Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking changes from David Miller:

 1) GRE now works over ipv6, from Dmitry Kozlov.

 2) Make SCTP more network namespace aware, from Eric Biederman.

 3) TEAM driver now works with non-ethernet devices, from Jiri Pirko.

 4) Make openvswitch network namespace aware, from Pravin B Shelar.

 5) IPV6 NAT implementation, from Patrick McHardy.

 6) Server side support for TCP Fast Open, from Jerry Chu and others.

 7) Packet BPF filter supports MOD and XOR, from Eric Dumazet and Daniel
    Borkmann.

 8) Increate the loopback default MTU to 64K, from Eric Dumazet.

 9) Use a per-task rather than per-socket page fragment allocator for
    outgoing networking traffic.  This benefits processes that have very
    many mostly idle sockets, which is quite common.

    From Eric Dumazet.

10) Use up to 32K for page fragment allocations, with fallbacks to
    smaller sizes when higher order page allocations fail.  Benefits are
    a) less segments for driver to process b) less calls to page
    allocator c) less waste of space.

    From Eric Dumazet.

11) Allow GRO to be used on GRE tunnels, from Eric Dumazet.

12) VXLAN device driver, one way to handle VLAN issues such as the
    limitation of 4096 VLAN IDs yet still have some level of isolation.
    From Stephen Hemminger.

13) As usual there is a large boatload of driver changes, with the scale
    perhaps tilted towards the wireless side this time around.

Fix up various fairly trivial conflicts, mostly caused by the user
namespace changes.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1012 commits)
  hyperv: Add buffer for extended info after the RNDIS response message.
  hyperv: Report actual status in receive completion packet
  hyperv: Remove extra allocated space for recv_pkt_list elements
  hyperv: Fix page buffer handling in rndis_filter_send_request()
  hyperv: Fix the missing return value in rndis_filter_set_packet_filter()
  hyperv: Fix the max_xfer_size in RNDIS initialization
  vxlan: put UDP socket in correct namespace
  vxlan: Depend on CONFIG_INET
  sfc: Fix the reported priorities of different filter types
  sfc: Remove EFX_FILTER_FLAG_RX_OVERRIDE_IP
  sfc: Fix loopback self-test with separate_tx_channels=1
  sfc: Fix MCDI structure field lookup
  sfc: Add parentheses around use of bitfield macro arguments
  sfc: Fix null function pointer in efx_sriov_channel_type
  vxlan: virtual extensible lan
  igmp: export symbol ip_mc_leave_group
  netlink: add attributes to fdb interface
  tg3: unconditionally select HWMON support when tg3 is enabled.
  Revert "net: ti cpsw ethernet: allow reading phy interface mode from DT"
  gre: fix sparse warning
  ...

