
+
+		for (i = 0; i < rx_ring->count; i++) {
+			struct igb_rx_buffer *buffer_info;
+			buffer_info = &rx_ring->rx_buffer_info[i];
+			rx_desc = IGB_RX_DESC(rx_ring, i);
+			u0 = (struct my_u0 *)rx_desc;
+			staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+			if (staterr & E1000_RXD_STAT_DD) {
+				/* Descriptor Done */
+				printk(KERN_INFO "RWB[0x%03X]     %016llX "
+					"%016llX ---------------- %p", i,
+					le64_to_cpu(u0->a),
+					le64_to_cpu(u0->b),
+					buffer_info->skb);
+			} else {
+				printk(KERN_INFO "R  [0x%03X]     %016llX "
+					"%016llX %016llX %p", i,
+					le64_to_cpu(u0->a),
+					le64_to_cpu(u0->b),
+					(u64)buffer_info->dma,
+					buffer_info->skb);
+
+				if (netif_msg_pktdata(adapter)) {
+					print_hex_dump(KERN_INFO, "",
+						DUMP_PREFIX_ADDRESS,
+						16, 1,
+						phys_to_virt(buffer_info->dma),
+						IGB_RX_HDR_LEN, true);
+					print_hex_dump(KERN_INFO, "",
+					  DUMP_PREFIX_ADDRESS,
+					  16, 1,
+					  phys_to_virt(
+					    buffer_info->page_dma +
+					    buffer_info->page_offset),
+					  PAGE_SIZE/2, true);
+				}
+			}
+
+			if (i == rx_ring->next_to_use)
+				printk(KERN_CONT " NTU\n");
+			else if (i == rx_ring->next_to_clean)
+				printk(KERN_CONT " NTC\n");
+			else
+				printk(KERN_CONT "\n");
+
+		}
+	}
+
+exit:
+	return;
+}
+
+
+/**
+ * igb_read_clock - read raw cycle counter (to be used by time counter)
+ */
+static cycle_t igb_read_clock(const struct cyclecounter *tc)
+{
+	struct igb_adapter *adapter =
+		container_of(tc, struct igb_adapter, cycles);
+	struct e1000_hw *hw = &adapter->hw;
+	u64 stamp = 0;
+	int shift = 0;
+
+	/*
+	 * The timestamp latches on lowest register read. For the 82580
+	 * the lowest register is SYSTIMR instead of SYSTIML.  However we never
+	 * adjusted TIMINCA so SYSTIMR will just read as all 0s so ignore it.
+	 */
+	if (hw->mac.type >= e1000_82580) {
+		stamp = rd32(E1000_SYSTIMR) >> 8;
+		shift = IGB_82580_TSYNC_SHIFT;
+	}
+
+	stamp |= (u64)rd32(E1000_SYSTIML) << shift;
+	stamp |= (u64)rd32(E1000_SYSTIMH) << (shift + 32);
+	return stamp;
+}
+
+/**
+ * igb_get_hw_dev - return device
+ * used by hardware layer to print debugging information
+ **/
+struct net_device *igb_get_hw_dev(struct e1000_hw *hw)
+{
+	struct igb_adapter *adapter = hw->back;
+	return adapter->netdev;
+}
+
+/**
+ * igb_init_module - Driver Registration Routine
+ *
+ * igb_init_module is the first routine called when the driver is
+ * loaded. All it does is register with the PCI subsystem.
+ **/
+static int __init igb_init_module(void)
+{
+	int ret;
+	printk(KERN_INFO "%s - version %s\n",
+	       igb_driver_string, igb_driver_version);
+
+	printk(KERN_INFO "%s\n", igb_copyright);
+
+#ifdef CONFIG_IGB_DCA
+	dca_register_notify(&dca_notifier);
+#endif
+	ret = pci_register_driver(&igb_driver);
+	return ret;
+}
+
+module_init(igb_init_module);
+
+/**
+ * igb_exit_module - Driver Exit Cleanup Routine
+ *
+ * igb_exit_module is called just before the driver is removed
+ * from memory.
+ **/
+static void __exit igb_exit_module(void)
+{
+#ifdef CONFIG_IGB_DCA
+	dca_unregister_notify(&dca_notifier);
+#endif
+	pci_unregister_driver(&igb_driver);
+}
+
+module_exit(igb_exit_module);
+
+#define Q_IDX_82576(i) (((i & 0x1) << 3) + (i >> 1))
+/**
+ * igb_cache_ring_register - Descriptor ring to register mapping
+ * @adapter: board private structure to initialize
+ *
+ * Once we know the feature-set enabled for the device, we'll cache
+ * the register offset the descriptor ring is assigned to.
+ **/
+static void igb_cache_ring_register(struct igb_adapter *adapter)
+{
+	int i = 0, j = 0;
+	u32 rbase_offset = adapter->vfs_allocated_count;
+
+	switch (adapter->hw.mac.type) {
+	case e1000_82576:
+		/* The queues are allocated for virtualization such that VF 0
+		 * is allocated queues 0 and 8, VF 1 queues 1 and 9, etc.
+		 * In order to avoid collision we start at the first free queue
+		 * and continue consuming queues in the same sequence
+		 */
+		if (adapter->vfs_allocated_count) {
+			for (; i < adapter->rss_queues; i++)
+				adapter->rx_ring[i]->reg_idx = rbase_offset +
+				                               Q_IDX_82576(i);
+		}
+	case e1000_82575:
+	case e1000_82580:
+	case e1000_i350:
+	default:
+		for (; i < adapter->num_rx_queues; i++)
+			adapter->rx_ring[i]->reg_idx = rbase_offset + i;
+		for (; j < adapter->num_tx_queues; j++)
+			adapter->tx_ring[j]->reg_idx = rbase_offset + j;
+		break;
+	}
+}
+
+static void igb_free_queues(struct igb_adapter *adapter)
+{
+	int i;
+
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		kfree(adapter->tx_ring[i]);
+		adapter->tx_ring[i] = NULL;
+	}
+	for (i = 0; i < adapter->num_rx_queues; i++) {
+		kfree(adapter->rx_ring[i]);
+		adapter->rx_ring[i] = NULL;
+	}
+	adapter->num_rx_queues = 0;
+	adapter->num_tx_queues = 0;
+}
+
+/**
+ * igb_alloc_queues - Allocate memory for all rings
+ * @adapter: board private structure to initialize
+ *
+ * We allocate one ring per queue at run-time since we don't know the
+ * number of queues at compile-time.
+ **/
+static int igb_alloc_queues(struct igb_adapter *adapter)
+{
+	struct igb_ring *ring;
+	int i;
+	int orig_node = adapter->node;
+
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		if (orig_node == -1) {
+			int cur_node = next_online_node(adapter->node);
+			if (cur_node == MAX_NUMNODES)
+				cur_node = first_online_node;
+			adapter->node = cur_node;
+		}
+		ring = kzalloc_node(sizeof(struct igb_ring), GFP_KERNEL,
+				    adapter->node);
+		if (!ring)
+			ring = kzalloc(sizeof(struct igb_ring), GFP_KERNEL);
+		if (!ring)
+			goto err;
+		ring->count = adapter->tx_ring_count;
+		ring->queue_index = i;
+		ring->dev = &adapter->pdev->dev;
+		ring->netdev = adapter->netdev;
+		ring->numa_node = adapter->node;
+		/* For 82575, context index must be unique per ring. */
+		if (adapter->hw.mac.type == e1000_82575)
+			set_bit(IGB_RING_FLAG_TX_CTX_IDX, &ring->flags);
+		adapter->tx_ring[i] = ring;
+	}
+	/* Restore the adapter's original node */
+	adapter->node = orig_node;
+
+	for (i = 0; i < adapter->num_rx_queues; i++) {
+		if (orig_node == -1) {
+			int cur_node = next_online_node(adapter->node);
+			if (cur_node == MAX_NUMNODES)
+				cur_node = first_online_node;
+			adapter->node = cur_node;
+		}
+		ring = kzalloc_node(sizeof(struct igb_ring), GFP_KERNEL,
+				    adapter->node);
+		if (!ring)
+			ring = kzalloc(sizeof(struct igb_ring), GFP_KERNEL);
+		if (!ring)
+			goto err;
+		ring->count = adapter->rx_ring_count;
+		ring->queue_index = i;
+		ring->dev = &adapter->pdev->dev;
+		ring->netdev = adapter->netdev;
+		ring->numa_node = adapter->node;
+		/* set flag indicating ring supports SCTP checksum offload */
+		if (adapter->hw.mac.type >= e1000_82576)
+			set_bit(IGB_RING_FLAG_RX_SCTP_CSUM, &ring->flags);
+
+		/* On i350, loopback VLAN packets have the tag byte-swapped. */
+		if (adapter->hw.mac.type == e1000_i350)
+			set_bit(IGB_RING_FLAG_RX_LB_VLAN_BSWAP, &ring->flags);
+
+		adapter->rx_ring[i] = ring;
+	}
+	/* Restore the adapter's original node */
+	adapter->node = orig_node;
+
+	igb_cache_ring_register(adapter);
+
+	return 0;
+
+err:
+	/* Restore the adapter's original node */
+	adapter->node = orig_node;
+	igb_free_queues(adapter);
+
+	return -ENOMEM;
+}
+
+/**
+ *  igb_write_ivar - configure ivar for given MSI-X vector
+ *  @hw: pointer to the HW structure
+ *  @msix_vector: vector number we are allocating to a given ring
+ *  @index: row index of IVAR register to write within IVAR table
+ *  @offset: column offset of in IVAR, should be multiple of 8
+ *
+ *  This function is intended to handle the writing of the IVAR register
+ *  for adapters 82576 and newer.  The IVAR table consists of 2 columns,
+ *  each containing an cause allocation for an Rx and Tx ring, and a
+ *  variable number of rows depending on the number of queues supported.
+ **/
+static void igb_write_ivar(struct e1000_hw *hw, int msix_vector,
+			   int index, int offset)
+{
+	u32 ivar = array_rd32(E1000_IVAR0, index);
+
+	/* clear any bits that are currently set */
+	ivar &= ~((u32)0xFF << offset);
+
+	/* write vector and valid bit */
+	ivar |= (msix_vector | E1000_IVAR_VALID) << offset;
+
+	array_wr32(E1000_IVAR0, index, ivar);
+}
+
+#define IGB_N0_QUEUE -1
+static void igb_assign_vector(struct igb_q_vector *q_vector, int msix_vector)
+{
+	struct igb_adapter *adapter = q_vector->adapter;
+	struct e1000_hw *hw = &adapter->hw;
+	int rx_queue = IGB_N0_QUEUE;
+	int tx_queue = IGB_N0_QUEUE;
+	u32 msixbm = 0;
+
+	if (q_vector->rx.ring)
+		rx_queue = q_vector->rx.ring->reg_idx;
+	if (q_vector->tx.ring)
+		tx_queue = q_vector->tx.ring->reg_idx;
+
+	switch (hw->mac.type) {
+	case e1000_82575:
+		/* The 82575 assigns vectors using a bitmask, which matches the
+		   bitmask for the EICR/EIMS/EIMC registers.  To assign one
+		   or more queues to a vector, we write the appropriate bits
+		   into the MSIXBM register for that vector. */
+		if (rx_queue > IGB_N0_QUEUE)
+			msixbm = E1000_EICR_RX_QUEUE0 << rx_queue;
+		if (tx_queue > IGB_N0_QUEUE)
+			msixbm |= E1000_EICR_TX_QUEUE0 << tx_queue;
+		if (!adapter->msix_entries && msix_vector == 0)
+			msixbm |= E1000_EIMS_OTHER;
+		array_wr32(E1000_MSIXBM(0), msix_vector, msixbm);
+		q_vector->eims_value = msixbm;
+		break;
+	case e1000_82576:
+		/*
+		 * 82576 uses a table that essentially consists of 2 columns
+		 * with 8 rows.  The ordering is column-major so we use the
+		 * lower 3 bits as the row index, and the 4th bit as the
+		 * column offset.
+		 */
+		if (rx_queue > IGB_N0_QUEUE)
+			igb_write_ivar(hw, msix_vector,
+				       rx_queue & 0x7,
+				       (rx_queue & 0x8) << 1);
+		if (tx_queue > IGB_N0_QUEUE)
+			igb_write_ivar(hw, msix_vector,
+				       tx_queue & 0x7,
+				       ((tx_queue & 0x8) << 1) + 8);
+		q_vector->eims_value = 1 << msix_vector;
+		break;
+	case e1000_82580:
+	case e1000_i350:
+		/*
+		 * On 82580 and newer adapters the scheme is similar to 82576
+		 * however instead of ordering column-major we have things
+		 * ordered row-major.  So we traverse the table by using
+		 * bit 0 as the column offset, and the remaining bits as the
+		 * row index.
+		 */
+		if (rx_queue > IGB_N0_QUEUE)
+			igb_write_ivar(hw, msix_vector,
+				       rx_queue >> 1,
+				       (rx_queue & 0x1) << 4);
+		if (tx_queue > IGB_N0_QUEUE)
+			igb_write_ivar(hw, msix_vector,
+				       tx_queue >> 1,
+				       ((tx_queue & 0x1) << 4) + 8);
+		q_vector->eims_value = 1 << msix_vector;
+		break;
+	default:
+		BUG();
+		break;
+	}
+
+	/* add q_vector eims value to global eims_enable_mask */
+	adapter->eims_enable_mask |= q_vector->eims_value;
+
+	/* configure q_vector to set itr on first interrupt */
+	q_vector->set_itr = 1;
+}
+
+/**
+ * igb_configure_msix - Configure MSI-X hardware
+ *
+ * igb_configure_msix sets up the hardware to properly
+ * generate MSI-X interrupts.
+ **/
+static void igb_configure_msix(struct igb_adapter *adapter)
+{
+	u32 tmp;
+	int i, vector = 0;
+	struct e1000_hw *hw = &adapter->hw;
+
+	adapter->eims_enable_mask = 0;
+
+	/* set vector for other causes, i.e. link changes */
+	switch (hw->mac.type) {
+	case e1000_82575:
+		tmp = rd32(E1000_CTRL_EXT);
+		/* enable MSI-X PBA support*/
+		tmp |= E1000_CTRL_EXT_PBA_CLR;
+
+		/* Auto-Mask interrupts upon ICR read. */
+		tmp |= E1000_CTRL_EXT_EIAME;
+		tmp |= E1000_CTRL_EXT_IRCA;
+
+		wr32(E1000_CTRL_EXT, tmp);
+
+		/* enable msix_other interrupt */
+		array_wr32(E1000_MSIXBM(0), vector++,
+		                      E1000_EIMS_OTHER);
+		adapter->eims_other = E1000_EIMS_OTHER;
+
+		break;
+
+	case e1000_82576:
+	case e1000_82580:
+	case e1000_i350:
+		/* Turn on MSI-X capability first, or our settings
+		 * won't stick.  And it will take days to debug. */
+		wr32(E1000_GPIE, E1000_GPIE_MSIX_MODE |
+		                E1000_GPIE_PBA | E1000_GPIE_EIAME |
+		                E1000_GPIE_NSICR);
+
+		/* enable msix_other interrupt */
+		adapter->eims_other = 1 << vector;
+		tmp = (vector++ | E1000_IVAR_VALID) << 8;
+
+		wr32(E1000_IVAR_MISC, tmp);
+		break;
+	default:
+		/* do nothing, since nothing else supports MSI-X */
+		break;
+	} /* switch (hw->mac.type) */
+
+	adapter->eims_enable_mask |= adapter->eims_other;
+
+	for (i = 0; i < adapter->num_q_vectors; i++)
+		igb_assign_vector(adapter->q_vector[i], vector++);
+
+	wrfl();
+}
+
+/**
+ * igb_request_msix - Initialize MSI-X interrupts
+ *
+ * igb_request_msix allocates MSI-X vectors and requests interrupts from the
+ * kernel.
+ **/
+static int igb_request_msix(struct igb_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	struct e1000_hw *hw = &adapter->hw;
+	int i, err = 0, vector = 0;
+
+	err = request_irq(adapter->msix_entries[vector].vector,
+	                  igb_msix_other, 0, netdev->name, adapter);
+	if (err)
+		goto out;
+	vector++;
+
+	for (i = 0; i < adapter->num_q_vectors; i++) {
+		struct igb_q_vector *q_vector = adapter->q_vector[i];
+
+		q_vector->itr_register = hw->hw_addr + E1000_EITR(vector);
+
+		if (q_vector->rx.ring && q_vector->tx.ring)
+			sprintf(q_vector->name, "%s-TxRx-%u", netdev->name,
+				q_vector->rx.ring->queue_index);
+		else if (q_vector->tx.ring)
+			sprintf(q_vector->name, "%s-tx-%u", netdev->name,
+				q_vector->tx.ring->queue_index);
+		else if (q_vector->rx.ring)
+			sprintf(q_vector->name, "%s-rx-%u", netdev->name,
+				q_vector->rx.ring->queue_index);
+		else
+			sprintf(q_vector->name, "%s-unused", netdev->name);
+
+		err = request_irq(adapter->msix_entries[vector].vector,
+		                  igb_msix_ring, 0, q_vector->name,
+		                  q_vector);
+		if (err)
+			goto out;
+		vector++;
+	}
+
+	igb_configure_msix(adapter);
+	return 0;
+out:
+	return err;
+}
+
+static void igb_reset_interrupt_capability(struct igb_adapter *adapter)
+{
+	if (adapter->msix_entries) {
+		pci_disable_msix(adapter->pdev);
+		kfree(adapter->msix_entries);
+		adapter->msix_entries = NULL;
+	} else if (adapter->flags & IGB_FLAG_HAS_MSI) {
+		pci_disable_msi(adapter->pdev);
+	}
+}
+
+/**
+ * igb_free_q_vectors - Free memory allocated for interrupt vectors
+ * @adapter: board private structure to initialize
+ *
+ * This function frees the memory allocated to the q_vectors.  In addition if
+ * NAPI is enabled it will delete any references to the NAPI struct prior
+ * to freeing the q_vector.
+ **/
+static void igb_free_q_vectors(struct igb_adapter *adapter)
+{
+	int v_idx;
+
+	for (v_idx = 0; v_idx < adapter->num_q_vectors; v_idx++) {
+		struct igb_q_vector *q_vector = adapter->q_vector[v_idx];
+		adapter->q_vector[v_idx] = NULL;
+		if (!q_vector)
+			continue;
+		netif_napi_del(&q_vector->napi);
+		kfree(q_vector);
+	}
+	adapter->num_q_vectors = 0;
+}
+
+/**
+ * igb_clear_interrupt_scheme - reset the device to a state of no interrupts
+ *
+ * This function resets the device so that it has 0 rx queues, tx queues, and
+ * MSI-X interrupts allocated.
+ */
+static void igb_clear_interrupt_scheme(struct igb_adapter *adapter)
+{
+	igb_free_queues(adapter);
+	igb_free_q_vectors(adapter);
+	igb_reset_interrupt_capability(adapter);
+}
+
+/**
+ * igb_set_interrupt_capability - set MSI or MSI-X if supported
+ *
+ * Attempt to configure interrupts using the best available
+ * capabilities of the hardware and kernel.
+ **/
+static int igb_set_interrupt_capability(struct igb_adapter *adapter)
+{
+	int err;
+	int numvecs, i;
+
+	/* Number of supported queues. */
+	adapter->num_rx_queues = adapter->rss_queues;
+	if (adapter->vfs_allocated_count)
+		adapter->num_tx_queues = 1;
+	else
+		adapter->num_tx_queues = adapter->rss_queues;
+
+	/* start with one vector for every rx queue */
+	numvecs = adapter->num_rx_queues;
+
+	/* if tx handler is separate add 1 for every tx queue */
+	if (!(adapter->flags & IGB_FLAG_QUEUE_PAIRS))
+		numvecs += adapter->num_tx_queues;
+
+	/* store the number of vectors reserved for queues */
+	adapter->num_q_vectors = numvecs;
+
+	/* add 1 vector for link status interrupts */
+	numvecs++;
+	adapter->msix_entries = kcalloc(numvecs, sizeof(struct msix_entry),
+					GFP_KERNEL);
+	if (!adapter->msix_entries)
+		goto msi_only;
+
+	for (i = 0; i < numvecs; i++)
+		adapter->msix_entries[i].entry = i;
+
+	err = pci_enable_msix(adapter->pdev,
+			      adapter->msix_entries,
+			      numvecs);
+	if (err == 0)
+		goto out;
+
+	igb_reset_interrupt_capability(adapter);
+
+	/* If we can't do MSI-X, try MSI */
+msi_only:
+#ifdef CONFIG_PCI_IOV
+	/* disable SR-IOV for non MSI-X configurations */
+	if (adapter->vf_data) {
+		struct e1000_hw *hw = &adapter->hw;
+		/* disable iov and allow time for transactions to clear */
+		pci_disable_sriov(adapter->pdev);
+		msleep(500);
+
+		kfree(adapter->vf_data);
+		adapter->vf_data = NULL;
+		wr32(E1000_IOVCTL, E1000_IOVCTL_REUSE_VFQ);
+		wrfl();
+		msleep(100);
+		dev_info(&adapter->pdev->dev, "IOV Disabled\n");
+	}
+#endif
+	adapter->vfs_allocated_count = 0;
+	adapter->rss_queues = 1;
+	adapter->flags |= IGB_FLAG_QUEUE_PAIRS;
+	adapter->num_rx_queues = 1;
+	adapter->num_tx_queues = 1;
+	adapter->num_q_vectors = 1;
+	if (!pci_enable_msi(adapter->pdev))
+		adapter->flags |= IGB_FLAG_HAS_MSI;
+out:
+	/* Notify the stack of the (possibly) reduced queue counts. */
+	netif_set_real_num_tx_queues(adapter->netdev, adapter->num_tx_queues);
+	return netif_set_real_num_rx_queues(adapter->netdev,
+					    adapter->num_rx_queues);
+}
+
+/**
+ * igb_alloc_q_vectors - Allocate memory for interrupt vectors
+ * @adapter: board private structure to initialize
+ *
+ * We allocate one q_vector per queue interrupt.  If allocation fails we
+ * return -ENOMEM.
+ **/
+static int igb_alloc_q_vectors(struct igb_adapter *adapter)
+{
+	struct igb_q_vector *q_vector;
+	struct e1000_hw *hw = &adapter->hw;
+	int v_idx;
+	int orig_node = adapter->node;
+
+	for (v_idx = 0; v_idx < adapter->num_q_vectors; v_idx++) {
+		if ((adapter->num_q_vectors == (adapter->num_rx_queues +
+						adapter->num_tx_queues)) &&
+		    (adapter->num_rx_queues == v_idx))
+			adapter->node = orig_node;
+		if (orig_node == -1) {
+			int cur_node = next_online_node(adapter->node);
+			if (cur_node == MAX_NUMNODES)
+				cur_node = first_online_node;
+			adapter->node = cur_node;
+		}
+		q_vector = kzalloc_node(sizeof(struct igb_q_vector), GFP_KERNEL,
+					adapter->node);
+		if (!q_vector)
+			q_vector = kzalloc(sizeof(struct igb_q_vector),
+					   GFP_KERNEL);
+		if (!q_vector)
+			goto err_out;
+		q_vector->adapter = adapter;
+		q_vector->itr_register = hw->hw_addr + E1000_EITR(0);
+		q_vector->itr_val = IGB_START_ITR;
+		netif_napi_add(adapter->netdev, &q_vector->napi, igb_poll, 64);
+		adapter->q_vector[v_idx] = q_vector;
+	}
+	/* Restore the adapter's original node */
+	adapter->node = orig_node;
+
+	return 0;
+
+err_out:
+	/* Restore the adapter's original node */
+	adapter->node = orig_node;
+	igb_free_q_vectors(adapter);
+	return -ENOMEM;
+}
+
+static void igb_map_rx_ring_to_vector(struct igb_adapter *adapter,
+                                      int ring_idx, int v_idx)
+{
+	struct igb_q_vector *q_vector = adapter->q_vector[v_idx];
+
+	q_vector->rx.ring = adapter->rx_ring[ring_idx];
+	q_vector->rx.ring->q_vector = q_vector;
+	q_vector->rx.count++;
+	q_vector->itr_val = adapter->rx_itr_setting;
+	if (q_vector->itr_val && q_vector->itr_val <= 3)
+		q_vector->itr_val = IGB_START_ITR;
+}
+
+static void igb_map_tx_ring_to_vector(struct igb_adapter *adapter,
+                                      int ring_idx, int v_idx)
+{
+	struct igb_q_vector *q_vector = adapter->q_vector[v_idx];
+
+	q_vector->tx.ring = adapter->tx_ring[ring_idx];
+	q_vector->tx.ring->q_vector = q_vector;
+	q_vector->tx.count++;
+	q_vector->itr_val = adapter->tx_itr_setting;
+	q_vector->tx.work_limit = adapter->tx_work_limit;
+	if (q_vector->itr_val && q_vector->itr_val <= 3)
+		q_vector->itr_val = IGB_START_ITR;
+}
+
+/**
+ * igb_map_ring_to_vector - maps allocated queues to vectors
+ *
+ * This function maps the recently allocated queues to vectors.
+ **/
+static int igb_map_ring_to_vector(struct igb_adapter *adapter)
+{
+	int i;
+	int v_idx = 0;
+
+	if ((adapter->num_q_vectors < adapter->num_rx_queues) ||
+	    (adapter->num_q_vectors < adapter->num_tx_queues))
+		return -ENOMEM;
+
+	if (adapter->num_q_vectors >=
+	    (adapter->num_rx_queues + adapter->num_tx_queues)) {
+		for (i = 0; i < adapter->num_rx_queues; i++)
+			igb_map_rx_ring_to_vector(adapter, i, v_idx++);
+		for (i = 0; i < adapter->num_tx_queues; i++)
+			igb_map_tx_ring_to_vector(adapter, i, v_idx++);
+	} else {
+		for (i = 0; i < adapter->num_rx_queues; i++) {
+			if (i < adapter->num_tx_queues)
+				igb_map_tx_ring_to_vector(adapter, i, v_idx);
+			igb_map_rx_ring_to_vector(adapter, i, v_idx++);
+		}
+		for (; i < adapter->num_tx_queues; i++)
+			igb_map_tx_ring_to_vector(adapter, i, v_idx++);
+	}
+	return 0;
+}
+
+/**
+ * igb_init_interrupt_scheme - initialize interrupts, allocate queues/vectors
+ *
+ * This function initializes the interrupts and allocates all of the queues.
+ **/
+static int igb_init_interrupt_scheme(struct igb_adapter *adapter)
+{
+	struct pci_dev *pdev = adapter->pdev;
+	int err;
+
+	err = igb_set_interrupt_capability(adapter);
+	if (err)
+		return err;
+
+	err = igb_alloc_q_vectors(adapter);
+	if (err) {
+		dev_err(&pdev->dev, "Unable to allocate memory for vectors\n");
+		goto err_alloc_q_vectors;
+	}
+
+	err = igb_alloc_queues(adapter);
+	if (err) {
+		dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
+		goto err_alloc_queues;
+	}
+
+	err = igb_map_ring_to_vector(adapter);
+	if (err) {
+		dev_err(&pdev->dev, "Invalid q_vector to ring mapping\n");
+		goto err_map_queues;
+	}
+
+
+	return 0;
+err_map_queues:
+	igb_free_queues(adapter);
+err_alloc_queues:
+	igb_free_q_vectors(adapter);
+err_alloc_q_vectors:
+	igb_reset_interrupt_capability(adapter);
+	return err;
+}
+
+/**
+ * igb_request_irq - initialize interrupts
+ *
+ * Attempts to configure interrupts using the best available
+ * capabilities of the hardware and kernel.
