Merge tag 'drm-intel-fixes-2013-11-07' of git://people.freedesktop.org/~danvet/drm-intel into drm-next

Bit a bit -fixes pull request in the merge window than usual dua to two
feauture-y things:
- Display CRCs are now enabled on all platforms, including the odd DP case
  on gm45/vlv. Since this is a testing-only feature it should ever hurt,
  but I figured it'll help with regression-testing -fixes. So I left it
  in and didn't postpone it to 3.14.
- Display power well refactoring from Imre. Would have caused major pain
  conflict with the bdw stage 1 patches if I'd postpone this to -next.
  It's only an relatively small interface rework, so shouldn't cause pain.
  It's also been in my tree since almost 3 weeks already.

That accounts for about two thirds of the pull, otherwise just bugfixes:
- vlv backlight fix from Jesse/Jani
- vlv vblank timestamp fix from Jesse
- improved edp detection through vbt from Ville (fixes a vlv issue)
- eDP vdd fix from Paulo
- fixes for dvo lvds on i830M
- a few smaller things all over

Note: This contains a backmerge of v3.12. Since the -internal branch
always applied on top of -nightly I need that unified base to merge bdw
patches. So you'll get a conflict with radeon connector props when pulling
this (and nouveau/master will also conflict a bit when Ben doesn't
rebase). The backmerge itself only had conflicts in drm/i915.

There's also a tiny conflict between Jani's backlight fix and your sysfs
lifetime fix in drm-next.

* tag 'drm-intel-fixes-2013-11-07' of git://people.freedesktop.org/~danvet/drm-intel: (940 commits)
  drm/i915/vlv: use per-pipe backlight controls v2
  drm/i915: make backlight functions take a connector
  drm/i915: move opregion asle request handling to a work queue
  drm/i915/vlv: use PIPE_START_VBLANK interrupts on VLV
  drm/i915: Make intel_dp_is_edp() less specific
  drm/i915: Give names to the VBT child device type bits
  drm/i915/vlv: enable HDA display audio for Valleyview2
  drm/i915/dvo: call ->mode_set callback only when the port is running
  drm/i915: avoid unclaimed registers when capturing the error state
  drm/i915: Enable DP port CRC for the "auto" source on g4x/vlv
  drm/i915: scramble reset support for DP port CRC on vlv
  drm/i915: scramble reset support for DP port CRC on g4x
  drm/i916: add "auto" pipe CRC source
  ...

Conflicts:
	MAINTAINERS
	drivers/gpu/drm/i915/intel_panel.c
	drivers/gpu/drm/nouveau/core/subdev/mc/base.c
	drivers/gpu/drm/radeon/atombios_encoders.c
	drivers/gpu/drm/radeon/radeon_connectors.c

1 files changed, 22 insertions, 6 deletions

diff --git a/drivers/net/ethernet/sfc/mcdi.c b/drivers/net/ethernet/sfc/mcdi.c
index 128d7cdf9eb..366c8e3e378 100644
--- a/drivers/net/ethernet/sfc/mcdi.c
+++ b/drivers/net/ethernet/sfc/mcdi.c
@@ -27,10 +27,10 @@
 
 /* A reboot/assertion causes the MCDI status word to be set after the
  * command word is set or a REBOOT event is sent. If we notice a reboot
- * via these mechanisms then wait 20ms for the status word to be set.
+ * via these mechanisms then wait 250ms for the status word to be set.
  */
 #define MCDI_STATUS_DELAY_US		100
-#define MCDI_STATUS_DELAY_COUNT		200
+#define MCDI_STATUS_DELAY_COUNT		2500
 #define MCDI_STATUS_SLEEP_MS						\
 	(MCDI_STATUS_DELAY_US * MCDI_STATUS_DELAY_COUNT / 1000)
 
@@ -800,9 +800,6 @@ static void efx_mcdi_ev_death(struct efx_nic *efx, int rc)
 	} else {
 		int count;
 
-		/* Nobody was waiting for an MCDI request, so trigger a reset */
-		efx_schedule_reset(efx, RESET_TYPE_MC_FAILURE);
-
 		/* Consume the status word since efx_mcdi_rpc_finish() won't */
 		for (count = 0; count < MCDI_STATUS_DELAY_COUNT; ++count) {
 			if (efx_mcdi_poll_reboot(efx))
@@ -810,6 +807,9 @@ static void efx_mcdi_ev_death(struct efx_nic *efx, int rc)
 			udelay(MCDI_STATUS_DELAY_US);
 		}
 		mcdi->new_epoch = true;
+
+		/* Nobody was waiting for an MCDI request, so trigger a reset */
+		efx_schedule_reset(efx, RESET_TYPE_MC_FAILURE);
 	}
 
 	spin_unlock(&mcdi->iface_lock);
@@ -963,7 +963,7 @@ static int efx_mcdi_drv_attach(struct efx_nic *efx, bool driver_operating,
 			       bool *was_attached)
 {
 	MCDI_DECLARE_BUF(inbuf, MC_CMD_DRV_ATTACH_IN_LEN);
-	MCDI_DECLARE_BUF(outbuf, MC_CMD_DRV_ATTACH_OUT_LEN);
+	MCDI_DECLARE_BUF(outbuf, MC_CMD_DRV_ATTACH_EXT_OUT_LEN);
 	size_t outlen;
 	int rc;
 
@@ -981,6 +981,22 @@ static int efx_mcdi_drv_attach(struct efx_nic *efx, bool driver_operating,
 		goto fail;
 	}
 
+	/* We currently assume we have control of the external link
+	 * and are completely trusted by firmware.  Abort probing
+	 * if that's not true for this function.
+	 */
+	if (driver_operating &&
+	    outlen >= MC_CMD_DRV_ATTACH_EXT_OUT_LEN &&
+	    (MCDI_DWORD(outbuf, DRV_ATTACH_EXT_OUT_FUNC_FLAGS) &
+	     (1 << MC_CMD_DRV_ATTACH_EXT_OUT_FLAG_LINKCTRL |
+	      1 << MC_CMD_DRV_ATTACH_EXT_OUT_FLAG_TRUSTED)) !=
+	    (1 << MC_CMD_DRV_ATTACH_EXT_OUT_FLAG_LINKCTRL |
+	     1 << MC_CMD_DRV_ATTACH_EXT_OUT_FLAG_TRUSTED)) {
+		netif_err(efx, probe, efx->net_dev,
+			  "This driver version only supports one function per port\n");
+		return -ENODEV;
+	}
+
 	if (was_attached != NULL)
 		*was_attached = MCDI_DWORD(outbuf, DRV_ATTACH_OUT_OLD_STATE);
 	return 0;