Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1745 commits)
  dp83640: free packet queues on remove
  dp83640: use proper function to free transmit time stamping packets
  ipv6: Do not use routes from locally generated RAs
  |PATCH net-next] tg3: add tx_dropped counter
  be2net: don't create multiple RX/TX rings in multi channel mode
  be2net: don't create multiple TXQs in BE2
  be2net: refactor VF setup/teardown code into be_vf_setup/clear()
  be2net: add vlan/rx-mode/flow-control config to be_setup()
  net_sched: cls_flow: use skb_header_pointer()
  ipv4: avoid useless call of the function check_peer_pmtu
  TCP: remove TCP_DEBUG
  net: Fix driver name for mdio-gpio.c
  ipv4: tcp: fix TOS value in ACK messages sent from TIME_WAIT
  rtnetlink: Add missing manual netlink notification in dev_change_net_namespaces
  ipv4: fix ipsec forward performance regression
  jme: fix irq storm after suspend/resume
  route: fix ICMP redirect validation
  net: hold sock reference while processing tx timestamps
  tcp: md5: add more const attributes
  Add ethtool -g support to virtio_net
  ...

Fix up conflicts in:
 - drivers/net/Kconfig:
	The split-up generated a trivial conflict with removal of a
	stale reference to Documentation/networking/net-modules.txt.
	Remove it from the new location instead.
 - fs/sysfs/dir.c:
	Fairly nasty conflicts with the sysfs rb-tree usage, conflicting
	with Eric Biederman's changes for tagged directories.

1 files changed, 136 insertions, 0 deletions

diff --git a/drivers/net/ethernet/xscale/ixp2000/caleb.c b/drivers/net/ethernet/xscale/ixp2000/caleb.c
new file mode 100644
index 00000000000..7dea5b95012
--- /dev/null
+++ b/drivers/net/ethernet/xscale/ixp2000/caleb.c
@@ -0,0 +1,136 @@
+/*
+ * Helper functions for the SPI-3 bridge FPGA on the Radisys ENP2611
+ * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Dedicated to Marija Kulikova.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include "caleb.h"
+
+#define CALEB_IDLO		0x00
+#define CALEB_IDHI		0x01
+#define CALEB_RID		0x02
+#define CALEB_RESET		0x03
+#define CALEB_INTREN0		0x04
+#define CALEB_INTREN1		0x05
+#define CALEB_INTRSTAT0		0x06
+#define CALEB_INTRSTAT1		0x07
+#define CALEB_PORTEN		0x08
+#define CALEB_BURST		0x09
+#define CALEB_PORTPAUS		0x0A
+#define CALEB_PORTPAUSD		0x0B
+#define CALEB_PHY0RX		0x10
+#define CALEB_PHY1RX		0x11
+#define CALEB_PHY0TX		0x12
+#define CALEB_PHY1TX		0x13
+#define CALEB_IXPRX_HI_CNTR	0x15
+#define CALEB_PHY0RX_HI_CNTR	0x16
+#define CALEB_PHY1RX_HI_CNTR	0x17
+#define CALEB_IXPRX_CNTR	0x18
+#define CALEB_PHY0RX_CNTR	0x19
+#define CALEB_PHY1RX_CNTR	0x1A
+#define CALEB_IXPTX_CNTR	0x1B
+#define CALEB_PHY0TX_CNTR	0x1C
+#define CALEB_PHY1TX_CNTR	0x1D
+#define CALEB_DEBUG0		0x1E
+#define CALEB_DEBUG1		0x1F
+
+
+static u8 caleb_reg_read(int reg)
+{
+	u8 value;
+
+	value = *((volatile u8 *)(ENP2611_CALEB_VIRT_BASE + reg));
+
+//	printk(KERN_INFO "caleb_reg_read(%d) = %.2x\n", reg, value);
+
+	return value;
+}
+
+static void caleb_reg_write(int reg, u8 value)
+{
+	u8 dummy;
+
+//	printk(KERN_INFO "caleb_reg_write(%d, %.2x)\n", reg, value);
+
+	*((volatile u8 *)(ENP2611_CALEB_VIRT_BASE + reg)) = value;
+
+	dummy = *((volatile u8 *)ENP2611_CALEB_VIRT_BASE);
+	__asm__ __volatile__("mov %0, %0" : "+r" (dummy));
+}
+
+
+void caleb_reset(void)
+{
+	/*
+	 * Perform a chip reset.
+	 */
+	caleb_reg_write(CALEB_RESET, 0x02);
+	udelay(1);
+
+	/*
+	 * Enable all interrupt sources.  This is needed to get
+	 * meaningful results out of the status bits (register 6
+	 * and 7.)
+	 */
+	caleb_reg_write(CALEB_INTREN0, 0xff);
+	caleb_reg_write(CALEB_INTREN1, 0x07);
+
+	/*
+	 * Set RX and TX FIFO thresholds to 1.5kb.
+	 */
+	caleb_reg_write(CALEB_PHY0RX, 0x11);
+	caleb_reg_write(CALEB_PHY1RX, 0x11);
+	caleb_reg_write(CALEB_PHY0TX, 0x11);
+	caleb_reg_write(CALEB_PHY1TX, 0x11);
+
+	/*
+	 * Program SPI-3 burst size.
+	 */
+	caleb_reg_write(CALEB_BURST, 0);	// 64-byte RBUF mpackets
+//	caleb_reg_write(CALEB_BURST, 1);	// 128-byte RBUF mpackets
+//	caleb_reg_write(CALEB_BURST, 2);	// 256-byte RBUF mpackets
+}
+
+void caleb_enable_rx(int port)
+{
+	u8 temp;
+
+	temp = caleb_reg_read(CALEB_PORTEN);
+	temp |= 1 << port;
+	caleb_reg_write(CALEB_PORTEN, temp);
+}
+
+void caleb_disable_rx(int port)
+{
+	u8 temp;
+
+	temp = caleb_reg_read(CALEB_PORTEN);
+	temp &= ~(1 << port);
+	caleb_reg_write(CALEB_PORTEN, temp);
+}
+
+void caleb_enable_tx(int port)
+{
+	u8 temp;
+
+	temp = caleb_reg_read(CALEB_PORTEN);
+	temp |= 1 << (port + 4);
+	caleb_reg_write(CALEB_PORTEN, temp);
+}
+
+void caleb_disable_tx(int port)
+{
+	u8 temp;
+
+	temp = caleb_reg_read(CALEB_PORTEN);
+	temp &= ~(1 << (port + 4));
+	caleb_reg_write(CALEB_PORTEN, temp);
+}