+ **/
+static int igb_request_irq(struct igb_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	struct pci_dev *pdev = adapter->pdev;
+	int err = 0;
+
+	if (adapter->msix_entries) {
+		err = igb_request_msix(adapter);
+		if (!err)
+			goto request_done;
+		/* fall back to MSI */
+		igb_clear_interrupt_scheme(adapter);
+		if (!pci_enable_msi(pdev))
+			adapter->flags |= IGB_FLAG_HAS_MSI;
+		igb_free_all_tx_resources(adapter);
+		igb_free_all_rx_resources(adapter);
+		adapter->num_tx_queues = 1;
+		adapter->num_rx_queues = 1;
+		adapter->num_q_vectors = 1;
+		err = igb_alloc_q_vectors(adapter);
+		if (err) {
+			dev_err(&pdev->dev,
+			        "Unable to allocate memory for vectors\n");
+			goto request_done;
+		}
+		err = igb_alloc_queues(adapter);
+		if (err) {
+			dev_err(&pdev->dev,
+			        "Unable to allocate memory for queues\n");
+			igb_free_q_vectors(adapter);
+			goto request_done;
+		}
+		igb_setup_all_tx_resources(adapter);
+		igb_setup_all_rx_resources(adapter);
+	}
+
+	igb_assign_vector(adapter->q_vector[0], 0);
+
+	if (adapter->flags & IGB_FLAG_HAS_MSI) {
+		err = request_irq(pdev->irq, igb_intr_msi, 0,
+				  netdev->name, adapter);
+		if (!err)
+			goto request_done;
+
+		/* fall back to legacy interrupts */
+		igb_reset_interrupt_capability(adapter);
+		adapter->flags &= ~IGB_FLAG_HAS_MSI;
+	}
+
+	err = request_irq(pdev->irq, igb_intr, IRQF_SHARED,
+			  netdev->name, adapter);
+
+	if (err)
+		dev_err(&pdev->dev, "Error %d getting interrupt\n",
+			err);
+
+request_done:
+	return err;
+}
+
+static void igb_free_irq(struct igb_adapter *adapter)
+{
+	if (adapter->msix_entries) {
+		int vector = 0, i;
+
+		free_irq(adapter->msix_entries[vector++].vector, adapter);
+
+		for (i = 0; i < adapter->num_q_vectors; i++)
+			free_irq(adapter->msix_entries[vector++].vector,
+				 adapter->q_vector[i]);
+	} else {
+		free_irq(adapter->pdev->irq, adapter);
+	}
+}
+
+/**
+ * igb_irq_disable - Mask off interrupt generation on the NIC
+ * @adapter: board private structure
+ **/
+static void igb_irq_disable(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+
+	/*
+	 * we need to be careful when disabling interrupts.  The VFs are also
+	 * mapped into these registers and so clearing the bits can cause
+	 * issues on the VF drivers so we only need to clear what we set
+	 */
+	if (adapter->msix_entries) {
+		u32 regval = rd32(E1000_EIAM);
+		wr32(E1000_EIAM, regval & ~adapter->eims_enable_mask);
+		wr32(E1000_EIMC, adapter->eims_enable_mask);
+		regval = rd32(E1000_EIAC);
+		wr32(E1000_EIAC, regval & ~adapter->eims_enable_mask);
+	}
+
+	wr32(E1000_IAM, 0);
+	wr32(E1000_IMC, ~0);
+	wrfl();
+	if (adapter->msix_entries) {
+		int i;
+		for (i = 0; i < adapter->num_q_vectors; i++)
+			synchronize_irq(adapter->msix_entries[i].vector);
+	} else {
+		synchronize_irq(adapter->pdev->irq);
+	}
+}
+
+/**
+ * igb_irq_enable - Enable default interrupt generation settings
+ * @adapter: board private structure
+ **/
+static void igb_irq_enable(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+
+	if (adapter->msix_entries) {
+		u32 ims = E1000_IMS_LSC | E1000_IMS_DOUTSYNC | E1000_IMS_DRSTA;
+		u32 regval = rd32(E1000_EIAC);
+		wr32(E1000_EIAC, regval | adapter->eims_enable_mask);
+		regval = rd32(E1000_EIAM);
+		wr32(E1000_EIAM, regval | adapter->eims_enable_mask);
+		wr32(E1000_EIMS, adapter->eims_enable_mask);
+		if (adapter->vfs_allocated_count) {
+			wr32(E1000_MBVFIMR, 0xFF);
+			ims |= E1000_IMS_VMMB;
+		}
+		wr32(E1000_IMS, ims);
+	} else {
+		wr32(E1000_IMS, IMS_ENABLE_MASK |
+				E1000_IMS_DRSTA);
+		wr32(E1000_IAM, IMS_ENABLE_MASK |
+				E1000_IMS_DRSTA);
+	}
+}
+
+static void igb_update_mng_vlan(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u16 vid = adapter->hw.mng_cookie.vlan_id;
+	u16 old_vid = adapter->mng_vlan_id;
+
+	if (hw->mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN) {
+		/* add VID to filter table */
+		igb_vfta_set(hw, vid, true);
+		adapter->mng_vlan_id = vid;
+	} else {
+		adapter->mng_vlan_id = IGB_MNG_VLAN_NONE;
+	}
+
+	if ((old_vid != (u16)IGB_MNG_VLAN_NONE) &&
+	    (vid != old_vid) &&
+	    !test_bit(old_vid, adapter->active_vlans)) {
+		/* remove VID from filter table */
+		igb_vfta_set(hw, old_vid, false);
+	}
+}
+
+/**
+ * igb_release_hw_control - release control of the h/w to f/w
+ * @adapter: address of board private structure
+ *
+ * igb_release_hw_control resets CTRL_EXT:DRV_LOAD bit.
+ * For ASF and Pass Through versions of f/w this means that the
+ * driver is no longer loaded.
+ *
+ **/
+static void igb_release_hw_control(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 ctrl_ext;
+
+	/* Let firmware take over control of h/w */
+	ctrl_ext = rd32(E1000_CTRL_EXT);
+	wr32(E1000_CTRL_EXT,
+			ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
+}
+
+/**
+ * igb_get_hw_control - get control of the h/w from f/w
+ * @adapter: address of board private structure
+ *
+ * igb_get_hw_control sets CTRL_EXT:DRV_LOAD bit.
+ * For ASF and Pass Through versions of f/w this means that
+ * the driver is loaded.
+ *
+ **/
+static void igb_get_hw_control(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 ctrl_ext;
+
+	/* Let firmware know the driver has taken over */
+	ctrl_ext = rd32(E1000_CTRL_EXT);
+	wr32(E1000_CTRL_EXT,
+			ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
+}
+
+/**
+ * igb_configure - configure the hardware for RX and TX
+ * @adapter: private board structure
+ **/
+static void igb_configure(struct igb_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	int i;
+
+	igb_get_hw_control(adapter);
+	igb_set_rx_mode(netdev);
+
+	igb_restore_vlan(adapter);
+
+	igb_setup_tctl(adapter);
+	igb_setup_mrqc(adapter);
+	igb_setup_rctl(adapter);
+
+	igb_configure_tx(adapter);
+	igb_configure_rx(adapter);
+
+	igb_rx_fifo_flush_82575(&adapter->hw);
+
+	/* call igb_desc_unused which always leaves
+	 * at least 1 descriptor unused to make sure
+	 * next_to_use != next_to_clean */
+	for (i = 0; i < adapter->num_rx_queues; i++) {
+		struct igb_ring *ring = adapter->rx_ring[i];
+		igb_alloc_rx_buffers(ring, igb_desc_unused(ring));
+	}
+}
+
+/**
+ * igb_power_up_link - Power up the phy/serdes link
+ * @adapter: address of board private structure
+ **/
+void igb_power_up_link(struct igb_adapter *adapter)
+{
+	if (adapter->hw.phy.media_type == e1000_media_type_copper)
+		igb_power_up_phy_copper(&adapter->hw);
+	else
+		igb_power_up_serdes_link_82575(&adapter->hw);
+}
+
+/**
+ * igb_power_down_link - Power down the phy/serdes link
+ * @adapter: address of board private structure
+ */
+static void igb_power_down_link(struct igb_adapter *adapter)
+{
+	if (adapter->hw.phy.media_type == e1000_media_type_copper)
+		igb_power_down_phy_copper_82575(&adapter->hw);
+	else
+		igb_shutdown_serdes_link_82575(&adapter->hw);
+}
+
+/**
+ * igb_up - Open the interface and prepare it to handle traffic
+ * @adapter: board private structure
+ **/
+int igb_up(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	int i;
+
+	/* hardware has been reset, we need to reload some things */
+	igb_configure(adapter);
+
+	clear_bit(__IGB_DOWN, &adapter->state);
+
+	for (i = 0; i < adapter->num_q_vectors; i++)
+		napi_enable(&(adapter->q_vector[i]->napi));
+
+	if (adapter->msix_entries)
+		igb_configure_msix(adapter);
+	else
+		igb_assign_vector(adapter->q_vector[0], 0);
+
+	/* Clear any pending interrupts. */
+	rd32(E1000_ICR);
+	igb_irq_enable(adapter);
+
+	/* notify VFs that reset has been completed */
+	if (adapter->vfs_allocated_count) {
+		u32 reg_data = rd32(E1000_CTRL_EXT);
+		reg_data |= E1000_CTRL_EXT_PFRSTD;
+		wr32(E1000_CTRL_EXT, reg_data);
+	}
+
+	netif_tx_start_all_queues(adapter->netdev);
+
+	/* start the watchdog. */
+	hw->mac.get_link_status = 1;
+	schedule_work(&adapter->watchdog_task);
+
+	return 0;
+}
+
+void igb_down(struct igb_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	struct e1000_hw *hw = &adapter->hw;
+	u32 tctl, rctl;
+	int i;
+
+	/* signal that we're down so the interrupt handler does not
+	 * reschedule our watchdog timer */
+	set_bit(__IGB_DOWN, &adapter->state);
+
+	/* disable receives in the hardware */
+	rctl = rd32(E1000_RCTL);
+	wr32(E1000_RCTL, rctl & ~E1000_RCTL_EN);
+	/* flush and sleep below */
+
+	netif_tx_stop_all_queues(netdev);
+
+	/* disable transmits in the hardware */
+	tctl = rd32(E1000_TCTL);
+	tctl &= ~E1000_TCTL_EN;
+	wr32(E1000_TCTL, tctl);
+	/* flush both disables and wait for them to finish */
+	wrfl();
+	msleep(10);
+
+	for (i = 0; i < adapter->num_q_vectors; i++)
+		napi_disable(&(adapter->q_vector[i]->napi));
+
+	igb_irq_disable(adapter);
+
+	del_timer_sync(&adapter->watchdog_timer);
+	del_timer_sync(&adapter->phy_info_timer);
+
+	netif_carrier_off(netdev);
+
+	/* record the stats before reset*/
+	spin_lock(&adapter->stats64_lock);
+	igb_update_stats(adapter, &adapter->stats64);
+	spin_unlock(&adapter->stats64_lock);
+
+	adapter->link_speed = 0;
+	adapter->link_duplex = 0;
+
+	if (!pci_channel_offline(adapter->pdev))
+		igb_reset(adapter);
+	igb_clean_all_tx_rings(adapter);
+	igb_clean_all_rx_rings(adapter);
+#ifdef CONFIG_IGB_DCA
+
+	/* since we reset the hardware DCA settings were cleared */
+	igb_setup_dca(adapter);
+#endif
+}
+
+void igb_reinit_locked(struct igb_adapter *adapter)
+{
+	WARN_ON(in_interrupt());
+	while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
+		msleep(1);
+	igb_down(adapter);
+	igb_up(adapter);
+	clear_bit(__IGB_RESETTING, &adapter->state);
+}
+
+void igb_reset(struct igb_adapter *adapter)
+{
+	struct pci_dev *pdev = adapter->pdev;
+	struct e1000_hw *hw = &adapter->hw;
+	struct e1000_mac_info *mac = &hw->mac;
+	struct e1000_fc_info *fc = &hw->fc;
+	u32 pba = 0, tx_space, min_tx_space, min_rx_space;
+	u16 hwm;
+
+	/* Repartition Pba for greater than 9k mtu
+	 * To take effect CTRL.RST is required.
+	 */
+	switch (mac->type) {
+	case e1000_i350:
+	case e1000_82580:
+		pba = rd32(E1000_RXPBS);
+		pba = igb_rxpbs_adjust_82580(pba);
+		break;
+	case e1000_82576:
+		pba = rd32(E1000_RXPBS);
+		pba &= E1000_RXPBS_SIZE_MASK_82576;
+		break;
+	case e1000_82575:
+	default:
+		pba = E1000_PBA_34K;
+		break;
+	}
+
+	if ((adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) &&
+	    (mac->type < e1000_82576)) {
+		/* adjust PBA for jumbo frames */
+		wr32(E1000_PBA, pba);
+
+		/* To maintain wire speed transmits, the Tx FIFO should be
+		 * large enough to accommodate two full transmit packets,
+		 * rounded up to the next 1KB and expressed in KB.  Likewise,
+		 * the Rx FIFO should be large enough to accommodate at least
+		 * one full receive packet and is similarly rounded up and
+		 * expressed in KB. */
+		pba = rd32(E1000_PBA);
+		/* upper 16 bits has Tx packet buffer allocation size in KB */
+		tx_space = pba >> 16;
+		/* lower 16 bits has Rx packet buffer allocation size in KB */
+		pba &= 0xffff;
+		/* the tx fifo also stores 16 bytes of information about the tx
+		 * but don't include ethernet FCS because hardware appends it */
+		min_tx_space = (adapter->max_frame_size +
+				sizeof(union e1000_adv_tx_desc) -
+				ETH_FCS_LEN) * 2;
+		min_tx_space = ALIGN(min_tx_space, 1024);
+		min_tx_space >>= 10;
+		/* software strips receive CRC, so leave room for it */
+		min_rx_space = adapter->max_frame_size;
+		min_rx_space = ALIGN(min_rx_space, 1024);
+		min_rx_space >>= 10;
+
+		/* If current Tx allocation is less than the min Tx FIFO size,
+		 * and the min Tx FIFO size is less than the current Rx FIFO
+		 * allocation, take space away from current Rx allocation */
+		if (tx_space < min_tx_space &&
+		    ((min_tx_space - tx_space) < pba)) {
+			pba = pba - (min_tx_space - tx_space);
+
+			/* if short on rx space, rx wins and must trump tx
+			 * adjustment */
+			if (pba < min_rx_space)
+				pba = min_rx_space;
+		}
+		wr32(E1000_PBA, pba);
+	}
+
+	/* flow control settings */
+	/* The high water mark must be low enough to fit one full frame
+	 * (or the size used for early receive) above it in the Rx FIFO.
+	 * Set it to the lower of:
+	 * - 90% of the Rx FIFO size, or
+	 * - the full Rx FIFO size minus one full frame */
+	hwm = min(((pba << 10) * 9 / 10),
+			((pba << 10) - 2 * adapter->max_frame_size));
+
+	fc->high_water = hwm & 0xFFF0;	/* 16-byte granularity */
+	fc->low_water = fc->high_water - 16;
+	fc->pause_time = 0xFFFF;
+	fc->send_xon = 1;
+	fc->current_mode = fc->requested_mode;
+
+	/* disable receive for all VFs and wait one second */
+	if (adapter->vfs_allocated_count) {
+		int i;
+		for (i = 0 ; i < adapter->vfs_allocated_count; i++)
+			adapter->vf_data[i].flags &= IGB_VF_FLAG_PF_SET_MAC;
+
+		/* ping all the active vfs to let them know we are going down */
+		igb_ping_all_vfs(adapter);
+
+		/* disable transmits and receives */
+		wr32(E1000_VFRE, 0);
+		wr32(E1000_VFTE, 0);
+	}
+
+	/* Allow time for pending master requests to run */
+	hw->mac.ops.reset_hw(hw);
+	wr32(E1000_WUC, 0);
+
+	if (hw->mac.ops.init_hw(hw))
+		dev_err(&pdev->dev, "Hardware Error\n");
+
+	igb_init_dmac(adapter, pba);
+	if (!netif_running(adapter->netdev))
+		igb_power_down_link(adapter);
+
+	igb_update_mng_vlan(adapter);
+
+	/* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
+	wr32(E1000_VET, ETHERNET_IEEE_VLAN_TYPE);
+
+	igb_get_phy_info(hw);
+}
+
+static u32 igb_fix_features(struct net_device *netdev, u32 features)
+{
+	/*
+	 * Since there is no support for separate rx/tx vlan accel
+	 * enable/disable make sure tx flag is always in same state as rx.
+	 */
+	if (features & NETIF_F_HW_VLAN_RX)
+		features |= NETIF_F_HW_VLAN_TX;
+	else
+		features &= ~NETIF_F_HW_VLAN_TX;
+
+	return features;
+}
+
+static int igb_set_features(struct net_device *netdev, u32 features)
+{
+	u32 changed = netdev->features ^ features;
+
+	if (changed & NETIF_F_HW_VLAN_RX)
+		igb_vlan_mode(netdev, features);
+
+	return 0;
+}
+
+static const struct net_device_ops igb_netdev_ops = {
+	.ndo_open		= igb_open,
+	.ndo_stop		= igb_close,
+	.ndo_start_xmit		= igb_xmit_frame,
+	.ndo_get_stats64	= igb_get_stats64,
+	.ndo_set_rx_mode	= igb_set_rx_mode,
+	.ndo_set_mac_address	= igb_set_mac,
+	.ndo_change_mtu		= igb_change_mtu,
+	.ndo_do_ioctl		= igb_ioctl,
+	.ndo_tx_timeout		= igb_tx_timeout,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_vlan_rx_add_vid	= igb_vlan_rx_add_vid,
+	.ndo_vlan_rx_kill_vid	= igb_vlan_rx_kill_vid,
+	.ndo_set_vf_mac		= igb_ndo_set_vf_mac,
+	.ndo_set_vf_vlan	= igb_ndo_set_vf_vlan,
+	.ndo_set_vf_tx_rate	= igb_ndo_set_vf_bw,
+	.ndo_get_vf_config	= igb_ndo_get_vf_config,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= igb_netpoll,
+#endif
+	.ndo_fix_features	= igb_fix_features,
+	.ndo_set_features	= igb_set_features,
+};
+
+/**
+ * igb_probe - Device Initialization Routine
+ * @pdev: PCI device information struct
+ * @ent: entry in igb_pci_tbl
+ *
+ * Returns 0 on success, negative on failure
+ *
+ * igb_probe initializes an adapter identified by a pci_dev structure.
+ * The OS initialization, configuring of the adapter private structure,
+ * and a hardware reset occur.
+ **/
+static int __devinit igb_probe(struct pci_dev *pdev,
+			       const struct pci_device_id *ent)
+{
+	struct net_device *netdev;
+	struct igb_adapter *adapter;
+	struct e1000_hw *hw;
+	u16 eeprom_data = 0;
+	s32 ret_val;
+	static int global_quad_port_a; /* global quad port a indication */
+	const struct e1000_info *ei = igb_info_tbl[ent->driver_data];
+	unsigned long mmio_start, mmio_len;
+	int err, pci_using_dac;
+	u16 eeprom_apme_mask = IGB_EEPROM_APME;
+	u8 part_str[E1000_PBANUM_LENGTH];
+
+	/* Catch broken hardware that put the wrong VF device ID in
+	 * the PCIe SR-IOV capability.
+	 */
+	if (pdev->is_virtfn) {
+		WARN(1, KERN_ERR "%s (%hx:%hx) should not be a VF!\n",
+		     pci_name(pdev), pdev->vendor, pdev->device);
+		return -EINVAL;
+	}
+
+	err = pci_enable_device_mem(pdev);
+	if (err)
+		return err;
+
+	pci_using_dac = 0;
+	err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64));
+	if (!err) {
+		err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
+		if (!err)
+			pci_using_dac = 1;
+	} else {
+		err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
+		if (err) {
+			err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
+			if (err) {
+				dev_err(&pdev->dev, "No usable DMA "
+					"configuration, aborting\n");
+				goto err_dma;
+			}
+		}
+	}
+
+	err = pci_request_selected_regions(pdev, pci_select_bars(pdev,
+	                                   IORESOURCE_MEM),
+	                                   igb_driver_name);
+	if (err)
+		goto err_pci_reg;
+
+	pci_enable_pcie_error_reporting(pdev);
+
+	pci_set_master(pdev);
+	pci_save_state(pdev);
+
+	err = -ENOMEM;
+	netdev = alloc_etherdev_mq(sizeof(struct igb_adapter),
+				   IGB_MAX_TX_QUEUES);
+	if (!netdev)
+		goto err_alloc_etherdev;
+
+	SET_NETDEV_DEV(netdev, &pdev->dev);
+
+	pci_set_drvdata(pdev, netdev);
+	adapter = netdev_priv(netdev);
+	adapter->netdev = netdev;
+	adapter->pdev = pdev;
+	hw = &adapter->hw;
+	hw->back = adapter;
+	adapter->msg_enable = NETIF_MSG_DRV | NETIF_MSG_PROBE;
+
+	mmio_start = pci_resource_start(pdev, 0);
+	mmio_len = pci_resource_len(pdev, 0);
+
+	err = -EIO;
+	hw->hw_addr = ioremap(mmio_start, mmio_len);
+	if (!hw->hw_addr)
+		goto err_ioremap;
+
+	netdev->netdev_ops = &igb_netdev_ops;
+	igb_set_ethtool_ops(netdev);
+	netdev->watchdog_timeo = 5 * HZ;
+
+	strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
+
+	netdev->mem_start = mmio_start;
+	netdev->mem_end = mmio_start + mmio_len;
+
+	/* PCI config space info */
+	hw->vendor_id = pdev->vendor;
+	hw->device_id = pdev->device;
+	hw->revision_id = pdev->revision;
+	hw->subsystem_vendor_id = pdev->subsystem_vendor;
+	hw->subsystem_device_id = pdev->subsystem_device;
+
+	/* Copy the default MAC, PHY and NVM function pointers */
+	memcpy(&hw->mac.ops, ei->mac_ops, sizeof(hw->mac.ops));
+	memcpy(&hw->phy.ops, ei->phy_ops, sizeof(hw->phy.ops));
+	memcpy(&hw->nvm.ops, ei->nvm_ops, sizeof(hw->nvm.ops));
+	/* Initialize skew-specific constants */
+	err = ei->get_invariants(hw);
+	if (err)
+		goto err_sw_init;
+
+	/* setup the private structure */
+	err = igb_sw_init(adapter);
+	if (err)
+		goto err_sw_init;
+
+	igb_get_bus_info_pcie(hw);
+
+	hw->phy.autoneg_wait_to_complete = false;
+
+	/* Copper options */
+	if (hw->phy.media_type == e1000_media_type_copper) {
+		hw->phy.mdix = AUTO_ALL_MODES;
+		hw->phy.disable_polarity_correction = false;
+		hw->phy.ms_type = e1000_ms_hw_default;
+	}
+
+	if (igb_check_reset_block(hw))
+		dev_info(&pdev->dev,
+			"PHY reset is blocked due to SOL/IDER session.\n");
+
+	/*
+	 * features is initialized to 0 in allocation, it might have bits
+	 * set by igb_sw_init so we should use an or instead of an
+	 * assignment.
+	 */
+	netdev->features |= NETIF_F_SG |
+			    NETIF_F_IP_CSUM |
+			    NETIF_F_IPV6_CSUM |
+			    NETIF_F_TSO |
+			    NETIF_F_TSO6 |
+			    NETIF_F_RXHASH |
+			    NETIF_F_RXCSUM |
+			    NETIF_F_HW_VLAN_RX |
+			    NETIF_F_HW_VLAN_TX;
+
+	/* copy netdev features into list of user selectable features */
+	netdev->hw_features |= netdev->features;
+
+	/* set this bit last since it cannot be part of hw_features */
+	netdev->features |= NETIF_F_HW_VLAN_FILTER;
+
+	netdev->vlan_features |= NETIF_F_TSO |
+				 NETIF_F_TSO6 |
+				 NETIF_F_IP_CSUM |
+				 NETIF_F_IPV6_CSUM |
+				 NETIF_F_SG;
+
+	if (pci_using_dac) {
+		netdev->features |= NETIF_F_HIGHDMA;
+		netdev->vlan_features |= NETIF_F_HIGHDMA;
+	}
+
+	if (hw->mac.type >= e1000_82576) {
+		netdev->hw_features |= NETIF_F_SCTP_CSUM;
+		netdev->features |= NETIF_F_SCTP_CSUM;
+	}
+
+	netdev->priv_flags |= IFF_UNICAST_FLT;
+
+	adapter->en_mng_pt = igb_enable_mng_pass_thru(hw);
+
+	/* before reading the NVM, reset the controller to put the device in a
+	 * known good starting state */
+	hw->mac.ops.reset_hw(hw);
+
+	/* make sure the NVM is good */
+	if (hw->nvm.ops.validate(hw) < 0) {
+		dev_err(&pdev->dev, "The NVM Checksum Is Not Valid\n");
+		err = -EIO;
+		goto err_eeprom;
+	}
+
+	/* copy the MAC address out of the NVM */
+	if (hw->mac.ops.read_mac_addr(hw))
+		dev_err(&pdev->dev, "NVM Read Error\n");
+
+	memcpy(netdev->dev_addr, hw->mac.addr, netdev->addr_len);
+	memcpy(netdev->perm_addr, hw->mac.addr, netdev->addr_len);
+
+	if (!is_valid_ether_addr(netdev->perm_addr)) {
+		dev_err(&pdev->dev, "Invalid MAC Address\n");
+		err = -EIO;
+		goto err_eeprom;
+	}
+
+	setup_timer(&adapter->watchdog_timer, igb_watchdog,
+	            (unsigned long) adapter);
+	setup_timer(&adapter->phy_info_timer, igb_update_phy_info,
+	            (unsigned long) adapter);
+
+	INIT_WORK(&adapter->reset_task, igb_reset_task);
+	INIT_WORK(&adapter->watchdog_task, igb_watchdog_task);
+
+	/* Initialize link properties that are user-changeable */
+	adapter->fc_autoneg = true;
+	hw->mac.autoneg = true;
+	hw->phy.autoneg_advertised = 0x2f;
+
+	hw->fc.requested_mode = e1000_fc_default;
+	hw->fc.current_mode = e1000_fc_default;
+
+	igb_validate_mdi_setting(hw);
+
+	/* Initial Wake on LAN setting If APM wake is enabled in the EEPROM,
+	 * enable the ACPI Magic Packet filter
+	 */
+
+	if (hw->bus.func == 0)
+		hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
+	else if (hw->mac.type >= e1000_82580)
+		hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A +
+		                 NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1,
+		                 &eeprom_data);
+	else if (hw->bus.func == 1)
+		hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
+
+	if (eeprom_data & eeprom_apme_mask)
+		adapter->eeprom_wol |= E1000_WUFC_MAG;
+
+	/* now that we have the eeprom settings, apply the special cases where
+	 * the eeprom may be wrong or the board simply won't support wake on
+	 * lan on a particular port */
+	switch (pdev->device) {
+	case E1000_DEV_ID_82575GB_QUAD_COPPER:
+		adapter->eeprom_wol = 0;
+		break;
+	case E1000_DEV_ID_82575EB_FIBER_SERDES:
+	case E1000_DEV_ID_82576_FIBER:
+	case E1000_DEV_ID_82576_SERDES:
+		/* Wake events only supported on port A for dual fiber
+		 * regardless of eeprom setting */
+		if (rd32(E1000_STATUS) & E1000_STATUS_FUNC_1)
+			adapter->eeprom_wol = 0;
+		break;
+	case E1000_DEV_ID_82576_QUAD_COPPER:
+	case E1000_DEV_ID_82576_QUAD_COPPER_ET2:
+		/* if quad port adapter, disable WoL on all but port A */
+		if (global_quad_port_a != 0)
+			adapter->eeprom_wol = 0;
+		else
+			adapter->flags |= IGB_FLAG_QUAD_PORT_A;
+		/* Reset for multiple quad port adapters */
+		if (++global_quad_port_a == 4)
+			global_quad_port_a = 0;
+		break;
+	}
+
+	/* initialize the wol settings based on the eeprom settings */
+	adapter->wol = adapter->eeprom_wol;
+	device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
+	/* reset the hardware with the new settings */
+	igb_reset(adapter);
+
+	/* let the f/w know that the h/w is now under the control of the
+	 * driver. */
+	igb_get_hw_control(adapter);
+
+	strcpy(netdev->name, "eth%d");
+	err = register_netdev(netdev);
+	if (err)
+		goto err_register;
+
+	/* carrier off reporting is important to ethtool even BEFORE open */
+	netif_carrier_off(netdev);
+
+#ifdef CONFIG_IGB_DCA
+	if (dca_add_requester(&pdev->dev) == 0) {
+		adapter->flags |= IGB_FLAG_DCA_ENABLED;
+		dev_info(&pdev->dev, "DCA enabled\n");
+		igb_setup_dca(adapter);
+	}
+
+#endif
+	/* do hw tstamp init after resetting */
+	igb_init_hw_timer(adapter);
+
+	dev_info(&pdev->dev, "Intel(R) Gigabit Ethernet Network Connection\n");
+	/* print bus type/speed/width info */
+	dev_info(&pdev->dev, "%s: (PCIe:%s:%s) %pM\n",
+		 netdev->name,
+		 ((hw->bus.speed == e1000_bus_speed_2500) ? "2.5Gb/s" :
+		  (hw->bus.speed == e1000_bus_speed_5000) ? "5.0Gb/s" :
+		                                            "unknown"),
+		 ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
+		  (hw->bus.width == e1000_bus_width_pcie_x2) ? "Width x2" :
+		  (hw->bus.width == e1000_bus_width_pcie_x1) ? "Width x1" :
+		   "unknown"),
+		 netdev->dev_addr);
+
+	ret_val = igb_read_part_string(hw, part_str, E1000_PBANUM_LENGTH);
+	if (ret_val)
+		strcpy(part_str, "Unknown");
+	dev_info(&pdev->dev, "%s: PBA No: %s\n", netdev->name, part_str);
+	dev_info(&pdev->dev,
+		"Using %s interrupts. %d rx queue(s), %d tx queue(s)\n",
+		adapter->msix_entries ? "MSI-X" :
+		(adapter->flags & IGB_FLAG_HAS_MSI) ? "MSI" : "legacy",
+		adapter->num_rx_queues, adapter->num_tx_queues);
+	switch (hw->mac.type) {
+	case e1000_i350:
+		igb_set_eee_i350(hw);
+		break;
+	default:
+		break;
+	}
+	return 0;
+
+err_register:
+	igb_release_hw_control(adapter);
+err_eeprom:
+	if (!igb_check_reset_block(hw))
+		igb_reset_phy(hw);
+
+	if (hw->flash_address)
+		iounmap(hw->flash_address);
+err_sw_init:
+	igb_clear_interrupt_scheme(adapter);
+	iounmap(hw->hw_addr);
+err_ioremap:
+	free_netdev(netdev);
+err_alloc_etherdev:
+	pci_release_selected_regions(pdev,
+	                             pci_select_bars(pdev, IORESOURCE_MEM));
+err_pci_reg:
+err_dma:
+	pci_disable_device(pdev);
+	return err;
+}
+
+/**
+ * igb_remove - Device Removal Routine
+ * @pdev: PCI device information struct
+ *
+ * igb_remove is called by the PCI subsystem to alert the driver
+ * that it should release a PCI device.  The could be caused by a
+ * Hot-Plug event, or because the driver is going to be removed from
+ * memory.
+ **/
+static void __devexit igb_remove(struct pci_dev *pdev)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+
+	/*
+	 * The watchdog timer may be rescheduled, so explicitly
+	 * disable watchdog from being rescheduled.
