Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 527 insertions, 0 deletions

diff --git a/drivers/net/gianfar_ethtool.c b/drivers/net/gianfar_ethtool.c
new file mode 100644
index 00000000000..28046e9e88b
--- /dev/null
+++ b/drivers/net/gianfar_ethtool.c
@@ -0,0 +1,527 @@
+/*
+ *  drivers/net/gianfar_ethtool.c
+ *
+ *  Gianfar Ethernet Driver
+ *  Ethtool support for Gianfar Enet
+ *  Based on e1000 ethtool support
+ *
+ *  Author: Andy Fleming
+ *  Maintainer: Kumar Gala (kumar.gala@freescale.com)
+ *
+ *  Copyright (c) 2003,2004 Freescale Semiconductor, Inc.
+ *
+ *  This software may be used and distributed according to 
+ *  the terms of the GNU Public License, Version 2, incorporated herein 
+ *  by reference.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/crc32.h>
+#include <asm/types.h>
+#include <asm/uaccess.h>
+#include <linux/ethtool.h>
+
+#include "gianfar.h"
+
+#define is_power_of_2(x)        ((x) != 0 && (((x) & ((x) - 1)) == 0))
+
+extern int startup_gfar(struct net_device *dev);
+extern void stop_gfar(struct net_device *dev);
+extern void gfar_receive(int irq, void *dev_id, struct pt_regs *regs);
+
+void gfar_fill_stats(struct net_device *dev, struct ethtool_stats *dummy,
+		     u64 * buf);
+void gfar_gstrings(struct net_device *dev, u32 stringset, u8 * buf);
+int gfar_gcoalesce(struct net_device *dev, struct ethtool_coalesce *cvals);
+int gfar_scoalesce(struct net_device *dev, struct ethtool_coalesce *cvals);
+void gfar_gringparam(struct net_device *dev, struct ethtool_ringparam *rvals);
+int gfar_sringparam(struct net_device *dev, struct ethtool_ringparam *rvals);
+void gfar_gdrvinfo(struct net_device *dev, struct ethtool_drvinfo *drvinfo);
+
+static char stat_gstrings[][ETH_GSTRING_LEN] = {
+	"rx-dropped-by-kernel",
+	"rx-large-frame-errors",
+	"rx-short-frame-errors",
+	"rx-non-octet-errors",
+	"rx-crc-errors",
+	"rx-overrun-errors",
+	"rx-busy-errors",
+	"rx-babbling-errors",
+	"rx-truncated-frames",
+	"ethernet-bus-error",
+	"tx-babbling-errors",
+	"tx-underrun-errors",
+	"rx-skb-missing-errors",
+	"tx-timeout-errors",
+	"tx-rx-64-frames",
+	"tx-rx-65-127-frames",
+	"tx-rx-128-255-frames",
+	"tx-rx-256-511-frames",
+	"tx-rx-512-1023-frames",
+	"tx-rx-1024-1518-frames",
+	"tx-rx-1519-1522-good-vlan",
+	"rx-bytes",
+	"rx-packets",
+	"rx-fcs-errors",
+	"receive-multicast-packet",
+	"receive-broadcast-packet",
+	"rx-control-frame-packets",
+	"rx-pause-frame-packets",
+	"rx-unknown-op-code",
+	"rx-alignment-error",
+	"rx-frame-length-error",
+	"rx-code-error",
+	"rx-carrier-sense-error",
+	"rx-undersize-packets",
+	"rx-oversize-packets",
+	"rx-fragmented-frames",
+	"rx-jabber-frames",
+	"rx-dropped-frames",
+	"tx-byte-counter",
+	"tx-packets",
+	"tx-multicast-packets",
+	"tx-broadcast-packets",
+	"tx-pause-control-frames",
+	"tx-deferral-packets",
+	"tx-excessive-deferral-packets",
+	"tx-single-collision-packets",
+	"tx-multiple-collision-packets",
+	"tx-late-collision-packets",
+	"tx-excessive-collision-packets",
+	"tx-total-collision",
+	"reserved",
+	"tx-dropped-frames",
+	"tx-jabber-frames",
+	"tx-fcs-errors",
+	"tx-control-frames",
+	"tx-oversize-frames",
+	"tx-undersize-frames",
+	"tx-fragmented-frames",
+};
+
+/* Fill in an array of 64-bit statistics from various sources.
