e1000e: cleanup: rename e1000e_id_led_init() and call as function pointer

Rename e1000e_id_led_init() to e1000e_id_led_init_generic() to signify the
function is used for more than one MAC-family type.  For the ich8lan MAC
family, some MACs use the generic function and others use the function
e1000_id_led_init_pchlan().  In all cases where e1000e_id_led_init() was
called directly, change to call the function pointer to be consistent with
the driver design.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

5 files changed, 9 insertions, 10 deletions

diff --git a/drivers/net/ethernet/intel/e1000e/80003es2lan.c b/drivers/net/ethernet/intel/e1000e/80003es2lan.c
index 1f8f8524d86..c1464845439 100644
--- a/drivers/net/ethernet/intel/e1000e/80003es2lan.c
+++ b/drivers/net/ethernet/intel/e1000e/80003es2lan.c
@@ -820,7 +820,7 @@ static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw)
 	e1000_initialize_hw_bits_80003es2lan(hw);
 
 	/* Initialize identification LED */
-	ret_val = e1000e_id_led_init(hw);
+	ret_val = mac->ops.id_led_init(hw);
 	if (ret_val)
 		e_dbg("Error initializing identification LED\n");
 		/* This is not fatal and we should not stop init due to this */
@@ -1413,7 +1413,7 @@ static void e1000_clear_hw_cntrs_80003es2lan(struct e1000_hw *hw)
 
 static const struct e1000_mac_operations es2_mac_ops = {
 	.read_mac_addr		= e1000_read_mac_addr_80003es2lan,
-	.id_led_init		= e1000e_id_led_init,
+	.id_led_init		= e1000e_id_led_init_generic,
 	.blink_led		= e1000e_blink_led_generic,
 	.check_mng_mode		= e1000e_check_mng_mode_generic,
 	/* check_for_link dependent on media type */
diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c
index b6b7bc4c33a..2ca6377bd01 100644
--- a/drivers/net/ethernet/intel/e1000e/82571.c
+++ b/drivers/net/ethernet/intel/e1000e/82571.c
@@ -1118,7 +1118,7 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw)
 	e1000_initialize_hw_bits_82571(hw);
 
 	/* Initialize identification LED */
-	ret_val = e1000e_id_led_init(hw);
+	ret_val = mac->ops.id_led_init(hw);
 	if (ret_val)
 		e_dbg("Error initializing identification LED\n");
 		/* This is not fatal and we should not stop init due to this */
@@ -1911,7 +1911,7 @@ static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw)
 static const struct e1000_mac_operations e82571_mac_ops = {
 	/* .check_mng_mode: mac type dependent */
 	/* .check_for_link: media type dependent */
-	.id_led_init		= e1000e_id_led_init,
+	.id_led_init		= e1000e_id_led_init_generic,
 	.cleanup_led		= e1000e_cleanup_led_generic,
 	.clear_hw_cntrs		= e1000_clear_hw_cntrs_82571,
 	.get_bus_info		= e1000e_get_bus_info_pcie,
diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h
index 04a21fcb827..2a0d658b596 100644
--- a/drivers/net/ethernet/intel/e1000e/e1000.h
+++ b/drivers/net/ethernet/intel/e1000e/e1000.h
@@ -559,7 +559,7 @@ extern s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u
 extern s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw, u16 *speed, u16 *duplex);
 extern s32 e1000e_disable_pcie_master(struct e1000_hw *hw);
 extern s32 e1000e_get_auto_rd_done(struct e1000_hw *hw);
-extern s32 e1000e_id_led_init(struct e1000_hw *hw);
+extern s32 e1000e_id_led_init_generic(struct e1000_hw *hw);
 extern void e1000e_clear_hw_cntrs_base(struct e1000_hw *hw);
 extern s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw);
 extern s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw);
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index f3282dc5588..7d3a7fb11dd 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -580,7 +580,7 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw)
 		/* check management mode */
 		mac->ops.check_mng_mode = e1000_check_mng_mode_ich8lan;
 		/* ID LED init */
-		mac->ops.id_led_init = e1000e_id_led_init;
+		mac->ops.id_led_init = e1000e_id_led_init_generic;
 		/* blink LED */
 		mac->ops.blink_led = e1000e_blink_led_generic;
 		/* setup LED */
@@ -2962,7 +2962,7 @@ static s32 e1000_valid_led_default_ich8lan(struct e1000_hw *hw, u16 *data)
  *
  *  PCH also does not have an "always on" or "always off" mode which
  *  complicates the ID feature.  Instead of using the "on" mode to indicate
- *  in ledctl_mode2 the LEDs to use for ID (see e1000e_id_led_init()),
+ *  in ledctl_mode2 the LEDs to use for ID (see e1000e_id_led_init_generic()),
  *  use "link_up" mode.  The LEDs will still ID on request if there is no
  *  link based on logic in e1000_led_[on|off]_pchlan().
  **/
@@ -4006,7 +4006,6 @@ release:
 }
 
 static const struct e1000_mac_operations ich8_mac_ops = {
-	.id_led_init		= e1000e_id_led_init,
 	/* check_mng_mode dependent on mac type */
 	.check_for_link		= e1000_check_for_copper_link_ich8lan,
 	/* cleanup_led dependent on mac type */
diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c
index 17991e63083..aaf4a4d731b 100644
--- a/drivers/net/ethernet/intel/e1000e/mac.c
+++ b/drivers/net/ethernet/intel/e1000e/mac.c
@@ -1399,11 +1399,11 @@ s32 e1000e_valid_led_default(struct e1000_hw *hw, u16 *data)
 }
 
 /**
- *  e1000e_id_led_init -
+ *  e1000e_id_led_init_generic -
  *  @hw: pointer to the HW structure
  *
  **/
-s32 e1000e_id_led_init(struct e1000_hw *hw)
+s32 e1000e_id_led_init_generic(struct e1000_hw *hw)
 {
 	struct e1000_mac_info *mac = &hw->mac;
 	s32 ret_val;