+	 */
+	set_bit(__IGB_DOWN, &adapter->state);
+	del_timer_sync(&adapter->watchdog_timer);
+	del_timer_sync(&adapter->phy_info_timer);
+
+	cancel_work_sync(&adapter->reset_task);
+	cancel_work_sync(&adapter->watchdog_task);
+
+#ifdef CONFIG_IGB_DCA
+	if (adapter->flags & IGB_FLAG_DCA_ENABLED) {
+		dev_info(&pdev->dev, "DCA disabled\n");
+		dca_remove_requester(&pdev->dev);
+		adapter->flags &= ~IGB_FLAG_DCA_ENABLED;
+		wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_DISABLE);
+	}
+#endif
+
+	/* Release control of h/w to f/w.  If f/w is AMT enabled, this
+	 * would have already happened in close and is redundant. */
+	igb_release_hw_control(adapter);
+
+	unregister_netdev(netdev);
+
+	igb_clear_interrupt_scheme(adapter);
+
+#ifdef CONFIG_PCI_IOV
+	/* reclaim resources allocated to VFs */
+	if (adapter->vf_data) {
+		/* disable iov and allow time for transactions to clear */
+		if (!igb_check_vf_assignment(adapter)) {
+			pci_disable_sriov(pdev);
+			msleep(500);
+		} else {
+			dev_info(&pdev->dev, "VF(s) assigned to guests!\n");
+		}
+
+		kfree(adapter->vf_data);
+		adapter->vf_data = NULL;
+		wr32(E1000_IOVCTL, E1000_IOVCTL_REUSE_VFQ);
+		wrfl();
+		msleep(100);
+		dev_info(&pdev->dev, "IOV Disabled\n");
+	}
+#endif
+
+	iounmap(hw->hw_addr);
+	if (hw->flash_address)
+		iounmap(hw->flash_address);
+	pci_release_selected_regions(pdev,
+	                             pci_select_bars(pdev, IORESOURCE_MEM));
+
+	kfree(adapter->shadow_vfta);
+	free_netdev(netdev);
+
+	pci_disable_pcie_error_reporting(pdev);
+
+	pci_disable_device(pdev);
+}
+
+/**
+ * igb_probe_vfs - Initialize vf data storage and add VFs to pci config space
+ * @adapter: board private structure to initialize
+ *
+ * This function initializes the vf specific data storage and then attempts to
+ * allocate the VFs.  The reason for ordering it this way is because it is much
+ * mor expensive time wise to disable SR-IOV than it is to allocate and free
+ * the memory for the VFs.
+ **/
+static void __devinit igb_probe_vfs(struct igb_adapter * adapter)
+{
+#ifdef CONFIG_PCI_IOV
+	struct pci_dev *pdev = adapter->pdev;
+	int old_vfs = igb_find_enabled_vfs(adapter);
+	int i;
+
+	if (old_vfs) {
+		dev_info(&pdev->dev, "%d pre-allocated VFs found - override "
+			 "max_vfs setting of %d\n", old_vfs, max_vfs);
+		adapter->vfs_allocated_count = old_vfs;
+	}
+
+	if (!adapter->vfs_allocated_count)
+		return;
+
+	adapter->vf_data = kcalloc(adapter->vfs_allocated_count,
+				sizeof(struct vf_data_storage), GFP_KERNEL);
+	/* if allocation failed then we do not support SR-IOV */
+	if (!adapter->vf_data) {
+		adapter->vfs_allocated_count = 0;
+		dev_err(&pdev->dev, "Unable to allocate memory for VF "
+			"Data Storage\n");
+		goto out;
+	}
+
+	if (!old_vfs) {
+		if (pci_enable_sriov(pdev, adapter->vfs_allocated_count))
+			goto err_out;
+	}
+	dev_info(&pdev->dev, "%d VFs allocated\n",
+		 adapter->vfs_allocated_count);
+	for (i = 0; i < adapter->vfs_allocated_count; i++)
+		igb_vf_configure(adapter, i);
+
+	/* DMA Coalescing is not supported in IOV mode. */
+	adapter->flags &= ~IGB_FLAG_DMAC;
+	goto out;
+err_out:
+	kfree(adapter->vf_data);
+	adapter->vf_data = NULL;
+	adapter->vfs_allocated_count = 0;
+out:
+	return;
+#endif /* CONFIG_PCI_IOV */
+}
+
+/**
+ * igb_init_hw_timer - Initialize hardware timer used with IEEE 1588 timestamp
+ * @adapter: board private structure to initialize
+ *
+ * igb_init_hw_timer initializes the function pointer and values for the hw
+ * timer found in hardware.
+ **/
+static void igb_init_hw_timer(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+
+	switch (hw->mac.type) {
+	case e1000_i350:
+	case e1000_82580:
+		memset(&adapter->cycles, 0, sizeof(adapter->cycles));
+		adapter->cycles.read = igb_read_clock;
+		adapter->cycles.mask = CLOCKSOURCE_MASK(64);
+		adapter->cycles.mult = 1;
+		/*
+		 * The 82580 timesync updates the system timer every 8ns by 8ns
+		 * and the value cannot be shifted.  Instead we need to shift
+		 * the registers to generate a 64bit timer value.  As a result
+		 * SYSTIMR/L/H, TXSTMPL/H, RXSTMPL/H all have to be shifted by
+		 * 24 in order to generate a larger value for synchronization.
+		 */
+		adapter->cycles.shift = IGB_82580_TSYNC_SHIFT;
+		/* disable system timer temporarily by setting bit 31 */
+		wr32(E1000_TSAUXC, 0x80000000);
+		wrfl();
+
+		/* Set registers so that rollover occurs soon to test this. */
+		wr32(E1000_SYSTIMR, 0x00000000);
+		wr32(E1000_SYSTIML, 0x80000000);
+		wr32(E1000_SYSTIMH, 0x000000FF);
+		wrfl();
+
+		/* enable system timer by clearing bit 31 */
+		wr32(E1000_TSAUXC, 0x0);
+		wrfl();
+
+		timecounter_init(&adapter->clock,
+				 &adapter->cycles,
+				 ktime_to_ns(ktime_get_real()));
+		/*
+		 * Synchronize our NIC clock against system wall clock. NIC
+		 * time stamp reading requires ~3us per sample, each sample
+		 * was pretty stable even under load => only require 10
+		 * samples for each offset comparison.
+		 */
+		memset(&adapter->compare, 0, sizeof(adapter->compare));
+		adapter->compare.source = &adapter->clock;
+		adapter->compare.target = ktime_get_real;
+		adapter->compare.num_samples = 10;
+		timecompare_update(&adapter->compare, 0);
+		break;
+	case e1000_82576:
+		/*
+		 * Initialize hardware timer: we keep it running just in case
+		 * that some program needs it later on.
+		 */
+		memset(&adapter->cycles, 0, sizeof(adapter->cycles));
+		adapter->cycles.read = igb_read_clock;
+		adapter->cycles.mask = CLOCKSOURCE_MASK(64);
+		adapter->cycles.mult = 1;
+		/**
+		 * Scale the NIC clock cycle by a large factor so that
+		 * relatively small clock corrections can be added or
+		 * subtracted at each clock tick. The drawbacks of a large
+		 * factor are a) that the clock register overflows more quickly
+		 * (not such a big deal) and b) that the increment per tick has
+		 * to fit into 24 bits.  As a result we need to use a shift of
+		 * 19 so we can fit a value of 16 into the TIMINCA register.
+		 */
+		adapter->cycles.shift = IGB_82576_TSYNC_SHIFT;
+		wr32(E1000_TIMINCA,
+		                (1 << E1000_TIMINCA_16NS_SHIFT) |
+		                (16 << IGB_82576_TSYNC_SHIFT));
+
+		/* Set registers so that rollover occurs soon to test this. */
+		wr32(E1000_SYSTIML, 0x00000000);
+		wr32(E1000_SYSTIMH, 0xFF800000);
+		wrfl();
+
+		timecounter_init(&adapter->clock,
+				 &adapter->cycles,
+				 ktime_to_ns(ktime_get_real()));
+		/*
+		 * Synchronize our NIC clock against system wall clock. NIC
+		 * time stamp reading requires ~3us per sample, each sample
+		 * was pretty stable even under load => only require 10
+		 * samples for each offset comparison.
+		 */
+		memset(&adapter->compare, 0, sizeof(adapter->compare));
+		adapter->compare.source = &adapter->clock;
+		adapter->compare.target = ktime_get_real;
+		adapter->compare.num_samples = 10;
+		timecompare_update(&adapter->compare, 0);
+		break;
+	case e1000_82575:
+		/* 82575 does not support timesync */
+	default:
+		break;
+	}
+
+}
+
+/**
+ * igb_sw_init - Initialize general software structures (struct igb_adapter)
+ * @adapter: board private structure to initialize
+ *
+ * igb_sw_init initializes the Adapter private data structure.
+ * Fields are initialized based on PCI device information and
+ * OS network device settings (MTU size).
+ **/
+static int __devinit igb_sw_init(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	struct net_device *netdev = adapter->netdev;
+	struct pci_dev *pdev = adapter->pdev;
+
+	pci_read_config_word(pdev, PCI_COMMAND, &hw->bus.pci_cmd_word);
+
+	/* set default ring sizes */
+	adapter->tx_ring_count = IGB_DEFAULT_TXD;
+	adapter->rx_ring_count = IGB_DEFAULT_RXD;
+
+	/* set default ITR values */
+	adapter->rx_itr_setting = IGB_DEFAULT_ITR;
+	adapter->tx_itr_setting = IGB_DEFAULT_ITR;
+
+	/* set default work limits */
+	adapter->tx_work_limit = IGB_DEFAULT_TX_WORK;
+
+	adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN +
+				  VLAN_HLEN;
+	adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
+
+	adapter->node = -1;
+
+	spin_lock_init(&adapter->stats64_lock);
+#ifdef CONFIG_PCI_IOV
+	switch (hw->mac.type) {
+	case e1000_82576:
+	case e1000_i350:
+		if (max_vfs > 7) {
+			dev_warn(&pdev->dev,
+				 "Maximum of 7 VFs per PF, using max\n");
+			adapter->vfs_allocated_count = 7;
+		} else
+			adapter->vfs_allocated_count = max_vfs;
+		break;
+	default:
+		break;
+	}
+#endif /* CONFIG_PCI_IOV */
+	adapter->rss_queues = min_t(u32, IGB_MAX_RX_QUEUES, num_online_cpus());
+	/* i350 cannot do RSS and SR-IOV at the same time */
+	if (hw->mac.type == e1000_i350 && adapter->vfs_allocated_count)
+		adapter->rss_queues = 1;
+
+	/*
+	 * if rss_queues > 4 or vfs are going to be allocated with rss_queues
+	 * then we should combine the queues into a queue pair in order to
+	 * conserve interrupts due to limited supply
+	 */
+	if ((adapter->rss_queues > 4) ||
+	    ((adapter->rss_queues > 1) && (adapter->vfs_allocated_count > 6)))
+		adapter->flags |= IGB_FLAG_QUEUE_PAIRS;
+
+	/* Setup and initialize a copy of the hw vlan table array */
+	adapter->shadow_vfta = kzalloc(sizeof(u32) *
+				E1000_VLAN_FILTER_TBL_SIZE,
+				GFP_ATOMIC);
+
+	/* This call may decrease the number of queues */
+	if (igb_init_interrupt_scheme(adapter)) {
+		dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
+		return -ENOMEM;
+	}
+
+	igb_probe_vfs(adapter);
+
+	/* Explicitly disable IRQ since the NIC can be in any state. */
+	igb_irq_disable(adapter);
+
+	if (hw->mac.type == e1000_i350)
+		adapter->flags &= ~IGB_FLAG_DMAC;
+
+	set_bit(__IGB_DOWN, &adapter->state);
+	return 0;
+}
+
+/**
+ * igb_open - Called when a network interface is made active
+ * @netdev: network interface device structure
+ *
+ * Returns 0 on success, negative value on failure
+ *
+ * The open entry point is called when a network interface is made
+ * active by the system (IFF_UP).  At this point all resources needed
+ * for transmit and receive operations are allocated, the interrupt
+ * handler is registered with the OS, the watchdog timer is started,
+ * and the stack is notified that the interface is ready.
+ **/
+static int igb_open(struct net_device *netdev)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	int err;
+	int i;
+
+	/* disallow open during test */
+	if (test_bit(__IGB_TESTING, &adapter->state))
+		return -EBUSY;
+
+	netif_carrier_off(netdev);
+
+	/* allocate transmit descriptors */
+	err = igb_setup_all_tx_resources(adapter);
+	if (err)
+		goto err_setup_tx;
+
+	/* allocate receive descriptors */
+	err = igb_setup_all_rx_resources(adapter);
+	if (err)
+		goto err_setup_rx;
+
+	igb_power_up_link(adapter);
+
+	/* before we allocate an interrupt, we must be ready to handle it.
+	 * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
+	 * as soon as we call pci_request_irq, so we have to setup our
+	 * clean_rx handler before we do so.  */
+	igb_configure(adapter);
+
+	err = igb_request_irq(adapter);
+	if (err)
+		goto err_req_irq;
+
+	/* From here on the code is the same as igb_up() */
+	clear_bit(__IGB_DOWN, &adapter->state);
+
+	for (i = 0; i < adapter->num_q_vectors; i++)
+		napi_enable(&(adapter->q_vector[i]->napi));
+
+	/* Clear any pending interrupts. */
+	rd32(E1000_ICR);
+
+	igb_irq_enable(adapter);
+
+	/* notify VFs that reset has been completed */
+	if (adapter->vfs_allocated_count) {
+		u32 reg_data = rd32(E1000_CTRL_EXT);
+		reg_data |= E1000_CTRL_EXT_PFRSTD;
+		wr32(E1000_CTRL_EXT, reg_data);
+	}
+
+	netif_tx_start_all_queues(netdev);
+
+	/* start the watchdog. */
+	hw->mac.get_link_status = 1;
+	schedule_work(&adapter->watchdog_task);
+
+	return 0;
+
+err_req_irq:
+	igb_release_hw_control(adapter);
+	igb_power_down_link(adapter);
+	igb_free_all_rx_resources(adapter);
+err_setup_rx:
+	igb_free_all_tx_resources(adapter);
+err_setup_tx:
+	igb_reset(adapter);
+
+	return err;
+}
+
+/**
+ * igb_close - Disables a network interface
+ * @netdev: network interface device structure
+ *
+ * Returns 0, this is not allowed to fail
+ *
+ * The close entry point is called when an interface is de-activated
+ * by the OS.  The hardware is still under the driver's control, but
+ * needs to be disabled.  A global MAC reset is issued to stop the
+ * hardware, and all transmit and receive resources are freed.
+ **/
+static int igb_close(struct net_device *netdev)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+
+	WARN_ON(test_bit(__IGB_RESETTING, &adapter->state));
+	igb_down(adapter);
+
+	igb_free_irq(adapter);
+
+	igb_free_all_tx_resources(adapter);
+	igb_free_all_rx_resources(adapter);
+
+	return 0;
+}
+
+/**
+ * igb_setup_tx_resources - allocate Tx resources (Descriptors)
+ * @tx_ring: tx descriptor ring (for a specific queue) to setup
+ *
+ * Return 0 on success, negative on failure
+ **/
+int igb_setup_tx_resources(struct igb_ring *tx_ring)
+{
+	struct device *dev = tx_ring->dev;
+	int orig_node = dev_to_node(dev);
+	int size;
+
+	size = sizeof(struct igb_tx_buffer) * tx_ring->count;
+	tx_ring->tx_buffer_info = vzalloc_node(size, tx_ring->numa_node);
+	if (!tx_ring->tx_buffer_info)
+		tx_ring->tx_buffer_info = vzalloc(size);
+	if (!tx_ring->tx_buffer_info)
+		goto err;
+
+	/* round up to nearest 4K */
+	tx_ring->size = tx_ring->count * sizeof(union e1000_adv_tx_desc);
+	tx_ring->size = ALIGN(tx_ring->size, 4096);
+
+	set_dev_node(dev, tx_ring->numa_node);
+	tx_ring->desc = dma_alloc_coherent(dev,
+					   tx_ring->size,
+					   &tx_ring->dma,
+					   GFP_KERNEL);
+	set_dev_node(dev, orig_node);
+	if (!tx_ring->desc)
+		tx_ring->desc = dma_alloc_coherent(dev,
+						   tx_ring->size,
+						   &tx_ring->dma,
+						   GFP_KERNEL);
+
+	if (!tx_ring->desc)
+		goto err;
+
+	tx_ring->next_to_use = 0;
+	tx_ring->next_to_clean = 0;
+
+	return 0;
+
+err:
+	vfree(tx_ring->tx_buffer_info);
+	dev_err(dev,
+		"Unable to allocate memory for the transmit descriptor ring\n");
+	return -ENOMEM;
+}
+
+/**
+ * igb_setup_all_tx_resources - wrapper to allocate Tx resources
+ *				  (Descriptors) for all queues
+ * @adapter: board private structure
+ *
+ * Return 0 on success, negative on failure
+ **/
+static int igb_setup_all_tx_resources(struct igb_adapter *adapter)
+{
+	struct pci_dev *pdev = adapter->pdev;
+	int i, err = 0;
+
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		err = igb_setup_tx_resources(adapter->tx_ring[i]);
+		if (err) {
+			dev_err(&pdev->dev,
+				"Allocation for Tx Queue %u failed\n", i);
+			for (i--; i >= 0; i--)
+				igb_free_tx_resources(adapter->tx_ring[i]);
+			break;
+		}
+	}
+
+	return err;
+}
+
+/**
+ * igb_setup_tctl - configure the transmit control registers
+ * @adapter: Board private structure
+ **/
+void igb_setup_tctl(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 tctl;
+
+	/* disable queue 0 which is enabled by default on 82575 and 82576 */
+	wr32(E1000_TXDCTL(0), 0);
+
+	/* Program the Transmit Control Register */
+	tctl = rd32(E1000_TCTL);
+	tctl &= ~E1000_TCTL_CT;
+	tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
+		(E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
+
+	igb_config_collision_dist(hw);
+
+	/* Enable transmits */
+	tctl |= E1000_TCTL_EN;
+
+	wr32(E1000_TCTL, tctl);
+}
+
+/**
+ * igb_configure_tx_ring - Configure transmit ring after Reset
+ * @adapter: board private structure
+ * @ring: tx ring to configure
+ *
+ * Configure a transmit ring after a reset.
+ **/
+void igb_configure_tx_ring(struct igb_adapter *adapter,
+                           struct igb_ring *ring)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 txdctl = 0;
+	u64 tdba = ring->dma;
+	int reg_idx = ring->reg_idx;
+
+	/* disable the queue */
+	wr32(E1000_TXDCTL(reg_idx), 0);
+	wrfl();
+	mdelay(10);
+
+	wr32(E1000_TDLEN(reg_idx),
+	                ring->count * sizeof(union e1000_adv_tx_desc));
+	wr32(E1000_TDBAL(reg_idx),
+	                tdba & 0x00000000ffffffffULL);
+	wr32(E1000_TDBAH(reg_idx), tdba >> 32);
+
+	ring->tail = hw->hw_addr + E1000_TDT(reg_idx);
+	wr32(E1000_TDH(reg_idx), 0);
+	writel(0, ring->tail);
+
+	txdctl |= IGB_TX_PTHRESH;
+	txdctl |= IGB_TX_HTHRESH << 8;
+	txdctl |= IGB_TX_WTHRESH << 16;
+
+	txdctl |= E1000_TXDCTL_QUEUE_ENABLE;
+	wr32(E1000_TXDCTL(reg_idx), txdctl);
+}
+
+/**
+ * igb_configure_tx - Configure transmit Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Tx unit of the MAC after a reset.
+ **/
+static void igb_configure_tx(struct igb_adapter *adapter)
+{
+	int i;
+
+	for (i = 0; i < adapter->num_tx_queues; i++)
+		igb_configure_tx_ring(adapter, adapter->tx_ring[i]);
+}
+
+/**
+ * igb_setup_rx_resources - allocate Rx resources (Descriptors)
+ * @rx_ring:    rx descriptor ring (for a specific queue) to setup
+ *
+ * Returns 0 on success, negative on failure
+ **/
+int igb_setup_rx_resources(struct igb_ring *rx_ring)
+{
+	struct device *dev = rx_ring->dev;
+	int orig_node = dev_to_node(dev);
+	int size, desc_len;
+
+	size = sizeof(struct igb_rx_buffer) * rx_ring->count;
+	rx_ring->rx_buffer_info = vzalloc_node(size, rx_ring->numa_node);
+	if (!rx_ring->rx_buffer_info)
+		rx_ring->rx_buffer_info = vzalloc(size);
+	if (!rx_ring->rx_buffer_info)
+		goto err;
+
+	desc_len = sizeof(union e1000_adv_rx_desc);
+
+	/* Round up to nearest 4K */
+	rx_ring->size = rx_ring->count * desc_len;
+	rx_ring->size = ALIGN(rx_ring->size, 4096);
+
+	set_dev_node(dev, rx_ring->numa_node);
+	rx_ring->desc = dma_alloc_coherent(dev,
+					   rx_ring->size,
+					   &rx_ring->dma,
+					   GFP_KERNEL);
+	set_dev_node(dev, orig_node);
+	if (!rx_ring->desc)
+		rx_ring->desc = dma_alloc_coherent(dev,
+						   rx_ring->size,
+						   &rx_ring->dma,
+						   GFP_KERNEL);
+
+	if (!rx_ring->desc)
+		goto err;
+
+	rx_ring->next_to_clean = 0;
+	rx_ring->next_to_use = 0;
+
+	return 0;
+
+err:
+	vfree(rx_ring->rx_buffer_info);
+	rx_ring->rx_buffer_info = NULL;
+	dev_err(dev, "Unable to allocate memory for the receive descriptor"
+		" ring\n");
+	return -ENOMEM;
+}
+
+/**
+ * igb_setup_all_rx_resources - wrapper to allocate Rx resources
+ *				  (Descriptors) for all queues
+ * @adapter: board private structure
+ *
+ * Return 0 on success, negative on failure
+ **/
+static int igb_setup_all_rx_resources(struct igb_adapter *adapter)
+{
+	struct pci_dev *pdev = adapter->pdev;
+	int i, err = 0;
+
+	for (i = 0; i < adapter->num_rx_queues; i++) {
+		err = igb_setup_rx_resources(adapter->rx_ring[i]);
+		if (err) {
+			dev_err(&pdev->dev,
+				"Allocation for Rx Queue %u failed\n", i);
+			for (i--; i >= 0; i--)
+				igb_free_rx_resources(adapter->rx_ring[i]);
+			break;
+		}
+	}
+
+	return err;
+}
+
+/**
+ * igb_setup_mrqc - configure the multiple receive queue control registers
+ * @adapter: Board private structure
+ **/
+static void igb_setup_mrqc(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 mrqc, rxcsum;
+	u32 j, num_rx_queues, shift = 0, shift2 = 0;
+	union e1000_reta {
+		u32 dword;
+		u8  bytes[4];
+	} reta;
+	static const u8 rsshash[40] = {
+		0x6d, 0x5a, 0x56, 0xda, 0x25, 0x5b, 0x0e, 0xc2, 0x41, 0x67,
+		0x25, 0x3d, 0x43, 0xa3, 0x8f, 0xb0, 0xd0, 0xca, 0x2b, 0xcb,
+		0xae, 0x7b, 0x30, 0xb4,	0x77, 0xcb, 0x2d, 0xa3, 0x80, 0x30,
+		0xf2, 0x0c, 0x6a, 0x42, 0xb7, 0x3b, 0xbe, 0xac, 0x01, 0xfa };
+
+	/* Fill out hash function seeds */
+	for (j = 0; j < 10; j++) {
+		u32 rsskey = rsshash[(j * 4)];
+		rsskey |= rsshash[(j * 4) + 1] << 8;
+		rsskey |= rsshash[(j * 4) + 2] << 16;
+		rsskey |= rsshash[(j * 4) + 3] << 24;
+		array_wr32(E1000_RSSRK(0), j, rsskey);
+	}
+
+	num_rx_queues = adapter->rss_queues;
+
+	if (adapter->vfs_allocated_count) {
+		/* 82575 and 82576 supports 2 RSS queues for VMDq */
+		switch (hw->mac.type) {
+		case e1000_i350:
+		case e1000_82580:
+			num_rx_queues = 1;
+			shift = 0;
+			break;
+		case e1000_82576:
+			shift = 3;
+			num_rx_queues = 2;
+			break;
+		case e1000_82575:
+			shift = 2;
+			shift2 = 6;
+		default:
+			break;
+		}
+	} else {
+		if (hw->mac.type == e1000_82575)
+			shift = 6;
+	}
+
+	for (j = 0; j < (32 * 4); j++) {
+		reta.bytes[j & 3] = (j % num_rx_queues) << shift;
+		if (shift2)
+			reta.bytes[j & 3] |= num_rx_queues << shift2;
+		if ((j & 3) == 3)
+			wr32(E1000_RETA(j >> 2), reta.dword);
+	}
+
+	/*
+	 * Disable raw packet checksumming so that RSS hash is placed in
+	 * descriptor on writeback.  No need to enable TCP/UDP/IP checksum
+	 * offloads as they are enabled by default
+	 */
+	rxcsum = rd32(E1000_RXCSUM);
+	rxcsum |= E1000_RXCSUM_PCSD;
+
+	if (adapter->hw.mac.type >= e1000_82576)
+		/* Enable Receive Checksum Offload for SCTP */
+		rxcsum |= E1000_RXCSUM_CRCOFL;
+
+	/* Don't need to set TUOFL or IPOFL, they default to 1 */
+	wr32(E1000_RXCSUM, rxcsum);
+
+	/* If VMDq is enabled then we set the appropriate mode for that, else
+	 * we default to RSS so that an RSS hash is calculated per packet even
+	 * if we are only using one queue */
+	if (adapter->vfs_allocated_count) {
+		if (hw->mac.type > e1000_82575) {
+			/* Set the default pool for the PF's first queue */
+			u32 vtctl = rd32(E1000_VT_CTL);
+			vtctl &= ~(E1000_VT_CTL_DEFAULT_POOL_MASK |
+				   E1000_VT_CTL_DISABLE_DEF_POOL);
+			vtctl |= adapter->vfs_allocated_count <<
+				E1000_VT_CTL_DEFAULT_POOL_SHIFT;
+			wr32(E1000_VT_CTL, vtctl);
+		}
+		if (adapter->rss_queues > 1)
+			mrqc = E1000_MRQC_ENABLE_VMDQ_RSS_2Q;
+		else
+			mrqc = E1000_MRQC_ENABLE_VMDQ;
+	} else {
+		mrqc = E1000_MRQC_ENABLE_RSS_4Q;
+	}
+	igb_vmm_control(adapter);
+
+	/*
+	 * Generate RSS hash based on TCP port numbers and/or
+	 * IPv4/v6 src and dst addresses since UDP cannot be
+	 * hashed reliably due to IP fragmentation
+	 */
+	mrqc |= E1000_MRQC_RSS_FIELD_IPV4 |
+		E1000_MRQC_RSS_FIELD_IPV4_TCP |
+		E1000_MRQC_RSS_FIELD_IPV6 |
+		E1000_MRQC_RSS_FIELD_IPV6_TCP |
+		E1000_MRQC_RSS_FIELD_IPV6_TCP_EX;
+
+	wr32(E1000_MRQC, mrqc);
+}
+
+/**
+ * igb_setup_rctl - configure the receive control registers
+ * @adapter: Board private structure
+ **/
+void igb_setup_rctl(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 rctl;
+
+	rctl = rd32(E1000_RCTL);
+
+	rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
+	rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC);
+
+	rctl |= E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_RDMTS_HALF |
+		(hw->mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
+
+	/*
+	 * enable stripping of CRC. It's unlikely this will break BMC
+	 * redirection as it did with e1000. Newer features require
+	 * that the HW strips the CRC.
+	 */
+	rctl |= E1000_RCTL_SECRC;
+
+	/* disable store bad packets and clear size bits. */
+	rctl &= ~(E1000_RCTL_SBP | E1000_RCTL_SZ_256);
+
+	/* enable LPE to prevent packets larger than max_frame_size */
+	rctl |= E1000_RCTL_LPE;
+
+	/* disable queue 0 to prevent tail write w/o re-config */
+	wr32(E1000_RXDCTL(0), 0);
+
+	/* Attention!!!  For SR-IOV PF driver operations you must enable
+	 * queue drop for all VF and PF queues to prevent head of line blocking
+	 * if an un-trusted VF does not provide descriptors to hardware.
+	 */
+	if (adapter->vfs_allocated_count) {
+		/* set all queue drop enable bits */
+		wr32(E1000_QDE, ALL_QUEUES);
+	}
+
+	wr32(E1000_RCTL, rctl);
+}
+
+static inline int igb_set_vf_rlpml(struct igb_adapter *adapter, int size,
+                                   int vfn)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 vmolr;
+
+	/* if it isn't the PF check to see if VFs are enabled and
+	 * increase the size to support vlan tags */
+	if (vfn < adapter->vfs_allocated_count &&
+	    adapter->vf_data[vfn].vlans_enabled)
+		size += VLAN_TAG_SIZE;
+
+	vmolr = rd32(E1000_VMOLR(vfn));
+	vmolr &= ~E1000_VMOLR_RLPML_MASK;
+	vmolr |= size | E1000_VMOLR_LPE;
+	wr32(E1000_VMOLR(vfn), vmolr);
+
+	return 0;
+}
+
+/**
+ * igb_rlpml_set - set maximum receive packet size
+ * @adapter: board private structure
+ *
+ * Configure maximum receivable packet size.