+ * This array will be appended to the end of the ethtool_stats
+ * structure, and returned to user space
+ */
+void gfar_fill_stats(struct net_device *dev, struct ethtool_stats *dummy, u64 * buf)
+{
+	int i;
+	struct gfar_private *priv = netdev_priv(dev);
+	u32 *rmon = (u32 *) & priv->regs->rmon;
+	u64 *extra = (u64 *) & priv->extra_stats;
+	struct gfar_stats *stats = (struct gfar_stats *) buf;
+
+	for (i = 0; i < GFAR_RMON_LEN; i++) {
+		stats->rmon[i] = (u64) (rmon[i]);
+	}
+
+	for (i = 0; i < GFAR_EXTRA_STATS_LEN; i++) {
+		stats->extra[i] = extra[i];
+	}
+}
+
+/* Returns the number of stats (and their corresponding strings) */
+int gfar_stats_count(struct net_device *dev)
+{
+	return GFAR_STATS_LEN;
+}
+
+void gfar_gstrings_normon(struct net_device *dev, u32 stringset, u8 * buf)
+{
+	memcpy(buf, stat_gstrings, GFAR_EXTRA_STATS_LEN * ETH_GSTRING_LEN);
+}
+
+void gfar_fill_stats_normon(struct net_device *dev, 
+		struct ethtool_stats *dummy, u64 * buf)
+{
+	int i;
+	struct gfar_private *priv = netdev_priv(dev);
+	u64 *extra = (u64 *) & priv->extra_stats;
+
+	for (i = 0; i < GFAR_EXTRA_STATS_LEN; i++) {
+		buf[i] = extra[i];
+	}
+}
+
+
+int gfar_stats_count_normon(struct net_device *dev)
+{
+	return GFAR_EXTRA_STATS_LEN;
+}
+/* Fills in the drvinfo structure with some basic info */
+void gfar_gdrvinfo(struct net_device *dev, struct
+	      ethtool_drvinfo *drvinfo)
+{
+	strncpy(drvinfo->driver, DRV_NAME, GFAR_INFOSTR_LEN);
+	strncpy(drvinfo->version, gfar_driver_version, GFAR_INFOSTR_LEN);
+	strncpy(drvinfo->fw_version, "N/A", GFAR_INFOSTR_LEN);
+	strncpy(drvinfo->bus_info, "N/A", GFAR_INFOSTR_LEN);
+	drvinfo->n_stats = GFAR_STATS_LEN;
+	drvinfo->testinfo_len = 0;
+	drvinfo->regdump_len = 0;
+	drvinfo->eedump_len = 0;
+}
+
+/* Return the current settings in the ethtool_cmd structure */
+int gfar_gsettings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct gfar_private *priv = netdev_priv(dev);
+	uint gigabit_support = 
+		priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT ?
+			SUPPORTED_1000baseT_Full : 0;
+	uint gigabit_advert = 
+		priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT ?
