Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking changes from David Miller:

 1) Get rid of the error prone NLA_PUT*() macros that used an embedded
    goto.

 2) Kill off the token-ring and MCA networking drivers, from Paul
    Gortmaker.

 3) Reduce high-order allocations made by datagram AF_UNIX sockets, from
    Eric Dumazet.

 4) Add PTP hardware clock support to IGB and IXGBE, from Richard
    Cochran and Jacob Keller.

 5) Allow users to query timestamping capabilities of a card via
    ethtool, from Richard Cochran.

 6) Add loadbalance mode to the teaming driver, from Jiri Pirko.  Part
    of this is that we can now have BPF filters not attached to sockets,
    and the loadbalancing function is calculated using one.

 7) Francois Romieu went through the network drivers removing gratuitous
    uses of netdev->base_addr, perhaps some day we can remove it
    completely but it's used for ISA probing still.

 8) Add a BPF JIT for sparc.  I know, who cares, right? :-)

 9) Move networking sysctl registry away from using the compatability
    mode interfaces in the sysctl code.  From Eric W Biederman.

10) Pavel Emelyanov added a way to save and restore TCP socket state via
    TCP_REPAIR, TCP_REPAIR_QUEUE, and TCP_QUEUE_SEQ socket options as
    well as a way to forcefully bind a socket to a port via the
    sk->sk_reuse value SK_FORCE_REUSE.  There is also a
    TCP_REPAIR_OPTIONS which allows to reinstante the TCP options
    enabled on the connection.

11) Several enhancements from Eric Dumazet that, in particular, can
    enhance splice performance on TCP sockets significantly.

     a) Reset the offset of the per-socket sendmsg page when we know
        we're the only use of the page in linear_to_page().

     b) Add facilities such that skb->data can be backed a page rather
        than SLAB kmalloc'd memory.  In particular devices which were
        receiving into linear RX buffers can now end up providing paged
        data.

    The big result is that code like splice and GRO do not have to copy
    any more.

12) Allow a pure sender to more gracefully handle ACK backlogs in TCP.
    What can happen at high rates is that the sender hasn't grown his
    receive buffer limits at all (he's not receiving data so really
    doesn't need to), but the non-data ACKs consume receive buffer
    space.

    sk_add_backlog() is too aggressive in dropping frames in this case,
    so relax it's requirements by using the receive buffer plus the send
    buffer limit as the backlog limit instead of just the former.

    Also from Eric Dumazet.

13) Add ipv6 support to L2TP, from Benjamin LaHaise, James Chapman, and
    Chris Elston.

14) Implement TCP early retransmit (RFC 5827), from Yuchung Cheng.
    Basically, we can start fast retransmit before hiting the dupack
    threshold under certain conditions.

15) New CODEL active queue management packet scheduler, from Eric
    Dumazet based upon initial work by Dave Taht.

    Basically, the big feature is that packets are dropped (or ECN bits
    are set) based upon how long packets live in the queue, rather than
    the queue length (which is what RED uses).

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1341 commits)
  drivers/net/stmmac: seq_file fix memory leak
  ipv6/exthdrs: strict Pad1 and PadN check
  USB: qmi_wwan: Add ZTE (Vodafone) K3520-Z
  USB: qmi_wwan: Add ZTE (Vodafone) K3765-Z
  USB: qmi_wwan: Make forced int 4 whitelist generic
  net/ipv4: replace simple_strtoul with kstrtoul
  net/ipv4/ipconfig: neaten __setup placement
  net: qmi_wwan: Add Vodafone/Huawei K5005 support
  net: cdc_ether: Add ZTE WWAN matches before generic Ethernet
  ipv6: use skb coalescing in reassembly
  ipv4: use skb coalescing in defragmentation
  net: introduce skb_try_coalesce()
  net:ipv6:fixed space issues relating to operators.
  net:ipv6:fixed a trailing white space issue.
  ipv6: disable GSO on sockets hitting dst_allfrag
  tg3: use netdev_alloc_frag() API
  net: napi_frags_skb() is static
  ppp: avoid false drop_monitor false positives
  ipv6: bool/const conversions phase2
  ipx: Remove spurious NULL checking in ipx_ioctl().
  ...