+ **/
+static void igb_rlpml_set(struct igb_adapter *adapter)
+{
+	u32 max_frame_size = adapter->max_frame_size;
+	struct e1000_hw *hw = &adapter->hw;
+	u16 pf_id = adapter->vfs_allocated_count;
+
+	if (pf_id) {
+		igb_set_vf_rlpml(adapter, max_frame_size, pf_id);
+		/*
+		 * If we're in VMDQ or SR-IOV mode, then set global RLPML
+		 * to our max jumbo frame size, in case we need to enable
+		 * jumbo frames on one of the rings later.
+		 * This will not pass over-length frames into the default
+		 * queue because it's gated by the VMOLR.RLPML.
+		 */
+		max_frame_size = MAX_JUMBO_FRAME_SIZE;
+	}
+
+	wr32(E1000_RLPML, max_frame_size);
+}
+
+static inline void igb_set_vmolr(struct igb_adapter *adapter,
+				 int vfn, bool aupe)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 vmolr;
+
+	/*
+	 * This register exists only on 82576 and newer so if we are older then
+	 * we should exit and do nothing
+	 */
+	if (hw->mac.type < e1000_82576)
+		return;
+
+	vmolr = rd32(E1000_VMOLR(vfn));
+	vmolr |= E1000_VMOLR_STRVLAN;      /* Strip vlan tags */
+	if (aupe)
+		vmolr |= E1000_VMOLR_AUPE;        /* Accept untagged packets */
+	else
+		vmolr &= ~(E1000_VMOLR_AUPE); /* Tagged packets ONLY */
+
+	/* clear all bits that might not be set */
+	vmolr &= ~(E1000_VMOLR_BAM | E1000_VMOLR_RSSE);
+
+	if (adapter->rss_queues > 1 && vfn == adapter->vfs_allocated_count)
+		vmolr |= E1000_VMOLR_RSSE; /* enable RSS */
+	/*
+	 * for VMDq only allow the VFs and pool 0 to accept broadcast and
+	 * multicast packets
+	 */
+	if (vfn <= adapter->vfs_allocated_count)
+		vmolr |= E1000_VMOLR_BAM;	   /* Accept broadcast */
+
+	wr32(E1000_VMOLR(vfn), vmolr);
+}
+
+/**
+ * igb_configure_rx_ring - Configure a receive ring after Reset
+ * @adapter: board private structure
+ * @ring: receive ring to be configured
+ *
+ * Configure the Rx unit of the MAC after a reset.
+ **/
+void igb_configure_rx_ring(struct igb_adapter *adapter,
+                           struct igb_ring *ring)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u64 rdba = ring->dma;
+	int reg_idx = ring->reg_idx;
+	u32 srrctl = 0, rxdctl = 0;
+
+	/* disable the queue */
+	wr32(E1000_RXDCTL(reg_idx), 0);
+
+	/* Set DMA base address registers */
+	wr32(E1000_RDBAL(reg_idx),
+	     rdba & 0x00000000ffffffffULL);
+	wr32(E1000_RDBAH(reg_idx), rdba >> 32);
+	wr32(E1000_RDLEN(reg_idx),
+	               ring->count * sizeof(union e1000_adv_rx_desc));
+
+	/* initialize head and tail */
+	ring->tail = hw->hw_addr + E1000_RDT(reg_idx);
+	wr32(E1000_RDH(reg_idx), 0);
+	writel(0, ring->tail);
+
+	/* set descriptor configuration */
+	srrctl = IGB_RX_HDR_LEN << E1000_SRRCTL_BSIZEHDRSIZE_SHIFT;
+#if (PAGE_SIZE / 2) > IGB_RXBUFFER_16384
+	srrctl |= IGB_RXBUFFER_16384 >> E1000_SRRCTL_BSIZEPKT_SHIFT;
+#else
+	srrctl |= (PAGE_SIZE / 2) >> E1000_SRRCTL_BSIZEPKT_SHIFT;
+#endif
+	srrctl |= E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS;
+	if (hw->mac.type >= e1000_82580)
+		srrctl |= E1000_SRRCTL_TIMESTAMP;
+	/* Only set Drop Enable if we are supporting multiple queues */
+	if (adapter->vfs_allocated_count || adapter->num_rx_queues > 1)
+		srrctl |= E1000_SRRCTL_DROP_EN;
+
+	wr32(E1000_SRRCTL(reg_idx), srrctl);
+
+	/* set filtering for VMDQ pools */
+	igb_set_vmolr(adapter, reg_idx & 0x7, true);
+
+	rxdctl |= IGB_RX_PTHRESH;
+	rxdctl |= IGB_RX_HTHRESH << 8;
+	rxdctl |= IGB_RX_WTHRESH << 16;
+
+	/* enable receive descriptor fetching */
+	rxdctl |= E1000_RXDCTL_QUEUE_ENABLE;
+	wr32(E1000_RXDCTL(reg_idx), rxdctl);
+}
+
+/**
+ * igb_configure_rx - Configure receive Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Rx unit of the MAC after a reset.
+ **/
+static void igb_configure_rx(struct igb_adapter *adapter)
+{
+	int i;
+
+	/* set UTA to appropriate mode */
+	igb_set_uta(adapter);
+
+	/* set the correct pool for the PF default MAC address in entry 0 */
+	igb_rar_set_qsel(adapter, adapter->hw.mac.addr, 0,
+	                 adapter->vfs_allocated_count);
+
+	/* Setup the HW Rx Head and Tail Descriptor Pointers and
+	 * the Base and Length of the Rx Descriptor Ring */
+	for (i = 0; i < adapter->num_rx_queues; i++)
+		igb_configure_rx_ring(adapter, adapter->rx_ring[i]);
+}
+
+/**
+ * igb_free_tx_resources - Free Tx Resources per Queue
+ * @tx_ring: Tx descriptor ring for a specific queue
+ *
+ * Free all transmit software resources
+ **/
+void igb_free_tx_resources(struct igb_ring *tx_ring)
+{
+	igb_clean_tx_ring(tx_ring);
+
+	vfree(tx_ring->tx_buffer_info);
+	tx_ring->tx_buffer_info = NULL;
+
+	/* if not set, then don't free */
+	if (!tx_ring->desc)
+		return;
+
+	dma_free_coherent(tx_ring->dev, tx_ring->size,
+			  tx_ring->desc, tx_ring->dma);
+
+	tx_ring->desc = NULL;
+}
+
+/**
+ * igb_free_all_tx_resources - Free Tx Resources for All Queues
+ * @adapter: board private structure
+ *
+ * Free all transmit software resources
+ **/
+static void igb_free_all_tx_resources(struct igb_adapter *adapter)
+{
+	int i;
+
+	for (i = 0; i < adapter->num_tx_queues; i++)
+		igb_free_tx_resources(adapter->tx_ring[i]);
+}
+
+void igb_unmap_and_free_tx_resource(struct igb_ring *ring,
+				    struct igb_tx_buffer *tx_buffer)
+{
+	if (tx_buffer->skb) {
+		dev_kfree_skb_any(tx_buffer->skb);
+		if (tx_buffer->dma)
+			dma_unmap_single(ring->dev,
+					 tx_buffer->dma,
+					 tx_buffer->length,
+					 DMA_TO_DEVICE);
+	} else if (tx_buffer->dma) {
+		dma_unmap_page(ring->dev,
+			       tx_buffer->dma,
+			       tx_buffer->length,
+			       DMA_TO_DEVICE);
+	}
+	tx_buffer->next_to_watch = NULL;
+	tx_buffer->skb = NULL;
+	tx_buffer->dma = 0;
+	/* buffer_info must be completely set up in the transmit path */
+}
+
+/**
+ * igb_clean_tx_ring - Free Tx Buffers
+ * @tx_ring: ring to be cleaned
+ **/
+static void igb_clean_tx_ring(struct igb_ring *tx_ring)
+{
+	struct igb_tx_buffer *buffer_info;
+	unsigned long size;
+	u16 i;
+
+	if (!tx_ring->tx_buffer_info)
+		return;
+	/* Free all the Tx ring sk_buffs */
+
+	for (i = 0; i < tx_ring->count; i++) {
+		buffer_info = &tx_ring->tx_buffer_info[i];
+		igb_unmap_and_free_tx_resource(tx_ring, buffer_info);
+	}
+
+	size = sizeof(struct igb_tx_buffer) * tx_ring->count;
+	memset(tx_ring->tx_buffer_info, 0, size);
+
+	/* Zero out the descriptor ring */
+	memset(tx_ring->desc, 0, tx_ring->size);
+
+	tx_ring->next_to_use = 0;
+	tx_ring->next_to_clean = 0;
+}
+
+/**
+ * igb_clean_all_tx_rings - Free Tx Buffers for all queues
+ * @adapter: board private structure
+ **/
+static void igb_clean_all_tx_rings(struct igb_adapter *adapter)
+{
+	int i;
+
+	for (i = 0; i < adapter->num_tx_queues; i++)
+		igb_clean_tx_ring(adapter->tx_ring[i]);
+}
+
+/**
+ * igb_free_rx_resources - Free Rx Resources
+ * @rx_ring: ring to clean the resources from
+ *
+ * Free all receive software resources
+ **/
+void igb_free_rx_resources(struct igb_ring *rx_ring)
+{
+	igb_clean_rx_ring(rx_ring);
+
+	vfree(rx_ring->rx_buffer_info);
+	rx_ring->rx_buffer_info = NULL;
+
+	/* if not set, then don't free */
+	if (!rx_ring->desc)
+		return;
+
+	dma_free_coherent(rx_ring->dev, rx_ring->size,
+			  rx_ring->desc, rx_ring->dma);
+
+	rx_ring->desc = NULL;
+}
+
+/**
+ * igb_free_all_rx_resources - Free Rx Resources for All Queues
+ * @adapter: board private structure
+ *
+ * Free all receive software resources
+ **/
+static void igb_free_all_rx_resources(struct igb_adapter *adapter)
+{
+	int i;
+
+	for (i = 0; i < adapter->num_rx_queues; i++)
+		igb_free_rx_resources(adapter->rx_ring[i]);
+}
+
+/**
+ * igb_clean_rx_ring - Free Rx Buffers per Queue
+ * @rx_ring: ring to free buffers from
+ **/
+static void igb_clean_rx_ring(struct igb_ring *rx_ring)
+{
+	unsigned long size;
+	u16 i;
+
+	if (!rx_ring->rx_buffer_info)
+		return;
+
+	/* Free all the Rx ring sk_buffs */
+	for (i = 0; i < rx_ring->count; i++) {
+		struct igb_rx_buffer *buffer_info = &rx_ring->rx_buffer_info[i];
+		if (buffer_info->dma) {
+			dma_unmap_single(rx_ring->dev,
+			                 buffer_info->dma,
+					 IGB_RX_HDR_LEN,
+					 DMA_FROM_DEVICE);
+			buffer_info->dma = 0;
+		}
+
+		if (buffer_info->skb) {
+			dev_kfree_skb(buffer_info->skb);
+			buffer_info->skb = NULL;
+		}
+		if (buffer_info->page_dma) {
+			dma_unmap_page(rx_ring->dev,
+			               buffer_info->page_dma,
+				       PAGE_SIZE / 2,
+				       DMA_FROM_DEVICE);
+			buffer_info->page_dma = 0;
+		}
+		if (buffer_info->page) {
+			put_page(buffer_info->page);
+			buffer_info->page = NULL;
+			buffer_info->page_offset = 0;
+		}
+	}
+
+	size = sizeof(struct igb_rx_buffer) * rx_ring->count;
+	memset(rx_ring->rx_buffer_info, 0, size);
+
+	/* Zero out the descriptor ring */
+	memset(rx_ring->desc, 0, rx_ring->size);
+
+	rx_ring->next_to_clean = 0;
+	rx_ring->next_to_use = 0;
+}
+
+/**
+ * igb_clean_all_rx_rings - Free Rx Buffers for all queues
+ * @adapter: board private structure
+ **/
+static void igb_clean_all_rx_rings(struct igb_adapter *adapter)
+{
+	int i;
+
+	for (i = 0; i < adapter->num_rx_queues; i++)
+		igb_clean_rx_ring(adapter->rx_ring[i]);
+}
+
+/**
+ * igb_set_mac - Change the Ethernet Address of the NIC
+ * @netdev: network interface device structure
+ * @p: pointer to an address structure
+ *
+ * Returns 0 on success, negative on failure
+ **/
+static int igb_set_mac(struct net_device *netdev, void *p)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	struct sockaddr *addr = p;
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+	memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len);
+
+	/* set the correct pool for the new PF MAC address in entry 0 */
+	igb_rar_set_qsel(adapter, hw->mac.addr, 0,
+	                 adapter->vfs_allocated_count);
+
+	return 0;
+}
+
+/**
+ * igb_write_mc_addr_list - write multicast addresses to MTA
+ * @netdev: network interface device structure
+ *
+ * Writes multicast address list to the MTA hash table.
+ * Returns: -ENOMEM on failure
+ *                0 on no addresses written
+ *                X on writing X addresses to MTA
+ **/
+static int igb_write_mc_addr_list(struct net_device *netdev)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	struct netdev_hw_addr *ha;
+	u8  *mta_list;
+	int i;
+
+	if (netdev_mc_empty(netdev)) {
+		/* nothing to program, so clear mc list */
+		igb_update_mc_addr_list(hw, NULL, 0);
+		igb_restore_vf_multicasts(adapter);
+		return 0;
+	}
+
+	mta_list = kzalloc(netdev_mc_count(netdev) * 6, GFP_ATOMIC);
+	if (!mta_list)
+		return -ENOMEM;
+
+	/* The shared function expects a packed array of only addresses. */
+	i = 0;
+	netdev_for_each_mc_addr(ha, netdev)
+		memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN);
+
+	igb_update_mc_addr_list(hw, mta_list, i);
+	kfree(mta_list);
+
+	return netdev_mc_count(netdev);
+}
+
+/**
+ * igb_write_uc_addr_list - write unicast addresses to RAR table
+ * @netdev: network interface device structure
+ *
+ * Writes unicast address list to the RAR table.
+ * Returns: -ENOMEM on failure/insufficient address space
+ *                0 on no addresses written
+ *                X on writing X addresses to the RAR table
+ **/
+static int igb_write_uc_addr_list(struct net_device *netdev)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	unsigned int vfn = adapter->vfs_allocated_count;
+	unsigned int rar_entries = hw->mac.rar_entry_count - (vfn + 1);
+	int count = 0;
+
+	/* return ENOMEM indicating insufficient memory for addresses */
+	if (netdev_uc_count(netdev) > rar_entries)
+		return -ENOMEM;
+
+	if (!netdev_uc_empty(netdev) && rar_entries) {
+		struct netdev_hw_addr *ha;
+
+		netdev_for_each_uc_addr(ha, netdev) {
+			if (!rar_entries)
+				break;
+			igb_rar_set_qsel(adapter, ha->addr,
+			                 rar_entries--,
+			                 vfn);
+			count++;
+		}
+	}
+	/* write the addresses in reverse order to avoid write combining */
+	for (; rar_entries > 0 ; rar_entries--) {
+		wr32(E1000_RAH(rar_entries), 0);
+		wr32(E1000_RAL(rar_entries), 0);
+	}
+	wrfl();
+
+	return count;
+}
+
+/**
+ * igb_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set
+ * @netdev: network interface device structure
+ *
+ * The set_rx_mode entry point is called whenever the unicast or multicast
+ * address lists or the network interface flags are updated.  This routine is
+ * responsible for configuring the hardware for proper unicast, multicast,
+ * promiscuous mode, and all-multi behavior.
+ **/
+static void igb_set_rx_mode(struct net_device *netdev)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	unsigned int vfn = adapter->vfs_allocated_count;
+	u32 rctl, vmolr = 0;
+	int count;
+
+	/* Check for Promiscuous and All Multicast modes */
+	rctl = rd32(E1000_RCTL);
+
+	/* clear the effected bits */
+	rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE | E1000_RCTL_VFE);
+
+	if (netdev->flags & IFF_PROMISC) {
+		rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
+		vmolr |= (E1000_VMOLR_ROPE | E1000_VMOLR_MPME);
+	} else {
+		if (netdev->flags & IFF_ALLMULTI) {
+			rctl |= E1000_RCTL_MPE;
+			vmolr |= E1000_VMOLR_MPME;
+		} else {
+			/*
+			 * Write addresses to the MTA, if the attempt fails
+			 * then we should just turn on promiscuous mode so
+			 * that we can at least receive multicast traffic
+			 */
+			count = igb_write_mc_addr_list(netdev);
+			if (count < 0) {
+				rctl |= E1000_RCTL_MPE;
+				vmolr |= E1000_VMOLR_MPME;
+			} else if (count) {
+				vmolr |= E1000_VMOLR_ROMPE;
+			}
+		}
+		/*
+		 * Write addresses to available RAR registers, if there is not
+		 * sufficient space to store all the addresses then enable
+		 * unicast promiscuous mode
+		 */
+		count = igb_write_uc_addr_list(netdev);
+		if (count < 0) {
+			rctl |= E1000_RCTL_UPE;
+			vmolr |= E1000_VMOLR_ROPE;
+		}
+		rctl |= E1000_RCTL_VFE;
+	}
+	wr32(E1000_RCTL, rctl);
+
+	/*
+	 * In order to support SR-IOV and eventually VMDq it is necessary to set
+	 * the VMOLR to enable the appropriate modes.  Without this workaround
+	 * we will have issues with VLAN tag stripping not being done for frames
+	 * that are only arriving because we are the default pool
+	 */
+	if (hw->mac.type < e1000_82576)
+		return;
+
+	vmolr |= rd32(E1000_VMOLR(vfn)) &
+	         ~(E1000_VMOLR_ROPE | E1000_VMOLR_MPME | E1000_VMOLR_ROMPE);
+	wr32(E1000_VMOLR(vfn), vmolr);
+	igb_restore_vf_multicasts(adapter);
+}
+
+static void igb_check_wvbr(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 wvbr = 0;
+
+	switch (hw->mac.type) {
+	case e1000_82576:
+	case e1000_i350:
+		if (!(wvbr = rd32(E1000_WVBR)))
+			return;
+		break;
+	default:
+		break;
+	}
+
+	adapter->wvbr |= wvbr;
+}
+
+#define IGB_STAGGERED_QUEUE_OFFSET 8
+
+static void igb_spoof_check(struct igb_adapter *adapter)
+{
+	int j;
+
+	if (!adapter->wvbr)
+		return;
+
+	for(j = 0; j < adapter->vfs_allocated_count; j++) {
+		if (adapter->wvbr & (1 << j) ||
+		    adapter->wvbr & (1 << (j + IGB_STAGGERED_QUEUE_OFFSET))) {
+			dev_warn(&adapter->pdev->dev,
+				"Spoof event(s) detected on VF %d\n", j);
+			adapter->wvbr &=
+				~((1 << j) |
+				  (1 << (j + IGB_STAGGERED_QUEUE_OFFSET)));
+		}
+	}
+}
+
+/* Need to wait a few seconds after link up to get diagnostic information from
+ * the phy */
+static void igb_update_phy_info(unsigned long data)
+{
+	struct igb_adapter *adapter = (struct igb_adapter *) data;
+	igb_get_phy_info(&adapter->hw);
+}
+
+/**
+ * igb_has_link - check shared code for link and determine up/down
+ * @adapter: pointer to driver private info
+ **/
+bool igb_has_link(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	bool link_active = false;
+	s32 ret_val = 0;
+
+	/* get_link_status is set on LSC (link status) interrupt or
+	 * rx sequence error interrupt.  get_link_status will stay
+	 * false until the e1000_check_for_link establishes link
+	 * for copper adapters ONLY
+	 */
+	switch (hw->phy.media_type) {
+	case e1000_media_type_copper:
+		if (hw->mac.get_link_status) {
+			ret_val = hw->mac.ops.check_for_link(hw);
+			link_active = !hw->mac.get_link_status;
+		} else {
+			link_active = true;
+		}
+		break;
+	case e1000_media_type_internal_serdes:
+		ret_val = hw->mac.ops.check_for_link(hw);
+		link_active = hw->mac.serdes_has_link;
+		break;
+	default:
+	case e1000_media_type_unknown:
+		break;
+	}
+
+	return link_active;
+}
+
+static bool igb_thermal_sensor_event(struct e1000_hw *hw, u32 event)
+{
+	bool ret = false;
+	u32 ctrl_ext, thstat;
+
+	/* check for thermal sensor event on i350, copper only */
+	if (hw->mac.type == e1000_i350) {
+		thstat = rd32(E1000_THSTAT);
+		ctrl_ext = rd32(E1000_CTRL_EXT);
+
+		if ((hw->phy.media_type == e1000_media_type_copper) &&
+		    !(ctrl_ext & E1000_CTRL_EXT_LINK_MODE_SGMII)) {
+			ret = !!(thstat & event);
+		}
+	}
+
+	return ret;
+}
+
+/**
+ * igb_watchdog - Timer Call-back
+ * @data: pointer to adapter cast into an unsigned long
+ **/
+static void igb_watchdog(unsigned long data)
+{
+	struct igb_adapter *adapter = (struct igb_adapter *)data;
+	/* Do the rest outside of interrupt context */
+	schedule_work(&adapter->watchdog_task);
+}
+
+static void igb_watchdog_task(struct work_struct *work)
+{
+	struct igb_adapter *adapter = container_of(work,
+	                                           struct igb_adapter,
+                                                   watchdog_task);
+	struct e1000_hw *hw = &adapter->hw;
+	struct net_device *netdev = adapter->netdev;
+	u32 link;
+	int i;
+
+	link = igb_has_link(adapter);
+	if (link) {
+		if (!netif_carrier_ok(netdev)) {
+			u32 ctrl;
+			hw->mac.ops.get_speed_and_duplex(hw,
+			                                 &adapter->link_speed,
+			                                 &adapter->link_duplex);
+
+			ctrl = rd32(E1000_CTRL);
+			/* Links status message must follow this format */
+			printk(KERN_INFO "igb: %s NIC Link is Up %d Mbps %s, "
+				 "Flow Control: %s\n",
+			       netdev->name,
+			       adapter->link_speed,
+			       adapter->link_duplex == FULL_DUPLEX ?
+				 "Full Duplex" : "Half Duplex",
+			       ((ctrl & E1000_CTRL_TFCE) &&
+			        (ctrl & E1000_CTRL_RFCE)) ? "RX/TX" :
+			       ((ctrl & E1000_CTRL_RFCE) ?  "RX" :
+			       ((ctrl & E1000_CTRL_TFCE) ?  "TX" : "None")));
+
+			/* check for thermal sensor event */
+			if (igb_thermal_sensor_event(hw, E1000_THSTAT_LINK_THROTTLE)) {
+				printk(KERN_INFO "igb: %s The network adapter "
+						 "link speed was downshifted "
+						 "because it overheated.\n",
+						 netdev->name);
+			}
+
+			/* adjust timeout factor according to speed/duplex */
+			adapter->tx_timeout_factor = 1;
+			switch (adapter->link_speed) {
+			case SPEED_10:
+				adapter->tx_timeout_factor = 14;
+				break;
+			case SPEED_100:
+				/* maybe add some timeout factor ? */
+				break;
+			}
+
+			netif_carrier_on(netdev);
+
+			igb_ping_all_vfs(adapter);
+			igb_check_vf_rate_limit(adapter);
+
+			/* link state has changed, schedule phy info update */
+			if (!test_bit(__IGB_DOWN, &adapter->state))
+				mod_timer(&adapter->phy_info_timer,
+					  round_jiffies(jiffies + 2 * HZ));
+		}
+	} else {
+		if (netif_carrier_ok(netdev)) {
+			adapter->link_speed = 0;
+			adapter->link_duplex = 0;
+
+			/* check for thermal sensor event */
+			if (igb_thermal_sensor_event(hw, E1000_THSTAT_PWR_DOWN)) {
+				printk(KERN_ERR "igb: %s The network adapter "
+						"was stopped because it "
+						"overheated.\n",
+						netdev->name);
+			}
+
+			/* Links status message must follow this format */
+			printk(KERN_INFO "igb: %s NIC Link is Down\n",
+			       netdev->name);
+			netif_carrier_off(netdev);
+
+			igb_ping_all_vfs(adapter);
+
+			/* link state has changed, schedule phy info update */
+			if (!test_bit(__IGB_DOWN, &adapter->state))
+				mod_timer(&adapter->phy_info_timer,
+					  round_jiffies(jiffies + 2 * HZ));
+		}
+	}
+
+	spin_lock(&adapter->stats64_lock);
+	igb_update_stats(adapter, &adapter->stats64);
+	spin_unlock(&adapter->stats64_lock);
+
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		struct igb_ring *tx_ring = adapter->tx_ring[i];
+		if (!netif_carrier_ok(netdev)) {
+			/* We've lost link, so the controller stops DMA,
+			 * but we've got queued Tx work that's never going
+			 * to get done, so reset controller to flush Tx.
+			 * (Do the reset outside of interrupt context). */
+			if (igb_desc_unused(tx_ring) + 1 < tx_ring->count) {
+				adapter->tx_timeout_count++;
+				schedule_work(&adapter->reset_task);
+				/* return immediately since reset is imminent */
+				return;
+			}
+		}
+
+		/* Force detection of hung controller every watchdog period */
+		set_bit(IGB_RING_FLAG_TX_DETECT_HANG, &tx_ring->flags);
+	}
+
+	/* Cause software interrupt to ensure rx ring is cleaned */
+	if (adapter->msix_entries) {
+		u32 eics = 0;
+		for (i = 0; i < adapter->num_q_vectors; i++)
+			eics |= adapter->q_vector[i]->eims_value;
+		wr32(E1000_EICS, eics);
+	} else {
+		wr32(E1000_ICS, E1000_ICS_RXDMT0);
+	}
+
+	igb_spoof_check(adapter);
+
+	/* Reset the timer */
+	if (!test_bit(__IGB_DOWN, &adapter->state))
+		mod_timer(&adapter->watchdog_timer,
+			  round_jiffies(jiffies + 2 * HZ));
+}
+
+enum latency_range {
+	lowest_latency = 0,
+	low_latency = 1,
+	bulk_latency = 2,
+	latency_invalid = 255
+};
+
+/**
+ * igb_update_ring_itr - update the dynamic ITR value based on packet size
+ *
+ *      Stores a new ITR value based on strictly on packet size.  This
+ *      algorithm is less sophisticated than that used in igb_update_itr,
+ *      due to the difficulty of synchronizing statistics across multiple
+ *      receive rings.  The divisors and thresholds used by this function
+ *      were determined based on theoretical maximum wire speed and testing
+ *      data, in order to minimize response time while increasing bulk
+ *      throughput.
+ *      This functionality is controlled by the InterruptThrottleRate module
+ *      parameter (see igb_param.c)
+ *      NOTE:  This function is called only when operating in a multiqueue
+ *             receive environment.
+ * @q_vector: pointer to q_vector
+ **/
+static void igb_update_ring_itr(struct igb_q_vector *q_vector)
+{
+	int new_val = q_vector->itr_val;
+	int avg_wire_size = 0;
+	struct igb_adapter *adapter = q_vector->adapter;
+	unsigned int packets;
+
+	/* For non-gigabit speeds, just fix the interrupt rate at 4000
+	 * ints/sec - ITR timer value of 120 ticks.
+	 */
+	if (adapter->link_speed != SPEED_1000) {
+		new_val = IGB_4K_ITR;
+		goto set_itr_val;
+	}
+
+	packets = q_vector->rx.total_packets;
+	if (packets)
+		avg_wire_size = q_vector->rx.total_bytes / packets;
+
+	packets = q_vector->tx.total_packets;
+	if (packets)
+		avg_wire_size = max_t(u32, avg_wire_size,
+				      q_vector->tx.total_bytes / packets);
+
+	/* if avg_wire_size isn't set no work was done */
+	if (!avg_wire_size)
+		goto clear_counts;
+
+	/* Add 24 bytes to size to account for CRC, preamble, and gap */
+	avg_wire_size += 24;
+
+	/* Don't starve jumbo frames */
+	avg_wire_size = min(avg_wire_size, 3000);
+
+	/* Give a little boost to mid-size frames */
+	if ((avg_wire_size > 300) && (avg_wire_size < 1200))
+		new_val = avg_wire_size / 3;
+	else
+		new_val = avg_wire_size / 2;
+
+	/* conservative mode (itr 3) eliminates the lowest_latency setting */
+	if (new_val < IGB_20K_ITR &&
+	    ((q_vector->rx.ring && adapter->rx_itr_setting == 3) ||
+	     (!q_vector->rx.ring && adapter->tx_itr_setting == 3)))
+		new_val = IGB_20K_ITR;
+
+set_itr_val:
+	if (new_val != q_vector->itr_val) {
+		q_vector->itr_val = new_val;
+		q_vector->set_itr = 1;
+	}
+clear_counts:
+	q_vector->rx.total_bytes = 0;
+	q_vector->rx.total_packets = 0;
+	q_vector->tx.total_bytes = 0;
+	q_vector->tx.total_packets = 0;
+}
+
+/**
+ * igb_update_itr - update the dynamic ITR value based on statistics
+ *      Stores a new ITR value based on packets and byte
+ *      counts during the last interrupt.  The advantage of per interrupt
+ *      computation is faster updates and more accurate ITR for the current
+ *      traffic pattern.  Constants in this function were computed
+ *      based on theoretical maximum wire speed and thresholds were set based
+ *      on testing data as well as attempting to minimize response time
+ *      while increasing bulk throughput.
+ *      this functionality is controlled by the InterruptThrottleRate module
+ *      parameter (see igb_param.c)
+ *      NOTE:  These calculations are only valid when operating in a single-
+ *             queue environment.