+			ADVERTISED_1000baseT_Full: 0;
+
+	cmd->supported = (SUPPORTED_10baseT_Half
+			  | SUPPORTED_100baseT_Half
+			  | SUPPORTED_100baseT_Full
+			  | gigabit_support | SUPPORTED_Autoneg);
+
+	/* For now, we always advertise everything */
+	cmd->advertising = (ADVERTISED_10baseT_Half
+			    | ADVERTISED_100baseT_Half
+			    | ADVERTISED_100baseT_Full
+			    | gigabit_advert | ADVERTISED_Autoneg);
+
+	cmd->speed = priv->mii_info->speed;
+	cmd->duplex = priv->mii_info->duplex;
+	cmd->port = PORT_MII;
+	cmd->phy_address = priv->mii_info->mii_id;
+	cmd->transceiver = XCVR_EXTERNAL;
+	cmd->autoneg = AUTONEG_ENABLE;
+	cmd->maxtxpkt = priv->txcount;
+	cmd->maxrxpkt = priv->rxcount;
+
+	return 0;
+}
+
+/* Return the length of the register structure */
+int gfar_reglen(struct net_device *dev)
+{
+	return sizeof (struct gfar);
+}
+
+/* Return a dump of the GFAR register space */
+void gfar_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *regbuf)
+{
+	int i;
+	struct gfar_private *priv = netdev_priv(dev);
+	u32 *theregs = (u32 *) priv->regs;
+	u32 *buf = (u32 *) regbuf;
+
+	for (i = 0; i < sizeof (struct gfar) / sizeof (u32); i++)
+		buf[i] = theregs[i];
+}
+
+/* Fill in a buffer with the strings which correspond to the
+ * stats */
+void gfar_gstrings(struct net_device *dev, u32 stringset, u8 * buf)
+{
+	memcpy(buf, stat_gstrings, GFAR_STATS_LEN * ETH_GSTRING_LEN);
+}
+
+/* Convert microseconds to ethernet clock ticks, which changes
+ * depending on what speed the controller is running at */
+static unsigned int gfar_usecs2ticks(struct gfar_private *priv, unsigned int usecs)
+{
+	unsigned int count;
+
+	/* The timer is different, depending on the interface speed */
+	switch (priv->mii_info->speed) {
+	case 1000:
+		count = GFAR_GBIT_TIME;
+		break;
+	case 100:
+		count = GFAR_100_TIME;
+		break;
+	case 10:
+	default:
+		count = GFAR_10_TIME;
+		break;
+	}
+
+	/* Make sure we return a number greater than 0
+	 * if usecs > 0 */
+	return ((usecs * 1000 + count - 1) / count);
+}
+
+/* Convert ethernet clock ticks to microseconds */
+static unsigned int gfar_ticks2usecs(struct gfar_private *priv, unsigned int ticks)
+{
+	unsigned int count;
+
+	/* The timer is different, depending on the interface speed */
+	switch (priv->mii_info->speed) {
+	case 1000:
+		count = GFAR_GBIT_TIME;
+		break;
+	case 100:
+		count = GFAR_100_TIME;
+		break;
+	case 10:
+	default:
+		count = GFAR_10_TIME;
+		break;
+	}
+
+	/* Make sure we return a number greater than 0 */
+	/* if ticks is > 0 */
+	return ((ticks * count) / 1000);
+}
+
+/* Get the coalescing parameters, and put them in the cvals
+ * structure.  */
+int gfar_gcoalesce(struct net_device *dev, struct ethtool_coalesce *cvals)
+{
+	struct gfar_private *priv = netdev_priv(dev);
+
+	cvals->rx_coalesce_usecs = gfar_ticks2usecs(priv, priv->rxtime);
+	cvals->rx_max_coalesced_frames = priv->rxcount;
+
+	cvals->tx_coalesce_usecs = gfar_ticks2usecs(priv, priv->txtime);
+	cvals->tx_max_coalesced_frames = priv->txcount;
+
+	cvals->use_adaptive_rx_coalesce = 0;
+	cvals->use_adaptive_tx_coalesce = 0;
+
+	cvals->pkt_rate_low = 0;
+	cvals->rx_coalesce_usecs_low = 0;
+	cvals->rx_max_coalesced_frames_low = 0;
+	cvals->tx_coalesce_usecs_low = 0;
+	cvals->tx_max_coalesced_frames_low = 0;
+
+	/* When the packet rate is below pkt_rate_high but above
+	 * pkt_rate_low (both measured in packets per second) the
+	 * normal {rx,tx}_* coalescing parameters are used.
+	 */
+
+	/* When the packet rate is (measured in packets per second)
+	 * is above pkt_rate_high, the {rx,tx}_*_high parameters are
+	 * used.
+	 */
+	cvals->pkt_rate_high = 0;
+	cvals->rx_coalesce_usecs_high = 0;
+	cvals->rx_max_coalesced_frames_high = 0;
+	cvals->tx_coalesce_usecs_high = 0;
+	cvals->tx_max_coalesced_frames_high = 0;
+
+	/* How often to do adaptive coalescing packet rate sampling,
+	 * measured in seconds.  Must not be zero.
