Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights:

   1) Steady transitioning of the BPF instructure to a generic spot so
      all kernel subsystems can make use of it, from Alexei Starovoitov.

   2) SFC driver supports busy polling, from Alexandre Rames.

   3) Take advantage of hash table in UDP multicast delivery, from David
      Held.

   4) Lighten locking, in particular by getting rid of the LRU lists, in
      inet frag handling.  From Florian Westphal.

   5) Add support for various RFC6458 control messages in SCTP, from
      Geir Ola Vaagland.

   6) Allow to filter bridge forwarding database dumps by device, from
      Jamal Hadi Salim.

   7) virtio-net also now supports busy polling, from Jason Wang.

   8) Some low level optimization tweaks in pktgen from Jesper Dangaard
      Brouer.

   9) Add support for ipv6 address generation modes, so that userland
      can have some input into the process.  From Jiri Pirko.

  10) Consolidate common TCP connection request code in ipv4 and ipv6,
      from Octavian Purdila.

  11) New ARP packet logger in netfilter, from Pablo Neira Ayuso.

  12) Generic resizable RCU hash table, with intial users in netlink and
      nftables.  From Thomas Graf.

  13) Maintain a name assignment type so that userspace can see where a
      network device name came from (enumerated by kernel, assigned
      explicitly by userspace, etc.) From Tom Gundersen.

  14) Automatic flow label generation on transmit in ipv6, from Tom
      Herbert.

  15) New packet timestamping facilities from Willem de Bruijn, meant to
      assist in measuring latencies going into/out-of the packet
      scheduler, latency from TCP data transmission to ACK, etc"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1536 commits)
  cxgb4 : Disable recursive mailbox commands when enabling vi
  net: reduce USB network driver config options.
  tg3: Modify tg3_tso_bug() to handle multiple TX rings
  amd-xgbe: Perform phy connect/disconnect at dev open/stop
  amd-xgbe: Use dma_set_mask_and_coherent to set DMA mask
  net: sun4i-emac: fix memory leak on bad packet
  sctp: fix possible seqlock seadlock in sctp_packet_transmit()
  Revert "net: phy: Set the driver when registering an MDIO bus device"
  cxgb4vf: Turn off SGE RX/TX Callback Timers and interrupts in PCI shutdown routine
  team: Simplify return path of team_newlink
  bridge: Update outdated comment on promiscuous mode
  net-timestamp: ACK timestamp for bytestreams
  net-timestamp: TCP timestamping
  net-timestamp: SCHED timestamp on entering packet scheduler
  net-timestamp: add key to disambiguate concurrent datagrams
  net-timestamp: move timestamp flags out of sk_flags
  net-timestamp: extend SCM_TIMESTAMPING ancillary data struct
  cxgb4i : Move stray CPL definitions to cxgb4 driver
  tcp: reduce spurious retransmits due to transient SACK reneging
  qlcnic: Initialize dcbnl_ops before register_netdev
  ...

1 files changed, 69 insertions, 0 deletions

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
index fd8a217556a..ec632e666c5 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
@@ -20,7 +20,9 @@
 #include <linux/of_net.h>
 #include <linux/phy.h>
 #include <linux/regmap.h>
+#include <linux/reset.h>
 #include <linux/stmmac.h>
+#include "stmmac.h"
 
 #define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII 0x0
 #define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII 0x1
@@ -34,6 +36,7 @@ struct socfpga_dwmac {
 	u32	reg_shift;
 	struct	device *dev;
 	struct regmap *sys_mgr_base_addr;
+	struct reset_control *stmmac_rst;
 };
 
 static int socfpga_dwmac_parse_data(struct socfpga_dwmac *dwmac, struct device *dev)
@@ -43,6 +46,13 @@ static int socfpga_dwmac_parse_data(struct socfpga_dwmac *dwmac, struct device *
 	u32 reg_offset, reg_shift;
 	int ret;
 
+	dwmac->stmmac_rst = devm_reset_control_get(dev,
+						  STMMAC_RESOURCE_NAME);
+	if (IS_ERR(dwmac->stmmac_rst)) {
+		dev_info(dev, "Could not get reset control!\n");
+		return -EINVAL;
+	}
+
 	dwmac->interface = of_get_phy_mode(np);
 
 	sys_mgr_base_addr = syscon_regmap_lookup_by_phandle(np, "altr,sysmgr-syscon");
@@ -125,6 +135,65 @@ static void *socfpga_dwmac_probe(struct platform_device *pdev)
 	return dwmac;
 }
 
+static void socfpga_dwmac_exit(struct platform_device *pdev, void *priv)
+{
+	struct socfpga_dwmac	*dwmac = priv;
+
+	/* On socfpga platform exit, assert and hold reset to the
+	 * enet controller - the default state after a hard reset.
+	 */
+	if (dwmac->stmmac_rst)
+		reset_control_assert(dwmac->stmmac_rst);
+}
+
+static int socfpga_dwmac_init(struct platform_device *pdev, void *priv)
+{
+	struct socfpga_dwmac	*dwmac = priv;
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct stmmac_priv *stpriv = NULL;
+	int ret = 0;
+
+	if (ndev)
+		stpriv = netdev_priv(ndev);
+
+	/* Assert reset to the enet controller before changing the phy mode */
+	if (dwmac->stmmac_rst)
+		reset_control_assert(dwmac->stmmac_rst);
+
+	/* Setup the phy mode in the system manager registers according to
+	 * devicetree configuration
+	 */
+	ret = socfpga_dwmac_setup(dwmac);
+
+	/* Deassert reset for the phy configuration to be sampled by
+	 * the enet controller, and operation to start in requested mode
+	 */
+	if (dwmac->stmmac_rst)
+		reset_control_deassert(dwmac->stmmac_rst);
+
+	/* Before the enet controller is suspended, the phy is suspended.
+	 * This causes the phy clock to be gated. The enet controller is
+	 * resumed before the phy, so the clock is still gated "off" when
+	 * the enet controller is resumed. This code makes sure the phy
+	 * is "resumed" before reinitializing the enet controller since
+	 * the enet controller depends on an active phy clock to complete
+	 * a DMA reset. A DMA reset will "time out" if executed
+	 * with no phy clock input on the Synopsys enet controller.
+	 * Verified through Synopsys Case #8000711656.
+	 *
+	 * Note that the phy clock is also gated when the phy is isolated.
+	 * Phy "suspend" and "isolate" controls are located in phy basic
+	 * control register 0, and can be modified by the phy driver
+	 * framework.
+	 */
+	if (stpriv && stpriv->phydev)
+		phy_resume(stpriv->phydev);
+
+	return ret;
+}
+
 const struct stmmac_of_data socfpga_gmac_data = {
 	.setup = socfpga_dwmac_probe,
+	.init = socfpga_dwmac_init,
+	.exit = socfpga_dwmac_exit,
 };