+ * @q_vector: pointer to q_vector
+ * @ring_container: ring info to update the itr for
+ **/
+static void igb_update_itr(struct igb_q_vector *q_vector,
+			   struct igb_ring_container *ring_container)
+{
+	unsigned int packets = ring_container->total_packets;
+	unsigned int bytes = ring_container->total_bytes;
+	u8 itrval = ring_container->itr;
+
+	/* no packets, exit with status unchanged */
+	if (packets == 0)
+		return;
+
+	switch (itrval) {
+	case lowest_latency:
+		/* handle TSO and jumbo frames */
+		if (bytes/packets > 8000)
+			itrval = bulk_latency;
+		else if ((packets < 5) && (bytes > 512))
+			itrval = low_latency;
+		break;
+	case low_latency:  /* 50 usec aka 20000 ints/s */
+		if (bytes > 10000) {
+			/* this if handles the TSO accounting */
+			if (bytes/packets > 8000) {
+				itrval = bulk_latency;
+			} else if ((packets < 10) || ((bytes/packets) > 1200)) {
+				itrval = bulk_latency;
+			} else if ((packets > 35)) {
+				itrval = lowest_latency;
+			}
+		} else if (bytes/packets > 2000) {
+			itrval = bulk_latency;
+		} else if (packets <= 2 && bytes < 512) {
+			itrval = lowest_latency;
+		}
+		break;
+	case bulk_latency: /* 250 usec aka 4000 ints/s */
+		if (bytes > 25000) {
+			if (packets > 35)
+				itrval = low_latency;
+		} else if (bytes < 1500) {
+			itrval = low_latency;
+		}
+		break;
+	}
+
+	/* clear work counters since we have the values we need */
+	ring_container->total_bytes = 0;
+	ring_container->total_packets = 0;
+
+	/* write updated itr to ring container */
+	ring_container->itr = itrval;
+}
+
+static void igb_set_itr(struct igb_q_vector *q_vector)
+{
+	struct igb_adapter *adapter = q_vector->adapter;
+	u32 new_itr = q_vector->itr_val;
+	u8 current_itr = 0;
+
+	/* for non-gigabit speeds, just fix the interrupt rate at 4000 */
+	if (adapter->link_speed != SPEED_1000) {
+		current_itr = 0;
+		new_itr = IGB_4K_ITR;
+		goto set_itr_now;
+	}
+
+	igb_update_itr(q_vector, &q_vector->tx);
+	igb_update_itr(q_vector, &q_vector->rx);
+
+	current_itr = max(q_vector->rx.itr, q_vector->tx.itr);
+
+	/* conservative mode (itr 3) eliminates the lowest_latency setting */
+	if (current_itr == lowest_latency &&
+	    ((q_vector->rx.ring && adapter->rx_itr_setting == 3) ||
+	     (!q_vector->rx.ring && adapter->tx_itr_setting == 3)))
+		current_itr = low_latency;
+
+	switch (current_itr) {
+	/* counts and packets in update_itr are dependent on these numbers */
+	case lowest_latency:
+		new_itr = IGB_70K_ITR; /* 70,000 ints/sec */
+		break;
+	case low_latency:
+		new_itr = IGB_20K_ITR; /* 20,000 ints/sec */
+		break;
+	case bulk_latency:
+		new_itr = IGB_4K_ITR;  /* 4,000 ints/sec */
+		break;
+	default:
+		break;
+	}
+
+set_itr_now:
+	if (new_itr != q_vector->itr_val) {
+		/* this attempts to bias the interrupt rate towards Bulk
+		 * by adding intermediate steps when interrupt rate is
+		 * increasing */
+		new_itr = new_itr > q_vector->itr_val ?
+		             max((new_itr * q_vector->itr_val) /
+		                 (new_itr + (q_vector->itr_val >> 2)),
+				 new_itr) :
+			     new_itr;
+		/* Don't write the value here; it resets the adapter's
+		 * internal timer, and causes us to delay far longer than
+		 * we should between interrupts.  Instead, we write the ITR
+		 * value at the beginning of the next interrupt so the timing
+		 * ends up being correct.
+		 */
+		q_vector->itr_val = new_itr;
+		q_vector->set_itr = 1;
+	}
+}
+
+void igb_tx_ctxtdesc(struct igb_ring *tx_ring, u32 vlan_macip_lens,
+		     u32 type_tucmd, u32 mss_l4len_idx)
+{
+	struct e1000_adv_tx_context_desc *context_desc;
+	u16 i = tx_ring->next_to_use;
+
+	context_desc = IGB_TX_CTXTDESC(tx_ring, i);
+
+	i++;
+	tx_ring->next_to_use = (i < tx_ring->count) ? i : 0;
+
+	/* set bits to identify this as an advanced context descriptor */
+	type_tucmd |= E1000_TXD_CMD_DEXT | E1000_ADVTXD_DTYP_CTXT;
+
+	/* For 82575, context index must be unique per ring. */
+	if (test_bit(IGB_RING_FLAG_TX_CTX_IDX, &tx_ring->flags))
+		mss_l4len_idx |= tx_ring->reg_idx << 4;
+
+	context_desc->vlan_macip_lens	= cpu_to_le32(vlan_macip_lens);
+	context_desc->seqnum_seed	= 0;
+	context_desc->type_tucmd_mlhl	= cpu_to_le32(type_tucmd);
+	context_desc->mss_l4len_idx	= cpu_to_le32(mss_l4len_idx);
+}
+
+static int igb_tso(struct igb_ring *tx_ring,
+		   struct igb_tx_buffer *first,
+		   u8 *hdr_len)
+{
+	struct sk_buff *skb = first->skb;
+	u32 vlan_macip_lens, type_tucmd;
+	u32 mss_l4len_idx, l4len;
+
+	if (!skb_is_gso(skb))
+		return 0;
+
+	if (skb_header_cloned(skb)) {
+		int err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
+		if (err)
+			return err;
+	}
+
+	/* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */
+	type_tucmd = E1000_ADVTXD_TUCMD_L4T_TCP;
+
+	if (first->protocol == __constant_htons(ETH_P_IP)) {
+		struct iphdr *iph = ip_hdr(skb);
+		iph->tot_len = 0;
+		iph->check = 0;
+		tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
+							 iph->daddr, 0,
+							 IPPROTO_TCP,
+							 0);
+		type_tucmd |= E1000_ADVTXD_TUCMD_IPV4;
+		first->tx_flags |= IGB_TX_FLAGS_TSO |
+				   IGB_TX_FLAGS_CSUM |
+				   IGB_TX_FLAGS_IPV4;
+	} else if (skb_is_gso_v6(skb)) {
+		ipv6_hdr(skb)->payload_len = 0;
+		tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
+						       &ipv6_hdr(skb)->daddr,
+						       0, IPPROTO_TCP, 0);
+		first->tx_flags |= IGB_TX_FLAGS_TSO |
+				   IGB_TX_FLAGS_CSUM;
+	}
+
+	/* compute header lengths */
+	l4len = tcp_hdrlen(skb);
+	*hdr_len = skb_transport_offset(skb) + l4len;
+
+	/* update gso size and bytecount with header size */
+	first->gso_segs = skb_shinfo(skb)->gso_segs;
+	first->bytecount += (first->gso_segs - 1) * *hdr_len;
+
+	/* MSS L4LEN IDX */
+	mss_l4len_idx = l4len << E1000_ADVTXD_L4LEN_SHIFT;
+	mss_l4len_idx |= skb_shinfo(skb)->gso_size << E1000_ADVTXD_MSS_SHIFT;
+
+	/* VLAN MACLEN IPLEN */
+	vlan_macip_lens = skb_network_header_len(skb);
+	vlan_macip_lens |= skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT;
+	vlan_macip_lens |= first->tx_flags & IGB_TX_FLAGS_VLAN_MASK;
+
+	igb_tx_ctxtdesc(tx_ring, vlan_macip_lens, type_tucmd, mss_l4len_idx);
+
+	return 1;
+}
+
+static void igb_tx_csum(struct igb_ring *tx_ring, struct igb_tx_buffer *first)
+{
+	struct sk_buff *skb = first->skb;
+	u32 vlan_macip_lens = 0;
+	u32 mss_l4len_idx = 0;
+	u32 type_tucmd = 0;
+
+	if (skb->ip_summed != CHECKSUM_PARTIAL) {
+		if (!(first->tx_flags & IGB_TX_FLAGS_VLAN))
+			return;
+	} else {
+		u8 l4_hdr = 0;
+		switch (first->protocol) {
+		case __constant_htons(ETH_P_IP):
+			vlan_macip_lens |= skb_network_header_len(skb);
+			type_tucmd |= E1000_ADVTXD_TUCMD_IPV4;
+			l4_hdr = ip_hdr(skb)->protocol;
+			break;
+		case __constant_htons(ETH_P_IPV6):
+			vlan_macip_lens |= skb_network_header_len(skb);
+			l4_hdr = ipv6_hdr(skb)->nexthdr;
+			break;
+		default:
+			if (unlikely(net_ratelimit())) {
+				dev_warn(tx_ring->dev,
+				 "partial checksum but proto=%x!\n",
+				 first->protocol);
+			}
+			break;
+		}
+
+		switch (l4_hdr) {
+		case IPPROTO_TCP:
+			type_tucmd |= E1000_ADVTXD_TUCMD_L4T_TCP;
+			mss_l4len_idx = tcp_hdrlen(skb) <<
+					E1000_ADVTXD_L4LEN_SHIFT;
+			break;
+		case IPPROTO_SCTP:
+			type_tucmd |= E1000_ADVTXD_TUCMD_L4T_SCTP;
+			mss_l4len_idx = sizeof(struct sctphdr) <<
+					E1000_ADVTXD_L4LEN_SHIFT;
+			break;
+		case IPPROTO_UDP:
+			mss_l4len_idx = sizeof(struct udphdr) <<
+					E1000_ADVTXD_L4LEN_SHIFT;
+			break;
+		default:
+			if (unlikely(net_ratelimit())) {
+				dev_warn(tx_ring->dev,
+				 "partial checksum but l4 proto=%x!\n",
+				 l4_hdr);
+			}
+			break;
+		}
+
+		/* update TX checksum flag */
+		first->tx_flags |= IGB_TX_FLAGS_CSUM;
+	}
+
+	vlan_macip_lens |= skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT;
+	vlan_macip_lens |= first->tx_flags & IGB_TX_FLAGS_VLAN_MASK;
+
+	igb_tx_ctxtdesc(tx_ring, vlan_macip_lens, type_tucmd, mss_l4len_idx);
+}
+
+static __le32 igb_tx_cmd_type(u32 tx_flags)
+{
+	/* set type for advanced descriptor with frame checksum insertion */
+	__le32 cmd_type = cpu_to_le32(E1000_ADVTXD_DTYP_DATA |
+				      E1000_ADVTXD_DCMD_IFCS |
+				      E1000_ADVTXD_DCMD_DEXT);
+
+	/* set HW vlan bit if vlan is present */
+	if (tx_flags & IGB_TX_FLAGS_VLAN)
+		cmd_type |= cpu_to_le32(E1000_ADVTXD_DCMD_VLE);
+
+	/* set timestamp bit if present */
+	if (tx_flags & IGB_TX_FLAGS_TSTAMP)
+		cmd_type |= cpu_to_le32(E1000_ADVTXD_MAC_TSTAMP);
+
+	/* set segmentation bits for TSO */
+	if (tx_flags & IGB_TX_FLAGS_TSO)
+		cmd_type |= cpu_to_le32(E1000_ADVTXD_DCMD_TSE);
+
+	return cmd_type;
+}
+
+static void igb_tx_olinfo_status(struct igb_ring *tx_ring,
+				 union e1000_adv_tx_desc *tx_desc,
+				 u32 tx_flags, unsigned int paylen)
+{
+	u32 olinfo_status = paylen << E1000_ADVTXD_PAYLEN_SHIFT;
+
+	/* 82575 requires a unique index per ring if any offload is enabled */
+	if ((tx_flags & (IGB_TX_FLAGS_CSUM | IGB_TX_FLAGS_VLAN)) &&
+	    test_bit(IGB_RING_FLAG_TX_CTX_IDX, &tx_ring->flags))
+		olinfo_status |= tx_ring->reg_idx << 4;
+
+	/* insert L4 checksum */
+	if (tx_flags & IGB_TX_FLAGS_CSUM) {
+		olinfo_status |= E1000_TXD_POPTS_TXSM << 8;
+
+		/* insert IPv4 checksum */
+		if (tx_flags & IGB_TX_FLAGS_IPV4)
+			olinfo_status |= E1000_TXD_POPTS_IXSM << 8;
+	}
+
+	tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status);
+}
+
+/*
+ * The largest size we can write to the descriptor is 65535.  In order to
+ * maintain a power of two alignment we have to limit ourselves to 32K.
+ */
+#define IGB_MAX_TXD_PWR	15
+#define IGB_MAX_DATA_PER_TXD	(1<<IGB_MAX_TXD_PWR)
+
+static void igb_tx_map(struct igb_ring *tx_ring,
+		       struct igb_tx_buffer *first,
+		       const u8 hdr_len)
+{
+	struct sk_buff *skb = first->skb;
+	struct igb_tx_buffer *tx_buffer_info;
+	union e1000_adv_tx_desc *tx_desc;
+	dma_addr_t dma;
+	struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[0];
+	unsigned int data_len = skb->data_len;
+	unsigned int size = skb_headlen(skb);
+	unsigned int paylen = skb->len - hdr_len;
+	__le32 cmd_type;
+	u32 tx_flags = first->tx_flags;
+	u16 i = tx_ring->next_to_use;
+
+	tx_desc = IGB_TX_DESC(tx_ring, i);
+
+	igb_tx_olinfo_status(tx_ring, tx_desc, tx_flags, paylen);
+	cmd_type = igb_tx_cmd_type(tx_flags);
+
+	dma = dma_map_single(tx_ring->dev, skb->data, size, DMA_TO_DEVICE);
+	if (dma_mapping_error(tx_ring->dev, dma))
+		goto dma_error;
+
+	/* record length, and DMA address */
+	first->length = size;
+	first->dma = dma;
+	tx_desc->read.buffer_addr = cpu_to_le64(dma);
+
+	for (;;) {
+		while (unlikely(size > IGB_MAX_DATA_PER_TXD)) {
+			tx_desc->read.cmd_type_len =
+				cmd_type | cpu_to_le32(IGB_MAX_DATA_PER_TXD);
+
+			i++;
+			tx_desc++;
+			if (i == tx_ring->count) {
+				tx_desc = IGB_TX_DESC(tx_ring, 0);
+				i = 0;
+			}
+
+			dma += IGB_MAX_DATA_PER_TXD;
+			size -= IGB_MAX_DATA_PER_TXD;
+
+			tx_desc->read.olinfo_status = 0;
+			tx_desc->read.buffer_addr = cpu_to_le64(dma);
+		}
+
+		if (likely(!data_len))
+			break;
+
+		tx_desc->read.cmd_type_len = cmd_type | cpu_to_le32(size);
+
+		i++;
+		tx_desc++;
+		if (i == tx_ring->count) {
+			tx_desc = IGB_TX_DESC(tx_ring, 0);
+			i = 0;
+		}
+
+		size = skb_frag_size(frag);
+		data_len -= size;
+
+		dma = skb_frag_dma_map(tx_ring->dev, frag, 0,
+				   size, DMA_TO_DEVICE);
+		if (dma_mapping_error(tx_ring->dev, dma))
+			goto dma_error;
+
+		tx_buffer_info = &tx_ring->tx_buffer_info[i];
+		tx_buffer_info->length = size;
+		tx_buffer_info->dma = dma;
+
+		tx_desc->read.olinfo_status = 0;
+		tx_desc->read.buffer_addr = cpu_to_le64(dma);
+
+		frag++;
+	}
+
+	/* write last descriptor with RS and EOP bits */
+	cmd_type |= cpu_to_le32(size) | cpu_to_le32(IGB_TXD_DCMD);
+	tx_desc->read.cmd_type_len = cmd_type;
+
+	/* set the timestamp */
+	first->time_stamp = jiffies;
+
+	/*
+	 * Force memory writes to complete before letting h/w know there
+	 * are new descriptors to fetch.  (Only applicable for weak-ordered
+	 * memory model archs, such as IA-64).
+	 *
+	 * We also need this memory barrier to make certain all of the
+	 * status bits have been updated before next_to_watch is written.
+	 */
+	wmb();
+
+	/* set next_to_watch value indicating a packet is present */
+	first->next_to_watch = tx_desc;
+
+	i++;
+	if (i == tx_ring->count)
+		i = 0;
+
+	tx_ring->next_to_use = i;
+
+	writel(i, tx_ring->tail);
+
+	/* we need this if more than one processor can write to our tail
+	 * at a time, it syncronizes IO on IA64/Altix systems */
+	mmiowb();
+
+	return;
+
+dma_error:
+	dev_err(tx_ring->dev, "TX DMA map failed\n");
+
+	/* clear dma mappings for failed tx_buffer_info map */
+	for (;;) {
+		tx_buffer_info = &tx_ring->tx_buffer_info[i];
+		igb_unmap_and_free_tx_resource(tx_ring, tx_buffer_info);
+		if (tx_buffer_info == first)
+			break;
+		if (i == 0)
+			i = tx_ring->count;
+		i--;
+	}
+
+	tx_ring->next_to_use = i;
+}
+
+static int __igb_maybe_stop_tx(struct igb_ring *tx_ring, const u16 size)
+{
+	struct net_device *netdev = tx_ring->netdev;
+
+	netif_stop_subqueue(netdev, tx_ring->queue_index);
+
+	/* Herbert's original patch had:
+	 *  smp_mb__after_netif_stop_queue();
+	 * but since that doesn't exist yet, just open code it. */
+	smp_mb();
+
+	/* We need to check again in a case another CPU has just
+	 * made room available. */
+	if (igb_desc_unused(tx_ring) < size)
+		return -EBUSY;
+
+	/* A reprieve! */
+	netif_wake_subqueue(netdev, tx_ring->queue_index);
+
+	u64_stats_update_begin(&tx_ring->tx_syncp2);
+	tx_ring->tx_stats.restart_queue2++;
+	u64_stats_update_end(&tx_ring->tx_syncp2);
+
+	return 0;
+}
+
+static inline int igb_maybe_stop_tx(struct igb_ring *tx_ring, const u16 size)
+{
+	if (igb_desc_unused(tx_ring) >= size)
+		return 0;
+	return __igb_maybe_stop_tx(tx_ring, size);
+}
+
+netdev_tx_t igb_xmit_frame_ring(struct sk_buff *skb,
+				struct igb_ring *tx_ring)
+{
+	struct igb_tx_buffer *first;
+	int tso;
+	u32 tx_flags = 0;
+	__be16 protocol = vlan_get_protocol(skb);
+	u8 hdr_len = 0;
+
+	/* need: 1 descriptor per page,
+	 *       + 2 desc gap to keep tail from touching head,
+	 *       + 1 desc for skb->data,
+	 *       + 1 desc for context descriptor,
+	 * otherwise try next time */
+	if (igb_maybe_stop_tx(tx_ring, skb_shinfo(skb)->nr_frags + 4)) {
+		/* this is a hard error */
+		return NETDEV_TX_BUSY;
+	}
+
+	/* record the location of the first descriptor for this packet */
+	first = &tx_ring->tx_buffer_info[tx_ring->next_to_use];
+	first->skb = skb;
+	first->bytecount = skb->len;
+	first->gso_segs = 1;
+
+	if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) {
+		skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
+		tx_flags |= IGB_TX_FLAGS_TSTAMP;
+	}
+
+	if (vlan_tx_tag_present(skb)) {
+		tx_flags |= IGB_TX_FLAGS_VLAN;
+		tx_flags |= (vlan_tx_tag_get(skb) << IGB_TX_FLAGS_VLAN_SHIFT);
+	}
+
+	/* record initial flags and protocol */
+	first->tx_flags = tx_flags;
+	first->protocol = protocol;
+
+	tso = igb_tso(tx_ring, first, &hdr_len);
+	if (tso < 0)
+		goto out_drop;
+	else if (!tso)
+		igb_tx_csum(tx_ring, first);
+
+	igb_tx_map(tx_ring, first, hdr_len);
+
+	/* Make sure there is space in the ring for the next send. */
+	igb_maybe_stop_tx(tx_ring, MAX_SKB_FRAGS + 4);
+
+	return NETDEV_TX_OK;
+
+out_drop:
+	igb_unmap_and_free_tx_resource(tx_ring, first);
+
+	return NETDEV_TX_OK;
+}
+
+static inline struct igb_ring *igb_tx_queue_mapping(struct igb_adapter *adapter,
+						    struct sk_buff *skb)
+{
+	unsigned int r_idx = skb->queue_mapping;
+
+	if (r_idx >= adapter->num_tx_queues)
+		r_idx = r_idx % adapter->num_tx_queues;
+
+	return adapter->tx_ring[r_idx];
+}
+
+static netdev_tx_t igb_xmit_frame(struct sk_buff *skb,
+				  struct net_device *netdev)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+
+	if (test_bit(__IGB_DOWN, &adapter->state)) {
+		dev_kfree_skb_any(skb);
+		return NETDEV_TX_OK;
+	}
+
+	if (skb->len <= 0) {
+		dev_kfree_skb_any(skb);
+		return NETDEV_TX_OK;
+	}
+
+	/*
+	 * The minimum packet size with TCTL.PSP set is 17 so pad the skb
+	 * in order to meet this minimum size requirement.
+	 */
+	if (skb->len < 17) {
+		if (skb_padto(skb, 17))
+			return NETDEV_TX_OK;
+		skb->len = 17;
+	}
+
+	return igb_xmit_frame_ring(skb, igb_tx_queue_mapping(adapter, skb));
+}
+
+/**
+ * igb_tx_timeout - Respond to a Tx Hang
+ * @netdev: network interface device structure
+ **/
+static void igb_tx_timeout(struct net_device *netdev)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+
+	/* Do the reset outside of interrupt context */
+	adapter->tx_timeout_count++;
+
+	if (hw->mac.type >= e1000_82580)
+		hw->dev_spec._82575.global_device_reset = true;
+
+	schedule_work(&adapter->reset_task);
+	wr32(E1000_EICS,
+	     (adapter->eims_enable_mask & ~adapter->eims_other));
+}
+
+static void igb_reset_task(struct work_struct *work)
+{
+	struct igb_adapter *adapter;
+	adapter = container_of(work, struct igb_adapter, reset_task);
+
+	igb_dump(adapter);
+	netdev_err(adapter->netdev, "Reset adapter\n");
+	igb_reinit_locked(adapter);
+}
+
+/**
+ * igb_get_stats64 - Get System Network Statistics
+ * @netdev: network interface device structure
+ * @stats: rtnl_link_stats64 pointer
+ *
+ **/
+static struct rtnl_link_stats64 *igb_get_stats64(struct net_device *netdev,
+						 struct rtnl_link_stats64 *stats)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+
+	spin_lock(&adapter->stats64_lock);
+	igb_update_stats(adapter, &adapter->stats64);
+	memcpy(stats, &adapter->stats64, sizeof(*stats));
+	spin_unlock(&adapter->stats64_lock);
+
+	return stats;
+}
+
+/**
+ * igb_change_mtu - Change the Maximum Transfer Unit
+ * @netdev: network interface device structure
+ * @new_mtu: new value for maximum frame size
+ *
+ * Returns 0 on success, negative on failure
+ **/
+static int igb_change_mtu(struct net_device *netdev, int new_mtu)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct pci_dev *pdev = adapter->pdev;
+	int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN;
+
+	if ((new_mtu < 68) || (max_frame > MAX_JUMBO_FRAME_SIZE)) {
+		dev_err(&pdev->dev, "Invalid MTU setting\n");
+		return -EINVAL;
+	}
+
+#define MAX_STD_JUMBO_FRAME_SIZE 9238
+	if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
+		dev_err(&pdev->dev, "MTU > 9216 not supported.\n");
+		return -EINVAL;
+	}
+
+	while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
+		msleep(1);
+
+	/* igb_down has a dependency on max_frame_size */
+	adapter->max_frame_size = max_frame;
+
+	if (netif_running(netdev))
+		igb_down(adapter);
+
+	dev_info(&pdev->dev, "changing MTU from %d to %d\n",
+		 netdev->mtu, new_mtu);
+	netdev->mtu = new_mtu;
+
+	if (netif_running(netdev))
+		igb_up(adapter);
+	else
+		igb_reset(adapter);
+
+	clear_bit(__IGB_RESETTING, &adapter->state);
+
+	return 0;
+}
+
+/**
+ * igb_update_stats - Update the board statistics counters
+ * @adapter: board private structure
+ **/
+
+void igb_update_stats(struct igb_adapter *adapter,
+		      struct rtnl_link_stats64 *net_stats)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	struct pci_dev *pdev = adapter->pdev;
+	u32 reg, mpc;
+	u16 phy_tmp;
+	int i;
+	u64 bytes, packets;
+	unsigned int start;
+	u64 _bytes, _packets;
+
+#define PHY_IDLE_ERROR_COUNT_MASK 0x00FF
+
+	/*
+	 * Prevent stats update while adapter is being reset, or if the pci
+	 * connection is down.
