summaryrefslogtreecommitdiffstats
path: root/drivers/net/ibm_newemac/phy.c
diff options
context:
space:
mode:
authorDavid Gibson <david@gibson.dropbear.id.au>2007-08-23 13:56:01 +1000
committerDavid S. Miller <davem@sunset.davemloft.net>2007-10-10 16:51:52 -0700
commit1d3bb996481e116f5f2b127cbd29b83365d2cf62 (patch)
treeb612a1dbf51c920fb5a9758a6d35f9ed37eb927f /drivers/net/ibm_newemac/phy.c
parent03233b90b0977d577322a6e1ddd56d9cc570d406 (diff)
Device tree aware EMAC driver
Based on BenH's earlier work, this is a new version of the EMAC driver for the built-in ethernet found on PowerPC 4xx embedded CPUs. The same ASIC is also found in the Axon bridge chip. This new version is designed to work in the arch/powerpc tree, using the device tree to probe the device, rather than the old and ugly arch/ppc OCP layer. This driver is designed to sit alongside the old driver (that lies in drivers/net/ibm_emac and this one in drivers/net/ibm_newemac). The old driver is left in place to support arch/ppc until arch/ppc itself reaches its final demise (not too long now, with luck). This driver still has a number of things that could do with cleaning up, but I think they can be fixed up after merging. Specifically: - Should be adjusted to properly use the dma mapping API. Axon needs this. - Probe logic needs reworking, in conjuction with the general probing code for of_platform devices. The dependencies here between EMAC, MAL, ZMII etc. make this complicated. At present, it usually works, because we initialize and register the sub-drivers before the EMAC driver itself, and (being in driver code) runs after the devices themselves have been instantiated from the device tree. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers/net/ibm_newemac/phy.c')
-rw-r--r--drivers/net/ibm_newemac/phy.c373
1 files changed, 373 insertions, 0 deletions
diff --git a/drivers/net/ibm_newemac/phy.c b/drivers/net/ibm_newemac/phy.c
new file mode 100644
index 00000000000..aa1f0ddf1e3
--- /dev/null
+++ b/drivers/net/ibm_newemac/phy.c
@@ -0,0 +1,373 @@
+/*
+ * drivers/net/ibm_newemac/phy.c
+ *
+ * Driver for PowerPC 4xx on-chip ethernet controller, PHY support.
+ * Borrowed from sungem_phy.c, though I only kept the generic MII
+ * driver for now.
+ *
+ * This file should be shared with other drivers or eventually
+ * merged as the "low level" part of miilib
+ *
+ * (c) 2003, Benjamin Herrenscmidt (benh@kernel.crashing.org)
+ * (c) 2004-2005, Eugene Surovegin <ebs@ebshome.net>
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/netdevice.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/delay.h>
+
+#include "emac.h"
+#include "phy.h"
+
+static inline int phy_read(struct mii_phy *phy, int reg)
+{
+ return phy->mdio_read(phy->dev, phy->address, reg);
+}
+
+static inline void phy_write(struct mii_phy *phy, int reg, int val)
+{
+ phy->mdio_write(phy->dev, phy->address, reg, val);
+}
+
+int emac_mii_reset_phy(struct mii_phy *phy)
+{
+ int val;
+ int limit = 10000;
+
+ val = phy_read(phy, MII_BMCR);
+ val &= ~(BMCR_ISOLATE | BMCR_ANENABLE);
+ val |= BMCR_RESET;
+ phy_write(phy, MII_BMCR, val);
+
+ udelay(300);
+
+ while (limit--) {
+ val = phy_read(phy, MII_BMCR);
+ if (val >= 0 && (val & BMCR_RESET) == 0)
+ break;
+ udelay(10);
+ }
+ if ((val & BMCR_ISOLATE) && limit > 0)
+ phy_write(phy, MII_BMCR, val & ~BMCR_ISOLATE);
+
+ return limit <= 0;
+}
+
+static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise)
+{
+ int ctl, adv;
+
+ phy->autoneg = AUTONEG_ENABLE;
+ phy->speed = SPEED_10;
+ phy->duplex = DUPLEX_HALF;
+ phy->pause = phy->asym_pause = 0;
+ phy->advertising = advertise;
+
+ ctl = phy_read(phy, MII_BMCR);
+ if (ctl < 0)
+ return ctl;
+ ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE);
+
+ /* First clear the PHY */
+ phy_write(phy, MII_BMCR, ctl);
+
+ /* Setup standard advertise */
+ adv = phy_read(phy, MII_ADVERTISE);
+ if (adv < 0)
+ return adv;
+ adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP |
+ ADVERTISE_PAUSE_ASYM);
+ if (advertise & ADVERTISED_10baseT_Half)
+ adv |= ADVERTISE_10HALF;
+ if (advertise & ADVERTISED_10baseT_Full)
+ adv |= ADVERTISE_10FULL;
+ if (advertise & ADVERTISED_100baseT_Half)
+ adv |= ADVERTISE_100HALF;
+ if (advertise & ADVERTISED_100baseT_Full)
+ adv |= ADVERTISE_100FULL;
+ if (advertise & ADVERTISED_Pause)
+ adv |= ADVERTISE_PAUSE_CAP;
+ if (advertise & ADVERTISED_Asym_Pause)
+ adv |= ADVERTISE_PAUSE_ASYM;
+ phy_write(phy, MII_ADVERTISE, adv);
+
+ if (phy->features &
+ (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half)) {
+ adv = phy_read(phy, MII_CTRL1000);
+ if (adv < 0)
+ return adv;
+ adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
+ if (advertise & ADVERTISED_1000baseT_Full)
+ adv |= ADVERTISE_1000FULL;
+ if (advertise & ADVERTISED_1000baseT_Half)
+ adv |= ADVERTISE_1000HALF;
+ phy_write(phy, MII_CTRL1000, adv);
+ }
+
+ /* Start/Restart aneg */
+ ctl = phy_read(phy, MII_BMCR);
+ ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
+ phy_write(phy, MII_BMCR, ctl);
+
+ return 0;
+}
+
+static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd)
+{
+ int ctl;
+
+ phy->autoneg = AUTONEG_DISABLE;
+ phy->speed = speed;
+ phy->duplex = fd;
+ phy->pause = phy->asym_pause = 0;
+
+ ctl = phy_read(phy, MII_BMCR);
+ if (ctl < 0)
+ return ctl;
+ ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE);
+
+ /* First clear the PHY */
+ phy_write(phy, MII_BMCR, ctl | BMCR_RESET);
+
+ /* Select speed & duplex */
+ switch (speed) {
+ case SPEED_10:
+ break;
+ case SPEED_100:
+ ctl |= BMCR_SPEED100;
+ break;
+ case SPEED_1000:
+ ctl |= BMCR_SPEED1000;
+ break;
+ default:
+ return -EINVAL;
+ }
+ if (fd == DUPLEX_FULL)
+ ctl |= BMCR_FULLDPLX;
+ phy_write(phy, MII_BMCR, ctl);
+
+ return 0;
+}
+
+static int genmii_poll_link(struct mii_phy *phy)
+{
+ int status;
+
+ /* Clear latched value with dummy read */
+ phy_read(phy, MII_BMSR);
+ status = phy_read(phy, MII_BMSR);
+ if (status < 0 || (status & BMSR_LSTATUS) == 0)
+ return 0;
+ if (phy->autoneg == AUTONEG_ENABLE && !(status & BMSR_ANEGCOMPLETE))
+ return 0;
+ return 1;
+}
+
+static int genmii_read_link(struct mii_phy *phy)
+{
+ if (phy->autoneg == AUTONEG_ENABLE) {
+ int glpa = 0;
+ int lpa = phy_read(phy, MII_LPA) & phy_read(phy, MII_ADVERTISE);
+ if (lpa < 0)
+ return lpa;
+
+ if (phy->features &
+ (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half)) {
+ int adv = phy_read(phy, MII_CTRL1000);
+ glpa = phy_read(phy, MII_STAT1000);
+
+ if (glpa < 0 || adv < 0)
+ return adv;
+
+ glpa &= adv << 2;
+ }
+
+ phy->speed = SPEED_10;
+ phy->duplex = DUPLEX_HALF;
+ phy->pause = phy->asym_pause = 0;
+
+ if (glpa & (LPA_1000FULL | LPA_1000HALF)) {
+ phy->speed = SPEED_1000;
+ if (glpa & LPA_1000FULL)
+ phy->duplex = DUPLEX_FULL;
+ } else if (lpa & (LPA_100FULL | LPA_100HALF)) {
+ phy->speed = SPEED_100;
+ if (lpa & LPA_100FULL)
+ phy->duplex = DUPLEX_FULL;
+ } else if (lpa & LPA_10FULL)
+ phy->duplex = DUPLEX_FULL;
+
+ if (phy->duplex == DUPLEX_FULL) {
+ phy->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
+ phy->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
+ }
+ } else {
+ int bmcr = phy_read(phy, MII_BMCR);
+ if (bmcr < 0)
+ return bmcr;
+
+ if (bmcr & BMCR_FULLDPLX)
+ phy->duplex = DUPLEX_FULL;
+ else
+ phy->duplex = DUPLEX_HALF;
+ if (bmcr & BMCR_SPEED1000)
+ phy->speed = SPEED_1000;
+ else if (bmcr & BMCR_SPEED100)
+ phy->speed = SPEED_100;
+ else
