diff options
| author | Yaniv Rosner <yanivr@broadcom.com> | 2013-03-07 13:27:33 +0000 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2013-03-08 00:35:44 -0500 |
| commit | 5f3347e6e75768985a088d959c49fb66263087b6 (patch) | |
| tree | 4c78b24ff9b1ee3efcdf20c1d458c70ca14a54b2 /drivers/net/ethernet | |
| parent | 87ab7f6f2874f1115817e394a7ed2dea1c72549e (diff) | |
bnx2x: Fix intermittent long KR2 link up time
When a KR2 device is connected to a KR link-partner, sometimes it requires
disabling KR2 for the link to come up. To get a KR2 link up later, in case no
base pages are seen, the KR2 is restored. The problem was that some link
partners cleared their advertised BP/NP after around two seconds, causing the
driver to disable/enable KR2 link all the time.
The fix was to wait at least 5 seconds before checking KR2 recovery.
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet')
| -rw-r--r-- | drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 11 | ||||
| -rw-r--r-- | drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h | 3 |
2 files changed, 13 insertions, 1 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 31c5787970d..00ac4932f4c 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -12527,6 +12527,7 @@ int bnx2x_phy_init(struct link_params *params, struct link_vars *vars) vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; vars->mac_type = MAC_TYPE_NONE; vars->phy_flags = 0; + vars->check_kr2_recovery_cnt = 0; /* Driver opens NIG-BRB filters */ bnx2x_set_rx_filter(params, 1); /* Check if link flap can be avoided */ @@ -13411,6 +13412,7 @@ static void bnx2x_disable_kr2(struct link_params *params, vars->link_attr_sync &= ~LINK_ATTR_SYNC_KR2_ENABLE; bnx2x_update_link_attr(params, vars->link_attr_sync); + vars->check_kr2_recovery_cnt = CHECK_KR2_RECOVERY_CNT; /* Restart AN on leading lane */ bnx2x_warpcore_restart_AN_KR(phy, params); } @@ -13439,6 +13441,15 @@ static void bnx2x_check_kr2_wa(struct link_params *params, return; } + /* Once KR2 was disabled, wait 5 seconds before checking KR2 recovery + * since some switches tend to reinit the AN process and clear the + * advertised BP/NP after ~2 seconds causing the KR2 to be disabled + * and recovered many times + */ + if (vars->check_kr2_recovery_cnt > 0) { + vars->check_kr2_recovery_cnt--; + return; + } lane = bnx2x_get_warpcore_lane(phy, params); CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK, MDIO_AER_BLOCK_AER_REG, lane); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h index be5c195d03d..f92fcf71be0 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h @@ -342,7 +342,8 @@ struct link_vars { u32 link_status; u32 eee_status; u8 fault_detected; - u8 rsrv1; + u8 check_kr2_recovery_cnt; +#define CHECK_KR2_RECOVERY_CNT 5 u16 periodic_flags; #define PERIODIC_FLAGS_LINK_EVENT 0x0001 |