1 files changed, 448 insertions, 0 deletions

diff --git a/drivers/net/ieee802154/fakehard.c b/drivers/net/ieee802154/fakehard.c
new file mode 100644
index 00000000000..7d39add7d46
--- /dev/null
+++ b/drivers/net/ieee802154/fakehard.c
@@ -0,0 +1,448 @@
+/*
+ * Sample driver for HardMAC IEEE 802.15.4 devices
+ *
+ * Copyright (C) 2009 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Written by:
+ * Dmitry Eremin-Solenikov <dmitry.baryshkov@siemens.com>
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+
+#include <net/af_ieee802154.h>
+#include <net/ieee802154_netdev.h>
+#include <net/ieee802154.h>
+#include <net/nl802154.h>
+#include <net/wpan-phy.h>
+
+struct fakehard_priv {
+	struct wpan_phy *phy;
+};
+
+static struct wpan_phy *fake_to_phy(const struct net_device *dev)
+{
+	struct fakehard_priv *priv = netdev_priv(dev);
+	return priv->phy;
+}
+
+/**
+ * fake_get_phy - Return a phy corresponding to this device.
+ * @dev: The network device for which to return the wan-phy object
+ *
+ * This function returns a wpan-phy object corresponding to the passed
+ * network device. Reference counter for wpan-phy object is incremented,
+ * so when the wpan-phy isn't necessary, you should drop the reference
+ * via @wpan_phy_put() call.
+ */
+static struct wpan_phy *fake_get_phy(const struct net_device *dev)
+{
+	struct wpan_phy *phy = fake_to_phy(dev);
+	return to_phy(get_device(&phy->dev));
+}
+
+/**
+ * fake_get_pan_id - Retrieve the PAN ID of the device.
+ * @dev: The network device to retrieve the PAN of.
+ *
+ * Return the ID of the PAN from the PIB.
+ */
+static u16 fake_get_pan_id(const struct net_device *dev)
+{
+	BUG_ON(dev->type != ARPHRD_IEEE802154);
+
+	return 0xeba1;
+}
+
+/**
+ * fake_get_short_addr - Retrieve the short address of the device.
+ * @dev: The network device to retrieve the short address of.
+ *
+ * Returns the IEEE 802.15.4 short-form address cached for this
+ * device. If the device has not yet had a short address assigned
+ * then this should return 0xFFFF to indicate a lack of association.
+ */
+static u16 fake_get_short_addr(const struct net_device *dev)
+{
+	BUG_ON(dev->type != ARPHRD_IEEE802154);
+
+	return 0x1;
+}
+
+/**
+ * fake_get_dsn - Retrieve the DSN of the device.
+ * @dev: The network device to retrieve the DSN for.
+ *
+ * Returns the IEEE 802.15.4 DSN for the network device.
+ * The DSN is the sequence number which will be added to each
+ * packet or MAC command frame by the MAC during transmission.
+ *
+ * DSN means 'Data Sequence Number'.
+ *
+ * Note: This is in section 7.2.1.2 of the IEEE 802.15.4-2006
+ *       document.
+ */
+static u8 fake_get_dsn(const struct net_device *dev)
+{
+	BUG_ON(dev->type != ARPHRD_IEEE802154);
+
+	return 0x00; /* DSN are implemented in HW, so return just 0 */
+}
+
+/**
+ * fake_get_bsn - Retrieve the BSN of the device.
+ * @dev: The network device to retrieve the BSN for.
+ *
+ * Returns the IEEE 802.15.4 BSN for the network device.
+ * The BSN is the sequence number which will be added to each
+ * beacon frame sent by the MAC.
+ *
+ * BSN means 'Beacon Sequence Number'.
+ *
+ * Note: This is in section 7.2.1.2 of the IEEE 802.15.4-2006
+ *       document.
+ */
+static u8 fake_get_bsn(const struct net_device *dev)
+{
+	BUG_ON(dev->type != ARPHRD_IEEE802154);
+
+	return 0x00; /* BSN are implemented in HW, so return just 0 */
+}
+
+/**
+ * fake_assoc_req - Make an association request to the HW.
+ * @dev: The network device which we are associating to a network.
+ * @addr: The coordinator with which we wish to associate.
+ * @channel: The channel on which to associate.
+ * @cap: The capability information field to use in the association.
+ *
+ * Start an association with a coordinator. The coordinator's address
+ * and PAN ID can be found in @addr.
+ *
+ * Note: This is in section 7.3.1 and 7.5.3.1 of the IEEE
+ *       802.15.4-2006 document.
+ */
+static int fake_assoc_req(struct net_device *dev,
+		struct ieee802154_addr *addr, u8 channel, u8 page, u8 cap)
+{
+	struct wpan_phy *phy = fake_to_phy(dev);
+
+	mutex_lock(&phy->pib_lock);
+	phy->current_channel = channel;
+	phy->current_page = page;
+	mutex_unlock(&phy->pib_lock);
+
+	/* We simply emulate it here */