+	 */
+	cvals->rate_sample_interval = 0;
+
+	return 0;
+}
+
+/* Change the coalescing values.
+ * Both cvals->*_usecs and cvals->*_frames have to be > 0
+ * in order for coalescing to be active
+ */
+int gfar_scoalesce(struct net_device *dev, struct ethtool_coalesce *cvals)
+{
+	struct gfar_private *priv = netdev_priv(dev);
+
+	/* Set up rx coalescing */
+	if ((cvals->rx_coalesce_usecs == 0) ||
+	    (cvals->rx_max_coalesced_frames == 0))
+		priv->rxcoalescing = 0;
+	else
+		priv->rxcoalescing = 1;
+
+	priv->rxtime = gfar_usecs2ticks(priv, cvals->rx_coalesce_usecs);
+	priv->rxcount = cvals->rx_max_coalesced_frames;
+
+	/* Set up tx coalescing */
+	if ((cvals->tx_coalesce_usecs == 0) ||
+	    (cvals->tx_max_coalesced_frames == 0))
+		priv->txcoalescing = 0;
+	else
+		priv->txcoalescing = 1;
+
+	priv->txtime = gfar_usecs2ticks(priv, cvals->tx_coalesce_usecs);
+	priv->txcount = cvals->tx_max_coalesced_frames;
+
+	if (priv->rxcoalescing)
+		gfar_write(&priv->regs->rxic,
+			   mk_ic_value(priv->rxcount, priv->rxtime));
+	else
+		gfar_write(&priv->regs->rxic, 0);
+
+	if (priv->txcoalescing)
+		gfar_write(&priv->regs->txic,
+			   mk_ic_value(priv->txcount, priv->txtime));
+	else
+		gfar_write(&priv->regs->txic, 0);
+
+	return 0;
+}
+
+/* Fills in rvals with the current ring parameters.  Currently,
+ * rx, rx_mini, and rx_jumbo rings are the same size, as mini and
+ * jumbo are ignored by the driver */
+void gfar_gringparam(struct net_device *dev, struct ethtool_ringparam *rvals)
+{
+	struct gfar_private *priv = netdev_priv(dev);
+
+	rvals->rx_max_pending = GFAR_RX_MAX_RING_SIZE;
+	rvals->rx_mini_max_pending = GFAR_RX_MAX_RING_SIZE;
+	rvals->rx_jumbo_max_pending = GFAR_RX_MAX_RING_SIZE;
+	rvals->tx_max_pending = GFAR_TX_MAX_RING_SIZE;
+
+	/* Values changeable by the user.  The valid values are
+	 * in the range 1 to the "*_max_pending" counterpart above.
+	 */
+	rvals->rx_pending = priv->rx_ring_size;
+	rvals->rx_mini_pending = priv->rx_ring_size;
+	rvals->rx_jumbo_pending = priv->rx_ring_size;
+	rvals->tx_pending = priv->tx_ring_size;
+}
+
+/* Change the current ring parameters, stopping the controller if
+ * necessary so that we don't mess things up while we're in
+ * motion.  We wait for the ring to be clean before reallocating
+ * the rings. */
+int gfar_sringparam(struct net_device *dev, struct ethtool_ringparam *rvals)
+{
+	u32 tempval;
+	struct gfar_private *priv = netdev_priv(dev);
+	int err = 0;
+
+	if (rvals->rx_pending > GFAR_RX_MAX_RING_SIZE)
+		return -EINVAL;
+
+	if (!is_power_of_2(rvals->rx_pending)) {
+		printk("%s: Ring sizes must be a power of 2\n",
+				dev->name);
+		return -EINVAL;
+	}
+
+	if (rvals->tx_pending > GFAR_TX_MAX_RING_SIZE)
+		return -EINVAL;
+
+	if (!is_power_of_2(rvals->tx_pending)) {
+		printk("%s: Ring sizes must be a power of 2\n",
+				dev->name);
+		return -EINVAL;
+	}
+
+	/* Stop the controller so we don't rx any more frames */