1 files changed, 0 insertions, 115 deletions

diff --git a/drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.h b/drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.h
deleted file mode 100644
index 3ac1af2771d..00000000000
--- a/drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * Generic library functions for the MSF (Media and Switch Fabric) unit
- * found on the Intel IXP2400 network processor.
- *
- * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
- * Dedicated to Marija Kulikova.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as
- * published by the Free Software Foundation; either version 2.1 of the
- * License, or (at your option) any later version.
- */
-
-#ifndef __IXP2400_MSF_H
-#define __IXP2400_MSF_H
-
-struct ixp2400_msf_parameters
-{
-	u32				rx_mode;
-	unsigned			rxclk01_multiplier:2;
-	unsigned			rxclk23_multiplier:2;
-	unsigned			rx_poll_ports:6;
-	u32				rx_channel_mode[4];
-
-	u32				tx_mode;
-	unsigned			txclk01_multiplier:2;
-	unsigned			txclk23_multiplier:2;
-	unsigned			tx_poll_ports:6;
-	u32				tx_channel_mode[4];
-};
-
-void ixp2400_msf_init(struct ixp2400_msf_parameters *mp);
-
-#define IXP2400_PLL_MULTIPLIER_48		0x00
-#define IXP2400_PLL_MULTIPLIER_24		0x01
-#define IXP2400_PLL_MULTIPLIER_16		0x02
-#define IXP2400_PLL_MULTIPLIER_12		0x03
-
-#define IXP2400_RX_MODE_CSIX			0x00400000
-#define IXP2400_RX_MODE_UTOPIA_POS		0x00000000
-#define IXP2400_RX_MODE_WIDTH_MASK		0x00300000
-#define IXP2400_RX_MODE_1x16_2x8		0x00300000
-#define IXP2400_RX_MODE_4x8			0x00200000
-#define IXP2400_RX_MODE_2x16			0x00100000
-#define IXP2400_RX_MODE_1x32			0x00000000
-#define IXP2400_RX_MODE_MPHY			0x00080000
-#define IXP2400_RX_MODE_SPHY			0x00000000
-#define IXP2400_RX_MODE_MPHY_32			0x00040000
-#define IXP2400_RX_MODE_MPHY_4			0x00000000
-#define IXP2400_RX_MODE_MPHY_POLLED_STATUS	0x00020000
-#define IXP2400_RX_MODE_MPHY_DIRECT_STATUS	0x00000000
-#define IXP2400_RX_MODE_CBUS_FULL_DUPLEX	0x00010000
-#define IXP2400_RX_MODE_CBUS_SIMPLEX		0x00000000
-#define IXP2400_RX_MODE_MPHY_LEVEL2		0x00004000
-#define IXP2400_RX_MODE_MPHY_LEVEL3		0x00000000
-#define IXP2400_RX_MODE_CBUS_8BIT		0x00002000
-#define IXP2400_RX_MODE_CBUS_4BIT		0x00000000
-#define IXP2400_RX_MODE_CSIX_SINGLE_FREELIST	0x00000200
-#define IXP2400_RX_MODE_CSIX_SPLIT_FREELISTS	0x00000000
-#define IXP2400_RX_MODE_RBUF_SIZE_MASK		0x0000000c
-#define IXP2400_RX_MODE_RBUF_SIZE_256		0x00000008