+	return ieee802154_nl_assoc_confirm(dev, fake_get_short_addr(dev),
+			IEEE802154_SUCCESS);
+}
+
+/**
+ * fake_assoc_resp - Send an association response to a device.
+ * @dev: The network device on which to send the response.
+ * @addr: The address of the device to respond to.
+ * @short_addr: The assigned short address for the device (if any).
+ * @status: The result of the association request.
+ *
+ * Queue the association response of the coordinator to another
+ * device's attempt to associate with the network which we
+ * coordinate. This is then added to the indirect-send queue to be
+ * transmitted to the end device when it polls for data.
+ *
+ * Note: This is in section 7.3.2 and 7.5.3.1 of the IEEE
+ *       802.15.4-2006 document.
+ */
+static int fake_assoc_resp(struct net_device *dev,
+		struct ieee802154_addr *addr, u16 short_addr, u8 status)
+{
+	return 0;
+}
+
+/**
+ * fake_disassoc_req - Disassociate a device from a network.
+ * @dev: The network device on which we're disassociating a device.
+ * @addr: The device to disassociate from the network.
+ * @reason: The reason to give to the device for being disassociated.
+ *
+ * This sends a disassociation notification to the device being
+ * disassociated from the network.
+ *
+ * Note: This is in section 7.5.3.2 of the IEEE 802.15.4-2006
+ *       document, with the reason described in 7.3.3.2.
+ */
+static int fake_disassoc_req(struct net_device *dev,
+		struct ieee802154_addr *addr, u8 reason)
+{
+	return ieee802154_nl_disassoc_confirm(dev, IEEE802154_SUCCESS);
+}
+
+/**
+ * fake_start_req - Start an IEEE 802.15.4 PAN.
+ * @dev: The network device on which to start the PAN.
+ * @addr: The coordinator address to use when starting the PAN.
+ * @channel: The channel on which to start the PAN.
+ * @bcn_ord: Beacon order.
+ * @sf_ord: Superframe order.
+ * @pan_coord: Whether or not we are the PAN coordinator or just
+ *             requesting a realignment perhaps?
+ * @blx: Battery Life Extension feature bitfield.
+ * @coord_realign: Something to realign something else.
+ *
+ * If pan_coord is non-zero then this starts a network with the
+ * provided parameters, otherwise it attempts a coordinator
+ * realignment of the stated network instead.
+ *
+ * Note: This is in section 7.5.2.3 of the IEEE 802.15.4-2006
+ * document, with 7.3.8 describing coordinator realignment.
+ */
+static int fake_start_req(struct net_device *dev, struct ieee802154_addr *addr,
+				u8 channel, u8 page,
+				u8 bcn_ord, u8 sf_ord, u8 pan_coord, u8 blx,
+				u8 coord_realign)
+{
+	struct wpan_phy *phy = fake_to_phy(dev);
+
+	mutex_lock(&phy->pib_lock);
+	phy->current_channel = channel;
+	phy->current_page = page;
+	mutex_unlock(&phy->pib_lock);
+
+	/* We don't emulate beacons here at all, so START should fail */
+	ieee802154_nl_start_confirm(dev, IEEE802154_INVALID_PARAMETER);
+	return 0;
+}
+
+/**
+ * fake_scan_req - Start a channel scan.
+ * @dev: The network device on which to perform a channel scan.
+ * @type: The type of scan to perform.
+ * @channels: The channel bitmask to scan.
+ * @duration: How long to spend on each channel.
+ *
+ * This starts either a passive (energy) scan or an active (PAN) scan
+ * on the channels indicated in the @channels bitmask. The duration of
+ * the scan is measured in terms of superframe duration. Specifically,
+ * the scan will spend aBaseSuperFrameDuration * ((2^n) + 1) on each
+ * channel.
+ *
+ * Note: This is in section 7.5.2.1 of the IEEE 802.15.4-2006 document.
+ */
+static int fake_scan_req(struct net_device *dev, u8 type, u32 channels,
+		u8 page, u8 duration)
+{
+	u8 edl[27] = {};
+	return ieee802154_nl_scan_confirm(dev, IEEE802154_SUCCESS, type,
+			channels, page,
+			type == IEEE802154_MAC_SCAN_ED ? edl : NULL);
+}
+
+static struct ieee802154_mlme_ops fake_mlme = {
+	.assoc_req = fake_assoc_req,
+	.assoc_resp = fake_assoc_resp,
+	.disassoc_req = fake_disassoc_req,
+	.start_req = fake_start_req,
+	.scan_req = fake_scan_req,
+
+	.get_phy = fake_get_phy,
+
+	.get_pan_id = fake_get_pan_id,
+	.get_short_addr = fake_get_short_addr,
+	.get_dsn = fake_get_dsn,
+	.get_bsn = fake_get_bsn,
+};
+
+static int ieee802154_fake_open(struct net_device *dev)
+{