+	 */
+	if (adapter->link_speed == 0)
+		return;
+	if (pci_channel_offline(pdev))
+		return;
+
+	bytes = 0;
+	packets = 0;
+	for (i = 0; i < adapter->num_rx_queues; i++) {
+		u32 rqdpc_tmp = rd32(E1000_RQDPC(i)) & 0x0FFF;
+		struct igb_ring *ring = adapter->rx_ring[i];
+
+		ring->rx_stats.drops += rqdpc_tmp;
+		net_stats->rx_fifo_errors += rqdpc_tmp;
+
+		do {
+			start = u64_stats_fetch_begin_bh(&ring->rx_syncp);
+			_bytes = ring->rx_stats.bytes;
+			_packets = ring->rx_stats.packets;
+		} while (u64_stats_fetch_retry_bh(&ring->rx_syncp, start));
+		bytes += _bytes;
+		packets += _packets;
+	}
+
+	net_stats->rx_bytes = bytes;
+	net_stats->rx_packets = packets;
+
+	bytes = 0;
+	packets = 0;
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		struct igb_ring *ring = adapter->tx_ring[i];
+		do {
+			start = u64_stats_fetch_begin_bh(&ring->tx_syncp);
+			_bytes = ring->tx_stats.bytes;
+			_packets = ring->tx_stats.packets;
+		} while (u64_stats_fetch_retry_bh(&ring->tx_syncp, start));
+		bytes += _bytes;
+		packets += _packets;
+	}
+	net_stats->tx_bytes = bytes;
+	net_stats->tx_packets = packets;
+
+	/* read stats registers */
+	adapter->stats.crcerrs += rd32(E1000_CRCERRS);
+	adapter->stats.gprc += rd32(E1000_GPRC);
+	adapter->stats.gorc += rd32(E1000_GORCL);
+	rd32(E1000_GORCH); /* clear GORCL */
+	adapter->stats.bprc += rd32(E1000_BPRC);
+	adapter->stats.mprc += rd32(E1000_MPRC);
+	adapter->stats.roc += rd32(E1000_ROC);
+
+	adapter->stats.prc64 += rd32(E1000_PRC64);
+	adapter->stats.prc127 += rd32(E1000_PRC127);
+	adapter->stats.prc255 += rd32(E1000_PRC255);
+	adapter->stats.prc511 += rd32(E1000_PRC511);
+	adapter->stats.prc1023 += rd32(E1000_PRC1023);
+	adapter->stats.prc1522 += rd32(E1000_PRC1522);
+	adapter->stats.symerrs += rd32(E1000_SYMERRS);
+	adapter->stats.sec += rd32(E1000_SEC);
+
+	mpc = rd32(E1000_MPC);
+	adapter->stats.mpc += mpc;
+	net_stats->rx_fifo_errors += mpc;
+	adapter->stats.scc += rd32(E1000_SCC);
+	adapter->stats.ecol += rd32(E1000_ECOL);
+	adapter->stats.mcc += rd32(E1000_MCC);
+	adapter->stats.latecol += rd32(E1000_LATECOL);
+	adapter->stats.dc += rd32(E1000_DC);
+	adapter->stats.rlec += rd32(E1000_RLEC);
+	adapter->stats.xonrxc += rd32(E1000_XONRXC);
+	adapter->stats.xontxc += rd32(E1000_XONTXC);
+	adapter->stats.xoffrxc += rd32(E1000_XOFFRXC);
+	adapter->stats.xofftxc += rd32(E1000_XOFFTXC);
+	adapter->stats.fcruc += rd32(E1000_FCRUC);
+	adapter->stats.gptc += rd32(E1000_GPTC);
+	adapter->stats.gotc += rd32(E1000_GOTCL);
+	rd32(E1000_GOTCH); /* clear GOTCL */
+	adapter->stats.rnbc += rd32(E1000_RNBC);
+	adapter->stats.ruc += rd32(E1000_RUC);
+	adapter->stats.rfc += rd32(E1000_RFC);
+	adapter->stats.rjc += rd32(E1000_RJC);
+	adapter->stats.tor += rd32(E1000_TORH);
+	adapter->stats.tot += rd32(E1000_TOTH);
+	adapter->stats.tpr += rd32(E1000_TPR);
+
+	adapter->stats.ptc64 += rd32(E1000_PTC64);
+	adapter->stats.ptc127 += rd32(E1000_PTC127);
+	adapter->stats.ptc255 += rd32(E1000_PTC255);
+	adapter->stats.ptc511 += rd32(E1000_PTC511);
+	adapter->stats.ptc1023 += rd32(E1000_PTC1023);
+	adapter->stats.ptc1522 += rd32(E1000_PTC1522);
+
+	adapter->stats.mptc += rd32(E1000_MPTC);
+	adapter->stats.bptc += rd32(E1000_BPTC);
+
+	adapter->stats.tpt += rd32(E1000_TPT);
+	adapter->stats.colc += rd32(E1000_COLC);
+
+	adapter->stats.algnerrc += rd32(E1000_ALGNERRC);
+	/* read internal phy specific stats */
+	reg = rd32(E1000_CTRL_EXT);
+	if (!(reg & E1000_CTRL_EXT_LINK_MODE_MASK)) {
+		adapter->stats.rxerrc += rd32(E1000_RXERRC);
+		adapter->stats.tncrs += rd32(E1000_TNCRS);
+	}
+
+	adapter->stats.tsctc += rd32(E1000_TSCTC);
+	adapter->stats.tsctfc += rd32(E1000_TSCTFC);
+
+	adapter->stats.iac += rd32(E1000_IAC);
+	adapter->stats.icrxoc += rd32(E1000_ICRXOC);
+	adapter->stats.icrxptc += rd32(E1000_ICRXPTC);
+	adapter->stats.icrxatc += rd32(E1000_ICRXATC);
+	adapter->stats.ictxptc += rd32(E1000_ICTXPTC);
+	adapter->stats.ictxatc += rd32(E1000_ICTXATC);
+	adapter->stats.ictxqec += rd32(E1000_ICTXQEC);
+	adapter->stats.ictxqmtc += rd32(E1000_ICTXQMTC);
+	adapter->stats.icrxdmtc += rd32(E1000_ICRXDMTC);
+
+	/* Fill out the OS statistics structure */
+	net_stats->multicast = adapter->stats.mprc;
+	net_stats->collisions = adapter->stats.colc;
+
+	/* Rx Errors */
+
+	/* RLEC on some newer hardware can be incorrect so build
+	 * our own version based on RUC and ROC */
+	net_stats->rx_errors = adapter->stats.rxerrc +
+		adapter->stats.crcerrs + adapter->stats.algnerrc +
+		adapter->stats.ruc + adapter->stats.roc +
+		adapter->stats.cexterr;
+	net_stats->rx_length_errors = adapter->stats.ruc +
+				      adapter->stats.roc;
+	net_stats->rx_crc_errors = adapter->stats.crcerrs;
+	net_stats->rx_frame_errors = adapter->stats.algnerrc;
+	net_stats->rx_missed_errors = adapter->stats.mpc;
+
+	/* Tx Errors */
+	net_stats->tx_errors = adapter->stats.ecol +
+			       adapter->stats.latecol;
+	net_stats->tx_aborted_errors = adapter->stats.ecol;
+	net_stats->tx_window_errors = adapter->stats.latecol;
+	net_stats->tx_carrier_errors = adapter->stats.tncrs;
+
+	/* Tx Dropped needs to be maintained elsewhere */
+
+	/* Phy Stats */
+	if (hw->phy.media_type == e1000_media_type_copper) {
+		if ((adapter->link_speed == SPEED_1000) &&
+		   (!igb_read_phy_reg(hw, PHY_1000T_STATUS, &phy_tmp))) {
+			phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK;
+			adapter->phy_stats.idle_errors += phy_tmp;
+		}
+	}
+
+	/* Management Stats */
+	adapter->stats.mgptc += rd32(E1000_MGTPTC);
+	adapter->stats.mgprc += rd32(E1000_MGTPRC);
+	adapter->stats.mgpdc += rd32(E1000_MGTPDC);
+
+	/* OS2BMC Stats */
+	reg = rd32(E1000_MANC);
+	if (reg & E1000_MANC_EN_BMC2OS) {
+		adapter->stats.o2bgptc += rd32(E1000_O2BGPTC);
+		adapter->stats.o2bspc += rd32(E1000_O2BSPC);
+		adapter->stats.b2ospc += rd32(E1000_B2OSPC);
+		adapter->stats.b2ogprc += rd32(E1000_B2OGPRC);
+	}
+}
+
+static irqreturn_t igb_msix_other(int irq, void *data)
+{
+	struct igb_adapter *adapter = data;
+	struct e1000_hw *hw = &adapter->hw;
+	u32 icr = rd32(E1000_ICR);
+	/* reading ICR causes bit 31 of EICR to be cleared */
+
+	if (icr & E1000_ICR_DRSTA)
+		schedule_work(&adapter->reset_task);
+
+	if (icr & E1000_ICR_DOUTSYNC) {
+		/* HW is reporting DMA is out of sync */
+		adapter->stats.doosync++;
+		/* The DMA Out of Sync is also indication of a spoof event
+		 * in IOV mode. Check the Wrong VM Behavior register to
+		 * see if it is really a spoof event. */
+		igb_check_wvbr(adapter);
+	}
+
+	/* Check for a mailbox event */
+	if (icr & E1000_ICR_VMMB)
+		igb_msg_task(adapter);
+
+	if (icr & E1000_ICR_LSC) {
+		hw->mac.get_link_status = 1;
+		/* guard against interrupt when we're going down */
+		if (!test_bit(__IGB_DOWN, &adapter->state))
+			mod_timer(&adapter->watchdog_timer, jiffies + 1);
+	}
+
+	wr32(E1000_EIMS, adapter->eims_other);
+
+	return IRQ_HANDLED;
+}
+
+static void igb_write_itr(struct igb_q_vector *q_vector)
+{
+	struct igb_adapter *adapter = q_vector->adapter;
+	u32 itr_val = q_vector->itr_val & 0x7FFC;
+
+	if (!q_vector->set_itr)
+		return;
+
+	if (!itr_val)
+		itr_val = 0x4;
+
+	if (adapter->hw.mac.type == e1000_82575)
+		itr_val |= itr_val << 16;
+	else
+		itr_val |= E1000_EITR_CNT_IGNR;
+
+	writel(itr_val, q_vector->itr_register);
+	q_vector->set_itr = 0;
+}
+
+static irqreturn_t igb_msix_ring(int irq, void *data)
+{
+	struct igb_q_vector *q_vector = data;
+
+	/* Write the ITR value calculated from the previous interrupt. */
+	igb_write_itr(q_vector);
+
+	napi_schedule(&q_vector->napi);
+
+	return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_IGB_DCA
+static void igb_update_dca(struct igb_q_vector *q_vector)
+{
+	struct igb_adapter *adapter = q_vector->adapter;
+	struct e1000_hw *hw = &adapter->hw;
+	int cpu = get_cpu();
+
+	if (q_vector->cpu == cpu)
+		goto out_no_update;
+
+	if (q_vector->tx.ring) {
+		int q = q_vector->tx.ring->reg_idx;
+		u32 dca_txctrl = rd32(E1000_DCA_TXCTRL(q));
+		if (hw->mac.type == e1000_82575) {
+			dca_txctrl &= ~E1000_DCA_TXCTRL_CPUID_MASK;
+			dca_txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
+		} else {
+			dca_txctrl &= ~E1000_DCA_TXCTRL_CPUID_MASK_82576;
+			dca_txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu) <<
+			              E1000_DCA_TXCTRL_CPUID_SHIFT;
+		}
+		dca_txctrl |= E1000_DCA_TXCTRL_DESC_DCA_EN;
+		wr32(E1000_DCA_TXCTRL(q), dca_txctrl);
+	}
+	if (q_vector->rx.ring) {
+		int q = q_vector->rx.ring->reg_idx;
+		u32 dca_rxctrl = rd32(E1000_DCA_RXCTRL(q));
+		if (hw->mac.type == e1000_82575) {
+			dca_rxctrl &= ~E1000_DCA_RXCTRL_CPUID_MASK;
+			dca_rxctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
+		} else {
+			dca_rxctrl &= ~E1000_DCA_RXCTRL_CPUID_MASK_82576;
+			dca_rxctrl |= dca3_get_tag(&adapter->pdev->dev, cpu) <<
+			              E1000_DCA_RXCTRL_CPUID_SHIFT;
+		}
+		dca_rxctrl |= E1000_DCA_RXCTRL_DESC_DCA_EN;
+		dca_rxctrl |= E1000_DCA_RXCTRL_HEAD_DCA_EN;
+		dca_rxctrl |= E1000_DCA_RXCTRL_DATA_DCA_EN;
+		wr32(E1000_DCA_RXCTRL(q), dca_rxctrl);
+	}
+	q_vector->cpu = cpu;
+out_no_update:
+	put_cpu();
+}
+
+static void igb_setup_dca(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	int i;
+
+	if (!(adapter->flags & IGB_FLAG_DCA_ENABLED))
+		return;
+
+	/* Always use CB2 mode, difference is masked in the CB driver. */
+	wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_CB2);
+
+	for (i = 0; i < adapter->num_q_vectors; i++) {
+		adapter->q_vector[i]->cpu = -1;
+		igb_update_dca(adapter->q_vector[i]);
+	}
+}
+
+static int __igb_notify_dca(struct device *dev, void *data)
+{
+	struct net_device *netdev = dev_get_drvdata(dev);
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct pci_dev *pdev = adapter->pdev;
+	struct e1000_hw *hw = &adapter->hw;
+	unsigned long event = *(unsigned long *)data;
+
+	switch (event) {
+	case DCA_PROVIDER_ADD:
+		/* if already enabled, don't do it again */
+		if (adapter->flags & IGB_FLAG_DCA_ENABLED)
+			break;
+		if (dca_add_requester(dev) == 0) {
+			adapter->flags |= IGB_FLAG_DCA_ENABLED;
+			dev_info(&pdev->dev, "DCA enabled\n");
+			igb_setup_dca(adapter);
+			break;
+		}
+		/* Fall Through since DCA is disabled. */
+	case DCA_PROVIDER_REMOVE:
+		if (adapter->flags & IGB_FLAG_DCA_ENABLED) {
+			/* without this a class_device is left
+			 * hanging around in the sysfs model */
+			dca_remove_requester(dev);
+			dev_info(&pdev->dev, "DCA disabled\n");
+			adapter->flags &= ~IGB_FLAG_DCA_ENABLED;
+			wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_DISABLE);
+		}
+		break;
+	}
+
+	return 0;
+}
+
+static int igb_notify_dca(struct notifier_block *nb, unsigned long event,
+                          void *p)
+{
+	int ret_val;
+
+	ret_val = driver_for_each_device(&igb_driver.driver, NULL, &event,
+	                                 __igb_notify_dca);
+
+	return ret_val ? NOTIFY_BAD : NOTIFY_DONE;
+}
+#endif /* CONFIG_IGB_DCA */
+
+#ifdef CONFIG_PCI_IOV
+static int igb_vf_configure(struct igb_adapter *adapter, int vf)
+{
+	unsigned char mac_addr[ETH_ALEN];
+	struct pci_dev *pdev = adapter->pdev;
+	struct e1000_hw *hw = &adapter->hw;
+	struct pci_dev *pvfdev;
+	unsigned int device_id;
+	u16 thisvf_devfn;
+
+	random_ether_addr(mac_addr);
+	igb_set_vf_mac(adapter, vf, mac_addr);
+
+	switch (adapter->hw.mac.type) {
+	case e1000_82576:
+		device_id = IGB_82576_VF_DEV_ID;
+		/* VF Stride for 82576 is 2 */
+		thisvf_devfn = (pdev->devfn + 0x80 + (vf << 1)) |
+			(pdev->devfn & 1);
+		break;
+	case e1000_i350:
+		device_id = IGB_I350_VF_DEV_ID;
+		/* VF Stride for I350 is 4 */
+		thisvf_devfn = (pdev->devfn + 0x80 + (vf << 2)) |
+				(pdev->devfn & 3);
+		break;
+	default:
+		device_id = 0;
+		thisvf_devfn = 0;
+		break;
+	}
+
+	pvfdev = pci_get_device(hw->vendor_id, device_id, NULL);
+	while (pvfdev) {
+		if (pvfdev->devfn == thisvf_devfn)
+			break;
+		pvfdev = pci_get_device(hw->vendor_id,
+					device_id, pvfdev);
+	}
+
+	if (pvfdev)
+		adapter->vf_data[vf].vfdev = pvfdev;
+	else
+		dev_err(&pdev->dev,
+			"Couldn't find pci dev ptr for VF %4.4x\n",
+			thisvf_devfn);
+	return pvfdev != NULL;
+}
+
+static int igb_find_enabled_vfs(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	struct pci_dev *pdev = adapter->pdev;
+	struct pci_dev *pvfdev;
+	u16 vf_devfn = 0;
+	u16 vf_stride;
+	unsigned int device_id;
+	int vfs_found = 0;
+
+	switch (adapter->hw.mac.type) {
+	case e1000_82576:
+		device_id = IGB_82576_VF_DEV_ID;
+		/* VF Stride for 82576 is 2 */
+		vf_stride = 2;
+		break;
+	case e1000_i350:
+		device_id = IGB_I350_VF_DEV_ID;
+		/* VF Stride for I350 is 4 */
+		vf_stride = 4;
+		break;
+	default:
+		device_id = 0;
+		vf_stride = 0;
+		break;
+	}
+
+	vf_devfn = pdev->devfn + 0x80;
+	pvfdev = pci_get_device(hw->vendor_id, device_id, NULL);
+	while (pvfdev) {
+		if (pvfdev->devfn == vf_devfn)
+			vfs_found++;
+		vf_devfn += vf_stride;
+		pvfdev = pci_get_device(hw->vendor_id,
+					device_id, pvfdev);
+	}
+
+	return vfs_found;
+}
+
+static int igb_check_vf_assignment(struct igb_adapter *adapter)
+{
+	int i;
+	for (i = 0; i < adapter->vfs_allocated_count; i++) {
+		if (adapter->vf_data[i].vfdev) {
+			if (adapter->vf_data[i].vfdev->dev_flags &
+			    PCI_DEV_FLAGS_ASSIGNED)
+				return true;
+		}
+	}
+	return false;
+}
+
+#endif
+static void igb_ping_all_vfs(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 ping;
+	int i;
+
+	for (i = 0 ; i < adapter->vfs_allocated_count; i++) {
+		ping = E1000_PF_CONTROL_MSG;
+		if (adapter->vf_data[i].flags & IGB_VF_FLAG_CTS)
+			ping |= E1000_VT_MSGTYPE_CTS;
+		igb_write_mbx(hw, &ping, 1, i);
+	}
+}
+
+static int igb_set_vf_promisc(struct igb_adapter *adapter, u32 *msgbuf, u32 vf)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 vmolr = rd32(E1000_VMOLR(vf));
+	struct vf_data_storage *vf_data = &adapter->vf_data[vf];
+
+	vf_data->flags &= ~(IGB_VF_FLAG_UNI_PROMISC |
+	                    IGB_VF_FLAG_MULTI_PROMISC);
+	vmolr &= ~(E1000_VMOLR_ROPE | E1000_VMOLR_ROMPE | E1000_VMOLR_MPME);
+
+	if (*msgbuf & E1000_VF_SET_PROMISC_MULTICAST) {
+		vmolr |= E1000_VMOLR_MPME;
+		vf_data->flags |= IGB_VF_FLAG_MULTI_PROMISC;
+		*msgbuf &= ~E1000_VF_SET_PROMISC_MULTICAST;
+	} else {
+		/*
+		 * if we have hashes and we are clearing a multicast promisc
+		 * flag we need to write the hashes to the MTA as this step
+		 * was previously skipped
+		 */
+		if (vf_data->num_vf_mc_hashes > 30) {
+			vmolr |= E1000_VMOLR_MPME;
+		} else if (vf_data->num_vf_mc_hashes) {
+			int j;
+			vmolr |= E1000_VMOLR_ROMPE;
+			for (j = 0; j < vf_data->num_vf_mc_hashes; j++)
+				igb_mta_set(hw, vf_data->vf_mc_hashes[j]);
+		}
+	}
+
+	wr32(E1000_VMOLR(vf), vmolr);
+
+	/* there are flags left unprocessed, likely not supported */
+	if (*msgbuf & E1000_VT_MSGINFO_MASK)
+		return -EINVAL;
+
+	return 0;
+
+}
+
+static int igb_set_vf_multicasts(struct igb_adapter *adapter,
+				  u32 *msgbuf, u32 vf)
+{
+	int n = (msgbuf[0] & E1000_VT_MSGINFO_MASK) >> E1000_VT_MSGINFO_SHIFT;
+	u16 *hash_list = (u16 *)&msgbuf[1];
+	struct vf_data_storage *vf_data = &adapter->vf_data[vf];
+	int i;
+
+	/* salt away the number of multicast addresses assigned
+	 * to this VF for later use to restore when the PF multi cast
+	 * list changes
+	 */
+	vf_data->num_vf_mc_hashes = n;
+
+	/* only up to 30 hash values supported */
+	if (n > 30)
+		n = 30;
+
+	/* store the hashes for later use */
+	for (i = 0; i < n; i++)
+		vf_data->vf_mc_hashes[i] = hash_list[i];
+
+	/* Flush and reset the mta with the new values */
+	igb_set_rx_mode(adapter->netdev);
+
+	return 0;
+}
+
+static void igb_restore_vf_multicasts(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	struct vf_data_storage *vf_data;
+	int i, j;
+
+	for (i = 0; i < adapter->vfs_allocated_count; i++) {
+		u32 vmolr = rd32(E1000_VMOLR(i));
+		vmolr &= ~(E1000_VMOLR_ROMPE | E1000_VMOLR_MPME);
+
+		vf_data = &adapter->vf_data[i];
+
+		if ((vf_data->num_vf_mc_hashes > 30) ||
+		    (vf_data->flags & IGB_VF_FLAG_MULTI_PROMISC)) {
+			vmolr |= E1000_VMOLR_MPME;
+		} else if (vf_data->num_vf_mc_hashes) {
+			vmolr |= E1000_VMOLR_ROMPE;
+			for (j = 0; j < vf_data->num_vf_mc_hashes; j++)
+				igb_mta_set(hw, vf_data->vf_mc_hashes[j]);
+		}
+		wr32(E1000_VMOLR(i), vmolr);
+	}
+}
+
+static void igb_clear_vf_vfta(struct igb_adapter *adapter, u32 vf)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 pool_mask, reg, vid;
+	int i;
+
+	pool_mask = 1 << (E1000_VLVF_POOLSEL_SHIFT + vf);
+
+	/* Find the vlan filter for this id */
+	for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) {
+		reg = rd32(E1000_VLVF(i));
+
+		/* remove the vf from the pool */
+		reg &= ~pool_mask;
+
+		/* if pool is empty then remove entry from vfta */
+		if (!(reg & E1000_VLVF_POOLSEL_MASK) &&
+		    (reg & E1000_VLVF_VLANID_ENABLE)) {
+			reg = 0;
+			vid = reg & E1000_VLVF_VLANID_MASK;
+			igb_vfta_set(hw, vid, false);
+		}
+
+		wr32(E1000_VLVF(i), reg);
+	}
+
+	adapter->vf_data[vf].vlans_enabled = 0;
+}
+
+static s32 igb_vlvf_set(struct igb_adapter *adapter, u32 vid, bool add, u32 vf)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 reg, i;
+
+	/* The vlvf table only exists on 82576 hardware and newer */
+	if (hw->mac.type < e1000_82576)
+		return -1;
+
+	/* we only need to do this if VMDq is enabled */
+	if (!adapter->vfs_allocated_count)
+		return -1;
+
+	/* Find the vlan filter for this id */
+	for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) {
+		reg = rd32(E1000_VLVF(i));
+		if ((reg & E1000_VLVF_VLANID_ENABLE) &&
+		    vid == (reg & E1000_VLVF_VLANID_MASK))
+			break;
+	}
+
+	if (add) {
+		if (i == E1000_VLVF_ARRAY_SIZE) {
+			/* Did not find a matching VLAN ID entry that was
+			 * enabled.  Search for a free filter entry, i.e.
+			 * one without the enable bit set
+			 */
+			for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) {
+				reg = rd32(E1000_VLVF(i));
+				if (!(reg & E1000_VLVF_VLANID_ENABLE))
+					break;
+			}
+		}
+		if (i < E1000_VLVF_ARRAY_SIZE) {
+			/* Found an enabled/available entry */
+			reg |= 1 << (E1000_VLVF_POOLSEL_SHIFT + vf);
+
+			/* if !enabled we need to set this up in vfta */
+			if (!(reg & E1000_VLVF_VLANID_ENABLE)) {
+				/* add VID to filter table */
+				igb_vfta_set(hw, vid, true);
+				reg |= E1000_VLVF_VLANID_ENABLE;
+			}
+			reg &= ~E1000_VLVF_VLANID_MASK;
+			reg |= vid;
+			wr32(E1000_VLVF(i), reg);
+
+			/* do not modify RLPML for PF devices */
+			if (vf >= adapter->vfs_allocated_count)
+				return 0;
+
+			if (!adapter->vf_data[vf].vlans_enabled) {
+				u32 size;
+				reg = rd32(E1000_VMOLR(vf));
+				size = reg & E1000_VMOLR_RLPML_MASK;
+				size += 4;
+				reg &= ~E1000_VMOLR_RLPML_MASK;
+				reg |= size;
+				wr32(E1000_VMOLR(vf), reg);
+			}
+
+			adapter->vf_data[vf].vlans_enabled++;
+		}
+	} else {
+		if (i < E1000_VLVF_ARRAY_SIZE) {
+			/* remove vf from the pool */
+			reg &= ~(1 << (E1000_VLVF_POOLSEL_SHIFT + vf));
+			/* if pool is empty then remove entry from vfta */
+			if (!(reg & E1000_VLVF_POOLSEL_MASK)) {
+				reg = 0;
+				igb_vfta_set(hw, vid, false);
+			}
+			wr32(E1000_VLVF(i), reg);
+
+			/* do not modify RLPML for PF devices */
+			if (vf >= adapter->vfs_allocated_count)
+				return 0;
+
+			adapter->vf_data[vf].vlans_enabled--;
+			if (!adapter->vf_data[vf].vlans_enabled) {
+				u32 size;
+				reg = rd32(E1000_VMOLR(vf));
+				size = reg & E1000_VMOLR_RLPML_MASK;
+				size -= 4;
+				reg &= ~E1000_VMOLR_RLPML_MASK;
+				reg |= size;
+				wr32(E1000_VMOLR(vf), reg);
+			}
+		}
+	}
+	return 0;
+}
+
+static void igb_set_vmvir(struct igb_adapter *adapter, u32 vid, u32 vf)
+{
+	struct e1000_hw *hw = &adapter->hw;
+
+	if (vid)
+		wr32(E1000_VMVIR(vf), (vid | E1000_VMVIR_VLANA_DEFAULT));
+	else
+		wr32(E1000_VMVIR(vf), 0);
+}
+
+static int igb_ndo_set_vf_vlan(struct net_device *netdev,
+			       int vf, u16 vlan, u8 qos)
+{
+	int err = 0;
+	struct igb_adapter *adapter = netdev_priv(netdev);
+
+	if ((vf >= adapter->vfs_allocated_count) || (vlan > 4095) || (qos > 7))
+		return -EINVAL;
+	if (vlan || qos) {
+		err = igb_vlvf_set(adapter, vlan, !!vlan, vf);
+		if (err)
+			goto out;
+		igb_set_vmvir(adapter, vlan | (qos << VLAN_PRIO_SHIFT), vf);
+		igb_set_vmolr(adapter, vf, !vlan);
+		adapter->vf_data[vf].pf_vlan = vlan;
+		adapter->vf_data[vf].pf_qos = qos;
+		dev_info(&adapter->pdev->dev,
+			 "Setting VLAN %d, QOS 0x%x on VF %d\n", vlan, qos, vf);
+		if (test_bit(__IGB_DOWN, &adapter->state)) {
+			dev_warn(&adapter->pdev->dev,
+				 "The VF VLAN has been set,"
+				 " but the PF device is not up.\n");
+			dev_warn(&adapter->pdev->dev,
+				 "Bring the PF device up before"
+				 " attempting to use the VF device.\n");
+		}
+	} else {
+		igb_vlvf_set(adapter, adapter->vf_data[vf].pf_vlan,
+				   false, vf);
+		igb_set_vmvir(adapter, vlan, vf);
+		igb_set_vmolr(adapter, vf, true);
+		adapter->vf_data[vf].pf_vlan = 0;
+		adapter->vf_data[vf].pf_qos = 0;
+       }
+out:
+       return err;
+}
+
+static int igb_set_vf_vlan(struct igb_adapter *adapter, u32 *msgbuf, u32 vf)
+{
+	int add = (msgbuf[0] & E1000_VT_MSGINFO_MASK) >> E1000_VT_MSGINFO_SHIFT;
+	int vid = (msgbuf[1] & E1000_VLVF_VLANID_MASK);
+
+	return igb_vlvf_set(adapter, vid, add, vf);
+}
+
+static inline void igb_vf_reset(struct igb_adapter *adapter, u32 vf)
+{
+	/* clear flags - except flag that indicates PF has set the MAC */
+	adapter->vf_data[vf].flags &= IGB_VF_FLAG_PF_SET_MAC;
+	adapter->vf_data[vf].last_nack = jiffies;
+
+	/* reset offloads to defaults */
+	igb_set_vmolr(adapter, vf, true);
+
+	/* reset vlans for device */
+	igb_clear_vf_vfta(adapter, vf);
+	if (adapter->vf_data[vf].pf_vlan)
+		igb_ndo_set_vf_vlan(adapter->netdev, vf,
+				    adapter->vf_data[vf].pf_vlan,
+				    adapter->vf_data[vf].pf_qos);
+	else
+		igb_clear_vf_vfta(adapter, vf);
+
+	/* reset multicast table array for vf */
+	adapter->vf_data[vf].num_vf_mc_hashes = 0;
+
+	/* Flush and reset the mta with the new values */
+	igb_set_rx_mode(adapter->netdev);
+}
+
+static void igb_vf_reset_event(struct igb_adapter *adapter, u32 vf)
+{
+	unsigned char *vf_mac = adapter->vf_data[vf].vf_mac_addresses;
+
+	/* generate a new mac address as we were hotplug removed/added */
+	if (!(adapter->vf_data[vf].flags & IGB_VF_FLAG_PF_SET_MAC))
+		random_ether_addr(vf_mac);
+
+	/* process remaining reset events */
+	igb_vf_reset(adapter, vf);
+}
+
+static void igb_vf_reset_msg(struct igb_adapter *adapter, u32 vf)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	unsigned char *vf_mac = adapter->vf_data[vf].vf_mac_addresses;
+	int rar_entry = hw->mac.rar_entry_count - (vf + 1);
+	u32 reg, msgbuf[3];
+	u8 *addr = (u8 *)(&msgbuf[1]);
+
+	/* process all the same items cleared in a function level reset */
+	igb_vf_reset(adapter, vf);
+
+	/* set vf mac address */
+	igb_rar_set_qsel(adapter, vf_mac, rar_entry, vf);
+
+	/* enable transmit and receive for vf */
+	reg = rd32(E1000_VFTE);
+	wr32(E1000_VFTE, reg | (1 << vf));
+	reg = rd32(E1000_VFRE);
+	wr32(E1000_VFRE, reg | (1 << vf));
+
+	adapter->vf_data[vf].flags |= IGB_VF_FLAG_CTS;
+
+	/* reply to reset with ack and vf mac address */
+	msgbuf[0] = E1000_VF_RESET | E1000_VT_MSGTYPE_ACK;
+	memcpy(addr, vf_mac, 6);
+	igb_write_mbx(hw, msgbuf, 3, vf);
+}
+
+static int igb_set_vf_mac_addr(struct igb_adapter *adapter, u32 *msg, int vf)
+{
+	/*
+	 * The VF MAC Address is stored in a packed array of bytes
+	 * starting at the second 32 bit word of the msg array
+	 */
+	unsigned char *addr = (char *)&msg[1];
+	int err = -1;
+
+	if (is_valid_ether_addr(addr))
+		err = igb_set_vf_mac(adapter, vf, addr);
+
+	return err;
+}
+
+static void igb_rcv_ack_from_vf(struct igb_adapter *adapter, u32 vf)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	struct vf_data_storage *vf_data = &adapter->vf_data[vf];
+	u32 msg = E1000_VT_MSGTYPE_NACK;
+
+	/* if device isn't clear to send it shouldn't be reading either */
+	if (!(vf_data->flags & IGB_VF_FLAG_CTS) &&
+	    time_after(jiffies, vf_data->last_nack + (2 * HZ))) {
+		igb_write_mbx(hw, &msg, 1, vf);
+		vf_data->last_nack = jiffies;
+	}
+}
+
+static void igb_rcv_msg_from_vf(struct igb_adapter *adapter, u32 vf)
+{
+	struct pci_dev *pdev = adapter->pdev;
+	u32 msgbuf[E1000_VFMAILBOX_SIZE];
+	struct e1000_hw *hw = &adapter->hw;
+	struct vf_data_storage *vf_data = &adapter->vf_data[vf];
+	s32 retval;
+
+	retval = igb_read_mbx(hw, msgbuf, E1000_VFMAILBOX_SIZE, vf);
+
+	if (retval) {
+		/* if receive failed revoke VF CTS stats and restart init */
+		dev_err(&pdev->dev, "Error receiving message from VF\n");
+		vf_data->flags &= ~IGB_VF_FLAG_CTS;
+		if (!time_after(jiffies, vf_data->last_nack + (2 * HZ)))
+			return;
+		goto out;
+	}
+
+	/* this is a message we already processed, do nothing */
+	if (msgbuf[0] & (E1000_VT_MSGTYPE_ACK | E1000_VT_MSGTYPE_NACK))
+		return;
+
+	/*
+	 * until the vf completes a reset it should not be
+	 * allowed to start any configuration.
