diff options
author | David Gibson <david@gibson.dropbear.id.au> | 2007-08-23 13:56:01 +1000 |
---|---|---|
committer | David S. Miller <davem@sunset.davemloft.net> | 2007-10-10 16:51:52 -0700 |
commit | 1d3bb996481e116f5f2b127cbd29b83365d2cf62 (patch) | |
tree | b612a1dbf51c920fb5a9758a6d35f9ed37eb927f /drivers/net/ibm_newemac/zmii.h | |
parent | 03233b90b0977d577322a6e1ddd56d9cc570d406 (diff) |
Device tree aware EMAC driver
Based on BenH's earlier work, this is a new version of the EMAC driver
for the built-in ethernet found on PowerPC 4xx embedded CPUs. The
same ASIC is also found in the Axon bridge chip. This new version is
designed to work in the arch/powerpc tree, using the device tree to
probe the device, rather than the old and ugly arch/ppc OCP layer.
This driver is designed to sit alongside the old driver (that lies in
drivers/net/ibm_emac and this one in drivers/net/ibm_newemac). The
old driver is left in place to support arch/ppc until arch/ppc itself
reaches its final demise (not too long now, with luck).
This driver still has a number of things that could do with cleaning
up, but I think they can be fixed up after merging. Specifically:
- Should be adjusted to properly use the dma mapping API.
Axon needs this.
- Probe logic needs reworking, in conjuction with the general
probing code for of_platform devices. The dependencies here between
EMAC, MAL, ZMII etc. make this complicated. At present, it usually
works, because we initialize and register the sub-drivers before the
EMAC driver itself, and (being in driver code) runs after the devices
themselves have been instantiated from the device tree.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers/net/ibm_newemac/zmii.h')
-rw-r--r-- | drivers/net/ibm_newemac/zmii.h | 73 |
1 files changed, 73 insertions, 0 deletions
diff --git a/drivers/net/ibm_newemac/zmii.h b/drivers/net/ibm_newemac/zmii.h new file mode 100644 index 00000000000..82a9968b1f7 --- /dev/null +++ b/drivers/net/ibm_newemac/zmii.h @@ -0,0 +1,73 @@ +/* + * drivers/net/ibm_newemac/zmii.h + * + * Driver for PowerPC 4xx on-chip ethernet controller, ZMII bridge support. + * + * Copyright (c) 2004, 2005 Zultys Technologies. + * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> + * + * Based on original work by + * Armin Kuster <akuster@mvista.com> + * Copyright 2001 MontaVista Softare Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#ifndef __IBM_NEWEMAC_ZMII_H +#define __IBM_NEWEMAC_ZMII_H + +/* ZMII bridge registers */ +struct zmii_regs { + u32 fer; /* Function enable reg */ + u32 ssr; /* Speed select reg */ + u32 smiirs; /* SMII status reg */ +}; + +/* ZMII device */ +struct zmii_instance { + struct zmii_regs __iomem *base; + + /* Only one EMAC whacks us at a time */ + struct mutex lock; + + /* subset of PHY_MODE_XXXX */ + int mode; + + /* number of EMACs using this ZMII bridge */ + int users; + + /* FER value left by firmware */ + u32 fer_save; + + /* OF device instance */ + struct of_device *ofdev; +}; + +#ifdef CONFIG_IBM_NEW_EMAC_ZMII + +extern int zmii_init(void); +extern void zmii_exit(void); +extern int zmii_attach(struct of_device *ofdev, int input, int *mode); +extern void zmii_detach(struct of_device *ofdev, int input); +extern void zmii_get_mdio(struct of_device *ofdev, int input); +extern void zmii_put_mdio(struct of_device *ofdev, int input); +extern void zmii_set_speed(struct of_device *ofdev, int input, int speed); +extern int zmii_get_regs_len(struct of_device *ocpdev); +extern void *zmii_dump_regs(struct of_device *ofdev, void *buf); + +#else +# define zmii_init() 0 +# define zmii_exit() do { } while(0) +# define zmii_attach(x,y,z) (-ENXIO) +# define zmii_detach(x,y) do { } while(0) +# define zmii_get_mdio(x,y) do { } while(0) +# define zmii_put_mdio(x,y) do { } while(0) +# define zmii_set_speed(x,y,z) do { } while(0) +# define zmii_get_regs_len(x) 0 +# define zmii_dump_regs(x,buf) (buf) +#endif /* !CONFIG_IBM_NEW_EMAC_ZMII */ + +#endif /* __IBM_NEWEMAC_ZMII_H */ |