+ phy->speed = SPEED_10;
+
+ phy->pause = phy->asym_pause = 0;
+ }
+ return 0;
+}
+
+/* Generic implementation for most 10/100/1000 PHYs */
+static struct mii_phy_ops generic_phy_ops = {
+ .setup_aneg = genmii_setup_aneg,
+ .setup_forced = genmii_setup_forced,
+ .poll_link = genmii_poll_link,
+ .read_link = genmii_read_link
+};
+
+static struct mii_phy_def genmii_phy_def = {
+ .phy_id = 0x00000000,
+ .phy_id_mask = 0x00000000,
+ .name = "Generic MII",
+ .ops = &generic_phy_ops
+};
+
+/* CIS8201 */
+#define MII_CIS8201_10BTCSR 0x16
+#define TENBTCSR_ECHO_DISABLE 0x2000
+#define MII_CIS8201_EPCR 0x17
+#define EPCR_MODE_MASK 0x3000
+#define EPCR_GMII_MODE 0x0000
+#define EPCR_RGMII_MODE 0x1000
+#define EPCR_TBI_MODE 0x2000
+#define EPCR_RTBI_MODE 0x3000
+#define MII_CIS8201_ACSR 0x1c
+#define ACSR_PIN_PRIO_SELECT 0x0004
+
+static int cis8201_init(struct mii_phy *phy)
+{
+ int epcr;
+
+ epcr = phy_read(phy, MII_CIS8201_EPCR);
+ if (epcr < 0)
+ return epcr;
+
+ epcr &= ~EPCR_MODE_MASK;
+
+ switch (phy->mode) {
+ case PHY_MODE_TBI:
+ epcr |= EPCR_TBI_MODE;
+ break;
+ case PHY_MODE_RTBI:
+ epcr |= EPCR_RTBI_MODE;
+ break;
+ case PHY_MODE_GMII:
+ epcr |= EPCR_GMII_MODE;
+ break;
+ case PHY_MODE_RGMII:
+ default:
+ epcr |= EPCR_RGMII_MODE;
+ }
+
+ phy_write(phy, MII_CIS8201_EPCR, epcr);
+
+ /* MII regs override strap pins */
+ phy_write(phy, MII_CIS8201_ACSR,
+ phy_read(phy, MII_CIS8201_ACSR) | ACSR_PIN_PRIO_SELECT);
+
+ /* Disable TX_EN -> CRS echo mode, otherwise 10/HDX doesn't work */
+ phy_write(phy, MII_CIS8201_10BTCSR,
+ phy_read(phy, MII_CIS8201_10BTCSR) | TENBTCSR_ECHO_DISABLE);
+
+ return 0;
+}
+
+static struct mii_phy_ops cis8201_phy_ops = {
+ .init = cis8201_init,
+ .setup_aneg = genmii_setup_aneg,
+ .setup_forced = genmii_setup_forced,
+ .poll_link = genmii_poll_link,
+ .read_link = genmii_read_link
+};
+
+static struct mii_phy_def cis8201_phy_def = {
+ .phy_id = 0x000fc410,
+ .phy_id_mask = 0x000ffff0,
+ .name = "CIS8201 Gigabit Ethernet",
+ .ops = &cis8201_phy_ops
+};
+
+static struct mii_phy_def *mii_phy_table[] = {
+ &cis8201_phy_def,
+ &genmii_phy_def,
+ NULL
+};
+
+int emac_mii_phy_probe(struct mii_phy *phy, int address)
+{
+ struct mii_phy_def *def;
+ int i;
+ u32 id;
+
+ phy->autoneg = AUTONEG_DISABLE;
+ phy->advertising = 0;
+ phy->address = address;
+ phy->speed = SPEED_10;
+ phy->duplex = DUPLEX_HALF;
+ phy->pause = phy->asym_pause = 0;
+
+ /* Take PHY out of isolate mode and reset it. */
+ if (emac_mii_reset_phy(phy))
+ return -ENODEV;
+
+ /* Read ID and find matching entry */
+ id = (phy_read(phy, MII_PHYSID1) << 16) | phy_read(phy, MII_PHYSID2);
+ for (i = 0; (def = mii_phy_table[i]) != NULL; i++)
+ if ((id & def->phy_id_mask) == def->phy_id)
+ break;
+ /* Should never be NULL (we have a generic entry), but... */
+ if (!def)
+ return -ENODEV;
+
+ phy->def = def;
+
+ /* Determine PHY features if needed */
+ phy->features = def->features;
+ if (!phy->features) {
+ u16 bmsr = phy_read(phy, MII_BMSR);
+ if (bmsr & BMSR_ANEGCAPABLE)
+ phy->features |= SUPPORTED_Autoneg;
+ if (bmsr & BMSR_10HALF)
+ phy->features |= SUPPORTED_10baseT_Half;
+ if (bmsr & BMSR_10FULL)
+ phy->features |= SUPPORTED_10baseT_Full;
+ if (bmsr & BMSR_100HALF)
+ phy->features |= SUPPORTED_100baseT_Half;
+ if (bmsr & BMSR_100FULL)
+ phy->features |= SUPPORTED_100baseT_Full;
+ if (bmsr & BMSR_ESTATEN) {
+ u16 esr = phy_read(phy, MII_ESTATUS);
+ if (esr & ESTATUS_1000_TFULL)
+ phy->features |= SUPPORTED_1000baseT_Full;
+ if (esr & ESTATUS_1000_THALF)
+ phy->features |= SUPPORTED_1000baseT_Half;
+ }
+ phy->features |= SUPPORTED_MII;
+ }
+
+ /* Setup default advertising */
+ phy->advertising = phy->features;
+
+ return 0;
+}
+
+MODULE_LICENSE("GPL");