+	 */
+
+	if (msgbuf[0] == E1000_VF_RESET) {
+		igb_vf_reset_msg(adapter, vf);
+		return;
+	}
+
+	if (!(vf_data->flags & IGB_VF_FLAG_CTS)) {
+		if (!time_after(jiffies, vf_data->last_nack + (2 * HZ)))
+			return;
+		retval = -1;
+		goto out;
+	}
+
+	switch ((msgbuf[0] & 0xFFFF)) {
+	case E1000_VF_SET_MAC_ADDR:
+		retval = -EINVAL;
+		if (!(vf_data->flags & IGB_VF_FLAG_PF_SET_MAC))
+			retval = igb_set_vf_mac_addr(adapter, msgbuf, vf);
+		else
+			dev_warn(&pdev->dev,
+				 "VF %d attempted to override administratively "
+				 "set MAC address\nReload the VF driver to "
+				 "resume operations\n", vf);
+		break;
+	case E1000_VF_SET_PROMISC:
+		retval = igb_set_vf_promisc(adapter, msgbuf, vf);
+		break;
+	case E1000_VF_SET_MULTICAST:
+		retval = igb_set_vf_multicasts(adapter, msgbuf, vf);
+		break;
+	case E1000_VF_SET_LPE:
+		retval = igb_set_vf_rlpml(adapter, msgbuf[1], vf);
+		break;
+	case E1000_VF_SET_VLAN:
+		retval = -1;
+		if (vf_data->pf_vlan)
+			dev_warn(&pdev->dev,
+				 "VF %d attempted to override administratively "
+				 "set VLAN tag\nReload the VF driver to "
+				 "resume operations\n", vf);
+		else
+			retval = igb_set_vf_vlan(adapter, msgbuf, vf);
+		break;
+	default:
+		dev_err(&pdev->dev, "Unhandled Msg %08x\n", msgbuf[0]);
+		retval = -1;
+		break;
+	}
+
+	msgbuf[0] |= E1000_VT_MSGTYPE_CTS;
+out:
+	/* notify the VF of the results of what it sent us */
+	if (retval)
+		msgbuf[0] |= E1000_VT_MSGTYPE_NACK;
+	else
+		msgbuf[0] |= E1000_VT_MSGTYPE_ACK;
+
+	igb_write_mbx(hw, msgbuf, 1, vf);
+}
+
+static void igb_msg_task(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 vf;
+
+	for (vf = 0; vf < adapter->vfs_allocated_count; vf++) {
+		/* process any reset requests */
+		if (!igb_check_for_rst(hw, vf))
+			igb_vf_reset_event(adapter, vf);
+
+		/* process any messages pending */
+		if (!igb_check_for_msg(hw, vf))
+			igb_rcv_msg_from_vf(adapter, vf);
+
+		/* process any acks */
+		if (!igb_check_for_ack(hw, vf))
+			igb_rcv_ack_from_vf(adapter, vf);
+	}
+}
+
+/**
+ *  igb_set_uta - Set unicast filter table address
+ *  @adapter: board private structure
+ *
+ *  The unicast table address is a register array of 32-bit registers.
+ *  The table is meant to be used in a way similar to how the MTA is used
+ *  however due to certain limitations in the hardware it is necessary to
+ *  set all the hash bits to 1 and use the VMOLR ROPE bit as a promiscuous
+ *  enable bit to allow vlan tag stripping when promiscuous mode is enabled
+ **/
+static void igb_set_uta(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	int i;
+
+	/* The UTA table only exists on 82576 hardware and newer */
+	if (hw->mac.type < e1000_82576)
+		return;
+
+	/* we only need to do this if VMDq is enabled */
+	if (!adapter->vfs_allocated_count)
+		return;
+
+	for (i = 0; i < hw->mac.uta_reg_count; i++)
+		array_wr32(E1000_UTA, i, ~0);
+}
+
+/**
+ * igb_intr_msi - Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ **/
+static irqreturn_t igb_intr_msi(int irq, void *data)
+{
+	struct igb_adapter *adapter = data;
+	struct igb_q_vector *q_vector = adapter->q_vector[0];
+	struct e1000_hw *hw = &adapter->hw;
+	/* read ICR disables interrupts using IAM */
+	u32 icr = rd32(E1000_ICR);
+
+	igb_write_itr(q_vector);
+
+	if (icr & E1000_ICR_DRSTA)
+		schedule_work(&adapter->reset_task);
+
+	if (icr & E1000_ICR_DOUTSYNC) {
+		/* HW is reporting DMA is out of sync */
+		adapter->stats.doosync++;
+	}
+
+	if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
+		hw->mac.get_link_status = 1;
+		if (!test_bit(__IGB_DOWN, &adapter->state))
+			mod_timer(&adapter->watchdog_timer, jiffies + 1);
+	}
+
+	napi_schedule(&q_vector->napi);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * igb_intr - Legacy Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ **/
+static irqreturn_t igb_intr(int irq, void *data)
+{
+	struct igb_adapter *adapter = data;
+	struct igb_q_vector *q_vector = adapter->q_vector[0];
+	struct e1000_hw *hw = &adapter->hw;
+	/* Interrupt Auto-Mask...upon reading ICR, interrupts are masked.  No
+	 * need for the IMC write */
+	u32 icr = rd32(E1000_ICR);
+
+	/* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
+	 * not set, then the adapter didn't send an interrupt */
+	if (!(icr & E1000_ICR_INT_ASSERTED))
+		return IRQ_NONE;
+
+	igb_write_itr(q_vector);
+
+	if (icr & E1000_ICR_DRSTA)
+		schedule_work(&adapter->reset_task);
+
+	if (icr & E1000_ICR_DOUTSYNC) {
+		/* HW is reporting DMA is out of sync */
+		adapter->stats.doosync++;
+	}
+
+	if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
+		hw->mac.get_link_status = 1;
+		/* guard against interrupt when we're going down */
+		if (!test_bit(__IGB_DOWN, &adapter->state))
+			mod_timer(&adapter->watchdog_timer, jiffies + 1);
+	}
+
+	napi_schedule(&q_vector->napi);
+
+	return IRQ_HANDLED;
+}
+
+void igb_ring_irq_enable(struct igb_q_vector *q_vector)
+{
+	struct igb_adapter *adapter = q_vector->adapter;
+	struct e1000_hw *hw = &adapter->hw;
+
+	if ((q_vector->rx.ring && (adapter->rx_itr_setting & 3)) ||
+	    (!q_vector->rx.ring && (adapter->tx_itr_setting & 3))) {
+		if ((adapter->num_q_vectors == 1) && !adapter->vf_data)
+			igb_set_itr(q_vector);
+		else
+			igb_update_ring_itr(q_vector);
+	}
+
+	if (!test_bit(__IGB_DOWN, &adapter->state)) {
+		if (adapter->msix_entries)
+			wr32(E1000_EIMS, q_vector->eims_value);
+		else
+			igb_irq_enable(adapter);
+	}
+}
+
+/**
+ * igb_poll - NAPI Rx polling callback
+ * @napi: napi polling structure
+ * @budget: count of how many packets we should handle
+ **/
+static int igb_poll(struct napi_struct *napi, int budget)
+{
+	struct igb_q_vector *q_vector = container_of(napi,
+	                                             struct igb_q_vector,
+	                                             napi);
+	bool clean_complete = true;
+
+#ifdef CONFIG_IGB_DCA
+	if (q_vector->adapter->flags & IGB_FLAG_DCA_ENABLED)
+		igb_update_dca(q_vector);
+#endif
+	if (q_vector->tx.ring)
+		clean_complete = igb_clean_tx_irq(q_vector);
+
+	if (q_vector->rx.ring)
+		clean_complete &= igb_clean_rx_irq(q_vector, budget);
+
+	/* If all work not completed, return budget and keep polling */
+	if (!clean_complete)
+		return budget;
+
+	/* If not enough Rx work done, exit the polling mode */
+	napi_complete(napi);
+	igb_ring_irq_enable(q_vector);
+
+	return 0;
+}
+
+/**
+ * igb_systim_to_hwtstamp - convert system time value to hw timestamp
+ * @adapter: board private structure
+ * @shhwtstamps: timestamp structure to update
+ * @regval: unsigned 64bit system time value.
+ *
+ * We need to convert the system time value stored in the RX/TXSTMP registers
+ * into a hwtstamp which can be used by the upper level timestamping functions
+ */
+static void igb_systim_to_hwtstamp(struct igb_adapter *adapter,
+                                   struct skb_shared_hwtstamps *shhwtstamps,
+                                   u64 regval)
+{
+	u64 ns;
+
+	/*
+	 * The 82580 starts with 1ns at bit 0 in RX/TXSTMPL, shift this up to
+	 * 24 to match clock shift we setup earlier.
+	 */
+	if (adapter->hw.mac.type >= e1000_82580)
+		regval <<= IGB_82580_TSYNC_SHIFT;
+
+	ns = timecounter_cyc2time(&adapter->clock, regval);
+	timecompare_update(&adapter->compare, ns);
+	memset(shhwtstamps, 0, sizeof(struct skb_shared_hwtstamps));
+	shhwtstamps->hwtstamp = ns_to_ktime(ns);
+	shhwtstamps->syststamp = timecompare_transform(&adapter->compare, ns);
+}
+
+/**
+ * igb_tx_hwtstamp - utility function which checks for TX time stamp
+ * @q_vector: pointer to q_vector containing needed info
+ * @buffer: pointer to igb_tx_buffer structure
+ *
+ * If we were asked to do hardware stamping and such a time stamp is
+ * available, then it must have been for this skb here because we only
+ * allow only one such packet into the queue.
+ */
+static void igb_tx_hwtstamp(struct igb_q_vector *q_vector,
+			    struct igb_tx_buffer *buffer_info)
+{
+	struct igb_adapter *adapter = q_vector->adapter;
+	struct e1000_hw *hw = &adapter->hw;
+	struct skb_shared_hwtstamps shhwtstamps;
+	u64 regval;
+
+	/* if skb does not support hw timestamp or TX stamp not valid exit */
+	if (likely(!(buffer_info->tx_flags & IGB_TX_FLAGS_TSTAMP)) ||
+	    !(rd32(E1000_TSYNCTXCTL) & E1000_TSYNCTXCTL_VALID))
+		return;
+
+	regval = rd32(E1000_TXSTMPL);
+	regval |= (u64)rd32(E1000_TXSTMPH) << 32;
+
+	igb_systim_to_hwtstamp(adapter, &shhwtstamps, regval);
+	skb_tstamp_tx(buffer_info->skb, &shhwtstamps);
+}
+
+/**
+ * igb_clean_tx_irq - Reclaim resources after transmit completes
+ * @q_vector: pointer to q_vector containing needed info
+ * returns true if ring is completely cleaned
+ **/
+static bool igb_clean_tx_irq(struct igb_q_vector *q_vector)
+{
+	struct igb_adapter *adapter = q_vector->adapter;
+	struct igb_ring *tx_ring = q_vector->tx.ring;
+	struct igb_tx_buffer *tx_buffer;
+	union e1000_adv_tx_desc *tx_desc, *eop_desc;
+	unsigned int total_bytes = 0, total_packets = 0;
+	unsigned int budget = q_vector->tx.work_limit;
+	unsigned int i = tx_ring->next_to_clean;
+
+	if (test_bit(__IGB_DOWN, &adapter->state))
+		return true;
+
+	tx_buffer = &tx_ring->tx_buffer_info[i];
+	tx_desc = IGB_TX_DESC(tx_ring, i);
+	i -= tx_ring->count;
+
+	for (; budget; budget--) {
+		eop_desc = tx_buffer->next_to_watch;
+
+		/* prevent any other reads prior to eop_desc */
+		rmb();
+
+		/* if next_to_watch is not set then there is no work pending */
+		if (!eop_desc)
+			break;
+
+		/* if DD is not set pending work has not been completed */
+		if (!(eop_desc->wb.status & cpu_to_le32(E1000_TXD_STAT_DD)))
+			break;
+
+		/* clear next_to_watch to prevent false hangs */
+		tx_buffer->next_to_watch = NULL;
+
+		/* update the statistics for this packet */
+		total_bytes += tx_buffer->bytecount;
+		total_packets += tx_buffer->gso_segs;
+
+		/* retrieve hardware timestamp */
+		igb_tx_hwtstamp(q_vector, tx_buffer);
+
+		/* free the skb */
+		dev_kfree_skb_any(tx_buffer->skb);
+		tx_buffer->skb = NULL;
+
+		/* unmap skb header data */
+		dma_unmap_single(tx_ring->dev,
+				 tx_buffer->dma,
+				 tx_buffer->length,
+				 DMA_TO_DEVICE);
+
+		/* clear last DMA location and unmap remaining buffers */
+		while (tx_desc != eop_desc) {
+			tx_buffer->dma = 0;
+
+			tx_buffer++;
+			tx_desc++;
+			i++;
+			if (unlikely(!i)) {
+				i -= tx_ring->count;
+				tx_buffer = tx_ring->tx_buffer_info;
+				tx_desc = IGB_TX_DESC(tx_ring, 0);
+			}
+
+			/* unmap any remaining paged data */
+			if (tx_buffer->dma) {
+				dma_unmap_page(tx_ring->dev,
+					       tx_buffer->dma,
+					       tx_buffer->length,
+					       DMA_TO_DEVICE);
+			}
+		}
+
+		/* clear last DMA location */
+		tx_buffer->dma = 0;
+
+		/* move us one more past the eop_desc for start of next pkt */
+		tx_buffer++;
+		tx_desc++;
+		i++;
+		if (unlikely(!i)) {
+			i -= tx_ring->count;
+			tx_buffer = tx_ring->tx_buffer_info;
+			tx_desc = IGB_TX_DESC(tx_ring, 0);
+		}
+	}
+
+	i += tx_ring->count;
+	tx_ring->next_to_clean = i;
+	u64_stats_update_begin(&tx_ring->tx_syncp);
+	tx_ring->tx_stats.bytes += total_bytes;
+	tx_ring->tx_stats.packets += total_packets;
+	u64_stats_update_end(&tx_ring->tx_syncp);
+	q_vector->tx.total_bytes += total_bytes;
+	q_vector->tx.total_packets += total_packets;
+
+	if (test_bit(IGB_RING_FLAG_TX_DETECT_HANG, &tx_ring->flags)) {
+		struct e1000_hw *hw = &adapter->hw;
+
+		eop_desc = tx_buffer->next_to_watch;
+
+		/* Detect a transmit hang in hardware, this serializes the
+		 * check with the clearing of time_stamp and movement of i */
+		clear_bit(IGB_RING_FLAG_TX_DETECT_HANG, &tx_ring->flags);
+		if (eop_desc &&
+		    time_after(jiffies, tx_buffer->time_stamp +
+			       (adapter->tx_timeout_factor * HZ)) &&
+		    !(rd32(E1000_STATUS) & E1000_STATUS_TXOFF)) {
+
+			/* detected Tx unit hang */
+			dev_err(tx_ring->dev,
+				"Detected Tx Unit Hang\n"
+				"  Tx Queue             <%d>\n"
+				"  TDH                  <%x>\n"
+				"  TDT                  <%x>\n"
+				"  next_to_use          <%x>\n"
+				"  next_to_clean        <%x>\n"
+				"buffer_info[next_to_clean]\n"
+				"  time_stamp           <%lx>\n"
+				"  next_to_watch        <%p>\n"
+				"  jiffies              <%lx>\n"
+				"  desc.status          <%x>\n",
+				tx_ring->queue_index,
+				rd32(E1000_TDH(tx_ring->reg_idx)),
+				readl(tx_ring->tail),
+				tx_ring->next_to_use,
+				tx_ring->next_to_clean,
+				tx_buffer->time_stamp,
+				eop_desc,
+				jiffies,
+				eop_desc->wb.status);
+			netif_stop_subqueue(tx_ring->netdev,
+					    tx_ring->queue_index);
+
+			/* we are about to reset, no point in enabling stuff */
+			return true;
+		}
+	}
+
+	if (unlikely(total_packets &&
+		     netif_carrier_ok(tx_ring->netdev) &&
+		     igb_desc_unused(tx_ring) >= IGB_TX_QUEUE_WAKE)) {
+		/* Make sure that anybody stopping the queue after this
+		 * sees the new next_to_clean.
+		 */
+		smp_mb();
+		if (__netif_subqueue_stopped(tx_ring->netdev,
+					     tx_ring->queue_index) &&
+		    !(test_bit(__IGB_DOWN, &adapter->state))) {
+			netif_wake_subqueue(tx_ring->netdev,
+					    tx_ring->queue_index);
+
+			u64_stats_update_begin(&tx_ring->tx_syncp);
+			tx_ring->tx_stats.restart_queue++;
+			u64_stats_update_end(&tx_ring->tx_syncp);
+		}
+	}
+
+	return !!budget;
+}
+
+static inline void igb_rx_checksum(struct igb_ring *ring,
+				   union e1000_adv_rx_desc *rx_desc,
+				   struct sk_buff *skb)
+{
+	skb_checksum_none_assert(skb);
+
+	/* Ignore Checksum bit is set */
+	if (igb_test_staterr(rx_desc, E1000_RXD_STAT_IXSM))
+		return;
+
+	/* Rx checksum disabled via ethtool */
+	if (!(ring->netdev->features & NETIF_F_RXCSUM))
+		return;
+
+	/* TCP/UDP checksum error bit is set */
+	if (igb_test_staterr(rx_desc,
+			     E1000_RXDEXT_STATERR_TCPE |
+			     E1000_RXDEXT_STATERR_IPE)) {
+		/*
+		 * work around errata with sctp packets where the TCPE aka
+		 * L4E bit is set incorrectly on 64 byte (60 byte w/o crc)
+		 * packets, (aka let the stack check the crc32c)
+		 */
+		if (!((skb->len == 60) &&
+		      test_bit(IGB_RING_FLAG_RX_SCTP_CSUM, &ring->flags))) {
+			u64_stats_update_begin(&ring->rx_syncp);
+			ring->rx_stats.csum_err++;
+			u64_stats_update_end(&ring->rx_syncp);
+		}
+		/* let the stack verify checksum errors */
+		return;
+	}
+	/* It must be a TCP or UDP packet with a valid checksum */
+	if (igb_test_staterr(rx_desc, E1000_RXD_STAT_TCPCS |
+				      E1000_RXD_STAT_UDPCS))
+		skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+	dev_dbg(ring->dev, "cksum success: bits %08X\n",
+		le32_to_cpu(rx_desc->wb.upper.status_error));
+}
+
+static inline void igb_rx_hash(struct igb_ring *ring,
+			       union e1000_adv_rx_desc *rx_desc,
+			       struct sk_buff *skb)
+{
+	if (ring->netdev->features & NETIF_F_RXHASH)
+		skb->rxhash = le32_to_cpu(rx_desc->wb.lower.hi_dword.rss);
+}
+
+static void igb_rx_hwtstamp(struct igb_q_vector *q_vector,
+			    union e1000_adv_rx_desc *rx_desc,
+			    struct sk_buff *skb)
+{
+	struct igb_adapter *adapter = q_vector->adapter;
+	struct e1000_hw *hw = &adapter->hw;
+	u64 regval;
+
+	if (!igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TSIP |
+				       E1000_RXDADV_STAT_TS))
+		return;
+
+	/*
+	 * If this bit is set, then the RX registers contain the time stamp. No
+	 * other packet will be time stamped until we read these registers, so
+	 * read the registers to make them available again. Because only one
+	 * packet can be time stamped at a time, we know that the register
+	 * values must belong to this one here and therefore we don't need to
+	 * compare any of the additional attributes stored for it.
+	 *
+	 * If nothing went wrong, then it should have a shared tx_flags that we
+	 * can turn into a skb_shared_hwtstamps.
+	 */
+	if (igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TSIP)) {
+		u32 *stamp = (u32 *)skb->data;
+		regval = le32_to_cpu(*(stamp + 2));
+		regval |= (u64)le32_to_cpu(*(stamp + 3)) << 32;
+		skb_pull(skb, IGB_TS_HDR_LEN);
+	} else {
+		if(!(rd32(E1000_TSYNCRXCTL) & E1000_TSYNCRXCTL_VALID))
+			return;
+
+		regval = rd32(E1000_RXSTMPL);
+		regval |= (u64)rd32(E1000_RXSTMPH) << 32;
+	}
+
+	igb_systim_to_hwtstamp(adapter, skb_hwtstamps(skb), regval);
+}
+
+static void igb_rx_vlan(struct igb_ring *ring,
+			union e1000_adv_rx_desc *rx_desc,
+			struct sk_buff *skb)
+{
+	if (igb_test_staterr(rx_desc, E1000_RXD_STAT_VP)) {
+		u16 vid;
+		if (igb_test_staterr(rx_desc, E1000_RXDEXT_STATERR_LB) &&
+		    test_bit(IGB_RING_FLAG_RX_LB_VLAN_BSWAP, &ring->flags))
+			vid = be16_to_cpu(rx_desc->wb.upper.vlan);
+		else
+			vid = le16_to_cpu(rx_desc->wb.upper.vlan);
+
+		__vlan_hwaccel_put_tag(skb, vid);
+	}
+}
+
+static inline u16 igb_get_hlen(union e1000_adv_rx_desc *rx_desc)
+{
+	/* HW will not DMA in data larger than the given buffer, even if it
+	 * parses the (NFS, of course) header to be larger.  In that case, it
+	 * fills the header buffer and spills the rest into the page.
+	 */
+	u16 hlen = (le16_to_cpu(rx_desc->wb.lower.lo_dword.hdr_info) &
+	           E1000_RXDADV_HDRBUFLEN_MASK) >> E1000_RXDADV_HDRBUFLEN_SHIFT;
+	if (hlen > IGB_RX_HDR_LEN)
+		hlen = IGB_RX_HDR_LEN;
+	return hlen;
+}
+
+static bool igb_clean_rx_irq(struct igb_q_vector *q_vector, int budget)
+{
+	struct igb_ring *rx_ring = q_vector->rx.ring;
+	union e1000_adv_rx_desc *rx_desc;
+	const int current_node = numa_node_id();
+	unsigned int total_bytes = 0, total_packets = 0;
+	u16 cleaned_count = igb_desc_unused(rx_ring);
+	u16 i = rx_ring->next_to_clean;
+
+	rx_desc = IGB_RX_DESC(rx_ring, i);
+
+	while (igb_test_staterr(rx_desc, E1000_RXD_STAT_DD)) {
+		struct igb_rx_buffer *buffer_info = &rx_ring->rx_buffer_info[i];
+		struct sk_buff *skb = buffer_info->skb;
+		union e1000_adv_rx_desc *next_rxd;
+
+		buffer_info->skb = NULL;
+		prefetch(skb->data);
+
+		i++;
+		if (i == rx_ring->count)
+			i = 0;
+
+		next_rxd = IGB_RX_DESC(rx_ring, i);
+		prefetch(next_rxd);
+
+		/*
+		 * This memory barrier is needed to keep us from reading
+		 * any other fields out of the rx_desc until we know the
+		 * RXD_STAT_DD bit is set
+		 */
+		rmb();
+
+		if (!skb_is_nonlinear(skb)) {
+			__skb_put(skb, igb_get_hlen(rx_desc));
+			dma_unmap_single(rx_ring->dev, buffer_info->dma,
+					 IGB_RX_HDR_LEN,
+					 DMA_FROM_DEVICE);
+			buffer_info->dma = 0;
+		}
+
+		if (rx_desc->wb.upper.length) {
+			u16 length = le16_to_cpu(rx_desc->wb.upper.length);
+
+			skb_fill_page_desc(skb, skb_shinfo(skb)->nr_frags,
+						buffer_info->page,
+						buffer_info->page_offset,
+						length);
+
+			skb->len += length;
+			skb->data_len += length;
+			skb->truesize += PAGE_SIZE / 2;
+
+			if ((page_count(buffer_info->page) != 1) ||
+			    (page_to_nid(buffer_info->page) != current_node))
+				buffer_info->page = NULL;
+			else
+				get_page(buffer_info->page);
+
+			dma_unmap_page(rx_ring->dev, buffer_info->page_dma,
+				       PAGE_SIZE / 2, DMA_FROM_DEVICE);
+			buffer_info->page_dma = 0;
+		}
+
+		if (!igb_test_staterr(rx_desc, E1000_RXD_STAT_EOP)) {
+			struct igb_rx_buffer *next_buffer;
+			next_buffer = &rx_ring->rx_buffer_info[i];
+			buffer_info->skb = next_buffer->skb;
+			buffer_info->dma = next_buffer->dma;
+			next_buffer->skb = skb;
+			next_buffer->dma = 0;
+			goto next_desc;
+		}
+
+		if (igb_test_staterr(rx_desc,
+				     E1000_RXDEXT_ERR_FRAME_ERR_MASK)) {
+			dev_kfree_skb_any(skb);
+			goto next_desc;
+		}
+
+		igb_rx_hwtstamp(q_vector, rx_desc, skb);
+		igb_rx_hash(rx_ring, rx_desc, skb);
+		igb_rx_checksum(rx_ring, rx_desc, skb);
+		igb_rx_vlan(rx_ring, rx_desc, skb);
+
+		total_bytes += skb->len;
+		total_packets++;
+
+		skb->protocol = eth_type_trans(skb, rx_ring->netdev);
+
+		napi_gro_receive(&q_vector->napi, skb);
+
+		budget--;
+next_desc:
+		if (!budget)
+			break;
+
+		cleaned_count++;
+		/* return some buffers to hardware, one at a time is too slow */
+		if (cleaned_count >= IGB_RX_BUFFER_WRITE) {
+			igb_alloc_rx_buffers(rx_ring, cleaned_count);
+			cleaned_count = 0;
+		}
+
+		/* use prefetched values */
+		rx_desc = next_rxd;
+	}
+
+	rx_ring->next_to_clean = i;
+	u64_stats_update_begin(&rx_ring->rx_syncp);
+	rx_ring->rx_stats.packets += total_packets;
+	rx_ring->rx_stats.bytes += total_bytes;
+	u64_stats_update_end(&rx_ring->rx_syncp);
+	q_vector->rx.total_packets += total_packets;
+	q_vector->rx.total_bytes += total_bytes;
+
+	if (cleaned_count)
+		igb_alloc_rx_buffers(rx_ring, cleaned_count);
+
+	return !!budget;
+}
+
+static bool igb_alloc_mapped_skb(struct igb_ring *rx_ring,
+				 struct igb_rx_buffer *bi)
+{
+	struct sk_buff *skb = bi->skb;
+	dma_addr_t dma = bi->dma;
+
+	if (dma)
+		return true;
+
+	if (likely(!skb)) {
+		skb = netdev_alloc_skb_ip_align(rx_ring->netdev,
+						IGB_RX_HDR_LEN);
+		bi->skb = skb;
+		if (!skb) {
+			rx_ring->rx_stats.alloc_failed++;
+			return false;
+		}
+
+		/* initialize skb for ring */
+		skb_record_rx_queue(skb, rx_ring->queue_index);
+	}
+
+	dma = dma_map_single(rx_ring->dev, skb->data,
+			     IGB_RX_HDR_LEN, DMA_FROM_DEVICE);
+
+	if (dma_mapping_error(rx_ring->dev, dma)) {
+		rx_ring->rx_stats.alloc_failed++;
+		return false;
+	}
+
+	bi->dma = dma;
+	return true;
+}
+
+static bool igb_alloc_mapped_page(struct igb_ring *rx_ring,
+				  struct igb_rx_buffer *bi)
+{
+	struct page *page = bi->page;
+	dma_addr_t page_dma = bi->page_dma;
+	unsigned int page_offset = bi->page_offset ^ (PAGE_SIZE / 2);
+
+	if (page_dma)
+		return true;
+
+	if (!page) {
+		page = netdev_alloc_page(rx_ring->netdev);
+		bi->page = page;
+		if (unlikely(!page)) {
+			rx_ring->rx_stats.alloc_failed++;
+			return false;
+		}
+	}
+
+	page_dma = dma_map_page(rx_ring->dev, page,
+				page_offset, PAGE_SIZE / 2,
+				DMA_FROM_DEVICE);
+
+	if (dma_mapping_error(rx_ring->dev, page_dma)) {
+		rx_ring->rx_stats.alloc_failed++;
+		return false;
+	}
+
+	bi->page_dma = page_dma;
+	bi->page_offset = page_offset;
+	return true;
+}
+
+/**
+ * igb_alloc_rx_buffers - Replace used receive buffers; packet split
+ * @adapter: address of board private structure
+ **/
+void igb_alloc_rx_buffers(struct igb_ring *rx_ring, u16 cleaned_count)
+{
+	union e1000_adv_rx_desc *rx_desc;
+	struct igb_rx_buffer *bi;
+	u16 i = rx_ring->next_to_use;
+
+	rx_desc = IGB_RX_DESC(rx_ring, i);
+	bi = &rx_ring->rx_buffer_info[i];
+	i -= rx_ring->count;
+
+	while (cleaned_count--) {
+		if (!igb_alloc_mapped_skb(rx_ring, bi))
+			break;
+
+		/* Refresh the desc even if buffer_addrs didn't change
+		 * because each write-back erases this info. */
+		rx_desc->read.hdr_addr = cpu_to_le64(bi->dma);
+
+		if (!igb_alloc_mapped_page(rx_ring, bi))
+			break;
+
+		rx_desc->read.pkt_addr = cpu_to_le64(bi->page_dma);
+
+		rx_desc++;
+		bi++;
+		i++;
+		if (unlikely(!i)) {
+			rx_desc = IGB_RX_DESC(rx_ring, 0);
+			bi = rx_ring->rx_buffer_info;
+			i -= rx_ring->count;
+		}
+
+		/* clear the hdr_addr for the next_to_use descriptor */
+		rx_desc->read.hdr_addr = 0;
+	}
+
+	i += rx_ring->count;
+
+	if (rx_ring->next_to_use != i) {
+		rx_ring->next_to_use = i;
+
+		/* Force memory writes to complete before letting h/w
+		 * know there are new descriptors to fetch.  (Only
+		 * applicable for weak-ordered memory model archs,
+		 * such as IA-64). */
+		wmb();
+		writel(i, rx_ring->tail);
+	}
+}
+
+/**
+ * igb_mii_ioctl -
+ * @netdev:
+ * @ifreq:
+ * @cmd:
+ **/
+static int igb_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct mii_ioctl_data *data = if_mii(ifr);
+
+	if (adapter->hw.phy.media_type != e1000_media_type_copper)
+		return -EOPNOTSUPP;
+
+	switch (cmd) {
+	case SIOCGMIIPHY:
+		data->phy_id = adapter->hw.phy.addr;
+		break;
+	case SIOCGMIIREG:
+		if (igb_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
+		                     &data->val_out))
+			return -EIO;
+		break;
+	case SIOCSMIIREG:
+	default:
+		return -EOPNOTSUPP;
+	}
+	return 0;
+}
+
+/**
+ * igb_hwtstamp_ioctl - control hardware time stamping
+ * @netdev:
+ * @ifreq:
+ * @cmd:
+ *
+ * Outgoing time stamping can be enabled and disabled. Play nice and
+ * disable it when requested, although it shouldn't case any overhead
+ * when no packet needs it. At most one packet in the queue may be
+ * marked for time stamping, otherwise it would be impossible to tell
+ * for sure to which packet the hardware time stamp belongs.