-#define IXP2400_RX_MODE_RBUF_SIZE_128		0x00000004
-#define IXP2400_RX_MODE_RBUF_SIZE_64		0x00000000
-
-#define IXP2400_PORT_RX_MODE_SLAVE		0x00000040
-#define IXP2400_PORT_RX_MODE_MASTER		0x00000000
-#define IXP2400_PORT_RX_MODE_POS_PHY_L3		0x00000020
-#define IXP2400_PORT_RX_MODE_POS_PHY_L2		0x00000000
-#define IXP2400_PORT_RX_MODE_POS_PHY		0x00000010
-#define IXP2400_PORT_RX_MODE_UTOPIA		0x00000000
-#define IXP2400_PORT_RX_MODE_EVEN_PARITY	0x0000000c
-#define IXP2400_PORT_RX_MODE_ODD_PARITY		0x00000008
-#define IXP2400_PORT_RX_MODE_NO_PARITY		0x00000000
-#define IXP2400_PORT_RX_MODE_UTOPIA_BIG_CELLS	0x00000002
-#define IXP2400_PORT_RX_MODE_UTOPIA_NORMAL_CELLS	0x00000000
-#define IXP2400_PORT_RX_MODE_2_CYCLE_DECODE	0x00000001
-#define IXP2400_PORT_RX_MODE_1_CYCLE_DECODE	0x00000000
-
-#define IXP2400_TX_MODE_CSIX			0x00400000
-#define IXP2400_TX_MODE_UTOPIA_POS		0x00000000
-#define IXP2400_TX_MODE_WIDTH_MASK		0x00300000
-#define IXP2400_TX_MODE_1x16_2x8		0x00300000
-#define IXP2400_TX_MODE_4x8			0x00200000
-#define IXP2400_TX_MODE_2x16			0x00100000
-#define IXP2400_TX_MODE_1x32			0x00000000
-#define IXP2400_TX_MODE_MPHY			0x00080000
-#define IXP2400_TX_MODE_SPHY			0x00000000
-#define IXP2400_TX_MODE_MPHY_32			0x00040000
-#define IXP2400_TX_MODE_MPHY_4			0x00000000
-#define IXP2400_TX_MODE_MPHY_POLLED_STATUS	0x00020000
-#define IXP2400_TX_MODE_MPHY_DIRECT_STATUS	0x00000000
-#define IXP2400_TX_MODE_CBUS_FULL_DUPLEX	0x00010000
-#define IXP2400_TX_MODE_CBUS_SIMPLEX		0x00000000
-#define IXP2400_TX_MODE_MPHY_LEVEL2		0x00004000
-#define IXP2400_TX_MODE_MPHY_LEVEL3		0x00000000
-#define IXP2400_TX_MODE_CBUS_8BIT		0x00002000
-#define IXP2400_TX_MODE_CBUS_4BIT		0x00000000
-#define IXP2400_TX_MODE_TBUF_SIZE_MASK		0x0000000c
-#define IXP2400_TX_MODE_TBUF_SIZE_256		0x00000008
-#define IXP2400_TX_MODE_TBUF_SIZE_128		0x00000004
-#define IXP2400_TX_MODE_TBUF_SIZE_64		0x00000000
-
-#define IXP2400_PORT_TX_MODE_SLAVE		0x00000040
-#define IXP2400_PORT_TX_MODE_MASTER		0x00000000
-#define IXP2400_PORT_TX_MODE_POS_PHY		0x00000010
-#define IXP2400_PORT_TX_MODE_UTOPIA		0x00000000
-#define IXP2400_PORT_TX_MODE_EVEN_PARITY	0x0000000c
-#define IXP2400_PORT_TX_MODE_ODD_PARITY		0x00000008
-#define IXP2400_PORT_TX_MODE_NO_PARITY		0x00000000
-#define IXP2400_PORT_TX_MODE_UTOPIA_BIG_CELLS	0x00000002
-#define IXP2400_PORT_TX_MODE_2_CYCLE_DECODE	0x00000001
-#define IXP2400_PORT_TX_MODE_1_CYCLE_DECODE	0x00000000
-
-
-#endif