+	netif_start_queue(dev);
+	return 0;
+}
+
+static int ieee802154_fake_close(struct net_device *dev)
+{
+	netif_stop_queue(dev);
+	return 0;
+}
+
+static netdev_tx_t ieee802154_fake_xmit(struct sk_buff *skb,
+					      struct net_device *dev)
+{
+	dev->stats.tx_packets++;
+	dev->stats.tx_bytes += skb->len;
+
+	/* FIXME: do hardware work here ... */
+
+	dev_kfree_skb(skb);
+	return NETDEV_TX_OK;
+}
+
+
+static int ieee802154_fake_ioctl(struct net_device *dev, struct ifreq *ifr,
+		int cmd)
+{
+	struct sockaddr_ieee802154 *sa =
+		(struct sockaddr_ieee802154 *)&ifr->ifr_addr;
+	u16 pan_id, short_addr;
+
+	switch (cmd) {
+	case SIOCGIFADDR:
+		/* FIXME: fixed here, get from device IRL */
+		pan_id = fake_get_pan_id(dev);
+		short_addr = fake_get_short_addr(dev);
+		if (pan_id == IEEE802154_PANID_BROADCAST ||
+		    short_addr == IEEE802154_ADDR_BROADCAST)
+			return -EADDRNOTAVAIL;
+
+		sa->family = AF_IEEE802154;
+		sa->addr.addr_type = IEEE802154_ADDR_SHORT;
+		sa->addr.pan_id = pan_id;
+		sa->addr.short_addr = short_addr;
+		return 0;
+	}
+	return -ENOIOCTLCMD;
+}
+
+static int ieee802154_fake_mac_addr(struct net_device *dev, void *p)
+{
+	return -EBUSY; /* HW address is built into the device */
+}
+
+static const struct net_device_ops fake_ops = {
+	.ndo_open		= ieee802154_fake_open,
+	.ndo_stop		= ieee802154_fake_close,
+	.ndo_start_xmit		= ieee802154_fake_xmit,
+	.ndo_do_ioctl		= ieee802154_fake_ioctl,
+	.ndo_set_mac_address	= ieee802154_fake_mac_addr,
+};
+
+static void ieee802154_fake_destruct(struct net_device *dev)
+{
+	struct wpan_phy *phy = fake_to_phy(dev);
+
+	wpan_phy_unregister(phy);
+	free_netdev(dev);
+	wpan_phy_free(phy);
+}
+
+static void ieee802154_fake_setup(struct net_device *dev)
+{
+	dev->addr_len		= IEEE802154_ADDR_LEN;
+	memset(dev->broadcast, 0xff, IEEE802154_ADDR_LEN);
+	dev->features		= NETIF_F_HW_CSUM;
+	dev->needed_tailroom	= 2; /* FCS */
+	dev->mtu		= 127;
+	dev->tx_queue_len	= 10;
+	dev->type		= ARPHRD_IEEE802154;
+	dev->flags		= IFF_NOARP | IFF_BROADCAST;
+	dev->watchdog_timeo	= 0;
+	dev->destructor		= ieee802154_fake_destruct;
+}
+
+
+static int __devinit ieee802154fake_probe(struct platform_device *pdev)
+{
+	struct net_device *dev;
+	struct fakehard_priv *priv;
+	struct wpan_phy *phy = wpan_phy_alloc(0);
+	int err;
+
+	if (!phy)
+		return -ENOMEM;
+
+	dev = alloc_netdev(sizeof(struct fakehard_priv), "hardwpan%d", ieee802154_fake_setup);
+	if (!dev) {
+		wpan_phy_free(phy);
+		return -ENOMEM;
+	}
+
+	memcpy(dev->dev_addr, "\xba\xbe\xca\xfe\xde\xad\xbe\xef",
+			dev->addr_len);
+	memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
+
+	/*
+	 * For now we'd like to emulate 2.4 GHz-only device,
+	 * both O-QPSK and CSS
+	 */
+	/* 2.4 GHz O-QPSK 802.15.4-2003 */
+	phy->channels_supported[0] |= 0x7FFF800;
+	/* 2.4 GHz CSS 802.15.4a-2007 */
+	phy->channels_supported[3] |= 0x3fff;
+
+	phy->transmit_power = 0xbf;
+
+	dev->netdev_ops = &fake_ops;
+	dev->ml_priv = &fake_mlme;
+
+	priv = netdev_priv(dev);
+	priv->phy = phy;
+
+	wpan_phy_set_dev(phy, &pdev->dev);
+	SET_NETDEV_DEV(dev, &phy->dev);
+
+	platform_set_drvdata(pdev, dev);
+
+	err = wpan_phy_register(phy);
+	if (err)
+		goto out;
+
+	err = register_netdev(dev);
+	if (err < 0)
+		goto out;
+
+	dev_info(&pdev->dev, "Added ieee802154 HardMAC hardware\n");
+	return 0;
+
+out:
+	unregister_netdev(dev);
+	return err;
+}
+
+static int __devexit ieee802154fake_remove(struct platform_device *pdev)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+	unregister_netdev(dev);
+	return 0;
+}
+
+static struct platform_device *ieee802154fake_dev;
+
+static struct platform_driver ieee802154fake_driver = {
+	.probe = ieee802154fake_probe,
+	.remove = __devexit_p(ieee802154fake_remove),
+	.driver = {
+			.name = "ieee802154hardmac",
+			.owner = THIS_MODULE,
+	},
+};
+
+static __init int fake_init(void)
+{
+	ieee802154fake_dev = platform_device_register_simple(
+			"ieee802154hardmac", -1, NULL, 0);
+	return platform_driver_register(&ieee802154fake_driver);
+}
+
+static __exit void fake_exit(void)
+{
+	platform_driver_unregister(&ieee802154fake_driver);
+	platform_device_unregister(ieee802154fake_dev);
+}
+
+module_init(fake_init);
+module_exit(fake_exit);
+MODULE_LICENSE("GPL");