+ *
+ * Incoming time stamping has to be configured via the hardware
+ * filters. Not all combinations are supported, in particular event
+ * type has to be specified. Matching the kind of event packet is
+ * not supported, with the exception of "all V2 events regardless of
+ * level 2 or 4".
+ *
+ **/
+static int igb_hwtstamp_ioctl(struct net_device *netdev,
+			      struct ifreq *ifr, int cmd)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	struct hwtstamp_config config;
+	u32 tsync_tx_ctl = E1000_TSYNCTXCTL_ENABLED;
+	u32 tsync_rx_ctl = E1000_TSYNCRXCTL_ENABLED;
+	u32 tsync_rx_cfg = 0;
+	bool is_l4 = false;
+	bool is_l2 = false;
+	u32 regval;
+
+	if (copy_from_user(&config, ifr->ifr_data, sizeof(config)))
+		return -EFAULT;
+
+	/* reserved for future extensions */
+	if (config.flags)
+		return -EINVAL;
+
+	switch (config.tx_type) {
+	case HWTSTAMP_TX_OFF:
+		tsync_tx_ctl = 0;
+	case HWTSTAMP_TX_ON:
+		break;
+	default:
+		return -ERANGE;
+	}
+
+	switch (config.rx_filter) {
+	case HWTSTAMP_FILTER_NONE:
+		tsync_rx_ctl = 0;
+		break;
+	case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
+	case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
+	case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
+	case HWTSTAMP_FILTER_ALL:
+		/*
+		 * register TSYNCRXCFG must be set, therefore it is not
+		 * possible to time stamp both Sync and Delay_Req messages
+		 * => fall back to time stamping all packets
+		 */
+		tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_ALL;
+		config.rx_filter = HWTSTAMP_FILTER_ALL;
+		break;
+	case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
+		tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L4_V1;
+		tsync_rx_cfg = E1000_TSYNCRXCFG_PTP_V1_SYNC_MESSAGE;
+		is_l4 = true;
+		break;
+	case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
+		tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L4_V1;
+		tsync_rx_cfg = E1000_TSYNCRXCFG_PTP_V1_DELAY_REQ_MESSAGE;
+		is_l4 = true;
+		break;
+	case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
+	case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
+		tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_L4_V2;
+		tsync_rx_cfg = E1000_TSYNCRXCFG_PTP_V2_SYNC_MESSAGE;
+		is_l2 = true;
+		is_l4 = true;
+		config.rx_filter = HWTSTAMP_FILTER_SOME;
+		break;
+	case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
+	case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
+		tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_L4_V2;
+		tsync_rx_cfg = E1000_TSYNCRXCFG_PTP_V2_DELAY_REQ_MESSAGE;
+		is_l2 = true;
+		is_l4 = true;
+		config.rx_filter = HWTSTAMP_FILTER_SOME;
+		break;
+	case HWTSTAMP_FILTER_PTP_V2_EVENT:
+	case HWTSTAMP_FILTER_PTP_V2_SYNC:
+	case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
+		tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_EVENT_V2;
+		config.rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT;
+		is_l2 = true;
+		is_l4 = true;
+		break;
+	default:
+		return -ERANGE;
+	}
+
+	if (hw->mac.type == e1000_82575) {
+		if (tsync_rx_ctl | tsync_tx_ctl)
+			return -EINVAL;
+		return 0;
+	}
+
+	/*
+	 * Per-packet timestamping only works if all packets are
+	 * timestamped, so enable timestamping in all packets as
+	 * long as one rx filter was configured.
+	 */
+	if ((hw->mac.type >= e1000_82580) && tsync_rx_ctl) {
+		tsync_rx_ctl = E1000_TSYNCRXCTL_ENABLED;
+		tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_ALL;
+	}
+
+	/* enable/disable TX */
+	regval = rd32(E1000_TSYNCTXCTL);
+	regval &= ~E1000_TSYNCTXCTL_ENABLED;
+	regval |= tsync_tx_ctl;
+	wr32(E1000_TSYNCTXCTL, regval);
+
+	/* enable/disable RX */
+	regval = rd32(E1000_TSYNCRXCTL);
+	regval &= ~(E1000_TSYNCRXCTL_ENABLED | E1000_TSYNCRXCTL_TYPE_MASK);
+	regval |= tsync_rx_ctl;
+	wr32(E1000_TSYNCRXCTL, regval);
+
+	/* define which PTP packets are time stamped */
+	wr32(E1000_TSYNCRXCFG, tsync_rx_cfg);
+
+	/* define ethertype filter for timestamped packets */
+	if (is_l2)
+		wr32(E1000_ETQF(3),
+		                (E1000_ETQF_FILTER_ENABLE | /* enable filter */
+		                 E1000_ETQF_1588 | /* enable timestamping */
+		                 ETH_P_1588));     /* 1588 eth protocol type */
+	else
+		wr32(E1000_ETQF(3), 0);
+
+#define PTP_PORT 319
+	/* L4 Queue Filter[3]: filter by destination port and protocol */
+	if (is_l4) {
+		u32 ftqf = (IPPROTO_UDP /* UDP */
+			| E1000_FTQF_VF_BP /* VF not compared */
+			| E1000_FTQF_1588_TIME_STAMP /* Enable Timestamping */
+			| E1000_FTQF_MASK); /* mask all inputs */
+		ftqf &= ~E1000_FTQF_MASK_PROTO_BP; /* enable protocol check */
+
+		wr32(E1000_IMIR(3), htons(PTP_PORT));
+		wr32(E1000_IMIREXT(3),
+		     (E1000_IMIREXT_SIZE_BP | E1000_IMIREXT_CTRL_BP));
+		if (hw->mac.type == e1000_82576) {
+			/* enable source port check */
+			wr32(E1000_SPQF(3), htons(PTP_PORT));
+			ftqf &= ~E1000_FTQF_MASK_SOURCE_PORT_BP;
+		}
+		wr32(E1000_FTQF(3), ftqf);
+	} else {
+		wr32(E1000_FTQF(3), E1000_FTQF_MASK);
+	}
+	wrfl();
+
+	adapter->hwtstamp_config = config;
+
+	/* clear TX/RX time stamp registers, just to be sure */
+	regval = rd32(E1000_TXSTMPH);
+	regval = rd32(E1000_RXSTMPH);
+
+	return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ?
+		-EFAULT : 0;
+}
+
+/**
+ * igb_ioctl -
+ * @netdev:
+ * @ifreq:
+ * @cmd:
+ **/
+static int igb_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+	switch (cmd) {
+	case SIOCGMIIPHY:
+	case SIOCGMIIREG:
+	case SIOCSMIIREG:
+		return igb_mii_ioctl(netdev, ifr, cmd);
+	case SIOCSHWTSTAMP:
+		return igb_hwtstamp_ioctl(netdev, ifr, cmd);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+s32 igb_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
+{
+	struct igb_adapter *adapter = hw->back;
+	u16 cap_offset;
+
+	cap_offset = adapter->pdev->pcie_cap;
+	if (!cap_offset)
+		return -E1000_ERR_CONFIG;
+
+	pci_read_config_word(adapter->pdev, cap_offset + reg, value);
+
+	return 0;
+}
+
+s32 igb_write_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
+{
+	struct igb_adapter *adapter = hw->back;
+	u16 cap_offset;
+
+	cap_offset = adapter->pdev->pcie_cap;
+	if (!cap_offset)
+		return -E1000_ERR_CONFIG;
+
+	pci_write_config_word(adapter->pdev, cap_offset + reg, *value);
+
+	return 0;
+}
+
+static void igb_vlan_mode(struct net_device *netdev, u32 features)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	u32 ctrl, rctl;
+	bool enable = !!(features & NETIF_F_HW_VLAN_RX);
+
+	if (enable) {
+		/* enable VLAN tag insert/strip */
+		ctrl = rd32(E1000_CTRL);
+		ctrl |= E1000_CTRL_VME;
+		wr32(E1000_CTRL, ctrl);
+
+		/* Disable CFI check */
+		rctl = rd32(E1000_RCTL);
+		rctl &= ~E1000_RCTL_CFIEN;
+		wr32(E1000_RCTL, rctl);
+	} else {
+		/* disable VLAN tag insert/strip */
+		ctrl = rd32(E1000_CTRL);
+		ctrl &= ~E1000_CTRL_VME;
+		wr32(E1000_CTRL, ctrl);
+	}
+
+	igb_rlpml_set(adapter);
+}
+
+static void igb_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	int pf_id = adapter->vfs_allocated_count;
+
+	/* attempt to add filter to vlvf array */
+	igb_vlvf_set(adapter, vid, true, pf_id);
+
+	/* add the filter since PF can receive vlans w/o entry in vlvf */
+	igb_vfta_set(hw, vid, true);
+
+	set_bit(vid, adapter->active_vlans);
+}
+
+static void igb_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	int pf_id = adapter->vfs_allocated_count;
+	s32 err;
+
+	/* remove vlan from VLVF table array */
+	err = igb_vlvf_set(adapter, vid, false, pf_id);
+
+	/* if vid was not present in VLVF just remove it from table */
+	if (err)
+		igb_vfta_set(hw, vid, false);
+
+	clear_bit(vid, adapter->active_vlans);
+}
+
+static void igb_restore_vlan(struct igb_adapter *adapter)
+{
+	u16 vid;
+
+	igb_vlan_mode(adapter->netdev, adapter->netdev->features);
+
+	for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
+		igb_vlan_rx_add_vid(adapter->netdev, vid);
+}
+
+int igb_set_spd_dplx(struct igb_adapter *adapter, u32 spd, u8 dplx)
+{
+	struct pci_dev *pdev = adapter->pdev;
+	struct e1000_mac_info *mac = &adapter->hw.mac;
+
+	mac->autoneg = 0;
+
+	/* Make sure dplx is at most 1 bit and lsb of speed is not set
+	 * for the switch() below to work */
+	if ((spd & 1) || (dplx & ~1))
+		goto err_inval;
+
+	/* Fiber NIC's only allow 1000 Gbps Full duplex */
+	if ((adapter->hw.phy.media_type == e1000_media_type_internal_serdes) &&
+	    spd != SPEED_1000 &&
+	    dplx != DUPLEX_FULL)
+		goto err_inval;
+
+	switch (spd + dplx) {
+	case SPEED_10 + DUPLEX_HALF:
+		mac->forced_speed_duplex = ADVERTISE_10_HALF;
+		break;
+	case SPEED_10 + DUPLEX_FULL:
+		mac->forced_speed_duplex = ADVERTISE_10_FULL;
+		break;
+	case SPEED_100 + DUPLEX_HALF:
+		mac->forced_speed_duplex = ADVERTISE_100_HALF;
+		break;
+	case SPEED_100 + DUPLEX_FULL:
+		mac->forced_speed_duplex = ADVERTISE_100_FULL;
+		break;
+	case SPEED_1000 + DUPLEX_FULL:
+		mac->autoneg = 1;
+		adapter->hw.phy.autoneg_advertised = ADVERTISE_1000_FULL;
+		break;
+	case SPEED_1000 + DUPLEX_HALF: /* not supported */
+	default:
+		goto err_inval;
+	}
+	return 0;
+
+err_inval:
+	dev_err(&pdev->dev, "Unsupported Speed/Duplex configuration\n");
+	return -EINVAL;
+}
+
+static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	u32 ctrl, rctl, status;
+	u32 wufc = adapter->wol;
+#ifdef CONFIG_PM
+	int retval = 0;
+#endif
+
+	netif_device_detach(netdev);
+
+	if (netif_running(netdev))
+		igb_close(netdev);
+
+	igb_clear_interrupt_scheme(adapter);
+
+#ifdef CONFIG_PM
+	retval = pci_save_state(pdev);
+	if (retval)
+		return retval;
+#endif
+
+	status = rd32(E1000_STATUS);
+	if (status & E1000_STATUS_LU)
+		wufc &= ~E1000_WUFC_LNKC;
+
+	if (wufc) {
+		igb_setup_rctl(adapter);
+		igb_set_rx_mode(netdev);
+
+		/* turn on all-multi mode if wake on multicast is enabled */
+		if (wufc & E1000_WUFC_MC) {
+			rctl = rd32(E1000_RCTL);
+			rctl |= E1000_RCTL_MPE;
+			wr32(E1000_RCTL, rctl);
+		}
+
+		ctrl = rd32(E1000_CTRL);
+		/* advertise wake from D3Cold */
+		#define E1000_CTRL_ADVD3WUC 0x00100000
+		/* phy power management enable */
+		#define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
+		ctrl |= E1000_CTRL_ADVD3WUC;
+		wr32(E1000_CTRL, ctrl);
+
+		/* Allow time for pending master requests to run */
+		igb_disable_pcie_master(hw);
+
+		wr32(E1000_WUC, E1000_WUC_PME_EN);
+		wr32(E1000_WUFC, wufc);
+	} else {
+		wr32(E1000_WUC, 0);
+		wr32(E1000_WUFC, 0);
+	}
+
+	*enable_wake = wufc || adapter->en_mng_pt;
+	if (!*enable_wake)
+		igb_power_down_link(adapter);
+	else
+		igb_power_up_link(adapter);
+
+	/* Release control of h/w to f/w.  If f/w is AMT enabled, this
+	 * would have already happened in close and is redundant. */
+	igb_release_hw_control(adapter);
+
+	pci_disable_device(pdev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int igb_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	int retval;
+	bool wake;
+
+	retval = __igb_shutdown(pdev, &wake);
+	if (retval)
+		return retval;
+
+	if (wake) {
+		pci_prepare_to_sleep(pdev);
+	} else {
+		pci_wake_from_d3(pdev, false);
+		pci_set_power_state(pdev, PCI_D3hot);
+	}
+
+	return 0;
+}
+
+static int igb_resume(struct pci_dev *pdev)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	u32 err;
+
+	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
+	pci_save_state(pdev);
+
+	err = pci_enable_device_mem(pdev);
+	if (err) {
+		dev_err(&pdev->dev,
+			"igb: Cannot enable PCI device from suspend\n");
+		return err;
+	}
+	pci_set_master(pdev);
+
+	pci_enable_wake(pdev, PCI_D3hot, 0);
+	pci_enable_wake(pdev, PCI_D3cold, 0);
+
+	if (igb_init_interrupt_scheme(adapter)) {
+		dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
+		return -ENOMEM;
+	}
+
+	igb_reset(adapter);
+
+	/* let the f/w know that the h/w is now under the control of the
+	 * driver. */
+	igb_get_hw_control(adapter);
+
+	wr32(E1000_WUS, ~0);
+
+	if (netif_running(netdev)) {
+		err = igb_open(netdev);
+		if (err)
+			return err;
+	}
+
+	netif_device_attach(netdev);
+
+	return 0;
+}
+#endif
+
+static void igb_shutdown(struct pci_dev *pdev)
+{
+	bool wake;
+
+	__igb_shutdown(pdev, &wake);
+
+	if (system_state == SYSTEM_POWER_OFF) {
+		pci_wake_from_d3(pdev, wake);
+		pci_set_power_state(pdev, PCI_D3hot);
+	}
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+static void igb_netpoll(struct net_device *netdev)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	struct igb_q_vector *q_vector;
+	int i;
+
+	for (i = 0; i < adapter->num_q_vectors; i++) {
+		q_vector = adapter->q_vector[i];
+		if (adapter->msix_entries)
+			wr32(E1000_EIMC, q_vector->eims_value);
+		else
+			igb_irq_disable(adapter);
+		napi_schedule(&q_vector->napi);
+	}
+}
+#endif /* CONFIG_NET_POLL_CONTROLLER */
+
+/**
+ * igb_io_error_detected - called when PCI error is detected
+ * @pdev: Pointer to PCI device
+ * @state: The current pci connection state
+ *
+ * This function is called after a PCI bus error affecting
+ * this device has been detected.
+ */
+static pci_ers_result_t igb_io_error_detected(struct pci_dev *pdev,
+					      pci_channel_state_t state)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct igb_adapter *adapter = netdev_priv(netdev);
+
+	netif_device_detach(netdev);
+
+	if (state == pci_channel_io_perm_failure)
+		return PCI_ERS_RESULT_DISCONNECT;
+
+	if (netif_running(netdev))
+		igb_down(adapter);
+	pci_disable_device(pdev);
+
+	/* Request a slot slot reset. */
+	return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * igb_io_slot_reset - called after the pci bus has been reset.
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch, as if from a cold-boot. Implementation
+ * resembles the first-half of the igb_resume routine.
+ */
+static pci_ers_result_t igb_io_slot_reset(struct pci_dev *pdev)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	pci_ers_result_t result;
+	int err;
+
+	if (pci_enable_device_mem(pdev)) {
+		dev_err(&pdev->dev,
+			"Cannot re-enable PCI device after reset.\n");
+		result = PCI_ERS_RESULT_DISCONNECT;
+	} else {
+		pci_set_master(pdev);
+		pci_restore_state(pdev);
+		pci_save_state(pdev);
+
+		pci_enable_wake(pdev, PCI_D3hot, 0);
+		pci_enable_wake(pdev, PCI_D3cold, 0);
+
+		igb_reset(adapter);
+		wr32(E1000_WUS, ~0);
+		result = PCI_ERS_RESULT_RECOVERED;
+	}
+
+	err = pci_cleanup_aer_uncorrect_error_status(pdev);
+	if (err) {
+		dev_err(&pdev->dev, "pci_cleanup_aer_uncorrect_error_status "
+		        "failed 0x%0x\n", err);
+		/* non-fatal, continue */
+	}
+
+	return result;
+}
+
+/**
+ * igb_io_resume - called when traffic can start flowing again.
+ * @pdev: Pointer to PCI device
+ *
+ * This callback is called when the error recovery driver tells us that
+ * its OK to resume normal operation. Implementation resembles the
+ * second-half of the igb_resume routine.
+ */
+static void igb_io_resume(struct pci_dev *pdev)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct igb_adapter *adapter = netdev_priv(netdev);
+
+	if (netif_running(netdev)) {
+		if (igb_up(adapter)) {
+			dev_err(&pdev->dev, "igb_up failed after reset\n");
+			return;
+		}
+	}
+
+	netif_device_attach(netdev);
+
+	/* let the f/w know that the h/w is now under the control of the
+	 * driver. */
+	igb_get_hw_control(adapter);
+}
+
+static void igb_rar_set_qsel(struct igb_adapter *adapter, u8 *addr, u32 index,
+                             u8 qsel)
+{
+	u32 rar_low, rar_high;
+	struct e1000_hw *hw = &adapter->hw;
+
+	/* HW expects these in little endian so we reverse the byte order
+	 * from network order (big endian) to little endian
+	 */
+	rar_low = ((u32) addr[0] | ((u32) addr[1] << 8) |
+	          ((u32) addr[2] << 16) | ((u32) addr[3] << 24));
+	rar_high = ((u32) addr[4] | ((u32) addr[5] << 8));
+
+	/* Indicate to hardware the Address is Valid. */
+	rar_high |= E1000_RAH_AV;
+
+	if (hw->mac.type == e1000_82575)
+		rar_high |= E1000_RAH_POOL_1 * qsel;
+	else
+		rar_high |= E1000_RAH_POOL_1 << qsel;
+
+	wr32(E1000_RAL(index), rar_low);
+	wrfl();
+	wr32(E1000_RAH(index), rar_high);
+	wrfl();
+}
+
+static int igb_set_vf_mac(struct igb_adapter *adapter,
+                          int vf, unsigned char *mac_addr)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	/* VF MAC addresses start at end of receive addresses and moves
+	 * torwards the first, as a result a collision should not be possible */
+	int rar_entry = hw->mac.rar_entry_count - (vf + 1);
+
+	memcpy(adapter->vf_data[vf].vf_mac_addresses, mac_addr, ETH_ALEN);
+
+	igb_rar_set_qsel(adapter, mac_addr, rar_entry, vf);
+
+	return 0;
+}
+
+static int igb_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	if (!is_valid_ether_addr(mac) || (vf >= adapter->vfs_allocated_count))
+		return -EINVAL;
+	adapter->vf_data[vf].flags |= IGB_VF_FLAG_PF_SET_MAC;
+	dev_info(&adapter->pdev->dev, "setting MAC %pM on VF %d\n", mac, vf);
+	dev_info(&adapter->pdev->dev, "Reload the VF driver to make this"
+				      " change effective.");
+	if (test_bit(__IGB_DOWN, &adapter->state)) {
+		dev_warn(&adapter->pdev->dev, "The VF MAC address has been set,"
+			 " but the PF device is not up.\n");
+		dev_warn(&adapter->pdev->dev, "Bring the PF device up before"
+			 " attempting to use the VF device.\n");
+	}
+	return igb_set_vf_mac(adapter, vf, mac);
+}
+
+static int igb_link_mbps(int internal_link_speed)
+{
+	switch (internal_link_speed) {
+	case SPEED_100:
+		return 100;
+	case SPEED_1000:
+		return 1000;
+	default:
+		return 0;
+	}
+}
+
+static void igb_set_vf_rate_limit(struct e1000_hw *hw, int vf, int tx_rate,
+				  int link_speed)
+{
+	int rf_dec, rf_int;
+	u32 bcnrc_val;
+
+	if (tx_rate != 0) {
+		/* Calculate the rate factor values to set */
+		rf_int = link_speed / tx_rate;
+		rf_dec = (link_speed - (rf_int * tx_rate));
+		rf_dec = (rf_dec * (1<<E1000_RTTBCNRC_RF_INT_SHIFT)) / tx_rate;
+
+		bcnrc_val = E1000_RTTBCNRC_RS_ENA;
+		bcnrc_val |= ((rf_int<<E1000_RTTBCNRC_RF_INT_SHIFT) &
+		               E1000_RTTBCNRC_RF_INT_MASK);
+		bcnrc_val |= (rf_dec & E1000_RTTBCNRC_RF_DEC_MASK);
+	} else {
+		bcnrc_val = 0;
+	}
+
+	wr32(E1000_RTTDQSEL, vf); /* vf X uses queue X */
+	wr32(E1000_RTTBCNRC, bcnrc_val);
+}
+
+static void igb_check_vf_rate_limit(struct igb_adapter *adapter)
+{
+	int actual_link_speed, i;
+	bool reset_rate = false;
+
+	/* VF TX rate limit was not set or not supported */
+	if ((adapter->vf_rate_link_speed == 0) ||
+	    (adapter->hw.mac.type != e1000_82576))
+		return;
+
+	actual_link_speed = igb_link_mbps(adapter->link_speed);
+	if (actual_link_speed != adapter->vf_rate_link_speed) {
+		reset_rate = true;
+		adapter->vf_rate_link_speed = 0;
+		dev_info(&adapter->pdev->dev,
+		         "Link speed has been changed. VF Transmit "
+		         "rate is disabled\n");
+	}
+
+	for (i = 0; i < adapter->vfs_allocated_count; i++) {
+		if (reset_rate)
+			adapter->vf_data[i].tx_rate = 0;
+
+		igb_set_vf_rate_limit(&adapter->hw, i,
+		                      adapter->vf_data[i].tx_rate,
+		                      actual_link_speed);
+	}
+}
+
+static int igb_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	int actual_link_speed;
+
+	if (hw->mac.type != e1000_82576)
+		return -EOPNOTSUPP;
+
+	actual_link_speed = igb_link_mbps(adapter->link_speed);
+	if ((vf >= adapter->vfs_allocated_count) ||
+	    (!(rd32(E1000_STATUS) & E1000_STATUS_LU)) ||
+	    (tx_rate < 0) || (tx_rate > actual_link_speed))
+		return -EINVAL;
+
+	adapter->vf_rate_link_speed = actual_link_speed;
+	adapter->vf_data[vf].tx_rate = (u16)tx_rate;
+	igb_set_vf_rate_limit(hw, vf, tx_rate, actual_link_speed);
+
+	return 0;
+}
+
+static int igb_ndo_get_vf_config(struct net_device *netdev,
+				 int vf, struct ifla_vf_info *ivi)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	if (vf >= adapter->vfs_allocated_count)
+		return -EINVAL;
+	ivi->vf = vf;
+	memcpy(&ivi->mac, adapter->vf_data[vf].vf_mac_addresses, ETH_ALEN);
+	ivi->tx_rate = adapter->vf_data[vf].tx_rate;
+	ivi->vlan = adapter->vf_data[vf].pf_vlan;
+	ivi->qos = adapter->vf_data[vf].pf_qos;
+	return 0;
+}
+
+static void igb_vmm_control(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 reg;
+
+	switch (hw->mac.type) {
+	case e1000_82575:
+	default:
+		/* replication is not supported for 82575 */
+		return;
+	case e1000_82576:
+		/* notify HW that the MAC is adding vlan tags */
+		reg = rd32(E1000_DTXCTL);
+		reg |= E1000_DTXCTL_VLAN_ADDED;
+		wr32(E1000_DTXCTL, reg);
+	case e1000_82580:
+		/* enable replication vlan tag stripping */
+		reg = rd32(E1000_RPLOLR);
+		reg |= E1000_RPLOLR_STRVLAN;
+		wr32(E1000_RPLOLR, reg);
+	case e1000_i350:
+		/* none of the above registers are supported by i350 */
+		break;
+	}
+
+	if (adapter->vfs_allocated_count) {
+		igb_vmdq_set_loopback_pf(hw, true);
+		igb_vmdq_set_replication_pf(hw, true);
+		igb_vmdq_set_anti_spoofing_pf(hw, true,
+						adapter->vfs_allocated_count);
+	} else {
+		igb_vmdq_set_loopback_pf(hw, false);
+		igb_vmdq_set_replication_pf(hw, false);
+	}
+}
+
+static void igb_init_dmac(struct igb_adapter *adapter, u32 pba)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 dmac_thr;
+	u16 hwm;
+
+	if (hw->mac.type > e1000_82580) {
+		if (adapter->flags & IGB_FLAG_DMAC) {
+			u32 reg;
+
+			/* force threshold to 0. */
+			wr32(E1000_DMCTXTH, 0);
+
+			/*
+			 * DMA Coalescing high water mark needs to be higher
+			 * than the RX threshold. set hwm to PBA -  2 * max
+			 * frame size
+			 */
+			hwm = pba - (2 * adapter->max_frame_size);
+			reg = rd32(E1000_DMACR);
+			reg &= ~E1000_DMACR_DMACTHR_MASK;
+			dmac_thr = pba - 4;
+
+			reg |= ((dmac_thr << E1000_DMACR_DMACTHR_SHIFT)
+				& E1000_DMACR_DMACTHR_MASK);
+
+			/* transition to L0x or L1 if available..*/
+			reg |= (E1000_DMACR_DMAC_EN | E1000_DMACR_DMAC_LX_MASK);
+
+			/* watchdog timer= +-1000 usec in 32usec intervals */
+			reg |= (1000 >> 5);
+			wr32(E1000_DMACR, reg);
+
+			/*
+			 * no lower threshold to disable
+			 * coalescing(smart fifb)-UTRESH=0
+			 */
+			wr32(E1000_DMCRTRH, 0);
+			wr32(E1000_FCRTC, hwm);
+
+			reg = (IGB_DMCTLX_DCFLUSH_DIS | 0x4);
+
+			wr32(E1000_DMCTLX, reg);
+
+			/*
+			 * free space in tx packet buffer to wake from
+			 * DMA coal
+			 */
+			wr32(E1000_DMCTXTH, (IGB_MIN_TXPBSIZE -
+			     (IGB_TX_BUF_4096 + adapter->max_frame_size)) >> 6);
+
+			/*
+			 * make low power state decision controlled
+			 * by DMA coal
+			 */
+			reg = rd32(E1000_PCIEMISC);
+			reg &= ~E1000_PCIEMISC_LX_DECISION;
+			wr32(E1000_PCIEMISC, reg);
+		} /* endif adapter->dmac is not disabled */
+	} else if (hw->mac.type == e1000_82580) {
+		u32 reg = rd32(E1000_PCIEMISC);
+		wr32(E1000_PCIEMISC, reg & ~E1000_PCIEMISC_LX_DECISION);
+		wr32(E1000_DMACR, 0);
+	}
+}
+
+/* igb_main.c */