+	/* But first, make sure we clear the bits */
+	tempval = gfar_read(&priv->regs->dmactrl);
+	tempval &= ~(DMACTRL_GRS | DMACTRL_GTS);
+	gfar_write(&priv->regs->dmactrl, tempval);
+
+	tempval = gfar_read(&priv->regs->dmactrl);
+	tempval |= (DMACTRL_GRS | DMACTRL_GTS);
+	gfar_write(&priv->regs->dmactrl, tempval);
+
+	while (!(gfar_read(&priv->regs->ievent) & (IEVENT_GRSC | IEVENT_GTSC)))
+		cpu_relax();
+
+	/* Note that rx is not clean right now */
+	priv->rxclean = 0;
+
+	if (dev->flags & IFF_UP) {
+		/* Tell the driver to process the rest of the frames */
+		gfar_receive(0, (void *) dev, NULL);
+
+		/* Now wait for it to be done */
+		wait_event_interruptible(priv->rxcleanupq, priv->rxclean);
+
+		/* Ok, all packets have been handled.  Now we bring it down,
+		 * change the ring size, and bring it up */
+
+		stop_gfar(dev);
+	}
+
+	priv->rx_ring_size = rvals->rx_pending;
+	priv->tx_ring_size = rvals->tx_pending;
+
+	if (dev->flags & IFF_UP)
+		err = startup_gfar(dev);
+
+	return err;
+}
+
+struct ethtool_ops gfar_ethtool_ops = {
+	.get_settings = gfar_gsettings,
+	.get_drvinfo = gfar_gdrvinfo,
+	.get_regs_len = gfar_reglen,
+	.get_regs = gfar_get_regs,
+	.get_link = ethtool_op_get_link,
+	.get_coalesce = gfar_gcoalesce,
+	.set_coalesce = gfar_scoalesce,
+	.get_ringparam = gfar_gringparam,
+	.set_ringparam = gfar_sringparam,
+	.get_strings = gfar_gstrings,
+	.get_stats_count = gfar_stats_count,
+	.get_ethtool_stats = gfar_fill_stats,
+};
+
+struct ethtool_ops gfar_normon_nocoalesce_ethtool_ops = {
+	.get_settings = gfar_gsettings,
+	.get_drvinfo = gfar_gdrvinfo,
+	.get_regs_len = gfar_reglen,
+	.get_regs = gfar_get_regs,
+	.get_link = ethtool_op_get_link,
+	.get_ringparam = gfar_gringparam,
+	.set_ringparam = gfar_sringparam,
+	.get_strings = gfar_gstrings_normon,
+	.get_stats_count = gfar_stats_count_normon,
+	.get_ethtool_stats = gfar_fill_stats_normon,
+};
+
+struct ethtool_ops gfar_nocoalesce_ethtool_ops = {
+	.get_settings = gfar_gsettings,
+	.get_drvinfo = gfar_gdrvinfo,
+	.get_regs_len = gfar_reglen,
+	.get_regs = gfar_get_regs,
+	.get_link = ethtool_op_get_link,
+	.get_ringparam = gfar_gringparam,
+	.set_ringparam = gfar_sringparam,
+	.get_strings = gfar_gstrings,
+	.get_stats_count = gfar_stats_count,
+	.get_ethtool_stats = gfar_fill_stats,
+};
+
+struct ethtool_ops gfar_normon_ethtool_ops = {
+	.get_settings = gfar_gsettings,
+	.get_drvinfo = gfar_gdrvinfo,
+	.get_regs_len = gfar_reglen,
+	.get_regs = gfar_get_regs,
+	.get_link = ethtool_op_get_link,
+	.get_coalesce = gfar_gcoalesce,
+	.set_coalesce = gfar_scoalesce,
+	.get_ringparam = gfar_gringparam,
+	.set_ringparam = gfar_sringparam,
+	.get_strings = gfar_gstrings_normon,
+	.get_stats_count = gfar_stats_count_normon,
+	.get_ethtool_stats = gfar_fill_stats_normon,
+};
+
+struct ethtool_ops *gfar_op_array[] = {
+	&gfar_ethtool_ops,
+	&gfar_normon_ethtool_ops,
+	&gfar_nocoalesce_ethtool_ops,
+	&gfar_normon_nocoalesce_ethtool_ops
+};